Functionality of porous starch obtained by amylase or amyloglucosidase treatments

Acorn flour and sourdough: an innovative combination to improve gluten free bread characteristics

Nowadays, challenges in gluten free breads (GFB) are focused on improving the nutritional and health benefits. Acorn flour is an underexploited sustainable ingredient, naturally gluten free, with many nutritional and technological advantages. The aim of this study was to explore the interaction of acorn flour supplementation (up to 35%) to rice flour and sourdough process to obtain rice based GFB. Different levels of rice flour replacement with acorn flour (0%, 23% and 35%), and sourdough (20%) were tested in a basic GFB recipe, and technological, nutritional, and functional GFB characteristics evaluated. The combination of acorn flour and sourdough was responsible for acidifying dough and bread. Breads containing 35:65 acorn flour: rice flour led to harder breads with lower crumb luminosity and with reddish and brownish tones, besides improved structural features when adding sourdough. That combination of sourdough and acorn flour reduced the rate and the extent of starch hydrolysis, as well as increase the minerals content, total phenolic compounds and antioxidant activity. Therefore, the combination of acorn flour and sourdough process allows obtaining rice based GFB with better nutritional pattern.

Preparation and characterization of tranexamic acid modified porous starch and its application as a hemostatic agent

Effective bleeding control is essential for the reduction of traumatic deaths among civilians and military personnel, particularly for physical visceral and arteriovenous injuries. Materials with good hemostatic properties have recently attracted significant scientific attention. In this study, a novel material of tranexamic acid modified porous starch (TAMPS) was produced through esterification. The structure of the final product was characterized using Fourier-transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and thermogravimetric analysis. The hemostatic effect of TAMPS was preliminarily analyzed via in vitro clotting time, mouse tail amputation model and liver injury model experiments. Hemostatic effect of TAMPS was found to be significantly better than that of the positive control Quickclean. Through the exploration of related hemostatic mechanisms, TAMPS can promote coagulation via rapid fluid absorption and high erythrocyte aggregation capacity. The in vitro cytotoxicity, acute toxicity, and hemolysis tests revealed that TAMPS is safe and nontoxic and has perfect blood compatibility. Therefore, the TAMPS has a great potential for future clinical application as a rapid and multitarget hemostatic material.

Construction of ferulic acid modified porous starch esters for improving the antioxidant capacity

For exploration of a type of synthetic antioxidant dietary fiber (ADF), porous starch (PS), modified by esterification with ferulic acid (FA) moieties, was synthesized successfully, with different degree of substitution (DS). The ester linkage of FA modified PS was confirmed by 13C solid-state NMR and FT-IR. XRD analysis showed that starch ferulates had a different crystal structure from the V-type pattern of native starch, suggesting that the starch gelled during the esterification reaction, then re-crystallized into a different structure. Morphological studies revealed that FA modified PS esters had a different morphology of irregular beehive-like and dense fibrous-like structures compared with that of native starch. In vitro antioxidant assays showed that starch ferulates had excellent antioxidant capacity. In particular, FA modified PS esters had a much higher antioxidant capacity than free FA in the β-carotene-linoleic acid assay. This study has advanced the technology of using porous starches for modifying the biological activity of an antioxidant polyphenol. We expect this work would inspire further studies on the interactions of phenolics with other food ingredients in the food industry.

New Techniques in Structural Tailoring of Starch Functionality

Inherent characteristics of native starches such as water insolubility, retrogradation and syneresis, and instability in harsh processing conditions (e.g., high temperature and shearing, low pH) limit their industrial applications. As starch properties mainly depend on starch composition and structure, structural tailoring of starch has been important for overcoming functional limitations and expanding starch applications in different fields. In this review, we first introduce the basics of starch structure, properties, and functionalities and then describe the interactions of starch with lipids, polysaccharides, and phenolics. After reviewing genetic, chemical, and enzymatic modifications of starch, we describe current progress in the areas of porous starch and starch-based nanoparticles. New techniques, such as using the CRISPR-Cas9 technique to tailor starch structures and using an emulsion-assisted approach in forming functional starch nanoparticles, are only feasible when they are established based on fundamental knowledge of starch. Expected final online publication date for the Annual Review of Food Science and Technology, Volume 13 is March 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Properties and digestibility of a novel porous starch from lotus seed prepared via synergistic enzymatic treatment

