Surface-enhanced Raman scattering on colloidal nanostructures

Antisolvent precipitation technique: A very promising approach to crystallize curcumin in presence of polyvinyl pyrrolidon for solubility and dissolution enhancement

Curcumin with a vast number of pharmacological activities is a poorly water soluble drug which its oral bioavailability is profoundly limited by its dissolution or solubility in GI tract. Curcumin could be a good anticancer drug if its solubility could be increased. Therefore, the aim of the present study was to increase the dissolution rate of curcumin by employing antisolvent crystallization technique and to investigate the effect of polyvinyl pyrrolidone K30 (PVP) as colloidal particles in crystallization medium on resultant particles. Curcumin was crystalized in the presence of different amounts of PVP by antisolvent crystallization method and their physical mixtures were prepared for comparison purposes. The samples were characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), X-ray powder diffraction (XRPD) and Fourier transform infrared spectroscopy (FT-IR). The solubility and dissolution of the treated and untreated curcumin were also determined. Antisolvent crystallization of curcumin led to the formation of particles with no definite geometric shape. It was interesting to note that the DSC and XRPD studies indicated the formation of a new polymorph and less crystallinity for particles crystallized in the absence of PVP. However, the crystallized curcumin in the presence of PVP was completely amorphous. All crystalized curcumin samples showed much higher dissolution rate compared to untreated curcumin. The amount of curcumin dissolved within 10 for treated curcumin in the presence of PVP (1:1 curcumin:PVP) was 7 times higher than untreated curcumin and this enhancement in the dissolution for curcumin samples crystallized in the absence of PVP was around 5 times. Overall' the results of this study showed that antisolvent crystallization method in the absence or presence of small amounts of PVP is very efficient in increasing the dissolution rate of curcumin to achieve better efficiency for curcumin.

Ultrafast and nonlinear surface-enhanced Raman spectroscopy

Ultrafast surface-enhanced Raman spectroscopy (SERS) has the potential to study molecular dynamics near plasmonic surfaces to better understand plasmon-mediated chemical reactions such as plasmonically-enhanced photocatalytic or photovoltaic processes. This review discusses the combination of ultrafast Raman spectroscopic techniques with plasmonic substrates for high temporal resolution, high sensitivity, and high spatial resolution vibrational spectroscopy. First, we introduce background information relevant to ultrafast SERS: the mechanisms of surface enhancement in Raman scattering, the characterization of plasmonic materials with ultrafast techniques, and early complementary techniques to study molecule-plasmon interactions. We then discuss recent advances in surface-enhanced Raman spectroscopies with ultrafast pulses with a focus on the study of molecule-plasmon coupling and molecular dynamics with high sensitivity. We also highlight the challenges faced by this field by the potential damage caused by concentrated, highly energetic pulsed fields in plasmonic hotspots, and finally the potential for future ultrafast SERS studies.

Diethyldithiocarbamate (DDTC) induced formation of positively charged silver nanoparticles for rapid in situ identification of inorganic explosives by surface enhanced Raman spectroscopy

Diethyldithiocarbamate could induce the generation of positively charged silver nanoparticles for rapidin situdetection of the explosives with a portable Raman spectrometer.

Catalytic effects of silver plasmonic nanoparticles on the redox reaction leading to ABTS˙+formation studied using UV-visible and Raman spectroscopy

The strong effect of silver plasmonic nanoparticles on ABTS leading to the formation of ABTS radical cation is investigated by UV-visible, Raman and SERS spectroscopy.

Qualitative analysis of some alkanethiols on Au nanoparticles during SERS

The surface enhanced Raman spectroscopy enhancement factors (SERS EFs) for different AuNP–surfactant systems are measured and the observed trend is theoretically and qualitatively investigated.

Comparison of the in Vitro Uptake and Toxicity of Collagen- and Synthetic Polymer-Coated Gold Nanoparticles

We studied the physico-chemical properties (size, shape, zeta-potential), cellular internalization and toxicity of gold nanoparticles (NPs) stabilized with the most abundant mammalian protein, collagen. The properties of these gold NPs were compared to the same sized gold NPs coated with synthetic poly(isobutylene-alt-maleic anhydride) (PMA). Intracellular uptake and cytotoxicity were assessed in two cell lines (cervical carcinoma and lung adenocarcinoma cells) by employing inductively-coupled plasma-mass spectrometry (ICP-MS) analysis and a cell viability assay based on 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT), respectively. We found that the collagen-coated gold NPs exhibit lower cytotoxicity, but higher uptake levels than PMA-coated gold NPs. These results demonstrate that the surface coating of Au NPs plays a decisive role in their biocompatibility.

