Sensitive aptamer-based fluorescene assay for ochratoxin A based on RNase H signal amplification

Detection of coralyne and heparin by polymerase extension reaction using SYBR Green I

Polydeoxyadenosine (poly (dA)) has been extensively applied for detecting many drug molecules. Herein, we developed a sensitive method for detecting coralyne and heparin using a modified DNA probe with poly (dA) at one end. In the absence of coralyne, the DNA probe was digested by the Exonuclease I (Exo I), and therefore the SYBR Green I (SG I) emitted an extremely low fluorescent signal. While coralyne specifically binding to poly (dA) with strong propensity could remarkably restrain the disintegration of the DNA probe, through which as a template the second strand of DNA sequence was formed with the introduction of DNA polymerase. Therefore, the fluorescent signal of SG I was intensified to quantify coralyne. Based on this method, heparin can be determined due to its strong affinity towards coralyne. This method showed a linear range from 2 to 500 nM for coralyne with a low detection limit of 0.98 nM, and the linear range of heparin was from 1 to 100 nM when 1.25 nm was the detection limit. The proposed method was also implemented successfully in biological samples and showed a potential application for screening potential therapeutic molecules.

Selection and application of ssDNA aptamers against spermine based on Capture-SELEX

Spermine contamination ranks as one of the food safety issues, it will cause some adverse reactions if the intake of spermine is excessive in human body. So it is of great significance to establish fast and efficient analysis method to detect spermine in foods. In this study, the spermine aptamers with high affinity and specificity were obtained by the capture systematic evolution of ligands by exponential enrichment (Capture-SELEX) technique. Forty-one aptamer sequences were obtained by cloning and sequencing, and were divided into eight families based on homology and secondary structure analysis. The affinity and specificity of candidate aptamers was analyzed by isothermal titration calorimetry (ITC) and fluorescence assay. The aptamers named APJ-6 was picked out as the optimal aptamer that recognizes spermine specifically with the Kd value of 9.648 ± 0.896 nM. In order to verify the practicability of the selected aptamers, the sensitive aptamer-based fluorescene assay was designed. Under optimized conditions, this aptasensor exhibited a low detection limit of 0.052 nM, as well as a linear within the range of 0.1-20 nM. Besides, it has been further applied for the determination of spermine in pork samples and the recoveries ranged from 86.45% to 98.15%, showing its great potential for sensitive analysis in food safety control.

Amplified colorimetric detection of tetracycline based on an enzyme-linked aptamer assay with multivalent HRP-mimicking DNAzyme

Tetracycline (TC) is widely used to treat bacterial infections in humans and animals due to its low price and good antibacterial properties. The abuse of tetracycline has led to TC residues in daily food that could seriously affect human health. Thus, it is imperative to develop highly sensitive and selective methods for TC detection. In this work, we developed a colorimetric method for TC detection based on an enzyme-linked aptamer assay (ELAA) with multivalent HRP-mimicking DNAzyme. An aptamer was used as an alternative recognition element in the enzyme-linked immunosorbent assay (ELISA). Multivalent HRP-mimicking DNAzyme, assembled via hybridization chain reactions (HCR), was used for catalytic substrate color rendering in ELAA. The multivalent HRP-mimicking DNAzyme exhibited enhanced catalytic capacity and improved the detection sensitivity greatly. The limit of detection was 8.1 × 10-2 ng mL-1 with a linear range from 1.0 × 10-2 ng mL-1 to 1.0 × 104 ng mL-1 toward TC in buffer. To challenge the practical application capability of this strategy, the detection of TC in milk samples was also investigated and showed similar linear relationships. Due to the introduction of an aptamer, this ELAA strategy shows high selectivity towards TC and has potential for the detection of a wide spectrum of analytes.

Exonuclease III-assisted fluorometric aptasensor for the carcinoembryonic antigen using graphene oxide and 2-aminopurine

A reliable fluorometric assay is described for the determination carcinoembryonic antigen (CEA) using exonuclease III (Exo III) and a 2-aminopurine binding aptamer. In the absence of CEA, dsDNA is degraded by Exo III, and free 2-AP (which has a blue fluorescence with excitation/emission maxima of 310/365 nm) is released. Strong fluorescence is generated after addition of graphene oxide (GO) to the solution. However, the 2-AP modified DNA (T2) cannot be degraded in the presence of CEA by Exo III due to the interaction between CEA and aptamer T1. Hence, only weak fluorescence can be detected after addition of GO. In this system, CEA can be quantified in the 0.05 - 2 ng·mL^-1 concentration range with a detection limit of 30 pg·mL^-1 (at S/N = 3). The method was successfully applied to analyze serum samples for CEA. Graphical Abstract An exonuclease III-assisted fluorometric aptasensor has been developed for the detection of carcinoembryonic antigen using graphene oxide and 2-aminopurine.

