Effect of extrusion on the anti-nutritional factors of food products: An overview

Changes in Anti-nutritional Factors and Functional Properties of Extruded Composite Flour

Background: Development of complementary foods by mixing plant-based (cereals, pulses, oilseeds, and others) ingredients and employing various processing techniques is widely reported. However, information on comparison of anti-nutritional factors and functional properties of extruded and unextruded complementary flours made from a multi-mix is limited. In this regard, this study aims to investigate the influence of extrusion cooking on anti-nutritional and functional properties of newly developed extruded oats, soybean, linseed, and premix composite complementary flours.

Methods: Thirteen different blending ratios of oats, soybean, linseed, and premix were generated using a constrained D-optimal design of the experiment. Each of the 13 blends was divided into two groups: extrusion cooked and unextruded composite flour sample. Anti-nutritional and functional properties were determined using standard methods for both composite flours. ANOVA was used to determine if there was a significant difference for extruded and unextruded composite flours and paired t-tests were used to check variation between extruded and unextruded.

Results: The phytate content of the extruded and unextruded composite flours was 158.93–191.33 mg/100 g and 175.06–203.10 mg/100 g, respectively, whereas the tannin content of the extruded and unextruded composite flours was 8.4–22.89 mg/100 g and 23.67–36.97 mg/100 g, respectively. There was a statistically significant (p < 0.05) difference among the extruded composite flours in terms of phytate and condensed tannin content. Paired t-test has indicated a significant (p < 0.05) difference between extruded and unextruded composite flours for phytate and tannin. Water absorption capacity and bulk density have shown a significant (p < 0.05) difference among extruded and unextruded composite flours. An increase in the proportion of soybean and linseed flour was associated with an increase in phytate, tannin, and water absorption capacity of composite flours. However, bulk density was increased with an increasing proportion of oat in the blend.

Conclusion: The findings revealed that extrusion cooking significantly reduced phytate and condensed tannin content and improved the functional properties of the composite complementary food flour. Further investigation is needed on other anti-nutritional factors that are not included in this report.

Effect of selected parameters on sectional expansion index and bulk density during the extrusion of chickpea instant semolina

A four-factor Response surface methodology central composite rotatable design was used to study the effect of moisture content, barrel temperature, screw speed, and feed screw speed on sectional expansion index and bulk density during extrusion of chickpea instant semolina for the purpose of instant product. The regression models for the investigated responses were highly significant (according to P-value) with satisfactory coefficients of determination (R2) 0.894 and 0.957. These results show that the predicted models for the investigated responses are adequate, indicating that the second-order polynomial model could be effectively used to represent the relationship between the selected parameters. The study showed that the expansion was influenced by moisture and temperature and it increased with increasing temperature for moisture content from 20 to 23% and after that decreased. Bulk density decreased with increasing feed moisture and barrel temperature in the extruder. The most important consequences for the science and practice resulting from the conducted research are that the resulting extrudates after grinding can be successfully used for the preparation of instant product with good characteristics, such as bulk density and sectional expansion index.

Descriptive sensory analysis of instant porridge from stored wholegrain and decorticated pearl millet flour cooked, stabilized and improved by using a low-cost extruder