The objective was to investigate the effect of synergistic enzymatic treatment on the properties and digestibility of a novel C-type lotus seed porous starch (LPS). Scanning electron microscopy showed that the densest and most complete pores were formed on the surface of LPS when the concentration of enzymes added was 1.5% (LS-1.5E). With increases in enzyme addition, the oil and water absorption of the porous starch increased and reached maxima at 1.5% of enzyme. Increased in the specific surface area, total pore volume and average pore diameter of LPS were determined by low-temperature nitrogen adsorption, while when the enzymes exceeded 1.5%, there were no significant changes. Compared to lotus seed starch (LS), the particle size of LPS also decreased. With the increases in enzyme addition, LPS exhibited higher relative crystallinity and ordering structure by XRD and FTIR. The results by SAXS confirmed that LPS had higher ordered semi-crystalline lamellar and denser lamellar structure compared to LS. Low-field ¹H NMR spectroscopy indicated that the proportion of bound water in LPS increased, while the proportion of bulk water decreased. Moreover, the degree of hydrolysis of LPS was lower than that of LS, and the content of rapidly digestible starch decreased, while the content of slowly digestible starch and resistant starch increased with the enzyme addition, which was consistent with the structural properties.

Novel active starch films incorporating tea polyphenols-loaded porous starch as food packaging materials

A novel active food packaging film was developed by casting a corn starch/tea polyphenol (TP)-loaded porous starch (PS, obtained by enzymatic hydrolysis) film forming solution, with the latter helping to regulate the slow release of TP. Results showed that PS had a favorable TP adsorption capacity, and the casted films had a homogeneous distribution of the formulation components. Likewise, the active films had good mechanical properties, UV barrier properties, thermal stability, and excellent antioxidant properties. The slow release of TP from the films was sustained, which is a desired characteristic for extending the protection afforded by the active film to the food under consideration.

Morphological, structural and physicochemical properties of rice starch nanoparticles prepared via ultra-high pressure homogenization

Native rice starches were treated with five periods of ultra-high pressure homogenization (UHPH) under each of 60, 80, 100, 120, 140 and 160 MPa, respectively. The morphological, structural and physicochemical properties of starches treated with UHPH were examined. The mean particle diameter of starch nanoparticles ranged between 154.20 and 260.40 nm. SEM revealed that the granular amorphous region of starch granules was damaged under pressures between 60 and 80 MPa, and the crystalline region was further destroyed under pressures as high as 100–160 MPa. DSC demonstrated that the gelatinization temperatures and enthalpies of nanoparticles reduced. The relative crystallinity reduced from 22.90 to 13.61% as the pressure increased. FTIR showed that the absorbance ratio at 1047/1022 cm−1 decreased, and increased at 1022/995 cm−1. RVA results indicated that the viscosity of starch samples increased between 60 and 120 MPa, and the reverse effect was observed under 140 and 160 MPa.

Corn starch modification during endogenous malt amylases: The impact of synergistic hydrolysis time of α-amylase and β-amylase and limit dextrinase

To expand the utility of barley malts and decrease the cost of enzyme-modified starch production, the structural and physicochemical characteristics of corn starch modified with fresh barley malts at different hydrolysis time were investigated. The results indicated that compared to native starch, A chain (DP 6-12) of the enzyme-treated starches increased at hydrolysis time (≤12 h), but it decreased at hydrolysis time (>12 h). Inversely, B chains (DP > 13) decreased at hydrolysis time (≤12 h) and they generally increased at hydrolysis time (>12 h). The relative crystallinity decreased from 25.63% to 21.38% and 1047 cm^-1/1022 cm^-1 reduced from 1.042 to 0.942 after endogenous malt amylases at hydrolysis time from 0 to 72 h, and the thermal degradation temperatures decreased from 323.19 to 295.94 °C, whereas the gelatinization temperatures slightly increased. The gel strength decreased at hydrolysis time less than 12 h, but it increased at hydrolysis time more than 12 h. The outcomings would provide a theoretical and applicative basis about how endogenous malt amylases with lower price modify starches to obtain desirable starch derivatives and industrial production.