A simple approach for ultrasensitive detection of bisphenols by multiplexed surface-enhanced Raman scattering

Bisphenol A (BPA) is well known for its use in plastic manufacture and thermal paper production despite its risk of health toxicity as an endocrine disruptor in humans. Since the publication of new legislation regarding the use of BPA, manufacturers have begun to replace BPA with other phenolic molecules such as bisphenol F (BPF) and bisphenol B (BPB), but there are no guarantees regarding the health safety of these compounds at this time. In this context, a very simple, cheap and fast surface-enhanced Raman scattering (SERS) method was developed for the sensitive detection of these molecules in spiked tap water solutions. Silver nanoparticles were used as SERS substrates. An original strategy was employed to circumvent the issue of the affinity of bisphenols for metallic surfaces and the silver nanoparticles surface was functionalized using pyridine in order to improve again the sensitivity of the detection. Semi-quantitative detections were performed in tap water solutions at a concentrations range from 0.25 to 20 μg L(-1) for BPA and BPB and from 5 to 100 μg L(-1) for BPF. Moreover, a feasibility study for performing a multiplex-SERS detection of these molecules was also performed before successfully implementing the developed SERS method on real samples.

Phage-AgNPs complex as SERS probe for U937 cell identification

The early diagnosis of malignancy is the most critical factor for patient survival and the treatment of cancer. In particular, leukemic cells are highly heterogeneous, and there is a need to develop new rapid and accurate detection systems for early diagnosis and monitoring of minimal residual disease. This study reports the utilization of molecular networks consisting of entire bacteriophage structure, displaying specific peptides, directly assembled with silver nanoparticles as a new Surface Enhanced Raman Spectroscopy (SERS) probe for U937 cells identification in vitro. A 9-mer pVIII M13 phage display library is screened against U937 to identify peptides that selectively recognize these cells. Then, phage clone is assembled with silver nanoparticles and the resulting network is used to obtain a SERS signal on cell-type specific molecular targets. The proposed strategy could be a very sensitive tool for the design of biosensors for highly specific and selective identification of hematological cancer cells and for detection of minimal residual disease in a significant proportion of human blood malignancy.

Hybrid nanostructures for SERS: materials development and chemical detection

This review focuses on recent developments in hybrid and nanostructured substrates for SERS (surface-enhanced Raman scattering) studies. Thus substrates composed of at least two distinct types of materials, in which one is a SERS active metal, are considered here aiming at their use as platforms for chemical detection in a variety of contexts. Fundamental aspects related to the SERS effect and plasmonic behaviour of nanometals are briefly introduced. The materials described include polymer nanocomposites containing metal nanoparticles and coupled inorganic nanophases. Chemical approaches to tailor the morphological features of these substrates in order to get high SERS activity are reviewed. Finally, some perspectives for practical applications in the context of chemical detection of analytes using such hybrid platforms are presented.

Analytical characterization using surface-enhanced Raman scattering (SERS) and microfluidic sampling

With the rapid development of analytical techniques, it has become much easier to detect chemical and biological analytes, even at very low detection limits. In recent years, techniques based on vibrational spectroscopy, such as surface enhanced Raman spectroscopy (SERS), have been developed for non-destructive detection of pathogenic microorganisms. SERS is a highly sensitive analytical tool that can be used to characterize chemical and biological analytes interacting with SERS-active substrates. However, it has always been a challenge to obtain consistent and reproducible SERS spectroscopic results at complicated experimental conditions. Microfluidics, a tool for highly precise manipulation of small volume liquid samples, can be used to overcome the major drawbacks of SERS-based techniques. High reproducibility of SERS measurement could be obtained in continuous flow generated inside microfluidic devices. This article provides a thorough review of the principles, concepts and methods of SERS-microfluidic platforms, and the applications of such platforms in trace analysis of chemical and biological analytes.