Pearl millet flour, particularly wholegrain flour, is highly susceptible to development of rancid aromas and flavors during storage. Grain decortication and extrusion cooking using a friction-heated single-screw extruder were investigated as potential flour stabilization processes. Raw and extruded wholegrain and decorticated grain pearl millet flours were stored at ambient (25°C) and elevated (40°C) temperatures for 6 months. A trained descriptive sensory panel developed a lexicon of 44 attributes to profile the aroma, flavor, and texture of porridges prepared from the flours. Grain decortication alone did not show an effect on the aroma and flavor profile of porridge. Extrusion cooking of both wholegrain and decorticated flours increased cereal-like aromas (branny, canned sweetcorn, sweet, and wheaty) and flavor (starchy), as well as stiffness and cohesiveness of the porridges. The porridges from the extruded pearl millet flours stored for up to 6 months at ambient and elevated temperatures did not show any indications of rancidity. In contrast, rancidity-associated aromas (chemical, painty, and soapy) and flavor (chemical) increased in porridges from the raw flours stored for 4 weeks and longer. These results indicate that grain decortication did not sufficiently reduce fat content to prevent oxidation, while extrusion cooking stabilized the pearl millet flours. In addition, intensified "cereal-like" aromas and flavors were probably due to Maillard reactions occurring during extrusion cooking. Resulting aroma compounds could have been immobilized in the extruded matrix and not released during flour storage. The application of extrusion cooking with a simple friction-heated single-screw extruder is a viable process for both precooking and extending the shelf life of pearl millet flours. PRACTICAL APPLICATION: This study demonstrates the potential of extrusion cooking to precook wholegrain pearl millet while preventing fat rancidity in wholegrain pearl millet flour, thereby improving the sensory quality and stability of pearl millet food products. The extensive sensory characterization of pearl millet porridge-type foods can serve as a guidance tool for development, improvement, and quality control of pearl millet foods. Furthermore, it establishes the efficacy of simple friction-heated, single-screw extruders for commercial manufacture of ready-to-eat wholegrain pearl millet food products by small and medium scale entrepreneurs.

Pulse-based snacks as functional foods: Processing challenges and biological potential

Despite their high nutritional value and potential health benefits, pulse intake has not increased in the last three decades. Several strategies have been implemented to increase pulse consumption, such as their incorporation in bakery products, breakfast cereals, and snacks. The inclusion of pulses in these products could be an alternative to satisfy the consumers' demand for healthy foods. However, pulse-based snacks face important challenges, including reducing antinutritional factors, achieving consumer acceptance, and consolidating the pulse-based snacks as functional foods. This review summarizes and discusses methods for producing snacks where cereals or tubers were replaced with at least 50% pulses. Also, it briefly assesses their effect on nutritional composition, antinutritional factors, sensory acceptance, and different health benefits evaluations. Extruded snacks exhibited high protein and dietary fiber and low fat content, contrary to the high fat content of deep fat-fried snacks. Meanwhile, baked snacks presented moderate concentrations of protein, dietary fiber, and lipids. Pulses must be pretreated using process combinations such as soaking, dehulling, cooking, fermentation, germination, and extrusion to reduce the antinutritional factors. Pulse-based snacks show good sensory acceptance. However, sensory evaluation should be more rigorous using additional untrained judges. Several studies have evaluated the health benefits of pulse-based snacks. More research is needed to validate scientifically the health benefits associated with their consumption. Pulse-based snacks could be an alternative to improve the nutritional composition of commercially available snacks. The use of pulses as ingredients of healthier snacks represents an important alternative for the food industry due to their low cost, sensory characteristics, high nutritional profile, and environmental benefits.

Dietary Fiber and Prebiotic Compounds in Fruits and Vegetables Food Waste

The fruits and vegetables processing industry is one of the most relevant food by-products, displaying limited commercial exploitation entailing economic and environmental problems. However, these by-products present a considerable amount of dietary fiber and prebiotics with important biological activities, such as gut microbiota modulation, lowering the glycemic load and replacing some unhealthy ingredients with an impact on food texture. Therefore, the international scientific community has considered incorporating their extracts or powders to preserve or fortify food products an area of interest, mainly because nowadays consumers demand the production of safer and health-promoting foods. In the present review, literature, mainly from the last 5 years, is critically analyzed and presented. A particular focus is given to utilizing the extracted dietary fibers in different food products and their impact on their characteristics. Safety issues regarding fruits and vegetables wastes utilization and anti-nutritional compounds impact were also discussed.

Wheat Bran Modifications for Enhanced Nutrition and Functionality in Selected Food Products

The established use of wheat bran (WB) as a food ingredient is related to the nutritional components locked in its dietary fibre. Concurrently, the technological impairment it poses has impeded its use in product formulations. For over two decades, several modifications have been investigated to combat this problem. Ninety-three (93) studies (review and original research) published in English between January 1997 and April 2021 reporting WB modifications for improved nutritional, structural, and functional properties and prospective utilisation in food formulations were included in this paper. The modification methods include mechanical (milling), bioprocessing (enzymatic hydrolysis and fermentation with yeasts and bacteria), and thermal (dry heat, extrusion, autoclaving), treatments. This review condenses the current knowledge on the single and combined impact of various WB pre-treatments on its antioxidant profile, fibre solubilisation, hydration properties, microstructure, chemical properties, and technological properties. The use of modified WB in gluten-free, baked, and other food products was reviewed and possible gaps for future research are proposed. The application of modified WB will have broader application prospects in food formulations.

