Mitochondrial Targeted Thermosensitive Nanocarrier for Near-Infrared-Triggered Precise Synergetic Photothermal Nitric Oxide Chemotherapy

Nitric oxide (NO) intervenes, that is, a potential treatment strategy, and has attracted wide attention in the field of tumor therapy. However, the therapeutic effect of NO is still poor, due to its short half-life and instability. Therapeutic concentration ranges of NO should be delivered to the target tissue sites, cell, and even subcellular organelles and to control NO generation. Mitochondria have been considered a major target in cancer therapy for their essential roles in cancer cell metabolism and apoptosis. In this study, mesoporous silicon-coated gold nanorods encapsulated with a mitochondria targeted and the thermosensitive lipid layer (AuNR@MSN-lipid-DOX) served as the carrier to load NO prodrug (BNN6) to build the near-infrared-triggered synergetic photothermal NO-chemotherapy platform (AuNR@MSN(BNN6)-lipid-DOX). The core of AuNR@MSN exhibited excellent photothermal conversion capability and high loading efficiency in terms of BNN6, reaching a high value of 220 mg/g (w/w), which achieved near-infrared-triggered precise release of NO. The outer biocompatible lipid layer, comprising thermosensitive phospholipid DPPC and mitochondrial-targeted DSPE-PEG2000-DOX, guided the whole nanoparticle to the mitochondria of 4T1 cells observed through confocal microscopy. In the mitochondria, the nanoparticles increased the local temperature over 42 °C under NIR irradiation, and a high NO concentration from BNN6 detected by the NO probe and DSPE-PEG2000-DOX significantly inhibited 4T1 cancer cells in vitro and in vivo under the synergetic photothermal therapy (PTT)-NO therapy-chemotherapy modes. The built NIR-triggered combination therapy nanoplatform can serve as a strategy for multimodal collaboration.

Multifunctional Inorganic-Organic Composite Carriers for Synergistic Dual Therapy of Melanoma

Many methods for cancer treatment have been developed. Among them photothermal therapy (PTT) has drawn the most significant attention due to its noninvasiveness, remote control activation, and low side effects. However, a limited depth of light penetration of PTT is the main drawback. To improve the therapeutic efficiency, the development of combined PTT with other therapeutic agents is highly desirable. In this work, we have designed multifunctional composite carriers based on polylactic acid (PLA) particles decorated with gold nanorods (Au NRs) as nanoheaters and selenium nanoparticles (Se NPs) for reactive oxygen species (ROS) production in order to perform a combined PTT against B16-F10 melanoma. To do this, we have optimized the synthesis of PLA particles modified with Se NPs and Au NRs (PLA-Se:Au), studied the cellular interactions of PLA particles with B16-F10 cells, and analyzed in vivo biodistribution and tumor inhibition efficiency. The results of in vitro and in vivo experiments demonstrated the synergistic effect from ROS induced by Se NPs and the heating from Au NRs. In melanoma tumor-bearing mice, intratumoral injection of PLA-Se:Au followed by laser irradiation leads to almost complete elimination of tumor tissues. Thus, the optimal photothermal properties and ROS-generating capacity allow us to recommend PLA-Se:Au as a promising candidate for the development of the combined PTT against melanoma.

Monitoring of optical properties of tumors during laser plasmon photothermal therapy

We studied grafted tumors obtained by subcutaneous implantation of kidney cancer cells into male white rats. Gold nanorods with a plasmon resonance of about 800 nm were injected intratumorally for photothermal heating. Experimental irradiation of tumors was carried out percutaneously using a near-infrared diode laser. Changes in the optical properties of the studied tissues in the spectral range 350-2200 nm under plasmonic photothermal therapy (PPT) were studied. Analysis of the observed changes in the absorption bands of water and hemoglobin made it possible to estimate the depth of thermal damage to the tumor. A significant decrease in absorption peaks was observed in the spectrum of the upper peripheral part and especially the tumor capsule. The obtained changes in the optical properties of tissues under laser irradiation can be used to optimize laboratory and clinical PPT procedures.

Photothermal Actuation of Thick 3D-Printed Liquid Crystalline Elastomer Nanocomposites

Liquid crystalline elastomers (LCEs) are stimuli-responsive materials that transduce an input energy into a mechanical response. LCE composites prepared with photothermal agents, such as nanoinclusions, are a means to realize wireless, remote, and local control of deformation with light. Amongst photothermal agents, gold nanorods (AuNRs) are highly efficient converters when the irradiation wavelength matches the longitudinal surface plasmon resonance (LSPR) of the AuNRs. However, AuNR aggregation broadens the LSPR which also reduces photothermal efficiency. Here, the surface chemistry of AuNRs is engineered via a well-controlled two-step ligand exchange with a monofunctional poly(ethylene glycol) (PEG) thiol that greatly improves the dispersion of AuNRs in LCEs. Accordingly, LCE-AuNR nanocomposites with very low PEG-AuNR content (0.01 wt%) prepared by 3D printing are shown to be highly efficient photothermal actuators with rapid response (>60% strain s-1) upon irradiation with near-infrared (NIR; 808 nm) light. Because of the excellent dispersion of PEG-AuNR within the LCE, unabsorbed NIR light transmits through the nanocomposites and can actuate a series of samples. Further, the dispersion also allows for the optical deformation of millimeter-thick 3D printed structures without sacrificing actuation speed. The realization of well-dispersed nanoinclusions to maximize the stimulus-response of LCEs can benefit functional implementation in soft robotics or medical devices.

Effects Induced by the Temperature and Chemical Environment on the Fluorescence of Water-Soluble Gold Nanoparticles Functionalized with a Perylene-Derivative Dye

We developed a fluorescent molecular probe based on gold nanoparticles functionalized with N,N'-bis(2-(1-piperazino)ethyl)-3,4,9,10-perylenetetracarboxylic acid diimide dihydrochloride, and these probes exhibit potential for applications in microscopic thermometry. The intensity of fluorescence was affected by changes in temperature. Chemical environments, such as different buffers with the same pH, also resulted in different fluorescence intensities. Due to the fluorescence intensity changes exhibited by modified gold nanoparticles, these materials are promising candidates for future technologies involving microscopic temperature measurements.

Radiotherapy Metastatic Prostate Cancer Cell Lines Treated with Gold Nanorods Modulate miRNA Signatures

MicroRNA (miRNA) modulation has been identified as a promising strategy for improving the response of human prostate cancer (PCa) to radiotherapy (RT). Studies have shown that mimics or inhibitors of miRNAs could modulate the sensitivity of PCa cells to RT. In addition, pegylated gold nanoparticles have been studied as a therapeutic approach to treat PCa cells and/or vehicles for carrying miRNAs to the inside of cells. Therefore, we evaluated the capacity of hypofractionated RT and pegylated gold nanorods (AuNPr-PEG) to modulate the miRNA signature on PCa cells. Thus, RT-qPCR was used to analyze miRNA-95, miRNA-106-5p, miRNA-145-5p, and miRNA-541-3p on three human metastatic prostate cell lines (PC3, DU145, and LNCaP) and one human prostate epithelial cell line (HprEpiC, a non-tumor cell line) with and without treatment. Our results showed that miRNA expression levels depend on cell type and the treatment combination applied using RT and AuNPr-PEG. In addition, cells pre-treated with AuNPr-PEG and submitted to 2.5 Gy per day for 3 days decreased the expression levels of miRNA-95, miRNA-106, miRNA-145, and miRNA-541-3p. In conclusion, PCa patients submitted to hypofractionated RT could receive personalized treatment based on their metastatic cellular miRNA signature, and AuNPr-PEG could be used to increase metastatic cell radiosensitivity.

Exploring Rotational Diffusion with Plasmonic Coupling

Measuring the orientation dynamics of nanoparticles and nonfluorescent molecules in real time with optical methods is still a challenge in nanoscience and biochemistry. Here, we examine optoplasmonic sensing taking the rotational diffusion of plasmonic nanorods as an experimental model. Our detection method is based on monitoring the dark-field scattering of a relatively large sensor gold nanorod (GNR) (40 nm in diameter and 112 nm in length) as smaller plasmonic nanorods cross its near field. We observe the rotational motion of single small gold nanorods (three samples with about 5 nm in diameter and 15.5, 19.1, and 24.6 nm in length) in real time with a time resolution around 50 ns. Plasmonic coupling enhances the signal of the diffusing gold nanorods, which are 1 order of magnitude smaller in volume (about 300 nm3) than those used in our previous rotational diffusion experiments. We find a better angular sensitivity with plasmonic coupling in comparison to the free diffusion in the confocal volume. Yet, the angle sensitivity we find with plasmonic coupling is reduced compared to the sensitivity expected from simulations at fixed positions due to the simultaneous translational and rotational diffusion of the small nanorods. To get a reliable plasmonic sensor with the full angular sensitivity, it will be necessary to construct a plasmonic assembly with positions and orientations nearly fixed around the optimum geometry.