Tailored surface-enhanced Raman nanopillar arrays fabricated by laser-assisted replication for biomolecular detection using organic semiconductor lasers

Organic semiconductor distributed feedback (DFB) lasers are of interest as external or chip-integrated excitation sources in the visible spectral range for miniaturized Raman-on-chip biomolecular detection systems. However, the inherently limited excitation power of such lasers as well as oftentimes low analyte concentrations requires efficient Raman detection schemes. We present an approach using surface-enhanced Raman scattering (SERS) substrates, which has the potential to significantly improve the sensitivity of on-chip Raman detection systems. Instead of lithographically fabricated Au/Ag-coated periodic nanostructures on Si/SiO2 wafers, which can provide large SERS enhancements but are expensive and time-consuming to fabricate, we use low-cost and large-area SERS substrates made via laser-assisted nanoreplication. These substrates comprise gold-coated cyclic olefin copolymer (COC) nanopillar arrays, which show an estimated SERS enhancement factor of up to ∼ 10(7). The effect of the nanopillar diameter (60-260 nm) and interpillar spacing (10-190 nm) on the local electromagnetic field enhancement is studied by finite-difference-time-domain (FDTD) modeling. The favorable SERS detection capability of this setup is verified by using rhodamine 6G and adenosine as analytes and an organic semiconductor DFB laser with an emission wavelength of 631.4 nm as the external fiber-coupled excitation source.

A Au nanoparticle-incorporated sponge as a versatile transmission surface-enhanced Raman scattering substrate

We report a sponge-based transmission surface-enhanced Raman scattering (TSERS) substrate that combines the bulk sampling capabilities of a transmission measurement to improve the quantitative representation of sample concentration with several sponge properties useful for analysis such as fast sample uptake, easy sample enrichment, and a stable polymeric structure.

Ag@Au core-shell nanoparticles synthesized by pulsed laser ablation in water: Effect of plasmon coupling and their SERS performance

Ag@Au core-shell nanoparticles are synthesised by pulsed laser ablation in water using low energy laser pulses. The plasmon characteristics of these core-shell nanoparticles are found to be highly sensitive to the thickness of Au coating. In the synthesis, at first silver nanocolloid was prepared by ablating Ag target and then it is followed by ablation of Au target for different time durations to form Ag@Au core-shell nanostructures. The effect of plasmon-plasmon coupling on the absorption spectra is investigated by decreasing the effective distance between the nanoparticles. This is achieved by reducing the total volume of the colloidal suspension by simple evaporation of water, the solvent used. The suitability of these core-shell nanostructures for application as surface enhanced Raman scattering substrates are tested with crystal violet as probe molecules. Influence of plasmon coupling on the enhancement of Raman bands is found to be different for different bands.

Critical assessment of enhancement factor measurements in surface-enhanced Raman scattering on different substrates

The SERS enhancement factor (SERS-EF) is one of the most important parameters that characterizes the ability of a given substrate to enhance the Raman signal for SERS applications. The comparison between dynamic and static substrates, however, should not be performed in sense of SERS-EF.

Silver@graphene oxide nanocomposite-based optical sensor platform for biomolecules

A silver incorporated graphene oxide nanocomposite was prepared and used for the detection of biomolecules using an absorbance based optical sensing method.

Temperature controlled fluorescence on Au@Ag@PNIPAM-PTEBS microgels: effect of the metal core size on the MEF extension

In this work, we present a novel method to produce thermoresponsive, monodisperse microgels which display temperature-dependent photoluminescence. The system is based on bimetallic cores of Au@Ag encapsulated within thermoresponsive poly(N-isopropylacrylamide) microgels and coated with a photoluminescent polymer (poly[2-(3-thienyl)ethoxy-4-butylsulfonate] (PTEBS) using the Layer-by-Layer technique. The electromagnetic radiation used to excite the PTEBS induces a local electromagnetic field on the surface of the bimetallic cores that enhances the excitation and emission rates of the PTEBS, yielding a metal enhanced fluorescence (MEF). This effect was studied as a function of the bimetallic core size and the separation distance between the PTEBS and the bimetallic cores. Our results permit evaluation of the effect that the metallic core size of colloidal particles exerts on the MEF for the first time, and prove the relevance of the metallic cores to extend the effect far away from the metallic surface.

