Towards sustainable management of polyacrylamide in soil-water environment: Occurrence, degradation, and risk

Polyacrylamide (PAM) possesses unique characteristics, including high water solubility, elevated viscosity and effective flocculation capabilities. These properties make it valuable in various sectors like agriculture, wastewater treatment, enhanced oil recovery, and mineral processing industries, contributing to a continually expanding market. Despite its widespread use globally, understanding its environmental fate at the soil-water interface remains limited. This article aims to provide an overview of the occurrence, degradation pathways, toxicity, and risks associated with PAM in the bioenvironment. The findings indicate that various degradation pathways of PAM may occur in the bioenvironment through mechanical, thermal, chemical, photocatalytic degradation, and/or biodegradation. Through a series of degradation processes, PAM initially transforms into oligomers and acrylamide (AM). Subsequently, AM may undergo biodegradation, converting into acrylic acid (AA) and other compounds such as ammonia. Notably, among these degradation intermediates, AM demonstrates high biodegradability, and the bioaccumulations of both AM and AA are not considered significant. Ensuring the sustainable use of PAM necessitates a comprehensive understanding among policymakers, scholars, and industry professionals regarding PAM, encompassing its properties, applications, degradation pathways, toxic effect on humans and the environment, and relevant regulations. Additionally, this study offers insights into future priority research directions, such as establishing of a reliable source-to-destination supply chain system, determining the maximum allowable amount for PAM in farmlands, and conducting long-term trials for the PAM-containing demolition residues.

Bioanalytical technologies using temperature-responsive polymers

In recent decades, various bioanalytical technologies have been investigated for appropriate medical treatment and effective therapy. Temperature-responsive chromatography is a promising bioanalytical technology owing to its functional properties. Temperature-responsive chromatography uses a poly(N-isopropylacrylamide)(PNIPAAm) modified stationary phase as the column packing material. The hydrophobic interactions between PNIPAAm and the analyte could be modulated by changing the column temperature because of the temperature-responsive hydrophobicity of PNIPAAm. Thus, the chromatography system does not require organic solvents in the mobile phase, making it suitable for therapeutic drug monitoring in medical settings such as hospitals. This review summarizes recent developments in temperature-responsive chromatography systems for therapeutic drug monitoring applications. In addition, separation methods for antibody drugs using PNIPAAm are also summarized because these methods apply to the therapeutic drug monitoring of biopharmaceutics. The temperature-responsive chromatography systems can also be utilized for clinical diagnosis, as they can assess multiple medicines simultaneously. This highlights the significant potential of temperature-responsive chromatography in medicine and healthcare.

Dimensional accuracy and simulation-based optimization of polyolefins and biocopolyesters for extrusion-based additive manufacturing and steam sterilization

Polyolefins exhibit robust mechanical and chemical properties and can be applied in the medical field, e.g. for the manufacturing of dentures. Despite their wide range of applications, they are rarely used in extrusion-based printing due to their warpage tendency. The aim of this study was to investigate and reduce the warpage of polyolefins compared to commonly used filaments after additive manufacturing (AM) and sterilization using finite element simulation. Three types of filaments were investigated: a medical-grade polypropylene (PP), a glass-fiber reinforced polypropylene (PP-GF), and a biocopolyester (BE) filament, and they were compared to an acrylic resin (AR) for material jetting. Square specimens, standardized samples prone to warpage, and denture bases (n = 10 of each group), as clinically relevant and anatomically shaped reference, were digitized after AM and steam sterilization (134 °C). To determine warpage, the volume underneath the square specimens was calculated, while the deviations of the denture bases from the printing file were measured using root mean square (RMS) values. To reduce the warpage of the PP denture base, a simulation of the printing file based on thermomechanical calculations was performed. Statistical analysis was conducted using the Kruskal-Wallis test, followed by Dunn's test for multiple comparisons. The results showed that PP exhibited the greatest warpage of the square specimens after AM, while PP-GF, BE, and AR showed minimal warpage before sterilization. However, warpage increased for PP-GF, BE and AR during sterilization, whereas PP remained more stable. After AM, denture bases made of PP showed the highest warpage. Through simulation-based optimization, warpage of the PP denture base was successfully reduced by 25%. In contrast to the reference materials, PP demonstrated greater dimensional stability during sterilization, making it a potential alternative for medical applications. Nevertheless, reducing warpage during the cooling process after AM remains necessary, and simulation-based optimization holds promise in addressing this issue.

The clinical performance of dental resin composite repeatedly preheated: A randomized controlled clinical trial

OBJECTIVES

To assess the clinical performance of class II restorations performed by repeatedly preheated resin composite "RC" at 68 °C up to ten times.

METHODS

105 patients were selected and randomized into three groups, each comprising 35 patients. Each patient was provided with a single class II Bulk-fill resin composite "BF-RC" posterior restoration based on the number of preheating cycles; group I (H0): The BF-RC was packed non-heated, group II (H1): BF-RC preheated once, and group III(H10): BF-RC preheated ten cycles. These restorations were evaluated at 1, 3,6, and 12 months, using the modified United States Public Health Service "USPHS". Statistical analysis was performed using Kruskal-Wallis test, Mann Whitney U test, and Friedmann test, where p = 0.05.

RESULTS

All the 105 restorations did not suffer from any clinical situation that recommended replacement regarding retention, fracture, secondary caries, or anatomical form. Although all performed restorations did have Alpha and Bravo scores with good clinical performance, the non-preheated RC restorations"" suffered from relatively inferior clinical performance through the follow-up period regarding marginal adaptation, marginal discoloration, and color matching when compared to preheated groups. One and ten times of preheating conducted better clinical performance.

CONCLUSIONS

After 12-months follow-up, although no restoration needed replacement or repair in the 3 tested groups, restorations with single and ten times of preheating aided in better clinical performance of RC restorations compared to the non-preheated restorations. Preheating of RC for 10 times could be used safely with good clinical performance of restorations.

CLINICAL SIGNIFICANCE

By continually preheating RC syringe up to ten times, the dentist will not only benefit from the enhanced clinical performance and easiness of application but also will use preheated RC syringes without hesitation, relying on the absence of drawbacks related to multiple preheating cycles.

Evaluation of surface roughness, wettability and adhesion of multispecies biofilm on 3D-printed resins for the base and teeth of complete dentures

OBJECTIVE

This study evaluated the surface roughness, wettability and adhesion of multispecies biofilms (Candida albicans, Staphylococcus aureus and Streptococcus mutans) on 3D-printed resins for complete denture bases and teeth compared to conventional resins (heat-polymerized acrylic resin; artificial pre-fabricated teeth).

METHODOLOGY

Circular specimens (n=39; 6.0 mm Ø × 2.0 mm) of each group were subjected to roughness (n=30), wettability (n=30) and biofilm adhesion (n=9) tests. Three roughness measurements were taken by laser confocal microscopy and a mean value was calculated. Wettability was evaluated by the contact angle of sessile drop method, considering the mean of the three evaluations per specimen. In parallel, microorganism adhesion to resin surfaces was evaluated using a multispecies biofilm model. Microbial load was evaluated by determining the number of Colony Forming Units (CFU/mL) and by scanning electron microscopy (SEM). Data were subjected to the Wald test in a generalized linear model with multiple comparisons and Bonferroni adjustment, as well as two-way ANOVA (α=5%).

RESULTS

The roughness of the conventional base resin (0.01±0.04) was lower than that of the conventional tooth (0.14±0.04) (p=0.023) and 3D-printed base (0.18±0.08) (p<0.001). For wettability, conventional resin (84.20±5.57) showed a higher contact angle than the 3D-printed resin (60.58±6.18) (p<0.001). Higher microbial loads of S. mutans (p=0.023) and S. aureus (p=0.010) were observed on the surface of the conventional resin (S. mutans: 5.48±1.55; S. aureus: 7.01±0.57) compared to the 3D-printed resin (S. mutans: 4.11±1.96; S. aureus: 6.42±0.78). The adhesion of C. albicans was not affected by surface characteristics. The conventional base resin showed less roughness than the conventional dental resin and the printed base resin.

CONCLUSION

The 3D-printed resins for base and tooth showed less hydrophobicity and less adhesion of S. mutans and S. aureus than conventional resins.

Block Copolymers of Polyolefins with Polyacrylates: Analyzing and Improving the Blocking Efficiencies Using MILRad/ATRP Approach

Despite their industrial ubiquity, polyolefin-polyacrylate block copolymers are challenging to synthesize due to the distinct polymerization pathways necessary for respective blocks. This study utilizes MILRad, metal-organic insertion light-initiated radical polymerization, to synthesize polyolefin-b-poly(methyl acrylate) copolymer by combining palladium-catalyzed insertion-coordination polymerization and atom transfer radical polymerization (ATRP). Brookhart-type Pd complexes used for the living polymerization of olefins are homolytically cleaved by blue-light irradiation, generating polyolefin-based macroradicals, which are trapped with functional nitroxide derivatives forming ATRP macroinitiators. ATRP in the presence of Cu(0), that is, supplemental activators and reducing agents , is used to polymerize methyl acrylate. An increase in the functionalization efficiency of up to 71% is demonstrated in this study by modifying the light source and optimizing the radical trapping condition. Regardless of the radical trapping efficiency, essentially quantitative chain extension of polyolefin-Br macroinitiator with acrylates is consistently demonstrated, indicating successful second block formation.