Pickering emulsifiers based on enzymatically modified quinoa starches: Preparation, microstructures, hydrophilic property and emulsifying property

Quinoa starch was developed as a new kind of Pickering emulsifier by enzymatic modification. The morphological structure, crystalline structure, lamellar structure, fractal structure, particle size distribution, contact angle, emulsion index (EI), and emulsion micromorphology were studied to explore the relationship between structure characteristics, hydrophilic property, and emulsifying properties of enzymatically modified (EM) quinoa starches. With the increasing enzymatic hydrolysis time in the test range of 0-9 h, particle size of EM quinoa starch decreased, and the broken starch and contact angle of EM quinoa starch increased; the EI value of emulsions with EM quinoa starch increased, and the oil droplet size of emulsions with EM quinoa starch decreased. It suggested that both the smallest particle size and the closest extent of the contact angle to 90° derived the best emulsifying property of EM-9. The EM quinoa starch had higher emulsifying capacity at higher oil volume fraction (Φ) (50%) than at lower Φ (20%), proving that the EM starch has potential to be used as Pickering emulsifiers in higher oil products, such as salad dressing.

Novel porous starch/alginate hydrogels for controlled insulin release with dual response to pH and amylase

An important principle in the development of oral insulin is to protect insulin from the harsh conditions of the stomach and release it in a controlled manner in the intestine. In the present study, novel insulin-loaded porous starch-alginate hydrogel systems (In-S-Alg) including In-MS-Alg (prepared with porous maize starch), In-WS-Alg (porous waxy maize starch), and In-RS-Alg (porous rice starch) were successfully developed. As a representative, In-MS-Alg was further coated with gelatinized-retrograded high amylose maize starch (HA) films with different thicknesses to prepare In-MS-HA/Alg hydrogel beads for improving the functionality of controlled release of insulin under the action of α-amylase. The In-S-Alg and In-MS-HA/Alg hydrogel beads were evaluated in terms of structural and morphological properties, encapsulation effect on insulin as well as its release behavior. The results show that insulin was distributed in the pores and cavities of porous starch granules. In In-MS-HA/Alg hydrogel beads, insulin was increasingly blocked inside porous starch with the increased thickness of the HA film. Encapsulation efficiency of insulin in all In-S-Alg and In-MS-HA/Alg hydrogel beads was >80%. Amazingly, both the hydrogel beads successfully achieved the goal of triggered release upon pH changes and α-amylase addition. Most of the insulin (about 90%) was retained in the simulated gastric fluid; while the release rate of insulin in the simulated intestinal fluid increased gradually, and was further accelerated in the presence of α-amylase. Furthermore, for the In-MS-HA/Alg hydrogel beads, the insulin release rate can be gradually reduced by increasing the thickness of the HA film, which provided the possibility to match the rate of increase of the blood glucose level after the intake of food with different glycemic indices. Therefore, the novel hydrogel prepared in this study may be a promising and safe delivery carrier for oral insulin.

Starch-based materials encapsulating food ingredients: Recent advances in fabrication methods and applications

Encapsulation systems have gained significant interest in designing innovative foods, as they allow for the protection and delivery of food ingredients that have health benefits but are unstable during processing, storage and in the upper gastrointestinal tract. Starch is widely available, cheap, biodegradable, edible, and easy to be modified, thus highly suitable for the development of encapsulants. Much efforts have been made to fabricate various types of porous starch and starch particles using different techniques (e.g. enzymatic hydrolysis, aggregation, emulsification, electrohydrodynamic process, supercritical fluid process, and post-processing drying). Such starch-based systems can load, protect, and deliver various food ingredients (e.g. fatty acids, phenolic compounds, carotenoids, flavors, essential oils, irons, vitamins, probiotics, bacteriocins, co-enzymes, and caffeine), exhibiting great potentials in developing foods with tailored flavor, nutrition, sensory properties, and shelf-life. This review surveys recent advances in different aspects of starch-based encapsulation systems including their forms, manufacturing techniques, and applications in foods.

Preparation of V-type porous starch by amylase hydrolysis of V-type granular starch in aqueous ethanol solution

In this paper, a novel porous starch with a V-type crystalline structure and high adsorption capacity was obtained by enzymatic hydrolysis of V-type granular starch (VGS) in an aqueous ethanol solution. The effects of different starch concentrations, reaction temperatures, and ethanol concentrations on the microstructure, crystal morphology, crystallinity and adsorption properties of VGS before and after enzymatic hydrolysis were studied, and native normal corn starch (NNCS) and A-type porous starch (APS) prepared by enzymatic hydrolysis of NNCS were used as controls. The results showed that compared with NNCS, VGS was easier to hydrolyze with a higher hydrolysis degree and the corresponding V-type porous starch (VPS) had more and larger pores and thus showed better adsorption performance than APS. Under the same enzymatic hydrolysis time, temperature and rotation speed, VPS prepared with a starch concentration of 20%, reaction temperature of 140 °C and ethanol concentration of 70% showed an irregular spongelike porous structure, highest V-type relative crystallinity of 25.09%, highest oil adsorption capacity of 241.70% and water adsorption capacity of 805.59%.

