Application of flash nanoprecipitation to fabricate poorly water-soluble drug nanoparticles

Tuning Morphologies and Reactivities of Hybrid Organic-Inorganic Nanoparticles

Hybrid nanoparticles (hNPs), or nanoparticles composed of both organic and inorganic components, hold promise for diverse energy and environmental applications due to their ability to stabilize reactive nanomaterials against aggregation, enhancing their ability to pervade tortuous spaces and travel long distances to degrade contaminants in situ. Past studies have investigated the use of polymer or surfactant coatings to stabilize nanomaterials against aggregation. However, fabrication of these materials often requires multiple steps and lacks specificity in the control of their morphologies and reactivities. Here, we demonstrated a method of producing stable hNPs with tunable morphologies by incubating polystyrene nanoparticles formed via Flash NanoPrecipitation with citrate-stabilized gold nanocatalysts. Using this simple fabrication technique, we found that gold adsorption to polystyrene nanoparticles was enabled by the presence of a good solvent for polystyrene. Furthermore, changing process parameters, such as gold incubation time, and molecular parameters, such as polymer molecular weight and end-group functionality, provided control over the resultant nanocatalyst loading and dispersal atop hNPs. We classified these morphologies into three distinct regimes─aggregated, dispersed, or internalized─and we showed that the emergence of these regimes has key implications for controlling reaction rates in applications such as heterogeneous catalysis or groundwater remediation. Specifically, we found that hNPs with gold nanocatalysts embedded below the surfaces of polystyrene nanoparticles exhibited slower bulk catalytic reduction capacity than their disperse, surface-decorated counterparts. Taken together, our work demonstrates a simple way by which hNPs can be fabricated and presents a method to control catalytic reactions using reactive nanomaterials.

Fabrication Mechanisms of Lignin Nanoparticles and Their Ultraviolet Protection Ability in PVA Composite Film

Lignin is an indispensable and essential compound present in plants. It is a renewable resource and a green alternative to traditional petroleum energy. The rational utilization of lignin can reduce the environmental damage caused by traditional industrial development. The preparation of lignin nanoparticles (LNPs) using the self-assembly method is one of the most favorable ways to achieve high value-added utilization of lignin. However, the process requires an in-depth understanding of the sphere-forming mechanism of lignin self-assembly and the interaction of self-assembly forces. We used the same raw materials and two different preparation methods to prepare LNPs. The results revealed that the variation in the order of the dropwise addition of lignin solution and deionized water produced LNPs with varying average sizes. The sphere-forming mechanisms of the two kinds of lignin nanoparticles were discussed for the preparation of UV-resistant polyvinyl alcohol (PVA) polymeric films. During lignin spherification, the faster the solution reaches the supersaturation state, the faster the spherogenesis rate is, the smaller the size is, and the narrower the particle size distribution is. The lignin micro/nanospheres are produced by exploiting the π-π bonding interactions in lignin itself. The lignin micro/nanospheres are then mixed with PVA to form a film to obtain a lignin-PVA composite film material with an anti-UV effect.

Development and analysis of machine-learning guided flash nanoprecipitation (FNP) for continuous chitosan nanoparticles production

Chitosan-based nanoparticles (CNPs) are widely used in drug delivery, cosmetics formulation and food applications. To accelerate the manufacturing of CNPs, the present study develops a workflow to prepare CNPs in continues model. Based on machine learning, the workflow precisely predicts size and polymer dispersity index (PDI) value of CNPs, which impacts on the colloidal stability and applications. Multi-inlet vortex mixer (MIVM) device was fabricated by 3D printing as the reactor. Peristaltic pump was applied to deliver the reaction streams into the MIVM device and produce CNPs by flash nanoprecipitation (FNP) in continuous way. The developed MIVM device produces CNPs in controlled manner at higher output which is promising for upscale applications. Twelve machine learning algorithms were employed to investigate the potential relationship between the reaction independent variables and hydrodynamic characteristics of CNPs. Random Forest, Decision Tree, Extra Tree and Bagging algorithms performed better than other algorithms with the average prediction accuracy around 90 %. The current study demonstrated that supervised machine learning guided FNP using the developed MIVM device is an effective strategy for accurate and intelligent production of CNPs and other similar nanoparticles.

Enhanced Design of Gold Catalysts for Bioorthogonal Polyzymes

Bioorthogonal chemistry introduces nonbiogenic reactions that can be performed in biological systems, allowing for the localized release of therapeutic agents. Bioorthogonal catalysts can amplify uncaging reactions for the in situ generation of therapeutics. Embedding these catalysts into a polymeric nanoscaffold can protect and modulate the catalytic activity, improving the performance of the resulting bioorthogonal "polyzymes". Catalysts based on nontoxic metals such as gold(I) are particularly attractive for therapeutic applications. Herein, we optimized the structural components of a metal catalyst to develop an efficient gold(I)-based polyzyme. Tailoring the ligand structure of gold phosphine-based complexes, we improved the affinity between the metal complex and polymer scaffold, resulting in enhanced encapsulation efficiency and catalytic rate of the polyzyme. Our findings show the dependence of the overall polyzyme properties on the structural properties of the encapsulated metal complex.

Apoptosis-Sensing Xenograft Zebrafish Tumor Model for Anticancer Evaluation of Redox-Responsive Cross-Linked Pluronic Micelles

A suitable animal model for preclinical screening and evaluation in vivo could vastly increase the efficiency and success rate of nanomedicine development. Compared with rodents, the transparency of the zebrafish model offers unique advantages of real-time and high-resolution imaging of the whole body and cellular levels in vivo. In this research, we established an apoptosis-sensing xenograft zebrafish tumor model to evaluate the anti-cancer effects of redox-responsive cross-linked Pluronic polymeric micelles (CPPMs) visually and accurately. First, doxorubicin (Dox)-loaded CPPMs were fabricated and characterized with glutathione (GSH)-responsive drug release. Then, the B16F10 xenograft zebrafish tumor model was established to mimic the tumor microenvironment with angiogenesis and high GSH generation for redox-responsive tumor-targeting evaluation in vivo. The high GSH generation was first verified in the xenograft zebrafish tumor model. Compared with ordinary Pluronic polymeric micelles, Dox CPPMs had a much higher accumulation in zebrafish tumor sites. Finally, the apoptosis-sensing B16F10-C3 xenograft zebrafish tumor model was established for visual, rapid, effective, and noninvasive assessment of anti-cancer effects at the cellular level in vivo. The Dox CPPMs significantly inhibited the proliferation of cancer cells and induced apoptosis in the B16F10-C3 xenograft zebrafish tumor model. Therefore, the redox-responsive cross-linked Pluronic micelles showed effective anti-cancer therapy in the xenograft zebrafish tumor model. This xenograft zebrafish tumor model is available for rapid screening and assessment of anti-cancer effects in preclinical studies.