Sensitive surface-enhanced Raman spectroscopy (SERS) detection of organochlorine pesticides by alkyl dithiol-functionalized metal nanoparticles-induced plasmonic hot spots

In this work, we report the detection of the organochlorine pesticides aldrin, dieldrin, lindane, and α-endosulfan by using surface-enhanced Raman spectroscopy (SERS) and optimization of the SERS-sensing substrate. In order to overcome the inherent problem of the low affinity of the above pesticides, we have developed a strategy consisting of functionalization of the metal surface with alkyl dithiols in order to achieve two different goals: (i) to induce the nanoparticle linkage and create interparticle junctions where sensitive hot spots needed for SERS enhancement are present, and (ii) to create a specific environment in the nanogaps between silver and gold nanoparticles, making them suitable for the assembly and SERS detection of the analyzed pesticides. Afterward, an optimization of the sensing substrate was performed by varying the experimental conditions: type of metal nanoparticles, molecular linker (aromatic versus aliphatic dithiols and the length of the intermediate chain), surface coverage, laser excitation wavelength. From the adsorption isotherms, it was possible to deduce the corresponding adsorption constant and the limit of detection. The present results confirm the high sensitivity of SERS for the detection of the organochlorine pesticides with a limit of detection reaching 10(-8) M, thus providing a solid basis for the construction of suitable nanosensors for the identification and quantitative analysis of this type of chemical.

Nanonization of curcumin by antisolvent precipitation: process development, characterization, freeze drying and stability performance

The present work aims to investigate applicability of antisolvent precipitation method for preparation of nanosized curcumin and to control their characteristics by determining the influence of process and solvents on solid-state properties of curcumin nanoparticles. Effects of different experimental parameters on particle size were investigated using dynamic light scattering. Particle morphology was studied using SEM. Drug content in stabilized nanoparticles was determined using HPLC. Residual moisture content after lyophilisation was determined using Karl Fischer method and solid state properties were investigated using DSC, TGA, FTIR and powder-XRD. The resulting product showed a high drug load and contained the drug in amorphous form. The particle diameters of prepared curcumin nanoparticles were found in the range of 100-200 nm. In vitro drug release studies indicated a sustained release profile of curcumin from the nanoparticles. Antisolvent precipitation produced amorphous curcumin nanoparticles whose size and morphology could be controlled using gelatine as stabilizer. Lyophilized curcumin nanoparticles with d-sorbitol as lyoprotectant possessed good redispersibility and showed up to 4 times faster in vitro curcumin release rate than that of unprocessed curcumin. Stability tests (at 2-8°C and ambient conditions) indicated that the product was stable for up to 6 months of storage.

Use of graphene and gold nanorods as substrates for the detection of pesticides by surface enhanced Raman spectroscopy

This study aimed to use gold nanorods and graphene as key materials to fabricate high-performance substrates for the detection of pesticides by surface enhanced Raman spectroscopy (SERS). Three types of pesticides (azinphos-methyl, carbaryl, and phosmet) were selected. Gold nanorods have great potential to be used as a SERS substrate because it is easy to tune the surface plasmon resonance of the nanorods to the laser excitation wavelength of Raman spectroscopy. Graphene is a promising nanoscale material that can be used for supporting metal nanostructures. Three types of novel SERS substrates were fabricated, including graphene-gold film-gold nanorod (G-Au-AuNR) substrate, gold film-gold nanorod (Au-AuNR) substrate, and graphene coupled with gold nanorods (G-AuNR). The results demonstrate that G-Au-AuNR substrates exhibited the strongest Raman signals of the selected pesticides, followed by the Au-AuNR substrates. G-AuNR exhibited the weakest Raman signals, and no characteristic spectral features of the analytes were obtained. A partial least-squares method was used to develop quantitative models for the analysis of spectral data (R = 0.94, 0.87, and 0.86 for azinphos-methyl, carbaryl, and phosmet, respectively). The G-Au-AuNRs substrate was able to detect all three types of pesticides at the parts per million level with limits of detection at around 5, 5, and 9 ppm for azinphos-methyl, carbaryl, and phosmet, respectively. These results indicate that combining gold nanorods and graphene has great potential in the fabrication of sensitive, lightweight, and flexible substrates for SERS applications to improve food safety.

Green synthesis and characterization of silver nanoparticles using alcoholic flower extract of Nyctanthes arbortristis and in vitro investigation of their antibacterial and cytotoxic activities

Here we report the synthesis of silver nanoparticles using ethanolic flower extract of Nyctanthes arbortristis, UVvisible spectra and TEM indicated the successful formation of silver nanoparticles. Crystalline nature of the silver nanoparticles was confirmed by X-ray diffraction. Fourier Transform Infra-Red Spectroscopy analysis established the capping of the synthesized silver nanoparticles with phytochemicals naturally occurring in the ethanolic flower extract of N. arbortristis. The synthesized silver nanoparticles showed antibacterial activity against the pathogenic strain of Escherichia coli MTCC 443. Furthermore, cytotoxicity of the silver nanoparticles was tested on mouse fibroblastic cell line (L929) and found to be non-toxic, which thus proved their biocompatibility. Antibacterial activity and cytotoxicity assay carried out in this study open up an important perspective of the synthesized silver nanoparticles.