The addition of alpha amylase improves the quality of Chinese dried noodles

The effect of α-amylase on the quality attributes of Chinese dried noodles (CDN) was investigated. Adding α-amylase markedly decreased the cooking time and cooking loss of CDN at the level of 12.5 (mg/100 g flour). The elasticity of CDN was increased significantly (P < 0.05) after adding α-amylase. The firmness of noodles with 12.5 mg α-amylase per 100 g flour showed no obvious change compared to the control, whereas it decreased significantly (P < 0.05) when the amount of α-amylase increased to 25 (mg/100 g flour). In addition, the chewiness of CDN with 12.5 mg α-amylase per 100 g flour increased, while it showed a significant (P < 0.05) decreasing trend with further increased α-amylase levels. Starch structural and thermal properties were also changed by α-amylase, which showed increased relative crystallinity, swelling power, but decreased pasting property. The changed starch property restrained the cross-linking of gluten. The decrease in optimal cooking time and increase in elasticity of CDN were due to the increased swelling power and decreased peak time of the starch. In addition, the decreased setback of starch and protein cross-linking degree were responsible for the decreased firmness and chewiness of CDN with α-amylase ranging from 25 to 50 mg/100 g flour. Overall, α-amylase could be used as a functional additive to improve the quality of CDN when the amount was at 12.5 mg/100 g flour.

Insights into the microstructure and interconnectivity of porosity in porous starch by hyperpolarized 129Xe NMR

For the first time, hyperpolarized (HP) ¹²⁹Xe NMR measurements are utilized to explore porous structures of porous starch (PS) successfully. Some micropores resided inside the mesopore walls of PS were detected by variable temperature (VT) HP ¹²⁹Xe NMR, and the pore sizes of micropores were also estimated using the empirical relationship. Furthermore, the interconnectivity of pores was investigated in detail by two-dimensional (2D) exchange spectroscopy (EXSY). The exchange process of xenon from microporosity within pore walls to the free gas space was occurred at the mixing time of ≥12 ms at 173 K, which indicated the well interconnectivity between micropores and mesopores. This study not only exhibits a new approach for investigation of pores and hollows of PS, but also provides a better understanding of porous structures for rational design in adsorbing functional compounds.

Pre-treatment of granular rice starch to enhance branching enzyme catalysis

Effects of different pre-treatments of granular rice starch using ethanol (ET) and maltogenic α-amylase (MA), separately or combined sequentially ET→MA, were performed to enable efficient subsequent modification with branching enzyme (BE). The pre-treated samples were characterized with respect to morphology, molecular structure, physicochemical properties and the rate of digestion to amylolytic enzymes. MA produced pores and also eroded the granular surface whereas ET caused coapted granules, noticeable swelling but no pores. Crystallinity and enthalpy of gelatinization dramatically decreased with ET and ET→MA. Subsequent BE catalysis increased the specific surface area, crystallinity, α-1,6-glucosidic linkage ratio and enthalpy. BE catalyzed branching resulted in more intact granules, less swelling capacity, solubility and granular separation as compared to their control. These effects were related to reduced amylolytic susceptibility. Pre-treatment prior to BE catalysis offers an efficient alternative way to modify granular starch with different structure and properties depending on the pre-treatment protocol.

Modification methods toward the production of porous starch: a review

Starch is a complex carbohydrate formed by the repeating units of glucose structure connected by the alpha-glycosidic linkages. Starch is classified according to their derivatives such as cereals, legumes, tubers, palms, fruits, and stems. For decades, native starch has been widely utilized in various applications such as a thickener, stabilizer, binder, and coating agent. However, starches need to be modified to enhance their properties and to make them more functional in a wide range of applications. Porous starch is a modified starch product which has attracted interest of late. It consists of abundant pores that are distributed on the granule surface without compromising the integrity of its granular structure. Porous starch can be produced either by enzymatic, chemical, and physical methods or a combination thereof. The type of starch and selection of the modification method highly influence the formation of pore structure. By carefully choosing a suitable starch and modification method, the desired morphology of porous starch can be produced and applied accordingly for its intended application. Innovations and technologies related to starch modification methods have evolved over the years in terms of the structure, properties and modification effects of different starch varieties. Therefore, this article reviews recent modification methods in developing porous starch from various origins.