Porous Poly(ionic Liquid) Membrane with Metal Nanoparticle Gradient: A Smart Actuator for Visualizing Chemical Reactions

Poly(ionic liquid) (PIL)-based porous membranes are extensively investigated as soft polymer actuators. While PILs have shown significant advancements in membrane fabrication and stabilization of metal nanoparticles (MNPs), research on integrating MNPs into porous membranes to achieve actuation behavior under multiple stimuli is limited. Herein, this work presents a new paradigm for designing a porous PIL-polyacrylic acid (PAA) membrane with a distinct MNP gradient via a top-bottom diffusion approach involving a metal salt precursor solution and NaBH4 as a reducing agent. The strong binding sites provided by PILs, combined with the gradient distribution of -COO- groups across the membrane cross-section, play a significant role in controlling the MNPs' gradient distribution. Interestingly, the MNPs within the membrane display excellent catalytic activity in exothermic reactions such as H2O2 decomposition, dissipating uneven heat that quickly permeates the membrane network. This induces asymmetrical swelling of polymer chains, resulting in rapid membrane bending. Furthermore, such MNP-loaded membrane could serve as a portable test paper for visually monitoring H2O2. This advancement paves the way for the development of intricate smart actuation materials and expands their practical applications in various real-life scenarios.

Microgel-Crosslinked Thermo-Responsive Hydrogel Actuators with High Mechanical Properties and Rapid Response

Smart hydrogels responsive to external stimuli are promising for various applications such as soft robotics and smart devices. High mechanical strength and fast response rate are particularly important for the construction of hydrogel actuators. Herein, tough hydrogels with rapid response rates are synthesized using vinyl-functionalized poly(N-isopropylacrylamide) (PNIPAM) microgels as macro-crosslinkers and N-isopropylacrylamide as monomers. The compression strength of the obtained PNIPAM hydrogels is up to 7.13 MPa. The response rate of the microgel-crosslinked hydrogels is significantly enhanced compared with conventional chemically crosslinked PNIPAM hydrogels. The mechanical strength and response rate of hydrogels can be adjusted by varying the proportion of monomers and crosslinkers. The lower critical solution temperature (LCST) of the PNIPAM hydrogels could be tuned by copolymerizing with ionic monomer sodium methacrylate. Thermo-responsive bilayer hydrogels are fabricated using PINPAM hydrogels with different LCSTs via a layer-by-layer method. The thermo-responsive fast swelling and shrinking properties of the two layers endow the bilayer hydrogel with anisotropic structures and asymmetric response characteristics, allowing the hydrogel to respond rapidly. The bilayer hydrogels are fabricated into clamps to grab small objects and flowers that mimicked the closure of petals, and it shows great application prospects in the field of actuators.

Cell Free Expression in Proteinosomes Prepared from Native Protein-PNIPAAm Conjugates

Towards the goal of building synthetic cells from the bottom-up, the establishment of micrometer-sized compartments that contain and support cell free transcription and translation that couple cellular structure to function is of critical importance. Proteinosomes, formed from crosslinked cationized protein-polymer conjugates offer a promising solution to membrane-bound compartmentalization with an open, semi-permeable membrane. Critically, to date, there has been no demonstration of cell free transcription and translation within water-in-water proteinosomes. Herein, a novel approach to generate proteinosomes that can support cell free transcription and translation is presented. This approach generates proteinosomes directly from native protein-polymer (BSA-PNIPAAm) conjugates. These native proteinosomes offer an excellent alternative as a synthetic cell chassis to other membrane bound compartments. Significantly, the native proteinosomes are stable under high salt conditions that enables the ability to support cell free transcription and translation and offer enhanced protein expression compared to proteinosomes prepared from traditional methodologies. Furthermore, the integration of native proteinosomes into higher order synthetic cellular architectures with membrane free compartments such as liposomes is demonstrated. The integration of bioinspired architectural elements with the central dogma is an essential building block for realizing minimal synthetic cells and is key for exploiting artificial cells in real-world applications.

Effect of different surface roughening treatment on polyether ether ketone and acrylic resin bonding: A pilot study

BACKGROUND

As polyether ether ketone (PEEK) is a relatively new material in dentistry, its bonding properties with regard to dental acrylic base materials are not fully known. To ensure the long-term success of removable dentures with a PEEK framework, the base materials must be well bonded to each other.

OBJECTIVES

The study aimed to investigate the effects of different kinds of surface roughening treatment on PEEK and acrylic resin bonding.

MATERIAL AND METHODS

Eighty PEEK specimens (N = 80) were randomly divided into 5 groups (n = 16 per group) and subjected to various surface roughening treatment (control, grinding, sandblasting, tribochemical silica coating (CoJet), and sulfuric acid etching). Heat-polymerized acrylic resin was applied to the treated surfaces of the PEEK specimens. The shear bond strength (SBS) test, environmental scanning electron microscopy (ESEM) analysis and three-dimensional (3D) surface topography analysis were performed. The statistical analysis of the data was conducted using the analysis of variance (ANOVA) and Tukey's multiple comparison test.

RESULTS

The one-way ANOVA showed significant differences in the SBS values between the groups (p = 0.001). Sandblasting, tribochemical silica coating and sulfuric acid etching resulted in high SBS values (p = 0.001). The highest SBS values were observed in the sulfuric acid etching group (8.83 ±3.63 MPa), while the lowest SBS values were observed in the control group (3.33 ±2.50 MPa).

CONCLUSIONS

The additional roughening treatment applied to the PEEK surface increases the bond strength with heat-polymerized acrylic resin.

Effect of Tea Tree Oil Addition to Denture Liners Against Candida albicans and Bond Strength to Acrylic Denture Bases

PURPOSE

To evaluate the effect of adding tea tree oil to denture liners on Candida albicans and bond strength to the acrylic denture base.

MATERIALS AND METHODS

Disc-shaped specimens were fabricated from silicone-based resilient liner (Tokuyama, Molloplast), acrylic-based hard liner (GC Reline), and acrylic-based soft liner (Visco-gel). Tea tree oil (TTO) was incorporated into the liners at varying concentrations (0% [control], 2%, 5%, 8%). C albicans were counted by viable colony count, and optical density (OD) was measured with a spectrophotometer. The tensile strength to heat polymerized acrylic denture base was measured in a universal testing machine. The compliance of the data to the distribution of normality was evaluated using the Shapiro Wilk test. Two-way ANOVA, Bonferroni correction, and paired sample t test were performed (α = .05).

RESULTS

The addition of TTO into liners provided a significant decrease in the OD values (P < .001). The control groups of the liners presented the highest colony counts, whereas increasing TTO decreased the results (P < .01). According to tensile bond strength test, 8% TTO addition resulted in a significant decrease for Tokuyama (P < .01) and Molloplast liners (P < .05), while 2% TTO resulted in significance for GC Reline (P < .001).

CONCLUSIONS

Denture liners containing increasing percentages of TTO presented lower amounts of C albicans colonies and decreased bond strength to the denture bases. When using TTO for its antifungal properties, the amount added should be carefully selected because the tensile bond strength may be affected.

Supramolecular Peptoid Structure Strengthens Complexation with Polyacrylic Acid Microgels

We have studied the complexation between cationic antimicrobials and polyanionic microgels to create self-defensive surfaces that responsively resist bacterial colonization. An essential property is the stable sequestration of the loaded (complexed) antimicrobial within the microgel under a physiological ionic strength. Here, we assess the complexation strength between poly(acrylic acid) [PAA] microgels and a series of cationic peptoids that display supramolecular structures ranging from an oligomeric monomer to a tetramer. We follow changes in loaded microgel diameter with increasing [Na+] as a measure of the counterion doping level. Consistent with prior findings on colistin/PAA complexation, we find that a monomeric peptoid is fully released at ionic strengths well below physiological conditions, despite its +5 charge. In contrast, progressively higher degrees of peptoid supramolecular structure display progressively greater resistance to salting out, which we attribute to the greater entropic stability associated with the complexation of multimeric peptoid bundles.

Microbiological, physicomechanical, and surface evaluation of an experimental self-curing acrylic resin containing halloysite nanotubes doped with chlorhexidine

OBJECTIVE

The objective was to synthesize halloysite nanotubes loaded with chlorhexidine (HNT/CHX) and evaluate the antimicrobial activity, microhardness, color change, and surface characteristics of an experimental self-curing acrylic resin containing varying concentrations of the synthesized nanomaterial.

METHODS

The characterization of HNT/CHX was carried out by calculating incorporation efficiency, morphological and compositional, chemical and thermal evaluations. SAR disks were made containing 0 %, 3 %, 5 %, and 10 % of HNT/CHX. Specimens (n = 3) were immersed in distilled water and spectral measurements were carried out using UV/Vis spectroscopy to evaluate the release of CHX for up to 50 days. The antimicrobial activity of the composite against Candida albicans and Streptococcus mutans was evaluated by disk-diffusion test. Microhardness, color analyses (ΔE), and surface roughness (Ra) (n = 9) were performed before and after 30 days of immersion. Data were analyzed using ANOVA/Bonferroni. {Results.} The incorporation efficiency of CHX into HNT was of 8.15 %. All test groups showed controlled and cumulative CHX release up to 30 or 50 days. Significant antimicrobial activity was verified against both microorganisms (p < 0.001). After the 30-day immersion period, the 10 % HNT/CHX group showed a significant increase in hardness (p < 0.05) and a progressive color change (p < 0.001). At T0, the 5 % and 10 % groups exhibited Ra values similar to the control group (p > 0.05), while at T30, all groups showed similar roughness values (p > 0.05). {Significance.} The modification of a SAR with HNT/CHX provides antimicrobial effect and controlled release of CHX, however, the immediate surface roughness in the 3 % group was compromised when compared to the control group.