Mediating bio-fate of polymeric cholecalciferol nanoparticles through rational size control

Whilst 10-200 nm polymeric nanoparticles hold enormous medical potential, successful clinical translation remains scarce. There is an inadequate understanding of how these nanoparticles could be fabricated with consistent particle architecture in this size range, as well as their corresponding biological performance. We seek to fill this important knowledge gap by employing Design of Experiment (DoE) to examine critical formulation and processing parameters of cholecalciferol (VitD3)-loaded nanoparticles by flash nanoprecipitation (FNP). Based on the regression analysis of the critical processing parameters, six VitD3 nanoparticle formulations with z-average particle sizes between 40 and 150 nm were successfully developed, possessing essentially the same particle shape and zeta potential. To evaluate the effect of particle size on the in vivo performance, not only VitD3 but also its active metabolites (25-hydroxyvitamin D3 and 1,25-dihydroxyvitamin D3) were assayed in the biodistribution study. Results indicated that VitD3 nanoparticles with sizes ≤110 nm would achieve higher plasma retention. VitD3 nanoparticles with sizes of 40 nm and 150 nm were superior for lung deposition, while particle size had no major role in the brain uptake of VitD3 nanoparticles. The present study demonstrates the value of DoE for generating size-tunable nanoparticles with controlled particle properties in FNP and offers important insights into the particle size effect of nanoparticles <200 nm on their therapeutic potential.

Engineered Polymer-Supported Biorthogonal Nanocatalysts Using Flash Nanoprecipitation

Transition-metal catalysts (TMCs) effect bioorthogonal transformations that enable the generation of therapeutic agents in situ, minimizing off-target effects. The encapsulation of insoluble TMCs into polymeric nanoparticles to generate "polyzymes" has vastly expanded their applicability in biological environments by enhancing catalyst solubility and stability. However, commonly used precipitation approaches provide limited encapsulation efficiency in polyzyme fabrication and result in a low catalytic activity. Herein, we report the creation of polyzymes with increased catalyst loading and optimized turnover efficiency using flash nanoprecipitation (FNP). Polyzymes with controlled size and catalyst loading were fabricated by tuning the process conditions of FNP. The biological applicability of polyzymes was demonstrated by efficiently transforming a non-toxic prodrug into the active drug within cancer cells.

Progress in the drug encapsulation of poly(lactic-co-glycolic acid) and folate-decorated poly(ethylene glycol)-poly(lactic-co-glycolic acid) conjugates for selective cancer treatment

Poly(lactic-co-glycolic acid) (PLGA) is a US Food and Drug Administration (FDA)-approved polymer used in humans in the forms of resorbable sutures, drug carriers, and bone regeneration materials. Recently, PLGA-based conjugates have been extensively investigated for cancer, which is the second leading cause of death globally. This article presents an account of the literature on PLGA-based conjugates, focusing on their chemistries, biological activity, and functions as targeted drug carriers or sustained drug controllers for common cancers (e.g., breast, prostate, and lung cancers). The preparation and drug encapsulation of PLGA nanoparticles and folate-decorated poly(ethylene glycol)-poly(lactic-co-glycolic acid) (FA-PEG-PLGA) conjugates are discussed, along with several representative examples. Particularly, the reactions used for preparing drug-conjugated PLGA and FA-PEG-PLGA are emphasized, with the associated chemistries involved in the formation of structures and their biocompatibility with internal organs. This review provides a deeper understanding of the constituents and interactions of PLGA-conjugated materials to ensure successful conjugation in PLGA material design and the subsequent biomedical applications.

Rational Mitomycin Nanocarriers Based on Hydrophobically Functionalized Polyelectrolytes and Poly(lactide-co-glycolide)

Encapsulation of hydrophilic and amphiphilic drugs in appropriate colloidal carrier systems for sustained release is an emerging problem. In general, hydrophobic bioactive substances tend to accumulate in water-immiscible polymeric domains, and the release process is controlled by their low aqueous solubility and limited diffusion from the nanocarrier matrix. Conversely, hydrophilic/amphiphilic drugs are typically water-soluble and insoluble in numerous polymers. Therefore, a core-shell approach─nanocarriers comprising an internal core and external shell microenvironments of different properties─can be exploited for hydrophilic/amphiphilic drugs. To produce colloidally stable poly(lactic-co-glycolic) (PLGA) nanoparticles for mitomycin C (MMC) delivery and controlled release, a unique class of amphiphilic polymers─hydrophobically functionalized polyelectrolytes─were utilized as shell-forming materials, comprising both stabilization via electrostatic repulsive forces and anchoring to the core via hydrophobic interactions. Undoubtedly, the use of these polymeric building blocks for the core-shell approach contributes to the enhancement of the payload chemical stability and sustained release profiles. The studied nanoparticles were prepared via nanoprecipitation of the PLGA polymer and were dissolved in acetone as a good solvent and in an aqueous solution containing hydrophobically functionalized poly(4-styrenesulfonic-co-maleic acid) and poly(acrylic acid) of differing hydrophilic-lipophilic balance values. The type of the hydrophobically functionalized polyelectrolyte (HF-PE) was crucial for the chemical stability of the payload─derivatives of poly(acrylic acid) were found to cause very rapid degradation (hydrolysis) of MMC, in contrast to poly(4-styrenesulfonic-co-maleic acid). The present contribution allowed us to gain crucial information about novel colloidal nanocarrier systems for MMC delivery, especially in the fields of optimal HF-PE concentrations, appropriate core and shell building materials, and the colloidal and chemical stability of the system.

Design of Smart Nanomedicines for Effective Cancer Treatment

Nanomedicine is a novel field of study that involves the use of nanomaterials to address challenges and issues that are associated with conventional therapeutics for cancer treatment including, but not limited to, low bioavailability, low water-solubility, narrow therapeutic window, nonspecific distribution, and multiple side effects of the drugs. Multiple strategies have been exploited to reduce the nonspecific distribution, and thus the side effect of the active pharmaceutical ingredients (API), including active and passive targeting strategies and externally controllable release of the therapeutic cargo. Site-specific release of the drug prevents it from impacting healthy cells, thereby significantly reducing side effects. API release triggers can be either externally applied, as in ultrasound-mediated activation, or induced by the tumor. To rationally design such nanomedicines, a thorough understanding of the differences between the tumor microenvironment versus that of healthy tissues must be pared with extensive knowledge of stimuli-responsive biomaterials. Herein, we describe the characteristics that differentiate tumor tissues from normal tissues. Then, we introduce smart materials that are commonly used for the development of smart nanomedicines to be triggered by stimuli such as changes in pH, temperature, and enzymatic activity. The most recent advances and their impact on the field of cancer therapy are further discussed.

Synthesis, characterization, and evaluation of chloroaluminium phthalocyanine incorporated in poly(ε-caprolactone) nanoparticles for photodynamic therapy

BACKGROUND

The use of nanotechnology has been widely used in biomedical science, which consists of orthopedic implants, tissue engineering, cancer therapy and drug elution from nanoparticle systems, such as poly-caprolactone (PCL) nanoparticles, which stand out mainly for their biocompatibility, being considered as effective carriers for photosensitizing drugs (PS) in photodynamic therapy (PDT) protocols.

METHODS

This manuscript describes the synthesis and characterization of PCL nanoparticles for controlled release of the drug chloro-aluminum phthalocyanine (ClAlPc) as a photosensitizer for application in PDT. The PCL-ClAlPc nanoparticles were developed by the nanoprecipitation process. The structure and morphology of the nanoparticles were studied with scanning electron microscopy (SEM) and with Fourier transform infrared (FTIR). The size of nanomaterials was studied using the Dynamic Light Scattering (DLS) method. Photophysical and photochemical characterizations were performed. Subsequently, photobiological studies were also used to characterize the system.