Effects of different carbohydrases on the physicochemical properties of rice flour, and the quality characteristics of fermented rice cake

The rice flours were hydrolyzed using α-amylase (A), α-amylase and xylanase (AX), and α-amylase, xylanase and β-amylase (AXB). The effects of different enzymatic rice flour hydrolysates (ERH) on the quality of the fermented rice cake (FRC) were determined at 25 °C for 4 days. ERH had higher porosity, water absorption index, water solubility index and lower viscosity than the control. Moisture content of FRC center decreased significantly after 4 days. Specific volumes of fresh A-, AX- and AXB-FRC were higher than the control. Color of fresh A-FRC was closer to that of the control. AXB-FRC had lower hardness and firming rate than other samples during storage. After 4 days of storage, FRC with ERH had lower endotherm enthalpy and more uniform and clearer pore structure than the control. Therefore, the ERH with single or mixed enzymes could improve the structure of FRC, and extend its shelf-life.

In-vitro and in-vivo evaluation of modified sodium starch glycolate for exploring its haemostatic potential

The control of blood flow from breached blood vessels during surgery or trauma is challenging. With the existing treatment options being either expensive or ineffective, the development of a haemostat that overcome such drawbacks would be beneficial. With an aim to develop an ideal haemostat, the potential of sodium starch glycolate (SSG), a commonly used pharmaceutical disintegrant was modified to obtain porous microparticles (pSSG). The biodegradability, cyto-compatibility and haemo-compatibility of the modified particles were confirmed using appropriate studies. In comparison to starch and SSG, the irregular shaped pSSG demonstrated spontaneous and significant fluid absorption (3500+500 %) and formed a physical barrier to blood flow. In addition, significant blood cells aggregation and platelet activation was observed in the modified micoparticles leading to rapid clot formation. In-vivo studies on liver and abdominal artery injury models in rats indicated the superior haemostatic potential of pSSG over SSG and starch. The results indicated that pSSG can be explored further in clinical evaluation as a hemostat.

Construction of octenyl succinic anhydride modified porous starch for improving bioaccessibility of β-carotene in emulsions

Modified porous starch (PS), by introducing octenyl succinic anhydride (OSA) moieties, was synthesized successfully, which was applied as an emulsion of β-carotene for the first time. The pores and channels within porous starch provided more possibilities for OSA to modify starch. The ester linkage of OSA modified PS with different degrees of substitution (DS) were confirmed by both ¹³C solid-state NMR and Fourier transform-infrared spectroscopy (FT-IR). The hydrophobic octenyl succinic and hydrophilic hydroxyl groups of OSA modified PS showed the good emulsifying capability, which could be utilized to prepare β-carotene emulsions. And the bioaccessibility of β-carotene was also enhanced with increasing DS of OSA modified starch. This study not only paves a new way using porous starches for modification of starch, but also offers an attractive alternative for obtaining emulsion-based delivery systems for bioactive components.

The synthesis and application of OSA modified porous starch.

Biocatalytic Fabrication of α-Glucan-Coated Porous Starch Granules by Amylolytic and Glucan-Synthesizing Enzymes as a Target-Specific Delivery Carrier

In this study, we created biocatalytically coated porous starch granules (PSGs) using amylosucrase from Neisseria polysaccharea to apply them as an encapsulant for target-specific delivery. Field-emission scanning electron and confocal laser scanning microscopic images showed that the PSGs were completely concealed by the α-glucan coating layer. This carbohydrate-based encapsulant displayed higher amount of resistant glucan contents due to the elongated chains of the glucan coating, resulting in lower digestibility of these PSGs in simulated digestive fluid systems. Among the various PSGs evaluated, the highest loading efficiency for the bioactive molecule crocin was observed with the β-amylase-induced PSGs (β-PSGs) that had the smallest nanosize pores. Furthermore, α-glucan-coated β-PSGs showed the highest capacity to preserve the loaded crocin when incubated in simulated digestive fluids. This suggests that the α-glucan-coated β-PSGs can potentially be used for the delayed release of the core material in the upper region of the gastrointestinal tract. Therefore, this system can be potentially utilized as an effective carrier for colon-specific delivery, and the release of the bioactive compound can be triggered by beneficial intestinal microbiota.