Triphenylphosphonium-Functionalized Gold Nanorod/Zinc Oxide Core-Shell Nanocomposites for Mitochondrial-Targeted Phototherapy

Phototherapies, such as photothermal therapy (PTT) and photodynamic therapy (PDT), combined with novel all-in-one light-responsive nanocomposites have recently emerged as new therapeutic modalities for the treatment of cancer. Herein, we developed novel all-in-one triphenylphosphonium-functionalized gold nanorod/zinc oxide core-shell nanocomposites (CTPP-GNR@ZnO) for mitochondrial-targeted PTT/PDT owing to their good biocompatibility, tunable and high optical absorption, photothermal conversion efficiency, highest reactive oxygen species (ROS) generation, and high mitochondrial-targeting capability. Under laser irradiation of 780 nm, the CTPP-GNR@ZnO core-shell nanocomposites effectively produced heat in addition to generating ROS to induce cell death, implying a synergistic effect of mild PTT and PDT in combating cancer. Notably, the in vitro PTT/PDT effect of CTPP-GNR@ZnO core-shell nanocomposites exhibited effective cell ablation (95%) and induced significant intracellular ROS after the 780 nm laser irradiation for 50 min, indicating that CTPP in CTPP-GNR@ZnO core-shell nanocomposites can specifically target the mitochondria of CT-26 cells, as well as generate heat and ROS to completely kill cancer cells. Overall, this light-responsive nanocomposite-based phototherapy provides a new approach for cancer synergistic therapy.

Laser-Induced Intracellular Delivery: Exploiting Gold-Coated Spiky Polymeric Nanoparticles and Gold Nanorods under Near-Infrared Pulses for Single-Cell Nano-Photon-Poration

This study explores the potential of laser-induced nano-photon-poration as a non-invasive technique for the intracellular delivery of micro/macromolecules at the single-cell level. This research proposes the utilization of gold-coated spiky polymeric nanoparticles (Au-PNPs) and gold nanorods (GNRs) to achieve efficient intracellular micro/macromolecule delivery at the single-cell level. By shifting the operating wavelength towards the near-infrared (NIR) range, the intracellular delivery efficiency and viability of Au-PNP-mediated photon-poration are compared to those using GNR-mediated intracellular delivery. Employing Au-PNPs as mediators in conjunction with nanosecond-pulsed lasers, a highly efficient intracellular delivery, while preserving high cell viability, is demonstrated. Laser pulses directed at Au-PNPs generate over a hundred hot spots per particle through plasmon resonance, facilitating the formation of photothermal vapor nanobubbles (PVNBs). These PVNBs create transient pores, enabling the gentle transfer of cargo from the extracellular to the intracellular milieu, without inducing deleterious effects in the cells. The optimization of wavelengths in the NIR region, coupled with low laser fluence (27 mJ/cm2) and nanoparticle concentrations (34 µg/mL), achieves outstanding delivery efficiencies (96%) and maintains high cell viability (up to 99%) across the various cell types, including cancer and neuronal cells. Importantly, sustained high cell viability (90-95%) is observed even 48 h post laser exposure. This innovative development holds considerable promise for diverse applications, encompassing drug delivery, gene therapy, and regenerative medicine. This study underscores the efficiency and versatility of the proposed technique, positioning it as a valuable tool for advancing intracellular delivery strategies in biomedical applications.

Temperature-Modulated Reversible Clustering of Gold Nanorods Driven by Small Surface Ligands

Temperature-modulated colloidal phase of plasmonic nanoparticles is a convenient playground for resettable soft-actuators or colorimetric sensors. To render reversible clustering under temperature change, bulky ligands are required, especially if anisotropic morphologies are of interest. This study showcases thermoresponsive gold nanorods by employing small surface ligands, bis (p-sulfonatophenyl) phenyl-phosphine dihydrate dipotassium salt (BSPP) and native cationic surfactant. Temperature-dependent analysis in real-time allowed to describe the structural features (interparticle distance and cluster size) as well as thermal parameters, melting and freezing temperatures. These findings suggest that neither covalent Au-S bonds nor bulky ligands are required to obtain a robust thermoresponsive system based on anisotropic gold nanoparticles, paving the way to stimuli-responsive nanoparticles with a wide range of sizes and geometries.

Differential Detection of Amyloid Aggregates in Old Animals Using Gold Nanorods by Computerized Tomography: A Pharmacokinetic and Bioaccumulation Study

Introduction

The development of new materials and tools for radiology is key to the implementation of this diagnostic technique in clinics. In this work, we evaluated the differential accumulation of peptide-functionalized GNRs in a transgenic animal model (APPswe/PSENd1E9) of Alzheimer's disease (AD) by computed tomography (CT) and measured the pharmacokinetic parameters and bioaccumulation of the nanosystem.

Methods

The GNRs were functionalized with two peptides, Ang2 and D1, which conferred on them the properties of crossing the blood-brain barrier and binding to amyloid aggregates, respectively, thus making them a diagnostic tool with great potential for AD. The nanosystem was administered intravenously in APPswe/PSEN1dE9 model mice of 4-, 8- and 18-months of age, and the accumulation of gold nanoparticles was observed by computed tomography (CT). The gold accumulation and biodistribution were determined by atomic absorption.

Results

Our findings indicated that 18-month-old animals treated with our nanosystem (GNR-D1/Ang2) displayed noticeable differences in CT signals compared to those treated with a control nanosystem (GNR-Ang2). However, no such distinctions were observed in younger animals. This suggests that our nanosystem holds the potential to effectively detect AD pathology.

Discussion

These results support the future development of gold nanoparticle-based technology as a more effective and accessible alternative for the diagnosis of AD and represent a significant advance in the development of gold nanoparticle applications in disease diagnosis.

Predictable and adjustable broadband gold nanorods for photothermal effects and foldable performances

Colloidal gold nanorods (GNRs) have demonstrated their potential to absorb light within specific wavelength bands and induce photothermal effects. However, the unpredictability and lack of adjustability in the broadband spectrum formed by the self-assembly of gold nanospheres or the coupling of various sizes of GNRs have posed significant challenges. To address this, we have developed broadband GNRs (BGNRs) with a predictable and adjustable extinction band in the visible and near-infrared regions. The BGNRs were synthesized by simply mixing GNRs with different aspect ratios, allowing for control over the bandwidths and positions of the extinction bands. Subsequently, the BGNRs were coated with silica and underwent surface modification. The resulting BGNRs@SiO2were then mixed with either polydimethylsiloxane (PDMS) or polyvinylidene fluoride (PVDF) to create BGNRs@SiO2/PDMS (or PVDF) films. The BGNRs@SiO2/PDMS and BGNRs@SiO2/PVDF films both exhibit excellent photothermal performance properties. Additionally, the light absorption intensity of the BGNRs@SiO2/PVDF film linearly increases upon folding, leading to significantly enhanced photothermal performance after folding. This work demonstrates that plasmonic colloidal GNRs, without the need for coupling, can yield predictable and adjustable extinction bands. This finding holds great promise for future development and practical applications, particularly in the transfer of these properties to films.

Direct Observation of In-Focus Plasmonic Cargos via Breaking Angular Degeneracy in Differential Interference Contrast Microscopy

Breaking the angular degeneracy arising from the 2-fold optical symmetry of plasmonic anisotropic nanoprobes is critical in biological studies. In this study, we propose differential interference contrast (DIC) microscopy-based focused orientation and position imaging (dFOPI) to break the angular degeneracy of single gold nanorods (AuNRs). Single in-focus AuNRs (39 nm × 123 nm) within a spherical mesoporous silica shell were characterized with high throughput and produced distinct doughnut-shaped DIC image patterns featuring two lobes in the peripheral region, attributed to the scattering contribution of the AuNRs with large scattering cross sections. Interestingly, rotation of the lobes was observed in the focal plane for a large AuNR (>100 nm) tilted by more than ∼20° from the horizontal plane as the rotational stage was moved by 10° in a rotational study. From the rotation-dependent characteristic patterns, we directly visualized counterclockwise/clockwise rotations without the angular degeneracy at the localized surface plasmon resonance wavelength. Therefore, our dFOPI method can be applied for in vivo studies of important biological systems. To validate this claim, we tracked the three-dimensional rotational behavior of transferrin-modified in-focus AuNRs during clathrin-mediated endocytosis in real time without sacrificing the temporal and spatial resolution. In the invagination and scission stage, one or two directed twist motions of the AuNR cargos detached the AuNR-containing vesicles from the cell membrane. Furthermore, the dFOPI method directly visualized and revealed the right-handed twisting action along the dynamin helix in dynamin-catalyzed fission in live cells.