Post-cure Heat Treatments Influence the Mechanical and Optical Properties of Acrylic and Bis-acryl Composite Resins

OBJECTIVE

To evaluate the influence of post-cure heat treatments (PCHT) on Knoop microhardness (KHN) and color change of bis-acryl composite resin (Protemp 4 - 3M ESPE, USA and PrimmaArt - FGM, Brazil) and chemically activated acrylic resins (Dencôr - Clássico, Brazil, and Duralay - Cotia, Brazil).

METHODS AND MATERIALS

Specimens (12×1 mm) were prepared for each material (n=10/group). Thirty minutes after curing, the specimens were subjected to PCHT for 10 minutes at 70°, 100°, or 130°C. The control group was kept at room temperature (24°C) for the same amount of time. KHN was analyzed 24 hours after PCHT (n=10). Following Commission Internationale de l'Éclairage (CIE) Delta E 2000 (CIEDE2000 [ΔE00]), color measurements were obtained at three time points: 1. after polymerization; 2. after PCHT; and 3. after 30 days of storage in water, coffee, or red wine. Data for each material were analyzed by one-way analysis of variance (ANOVA) (p<0.05).

RESULTS

The PCHT at 130°C produced the highest KHN values. Except for the 70°C groups from Dencôr and Protemp, all PCHTs increased the initial color values (p>0.05). In general, chemically activated acrylic resins showed an increase in color stability when subjected to PCHT (p>0.05). For bis-acryl composite resin, PCHT did not influence color stability (p<0.05).

CONCLUSION

Overall, the results showed that PCHT increased the tested materials' color changes and Knoop microhardness. However, except for PCHT at 130°C in Duralay, the color changes remained within acceptable values. The PCHT treatment resulted in better color stability for most of the composite resins studied.

A comparison of the shear bond strength between denture teeth and denture base resins manufactured either conventionally or with a 3D printer

STATEMENT OF PROBLEM

Limited information is available on the shear bond strength (SBS) between denture teeth and denture base resins fabricated using a stereolithography (SLA) 3-dimensional (3D) printer.

PURPOSE

The purpose of this in vitro study was to evaluate the SBS between denture teeth and the denture base resins produced with the conventional method and with a 3D printer.

MATERIAL AND METHODS

Conventional or 3D printed denture teeth were included in the study. The denture base resins were manufactured either conventionally or with a 3D printer. Four subgroups were tested: conventional teeth-conventional base resin (CT-CB), conventional teeth-printed base resin (CT-PB), printed teeth-conventional base resin (PT-CB), and printed teeth-printed base resin (PT-PB). The maxillary molars were combined with Ø5×2.5-mm-cylindrical denture base resin. Shear bond testing was performed by applying a parallel force to the denture teeth-denture base resin interface by using a blade-edge chisel with a crosshead speed of 1 mm/min until failure occurred. SBS and elastic modulus (EM) were recorded. One-way ANOVA followed by the Dunnett T3 post hoc test was used for the statistical analysis (α=.05). The failure modes of the specimens were also analyzed.

RESULTS

A statistically significant difference (P<.05) was found between the evaluated groups for the SBS and EM values. PT-PB showed the highest SBS value (15.4 ±2.7 MPa), and CT-PB showed the lowest (0.9 ±0.7 MPa). The PT-CB group showed the highest EM value (62.74 ±20.80 GPa), and the CT-PB group showed the lowest (29.46 ±28.40 GPa). The CT-CB and CT-PB specimens showed mostly adhesive failure; none of the PT-PB specimens showed adhesive failure.

CONCLUSIONS

Three-dimensional printing led to a better bond between the denture teeth and the denture base resin compared with the conventional method. Although these findings need to be supported by clinical studies, the use of 3D printers is appropriate in the production of denture teeth and denture bases.

Application of Laser Treatment in Adhesive Bonding of Liners to Polymethyl Methacrylate Denture Resins: A Systematic Review and Meta-Analysis

Objective: This systematic review and meta-analysis aimed to assess the influence of laser treatment on adhesive bonding of liners to polymethyl methacrylate (PMMA) denture base resins. Methods: The focused question was: "Does the application of laser treatment (Intervention) influence the adhesive bonding strength (Outcome) of liners to PMMA denture base resins (Population) as compared with untreated or unconditioned surfaces (Control)?" In vitro and clinical reports as well as reports on influence of laser treatments on bonding strength of liners to PMMA denture resins in comparison with untreated surfaces were included. Reports without any control group[s], without any application of laser[s] for PMMA denture bases that did not utilize PMMA denture bases, and not evaluate bond strength of PMMA denture base resins were excluded. An electronic search was conducted on PubMed, Scopus, and Web of Science. Meta-analyses were performed for calculating the standard mean difference (SMD) with a 95% confidence interval (95% CI). Results: Nine of the 12 included studies found that laser irradiation treatment produced significant surface texture alterations of the PMMA denture base and improved the adhesion between the PMMA denture base and soft lining. According to the meta-analysis, tensile bond strength showed an SMD of -2.49% (95% CI: -3.89 to -1.08; p = 0.0005), suggesting a statistically significant difference between the control and test groups (i.e., favoring laser-treated samples than untreated samples). Regarding shear bond strength scores, the outcomes showed an SMD of -2.24% (95% CI: -3.79 to -0.69; p = 0.005), suggesting a statistically significant difference between the control and test groups (i.e., favoring laser-treated samples than untreated samples). Conclusions: Despite the high heterogeneity among the included studies, it can be concluded that laser treatment might improve the bonding strengths of liners to PMMA denture base resins as compared with untreated surfaces. To validate the aforementioned conclusions, further verification is required through the implementation of well-designed randomized controlled trials with large sample sizes.

An In Vitro Analysis of the Physical and Mechanical Behavior of a PEEK Component for an Implant-Supported and Retained Removable Dental Prosthesis

PURPOSE

To investigate the physical and mechanical behaviors of polyether ether ketone (PEEK) before and after thermocycling, as well as its potential use as a more durable prosthetic component for implant-supported and -retained removable dental prostheses (I-RDPs).

MATERIALS AND METHODS

Roughness and surface hardness were evaluated in specimens obtained using the subtractive method (n = 20) with a diameter of 9 mm and a thickness of 2 mm, and retention force was measured using attachments with a diameter of 4 mm and a height of 3 mm. For fatigue resistance testing, a polyurethane matrix with two ball abutment implants (MDL, Intra-Lock International) was used to simulate the mandibular alveolar ridge. A total of 40 attachments (n = 20 pairs) were placed in acrylic resin blocks using an analog technique for the direct clinical pickup of overdenture female attachments, then submitted to 2,900 insertion/removal cycles to simulate 24 months of overdenture use. Physical analyses were performed by Fourier-transform infrared spectroscopy (FTIR), x-ray diffraction (XRD), and differential scanning calorimetry (DSC) before and after thermocycling (5°C to 55°C for 10,000 cycles). After normal distribution was verified by Shapiro-Wilk test, one-way ANOVA was applied to analyze the surface roughness and hardness, and two-way ANOVA with Bonferroni adjustment was used to assess the retention force (α = .05).

RESULTS

Thermocycling did not change the PEEK surface roughness or hardness (P > .05). As for the retention force, the highest average was observed after the thermocycling test (P = .006).

CONCLUSION

Based on the FTIR, XRD, and DSC results, PEEK crystallinity decreased after thermocycling, and the physical and mechanical behaviors of this polymer were compatible with the proposed application, suggesting that PEEK is a component of greater durability for I-RDPs. Int J Prosthodont 2023;36:612-619.

Strategy for Nonenzymatic Harvesting of Cells via Decoupling of Adhesive and Disjoining Domains of Nanostructured Stimulus-Responsive Polymer Films

The nanostructured polymer film introduces a novel mechanism of nonenzymatic cell harvesting by decoupling solid cell-adhesive and soft stimulus-responsive cell-disjoining areas on the surface. The key characteristics of this architecture are the decoupling of adhesion from detachment and the impermeability to the integrin protein complex of the adhesive domains. This surface design eliminates inherent limitations of thermoresponsive coatings, namely, the necessity for the precise thickness of the coating, grafting or cross-linking density, and material of the basal substrate. The concept is demonstrated with nanostructured thermoresponsive films made of cell-adhesive epoxy photoresist domains and cell-disjoining poly(N-isopropylacrylamide) brush domains.

Physical analysis of an acrylic resin modified by metal and ceramic nanoparticles

BACKGROUND

Nanoparticles (NPs) have gained significant attention in various fields due to their unique properties and potential applications. Polymethyl methacrylate (PMMA) is an acrylic resin widely used in dentistry and medicine. However, the effect of different types of NP fillers on the physical properties of PMMA-based resins has not been thoroughly explored in the literature.

OBJECTIVES

The present study aimed to evaluate the effects of 3 different types of NP fillers on the physical properties of an experimental PMMA-based resin as a function of the NP content and concentration.