RESULTS

The nanoparticles had an average diameter of 384.7 ± 138.6 nm and a polydispersity index of 0.153. SEM analysis revealed that the system formed a spherical shape typical of these delivery systems. Charging efficiency was 82.1% ± 1.2%. The phthalocyanine-loaded PCL nanoparticles maintained their photophysical behavior after encapsulation. Cell viability was determined after the dark toxicity test, and it was possible to observe that there was no evidence of toxicity in the dark, for all concentrations tested. The assay also revealed that adenocarcinoma cells treated with free ClAlPc and in the nanoformulation showed 100% cell death when subjected to PDT protocols. The intracellular location of the photosensitizer indicated a high potential for accumulation in the cytoplasm and nucleus.

CONCLUSIONS

From the photophysical, photochemical and photobiological analyzes obtained, it was possible to observe that the development of PCL nanoparticles encapsulated with ClAlPc, by the nanoprecipitation method was adequate and that the in vivo release study is efficient to reduce the release rate and attenuate the burst of PS loaded on PCL nanoparticles. The results reinforce that the use of this system as drug delivery systems is useful in PDT protocols.

Recent trends in praziquantel nanoformulations for helminthiasis treatment

INTRODUCTION

Infections caused by parasitic flatworms impose a considerable worldwide health burden. Recently, World Health Organization launched its roadmap for neglected diseases for the period 2021 to 2030 and oral treatment with praziquantel (PZQ) in tablet form is the main drug therapy for combating these diseases, but its use is limited by many drawbacks, including the high therapeutic dose due to the drug's low solubility and bioavailability. Among the strategies to improve PZQ performance, the use of drug nanocarriers has been cited as an interesting approach to overcome these pharmacological issues.

AREAS COVERED

This review focuses on the various types of nanomaterials (polymeric, lipidic, inorganic nanoparticles, and nanocrystals) which have been recently used to improve PZQ therapy. In addition, recent advances in PZQ nanoformulations, developed to overcome the barriers of the conventional drug are described.

EXPERT OPINION

Considering the poor rate of discovery in the anthelmintic segment observed in recent decades, the effective management of existing drugs has become essential. The application of new strategies based on nanotechnology can extend the useful life of PZQ in new and more effective formulations. Pharmaceutical nanotechnology can solve the pharmacokinetic challenges characteristic of PZQ and improve its solubility and bioavailability.

Biocompatible poly(ethylene succinate) polyester with molecular weight dependent drug release properties

In the present study, we demonstrate that well-known molecular weight-dependent solubility properties of a polymer can also be used in the field of controlled drug delivery. To prove this, poly(ethylene succinate) (PES) polyesters with polycondensation time regulated molecular weights were synthesized via catalyst-free direct polymerization in an equimolar ratio of ethylene glycol and succinic acid monomers at 185 °C. DSC and contact angle measurements revealed that increasing the molecular weight (M_w, 4.3-5.05 kDa) through the polymerization time (40-80 min) increased the thermal stability (T_m= ∼61-80 °C) and slightly the hydrophobicity (Θ_w= ∼27-41°) of the obtained aliphatic polyester. Next, this biodegradable polymer was used for the encapsulation of Ca²⁺ channel blocker Nimodipine (NIMO) to overcome the poor water solubility and enhance the bioavailability of the drug. The drug/ polymer compatibility was proved by the means of solubility (δ) and Flory-Huggins interaction (miscibility) parameters (χ). The nanoprecipitation encapsulation of NIMO into PES with increasing M_w resulted in the formation of spherical 270 ± 103 nm NIMO-loaded PES nanoparticles (NPs). Furthermore, based on the XRD measurements, the encapsulated form of NIMO-loaded PES NPs showed lower drug crystallinity, which enhanced not only the water solubility but even the water stability of the NIMO in an aqueous medium. The in-vitro drug release experiments demonstrated that the release of NIMO drug could be accelerated or even prolonged by the molecular weights of PES as well. Due to the low crystallinity of PES polyester and low particle size of the encapsulated NIMO drug led to enhance solubility and releasing process of NIMO from PES with lower M_w (4.3 kDa and 4.5 kDa) compared to pure crystalline NIMO. However, further increasing the molecular weight (5.05 kDa) was already reduced the amount of drug release that provides the prolonged therapeutic effect and enhances the bioavailability of the NIMO drug.

coupled Hydrodynamic Flow Focusing (cHFF) to Engineer Lipid–Polymer Nanoparticles (LiPoNs) for Multimodal Imaging and Theranostic Applications

An optimal design of nanocarriers is required to overcome the gap between synthetic and biological identity, improving the clinical translation of nanomedicine. A new generation of hybrid vehicles based on lipid–polymer coupling, obtained by Microfluidics, is proposed and validated for theranostics and multimodal imaging applications. A coupled Hydrodynamic Flow Focusing (cHFF) is exploited to control the time scales of solvent exchange and the coupling of the polymer nanoprecipitation with the lipid self-assembly simultaneously, guiding the formation of Lipid–Polymer NPs (LiPoNs). This hybrid lipid–polymeric tool is made up of core–shell structure, where a polymeric chitosan core is enveloped in a lipid bilayer, capable of co-encapsulating simultaneously Gd-DTPA and Irinotecan/Atto 633 compounds. As a result, a monodisperse population of hybrid NPs with an average size of 77 nm, with preserved structural integrity in different environmental conditions and high biocompatibility, can be used for MRI and Optical applications. Furthermore, preliminary results show the enhanced delivery and therapeutic efficacy of Irinotecan-loaded hybrid formulation against U87 MG cancers cells.

Recent Advances in Synthesis and Degradation of Lignin and Lignin Nanoparticles and Their Emerging Applications in Nanotechnology

Lignin is an important commercially produced polymeric material. It is used extensively in both industrial and agricultural activities. Recently, it has drawn much attention from the scientific community. It is abundantly present in nature and has significant application in the production of biodegradable materials. Its wide usage includes drug delivery, polymers and several forms of emerging lignin nanoparticles. The synthesis of lignin nanoparticles is carried out in a controlled manner. The traditional manufacturing techniques are costly and often toxic and hazardous to the environment. This review article highlights simple, safe, climate-friendly and ecological approaches to the synthesis of lignin nanoparticles. The changeable, complex structure and recalcitrant nature of lignin makes it challenging to degrade. Researchers have discovered a small number of microorganisms that have developed enzymatic and non-enzymatic metabolic pathways to use lignin as a carbon source. These microbes show promising potential for the biodegradation of lignin. The degradation pathways of these microbes are also described, which makes the study of biological synthesis much easier. However, surface modification of lignin nanoparticles is something that is yet to be explored. This review elucidates the recent advances in the biodegradation of lignin in the ecological system. It includes the current approaches, methods for modification, new applications and research for the synthesis of lignin and lignin nanoparticles. Additionally, the intricacy of lignin’s structure, along with its chemical nature, is well-described. This article will help increase the understanding of the utilization of lignin as an economical and alternative-resource material. It will also aid in the minimization of solid waste arising from lignin.