Promoting Intratumoral Drug Accumulation by Bio-Membrane Regulated Active Targeting for Tumor Photothermal Therapy

Introduction

Insufficient tumor permeability and inadequate nanoparticle retention continue to be significant limitations in the efficacy of anti-tumor drug therapy. Numerous studies have focused on enhancing tumor perfusion by improvement of tumor-induced endothelial leakage, often known as the enhanced permeability and retention (EPR) effect. However, these approaches have produced suboptimal therapeutic outcomes and have been associated with significant side effects. Therefore, in this study, we prepared tumor cell membrane-coated gold nanorods (GNR@TM) to enhance drug delivery in tumors through homogeneous targeting of tumor cell membranes and in situ real-time photo-controlled therapy.

Methods

Here, we fabricated GNR@TM, and characterized it using various techniques including Ultraviolet-Visible (UV-Vis) spectrophotometer, particle size analysis, potential measurement, and transmission electron microscopy (TEM). The cellular uptake and cytotoxicity of GNR@TM were analyzed by flow cytometry, confocal laser scanning microscopy (CLSM), TEM, CCK8 assay and live/dead staining. Tissue drug distribution was determined by inductively coupled plasma mass spectrometry (ICP-MS) and immunofluorescence staining. Furthermore, to evaluate the therapeutic effect, mice bearing MB49 tumors were intravenously administered with GNR@TM. Subsequently, near-infrared (NIR) laser therapy was performed, and the mice's tumor growth and body weight were monitored.

Results

The tumor cell membrane coating endowed GNR@TM with extended circulation time in vivo and homotypic targeting to tumor, thereby enhancing the accumulation of GNR@TM within tumors. Upon 780 nm laser, GNR@TM exhibited excellent photothermal conversion capability, leading to increased tumor vascular leakage. This magnification of the EPR effect induced by NIR laser further increased the accumulation of GNR@TM at the tumor site, demonstrating strong antitumor effects in vivo.

Conclusion

In this study, we successfully developed a NIR-triggered nanomedicine that increased drug accumulation in tumor through photo-controlled therapy and homotypic targeting of the tumor cell membrane. GNR@TM has been demonstrated effective suppression of tumor growth, excellent biocompatibility, and significant potential for clinical applications.

Nanoparticle Size Influences the Self-Assembly of Gold Nanorods Using Flexible Streptavidin-Biotin Linkages

The self-assembly of colloidal nanocrystals remains of robust interest due to its potential in creating hierarchical nanomaterials that have advanced function. For gold nanocrystals, junctions between nanoparticles yield large enhancements in local electric fields under resonant illumination, which is suitable for surface-enhanced spectroscopies for molecular sensors. Gold nanorods can provide such plasmonic fields at near-infrared wavelengths of light for longitudinal excitation. Through the use of careful concentration and stoichiometric control, a method is reported herein for selective biotinylation of the ends of gold nanorods for simple, consistent, and high-yielding self-assembly upon addition of the biotin-binding protein streptavidin. This method was applied to four different sized nanorods of similar aspect ratio and analyzed through UV-vis spectroscopy for qualitative confirmation of self-assembly and transmission electron microscopy to determine the degree of self-assembly in end-linked nanorods. The yield of end-linked assemblies approaches 90% for the largest nanorods and approaches 0% for the smallest nanorods. The number of nanorods linked in one chain also increases with an increased nanoparticle size. The results support the notion that the lower ligand density at the ends of the larger nanorods yields preferential substitution reactions at those ends and hence preferential end-to-end assembly, while the smallest nanorods have a relatively uniform ligand density across their surfaces, leading to spatially random substitution reactions.

Tuning Chemical Interface Damping: Competition between Surface Damping Pathways in Amalgamated Gold Nanorods Coated with Mesoporous Silica Shells

The mechanism of mercury (Hg) amalgamation in gold nanorods coated with a mesoporous silica shell (AuNRs@mSiO2) and the effect of chemical treatments on the localized surface plasmon resonance (LSPR) spectral changes in single amalgamated AuNRs@mSiO2 remains unclear. In this study, we investigated Hg amalgamation and inward Hg diffusion in single AuNRs@mSiO2 without structural deformation via dark-field scattering spectroscopy and X-ray photoelectron spectroscopy. Then, we investigated the chemisorption of thiol molecules on single amalgamated AuNRs@Hg-mSiO2. Unlike previous studies on single AuNRs, the thiolation on single AuNRs@Hg-mSiO2 resulted in a redshift and line width narrowing of the LSPR peak within 1 h. To determine the chemical effect, we investigated the competition between two surface damping pathways: metal interface damping (MID) and chemical interface damping (CID). When we exposed amalgamated AuNRs@Hg-mSiO2 to 1-alkanethiols with three different carbon chain lengths for 1 h, we observed an increase in the line width broadening with longer chain lengths owing to enhanced CID, demonstrating the tunability of CID and LSPR properties upon chemical treatments. We also investigated the competition between the two surface damping pathways as a function of the time-dependent Au-Hg surface properties in AuNRs@Hg-mSiO2. The 24-h Hg treatment resulted in increased line width broadening compared to the 1-h treatment for the same thiols, which was attributed to the predominance of CID. This was in contrast to the predominance of MID under the 1-h treatment, which formed a core-shell structure. Therefore, this study provides new insights into the Hg amalgamation process, the effect of chemical treatments, competition between surface decay pathways, and LSPR control in AuNRs@mSiO2.

Product Metrics for the Manufacturability of Single-Crystal Gold Nanorods via Reaction Engineering

Colloidal gold nanorods (AuNRs) are integral to a diverse array of technologies, ranging from plasmonic imaging, therapeutics, and sensors to large-area coatings, catalysts, filters, and optical attenuators. Different lab-scale strategies are available to fabricate AuNRs with a broad range of physiochemical properties; however, this is achieved at the cost of synthetic robustness and scalability, which limit broad adoption in these technologies. To address this, Product Metrics (Structural Precision, Shape Yield, and Reagent Utilization), measurable with UV-vis-NIR spectroscopy, are defined to evaluate the efficiency of AuNR production. The dependency of these metrics on reaction formulation (reagent concentrations, pH, and T) is established and used to develop a two-step method based on optimizing symmetry breaking of seed particles, followed by the controlled extension of AuNR length and volume. Reagent concentrations and their relative molar ratios with respect to HAuCl4 are adjusted for each step to optimize these adversarial processes. Based on these correlations, we successfully demonstrate the production of highly concentrated AuNRs with targeted volume and aspect ratio while reducing particle impurities and shape dispersity to less than 4 and 10%, respectively, by employing a rationalized formulation that maximizes both product quality and Reagent Utilization. This results in a product density of 1.6 mg/mL, which is 20 times higher than that of conventional literature methods, with commensurate reduction in environmental waste products.

Novel Gold Nanorods@Thiolated Pectin on the Killing of HeLa Cells by Photothermal Ablation

Gold nanorods (AuNRs) have attracted attention in the field of biomedicine, particularly for their potential as photothermal agents capable of killing tumor cells by photothermic ablation. In this study, the synthesis of novel AuNRs stabilized with thiolated pectin (AuNR@SH-PEC) is reported. To achieve this, thiolated pectin (SH-PEC) was obtained by chemically binding cysteamine motifs to the pectin backbone. The success of the reaction was ascertained using FTIR-ATR. Subsequently, the SH-PEC was used to coat and stabilize the surface of AuNRs (AuNR@SH-PEC). In this context, different concentrations of SH-PEC (0.25, 0.50, 1.0, 2.0, 4.0, and 8.0 mg/mL) were added to 0.50 mL of AuNRs suspended in CTAB, aiming to determine the experimental conditions under which AuNR@SH-PEC maintains stability. The results show that SH-PEC effectively replaced the CTAB adsorbed on the surface of AuNRs, enhancing the stability of AuNRs without affecting their optical properties. Additionally, scanning electron and atomic force microscopy confirmed that SH-PEC is adsorbed into the surface of the AuNRs. Importantly, the dimension size (60 × 15 nm) and the aspect ratio (4:1) remained consistent with those of AuNRs stabilized with CTAB. Then, the photothermal properties of gold nanorods were evaluated by irradiating the aqueous suspension of AuNR@SH-PEC with a CW laser (808 nm, 1 W). These results showed that photothermal conversion efficiency is similar to the photothermal conversion observed for AuNR-CTAB. Lastly, the cell viability assays confirmed that the SH-PEC coating enhanced the biocompatibility of AuNR@SH-PEC. Most important, the viability cell assays subjected to laser irradiation in the presence of AuNR@SH-PEC showed a decrease in the cell viability relative to the non-irradiated cells. These results suggest that AuNRs stabilized with thiolated pectin can potentially be exploited in the implementation of photothermal therapy.