MATERIAL AND METHODS

Ten groups (n = 10) were designed. The specimens were composed of an acrylic resin, silicon dioxide (SiO2), cerium dioxide (CeO2), and titanium dioxide (TiO2) at the following ratios (wt%): group 1 (G1) - control; group 2 (G2) - 0.5% SiO2; group 3 (G3) - 1% SiO2; group 4 (G4) - 3% SiO2; group 5 (G5) - 0.5% CeO2; group 6 (G6) - 1% CeO2; group 7 (G7) - 3% CeO2; group 8 (G8) - 0.5% TiO2; group 9 (G9) - 1% TiO2; and group 10 (G10) - 3% TiO2. Transmission electron microscopy (TEM) was used to assess the quality of NP dispersion. Thermal stability was assessed with thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The effects of the abovementioned NPs on the properties of the resin were evaluated using the Archimedes principle for density, the Vickers hardness (VH) test and the impact strength (IS) test. Data analysis employed the oneand two-way analysis of variance (ANOVA), followed by Duncan's post hoc test at a significance level of 0.05.

RESULTS

Transmission electron microscopy showed partial NP dispersion. All types of NPs enhanced the mechanical properties of the acrylic resin except for IS, which was similar to that of the control group. Among the types of NPs, irrespective of the weight percentage, CeO2 showed higher thermal stability and higher IS for 0.5 wt% and 1 wt% as compared to other groups, as well as the highest values of density at 0.5 wt%, 1 wt% and 3 wt%. Titanium oxide at 1 wt% presented a higher VH as compared to other groups. The fracture pattern was the same for all groups.

CONCLUSIONS

Incorporating the tested NPs into the acrylic resin resulted in enhanced physical properties, primarily attributed to a lower NP content.

The effects of different surface treatments applied to milled PMMA denture base material on repair bond strength

The high cost of CAD/CAM systems and materials is a severe economic burden. Therefore, repair of CAD/CAM PMMA, selecting appropriate repair materials, and surface modifications are clinically important. This study aims to evaluate the shear bond strength of PMMA repair materials after various surface treatments on CAD/CAM PMMA denture base material. For this purpose, a total of 480 CAD/CAM PMMA denture base test specimens were manufactured. Then all test specimens were divided into 6 groups, and different surface treatments were applied. Group A: sandblasting, Group B: 4% hydro fluoric acid, Group C: tungsten carbide bur, Group D: dichloromethane + methyl methacrylate mixture, Group E: dichloromethane and methyl methacrylate, Group F: no surface treatment. Each group is then divided into 4 different subcategories; repair processes were performed using; heat-cured acrylic resin (n:20), auto-polymerized acrylic resin (n:20), gingiva composite (n:20), and CAD/CAM PMMA tooth material (n:20). After repairs, thermal aging was applied to half of the test specimens in each subcategory. The shear bond strength value was measured with a universal test device. Sandblasting group showed the highest surface roughness value in all test specimens (p < 0.001). Heat-cured acrylic resin with sandblasting exhibited the highest bond strength, while the untreated gingiva composite resin exhibited the lowest value. Thermal aging decreased bond strength in all repair materials (p < 0.001). Among the surface treatment groups, sandblasting with Al2O3 particles exhibited the highest surface roughness value and repair bond strength. The application of organic solvents to the surface increased the surface roughness and repair bond strength. Applying dichloromethane and methyl methacrylate monomer separately is more effective than applying it as a mixture. The ideal bonding among repair materials was obtained with heat-cured acrylic resin.

Viral contamination of acrylic resin removable denture bases in patients with COVID-19: A cross-sectional study

STATEMENT OF PROBLEM

Salivary gland ducts are one of the primary targets of severe acute respiratory syndrome coronavirus 2. Moreover, saliva contains minor and major salivary gland secretions and a combination of nasopharyngeal and lung secretions. The acrylic resin bases of complete or partial removable dentures have pores and provide a favorable environment for the growth of microorganisms.

PURPOSE

The purpose of this cross-sectional study was to investigate the presence of viral contamination of acrylic resin removable denture bases in patients with coronavirus disease 2019 (COVID-19).

MATERIAL AND METHODS

The acrylic resin denture bases (partial and complete) of 29 patients with COVID-19 who underwent treatment in the Infectious Diseases Department of Razi Hospital in Ghaemshahr, Mazandaran, Iran, were evaluated. Samples were collected from the intaglio surface of the prostheses by direct swabbing and coding and were evaluated in a laboratory for the presence or absence of coronavirus. The relationship between hospital polymerase chain reaction (PCR) and denture PCR and the relationship between denture type and denture PCR were evaluated with the Fisher exact test (α=.05).

RESULTS

Twenty-nine patients, age range 55 to 85 years, 18 women, 3 with partial dentures and 26 with complete dentures, were evaluated. The hospital PCR test was positive in 28 patients, while the denture PCR test was positive in 4 patients. No significant relationship was observed between the results of hospital PCR and denture PCR in patients with COVID-19 (P=.138). All 4 patients who tested positive for denture PCR had complete dentures. No significant relationship was found between denture type and denture PCR test results in patients with COVID-19 (P>999).

CONCLUSIONS

Despite the microporous structure of the acrylic resin base, no statistically significant viral contamination was observed.

Influence of postpolymerization time and atmosphere on the mechanical properties, degree of conversion, and cytotoxicity of denture bases produced by digital light processing

STATEMENT OF PROBLEM

Studies on the effects of postprocessing conditions on the physical properties, degree of conversion (DC), and biocompatibility of denture bases produced by digital light processing are lacking.

PURPOSE

The purpose of this in vitro study was to evaluate the effects of the atmosphere during postpolymerization and of postpolymerization time on the flexural strength, Vickers hardness, DC, cytotoxicity, and residual monomer content of denture bases.

MATERIAL AND METHODS

Six different groups of bar- and disk-shaped specimens from the denture base resin were produced, considering 2 different atmospheres (air and nitrogen) and 3 different postpolymerization times (5, 10, and 20 minutes). To determine the physical properties, the flexural strength and Vickers hardness were measured. Fourier transform infrared spectrometry was used to calculate DC. Cytotoxicity was assessed from the effect on human gingival fibroblasts. The residual monomer content was determined by using high-performance liquid chromatography. Based on the normality test by the Shapiro-Wilk method, a nonparametric factorial analysis of variances was conducted (α=.05).

RESULTS

A significant interaction was detected between the atmosphere and postpolymerization time for hardness (P<.001) but no interaction for strength, DC, or cytotoxicity (P=.826, P=.786, and P=.563, respectively). Hardness was significantly affected by the postpolymerization time in the groups with the nitrogen atmosphere (P<.001). DC was significantly affected by the atmosphere (P=.012), whereas strength and cytotoxicity were not (P=.500 and P=.299, respectively). Cytotoxicity was significantly affected by the postpolymerization time (P<.001), but strength and DC were not (P=.482 and P=.167, respectively). Residual monomers were not detected after ≥10-minute postpolymerization time.

CONCLUSIONS

The atmosphere significantly affected hardness and DC, whereas the postpolymerization time significantly affected hardness, DC, cytotoxicity, and residual monomer content. Denture bases produced in a nitrogen atmosphere and with the 10-minute postpolymerization time showed sufficient hardness, DC, and no cytotoxicity.

Material extrusion of thermoplastic acrylic for intraoral devices: Technical feasibility and evaluation

With global demand for 3D printed medical devices on the rise, the search for safer, inexpensive, and sustainable methods is timely. Herein, we assessed the practicality of the material extrusion process for acrylic denture bases of which successful outcomes can be extended to implant surgical guides, orthodontic splints, impression trays, record bases and obturators for cleft palates or other maxillary defects. Representative materials comprising denture prototypes and test samples were designed and built with in-house polymethylmethacrylate filaments using varying print directions (PDs), layer heights (LHs) and reinforcements (RFs) with short glass fiber. The study undertook a comprehensive evaluation of the materials to determine their flexural, fracture, and thermal properties. Additional analyses for tensile and compressive properties, chemical composition, residual monomer, and surface roughness (Ra) were completed for parts with optimum parameters. Micrographic analysis of the acrylic composites revealed adequate fiber-matrix compatibility and predictably, their mechanical properties improved simultaneously with RFs and decreased LHs. Fiber reinforcement also improved the overall thermal conductivity of the materials. Ra, on the other hand, improved visibly with decreased RFs and LHs and the prototypes were effortlessly polished and characterized with veneering composites to mimic gingival tissues. In terms of chemical stability, the residual methyl methacrylate monomer contents are well below standards threshold for biological reactions. Notably, 5 vol% acrylic composites built with 0.05 mm LH in 0° on z-axis produced optimum properties that are superior to those of conventional acrylic, milled acrylic and 3D printed photopolymers. Finite element modeling successfully replicated the tensile properties of the prototypes. It may well be argued that the material extrusion process is cost-effective; however, the speed of manufacturing could be longer than that of established methods. Although the mean Ra is within an acceptable range, mandatory manual finishing and aesthetic pigmentation are required for long-term intraoral use. At a proof-of-concept level, it is evident that the material extrusion process can be applied to build inexpensive, safe, and robust thermoplastic acrylic devices. The broad outcomes of this novel study are equally worthy of academic reflection, and further translation to the clinic.

Investigation of the effect of different surface treatments for preventing detachment of polyetheretherketone and titanium attachment matrix housings in overdentures: An in vitro study

Aim

The attachment matrix housing (AMH) of implant overdentures is not chemically bonded with acrylic resins. Therefore, AMH may lose due to insertion and removal forces. This study aims to investigate the effects of different surface treatments to reduce the detachment of AMH and to compare the adhesion of the AMH used in implant-supported overdentures made of different materials with the reline acrylic resin.