Technological properties of chickpea (Cicer arietinum): Production of snacks and health benefits related to type-2 diabetes

Chickpea (Cicer arietinum) is one of the most consumed pulses worldwide (over 2.3 million tons enter the world market annually). Some chickpea components have shown, in preclinical and clinical studies, several health benefits, including antioxidant capacity, and antifungal, antibacterial, analgesic, anticancer, antiinflammatory, and hypocholesterolemic properties, as well as angiotensin I-converting enzyme inhibition. In the United States, chickpea is consumed mostly in the form of hummus. However, the development of new products with value-added bioactivity is creating new opportunities for research and food applications. Information about bioactive compounds and functional properties of chickpea ingredients in the development of new products is needed. The objective of this review was to summarize available scientific information, from the last 15 years, on chickpea production, consumption trends, applications in the food industry in the elaboration of plant-based snacks, and on its bioactive compounds related to type 2 diabetes (T2D). Areas of opportunity for future research and new applications of specific bioactive compounds as novel food ingredients are highlighted. Research is key to overcome the main processing obstacles and sensory challenges for the application of chickpea as ingredient in snack preparations. The use of chickpea bioactive compounds as ingredient in food products is also a promising area for accessibility of their health benefits, such as the management of T2D.

Extrusion Process as an Alternative to Improve Pulses Products Consumption. A Review

The development of new food products obtained by extrusion processing has increased in recent years. Extrusion is used by the food industry to produce a wide variety of food products, such as ready-to-eat foods (e.g., snacks), among others. Pulses have also gained popularity as novel food ingredients in the formulation of a variety of food and food products, due to their high content of macro and micronutrients, and bioactive compounds that improve the nutritional and functional properties of the final food products. In this review, the impact of extrusion variables on proteins, carbohydrates, vitamins, phenolics and antinutritional compounds in pulses and pulse-based formulations are highlighted. Particularly, the impact of the specific mechanical energy. Also, the preservation, increase and/or reduction in those functional compounds, as a consequence of different extrusion processing conditions, are discussed.

Nutritional Quality and Safety of Complementary Foods Developed from Blends of Staple Grains and Honey Bee Larvae (Apis mellifera)

Complementary foods must be adequate to satisfy the nutritional needs of the growing child together with breastfeeding. This study was aimed at evaluating the nutritional composition, microbial safety, and sensory quality of extruded complementary foods developed from blends of staple grains and insect bee larva (Apis mellifera). Teff, maize, soybean, and bee larva samples were milled to flour and blended before extrusion as follows: ComF01 (57% maize, 29% teff, and 14% soybean) and ComF02 (58% maize, 29% teff, and 13% bee larvae) using NutriSurvey software (version, 2007). Nutrient composition, microbial, and sensory analyses of developed flour blends were conducted using standard methods. The proximate composition of moisture, fat, fiber, carbohydrate, and energy was significantly different between the developed and commercial wean-mix foods. ComF02 recorded the highest fat content (14.3 g/100 g), energy (427.18 kcal/100 g), and vitamins A (706 μg/100 g), B3 (8.2 mg/100 g), and B9 (86.7 mg/100 g) while ComF01 had the highest protein content (12.56 g/100 g). Iron (40.94 mg/100 g) and calcium (68.20 mg/100 g) were the minerals with the highest content in ComF02. Both ComF01 and ComF02 met the recommended dietary allowance of nutrients for infants aged 6-12 months. Overall, the present study showed that bee larvae can be used to develop complementary foods that are nutritionally adequate, microbiologically safe, and sensory acceptable meeting the dietary allowance of infants at an acceptable level compared to conventional cereal-based foods.