Relating surface-enhanced Raman scattering signals of cells to gold nanoparticle aggregation as determined by LA-ICP-MS micromapping

The cellular response to nanoparticle exposure is essential in various contexts, especially in nanotoxicity and nanomedicine. Here, 14-nm gold nanoparticles in 3T3 fibroblast cells are investigated in a series of pulse-chase experiments with a 30-min incubation pulse and chase times ranging from 15 min to 48 h. The gold nanoparticles and their aggregates are quantified inside the cellular ultrastructure by laser ablation inductively coupled plasma mass spectrometry micromapping and evaluated regarding the surface-enhanced Raman scattering (SERS) signals. In this way, both information about their localization at the micrometre scale and their molecular nanoenvironment, respectively, is obtained and can be related. Thus, the nanoparticle pathway from endocytotic uptake, intracellular processing, to cell division can be followed. It is shown that the ability of the intracellular nanoparticles and their accumulations and aggregates to support high SERS signals is neither directly related to nanoparticle amount nor to high local nanoparticle densities. The SERS data indicate that aggregate geometry and interparticle distances in the cell must change in the course of endosomal maturation and play a critical role for a specific gold nanoparticle type in order to act as efficient SERS nanoprobe. This finding is supported by TEM images, showing only a minor portion of aggregates that present small interparticle spacing. The SERS spectra obtained after different chase times show a changing composition and/or structure of the biomolecule corona of the gold nanoparticles as a consequence of endosomal processing.

Resonant secondary light emission from plasmonic Au nanostructures at high electron temperatures created by pulsed-laser excitation

Plasmonic nanostructures are of great current interest as chemical sensors, in vivo imaging agents, and for photothermal therapeutics. We study continuous-wave (cw) and pulsed-laser excitation of aqueous suspensions of Au nanorods as a model system for secondary light emission from plasmonic nanostructures. Resonant secondary emission contributes significantly to the background commonly observed in surface-enhanced Raman scattering and to the light emission generated by pulsed-laser excitation of metallic nanostructures that is often attributed to two-photon luminescence. Spectra collected using cw laser excitation at 488 nm show an enhancement of the broad spectrum of emission at the electromagnetic plasmon resonance of the nanorods. The intensity of anti-Stokes emission collected using cw laser excitation at 785 nm is described by a 300 K thermal distribution of excitations. Excitation by subpicosecond laser pulses at 785 nm broadens and increases the intensity of the anti-Stokes emission in a manner that is consistent with electronic Raman scattering by a high-temperature distribution of electronic excitations predicted by a two-temperature model. Broadening of the pulse duration using an etalon reduces the intensity of anti-Stokes emission in quantitative agreement with the model. Experiments using a pair of subpicosecond optical pulses separated by a variable delay show that the timescale of resonant secondary emission is comparable to the timescale for equilibration of electrons and phonons.

Specific biomolecule corona is associated with ring-shaped organization of silver nanoparticles in cells

We correlate the localization of silver nanoparticles inside cells with respect to the cellular architecture with the molecular information in the vicinity of the particle surface by combining nanoscale 3D cryo-soft X-ray tomography (cryo-SXT) with surface-enhanced Raman scattering (SERS). The interaction of the silver nanoparticle surface with small molecules and biopolymers was monitored by SERS in vitro over time in living cells. The spectra indicate a stable, time-independent surface composition of silver nanoparticles, despite the changing environment in the endosomal structure. Cryo-SXT reveals a characteristic ring-shaped organization of the silver nanoparticles in endosomes of different cell types. The ring-like structures inside the endosomes suggest a strong association among silver particles and with membrane structures. The comparison of the data with those obtained with gold nanoparticles suggests that the interactions between the nanoparticles and with the endosomal component are influenced by the molecular composition of the corona.

