Aptamer-Based Label-Free Immunosensors Using Carbon Nanotube Field-Effect Transistors

Fast determination of the tetracyclines in milk samples by the aptamer biosensor

A novel aptamer biosensor for fast tetracyclines determination was established and illustrated in this paper. The tetracyclines aptamer as a specific affinity molecule was immobilized on the surface of the glassy carbon (GC) electrodes. It can specifically bind tetracyclines quickly in milk and other samples without sample treatment. Subsequently, the electrochemical signals are produced and measured accurately. The linear relationship between the currents and the tetracyclines concentration is 0.1-100 ng ml(-1). The sensitivity limit of the device is 1 ng ml(-1). The detection time is 5 min.

Chemical and biological sensing applications based on graphene field-effect transistors

Chemical and biological sensors based on graphene field-effect transistors (G-FETs) were investigated. A single-layer of graphene was prepared by mechanical cleavage of natural graphite. The G-FETs were driven by a reference-gate operating in buffer solution, and exhibited very good transport characteristics. The G-FETs detected the pH value of the solution with high precision. The Dirac point shifted in the positive direction with increasing pH of the solution. The detection limit (signal/noise=3) for measuring changes in the pH of the solution was estimated to be 0.025, indicating the high sensitivity of the G-FETs. Moreover, the devices electrically detected proteins with different charge types. The drain current decreased (increased) when positively (negatively) charged proteins were added to the solution. These results indicate that the G-FETs are among the most suitable candidates for FET-based chemical and biological sensors.

Review: Carbon nanotube based electrochemical sensors for biomolecules

Carbon nanotubes (CNTs) have been incorporated in electrochemical sensors to decrease overpotential and improve sensitivity. In this review, we focus on recent literature that describes how CNT-based electrochemical sensors are being developed to detect neurotransmitters, proteins, small molecules such as glucose, and DNA. Different types of electrochemical methods are used in these sensors including direct electrochemical detection with amperometry or voltammetry, indirect detection of an oxidation product using enzyme sensors, and detection of conductivity changes using CNT-field effect transistors (FETs). Future challenges for the field include miniaturizing sensors, developing methods to use only a specific nanotube allotrope, and simplifying manufacturing.

Aptamer-functionalized nano-biosensors

Nanomaterials have become one of the most interesting sensing materials because of their unique size- and shape-dependent optical properties, high surface energy and surface-to-volume ratio, and tunable surface properties. Aptamers are oligonucleotides that can bind their target ligands with high affinity. The use of nanomaterials that are bioconjugated with aptamers for selective and sensitive detection of analytes such as small molecules, metal ions, proteins, and cells has been demonstrated. This review focuses on recent progress in the development of biosensors by integrating functional aptamers with different types of nanomaterials, including quantum dots, magnetic nanoparticles (NPs), metallic NPs, and carbon nanotubes. Colorimetry, fluorescence, electrochemistry, surface plasmon resonance, surface-enhanced Raman scattering, and magnetic resonance imaging are common detection modes for a broad range of analytes with high sensitivity and selectivity when using aptamer bioconjugated nanomaterials (Apt-NMs). We highlight the important roles that the size and concentration of nanomaterials, the secondary structure and density of aptamers, and the multivalent interactions play in determining the specificity and sensitivity of the nanosensors towards analytes. Advantages and disadvantages of the Apt-NMs for bioapplications are focused.

Electrolyte-gated graphene field-effect transistors for detecting pH and protein adsorption

We investigated electrolyte-gated graphene field-effect transistors (GFETs) for electrical detecting pH and protein adsorptions. Nonfunctionalized single-layer graphene was used as a channel. GFETs immersed in an electrolyte showed transconductances 30 times higher than those in a vacuum and their conductances exhibited a direct linear increase with electrolyte pH, indicating their potential for use in pH sensor applications. We also attempted to direct surface-protein adsorption and showed that the conductance of GFETs increased with exposure to a protein at several hundred picomolar. The GFETs thus acted as highly sensitive electrical sensors for detecting pH and biomolecule concentrations.

Label-free electrical detection using carbon nanotube-based biosensors

Label-free detections of biomolecules have attracted great attention in a lot of life science fields such as genomics, clinical diagnosis and practical pharmacy. In this article, we reviewed amperometric and potentiometric biosensors based on carbon nanotubes (CNTs). In amperometric detections, CNT-modified electrodes were used as working electrodes to significantly enhance electroactive surface area. In contrast, the potentiometric biosensors were based on aptamer-modified CNT field-effect transistors (CNTFETs). Since aptamers are artificial oligonucleotides and thus are smaller than the Debye length, proteins can be detected with high sensitivity. In this review, we discussed on the technology, characteristics and developments for commercialization in label-free CNT-based biosensors.