Soy Protein: Molecular Structure Revisited and Recent Advances in Processing Technologies

Rising health concerns and increasing obesity levels in human society have led some consumers to cut back on animal protein consumption and switch to plant-based proteins as an alternative. Soy protein is a versatile protein supplement and contains well-balanced amino acids, making it comparable to animal protein. With sufficient processing and modification, the quality of soy protein can be improved above that of animal-derived proteins, if desired. The modern food industry is undergoing a dynamic change, with advanced processing technologies that can produce a multitude of foods and ingredients with functional properties from soy proteins, providing consumers with a wide variety of foods. This review highlights recent progress in soy protein processing technologies. Using the current literature, the processing-induced structural changes in soy protein are also explored. Furthermore, the molecular structure of soy protein, particularly the crystal structures of β-conglycinin and glycinin, is comprehensively revisited.

Autoclaved and Extruded Legumes as a Source of Bioactive Phytochemicals: A Review

Legumes have been consumed since ancient times all over the world due to their easy cultivation and availability as a low-cost food. Nowadays, it is well known that pulses are also a good source of bioactive phytochemicals that play an important role in the health and well-being of humans. Pulses are mainly consumed after processing to soften cotyledons and to improve their nutritive and sensorial characteristics. However, processing affects not only their nutritive constituents, but also their bioactive compounds. The final content of phytochemicals depends on the pulse type and variety, the processing method and their parameters (mainly temperature and time), the food matrix structure and the chemical nature of each phytochemical. This review focuses on the changes produced in the bioactive-compound content of pulses processed by a traditional processing method like cooking (with or without pressure) or by an industrial processing technique like extrusion, which is widely used in the food industry to develop new food products with pulse flours as ingredients. In particular, the effect of processing methods on inositol phosphates, galactosides, protease inhibitors and phenolic-compound content is highlighted in order to ascertain their content in processed pulses or pulse-based products as a source of healthy phytochemicals.

A review on traditional technology and safety challenges with regard to antinutrients in legume foods

A large section of the human population relies on legumes as a staple food. Legumes are a rich source of nutrients and possess several health-related beneficial properties. However, the nutritional quality of legumes is challenged by the presence of a considerable amount of antinutrients. Consumption of inadequately processed legumes might affect normal metabolism and cause adverse human health-related effects. Effective processing becomes necessary to reduce these antinutritional factors before consumption. Optimizing the processing variables during preparation of legume-based traditional foods by using response surface methodology could be a valuable option to reduce antinutrients. The present review focuses on the efficacy of traditional household-scale processing unit operations vis-à-vis the reduction of antinutrients. Optimally prepared products should ensure meeting the consumer demand of improved, healthy, and more nutritious and safe foods. Modeling-based optimization approach will be helpful to define best practices at the small-, medium-, and large scale production alike. It should contribute towards effective utilization of legume resources, and to alleviate malnutrition and associated diseases world-wide.

Effects of extruded whole-grain sorghum (Sorghum bicolor (L.) Moench) based diets on calcium absorption and bone health of growing Wistar rats

Apparent calcium absorption, total bone mineral content and density, and mineral contents of the right femur were studied using a growing rat model. Twenty-four male Wistar rats were fed with diets based on extruded whole grain red (RSD) or white sorghum (WSD), and control diet (CD) up to 60 days. The animals fed with sorghum diets consumed less and gained less weight compared to those fed with CD, but the efficiency of all diets was similar. Calcium intake was lower in animals fed with sorghum diets, related to the lower total intake of these animals. Apparent calcium absorption in animals fed with RSD was lower than in those fed with CD (CD: 72.7%, RSD: 51.0%, WSD: 64.8%). No significant differences in bone mineral density of total body, spin, femur, distal femur, tibia and proximal tibia were observed among the groups. However, Ca and P contents in the right femur of the rats consuming RSD were lower, indicating a certain imbalance in the metabolism of these minerals.