Detection of tobacco-related biomarkers in urine samples by surface-enhanced Raman spectroscopy coupled with thin-layer chromatography

The nicotine metabolites, cotinine and trans-3'-hydroxycotinine (3HC) are considered as superior biomarkers for identifying tobacco exposure. More importantly, the ratio of 3HC to cotinine is a good indicator to phenotype individuals for cytochrome P450 2A6 activity and to individualize pharmacotherapy for tobacco addiction. In this paper, a simple, robust and novel method based on surface-enhanced Raman spectroscopy coupled with thin-layer chromatography (TLC) was developed to directly quantify the biomarkers in human urine samples. This is the first time surface-enhanced Raman spectroscopy (SERS) was used to detect cotinine and 3HC in urine samples. The linear dynamic range for the detection of cotinine is from 40 nM to 8 μM while that of 3HC is from 1 μM to 15 μM. The detection limits are 10 nM and 0.2 μM for cotinine and 3HC, respectively. The proposed method was further validated by quantifying the concentration of both cotinine and 3HC in smokers' urine samples. This TLC-SERS method allows the direct detection of cotinine in the urine samples of both active and passive smokers and the detection of 3HC in smokers.

Analysis of protein acetyltransferase structure-function relation by surface-enhanced raman scattering (SERS): a tool to screen and characterize small molecule modulators

Among the different posttranslational modifications (PTMs) that significantly regulate the protein function, lysine acetylation has become the major focus, especially to understand the epigenetic role of the acetyltransferases, in cellular physiology. Furthermore, dysfunction of these acetyltransferases is well documented under pathophysiological conditions. Therefore, it is important to understand the dynamic structure-function relationship of acetyltransferases in a relatively less complicated and faster method, which could be efficiently exploited to design and synthesis of small molecule modulators (activators/inhibitors) of these enzymes for in vivo functional analysis and therapeutic purposes. We have developed surface-enhanced Raman scattering (SERS) method, for acetyltransferases towards this goal. By employing SERS, we have not only demonstrated the autoacetylation induced structural changes of p300 enzyme but also could use this technique to characterize and design potent, specific inhibitors as well as activators of the p300. In this chapter we shall describe the methods in detail which could be highly useful for other classes of HATs and PTM enzymes.

Surface-Enhanced Raman Scattering: A Technique of Choice for Molecular Detection

Although surface-enhanced Raman scattering (SERS) has crossed its infancy long ago, it is yet to persuade different challenges to make it available in day-to-day applications. SERS is being criticized mainly due to the quality of the SERS analyses that uses substrates to get the giant enhancement for respective Raman signal of the target molecule. Hence, understanding the phenomena behind substrates, cost-effective development and optimization of such substrates for routine analytical purposes and utilization of modern modalities to get the insights out has become a very wide-spreading and interesting area of research. In this piece of work, several key terminologies related to SERS have been presented in brief. Since SERS is a localized surface plasmon resonance (LSPR) mediated signal-enhancing phenomena, it is indispensable to understand the correlation between LSPR excitations originated from substrate and SERS signal originated from molecules. A wide range of SERS-active substrates including scattered nanoaggregates, anisotropic assembly, two-dimensional nanostructure, multi-layered nanostructure of gold nanoparticles and colloidal approach have been used to interpret such correlation between LSPR excitations and SERS characteristics. Few exemplary applications of SERS have been also mentioned followed by typical simulative work how nanoobject behaves at different excitations and polarizations.

SERS investigations of 2,3-dibromo-1,4-naphthoquinone on silver nanoparticles

In the present study silver nanoparticles were synthesized using a solution combustion method with glycine as fuel. The prepared silver nanoparticles show an fcc crystalline structure with a particle size of 39 nm. Surface-enhanced Raman scattering (SERS) spectra of 2,3-dibromo-1,4-naphthoquinone (DBNQ) adsorbed on silver nanoparticles were investigated. The C-C stretching modes were enhanced and they were broaden in SERS spectrum with respect to normal Raman spectrum. The spectral analysis reveals that the DBNQ adsorbed flat-on orientation on the silver surface. DFT calculations are also performed to study the vibrational features of DBNQ.

Surface-enhanced Raman spectroscopy at single-molecule scale and its implications in biology

Single-molecule (SM) spectroscopy has been an exciting area of research offering significant promise and hope in the field of sensor development to detect targets at ultra-low levels down to SM resolution. To the experts and developers in the field of surface-enhanced Raman spectroscopy (SERS), this has often been a challenge and a significant opportunity for exploration. Needless to say, the opportunities and excitement of this multidisciplinary area impacts span the fields of physics, chemistry and engineering, along with a significant thrust in applications constituting areas in medicine, biology, environment and agriculture among others. In this review, we will attempt to provide a quick snapshot of the basics of SM-SERS, nanostructures and devices that can enable SM Raman measurement. We will conclude with a discussion on SERS implications in biomedical sciences.

