Recent advances in immobilized enzymatic reactors and their applications in proteome analysis

New development in in-capillary electrophoresis techniques for kinetic and inhibition study of enzymes

Enzymes are often quantified by measuring their biological activity. Capillary electrophoresis is gaining its position in this field due to the ongoing trend to miniaturize biochemical assays. The aim of this work was to compare pre-capillary (off-line) and in-capillary electrophoresis techniques for studying enzymatic activity. The β-galactosidase (β-Gal) was chosen as a model enzyme. Each technique was optimized independently in order to decrease analyte consumption (to few tens of nanoliters), incubation time (to few seconds) and analysis time (below 1 min). Several experimental parameters (ionic strength of the background electrolyte (BGE) and of the incubation buffer, incubation time, injected volumes, …) were optimized by following peak efficiencies, resolution and repeatability. To monitor the performance of each technique, the catalytic constants (V(max) and K(m)) of 4-nitro-phenyl-d-galactopyranoside (PNPG) hydrolysis by β-Gal as well as the inhibition constants (K(i) and IC(50)) by a competitive inhibitor 2-nitrophenyl-1-thio-β-d-thiogalactopyranoside (ONPTG) were determined. The results obtained were cross compared and were also evaluated by comparison to a standard spectrophotometric method. EMMA proved to be the best technique in terms of sample consumption and speed. The short-end injection was successfully used which speeded-up electrophoretic analysis (<0.8 min). It is a very powerful tool for studying enzymatic inhibition. Usually, the inhibitor is injected in the capillary mixed to the substrate especially when both have similar mobilities. We show in this work, for the first time, that combining at-inlet reaction with EMMA-CE allows enzyme inhibition to be realized without any prior mixing of the substrate and the inhibitor. This approach is very interesting for screening inhibitors, rapidly and without excessive substrate consumption.

A monolithic lipase reactor for biodiesel production by transesterification of triacylglycerides into fatty acid methyl esters

An enzymatic reactor with lipase immobilized on a monolithic polymer support has been prepared and used to catalyze the transesterification of triacylglycerides into the fatty acid methyl esters commonly used for biodiesel. A design of experiments procedure was used to optimize the monolithic reactor with variables including control of the surface polarity of the monolith via variations in the length of the hydrocarbon chain in alkyl methacrylate monomer, time of grafting of 1-vinyl-4,4-dimethylazlactone used to activate the monolith, and time used for the immobilization of porcine lipase. Optimal conditions involved the use of a poly(stearyl methacrylate-co-ethylene dimethacrylate) monolith, grafted first with vinylazlactone, then treated with lipase for 2 h to carry out the immobilization of the enzyme. Best conditions for the transesterification of glyceryl tributyrate included a temperature of 37°C and a 10 min residence time of the substrate in the bioreactor. The reactor did not lose its activity even after pumping through it a solution of substrate equaling 1,000 reactor volumes. This enzymatic reactor was also used for the transesterification of triacylglycerides from soybean oil to fatty acid methyl esters thus demonstrating the ability of the reactor to produce biodiesel.

Limited proteolysis in proteomics using protease-immobilized microreactors

Proteolysis is the key step for proteomic studies integrated with MS analysis. Compared with the conventional method of in-solution digestion, proteolysis by a protease-immobilized microreactor has a number of advantages for proteomic analysis; i.e., rapid and efficient digestion, elimination of a purification step of the digests prior to MS, and high stability against a chemical or thermal denaturant. This chapter describes the preparation of the protease-immobilized microreactors and proteolysis performance of these microreactors. Immobilization of proteases by the formation of a polymeric membrane consisting solely of protease-proteins on the inner wall of the microchannel is performed. This was realized either by a cross-linking reaction in a laminar flow between lysine residues sufficiently present on the protein surfaces themselves or in the case of acidic proteins by mixing them with poly-lysine prior to the crosslink-reaction. The present procedure is simple and widely useful not only for proteases but also for several other enzymes.

In mesopore protein digestion: a new forthcoming strategy in proteomics

The conventional protocols for in solution or in gel protein digestion require many steps and long reaction times. The use of trypsin immobilized onto solid supports has recently captured the attention of many research groups, because these systems can speed-up protein digestion significantly. The utilization of new materials such as mesoporous silica as supports, in which enzyme and substrate are dramatically concentrated and confined in the nanospace, offers new opportunities to reduce the complexity of proteomics workflows. An overview of the procedures for in situ proteolysis of single proteins or complex protein mixtures is reported, with a special focus on porous materials used as catalysts. The challenging efforts for designing such systems aimed at mimicking the biochemistry of living cells are reviewed. Potentials, limitations and challenges of this branch of enzyme catalysis, which we indicate as in mesopore digestion, are discussed, in relation to its suitability for high-speed and high-throughput proteomics.