Lignin Nanoparticles Deliver Novel Thymine Biomimetic Photo-Adducts with Antimelanoma Activity

We report here the synthesis of novel thymine biomimetic photo-adducts bearing an alkane spacer between nucleobases and characterized by antimelanoma activity against two mutated cancer cell lines overexpressing human Topoisomerase 1 (TOP1), namely SKMEL28 and RPMI7951. Among them, Dewar Valence photo-adducts showed a selectivity index higher than the corresponding pyrimidine-(6-4)-pyrimidone and cyclobutane counterpart and were characterized by the highest affinity towards TOP1/DNA complex as evaluated by molecular docking analysis. The antimelanoma activity of novel photo-adducts was retained after loading into UV photo-protective lignin nanoparticles as stabilizing agent and efficient drug delivery system. Overall, these results support a combined antimelanoma and UV sunscreen strategy involving the use of photo-protective lignin nanoparticles for the controlled release of thymine dimers on the skin followed by their sacrificial transformation into photo-adducts and successive inhibition of melanoma and alert of cellular UV machinery repair pathways.

Nanoprecipitation technology to prepare carrier systems of interest in pharmaceutics: An overview of patenting

Nanoprecipitation is a practical method to prepare carriers at the nanometric scale, which attracts attention in pharmaceutics because of its low cost, easy setup, the versatility of the starting materials, possibility to obtain different kinds of carriers, and minimal environmental impact. Since 1986, this technique has been extensively employed in research; therefore, this paper focuses on state of art regarding inventions wherein it is employed. To this end, 133 nanoprecipitation-based patent families are identified in the PatSnap® platform, which allows identifying general trends. Afterwards, a sample of 40 patent families reported as granted (21 families) or patent applications (19 families) during the last decade are studied in depth to establish the research tendencies. Undoubtedly, Chinese universities are positioned as leaders in this field, and cancer treatments are the more claimed use followed far behind for developments targeting neurodegenerative and diabetes diseases. New proposals on targeted and stimuli response particles are also claimed, and development of polymers, prodrugs, and improvements to the technique such as the flash-nanoprecipitation, use of microfluidics, or design of green process are relevant. Interestingly, nanoprecipitation-related patent families have significantly increased during the last decade, being the 71% of the total, which makes alluring the perspectives about its industrial harnessing.

Facile production of quercetin nanoparticles using 3D printed centrifugal flow reactors

A 3D printed reactor-in-a-centrifuge (RIAC) was developed to produce drug nanocrystals. Quercetin nanocrystals were manufactured at varying operational and formulation conditions, and had a small size (190–302 nm) and low size dispersity (PDI < 0.1).

Evaluating the impact of systematic hydrophobic modification of model drugs on the control, stability and loading of lipid-based nanoparticles

A significant number of new chemical entities in the drug development pipeline are poorly soluble, therefore routes that facilitate effective administration is of considerable value. Lipid nanoparticles have proved an attractive approach for drug delivery; however, challenges that include optimising drug loading and understanding the impact of drug physiochemical parameters on nanoparticle properties have limited progression. In this work, we investigate the effect of modifying the log P of a model drug on the formation and stability of lipid-based nanoparticles. A range of model drug analogues with systematically varying alkyl chains were produced using a lamivudine (nucleoside analog reverse transcriptase inhibitor) scaffold and processed into lipid nanoparticles by nanoprecipitation. Characterisation included evaluation of particle diameter, size distribution, drug loading and nanoformulation stability. A distinct correlation with the LaMer model of nucleation was observed and log P appeared to strongly influence rates of nucleation. Model drugs with high log P were uniform in particle size and distribution and offered enhanced stability. In addition, various model drug/lipid blends were produced and their physical properties were investigated using dynamic light scattering (DLS) and differential scanning calorimetry (DSC). Complex mixtures of lipids were shown to influence formulation crystallinity and strategies to form uniform and stable lipid based nanoparticles of high drug loading- through manipulation of log P are discussed.

Lycorine nanoparticles induce apoptosis through mitochondrial intrinsic pathway and inhibit migration and invasion in HepG2 cells

Lycorine-nanoparticles (LYC-NPs) were successfully synthesized using anti-solvent precipitation-freeze drying method, and characterized using transmission electron microscopy (TEM), particle size analysis and Fourier transform infrared spectroscopy (FTIR). Then, the antitumor effects of LYC-NPs against HepG2 cells were investigated, and the underlying molecular mechanisms were explored. Our results showed that LYC-NPs displayed potent antiproliferative against HepG2 cells concentration dependently. Flow cytometry analysis exhibited that LYC-NPs triggered apoptosis and impeded cell cycle in G0/G1 phase. Moreover, the up-regulated expression of cleaved caspases-3 and Bax, and decrease of mitochondrial membrane potential and the Bcl-2 expression were involved in LYC-NPs apoptosis, implying that LYC-NPs induced apoptosis via the mitochondrial-mediated apoptosis pathway. Furthermore, LYC-NPs distinctly impaired HepG2 cells migration and invasion with down-regulation of matrix metalloproteinase-2 (MMP-2) and MMP-9 expression. These results indicated that LYC-NPs could be an favorable agent for restraining the growth and metastasis of HepG2 cells.

Doxorubicin nanomedicine based on ginsenoside Rg1 with alleviated cardiotoxicity and enhanced antitumor activity

Aim: The authors aimed to develop Dox@Rg1 nanoparticles with decreased cardiotoxicity to expand their application in cancer. Materials & methods: Dox@Rg1 nanoparticles were developed by encapsulating doxorubicin (Dox) in a self-assembled Rg1. The antitumor effect of the nanoparticles was estimated using 4T1 tumor-bearing mice and the protective effect on the heart was investigated in vitro and in vivo. Results: Different from Dox, the Dox@Rg1 nanoparticles induced increased cytotoxicity to tumor cells, which was decreased in cardiomyocytes by the inhibition of apoptosis. The study in vivo revealed that the Dox@Rg1 nanoparticles presented a perfect tumor-targeting ability and improved antitumor effects. Conclusion: Dox@Rg1 nanoparticles could enhance the antitumor effects and decrease the cardiotoxicity of Dox.

Spherical Cellulose Micro and Nanoparticles: A Review of Recent Developments and Applications

Cellulose, the most abundant natural polymer, is a versatile polysaccharide that is being exploited to manufacture innovative blends, composites, and hybrid materials in the form of membranes, films, coatings, hydrogels, and foams, as well as particles at the micro and nano scales. The application fields of cellulose micro and nanoparticles run the gamut from medicine, biology, and environment to electronics and energy. In fact, the number of studies dealing with sphere-shaped micro and nanoparticles based exclusively on cellulose (or its derivatives) or cellulose in combination with other molecules and macromolecules has been steadily increasing in the last five years. Hence, there is a clear need for an up-to-date narrative that gathers the latest advances on this research topic. So, the aim of this review is to portray some of the most recent and relevant developments on the use of cellulose to produce spherical micro- and nano-sized particles. An attempt was made to illustrate the present state of affairs in terms of the go-to strategies (e.g., emulsification processes, nanoprecipitation, microfluidics, and other assembly approaches) for the generation of sphere-shaped particles of cellulose and derivatives thereof. A concise description of the application fields of these cellulose-based spherical micro and nanoparticles is also presented.