Study of non-covalent interaction between a designed monoporphyrin and fullerenes (C60 and C70) in absence and presence of silver nanoparticles

The present article reports on supramolecular interaction between fullerenes (C(60) and C(70)) and a designed monoporphyrin, e.g., 5,15-di(para-methoxyphenyl)zincporphyrin (1), in absence and presence of silver nanoparticles (AgNp) having diameter of ~3-7 nm in toluene. While UV-Vis studies establish the ground state electronic interaction between fullerenes and 1 in absence and presence of AgNp, steady state fluorescence experiment enables us to determine the value of binding constant (K) for the fullerene-1 complexes in solution. Steady state fluorescence measurement reveals that reduction in the K value takes place for both C(60)-1 (K=1560 dm(3) mol(-1)) and C(70)-1 systems (K=14,970 dm(3) mol(-1)) in presence of AgNp, i.e., K C(60)(-1)=1445 dm(3) mol(-1) and Kc(60-)(1)=14,550 dm(3) mol(-1). SEM measurements establish formation of surface holes in fullerene-1-AgNp structure. Both SEM and dynamic light scattering measurement demonstrates that the electrostatic attraction between porphyrin-based supramolecules and AgNp is very much responsible behind the formation of larger aggregates. Quantum chemical calculations evoke the single projection geometric structures of the fullerene-1 complexes in vacuo and well interpret the alignment of the C(60) and C(70) molecule with the flat -belt region of 1.

Spectroscopic investigation of oxygen- and water-induced electron trapping and charge transport instabilities in n-type polymer semiconductors

We present an optical spectroscopy study on the role of oxygen and water in electron trapping and storage/bias-stress degradation of n-type polymer field-effect transistors based on one of the most widely studied electron transporting conjugated polymers, poly{[N,N9-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,59-(2,29-bisthiophene)} (P(NDI2OD-T2)). We combine results obtained from charge accumulation spectroscopy, which allow optical quantification of the concentration of mobile and trapped charges in the polymer film, with electrical characterization of P(NDI2OD-T2) organic field-effect transistors to study the mechanism for storage and bias-stress degradation upon exposure to dry air/oxygen and humid nitrogen/water environments, thus separating the effect of the two molecules and determining the nature of their interaction with the polymer. We find that the stability upon oxygen exposure is limited by an interaction between the neutral polymer and molecular oxygen leading to a reduction in electron mobility in the bulk of the semiconductor. We use density functional theory quantum chemical calculations to ascribe the drop in mobility to the formation of a shallow, localized, oxygen-induced trap level, 0.34 eV below the delocalized lowest unoccupied molecular orbital of P(NDI2OD-T2). In contrast, the stability of the polymer anion against water is limited by two competing reactions, one involving the electrochemical oxidation of the polymer anion by water without degradation of the polymer and the other involving a radical anion-catalyzed chemical reaction of the polymer with water, in which the electron can be recycled and lead to further degradation reactions, such that a significant portion of the film is degraded after prolonged bias stressing. Using Raman spectroscopy, we have been able to ascribe this to a chemical interaction of water with the naphthalene diimide unit of the polymer. The degradation mechanisms identified here should be considered to explain electron trapping in other rylene diimides and possibly in other classes of conjugated polymers as well.

Adsorption and detection of sport doping drugs on metallic plasmonic nanoparticles of different morphology

A comparative study of different plasmonic nanoparticles with different morphologies (nanospheres and triangular nanoprisms) and metals (Ag and Au) was done in this work and applied to the ultrasensitive detection of aminoglutethimide (AGI) drug by surface enhanced Raman spectroscopy (SERS) and plasmon resonance. AGI is an aromatase inhibitor used as an antitumoral drug with remarkable pharmacological interest and also in illegal sport doping. The application of very sensitive spectroscopic techniques based on the localization of an electromagnetic field on plasmonic nanoparticles confirms the previous study of the adsorption of drugs onto a metal surface due to the near field character of these techniques. The adsorption of AGI on the above substrates was investigated at different pH values and surface coverages, and the results were analyzed on the basis of AGI/metal affinity, considering the interaction mechanism, the existence of two binding sites in AGI, and the influence of the interface on the adsorption in terms of surface charge due to the presence of other ions linked to the surface. Finally, a comparative quantitative detection of AGI was performed on both spherical and triangular nanoprism nanoparticles, and a limit of detection lower than those reported so far was deduced on the latter nanoparticles.