Gold-Nanorod-Assisted Live Cell Nuclear Imaging Based on Near-Infrared II Dark-Field Microscopy

Dark-field microscopy offers several advantages, including high image contrast, minimal cell damage, and the absence of photobleaching of nanoprobes, which make it highly advantageous for cell imaging. The NIR-II window has emerged as a prominent research focus in optical imaging in recent years, with its low autofluorescence background in biological samples and high imaging SBR. In this study, we initially compared dark-field imaging results of colorectal cancer cells in both visible and NIR-II wavelengths, confirming the superior performance of NIR-II imaging. Subsequently, we synthesized gold nanorods with localized surface plasmon resonance (LSPR) absorption peaks in the NIR-II window. After bio-compatible modification, we non-specifically labeled colorectal cancer cells for NIR-II dark-field scattering imaging. The imaging results revealed a sixfold increase in SBR, especially in the 1425-1475 nm wavelength range. Finally, we applied this imaging system to perform dark-field imaging of cell nuclei in the NIR-II region and used GNRs for specific nuclear labeling in colorectal cancer cells. The resulting images exhibited higher SBR than non-specifically-labeled cell imaging, and the probe's labeling was precise, confirming the potential application of this system in photothermal therapy and drug delivery for cancer cells.

Porphyrin as a Cryoprotectant for Graphene Oxide-Coated Gold Nanorods to Produce Conjugated Product with Improved Stability and Opto-Phototherapeutic Properties

Graphene oxide (GO) as a coating material for gold nanorods (AuNRs) has gained interest in reducing toxicity and improving the photothermal profiling of AuNRs. However, there is still a challenge regarding the storage of colloidal suspensions of GO-coated AuNRs (GO@AuNRs). Hence, the conjugation of GO@AuNRs to meso-tetra-(4-sulfonatophenyl)porphyrin (TPPS4), an anionic water-soluble porphyrin, has been reported to enhance their re-dispensability and improve their phototherapeutic properties. The AuNRs and GO were synthesised using seed-mediated and Hummers' methods, respectively. The GO@AuNRs were conjugated to TPPS4 and characterised using ultraviolet-visible-near-infrared (UV-Vis-NIR) spectroscopy, zeta analyser, dynamic light scattering (DLS), photoluminescence spectroscopy (PL), x-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM) and Fourier-transform infrared spectroscopy (FTIR) before freeze-drying. The results showed that the AuNRs were sandwiched between GO and TPPS4. After freeze-drying, the freeze-dried conjugate was dispensed in deionised water without adding cryoprotectants and its properties were compared to those of the unfreeze-dried conjugate. The results showed that the freeze-dried conjugate contained similar optical properties to the unfreeze-dried conjugate. However, the bare GO@AuNRs showed a change in the optical properties after freeze-drying. These results revealed that porphyrin is an excellent additive to reduce the freeze-drying stress tolerance of GO@AuNRs. The freeze-dried conjugate also showed both singlet oxygen and photothermal properties of GO@AuNRs and porphyrin. These results indicated that the freeze-dried conjugate is a promising dual photodynamic and photothermal agent, and porphyrin can act as a cryoprotectant.

Interactions between gold nanoparticles with different morphologies and human serum albumin

Introduction: Three different shapes of gold nanoparticles were synthesized in this experiment. At the same time, studies compared their effects with human serum albumin (HSA). Methods: Gold nanoparticles (AuNPs) with three different morphologies, such as, nanospheres (AuNSs), nanorods (AuNRs), and nanoflowers (AuNFs) were synthesized via a seeding method and their characteristic absorption peaks were detected using ultraviolet-visible (UV-vis) absorption spectroscopy, Telectron microscopy (TEM), Dynamic Light Scattering (DLS) and Zeta potential measurements, circular dichroism (CD), and Fourier transform infrared spectroscopy (FTIR) to study the interactions between them and HSA. By comparing the thermodynamic parameters and quenching mechanism of the three materials, similarities and differences were determined in their interactions with HSA. Results: The results showed that with an increase in the concentration of the AuNPs with the three different morphologies, the UV-vis absorption peak intensity of the mixed solution increased, but its fluorescence intensity was quenched. This indicates that the three types of AuNPs interact with HSA, and that the interactions between them represent a static quenching process, which is consistent with the conclusions derived from three-dimensional fluorescence experiments. Through variable-temperature fluorescence experiments, the binding constants, number of binding sites, and thermodynamic parameters of the interactions between the three types of AuNPs and HSA were determined. The Gibbs free energy changes were <0, indicating that the reactions of the three types of AuNPs with HSA are spontaneous, resulting in associated matter. Binding constant measurements indicated that the strongest binding took place between the AuNFs and HSA. In addition, the results of fluorescence, CD spectroscopy, and FTIR showed that three different shapes of AuNPs can induce conformational changes in HSA and reduce the α-helix content. Among them, AuNFs have the smallest ability to induce conformational changes. Discussion: According to studies, AuNFs interact more favorably with HSA. This can be used as a reference for the administration of drugs containing AuNPs.

Combined Facile Synthesis, Purification, and Surface Functionalization Approach Yields Monodispersed Gold Nanorods for Drug Delivery Applications

Synthesizing gold nanorods (AuNRs) by seed-mediated growth method results in the presence of undesired size and shape particles by-products occupying 10-90% of the population. In this study, AuNRs are synthesized by the seed-mediated growth method using cetyltrimethylammonium bromide (CTAB) as a surfactant. AuNRs with redshifted longitudinal localized surface plasmon resonance (LLSPR) peak, localized in the biological "transparency window" (650-1350 nm), are synthesized after optimizing seed solution, silver nitrate solution, and hydrochloric acid solution volumes, based on the published protocols. A two-step purification method, dialysis followed by centrifugation, is applied to remove excess CTAB and collect LLSPR-redshifted AuNRs with high rod purity (>90%). CTAB is subsequently exchanged with polyethylene glycol (PEG) to improve AuNRs biocompatibility. PEGylated AuNRs are confirmed innocuous to both SN4741 cells and B16F10 cells by the modified MTT assay and the modified lactate dehydrogenase (LDH) assay up to 1 nm and 24 h incubation. In this study, a combined facile synthesis, purification, and surface functionalization approach is proposed to obtain water-dispersible monodispersed AuNRs for drug delivery applications.

Multispectral optoacoustic tomography is more sensitive than micro-computed tomography for tracking gold nanorod labelled mesenchymal stromal cells

Tracking the fate of therapeutic cell types is important for assessing their safety and efficacy. Bioluminescence imaging (BLI) is an effective cell tracking technique, but poor spatial resolution means it has limited ability to precisely map cells in vivo in 3D. This can be overcome by using a bimodal imaging approach that combines BLI with a technique capable of generating high-resolution images. Here we compared the effectiveness of combining either multispectral optoacoustic tomography (MSOT) or micro-computed tomography (micro-CT) with BLI for tracking the fate of luciferase+ human mesenchymal stromal cells (MSCs) labelled with gold nanorods. Following subcutaneous administration in mice, the MSCs could be readily detected with MSOT but not with micro-CT. We conclude that MSOT is more sensitive than micro-CT for tracking gold nanorod-labelled cells in vivo and depending on the route of administration, can be used effectively with BLI to track MSC fate in mice.