A solid-phase bioreactor with continuous sample deposition for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

We report the development of a solid-phase proteolytic digestion and continuous deposition microfluidic chip platform for low volume fraction collection and off-line matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry. Tryptic peptides were formed in an on-chip bioreactor and continuously deposited onto a MALDI target plate using a motor-driven xyz stage. The bioreactor consisted of a 4 cm × 200 µm × 50 µm microfluidic channel with covalently immobilized trypsin on an array of 50 µm diameter micropost structures with a 50 µm edge-to-edge inter-post spacing. A 50 µm i.d. capillary tube was directly attached to the end of the bioreactor for continuous sample deposition. The MALDI target plate was modified by spin-coating a nitrocellulose solution containing a MALDI matrix on the surface prior to effluent deposition. Protein molecular weight standards were used for evaluating the performance of the digestion and continuous deposition system. Serpentine sample traces 200 µm wide were obtained with a 30 fmol/mm quantity deposition rate and a 3.3 nL/mm volumetric deposition rate.

Rapid fabrication of glass/PDMS hybrid µIMER for high throughput membrane proteomics

Mass spectrometry (MS) based proteomics has brought a radical approach to systems biology, offering a platform to study complex biological functions. However, key proteomic technical challenges remain, mainly the inability to characterise the complete proteome of a cell due to the thousands of diverse, complex proteins expressed at an extremely wide concentration range. Currently, high throughput and efficient techniques to unambiguously identify and quantify proteins on a proteome-wide scale are in demand. Miniaturised analytical systems placed upstream of MS help us to attain these goals. One time-consuming step in traditional techniques is the in-solution digestion of proteins (4-20 h). This also has other drawbacks, including enzyme autoproteolysis, low efficiency, and manual operation. Furthermore, the identification of α-helical membrane proteins has remained a challenge due to their high hydrophobicity and lack of trypsin cleavage targets in transmembrane helices. We demonstrate a new rapidly produced glass/PDMS micro Immobilised Enzyme Reactor (µIMER) with enzymes covalently immobilised onto polyacrylic acid plasma-modified surfaces for the purpose of rapidly (as low as 30 s) generating peptides suitable for MS analysis. This µIMER also allows, for the first time, rapid digestion of insoluble proteins. Membrane protein identification through this method was achieved after just 4 min digestion time, up to 9-fold faster than either dual-stage in-solution digestion approaches or other commonly used bacterial membrane proteomic workflows.

Nanobiocatalysis for protein digestion in proteomic analysis

The process of protein digestion is a critical step for successful protein identification in bottom-up proteomic analyses. To substitute the present practice of in-solution protein digestion, which is long, tedious, and difficult to automate, many efforts have been dedicated for the development of a rapid, recyclable and automated digestion system. Recent advances of nanobiocatalytic approaches have improved the performance of protein digestion by using various nanomaterials such as nanoporous materials, magnetic nanoparticles, and polymer nanofibers. Especially, the unprecedented success of trypsin stabilization in the form of trypsin-coated nanofibers, showing no activity decrease under repeated uses for 1 year and retaining good resistance to proteolysis, has demonstrated its great potential to be employed in the development of automated, high-throughput, and on-line digestion systems. This review discusses recent developments of nanobiocatalytic approaches for the improved performance of protein digestion in speed, detection sensitivity, recyclability, and trypsin stability. In addition, we also introduce approaches for protein digestion under unconventional energy input for protein denaturation and the development of microfluidic enzyme reactors that can benefit from recent successes of these nanobiocatalytic approaches.

Advances in capillary electrophoretic enzyme assays

In recent years, capillary electrophoresis (CE) has become a frequently used tool for enzyme assays due to its well-recognized advantages such as high separation efficiency, short analysis time, small sample and chemicals consumption. The published applications cover all aspects of enzyme characterization and analysis including the determination of the enzyme activity, substrate and modulator characterization and identification, as well as the investigation of enzyme-mediated metabolic pathways of bioactive molecules. The CE assays may be classified into two general categories: (1) pre-capillary assays where the reactions are performed offline followed by CE analysis of the substrates and products and (2) online assays when the enzyme reaction and separation of the analytes are performed in the same capillary. In online assays, the enzyme may be either immobilized or in solution. The latter is also referred to as electrophoretically mediated microanalysis (EMMA). The present review will highlight the literature of CE-based enzyme assays from 2006 to November 2009. One section will be devoted to applications of microfluidic devices.

Rapid and efficient proteolysis for proteomic analysis by protease-immobilized microreactor

Proteolysis is an important part of protein identification in proteomics analysis. The conventional method of in-solution digestion of proteins is time-consuming and has limited sensitivity. In this study, trypsin- or alpha-chymotrypsin-immobilized microreactors prepared by a microfluidics-based enzyme-immobilization technique were studied for rapid sample preparation in proteomic analysis. The kinetic studies for hydrolysis of substrate by microreactors revealed that immobilized proteases had higher hydrolytic efficiency than those performed by in-solution digestion. The performance of the microreactors was evaluated by digesting cytochrome c and BSA. Protein digestion was achieved within a short period of time (approximately 5 min) at 30 degrees C without any complicated reduction and alkylation procedures. The efficiency of digestion by trypsin-immobilized reactor was evaluated by analyzing the sequence coverage, which was 47 and 12% for cytochrome c and BSA, respectively. These values were higher than those performed by in-solution digestion. Besides, because of higher stability against high concentration of denaturant, the microreactors can be useful for immediate digestion of the denaturated protein. In the present study, we propose a protease-immobilized microreactor digestion method, which can utilize as a proteome technique for biological and clinical research.