Oxidation induced by dielectric-barrier discharge (DBD) plasma treatment reduces soybean agglutinin activity

In this study, potential of dielectric-barrier discharge (DBD) plasma treatment (40 kV, 12 kHz at 1, 2, 3 and 4 min) to eliminate soybean agglutinin (SBA) activity was investigated in a SBA model system and soymilk. The plasma treatment decreased the SBA in the model system and hemagglutination activity was decreased by 87.31%. SDS-PAGE analysis confirmed the degradation of the SBA polypeptide chain. The multi-spectroscopic analysis revealed a two-stage structure alteration in the SBA upon exposure to the plasma treatment. Oxidation of NH-/NH₂- at the peptide bond disrupted the hydrogen bonds and altered the secondary structure of SBA. Further oxidation of aromatic amino acid, cleavage of peptide bonds and the breakage of polypeptide led to the SBA fragmentation and complete unfolding of the protein. The SBA inactivation by the plasma treatment was confirmed in soymilk. Plasma treatment is a promising technology for the elimination of SBA in soybean product.

Inclusion of Limited Amounts of Extruded Legumes Plus Cereal Mixes in Normocaloric or Obesogenic Diets for Rats: Effects on Lipid Profile

Overweight and obesity are regarded as world epidemics and are major risk factors for a number of chronic diseases, including diabetes, cardiovascular diseases, and cancer. Two new highly palatable extruded mixes based on rice and pea (Pisum sativum) or kidney bean (Phaseolus vulgaris) meals were incorporated into normocaloric or obesogenic diets for rats at a low inclusion level (25%). Our purpose was to evaluate the effects of dietary incorporation of this new food ingredient on lipid profile. Organs (heart, liver, kidneys, spleen, stomach, small intestine, colon, cecum) and visceral fat relative weights were different (p < 0.01) from controls for animals fed the obesogenic diets and in rats fed extruded diets with respect to controls. Faecal excretion of bile acids was higher (p < 0.01) for rats fed extruded mixes compared with controls. The inclusion of extruded mixes replacing part of the casein in the control diet lowered liver cholesterol and triglycerides (p < 0.001) and plasma low-density lipoprotein (LDL; p < 0.01) values, although plasma high-density lipoprotein (HDL) was unaltered. Both the inclusion of extruded mixes and the use of obesogenic diets resulted in significantly (p < 0.001) different long chain fatty acid (LCFA) profiles in liver and visceral fat. Incorporating extruded legume plus cereal mixes beneficially influenced lipid metabolism, and would therefore deserve closer attention in human intervention studies, particularly with adolescents. To our knowledge, this is the first report on the nutritional and physiological effects of extruded legume plus cereal mixes.

Structural and functional modification of food proteins by high power ultrasound and its application in meat processing

In the field of agricultural and food processing, high power ultrasound (HPUS) is recognized as a green, physical and non-thermal technology in improving the safety and quality of foods. The functional properties of food proteins are responsible for texture, yield and organoleptic of food products which are the theoretical basis for food processing optimizing. HPUS treatment could provide the possibility for creating novel functional properties of new foods with desirable properties due to the modification of protein structure. In this article, an overview of the previous studies and recent progress of the relationship between structure modification and functional properties of food proteins using the HPUS technique were presented. The research results revealed that HPUS could significantly affect the conformation and structure of protein due to the cavitation effect resulting in the improvement of solubility, interfacial, viscosity, gelation and flavor binding properties of proteins. During meat processing, HPUS can modify the structure and thereby improve the functional properties of myofibrillar protein (MP), leading to the quality enhancement, low fat and/or salt products development and the shelf life extending. In view of this review, the recent findings of applications of HPUS in the production of meat products based on the modification of MP including curing, freezing/thawing and thermal processing have been summarized. Finally, the future considerations were presented in order to facilitate the progress of HPUS in meat industry and provided the suggestions based on the advanced protein modification by HPUS for the commercial utilization of HPUS in producing the innovative meat products.

Impact of Microwave Thermal Processing on Major Grain Quality Traits of Linseed (Linum usitatissium L.)

The current study investigated the effects of thermal processing of the microwave technology on nutritive value, crude protein solubility, urease activity and amino acid profile on linseed grains. Samples were treated in a SAMSUNG GE82N-B microwave oven at 450W for 0 (L1), 60 (L2), 180 (L3), 300 (L4), and 420 (L5) seconds, respectively. Microwave treatment for 300 seconds showed a significant (p ≤ 0.05) decrease in activity urease comparing to raw linseed. The raw and treated linseed protein solubility index (PDI) show statistical differences (p ≤ 0.05) between all the treatments compared. High performance liquid chromatography (HPLC) analyses of samples differences in the amino acid composition between controls and experimental treatments showed that amino acids were not significantly affected (p ≥ 0.05), except isoleucine and leucine amino acid (p ≤ 0.05). From the results of the present study, it is possible to identify that the best method for improving linseed quality for animal feed is the application of microwave for 60 second (treatment L2). Our results indicate that microwave thermal processing or micronizing dry thermal processing of grains could be successfully used in large industrial feed production with a short period of time and the improved nutritional parameters of grains, increased shelf-life and the unchanged amino acid profile of treated grains.