Near-Infrared Remotely Controllable Shape Memory Biodegradable Occluder Based on Poly(l-lactide-co-ε-caprolactone)/Gold Nanorod Composite

Biodegradable occluders, which can efficiently eliminate the complications caused by permanent foreign implants, are considered to be the next-generation devices for the interventional treatment of congenital heart disease. However, the controllability of the deployment process of degradable occluders remains a challenge. In this work, a near-infrared (NIR) remotely controllable biodegradable occluder is explored by integrating poly(l-lactide-co-ε-caprolactone) (PLCL) with poly(ethylene glycol)-modified gold nanorods (GNR/PEG). The caprolactone structural units can effectively increase the toughness of poly(l-lactide) and reduce the shape-memory transition temperature of the occluder to a more tissue-friendly temperature. Gold nanorods endow the PLCL-GNR/PEG composite with an excellent photothermal effect. The obtained occluder can be easily loaded into a catheter for transport and spatiotemporally expanded under irradiation with near-infrared light to block the defect site. Both in vitro and in vivo biological experiments showed that PLCL-GNR/PEG composites have good biocompatibility, and the PEGylated gold nanorods could improve the hemocompatibility of the composites to a certain extent by enhancing their hydrophilicity. As a thermoplastic shape-memory polymer, PLCL-GNR/PEG can be easily processed into various forms and structures for different patients and lesions. Therefore, PLCL-GNR/PEG has the potential to be considered as a competitive biodegradable material not only for occluders but also for other biodegradable implants.

Gold Nanomaterial System That Enables Dual Photothermal and Chemotherapy for Breast Cancer

This study involves the fabrication and characterization of a multifunctional therapeutic nanocomposite system, as well as an assessment of its in vitro efficacy for breast cancer treatment. The nanocomposite system combines gold nanorods (GNRs) and gold nanoclusters (GNCs) to enable a combination of photothermal therapy and doxorubicin-based chemotherapy. GNRs of various sizes but exhibiting similar absorbance spectra were synthesized and screened for photothermal efficiency. GNRs exhibiting the highest photothermal efficiency were selected for further experiments. GNCs were synthesized in bovine serum albumin (BSA) and integrated into citrate-capped GNRs using layer-by-layer assembly. Glutaraldehyde crosslinking with the lysine residues in BSA was employed to immobilize the GNCs onto the GNRs, forming a stable "soft gel-like" structure. This structure provided binding sites for doxorubicin through electrostatic interactions and enhanced the overall structural stability of the nanocomposite. Additionally, the presence of GNCs allowed the nanocomposite system to emit robust fluorescence in the range of ~520 nm to 700 nm for self-detection. Hyaluronic acid was functionalized on the exterior surface of the nanocomposite as a targeting moiety for CD44 to improve the cellular internalization and specificity for breast cancer cells. The developed nanocomposite system demonstrated good stability in vitro and exhibited a pH- and near-infrared-responsive drug release behavior. In vitro studies showed the efficient internalization of the nanocomposite system and reduced cellular viability following NIR irradiation in MDA-MB-231 breast cancer cells. Together, these results highlight the potential of this nanocomposite system for targeted breast cancer therapy.

Nonlocal Optical Response of Particle Plasmons in Single Gold Nanorods

The investigation of particle plasmons in metal nanoparticles has predominantly relied on local optical response approximations. However, as the nanoparticle size approaches the average distance of electrons to the metal surface, mesoscopic effects such as size-dependent plasmon line width broadening and resonance energy blue shifts are expected to become observable. In this work, we compared the experimental spectral characteristics with simulated values obtained by using a generalized nonlocal optical response theory-based local analogue model. Our results show that the nonlocal plasmon damping effects in single nanoparticles are less pronounced than those observed in plasmon-coupled systems. Furthermore, our research demonstrates that single-particle dark-field spectroscopy is an effective tool for investigating the nonlocal optical response of particle plasmons in single nanoparticles. These results have important implications for the rational design of novel nanophotonic devices.

Temperature-Derived Purification of Gold Nano-Bipyramids for Colorimetric Detection of Tannic Acid

Gold nanostructures have attracted broad attention. Among various nanostructures, gold nanobipyramids have shown great potential in sensing, biomedicine, environmental protection, chemical catalysis, and optics due to their unique physical and optical properties and ease of chemical functionalization. Compared with other plasmonic nanostructures, gold nanobipyramids possess narrow optical resonances, stronger plasmonic local field enhancement, and size- and shape-dependent surface plasmon resonance. However, the synthesis and purification of homogeneous gold nanobipyramids are very challenging. The gold nanobipyramids synthesized via the commonly used seed-mediated growth method have low yields and are often coproduced with spherical nanoparticles. In this study, we reported a temperature-derived purification method for the isolation of gold bipyramids. In the presence of salt, by altering the temperature of the solution, large gold bipyramids can be separated from small spherical nanoparticles. As a result, a yield of as high as 97% gold nanobipyramids can be achieved through a single round of purification, and correspondingly, the ratio between the longitudinal surface plasmon resonance (LSPR) and transverse SPR intensity significantly increases to as high as 6.7. The purified gold nanobipyramids can be used as a colorimetric probe in the detection of tannic acid with a detection limit of 0.86 μM and a linear detection range from 1.25 to 37.5 μM.

Synthesis of Methotrexate-Loaded Dumbbell-Shaped Titanium Dioxide/Gold Nanorods Coated with Mesoporous Silica and Decorated with Upconversion Nanoparticles for Near-Infrared-Driven Trimodal Cancer Treatment

This study prepared dumbbell-shaped titanium dioxide (TiO₂)/gold nanorods (AuNRs) coated with mesoporous silica shells (mS) (AuNRs-TiO₂@mS). Methotrexate (MTX) was further loaded into the AuNRs-TiO₂@mS, and then upconversion nanoparticles (UCNPs) were decorated to form AuNRs-TiO₂@mS-MTX: UCNP nanocomposites. TiO₂ is used as an intense photosensitizer (PS) to produce cytotoxic reactive oxygen species (ROS), leading to photodynamic therapy (PDT). Concurrently, AuNRs exhibited intense photothermal therapy (PTT) effects and photothermal conversion efficiency. In vitro results suggested that these nanocomposites can kill oral cancer cells (HSC-3) without toxicity through irradiation of NIR laser, owing to the synergistic effect. The in vivo studies indicated that these nanocomposites exhibited excellent antitumor effects through synergistic PDT/PTT/chemotherapy under a near-infrared (NIR) 808 nm laser irradiation. Thus, these AuNRs-TiO₂@mS: UCNP nanocomposites have great potential to undergo deep tissue penetration with enhanced synergistic effects through NIR-triggered light for cancer treatment.

Morphologic Design of Nanogold Carriers for a Carbonic Anhydrase Inhibitor: Effect on Ocular Retention and Intraocular Pressure

Morphologic design of nanomaterials for a diversity of biomedical applications is of increasing interest. The aim of the current study is to construct therapeutic gold nanoparticles of different morphologies and investigate their effect on ocular retention and intraocular pressure in a glaucoma rabbit model. Poly(lactic-co-glycolic acid) (PLGA)-coated nanorods and nanospheres have been synthesized and loaded with carbonic anhydrase inhibitor (CAI), and characterized in vitro for their size, zeta potential and encapsulation efficiency. Nanosized PLGA-coated gold nanoparticles of both morphologies demonstrated high entrapment efficiency (˃ 98%) for the synthesized CAI and the encapsulation of the drug into the developed nanoparticles was confirmed via Fourier transform-infrared spectroscopy. In vivo studies revealed a significant reduction in intraocular pressure upon instillation of drug-loaded nanogold formulations compared to the marketed eye drops. Spherical nanogolds exhibited a superior efficacy compared to the rod-shaped counterparts, probably due to the enhanced ocular retention of spherical nanogolds within collagen fibers of the stroma, as illustrated by transmission electron microscopy imaging. Normal histological appearance was observed for the cornea and retina of the eyes treated with spherical drug-loaded nanogolds. Hence, incorporation of a molecularly-designed CAI into nanogold of tailored morphology may provide a promising strategy for management of glaucoma.

Burst-by-Burst Measurement of Rotational Diffusion at Nanosecond Resolution Reveals Hot-Brownian Motion and Single-Chain Binding

We record dark-field scattering bursts of individual gold nanorods, 52 × 15 nm² in average size, freely diffusing in water suspension. We deduce their Brownian rotational diffusion constant from autocorrelation functions on a single-event basis. Due to spectral selection by the plasmonic resonance with the excitation laser, the distribution of rotational diffusion constants is much narrower than expected from the size distribution measured by TEM. As rotational diffusion depends on particle hydrodynamic volume, viscosity, and temperature, it can sense those parameters at the single-particle level. We demonstrate measurements of hot Brownian rotational diffusion of nanorods in temperature and viscosity gradients caused by plasmonic heating. Further, we monitor hydrodynamic volumes of gold nanorods upon addition of very low concentrations of the water-soluble polymer PVA, which binds to the particles, leading to measurable changes in their diffusion constant corresponding to binding of one to a few polymer coils. We propose this analysis technique for very low concentrations of biomolecules in solution.