Particle Integrity and Size Effect on the Journey of Polymeric Nanocarriers in Zebrafish Model and the Correlation with Mice

Polymeric nanocarriers have high biocompatibility for potential drug delivery applications. After entering bloodstream, nanocarriers will circulate, interact with proteins, dissociate, or be cleared by reticuloendothelial system. Zebrafish as a visual animal model, can serve as a tool for screening nanomedicines and monitoring nanocarrier behaviors in vivo. However, a comprehensive correlation between zebrafish and rodent models is currently deficient. Here, different-sized poly(caprolactone) nanocarriers (PCL NCs) are fabricated with or without PEGylation to investigate correlation between zebrafish and mice regarding their biofate via Förster resonance energy transfer technique. Results show that PEGylated PCL NCs have higher integrity in both zebrafish and mice. Small PEG-PCL NCs have longer circulation, while large PEG-PCL NCs have dramatically higher macrophage sequestration in zebrafish and mice spleen, leading to poor circulation. PCL NCs dissociate rapidly with less macrophage sequestration. Moreover, in 7 days postfertilization (dpf) zebrafish, polymers are eliminated via hepatobiliary pathway, which is not fully functional at earlier stages of development. The effects of nanocarrier integrity on macrophage sequestration in zebrafish and good correlation with mice spleen are pioneered to be demonstrated. The findings suggest that 7 dpf zebrafish are suitable as an in vivo screening model of nanocarriers and predict their biofate in rodents.

Tunable Polyglycerol-Based Redox-Responsive Nanogels for Efficient Cytochrome C Delivery

The sensitivity of therapeutic proteins is a challenge for their use in biomedical applications, as they are prone to degradation and opsonization, thus limiting their potential. This demands for the development of drug delivery systems shielding proteins and releasing them at the site of action. Here, we describe the synthesis of novel polyglycerol-based redox-responsive nanogels and report on their potential as nanocarrier systems for the delivery of cytochrome C (CC). This system is based on an encapsulation protocol of the therapeutic protein into the polymer network. NGs were formed via inverse nanoprecipitation using inverse electron-demand Diels–Alder cyclizations (iEDDA) between methyl tetrazines and norbornenes. Coprecipitation of CC led to high encapsulation efficiencies. Applying physiological reductive conditions of l-glutathione (GSH) led to degradation of the nanogel network, releasing 80% of the loaded CC within 48 h while maintaining protein functionality. Cytotoxicity measurements revealed high potency of CC-loaded NGs for various cancer cell lines with low IC₅₀ values (up to 30 μg·mL⁻¹), whereas free polymer was well tolerated up to a concentration of 1.50 mg·mL⁻¹. Confocal laser scanning microscopy (CLSM) was used to monitor internalization of free and CC-loaded NGs and demonstrate the protein cargo’s release into the cytosol.

Screening of high-efficiency and low-toxicity antitumor active components in Macleaya cordata seeds based on the competitive effect of drugs on double targets by a new laminar flow chip

It is urgent to obtain targeted drugs that selectively bind to pathological targets rather than physiological targets in the early stage of drug screening. G-Quadruplex has become one of the important targets in the development of anti-tumor drugs. However, drugs that target quadruplexes may also bind to dsDNA, which may lead to adverse reactions. In this study, a new three-phase laminar flow chip was constructed to enable the multi-components of a traditional Chinese medicine extract to dynamically and competitively bind with G-quadruplex DNA (on target) and double-stranded DNA (off target), so as to select high-efficiency and low-toxicity anti-tumor drugs. The results showed that there were five compounds in the extracts of Macleaya cordata seeds that exhibited obvious differences in binding to the two targets. Furthermore, the binding constants and modes of four identified alkaloids as they bound to two DNA targets were verified by fluorescence spectra and molecular docking methods. The toxicity to HepG2 and LO2 cells from the four alkaloids was also compared. The results showed that sanguinarine and chelerythrine could be used as candidate drugs with stronger binding to HT24 than DNA26. The chip can also be used for other types of double-target screening of other traditional Chinese medicine extracts or compound libraries.

Enhanced solubility of Albendazole in Cyclodextrin Inclusion Complex: A Molecular Modeling Approach and Physicochemical Evaluation

BACKGROUND

Albendazole (ABZ) is the drug of choice for the treatment of a variety of human and veterinary parasites. However, it has low aqueous solubility and low bioavailability. Cyclodextrins (CD) are pharmaceutical excipients with the ability to modulate the solubilization property of hydrophobic molecules.

OBJECTIVE

To analyze (Autodock Vina software and CycloMolder platform) the formation of inclusion complexes between ABZ, β-cyclodextrin (β-CD) and its derivatives, Methyl-β-cyclodextrin (M-β-CD) and Hydroxypropyl-β-cyclodextrin (HP-β-CD), through in vitro and in silico studies.

METHODS

The most stable inclusion complexes were produced by the kneading method and characterized by Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), X-Ray Diffraction (XRD), determination of the ABZ content, and in vitro dissolution profile.

RESULTS

Molecular modeling revealed that inclusion complexes between HP-β-CD:ABZ (in the proportion 1:1 and 2:1) presented the lowest formation energy and the highest number of intermolecular interactions, showing that the use of more cyclodextrins does not provide any gain in the stability of the complex. Through the characterization tests, the complexes experimentally obtained by kneading method demonstrated a highly suggestive method, including ABZ in HP-β-CD in both molar proportions; The results of this study showed suppression of bands in the infrared spectrum, displacement of the drug's melting temperature in DSC, crystallinity halos instead of the characteristic peaks of ABZ crystals in the XRD and a release of more than 80% of ABZ in less than 5 minutes, beyond dissolution efficiency of up to 92%.

CONCLUSION

In silico studies provided a rational selection of the appropriate cyclodextrin, enabling the elaboration of more targeted complexes, decreasing time and costs to elaborate on new formulations that increase the oral biodisponibility of ABZ.

Effect of Modifications in Poly (Lactide-co-Glycolide) (PLGA) on Drug Release and Degradation Characteristics: A Mini Review

The use of PLGA in the pharmaceutical industry has only increased as we move towards more and more advanced delivery carrier systems. The qualities of PLGA like biocompatibility, biodegradability and a tunable degradation and drug release has only helped in keeping up the release requirements desired for various delivery platforms. Fine-tuning the release and degradation rate is gaining more and more attention as researchers keep pushing the boundaries of novel delivery carriers. Various experiments are being performed to understand the degradation behavior drug of PLGA under various physiological and process-related conditions. The understanding of these parameters has helped formulate various ways one can fine-tune the properties that can lead to the release of active ingredients encapsulated within. Various techniques have been tried and tested including modifications like chemical modifications, physical blending and surface modifications and have found to be effective means of release modulation in delivery systems like parenteral, orals, topicals and tissue engineering scaffolds. In this review, all these experiments and implications thereon have been discussed in detail.