Extrusion and nixtamalization conditions influence the magnitude of change in the nutrients and bioactive components of cereals and legumes

Cereal and legume diets make up the bulk of caloric sources for a majority of households in the developing world. They contain macro- and micronutrients as well as phytochemicals embedded as one matrix. Some phytochemicals are antinutritional factors which can bind nutrients thereby hindering their bioavailability. While there are other methods that can be used to enhance nutrient utilization from such foods, we summarize how food processing methods such as extrusion and nixtamalization are employed to break the food matrix and release these nutrients. Both extrusion and nixtamalization can break down complex carbohydrates into simpler, more soluble forms while at the same time inactivating or denaturing protein inhibitors and other antinutritional factors. Such disruptions of complexes within the food matrix are essential for harnessing optimum nutritional and health benefit from these foods. We present mechanistic approaches explaining how these processes enhance nutrient and mineral bioavailability and phytochemical bioactivity while minimizing the undesirable effects of antinutritional factors that coexist in the complex food matrix.

Plant food anti-nutritional factors and their reduction strategies: an overview

Abstract

Legumes and cereals contain high amounts of macronutrients and micronutrients but also anti-nutritional factors. Major anti-nutritional factors, which are found in edible crops include saponins, tannins, phytic acid, gossypol, lectins, protease inhibitors, amylase inhibitor, and goitrogens. Anti-nutritional factors combine with nutrients and act as the major concern because of reduced nutrient bioavailability. Various other factors like trypsin inhibitors and phytates, which are present mainly in legumes and cereals, reduce the digestibility of proteins and mineral absorption. Anti-nutrients are one of the key factors, which reduce the bioavailability of various components of the cereals and legumes. These factors can cause micronutrient malnutrition and mineral deficiencies. There are various traditional methods and technologies, which can be used to reduce the levels of these anti-nutrient factors. Several processing techniques and methods such as fermentation, germination, debranning, autoclaving, soaking etc. are used to reduce the anti-nutrient contents in foods. By using various methods alone or in combinations, it is possible to reduce the level of anti-nutrients in foods. This review is focused on different types of anti-nutrients, and possible processing methods that can be used to reduce the level of these factors in food products.

Graphical abstract

A brief overview of beneficial effects of anti-nutrients and reduction strategy.

Bioactive Compounds in Food Waste: A Review on the Transformation of Food Waste to Animal Feed

Bioactive compounds are substances which are present in foods in small amounts and have the ability to provide health benefits. Bioactive compounds include but are not limited to long-chain polyunsaturated fatty acids, vitamins, carotenoids, peptides, and polyphenols. The aim of the present study is to review literature for potential bioactive compounds present in food waste material and discuss the transformation of food waste to animal feed under the perspective that usage of food waste, rather than disposal, may tackle food insecurity and provide health benefits. Finally, applications in poultry and swine nutrition, with emphasis on the presence of fatty acids on food waste material, are discussed.

Subchronic Study of a White Kidney Bean (Phaseolus vulgaris) Extract with α-Amylase Inhibitory Activity

Common bean extract as a dietary supplement has received increased attention globally owing to its α-amylase inhibitory activity. The objective of this study was to evaluate the toxicity of a white kidney bean (Phaseolus vulgaris) extract by a repeated-dose 90-day subchronic oral toxicity study in Sprague-Dawley rats. In the subchronic toxicity study, 80 rats were orally administrated with white kidney bean extract at doses of 4, 2, and 1 g/kg body weight daily for 90 days. The results showed that the white kidney bean extract at doses up to 4 g/kg/day did not induce significant changes in body weight, organ weight, food consumption, hematology, serum biochemistry, and histopathology in rats, as compared to the control. The no-observed-adverse-effect level (NOAEL) of white kidney bean extract was determined to be >4 g/kg/day for both male and female rats, under the experimental conditions of this study.