Ultrasensitive Gas Detection Based on Electrically Enhanced Nanoplasmonic Sensor with Graphene-Encased Gold Nanorod

Nanoplasmonic sensors are a widely known concept and have been studied with various applications. Among them, gas detection is engaging attention in many fields. However, the analysis performance of nanoplasmonic sensors based on refractive index confined to the metal nanostructure characteristics causes challenges in gas detection. In this study, we develop a graphene-encased gold nanorod (AuNR)-based nanoplasmonic sensor to detect cadaverine gas. The graphene-encased AuNR (Gr@AuNR) presents an ultrasensitive peak wavelength shift even with tiny molecules. In addition, the external potential transmitted through graphene induces an additional shift. A chemical receptor is immobilized on Gr@AuNR (CR@Gr@AuNR) for selectively capturing cadaverine. The CR@Gr@AuNR achieves ultrasensitive detection of cadaverine gas, and the detection limit is increased to 15.99 ppb by applying a voltage to graphene. Furthermore, the experimental results of measuring cadaverine generated from spoiled pork show the practicality of CR@Gr@AuNR. The strategy of external-boosted nanoplasmonics provides new insight into plasmonic sensing and applications.

Gold Nanorods as Radiopharmaceutical Carriers: Preparation and Preliminary Radiobiological In Vitro Tests

Low-energy electrons (Auger electrons) can be produced via the interaction of photons with gold atoms in gold nanorods (AuNRs). These electrons are similar to those emitted during the decay of technetium-99m (^99mTc), a radioactive nuclide widely used for diagnostics in nuclear medicine. Auger and internal conversion (IC) electron emitters appropriately targeted to the DNA of tumors cells may, therefore, represent a new radiotherapeutic approach. ^99mTc radiopharmaceuticals, which are used for diagnosis, could indeed be used in theragnostic fields when loaded on AuNRs and delivered to a tumor site. This work aims to provide a proof of concept (i) to evaluate AuNRs as carriers of ^99mTc-based radiopharmaceuticals, and (ii) to evaluate the efficacy of Auger electrons emitted by photon-irradiated AuNRs in inducing radio-induced damage in T98G cells, thus mimicking the effect of Auger electrons emitted during the decay of ^99mTc used in clinical settings. Data are presented on AuNRs' chemical characterization (with an aspect ratio of 3.2 and Surface Plasmon Resonance bands at 520 and 680 nm) and the loading of pharmaceuticals (after ^99mTc decay) on their surface. Spectroscopic characterizations, such as UV-Vis and synchrotron radiation-induced X-ray photoelectron (SR-XPS) spectroscopies, were performed to investigate the drug-AuNR interaction. Finally, preliminary radiobiological data on cell killing with AuNRs are presented.

Site-Specific Chemistry on Gold Nanorods: Curvature-Guided Surface Dewetting and Supracolloidal Polymerization

Control of interparticle interactions in terms of their direction and strength highly relies on the use of anisotropic ligand grafting on nanoparticle (NP) building blocks. We report a ligand deficiency exchange strategy to achieve site-specific polymer grafting of gold nanorods (AuNRs). Patchy AuNRs with controllable surface coverage can be obtained during ligand exchange with a hydrophobic polystyrene ligand and an amphiphilic surfactant while adjusting the ligand concentration (C_PS) and solvent condition (C_water in dimethylformamide). At a low grafting density of ≤0.08 chains/nm², dumbbell-like AuNRs with two polymer domains capped at the two ends can be synthesized through surface dewetting with a high purity of >94%. These site-specifically-modified AuNRs exhibit great colloidal stability in aqueous solution. Dumbbell-like AuNRs can further undergo supracolloidal polymerization upon thermal annealing to form one-dimensional plasmon chains of AuNRs. Such supracolloidal polymerization follows the temperature-solvent superposition principle as revealed by kinetic studies. Using the copolymerization of two AuNRs with different aspect ratios, we demonstrate the design of chain architectures by varying the reactivity of nanorod building blocks. Our results provide insights into the postsynthetic design of anisotropic NPs that potentially serve as units for polymer-guided supracolloidal self-assembly.

Gold-Based Nanostructures for Antibacterial Application

Bacterial infections have become a fatal threat because of the abuse of antibiotics in the world. Various gold (Au)-based nanostructures have been extensively explored as antibacterial agents to combat bacterial infections based on their remarkable chemical and physical characteristics. Many Au-based nanostructures have been designed and their antibacterial activities and mechanisms have been further examined and demonstrated. In this review, we collected and summarized current developments of antibacterial agents of Au-based nanostructures, including Au nanoparticles (AuNPs), Au nanoclusters (AuNCs), Au nanorods (AuNRs), Au nanobipyramids (AuNBPs), and Au nanostars (AuNSs) according to their shapes, sizes, and surface modifications. The rational designs and antibacterial mechanisms of these Au-based nanostructures are further discussed. With the developments of Au-based nanostructures as novel antibacterial agents, we also provide perspectives, challenges, and opportunities for future practical clinical applications.

Large-Area Arrays of Polymer-Tethered Gold Nanorods with Controllable Orientation and Their Application in Nano-Floating-Gate Memory Devices

In this work, it is reported that large-area (centimeter-scale) arrays of non-close-packed polystyrene-tethered gold nanorod (AuNR@PS) can be prepared through a liquid-liquid interfacial assembly method. Most importantly, the orientation of AuNRs in the arrays can be controlled by changing the intensity and direction of electric field applied in the solvent annealing process. The interparticle distance of AuNR can be tuned by varying the length of polymer ligands. Moreover, the AuNR@PS with short PS ligand are favorited to form orientated arrays with the assistance of electric field, while long PS ligands make the orientation of AuNRs difficult. The orientated AuNR@PS arrays are employed as the nano-floating gate of field-effect transistor memory device. Tunable charge trapping and retention characteristics in the device can be realized by electrical pulse with visible light illumination. The memory device with orientated AuNR@PS array required less illumination time (1 s) at the same onset voltage in programming operation, compared to the control device with disordered AuNR@PS array (illumination time: 3 s). Moreover, the orientated AuNR@PS array-based memory device can maintain the stored data for more than 9000 s, and exhibits stable endurance characteristic without significant degradation in 50 programming/reading/erasing/reading cycles.

Smart Delivery Platform Using Core-Shell Nanofibers for Sequential Drug Release in Wound Healing

An effective approach to accelerating wound healing is through a smart delivery platform that releases drugs according to the needs of different healing periods. With the growing demand for wound care and treatment, electrospun nanofibers have attracted considerable attention owing to their simple and versatile method of manufacturing, unique structure, and biological functions similar to those of the extracellular matrix. Moreover, nanofibers can be loaded with active substances that promote targeted wound healing. In this study, we investigated the performance of a core-shell nanofiber platform loaded with two drugs in the core and shell, respectively. The shell polymer, poly-l-lactic acid, initially releases the encapsulated drug into an aqueous solution at room temperature. Gold nanorods with near-infrared absorbance were incorporated in the core polymer poly(N-isopropylacrylamide) to produce localized heat by plasmon resonance when exposed to light. This allows the thermally responsive core polymer to swell and shrink for programmable drug release. Our study provides a versatile platform for controlled and safe drug delivery to wound sites and could be applied to the treatment of other topical diseases.

Black Phosphorus Nanosheets Grafted with Gold Nanorods and Carbon Nanodots for Synergistic Antitumor Therapy

Synergetic photothermal/photodynamic/chemotherapy receives significant attention for precise in vivo cancer treatment. Despite plenty of encouraging photosensitizers explored, integrated nanoagents with multiple functions are still highly desired. In this study, novel nanocomposites coupling black phosphorus (BP) nanosheets, gold nanorods (AuNRs), carbon nanodots (CDs), and doxorubicin (Dox) are prepared. The nanoagents exhibit high antitumor activity on account of their broad light absorption, excellent catalytic ability, and significant photothermal and photodynamic effects. CDs not only emit bright fluorescence for accurate diagnosis and guiding of tumor treatment but also catalyze the generation of ROS for photodynamic therapy (PDT). The released Dox induces apoptosis of cells and increases the levels of H₂O₂ to promote PDT. AuNRs are the main photothermal therapy (PTT) material that converts light into heat. Moreover, BP can be used to enhance both PTT and PDT efficiencies, and the two therapy modes can be cooperatively reinforced. It is also found that the local immune microenvironment of the tumors is activated. The strategy makes good use of the features of each component. Satisfactory antitumor phenomena are well confirmed by in vitro and in vivo results. This study provides new insights into enhanced synergetic therapy, highlighting the great utility of BP-based nanoagents in the field of nanomedicine.