Excipient-Free Pure Drug Nanoparticles Fabricated by Microfluidic Hydrodynamic Focusing

Nanoprecipitation is one of the most versatile methods to produce pure drug nanoparticles (PDNPs) owing to the ability to optimize the properties of the product. Nevertheless, nanoprecipitation may result in broad particle size distribution, low physical stability, and batch-to-batch variability. Microfluidics has emerged as a powerful tool to produce PDNPs in a simple, reproducible, and cost-effective manner with excellent control over the nanoparticle size. In this work, we designed and fabricated T- and Y-shaped Si-made microfluidic devices and used them to produce PDNPs of three kinase inhibitors of different lipophilicity and water-solubility, namely imatinib, dasatinib and tofacitinib, without the use of colloidal stabilizers. PDNPs display hydrodynamic diameter in the 90-350 nm range as measured by dynamic light scattering and a rounded shape as visualized by high-resolution scanning electron microscopy. Powder X-ray diffraction and differential scanning calorimetry confirmed that this method results in highly amorphous nanoparticles. In addition, we show that the flow rate of solvent, the anti-solvent, and the channel geometry of the device play a key role governing the nanoparticle size.

Development of an antibacterial nanocomposite hydrogel for human dental pulp engineering

Hydrogel-based regenerative endodontic procedures (REPs) are considered to be very promising therapeutic strategies to reconstruct the dental pulp (DP) tissue in devitalized human teeth. However, the success of the regeneration process is limited by residual bacteria that may persist in the endodontic space after the disinfection step and contaminate the biomaterial. The aim of this work was to develop an innovative fibrin hydrogel incorporating clindamycin (CLIN)-loaded Poly (d,l) Lactic Acid (PLA) nanoparticles (NPs) to provide the hydrogel with antibacterial properties. CLIN-PLA-NPs were synthesized by a surfactant-free nanoprecipitation method and their microphysical properties were assessed by dynamic light scattering, electrophoretic mobility and scanning electron microscopy. Their antimicrobial efficacy was evaluated on Enteroccocus fæcalis by the determination of the minimal inhibitory concentration (MIC) and the minimal biofilm inhibition and eradication concentrations (MBIC and MBEC). Antibacterial properties of the nanocomposite hydrogel were verified by agar diffusion assays. NP distribution into the hydrogel and release from it were evaluated using fluorescent PLA-NPs. NP cytotoxicity was assessed on DP mesenchymal stem cells (DP-MSCs) incorporated into the hydrogel. Type I collagen synthesis was investigated after 7 days of culture by immunohistochemistry. We found that CLIN-PLA-NPs displayed a drug loading of 10 ± 2 μg per mg of PLA polymer and an entrapment efficiency of 43 ± 7%. Antibiotic loading did not affect NP size, polydispersity index and zeta potential. The MIC for Enterococcus fæcalis was 32 μg mL-1. MBIC50 and MBEC50 were 4 and 16 μg mL-1, respectively. CLIN-PLA-NPs appeared homogenously distributed throughout the hydrogel. CLIN-PLA-NP-loaded hydrogels clearly inhibited E. faecalis growth. DP-MSC viability and type I collagen synthesis within the fibrin hydrogel were not affected by CLIN-PLA-NPs. In conclusion, CLIN-PLA-NP incorporation into the fibrin hydrogel gave the latter antibacterial and antibiofilm properties without affecting cell viability and function. This formulation could help establish an aseptic environment supporting DP reconstruction and, accordingly, might be a valuable tool for REPs.

Synthesis of Rough Colloidal SU-8 Rods and Bananas via Nanoprecipitation

Surface roughness plays an important role in determining the mechanical properties, wettability, and self-assembly in colloidal systems. In this work, we develop a simple and fast method to produce rough colloidal SU-8 rods, bananas, and spheres, via the nanoprecipitation of SU-8 in water. During this process, SU-8 nanospheres are absorbed onto the surface of the colloidal SU-8 particles and then cross-linked using UV-light. The size of the spherical asperities and the asperity density are controlled by the concentration of SU-8 used during the nanoprecipitation reaction. Fluorescent labeling of the rough SU-8 colloidal particles allows for their confocal imaging, which demonstrates their stability at high packing fractions. With these newly developed rough particles, we provide a colloidal model system that allows for studies addressing the impact of surface roughness on materials composed of anisotropic particles.

Cell adhesion molecule-mediated therapeutic strategies in atherosclerosis: From a biological basis and molecular mechanism to drug delivery nanosystems

Atherosclerosis (AS), characterized by pathological constriction of blood vessels due to chronic low-grade inflammation and lipid deposition, is a leading cause of human morbidity and mortality worldwide. Cell adhesion molecules (CAMs) have the ability to regulate the inflammatory response and endothelial function, as well as potentially driving plaque rupture, which all contribute to the progression of AS. Moreover, recent advances in the development of clinical agents in the cardiovascular field are based on CAMs, which show promising results in the fight against AS. Here, we review the current literature on mechanisms by which CAMs regulate atherosclerotic progression from the earliest induction of inflammation to plaques formation. In particular, we focused on therapeutic strategies based on CAMs inhibitors that prevent leukocyte from migrating to endothelium, including high-affinity antibodies and antagonists, nonspecific traditional medicinal formulas and lipid lowering drugs. The CAMs-based drug delivery nanosystem and the available data on the more reasonable and effective clinical application of CAMs inhibitors have been emphasized, raising hope for further progress in the field of AS therapy.

Recent Advances in Microfluidics for the Preparation of Drug and Gene Delivery Systems

Drug delivery systems (DDSs) have great potential for improving the treatment of several diseases, especially microbial infections and cancers. However, the formulation procedures of DDSs remain challenging, especially at the nanoscale. Reducing batch-to-batch variation and enhancing production rate are some of the essential requirements for accelerating the translation of DDSs from a small scale to an industrial level. Microfluidic technologies have emerged as an alternative to the conventional bench methods to address these issues. By providing precise control over the fluid flows and rapid mixing, microfluidic systems can be used to fabricate and engineer different types of DDSs with specific properties for efficient delivery of a wide range of drugs and genetic materials. This review discusses the principles of controlled rapid mixing that have been employed in different microfluidic strategies for producing DDSs. Moreover, the impact of the microfluidic device design and parameters on the type and properties of DDS formulations was assessed, and recent applications in drug and gene delivery were also considered.

Bio-Based Nanoparticles as a Carrier of β-Carotene: Production, Characterisation and In Vitro Gastrointestinal Digestion

β-carotene loaded bio-based nanoparticles (NPs) were produced by the solvent-displacement method using two polymers: zein and ethylcellulose. The production of NPs was optimised through an experimental design and characterised in terms of average size and polydispersity index. The processing conditions that allowed to obtain NPs (<100 nm) were used for β-carotene encapsulation. Then β-carotene loaded NPs were characterised in terms of zeta potential and encapsulation efficiency. Transmission electron microscopy, Fourier transform infrared spectroscopy and X-ray diffraction analysis were performed for further morphological and chemical characterisation. In the end, a static in vitro digestion following the INFOGEST protocol was performed and the bioaccessibility of β-carotene encapsulated in both NPs was determined. Results show that the best conditions for a size-controlled production with a narrow size distribution are lower polymer concentrations and higher antisolvent concentrations. The encapsulation of β-carotene in ethylcellulose NPs resulted in nanoparticles with a mean average size of 60 ± 9 nm and encapsulation efficiency of 74 ± 2%. β-carotene loaded zein-based NPs resulted in a mean size of 83 ± 8 nm and encapsulation efficiency of 93 ± 4%. Results obtained from the in vitro digestion showed that β-carotene bioaccessibility when encapsulated in zein NPs is 37 ± 1%, which is higher than the value of 8.3 ± 0.1% obtained for the ethylcellulose NPs.