Bioactive Compounds, Antioxidant Activity, and Sensory Analysis of Rice-Based Extruded Snacks-Like Fortified with Bean and Carob Fruit Flours

Generally, extruded gluten-free foods are mostly phytochemically deficient. In this study inositol phosphates, α-galactosides, lectins, protease inhibitors, and phenols, their antioxidant activity and sensorial analysis of some rice/bean/whole carob fruit flour blends were determined in unprocessed (controls) and extruded formulations. The fortification of rice-based extrudates with both legumes has a positive influence on both their bioactive compound content and their acceptability by consumers. The extruded formulations contained around twice as much (p < 0.05) total α-galactosides than their unprocessed counterparts. Extrusion significantly reduced the phytic acid content (10%) and significantly increased the less phosphorylated forms (16%-70%). After extrusion, the lectins and protease inhibitors were eliminated. The different phenolic compounds mostly increased (11%-36%), notably in the formulations with carob fruit. The antioxidant activity and the different groups of phenols showed a positive correlation in the extrudates. All the experimental extrudates had higher amounts of bioactive compounds than the commercial extruded rice. Considering the amount of phytochemicals determined in the novel gluten-free extrudates and the scores of sensorial analysis, formulations containing 20%-40% bean and 5% carob fruit could be adequate in promoting health-related functions, helping to increase pulse consumption, and allowing the food industry to satisfy consumers' requirement for functional foods.

Protein Digestibility of Cereal Products

Protein digestibility is currently a hot research topic and is of big interest to the food industry. Different scoring methods have been developed to describe protein quality. Cereal protein scores are typically low due to a suboptimal amino acid profile and low protein digestibility. Protein digestibility is a result of both external and internal factors. Examples of external factors are physical inaccessibility due to entrapment in e.g., intact cell structures and the presence of antinutritional factors. The main internal factors are the amino acid sequence of the proteins and protein folding and crosslinking. Processing of food is generally designed to increase the overall digestibility through affecting these external and internal factors. However, with proteins, processing may eventually also lead to a decrease in digestibility. In this review, protein digestion and digestibility are discussed with emphasis on the proteins of (pseudo)cereals.

Physicochemical evaluation of corn extrudates containing varying buckwheat flour levels prepared at various extrusion temperatures

This study analyzed the characteristics (physicochemical properties as well as antioxidant activity) of corn grit extrudates containing buckwheat flour at various levels (0, 10, 20 and 30% w/w) extruded at various temperatures (130, 150 and 170 °C). Effect of roasting (92 °C for 15 min) on the extrudates was also studied. Buckwheat incorporation at different levels mainly increased the diameter, a* value (indicating redness), phenolic content and antioxidant capacity, while decreased bulk density and water absorption index of the extruded products. On the other hand, increment in extrusion temperature primarily increased the L* values (lightness), a* values and antioxidant activity but decreased the phenolic content of extrudates. Roasting improved the flavor and texture of the extrudates which was desirable. Extrudates prepared from corn grit with incorporation of buckwheat up to 20% level and extrusion cooking at 150 °C showed best sensory scores.

Plant phenolics as functional food ingredients

Phenolic compounds have attracted much attention in recent times as their dietary intake has been associated with the prevention of some chronic and degenerative diseases that constitute major causes of death and incapacity in developed countries, such as cardiovascular diseases, type II diabetes, some types of cancers or neurodegenerative disorders like Alzheimer's and Parkinson's diseases. Nowadays it is considered that these compounds contribute, at least in part, for the protective effects of fruit and vegetable-rich diets, so that the study of their role in human nutrition has become a central issue in food research. This chapter reviews the current knowledge on the phenolic compounds as food components, namely their occurrence in the diet, bioavailability and metabolism, biological activities and mechanisms of action. Besides, the approaches for their extraction from plant matrices and technological improvements regarding their preparation, stability and bioavailability in order to be used as functional food ingredients are also reviewed, as well as their legal situation regarding the possibility of making "health claims" based on their presence in food and beverages.