Materials and Methods

Titanium and polyetheretherketone (PEEK) AMHs were separated into four surface treatment groups; no treatment, airborne-particle abrasion (APA) applied, universal bond (UB) applicated, APA, and UB applicated. Eight millimeters in diameter and ten millimeters tall straws were used to restrain the reline acrylic resin prepared according to the manufacturer's instructions and the resin was injected onto the surface-treated AMH. After the polymerization was completed, the universal testing machine performed the tensile bond strength (TBS) test with a fishing line passed through the acrylic resins.

Statistical Analysis Used

TBS data were analyzed with two and one-way ANOVA and Tukey HSD post hoc tests (α =0.05).

Results

According to the two-way ANOVA results, titanium AMHs (103.78 ± 45.98 N) showed higher TBS than PEEK AMHs (67.81 ± 28.61 N). UB applicated titanium groups showed significantly increased TBS values.

Conclusions

Using titanium AMHs may be a better choice in situations where clinical aesthetic expectations are unimportant for adhesion to reline acrylic resins. The UB resin significantly increased the bonding of the titanium AMHs with reline resins. The application of UB resin to titanium housings can be easily applied in a clinical situation and can reduce the detachment of the titanium AMHs.

Amphibious Nastic Hydrogel Based on the Tropic Movement of Gelatin and Its Opposite Phase Transition to PNIPAm

Mimicking the anisotropic structure and environmental adaptation of organisms in nature remains a key objective in the field of hydrogels. However, it has been very challenging due to complex fabrication and confined application only in water. Here, we demonstrate a new strategy of spontaneous fabrication of an anisotropic hydrogel based on our finding in the tropic movement of gelatin toward the Teflon template. The obtained hydrogel exhibits fast response and recovery under temperature stimuli both in aqueous and non-aqueous environments, making use of the approximate transition temperature and opposite phase transition behavior of gelatin and poly(N-isopropylacrylamide) (PNIPAm). Its recovery performance in water is more than 50 times faster than that of the PNIPAm hydrogel. Furthermore, the PNIPAm/gelatin hydrogel can achieve 3D complex deformations, stealth deformation, erasable and reprogrammed surface patterning, and multistage encryption by simply modulating the location and shape of gelatin to achieve an anisotropic structure. The work provides a simple and versatile way to obtain an anisotropic hydrogel with a definite and predictable structure, which is demonstrated across a range of different monomers. It improves the responsive performance and broadens the hydrogel application to the non-aqueous environment. Additionally, this tropic movement of gelatin can be extended for the design of new types of anisotropic materials and thus endows the materials with diverse functionality.

The Synergistic Effects between Sulfobetaine and Hydrophobically Modified Polyacrylamide on Properties Related to Enhanced Oil Recovery

In order to explore the mechanism responsible for the interactions in the surfactant-polymer composite flooding and broaden the application range of the binary system in heterogeneous oil reservoirs, in this paper, the influences of different surfactants on the viscosity of two polymers with similar molecular weights, partially hydrolyzed polyacrylamide (HPAM) and hydrophobically modified polyacrylamide (HMPAM), were studied at different reservoir environments. In addition, the relationship between the surfactant-polymer synergistic effects and oil displacement efficiency was also investigated. The experimental results show that for HPAM, surfactants mainly act as an electrolyte to reduce its viscosity. For HMPAM, SDBS and TX-100 will form aggregates with the hydrophobic blocks of polymer molecules, reducing the bulk viscosity. However, zwitterionic surfactant aralkyl substituted alkyl sulfobetaine BSB molecules can build "bridges" between different polymer molecules through hydrogen bonding and electrostatic interaction. After forming aggregates with HMPAM molecules, the viscosity will increase. The presence of two polymers all weakened the surfactant oil-water interfacial membrane strength to a certain extent, but had little effect on the interfacial tension. The synergistic effect of the "bridge" between HMPAM and BSB under macroscopic conditions also occurs in the microscopic pores of the core, which has a beneficial effect on improving oil recovery.

Effects of Different Surface Treatments of Woven Glass Fibers on Mechanical Properties of an Acrylic Denture Base Material

Silanized glass fibers are popular reinforcements of acrylic denture base materials. To increase the number of surface hydroxyl groups and to improve interfacial adhesion between the matrix and reinforcements, acid or base treatments of glass fibers are commonly performed before the silanization. However, limited data are available on the effect of these treatments on the mechanical properties of acrylic matrix composite materials used for denture base applications. In this work, before the silanization of a woven glass fiber fabric (GF) with 3-(trimethoxysilyl) propyl methacrylate, activation pretreatments using HCl and NH₄OH aqueous solutions have been performed. To characterize the glass surface, FTIR spectroscopy was used. Specimens of cured acrylic denture base resin and composites were divided into five groups: (1) cured acrylic denture base resin-control group; (2) composite with non-silanized GF; (3) composite with silanized GF; (4) composite with NH₄OH activated and silanized GF; (5) composite with HCl activated and silanized GF. The flexural and impact properties of specimens were evaluated by means of three-point-bending tests and Charpy impact testing, respectively. The residual reactivity of the samples was analyzed using differential scanning calorimetry. The results of mechanical testing showed that acid and base pretreatments of the glass fabric had a positive effect on the flexural modulus of prepared composites but a negative effect on their impact strength. Possible interfacial adhesion mechanisms and the diffusion control of isothermal cure reactions due to vitrification have been discussed.

Effect of microwave polymerization on the thermomechanical and surface properties of ocular prosthetic acrylic resins

BACKGROUND

Polymerization conditions affect the physical-mechanical properties of acrylic resins used for craniofacial prostheses.

OBJECTIVE

The aim of this study was to evaluate the effect of microwave polymerization on the thermomechanical properties and surface morphology of ocular prostheses fabricated with polymethyl methacrylate (PMMA).

METHODS

PMMA discs were polymerized with microwave energy and with conventional heat polymerization (CHP) method. Ocular prostheses were fabricated to determine whether there were changes according to the polymerization method. The surface morphology and roughness were observed under SEM and AFM. The Vickers Hardness number (VHN) and flexural strength were measured. Thermal properties were evaluated with TGA/DSC, and chemical composition with FTIR.

RESULTS

The PMMA acrylic resin polymerized with microwave energy showed a smooth surface with some relief areas. In the internal surface of the ocular prosthesis with microwave energy the PMMA is more compact. The mean roughness values were higher and statistically significant with CHP (P < 0.05), while the surface hardness and flexural strength were higher with microwave energy (P < 0.05).

CONCLUSION

There were no changes in the calorimetry with either method, TGA showed an exothermic peak around 120 °C with CHP method. PMMA polymerized with microwave energy improved the mechanical and surface properties of the ocular prostheses.

Comparison of strength of milled and conventionally processed PMMA complete-arch implant-supported immediate interim fixed dental prostheses

STATEMENT OF PROBLEM

A typical conversion process of a complete-arch immediate loading protocol entails preparing holes in a complete denture for connection to interim copings, which reduces the strength of the prosthesis. The excellent mechanical properties of milled polymethyl methacrylate (PMMA) disks may provide interim prostheses with improved strength.

PURPOSE

The purpose of this in vitro study was to measure the flexural strength and failure load of simulated acrylic resin immediate implant-supported interim prostheses fabricated by conventional processing and computer-aided manufacturing.

MATERIAL AND METHODS

A master patient model was created with an acrylic resin base and 2 BioHorizons Internal 4.5-mm-diameter implants placed with a 21.5-mm span and multiunit abutments (MUA) tightened to place. Two groups with different prosthodontic designs were used: one represented the standard fixed prosthesis with support at each end (noncantilever, NC), and the other group represented the cantilever portion of the prosthesis (cantilever, C). Two connection designs of prosthesis blocks to MUA abutments were evaluated: one with typical holes in the prosthesis for capturing interim copings and one with a low-profile coping. For the heat-processed PMMA groups (HP/NC and HP/C), wax patterns were milled, and heat-polymerized denture base PMMA prostheses were processed. The milled PMMA groups (M/NC and M/C) were milled from a tooth-shaded PMMA disk for the prosthesis blocks. The milled low-profile groups (Mlp/NC and Mlp/C) had identical dimensions except that connection to the low-profile coping was designed with a cement space and a narrow diameter screw access hole and was milled from a PMMA disk. The failure load (N) of the cantilever prostheses was recorded, and for NC groups, the 3-point flexural strength formula (MPa) was calculated. The Weibull modulus, characteristic strength, and summary statistics were computed, and the groups were statistically analyzed with ANOVA and the post hoc Tukey test (α=.05).

RESULTS

The mean flexural strengths (MPa) were HP/NC=91.35 ±18.92; M/NC=143.94 ±36.79; Mlp/NC=117.06 ±13.86. Significant differences were found among groups (P<.001). Mean failure loads (N) and Weibull modulus (WM) of cantilever prosthesis strengths were for HP/C=512.66, WM=5.597; M/C=695.06, WM=4.875; Mlp/C=254.97, WM=1.797 (P<.001).

CONCLUSIONS

Implant fixed interim structures milled from high-density PMMA blanks had a 35% higher flexural strength for both the standard prostheses and the cantilever prostheses than heat-processed denture base PMMA. The low-profile coping design was stronger than the heat-processed material, and the failure point was relocated from the lateral walls to the cervical margin area.