Invited review article: combining scanning probe microscopy with optical spectroscopy for applications in biology and materials science

This is a comprehensive review of the combination of scanning probe microscopy (SPM) with various optical spectroscopies, with a particular focus on Raman spectroscopy. Efforts to combine SPM with optical spectroscopy will be described, and the technical difficulties encountered will be examined. These efforts have so far focused mainly on the development of tip-enhanced Raman spectroscopy, a powerful technique to detect and image chemical signatures with single molecule sensitivity, which will be reviewed. Beyond tip-enhanced Raman spectroscopy and/or topography measurements, combinations of SPM with optical spectroscopy have a great potential in the characterization of structure and quantitative measurements of physical properties, such as mechanical, optical, or electrical properties, in delicate biological samples and nanomaterials. The different approaches to improve the spatial resolution, the chemical sensitivity, and the accuracy of physical properties measurements will be discussed. Applications of such combinations for the characterization of structure, defects, and physical properties in biology and materials science will be reviewed. Due to the versatility of SPM probes for the manipulation and characterization of small and/or delicate samples, this review will mainly focus on the apertureless techniques based on SPM probes.

Physicochemical insights in supramolecular interaction of fullerenes C60 and C70 with a monoporphyrin in presence of silver nanoparticles

The present article reports for the first time on supramolecular interaction between fullerenes (C60 and C70) and a designed monoporphyrin in solution, e.g., 5,10,15,20-tetrakis(4-methoxyphenyl)-21H,23H-porphine (1), in absence and presence of silver nanoparticles (AgNp) having varying diameter of range between 3 and 7 nm. Ground state electronic interaction between fullerenes and 1 has been evidenced from the observation of decrease in the intensity of the Soret absorption band of 1 after complexation with C60 and C70 in toluene. However, in presence of AgNp, extent of decrease in the intensity of Soret absorption band of 1 has been reduced following its complexation with fullerenes. Steady state fluorescence measurements establish quenching of fluorescence of 1 by fullerenes and the most interesting aspect of the present work is that quenching efficiencies of C60 and C70 are found to be less in presence of AgNp. Steady state fluorescence measurement reveals reduction in the binding constant (K) value for both C60-1 (KC60-1=2355 dm3 mol(-1) and C70-1 complex (KC70-1=11,980 dm3 mol(-1)) in presence of AgNp (KC60-1=340 and KC70-1=7380 dm3 mol(-1)). The new physical insight of the present studies is that 1 acts as excellent discriminator molecule for C70 in presence of AgNp as selectivity in binding is estimated to be ∼21.7 in presence of AgNp compared to the situation when fullerene-1 mixture does not contain any AgNp (i.e., selectivity in binding=∼5.0) in solution. Time-resolved fluorescence studies establish the role of static quenching mechanism behind fluorescence decay of 1 by fullerenes in absence and presence of AgNp. Magnitude of rate constant for charge separation and quantum yield of charge separation indicates that C70-1 complex exhibits highest value of such parameters in absence of AgNp compared to the situation when AgNp particles are present in the composite mixture of C70 and 1. Dynamic light scattering (DLS) measurement reveals while particle size of AgNp is estimated to be ∼4.8-5.0 nm in presence of 1, the size of the AgNp particles in 1 become larger in presence of C60 (∼13.0 nm) and C70 (∼37.0 nm) solution in toluene. Conductance measurement establishes that AgNp particles reduce the generation of electrical conductivity value for both C60-1 and C70-1 systems in toluene with respect to time; the rate of decrease of electrical conductivity become much slower in presence of C70-1 complex. Scanning electron microscopic experiment provides excellent support for DLS measurements regarding increase in the size of the nanoparticles in presence of C60 and C70. Transmission electron microscope clearly demonstrates that the electrostatic attraction between porphyrin-based supramolecules and silver nanoparticles is very much responsible behind the formation of larger aggregates. Semiempirical PM3 calculations in vacuo establish the single projection structures for the fullerene-1 complexes and well interpret the stability difference between C60- and C70-complexes of 1 in terms of heat of formation values of the respective complexes.