RETRACTED: Sustained delivery of epalrestat to the retina using PEGylated solid lipid nanoparticles laden contact lens

This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor-in-Chief. Significant similarities were noticed post-publication between this article and an article submitted to the Journal of Drug Delivery Science and Technology on the same day, by an apparently unrelated research group: Tong Zhang, Tianhui Zhu, Fanyin Wang, Ling Peng and Mingying Lai 60 (2020) 101949 https://doi.org/10.1016/j.jddst.2020.101949 Moreover, the authors did not respond to the journal request to comment on these similarities and to provide the raw data, and the Editor-in-Chief decided to retract the article. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and genuine. As such this article represents a severe abuse of the scientific publishing system.

Bioinspired lipid-polysaccharide modified hybrid nanoparticles as a brain-targeted highly loaded carrier for a hydrophilic drug

Lipid-polysaccharide modified biohybrid nanoparticles (NPs) are eminent drug carriers for brain targeting, owing to their ability to prolong the circulation time and penetrate the blood brain barrier (BBB). Biohybrid NPs particular interest arises from their potential to mimic biological components. Herein, we prepared bioinspired lipid polymeric NPs, either naked or surface modified by a synthesized biocompatible dextran-cholic acid (DxC). The nanoprecipitation method was tailored to allow the assembly of the multicomponent NPs in a single step. Modulating the solvent/antisolvent system provided lipid polymer hybrid NPs in the size of 111.6 ± 11.4 nm size. The NPs encapsulated up to 92 ± 1.2% of a hydrophilic anti-Alzheimer drug, rivastigmine (Riv). The brain uptake, biodistribution and pharmacokinetics studies, proved the efficient fast penetration of the bioinspired surface modified NPs to the brain of healthy albino rats. The modified nanocarrier caused a 5.4 fold increase in brain targeting efficiency compared to the drug solution. Furthermore, the presence of DxC increased Riv's brain residence time up to 40 h. The achieved results suggest that the fabricated biohybrid delivery system was able to circumvent the BBB and is expected to minimize Riv systemic side effects.

Polymeric micelles for the delivery of poorly soluble drugs: From nanoformulation to clinical approval

Over the last three decades, polymeric micelles have emerged as a highly promising drug delivery platform for therapeutic compounds. Particularly, poorly soluble small molecules with high potency and significant toxicity were encapsulated in polymeric micelles. Polymeric micelles have shown improved pharmacokinetic profiles in preclinical animal models and enhanced efficacy with a superior safety profile for therapeutic drugs. Several polymeric micelle formulations have reached the clinical stage and are either in clinical trials or are approved for human use. This furthers interest in this field and underscores the need for additional learning of how to best design and apply these micellar carriers to improve the clinical outcomes of many drugs. In this review, we provide detailed information on polymeric micelles for the solubilization of poorly soluble small molecules in topics such as the design of block copolymers, experimental and theoretical analysis of drug encapsulation in polymeric micelles, pharmacokinetics of drugs in polymeric micelles, regulatory approval pathways of nanomedicines, and current outcomes from micelle formulations in clinical trials. We aim to describe the latest information on advanced analytical approaches for elucidating molecular interactions within the core of polymeric micelles for effective solubilization as well as for analyzing nanomedicine's pharmacokinetic profiles. Taking into account the considerations described within, academic and industrial researchers can continue to elucidate novel interactions in polymeric micelles and capitalize on their potential as drug delivery vehicles to help improve therapeutic outcomes in systemic delivery.

Evaluation of Self-Assembly Pathways to Control Crystallization-Driven Self-Assembly of a Semicrystalline P(VDF-co-HFP)-b-PEG-b-P(VDF-co-HFP) Triblock Copolymer

To date, amphiphilic block copolymers (BCPs) containing poly(vinylidene fluoride-co-hexafluoropropene) (P(VDF-co-HFP)) copolymers are rare. At moderate content of HFP, this fluorocopolymer remains semicrystalline and is able to crystallize. Amphiphilic BCPs, containing a P(VDF-co-HFP) segment could, thus be appealing for the preparation of self-assembled block copolymer morphologies through crystallization-driven self-assembly (CDSA) in selective solvents. Here the synthesis, characterization by 1H and 19F NMR spectroscopies, GPC, TGA, DSC, and XRD; and the self-assembly behavior of a P(VDF-co-HFP)-b-PEG-b-P(VDF-co-HFP) triblock copolymer were studied. The well-defined ABA amphiphilic fluorinated triblock copolymer was self-assembled into nano-objects by varying a series of key parameters such as the solvent and the non -solvent, the self-assembly protocols, and the temperature. A large range of morphologies such as spherical, square, rectangular, fiber-like, and platelet structures with sizes ranging from a few nanometers to micrometers was obtained depending on the self-assembly protocols and solvents systems used. The temperature-induced crystallization-driven self-assembly (TI-CDSA) protocol allowed some control over the shape and size of some of the morphologies.

Ultrabright Fluorescent Polymeric Nanoparticles with a Stealth Pluronic Shell for Live Tracking in the Mouse Brain

Visualizing single organic nanoparticles (NPs) in vivo remains a challenge, which could greatly improve our understanding of the bottlenecks in the field of nanomedicine. To achieve high single-particle fluorescence brightness, we loaded polymer poly(methyl methacrylate)-sulfonate (PMMA-SO₃H) NPs with octadecyl rhodamine B together with a bulky hydrophobic counterion (perfluorinated tetraphenylborate) as a fluorophore insulator to prevent aggregation-caused quenching. To create NPs with stealth properties, we used the amphiphilic block copolymers pluronic F-127 and F-68. Fluorescence correlation spectroscopy and Förster resonance energy transfer (FRET) revealed that pluronics remained at the NP surface after dialysis (at one amphiphile per 5.5 nm²) and prevented NPs from nonspecific interactions with serum proteins and surfactants. In primary cultured neurons, pluronics stabilized the NPs, preventing their prompt aggregation and binding to neurons. By increasing dye loading to 20 wt % and optimizing particle size, we obtained 74 nm NPs showing 150-fold higher single-particle brightness with two-photon excitation than commercial Nile Red-loaded FluoSpheres of 39 nm hydrodynamic diameter. The obtained ultrabright pluronic-coated NPs enabled direct single-particle tracking in vessels of mice brains by two-photon intravital microscopy for at least 1 h, whereas noncoated NPs were rapidly eliminated from the circulation. Following brain injury or neuroinflammation, which can open the blood-brain barrier, extravasation of NPs was successfully monitored. Moreover, we demonstrated tracking of individual NPs from meningeal vessels until their uptake by meningeal macrophages. Thus, single NPs can be tracked in animals in real time in vivo in different brain compartments and their dynamics visualized with subcellular resolution.