Target-Activated DNA Polymerase Activity for Sensitive RNase H Activity Assay

Herein, the ribonuclease H (RNase H) activity assay based on the target-activated DNA polymerase activity is described. In this method, a detection probe composed of two functional sequences, a binding site for DNA polymerase and a catalytic substrate for RNase H, serves as a key component. The detection probe, at its initial state, suppresses the DNA polymerase activity, but it becomes destabilized by RNase H, which specifically hydrolyzes RNA in RNA/DNA hybrid duplexes. As a result, DNA polymerase recovers its activity and initiates multiple primer extension reactions in a separate TaqMan probe-based signal transduction module, leading to a significantly enhanced fluorescence "turn-on" signal. This assay can detect RNase H activity as low as 0.016 U mL^-1 under optimized conditions. Furthermore, its potential use for evaluating RNase H inhibitors, which have been considered potential therapeutic agents against acquired immune deficiency syndrome (AIDS), is successfully explored. In summary, this approach is quite promising for the sensitive and accurate determination of enzyme activity and inhibitor screening.

Primer remodeling amplification-activated multisite-catalytic hairpin assembly enabling the concurrent formation of Y-shaped DNA nanotorches for the fluorescence assay of ochratoxin A

DNA can be configured into unique high-order structures due to its significantly high programmability, such as a three-way junction-based structure (denoted Y-shaped DNA), for further applications. Herein, we report a label-free fluorescent signal-on biosensor based on the target-driven primer remodeling rolling circle amplification (RCA)-activated multisite-catalytic hairpin assembly (CHA) enabling the concurrent formation of Y-shaped DNA nanotorches (Y-DNTs) for ultrasensitive detection of ochratoxin A (OTA). Two kinds of masterfully-designed probes, termed Complex I and II, were pre-prepared by the combination of a circular template (CT) with an OTA aptamer (S1), a substrate probe (S2) and hairpin probe 1 (HP1), respectively. Target OTA specifically binds to Complex I, resulting in the release of the remnant element in S2 and successive remodeling into a mature primer for RCA by phi29 DNA polymerase, thus a usable primer-CT complex is produced, which actuates primary RCA. Then, numerous Complex II probes can anneal with the first-generation RCA product (RP) with multiple sites to activate the CHA process. With the participation of endonuclease IV (Endo IV) and phi29, HP1 as a pre-primer containing a tetrahydrofuran abasic site mimic (AP site) in Complex II is converted into a mature primer to initiate additional rounds of RCA. So, countless Y-DNTs are formed concurrently containing a G-quadruplex structure that enables the N-methylmesoporphyrin IX (NMM) to be embedded, generating remarkably strong fluorescence signals. The biosensor was demonstrated to enable rapid and accurate highly efficient and selective detection of OTA with an improved detection limit of as low as 0.0002 ng mL^-1 and a widened dynamic range of over 4 orders of magnitude. Meanwhile, this method was proven to be capable of being used to analyze actual samples. Therefore, this proposed strategy may be established as a useful and practical platform for the ultrasensitive detection of mycotoxins in food safety testing.

An exonuclease-assisted fluorescence sensor for assaying alkaline phosphatase based on SYBR Green I

In this report, we propose a fast, reliable and convenient approach to determine the alkaline phosphatase (ALP) activity based on a label-free fluorescence strategy. Upon catalysis of ALP, dephosphorylated dsDNA hampers the λ exonuclease (λexo) cleavage, shows high affinity to SYBR Green I (SG I), resulting in a strong fluorescence emission peak at 520 nm. In the absence of ALP, the dsDNA with 5'-phosphoryl-termini could be employed as a substrate of λexo. After cleavage, a weak fluorescence emission peaks at 520 nm could be observed. The assay was both selective and sensitive, and the detection limit was found to be as low as 3 U/L. This method was utilized to evaluate Na₃VO₄ as ALP inhibitor. The method was successfully applied to the determination of the activity of ALP in spiked human serum samples.