Observation of Enantiomeric Switching of Individual Plasmonic Metamolecules

Active plasmonic metamolecules under microscopic observation are promising for optical reporters in single molecule sensing applications. While self-assembled reconfigurable chiral plasmonic metamolecules can be conveniently engineered with sensing functionalities, their observation is usually based on ensemble measurements, where the chiroptical response of enantiomers tend to cancel each other in ensemble circular dichroism. Herein, we demonstrate microscopic observation of enantiomeric switching of individual active DNA origami-assembled plasmonic metamolecules. The metamolecules are immobilized on a glass substrate in a microfluidic chamber, in which the plasmonic metamolecule can maintain their activities upon certain local stimuli as in solution. In circular differential scattering, two enantiomeric states controlled by the strand-displacement reaction display opposite spectral signals to each other, representing successful enantiomeric switching of the chirality. Moreover, in a close-to-racemic mixture of chiral metamolecules controlled by pH-sensitive strands, the coexistence of enantiomeric individuals, which is concealed in ensemble measurements, is clearly identified.

Nanocomposites Based on Spin-Crossover Nanoparticles and Silica-Coated Gold Nanorods: A Nonlinear Optical Study

A nanocomposite based on silica-coated AuNRs with the aminated silica-covered spin-crossover nanoparticles (SCO NPs) of the 1D iron(II) coordination polymer with the formula [Fe(Htrz)₂(trz)](BF₄) is presented. For the synthesis of the SCO NPs, the reverse micelle method was used, while the gold nanorods (AuNRs) were prepared with the aspect ratio AR = 6.0 using the seeded-growth method and a binary surfactant mixture composed of cetyltrimethylammonium bromide (CTAB) and sodium oleate (NaOL). The final nanocomposite was prepared using the heteroaggregation method of combining different amounts of SCO NPs with the AuNRs. The nonlinear optical (NLO) properties of the hybrid AuNRs coated with different amounts of SCO NPs were studied in detail by means of the Z-scan technique, revealing that the third-order NLO properties of the AuNRs@SCO are dependent on the amount of SCO NPs grafted onto them. However, due to the resonant nature of the excitation, SCO-induced NLO switching was not observed.

Gold Nanorods with Mesoporous Silica Shell: A Promising Platform for Cisplatin Delivery

The versatile combination of metal nanoparticles with chemotherapy agents makes designing multifunctional drug delivery systems attractive. In this work, we reported cisplatin's encapsulation and release profile using a mesoporous silica-coated gold nanorods system. Gold nanorods were synthesized by an acidic seed-mediated method in the presence of cetyltrimethylammonium bromide surfactant, and the silica-coated state was obtained by modified Stöber method. The silica shell was modified first with 3-aminopropyltriethoxysilane and then with succinic anhydride to obtain carboxylates groups to improve cisplatin encapsulation. Gold nanorods with an aspect ratio of 3.2 and silica shell thickness of 14.74 nm were obtained, and infrared spectroscopy and ζ potential studies corroborated surface modification with carboxylates groups. On the other hand, cisplatin was encapsulated under optimal conditions with an efficiency of ~58%, and it was released in a controlled manner over 96 h. Furthermore, acidic pH promoted a faster release of 72% cisplatin encapsulated compared to 51% in neutral pH.

Probing the Protein Folding Energy Landscape: Dissociation of Amyloid-β Fibrils by Laser-Induced Plasmonic Heating

Insoluble amyloid fibrils made from proteins and peptides are difficult to be degraded in both living and artificial systems. The importance of studying their physical stability lies primarily with their association with human neurodegenerative diseases, but also owing to their potential role in multiple bio-nanomaterial applications. Here, gold nanorods (AuNRs) were utilized to investigate the plasmonic heating properties and dissociation of amyloid-β fibrils formed by different peptide fragments (Aβ_16-22/Aβ_25-35/Aβ_1-42) related to the Alzheimer's disease. It is demonstrated that AuNRs were able to break mature amyloid-β fibrils from both the full length (Aβ_1-42) and peptide fragments (Aβ_16-22/Aβ_25-35) within minutes by triggering ultrahigh localized surface plasmon resonance (LSPR) heating. The LSPR energy absorbed by the amyloids to unfold and move to higher levels in the protein folding energy landscape can be measured directly and in situ by luminescence thermometry using lanthanide-based upconverting nanoparticles. We also show that Aβ_16-22 fibrils, with the largest persistence length, displayed the highest resistance to breakage, resulting in a transition from rigid fibrils to short flexible fibrils. These findings are consistent with molecular dynamics simulations indicating that Aβ_16-22 fibrils possess the highest thermostability due to their highly ordered hydrogen bond networks and antiparallel β-sheet orientation, hence affected by an LSPR-induced remodeling rather than melting. The present results introduce original strategies for disassembling amyloid fibrils noninvasively in liquid environment; they also introduce a methodology to probe the positioning of amyloids on the protein folding and aggregation energy landscape via nanoparticle-enabled plasmonic and upconversion nanothermometry.

pH-Sensitive Gold Nanorods for Non-Steroidal Anti-Inflammatory Drugs (NSAIDs) Delivery and DNA-Binding Studies

A facile experimental protocol for the synthesis of poly(ethylene glycol)-modified (PEGylated) gold nanorods (AuNRs@PEG) is presented as well as an effective drug loading procedure using the non-steroidal anti-inflammatory drug (NSAID) naproxen (NAP). The interaction of AuNRs@PEG and drug-loaded AuNRs (AuNRs@PEG@NAP) with calf-thymus DNA was studied at a diverse temperature revealing different interaction modes; AuNRs@PEG may interact via groove-binding and AuNRs@PEG@NAP may intercalate to DNA-bases. The cleavage activity of the gold nanoparticles for supercoiled circular pBR322 plasmid DNA was studied by gel electrophoresis while their affinity for human and bovine serum albumins was also evaluated. Drug-release studies revealed a pH-sensitive behavior with a release up to a maximum of 24% and 33% NAP within the first 180 min at pH = 4.2 and 6.8, respectively. The cytotoxicity of AuNRs@PEG and AuNRs@PEG@NAP was evaluated against MCF-7 and MDA-MB-231 breast cancer cell lines. The development of AuNRs as an efficient non-steroidal anti-inflammatory drugs (NSAIDs) delivery system for chemotherapy is still in its infancy. The present work can shed light and inspire other research groups to work in this direction.

Heading toward Miniature Sensors: Electrical Conductance of Linearly Assembled Gold Nanorods

Metal nanoparticles are increasingly used as key elements in the fabrication and processing of advanced electronic systems and devices. For future device integration, their charge transport properties are essential. This has been exploited, e.g., in the development of gold-nanoparticle-based conductive inks and chemiresistive sensors. Colloidal wires and metal nanoparticle lines can also be used as interconnection structures to build directional electrical circuits, e.g., for signal transduction. Our scalable bottom-up, template-assisted self-assembly creates gold-nanorod (AuNR) lines that feature comparably small widths, as well as good conductivity. However, the bottom-up approach poses the question about the consistency of charge transport properties between individual lines, as this approach leads to heterogeneities among those lines with regard to AuNR orientation, as well as line defects. Therefore, we test the conductance of the AuNR lines and identify requirements for a reliable performance. We reveal that multiple parallel AuNR lines (>11) are necessary to achieve predictable conductivity properties, defining the level of miniaturization possible in such a setup. With this system, even an active area of only 16 µm² shows a higher conductance (~10^-5 S) than a monolayer of gold nanospheres with dithiolated-conjugated ligands and additionally features the advantage of anisotropic conductance.

Poly(N-vinylcaprolactam)-Gold Nanorods-5 Fluorouracil Hydrogels: In the Quest of a Material for Topical Therapies against Melanoma Skin Cancer

Chemically crosslinked hydrogels based on poly(N-vinylcaprolactam) (PNVCL) were synthetized by a photoinitiated chemical method. A galactose-based monomer, 2-lactobionamidoethyl methacrylate (LAMA), and N-vinylpyrrolidone (NVP) were added with the aim to improve the physical and chemical properties of hydrogels. The effects of both comonomers on the swelling ratio (Q), volume phase transition temperature (VPTT), glass transition temperature (T_g), and Young's moduli by mechanical compression below and above the VPTT were studied. Gold nanorods (GNRDs) and 5-fluorouracil (5FU) were embedded into the hydrogels, to study the drug release profiles with and without the excitation of GNRDs by irradiation in the near-infrared region (NIR). Results showed that the addition of LAMA and NVP increased the hydrogels' hydrophilicity, elasticity, and VPTT. The loading of GNRDs in the hydrogels changed the release rate of 5FU when irradiated intermittently with an NIR laser. The present study reports on the preparation of a hydrogel-based platform of PNVCL-GNRDs-5FU as a potential hybrid anticancer hydrogel for chemo/photothermal therapy that could be applied against skin cancer for topical 5FU delivery.