Partially hydrolyzed polyacrylamide: enhanced oil recovery applications, oil-field produced water pollution, and possible solutions

Polymers, such as partially hydrolyzed polyacrylamide (HPAM), are widely used in oil fields to enhance or improve the recovery of crude oil from the reservoirs. It works by increasing the viscosity of the injected water, thus improving its mobility and oil recovery. However, during such enhanced oil recovery (EOR) operations, it also produces a huge quantity of water alongside oil. Depending on the age and the stage of the oil reserve, the oil field produces ~ 7-10 times more water than oil. Such water contains various types of toxic components, such as traces of crude oil, heavy metals, and different types of chemicals (used during EOR operations such as HPAM). Thus, a huge quantity of HPAM containing produced water generated worldwide requires proper treatment and usage. The possible toxicity of HPAM is still ambiguous, but its natural decomposition product, acrylamide, threatens humans' health and ecological environments. Therefore, the main challenge is the removal or degradation of HPAM in an environmentally safe manner from the produced water before proper disposal. Several chemical and thermal techniques are employed for the removal of HPAM, but they are not so environmentally friendly and somewhat expensive. Among different types of treatments, biodegradation with the aid of individual or mixed microbes (as biofilms) is touted to be an efficient and environmentally friendly way to solve the problem without harmful side effects. Many researchers have explored and reported the potential of such bioremediation technology with a variable removal efficiency of HPAM from the oil field produced water, both in lab scale and field scale studies. The current review is in line with United Nations Sustainability Goals, related to water security-UNSDG 6. It highlights the scale of such HPAM-based EOR applications, the challenge of produced water treatment, current possible solutions, and future possibilities to reuse such treated water sources for other applications.

Impact of type of bonding agent on adhesion of CAD-CAM denture bases and teeth manufactured using different techniques: A preliminary study

PURPOSE

To evaluate two agents for bonding denture bases and teeth manufactured either by stereolithography (SLA) or by the subtractive mixed technique.

METHODS

Two types of cylinders [small for the tooth resin and large for the base resin) were designed using CAD software according to the ANSI/ADA 15-2008 (R2013)] specification. For SLA manufacturing, 30 small cylinders were shaped with Denture Teeth resin and 30 large cylinders with Denture Base resin. For the mixed technique, 30 large cylinders were manufactured by SLA with V-print dentbase resin, and 30 small cylinders were milled with a CediTEC DT disk. Half the specimens were bonded with liquid Denture Base resin and half with CediTEC Primer and Adhesive, according to the manufacturers' protocols. Shear bond strength was measured using a universal testing machine. The failure mode was noted for all the specimens.

RESULTS

The shear bond strength values were not significantly different between the groups (P> 0.05). Specimens bonded with liquid Denture Base resin displayed cohesive failure (P> 0.05, ײ= 0). Of the specimens bonded with CediTEC Primer and Adhesive, cohesive failures were observed with five specimens manufactured with the SLA technique and one specimen manufactured with the mixed technique (P> 0.05, ײ= 3.33). The Chi-square test results were significant between groups with different bonding agents regardless of the technique used (P< 0.001). Within the limitations of the present study, even if the shear bond strength values were similar, the failure mode analysis suggests that the uncured liquid Denture Base resin may be more effective than the CediTEC Primer and Adhesive for bonding denture bases and teeth manufactured either by SLA or the mixed technique.

CLINICAL SIGNIFICANCE

The present study suggests that the uncured liquid resin (Denture Base) used as a bonding agent and the denture base and tooth materials (V-Print and CediTEC DT) manufactured by SLA and the subtractive technique are clinically compatible.

Electron Microscopy of Cells Grown on Polyacrylamide Hydrogels

The composition of the cell culture environment profoundly affects cultured cells. Standard cell culture equipment such as plastic and glass provide extremely stiff surfaces compared to physiological cell environments (i.e., tissue). A growing body of evidence documents the artificial behavior and morphology of cells cultured on supraphysiologically stiff surfaces, such as glass (elastic modulus ca. 70,000 MPA) or plastic (e.g., polystyrol ca. 3300 MPA). Therefore, polymer-based hydrogels are increasingly employed as more physiologically appropriate (<100 kPA) supports for 2D or 3D culture. Since multiple properties that influence the cultured cells may be easily adjusted, hydrogels have become versatile tools for studying cells in a more native in vitro environment. Polyacrylamide-based hydrogels can be used as culture substrates for a broad variety of adherent cells and are easy to handle in most downstream biological assays, such as immunohistochemistry or molecular biology methods. We faced, however, serious difficulties with processing high stiffness polyacrylamide-based hydrogels for electron microscopy. To overcome this problem, we developed a simple protocol for embedding and processing cells grown on high stiffness polyacrylamide hydrogels that do not require modifications of routine embedding protocols. © 2022 The Authors. Current Protocols published by Wiley Periodicals LLC. Basic Protocol: Embedding of polyacrylamide-based hydrogels for transmission electron microscopy Alternate Protocol 1: Procedure for detached hydrogels Alternate Protocol 2: Procedure for attached hydrogels.

Engineering of Stable Cross-Linked Multilayers Based on Thermo-Responsive PNIPAM-Grafted-Chitosan/Heparin to Tailor Their Physiochemical Properties and Biocompatibility

The thermo-responsive poly(N-isopropylacrylamide) (PNIPAM) is ubiquitously applied in controlled drug release and tissue engineering. However, the lack of bioactivity of PNIPAM restricts its use in cell-containing systems being a thermo-responsive adhesive substratum with no regulating effect on cell growth and differentiation. In this study, integrating PNIPAM with chitosan into PNIPAM-grafted-chitosan (PNIPAM-Chi) allows a layer-by-layer assembly with bioactive heparin to fabricate PNIPAM-modified polyelectrolyte multilayers (PNIPAM-PEMs). Grafting PNIPAM chains of either 2 (LMW) or 10 kDa (HMW) on the chitosan backbone influences the cloud point (CP) temperature in the range from 31 to 33 °C. PNIPAM-Chi with either a higher molecular weight or a higher degree of substitution of PNIPAM chains exhibiting a significant increase in diameter above CP as ensured by dynamic light scattering is selected to fabricate PEM with heparin as a polyanion at pH 4. Little difference of layer growth is detected between the chosen PNIPAM-Chi used as polycations by surface plasmon resonance, while multilayers formed with HMW-0.02 are more hydrated and show striking swelling-and-shrinking abilities when studied with quartz crystal microbalance with dissipation monitoring. Subsequently, the multilayers are covalently cross-linked using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide to strengthen the stability of the systems under physiological conditions. Ellipsometry results confirm the layer integrity after exposure to the physiological buffer at pH 7.4 compared to those without cross-linking. Moreover, significantly higher adhesion and more spreading of C3H10T1/2 multipotent embryonic mouse fibroblasts on cross-linked PEMs, particularly with heparin terminal layers, are observed owing to the bioactivity of heparin. The slightly more hydrophobic surfaces of cross-linked PNIPAM-PEMs at 37 °C also increase cell attachment and growth. Thus, layer-by-layer constructed PNIPAM-PEM with cross-linking represents an interesting cell culture system that can be potentially employed for thermally uploading and controlled release of growth factors that further promotes tissue regeneration.

Tunable two-step shape and dimensional changes with temperature of a PNIPAM/CNC hydrogel

PNIPAM (poly(N-isopropylacrylamide)), a well-studied thermo-responsive polymer, undergoes conformational transition around 32 °C. On the other hand, cellulose nanocrystals (CNCs), as a promising and biocompatible material, has rarely been introduced to the PNIPAM-based fibrous hydrogel system. CNCs' impact on the temperature responsive behaviors of hydrogels, either in single layer or bilayer hydrogel systems, is yet to be investigated. In this work, stable well dispersed PNIPAM/CNC suspensions (with various CNC proportions) are prepared and electrospun into nanofiber membranes. The corresponding hydrogels are then obtained via UV-induced crosslinking. CNCs are found to exert a significant constraint effect on hydrogel swelling when it exceeded 5 wt% but a negligible effect on contraction. The difference between hydrogels with various CNC proportions regarding their temperature responsive behaviors is utilized to fabricate bilayer hydrogels. These bilayer samples are capable of generating 3D geometries when they come into contact with water for the first time via anisotropic swelling between the two layers and changing their dimension reversibly in the following swelling and contraction. In addition, these geometries are found to be highly tunable via the finely tuned thickness ratio between the two layers. This promising feature would significantly extend the application of these materials in tissue engineering where a controllable geometry of the culture substrate is of great importance.

Validation and scalability of homemade polycaprolactone macro-beads grafted with thermo-responsive poly (N-isopropyl acrylamide) for mesenchymal stem cell expansion and harvesting

In this study, polycaprolactone (PCL) macro-beads were prepared by an oil-in-water (o/w) emulsion solvent evaporation method with poly (vinyl alcohol) (PVA) as an emulsifier and conjugated to poly (N-isopropyl acrylamide) (PNIPAAm) to be used as cell carriers with non-invasive cell detachment properties (thermo-response). Following previous studies with PCL-PNIPAAm carriers, our objectives were to confirm the successful conjugation on homemade macro-beads and to show the advantages of homemade production over commercial beads to control morphological, biological and fluidization properties. The effects of PCL concentration on the droplet formation and of flow rate and PVA concentration on the size of the beads were demonstrated. The size of the beads, all spherical, ranged from 0.5 mm to 3.7 mm with four bead categories based on production parameters. The morphology and size of the beads were observed by scanning electron microscopy to show surface roughness enhancing cell attachment and proliferation compared to commercial beads. The functionalization steps with PNIPAAm were then characterized and confirmed by Fourier transform infrared spectroscopy (FTIR), SEM and Energy Dispersion Spectroscopy (EDS). PNIPAAm-grafted macro-beads allowed mesenchymal stem cells (MSC) to spread and grow for up to 21 days. By reducing the temperature to 25 °C, the MSCs were successfully detached from the PCL-PNIPAAm beads as observed with fluorescence microscopy. Furthermore, we validated the scalability potential of both macro-beads production and conjugation with PCL, in order to produce easily kilograms of thermo-responsive macro-carriers in a lab environment. This could help moving such approaches towards clinically and industrially relevant processes were cell expansion is needed at very large scale. This article is protected by copyright. All rights reserved.