Molecular Interactions in Solid Dispersions of Poorly Water-Soluble Drugs

Physicochemical characterization is a crucial step for the successful development of solid dispersions, including the determination of drug crystallinity and molecular interactions. Typically, the detection of molecular interactions will assist in the explanation of different drug performances (e.g., dissolution, solubility, stability) in solid dispersions. Various prominent reviews on solid dispersions have been reported recently. However, there is still no overview of recent techniques for evaluating the molecular interactions that occur within solid dispersions of poorly water-soluble drugs. In this review, we aim to overview common methods that have been used for solid dispersions to identify different bond formations and forces via the determination of interaction energy. In addition, a brief background on the important role of molecular interactions will also be described. The summary and discussion of methods used in the determination of molecular interactions will contribute to further developments in solid dispersions, especially for quick and potent drug delivery applications.

High Throughput Preparation of Poly(Lactic-Co-Glycolic Acid) Nanoparticles Using Fiber Fluidic Reactor

Polymeric nanoparticles (NPs) have a variety of biomedical, biotechnology, agricultural and environmental applications. As such, a great need has risen for the fabrication of these NPs in large scales. In this study, we used a high throughput fiber reactor for the preparation of poly(lactic-co-glycolic acid) (PLGA) NPs via nanoprecipitation. The fiber reactor provided a high surface area for the controlled interaction of an organic phase containing the PLGA solution with an aqueous phase, containing poly(vinyl alcohol) (PVA) as a stabilizer. This interaction led to the self-assembly of the polymer into the form of NPs. We studied operational parameters to identify the factors that have the greatest influence on the properties of the resulting PLGA NPs. We found that the concentration of the PLGA solution is the factor that has the greatest effect on NP size, polydispersity index (PDI), and production rate. Increasing PLGA concentration increased NP sizes significantly, while at the same time decreasing the PDI value. The second factor that was found to affect NP properties was the concentration of PVA solution, which resulted in increased NP sizes and decreased production rates. Flowrates of the feed streams also affected NP size to a lesser extent, while changing the operational temperature did not change the product's features. In general, the results demonstrate that fiber reactors are a suitable method for the large-scale, continuous preparation of polymeric NPs suitable for biomedical applications.

Microflow Nanoprecipitation of Positively Charged Gastroresistant Polymer Nanoparticles of Eudragit® RS100: A Study of Fluid Dynamics and Chemical Parameters

The objective of the present work was to produce gastroresistant Eudragit^® RS100 nanoparticles by a reproducible synthesis approach that ensured mono-disperse nanoparticles under the size of 100 nm. Batch and micromixing nanoprecipitation approaches were selected to produce the demanded nanoparticles, identifying the critical parameters affecting the synthesis process. To shed some light on the formulation of the targeted nanoparticles, the effects of particle size and homogeneity of fluid dynamics, and physicochemical parameters such as polymer concentration, type of solvent, ratio of solvent to antisolvent, and total flow rate were studied. The physicochemical characteristics of resulting nanoparticles were studied applying dynamic light scattering (DLS) particle size analysis and electron microscopy imaging. Nanoparticles produced using a micromixer demonstrated a narrower and more homogenous distribution than the ones obtained under similar conditions in conventional batch reactors. Besides, fluid dynamics ensured that the best mixing conditions were achieved at the highest flow rate. It was concluded that nucleation and growth events must also be considered to avoid uncontrolled nanoparticle growth and evolution at the collection vial. Further, rifampicin-encapsulated nanoparticles were prepared using both approaches, demonstrating that the micromixing-assisted approach provided an excellent control of the particle size and polydispersity index. Not only the micromixing-assisted nanoprecipitation promoted a remarkable control in the nanoparticle formulation, but also it enhanced drug encapsulation efficiency and loading, as well as productivity. To the best of our knowledge, this was the very first time that drug-loaded Eudragit^® RS100 nanoparticles (NPs) were produced in a continuous fashion under 100 nm (16.5 ± 4.3 nm) using microreactor technology. Furthermore, we performed a detailed analysis of the influence of various fluid dynamics and physicochemical parameters on the size and uniformity of the resulting nanoparticles. According to these findings, the proposed methodology can be a useful approach to synthesize a myriad of nanoparticles of alternative polymers.

Preparation of high drug-loading celastrol nanosuspensions and their anti-breast cancer activities in vitro and in vivo

As one of the main components of Tripterygium wilfordii Hook F, celastrol (CSL) has significant antitumor activity, but its clinical application has been limited by its poor solubility, low oral bioavailability and systemic toxicity. In this study, celastrol nanosuspensions (CSL-NSps) were prepared using an antisolvent precipitation method with poloxamer 188 (P-188) as a stabilizer at a high CSL/P-188 feeding ratio of 8:1. The resultant CSL was spherical in shape with an average particle size of 147.9 nm, a polydispersity index (PDI) of 0.12 and zeta potential of -19.2 mV. The encapsulation efficiency and drug loading content were 98.18% and 86.83%, respectively, and the X-ray diffraction (XRD) pattern showed that CSL existed in an amorphous state in the nanosuspensions. CSL-NSps were quite stable in various physiological media and plasma and were both suitable for oral and intravenous administration. Nanosuspensions greatly enhanced the in vitro dissolution, and the cumulative drug release reached approximately 69.20% within 48 h. In vivo, CSL-NSps (3 mg/kg, i.g.) displayed a significantly enhanced tumor inhibition rate (TIR) in comparison with that of CSL suspension when administered orally (TIR, 50.39%, vs. 41.16%, p < 0.05),  similar to that of PTX injection (8 mg/kg, i.v. TIR, 50.88%). CSL-NSps showed even better therapeutic efficacy than PTX injection (TIR, 64.18%, p < 0.01) when intravenously injected. This has demonstrated that, with the help of nanosuspensions, CSL is likely to be an effective and promising antitumor agent in clinic practice for the treatment of breast cancer.

Microfluidics for pharmaceutical nanoparticle fabrication: The truth and the myth

Using micro-sized channels to manipulate fluids is the essence of microfluidics which has wide applications from analytical chemistry to material science and cell biology research. Recently, using microfluidic-based devices for pharmaceutical research, in particular for the fabrication of micro- and nano-particles, has emerged as a new area of interest. The particles that can be prepared by microfluidic devices can range from micron size droplet-based emulsions to nano-sized drug loaded polymeric particles. Microfluidic technology poses unique advantages in terms of the high precision of the mixing regimes and control of fluids involved in formulation preparation. As a result of this, monodispersity of the particles prepared by microfluidics is often recognised as being a particularly advantageous feature in comparison to those prepared by conventional large-scale mixing methods. However, there is a range of practical drawbacks and challenges of using microfluidics as a direct micron- and nano-particle manufacturing method. Technological advances are still required before this type of processing can be translated for application by the pharmaceutical industry. This review focuses specifically on the application of microfluidics for pharmaceutical solid nanoparticle preparation and discusses the theoretical foundation of using the nanoprecipitation principle to generate particles and how this is translated into microfluidic design and operation.