Combining Acoustic Bioprinting with AI-Assisted Raman Spectroscopy for High-Throughput Identification of Bacteria in Blood

Identifying pathogens in complex samples such as blood, urine, and wastewater is critical to detect infection and inform optimal treatment. Surface-enhanced Raman spectroscopy (SERS) and machine learning (ML) can distinguish among multiple pathogen species, but processing complex fluid samples to sensitively and specifically detect pathogens remains an outstanding challenge. Here, we develop an acoustic bioprinter to digitize samples into millions of droplets, each containing just a few cells, which are identified with SERS and ML. We demonstrate rapid printing of 2 pL droplets from solutions containing S. epidermidis, E. coli, and blood; when they are mixed with gold nanorods (GNRs), SERS enhancements of up to 1500× are achieved.We then train a ML model and achieve ≥99% classification accuracy from cellularly pure samples and ≥87% accuracy from cellularly mixed samples. We also obtain ≥90% accuracy from droplets with pathogen:blood cell ratios <1. Our combined bioprinting and SERS platform could accelerate rapid, sensitive pathogen detection in clinical, environmental, and industrial settings.

Combination d-Amino Acid and Photothermal Hydrogel for the Treatment of Prosthetic Joint Infections

Prosthetic joint infection (PJI) is a devastating complication requiring surgical intervention and prolonged antimicrobial treatment. The prevalence of PJI is on the rise, with an average incidence of 60,000 cases per year and a projected annual cost of $1.85 billion in the US. The underlying pathogenesis of PJI involves the formation of bacterial biofilms that protect the pathogen from the host immune response and antibiotics, making it difficult to eradicate such infections. Biofilms on implants are also resistant to mechanical brushing/scrubbing methods of removal. Since the removal of biofilms is currently only achievable by the replacement of the prosthesis, therapies aimed at eradicating biofilms while enabling retention of implants will revolutionize the management of PJIs. To address severe complications associated with biofilm-related infections on implants, we have developed a combination treatment that is based on a hydrogel nanocomposite system, containing d-amino acids (d-AAs) and gold nanorods, which can be delivered and transforms from a solution to a gel state at physiological temperature for sustained release of d-AAs and light-activated thermal treatment of infected sites. Using this two-step approach to utilize a near-infrared light-activated hydrogel nanocomposite system for thermal treatment, following initial disruption with d-AAs, we were able to successfully demonstrate in vitro the total eradication of mature Staphylococcus aureus biofilms grown on three-dimensional printed Ti-6Al-4V alloy implants. Using a combination of cell assays, computer-aided scanning electron microscopy analyses, and confocal microscopy imaging of the biofilm matrix, we could show 100% eradication of the biofilms using our combination treatment. In contrast, we were only able to see 25% eradication of the biofilms using the debridement, antibiotics, and implant retention method. Moreover, our hydrogel nanocomposite-based treatment approach is adaptable in the clinical setting and capable of combating chronic infections brought about by biofilms on medical implants.

Development of Nanocarrier-Based Radionuclide and Photothermal Therapy in Combination with Chemotherapy in Melanoma Cancer Treatment

Conventional cancer therapy methods have serious drawbacks that are related to the nonspecific action of anticancer drugs that leads to high toxicity on normal cells and increases the risk of cancer recurrence. The therapeutic effect can be significantly enhanced when various treatment modalities are implemented. Here, we demonstrate that the radio- and photothermal therapy (PTT) delivered through nanocarriers (gold nanorods, Au NRs) in combination with chemotherapy in a melanoma cancer results in complete tumor inhibition compared to the single therapy. The synthesized nanocarriers can be effectively labeled with 188Re therapeutic radionuclide with a high radiolabeling efficiency (94-98%) and radiochemical stability (>95%) that are appropriate for radionuclide therapy. Further, 188Re-Au NRs, mediating the conversion of laser radiation into heat, were intratumorally injected and PTT was applied. Upon the irradiation of a near-infrared laser, dual photothermal and radionuclide therapy was achieved. Additionally, the combination of 188Re-labeled Au NRs with paclitaxel (PTX) has significantly improved the treatment efficiency (188Re-labeled Au NRs, laser irradiation, and PTX) compared to therapy in monoregime. Thus, this local triple-combination therapy can be a step toward the clinical translation of Au NRs for use in cancer treatment.

Thermal Effect during Laser-Induced Plasmonic Heating of Polyelectrolyte-Coated Gold Nanorods in Well Plates

We examined the generation and transfer of heat when laser irradiation is applied to water containing a suspension of gold nanorods coated with different polyelectrolytes. The ubiquitous well plate was used as the geometry for these studies. The predictions of a finite element model were compared to experimental measurements. It is found that relatively high fluences must be applied in order to generate biologically relevant changes in temperature. This is due to the significant lateral heat transfer from the sides of the well, which strongly limits the temperature that can be achieved. A 650 mW continuous-wave (CW) laser, with a wavelength that is similar to the longitudinal plasmon resonance peak of the gold nanorods, can deliver heat with an overall efficiency of up to 3%. This is double the efficiency achievable without the nanorods. An increase in temperature of up to 15 °C can be achieved, which is suitable for the induction of cell death by hyperthermia. The nature of the polymer coating on the surface of the gold nanorods is found to have a small effect.

Selective Photothermal Therapy Based on Lipopolysaccharide Aptamer Functionalized MoS2 Nanosheet-Coated Gold Nanorods for Multidrug-Resistant Pseudomonas aeruginosa Infection

Chronic wounds infected by multidrug-resistant gram-negative bacteria have evolved resistance to traditional antibiotic therapy, posing a threat to global public health in recent years. Herein, a selective therapeutic nanorod (MoS₂ -AuNRs-apt) based on molybdenum disulfide (MoS₂ ) nanosheets coated gold nanorods (AuNRs) targeting lipopolysaccharide (LPS) is presented. AuNRs have excellent photothermal conversion efficiency in 808 nm laser-guided photothermal therapy (PTT), and the MoS₂ nanosheets coating significantly enhances the biocompatibility of AuNRs. Furthermore, the conjugation of the nanorods with aptamer permits active targeting of LPS on the surface of gram-negative bacteria and a specific anti-inflammatory ability in the multidrug-resistant Pseudomonas aeruginosa (MRPA)-infected wound murine model. It is concluded that the antimicrobial effect of these nanorods is considerably more significant than non-targeted PTT. Moreover, they can precisely overcome MRPA bacteria by physical damage and effectively reduce excess M1 inflammatory macrophages to accelerate the healing of infected wounds. Overall, this molecular therapeutic strategy displays great potential as a prospective antimicrobial treatment for MRPA infections.

Activity of Retinal Neurons Can Be Modulated by Tunable Near-Infrared Nanoparticle Sensors

The vision of patients rendered blind by photoreceptor degeneration can be partially restored by exogenous stimulation of surviving retinal ganglion cells (RGCs). Whereas conventional electrical stimulation techniques have failed to produce naturalistic visual percepts, nanoparticle-based optical sensors have recently received increasing attention as a means to artificially stimulate the RGCs. In particular, nanoparticle-enhanced infrared neural modulation (NINM) is a plasmonically mediated photothermal neuromodulation technique that has a demonstrated capacity for both stimulation and inhibition, which is essential for the differential modulation of ON-type and OFF-type RGCs. Gold nanorods provide tunable absorption through the near-infrared wavelength window, which reduces interference with any residual vision. Therefore, NINM may be uniquely well-suited to retinal prosthesis applications but, to our knowledge, has not previously been demonstrated in RGCs. In the present study, NINM laser pulses of 100 μs, 500 μs and 200 ms were applied to RGCs in explanted rat retinae, with single-cell responses recorded via patch-clamping. The shorter laser pulses evoked robust RGC stimulation by capacitive current generation, while the long laser pulses are capable of inhibiting spontaneous action potentials by thermal block. Importantly, an implicit bias toward OFF-type inhibition is observed, which may have important implications for the feasibility of future high-acuity retinal prosthesis design based on nanoparticle sensors.