High-quality Chlorella vulgaris biomass harvesting through chitosan and polyacrylamid2e

Microalgal biomass is an emerging source of renewable energy and health-related compounds. However, harvesting of microalgae is a techno-economic hinder. In this research, chitosan and polyacrylamide were optimized harvesting condition for Chlorella vulgaris. Stirring at 300 rpm for 2 min is optimum for chitosan and polyacrylamide. Low-dose (10 mg/L) chitosan (flocculation efficiency (FE), 98.10 ± 1.06%) is more efficient than high-dose (25 mg/L) polyacrylamide (FE 94.57 ± 0.55%) for harvesting C. vulgaris. Chitosan resulted flocs settled more quickly than polyacrylamide, while polyacrylamide keep > 90% FE in a wider pH range (7-10) than chitosan (7-8). Chitosan and polyacrylamide both have no negative effect on biomass composition, including protein, carbohydrate, and carotenoid. C. vulgaris in flocs could successfully regrow in fresh culture media. The residual culture media was recycled with little impact on cell growth. All the results suggested that chitosan and polyacrylamide could harvest high-quality microalgal biomass.

Cationic polyacrylamide (CPAM) enhanced pressurized vertical electro-osmotic dewatering of activated sludge

Pressurized vertical electro-osmotic dewatering (PVEOD) has been regarded as a feasible method to achieve sludge deep-dewatering, but the dewatering efficiency is still challenged by high electric resistance. This study employed cationic polyacrylamide (CPAM) as a skeleton builder to enhance electro-osmotic flow in PVEOD. The sludge dewatering efficiency and synergistic effect of CPAM and PVEOD were elucidated. The sludge morphology, surface property, extracellular polymeric substances (EPS) destruction and migration, spatial distributions of proteins and polysaccharides, and current changes were investigated. After the addition of optimal CPAM dose, the sludge formed a uniform and porous structure that provided water channels and enhanced electric transport, thus promoting EPS destruction. The sludge moisture content (MC) analysis indicated the more liberation of bound water due to EPS destruction. Besides, the re-flocculation of disintegrated sludge flocs improved the sludge filtration and thus dewaterability. Instantaneous energy consumption (E_t,0.5) was optimized and two-step synergistic mechanism was thus proposed. These findings indicated that the combination of CPAM and PVEOD is a promising strategy to broaden the scope of industrial application of sludge deep-dewatering.

Swelling and glyphosate-controlled release behavior of multi-responsive alginate-g-P(NIPAm-co-NDEAm)-based hydrogel

Intelligent controlled release systems (ICRS) displayed great achievement in agriculture by enhancing the utilization efficiency of agrochemicals. In this work, an intelligent graft copolymer (Alg-g-P(NIPAm-co-NDEAm)) with alginate (Alg) backbone and thermo-responsive poly(N-isopropyl acrylamide-co-N,N-diethylacrylamide) (P(NIPAm-co-NDEAm)) side chain was constructed as the matrix of ICRS through redox copolymerization, and its thermo-induced responsive property was studied. Then, the copolymer was mixed with a promising photothermal material semi-coke (SC) to form hydrogel beads (Ca-Alg-g-P(NIPAm-co-NDEAm)/SC) by ion crosslinking. The water absorbency of beads under different stimuli (pH, temperature, and light) presented outstanding responsive performance and the swelling mechanism was analyzed through coupling theory. Furthermore, the release of glyphosate (Gly) from Ca-Alg-g-P(NIPAm-co-NDEAm)/SC under environmental stimuli displayed regulatable behaviors. This multi-responsive hydrogel bead shows bright prospect in the sustainable advancement of crop production.

Removal of Acidic Organic Ionic Dyes from Water by Electrospinning a Polyacrylonitrile Composite MIL101(Fe)-NH2 Nanofiber Membrane

A nanofiber metal–organic framework filter, a polyacrylonitrile (PAN) nanofiber membrane composite with an iron/2-amino-terephthalic acid-based metal–organic framework (MIL101(Fe)-NH₂), was prepared by one-step electrospinning. MIL101(Fe)-NH₂ was combined into the polymer nanofibers in situ. PAN-MIL101(Fe)-NH₂ composite nanofiber membranes (NFMs) were prepared from a homogeneous spinning stock containing MIL101(Fe)-NH₂ prebody fluid and PAN. Crystallization of MIL101(Fe)-NH₂ and solidification of the polymer occurred simultaneously during electrospinning. The PAN-MIL101(Fe)-NH₂ composite NFM showed that MIL101(Fe)-NH₂ was uniformly distributed throughout the nanofiber and was used to adsorb and separate acidic organic ionic dyes from the aqueous solution. The results of Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction analysis showed that MIL101(Fe)-NH₂ crystals were effectively bonded in the PAN nanofiber matrix, and the crystallinity of MIL101(Fe)-NH₂ crystals remained good, while the distribution was uniform. Owing to the synergistic effect of PAN and the MIL101(Fe)-NH₂ crystal, the PAN-MIL101(Fe)-NH₂ composite NFM showed a fast adsorption rate for acidic ionic dyes. This study provides a reference for the rapid separation and purification of organic ionic dyes from wastewater.

Demonstrating the Interfacial Polymer Thermal Transition from Coil-to-Globule to Coil-to-Stretch under Shear Flow Using SFG and MD Simulation

Revealing interfacial shear-induced structural responsiveness has long been an important topic in that most fluids in nature and human life are in motion and cause interesting boundary phenomena. It is amazing how the polymer chain conformation or local structural features at a boundary change under the effective shear condition. In this study, microfluidic-assisted sum frequency generation (SFG) vibrational spectroscopy and all-atom molecular dynamics (MD) simulation are combined to reveal that the shear flow can effectively block the so-called thermal coil-to-globule transition of the poly(N-isopropylacrylamide) (PNIPAM) brushes on the solid substrate, and the normal coil-to-globule transition transfers to a coil-to-stretch one under shear flow with increasing ambient temperature. Such findings are attributed to the balance between the shear flow and the molecular interaction with respect to the polymer chains and adjacent water molecules, thus demonstrating the significant effect of the shear flow on the structural and dynamic behaviors of the polymer chains at the boundaries from the molecular level.

A pulp foam with highly improved physical strength, fire-resistance and antibiosis by incorporation of chitosan and CPAM

Bio-inspired borate cross-linked pulp foam (PF) with high porosity and low density can be widely used in many fields. However, PF is flammable, and lack of mechanical strength and antibacterial activity. To solve these issues, an ultra-strong PF was prepared by incorporation of chitosan and cationic polyacrylamide (CPAM). Results showed that the obtained PF exhibited highly improved mechanical properties (the compressive strength (485 kPa at a strain of 50%) was over 6 times higher compared with the borate cross-linked PF without chitosan and CPAM, and it was even higher than most of the reported cellulose-based porous materials). Also, the prepared PF has good performance on fire-retardance (hard to light), thermal insulation, antibiosis and sound absorption, due to the synergistic actions of borate, chitosan and CPAM. Additionally, spent liquor in preparing PF could be fully recycled, and thus this sustainable approach has potential for large-scale production of high-performance PF.

Electrotransfer of Immunoprobes through Thin-Layer Polyacrylamide Gels

Hydrogels are important structural and operative components of microfluidic systems, finding diverse utility in biological sample preparation and interrogation. One inherent challenge for integrating hydrogels into microfluidic tools is thermodynamic molecular partitioning, which reduces the in-gel concentration of molecular solutes (e.g., biomolecular regents), as compared to the solute concentration in an applied solution. Consequently, biomolecular reagent access to in-gel scaffolded biological samples (e.g., encapsulated cells, microbial cultures, target analytes) is adversely impacted in hydrogels. Further, biomolecular reagents are typically introduced to the hydrogel via diffusion. This passive process requires long incubation periods compared to active biomolecular delivery techniques. Electrotransfer is an active technique used in Western blots and other gel-based immunoassays that overcomes limitations of size exclusion (increasing the total probe mass delivered into gel) and expedites probe delivery, even in millimeter-thick slab gels. While compatible with conventional slab gels, electrotransfer has not been adapted to thin gels (50-250 μm thick), which are of great interest as components of open microfluidic devices (vs enclosed microchannel-based devices). Mechanically delicate, thin gels are often mounted on rigid support substrates (glass, plastic) that are electrically insulating. Consequently, to adapt electrotransfer to thin-gel devices, we replace rigid insulating support substrates with novel, mechanically robust, yet electrically conductive nanoporous membranes. We describe grafting nanoporous membranes to thin-polyacrylamide-gel layers via silanization, characterize the electrical conductivity of silane-treated nanoporous membranes, and report the dependence of in-gel immunoprobe concentration on transfer duration for passive diffusion and active electrotransfer. Alternative microdevice component layers─including the mechanically robust, electrically conductive nanoporous membranes reported here─provide new functionality for integration into an increasing array of open microfluidic systems.