Fluorescent Method for the Detection of Biothiols Using an Ag⁺-Mediated Conformational Switch

In this work, a novel, simple, and time-saving fluorescence approach for the detection of biothiols (glutathione and cysteine) was developed by employing a DNA probe labeled with 2-aminopurine. As an adenine analogue, 2-aminopurine exhibits high fluorescence intensity that can be rapidly quenched in the presence of DNA. In the presence of Ag⁺, the fluorescence increased significantly, which was a result of the formation of cytosine–Ag⁺–cytosine base pairs and the release of 2-aminopurine. Upon addition of either glutathione or cysteine, the structure of cytosine–Ag⁺–cytosine was disrupted, a product of the stronger affinity between biothiols and Ag⁺. As a result, the 2-aminopurine-labeled DNA probe returned to its former structure, and the fluorescence signal was quenched accordingly. The detection limit for glutathione and cysteine was 3 nM and 5 nM, respectively. Furthermore, the determination of biothiols in human blood serum provided a potential application for the probe as a diagnostic tool in clinical practice.

Aptamer-Based Fluorometric Ochratoxin A Assay Based on Photoinduced Electron Transfer

This study describes a novel quencher-free fluorescent method for ochratoxin A (OTA) detection based on the photoinduced electron transfer (PIET) between guanine and fluorophore. In the absence of OTA, carboxyfluorescein (FAM)-labeled aptamer can partly hybridize with the complementary strand of OTA aptamer (OTA-cAPT), which contains four guanines at its 3′-end. As a result, the fluorescence of FAM is quenched due to PIET and stacked guanines. In the presence of OTA, FAM-labeled OTA aptamer can bind specifically to OTA, and thereby the high fluorescence intensity of the dye can be maintained. Under the optimal conditions, the method had a detection limit of 1.3 nM. In addition, the method we proposed is highly sensitive and specific for OTA. Furthermore, the method was proven to be reliable based on its successful application in the detection of OTA in red wine samples. Therefore, this promising, facile, and quencher-free method may be applied to detect other toxins by using other appropriate aptamers.

Fluorometric determination of the activity of uracil-DNA glycosylase by using graphene oxide and exonuclease I assisted signal amplification

The base-excision repair enzyme uracil-DNA glycosylase (UDG) plays a crucial role in the maintenance of genome integrity. The authors describe a fluorometric method for the detection of the activity of UDG. It is making use of (a) a 3'-FAM-labeled hairpin DNA probe with two uracil deoxyribonucleotides in the self-complementary duplex region of its hairpin structure, (b) exonuclease I (Exo I) that catalyzes the release of FAM from the UDG-induced stretched ssDNA probe, and (c) graphene oxide that quenches the green FAM fluorescence of the intact hairpin DNA probe in the absence of UDG. If Exo I causes the release of FAM from the hairpin DNA probe, the fluorescence peaking at 517 nm is turned off in the absence of UDG but turned on in its presence. The resulting assay has a wide linear range (0.008 to 1 U·mL^-1) and a detection limit as low as 0.005 U·mL^-1. It has good specificity for UDG over potentially interfering enzymes and gave satisfactory results when applied to biological samples. Conceivably, the method may be used in a wide range of applications such as in diagnosis, drug screening, and in studying the repair of DNA lesions. Graphical abstract Schematic presentation of a fluorometric strategy for detection of the activity of uracil-DNA glycosylase by using on graphene oxide and exonuclease I assisted signal amplification.

A sensitive cyclic signal amplification fluorescence strategy for determination of methyltransferase activity based on graphene oxide and RNase H

A sensitive fluorometric method for DNA methyltransferase activity detection based on graphene oxide and RNase H-assisted signal amplification.

A novel fluorometric method for inorganic pyrophosphatase detection based on G-quadruplex-thioflavin T

In this paper, we propose a fluorometric approach for the highly sensitive detection of inorganic pyrophosphatase (PPase) based on G-quadruplex-thioflavin T (ThT). In the absence of PPase, Cu²⁺ can coordinate with pyrophosphate (PPi) to generate a Cu²⁺/PPi complex. Then the G-rich sequence folds into the G-quadruplex structure, which can combine with ThT to generate a remarkable fluorescent signal. In the presence of PPase, the coordinated compound can be destroyed by the PPase catalyzed hydrolysis of PPi into inorganic phosphate (Pi). The subsequent release of Cu²⁺ can compete with ThT to induce a tighter G-quadruplex structure, causing the release of ThT and a sharp fluorescence decrease. Based on this mechanism, a facile and quantitative strategy for PPase detection was developed. The fluorescence intensity of the system shows a linear relationship with the PPase activities in the range of 0.5-30 U/L with a detection limit as low as 0.48 U/L. The proposed strategy for fluorescence spectrometric PPase detection is convenient, cost effective, and sensitive. This can be utilized to evaluate the inhibition effect of NaF on PPase as well as diagnose PPase-related diseases.