Collagen Fibril-Assembled Skin-Simulated Membrane for Continuous Molecular Separation

A skin-simulated thin-film-composite membrane was fabricated using a vacuum-assisted interfacial polymerization method. A negatively charged surface-selective layer on a polyacrylonitrile (PAN) substrate was cross-linked using trimesoyl chloride to form polyamide and polyester with a three-layer structure that was similar to skin. The loading of collagen fibrils assembled on the membrane surface was varied, and a selective layer was obtained, of which the thickness, morphology, and hydrophilicity can be manipulated. The optimal membrane decorated with 0.5 mg of collagen fibril had a selective layer thickness of around 130 nm with pure water permeability up to 84.7 LMH bar^-1. Furthermore, the membrane exhibited impressive rejections toward dyes (Congo red with a molecular weight of 696.68 Da: 99.6%, reactive blue 19 with a molecular weight of 626.54 Da: 99.8%, and Coomassie blueG-250 with a molecular weight of 854.02 Da: 98.6%) while high permeations of Na₂SO₄ and NaCl were achieved. This facile strategy provides a useful guideline for constructing bionic membranes through biomaterials.

Photonic Hydrogels for Synergistic Visual Bacterial Detection and On-Site Photothermal Disinfection

Rapid and sensitive diagnostics in the early stage of bacterial infection and immediate treatment play critical roles in the control of infectious diseases. However, it remains challenging to develop integrated systems with both rapid detection of bacterial infection and timely on-demand disinfection ability. Herein, we demonstrate a photonic hydrogel platform integrating visual diagnosis and on-site photothermal disinfection by incorporating Fe₃O₄@C nanoparticles into a poly(hydroxyethyl methacrylate)-co-polyacrylamide (PHEMA-co-PAAm) matrix. In vitro experiments demonstrate that such a hydrogel can respond to pH variation caused by bacterial metabolism and generate the corresponding color changes to realize naked-eye observation. Meanwhile, its excellent photothermal conversion ability enables it to effectively kill bacteria by destroying cell membranes under near-infrared irradiation. Moreover, the pigskin infection wound model also verifies the bacterial detection performance and disinfection ability of the hydrogel in vivo. Our strategy demonstrates a new approach for visual diagnosis and treatment of bacterial infections.

Surface Force Measurements of Mussel-Inspired Pressure-Sensitive Adhesives

Translating fundamental studies of marine mussel adhesion into practical mussel-inspired wet adhesives remains an important technological challenge. To adhere, mussels secrete adhesive proteins rich in the catecholic amino acid 3,4-dihydroxyphenylalanine (Dopa) and positively charged lysine. Consequently, numerous synthetic adhesives incorporating catecholic and cationic functionalities have been designed. However, despite widespread research, uncertainties remain about the optimal design of synthetic mussel-inspired adhesives. Here, we present a study of the adhesion of mussel-inspired pressure-sensitive adhesives. We explore the effects of catechol content, molecular architecture, and solvent quality on pressure-sensitive adhesive (PSA) adhesion and cohesion measured in a surface forces apparatus. Our findings demonstrate that the influence of catechol content depends on the choice of solvent and that adhesive performance is dictated by film composition rather than molecular architecture. Our results also highlight the importance of electrostatic and hydrophobic interactions for adhesion and cohesion in aqueous environments. Together, our findings contribute to an improved understanding of the interplay between materials chemistry, environmental conditions, and adhesive performance to facilitate the design of bioinspired wet adhesives.

Effect of Triazine Comonomer Substitution on the Structure and Glass Transition Temperature of Monomethacrylate-based Resin Polymer: An In Vitro Study

AIM AND OBJECTIVES

The present research aimed to characterize and deduce the structure of a novel denture base copolymer containing antimicrobial triazine comonomer by nuclear magnetic resonance (NMR) and energy-dispersive X-ray (EDX) spectroscopies. Also, it aimed to evaluate the glass transition temperature (Tg) with the addition of TATA at different concentrations.

MATERIALS AND METHODS

The trial groups G10 and G20 were thermo-polymerized with triazine comonomer, whereas the control group G0 was polymerized without the triazine. NMR and EDX spectroscopies assessed copolymerization along with deducing elemental composition in 
mass %. The surface topographies were observed through field-emission scanning electron microscopy (FESEM). The Tg of the resultant copolymer was examined by differential scanning calorimetry. Pertinent statistical tests with relevant multiple comparison tests were exercised to compare the mean Tg of the groups.

RESULTS

The configuration of a new copolymer containing triazine comonomer was manifested with additional protons and carbon atoms. Nitrogen was detected in the EDX spectroscopy of the trial groups. The Tg of the new copolymer was higher than the G0. The triazine comonomer in the copolymer at 20% concentration exhibited the highest Tg.

CONCLUSION

The triazine comonomer substitution produced a novel denture base copolymer with enhanced Tg.

CLINICAL SIGNIFICANCE

The novel denture base copolymer may possess enhanced biomechanical properties due to the TATA's cross-linking capability. Nevertheless, the antimicrobial property of the triazine comonomer incorporated in the denture base composition might be beneficial in inhibiting the microbial colonization on the denture's surface.

Thermoresponsive Nanostructures: From Mechano-Bactericidal Action to Bacteria Release

Overuse of antibiotics can increase the risk of notorious antibiotic resistance in bacteria, which has become a growing public health concern worldwide. Featured with the merit of mechanical rupture of bacterial cells, the bioinspired nanopillars are promising alternatives to antibiotics for combating bacterial infections while avoiding antibacterial resistance. However, the resident dead bacterial cells on nanopillars may greatly impair their bactericidal capability and ultimately impede their translational potential toward long-term applications. Here, we show that the functions of bactericidal nanopillars can be significantly broadened by developing a hybrid thermoresponsive polymer@nanopillar-structured surface, which retains all of the attributes of pristine nanopillars and adds one more: releasing dead bacteria. We fabricate this surface through coaxially decorating mechano-bactericidal ZnO nanopillars with thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm) brushes. Combining the benefits of ZnO nanopillars and PNIPAAm chains, the antibacterial performances can be controllably regulated between ultrarobust mechano-bactericidal action (∼99%) and remarkable bacteria-releasing efficiency (∼98%). Notably, both the mechanical sterilization against the live bacteria and the controllable release for the pinned dead bacteria solely stem from physical actions, stimulating the exploration of intelligent structure-based bactericidal surfaces with persistent antibacterial properties without the risk of triggering drug resistance.

Chemical and Mechanical Characterization of Licorice Root and Palm Leaf Waste Incorporated into Poly(urethane-acrylate) (PUA)

A poly(urethane-acrylate) polymer (PUA) was synthesized, and a sufficiently high molecular weight starting from urethane-acrylate oligomer (UAO) was obtained. PUA was then loaded with two types of powdered ligno-cellulosic waste, namely from licorice root and palm leaf, in amounts of 1, 5 and 10%, and the obtained composites were chemically and mechanically characterized. FTIR analysis of final PUA synthesized used for the composite production confirmed the new bonds formed during the polymerization process. The degradation temperatures of the two types of waste used were in line with what observed in most common natural fibers with an onset at 270 °C for licorice waste, and at 290 °C for palm leaf one. The former was more abundant in cellulose (44% vs. 12% lignin), whilst the latter was richer in lignin (30% vs. 26% cellulose). In the composites, only a limited reduction of degradation temperature was observed for palm leaf waste addition and some dispersion issues are observed for licorice root, leading to fluctuating results. Tensile performance of the composites indicates some reduction with respect to the pure polymer in terms of tensile strength, though stabilizing between data with 5 and 10% filler. In contrast, Shore A hardness of both composites slightly increases with higher filler content, while in stiffness-driven applications licorice-based composites showed potential due to an increase up to 50% compared to neat PUA. In general terms, the fracture surfaces tend to become rougher with filler introduction, which indicates the need for optimizing interfacial adhesion.

Preparation and Characterization of Semi-IPN Cryogels Based on Polyacrylamide and Poly(N,N-dimethylaminoethyl methacrylate); Functionalization of Carrier with Monochlorotriazinyl-β-cyclodextrin and Release Kinetics of Curcumin

Curcumin (CCM) is a natural hydrophobic polyphenol known for its numerous applications in the food industry as a colorant or jelly stabilizer, and in the pharmaceutical industry due to its anti-inflammatory, antibacterial, antioxidant, anti-cancer, and anti-Alzheimer properties. However, the large application of CCM is limited by its poor solubility in water and low stability. To enhance the bioavailability of CCM, and to protect it against the external degradation agents, a novel strategy, which consists in the preparation of semi-interpenetrating polymer networks, (s-IPNs) based on poly(N,N-dimethylaminoethyl methacrylate) entrapped in poly(acrylamide) networks, by a cryogelation technique, was developed in this work. All s-IPN cryogels were characterized by SEM, EDX, FTIR, and swelling at equilibrium as a function of pH. Functionalization of semi-IPN cryogel with monochlorotriazinyl-β-cyclodextrin (MCT-β-CD) led to IPN cryogel. The release profile of CCM from the composite cryogels was investigated at 37 °C, in pH 3. It was found that the cumulative release increased with the increase of the carrier hydrophobicity, as a result of increasing the cross-linking degree, the content and the molar mass of PDMAEMA. Fitting Higuchi, Korsmeyer–Peppas, and first order kinetic models on the CCM release profiles indicated the diffusion as the main driving force of drug release from the composite cryogels.