Applications of alginate microspheres in therapeutics delivery and cell culture: Past, present and future

Harnessing cell-material interactions to control stem cell secretion for osteoarthritis treatment

Osteoarthritis (OA) is the most common debilitating joint disease, yet there is no curative treatment for OA to date. Delivering mesenchymal stromal cells (MSCs) as therapeutic cells to mitigate the inflammatory symptoms associated with OA is attracting increasing attention. In principle, MSCs could respond to the pro-inflammatory microenvironment of an OA joint by the secretion of anti-inflammatory, anti-apoptotic, immunomodulatory and pro-regenerative factors, therefore limiting pain, as well as the disease development. However, the microenvironment of MSCs is known to greatly affect their survival and bioactivity, and using tailored biomaterial scaffolds could be key to the success of intra-articular MSC-based therapies. The aim of this review is to identify and discuss essential characteristics of biomaterial scaffolds to best promote MSC secretory functions in the context of OA. First, a brief introduction to the OA physiopathology is provided, followed by an overview of the MSC secretory functions, as well as the current limitations of MSC-based therapy. Then, we review the current knowledge on the effects of cell-material interactions on MSC secretion. These considerations allow us to define rational guidelines for next-generation biomaterial design to improve the MSC-based therapy of OA.

Redox-responsive degradable microgel modified with superparamagnetic nanoparticles exhibiting controlled, hyperthermia-enhanced drug release

A novel degradable microgel based on poly(N-isopropylacrylamide) (pNIPA) cross-linked with N,N’-bisacryloylcystine (BISS) and containing superparamagnetic iron oxide nanoparticles (SPION@CA) was synthesized by semi-batch precipitation polymerization and examined as a potential hyperthermia-enhanced drug carrier. The pNIPA provided the microgel with temperature sensitivity, the BISS was responsible for degradation in the presence of glutathione (GSH) (an –S–S–bond reductor naturally present in cells), while the SPION@CA permitted remote control of temperature to improve drug release. The microgels exhibited volume phase transition temperature at ca. 34 °C, which is near the human body temperature, and were stable across a wide range of temperatures and ionic strengths, as well as in the blood plasma at 37 °C. It was found that the presence of SPION@CA in the polymer network of the microgels enabled the temperature to be increased up to 42 °C by an alternating magnetic field, and that increasing the temperature from 37 to 42 °C significantly enhanced the releasing of the anticancer drug doxorubicin (DOX). The highest DOX release (82%) was observed at pH 5, 42 °C, and in the presence of GSH, and the lowest (20%) at pH 7.4, 37 °C, and in the absence of GSH. MTT assay indicated that compared to free doxorubicin, the microgel particles loaded with doxorubicin have comparable cytotoxicity against MCF-7 cancer cells while being significantly less toxic to MCF-10A healthy cells.

Graphical abstract

Gelatin/alginate-based microspheres with sphere-in-capsule structure for spatiotemporal manipulative drug release in gastrointestinal tract

Microsphere with sphere-in-capsule structure is a multi-drugs delivery system to achieve the purpose of combination therapy. In this paper, we have prepared gelatin/alginate-based microspheres with sphere-in-capsule structure by a relatively fast, simple, and easily large-scale industrialized emulsification method for spatiotemporal manipulative drug release in gastrointestinal tract. Calcium alginate microspheres encapsulated with bovine serum albumin (BSA) were first prepared as inner microspheres, and then inner microspheres and ranitidine hydrochloride (RH) were co-encapsulated by gelatin microspheres to form double-layer microspheres with sphere-in-capsule structure. The size and distribution of microspheres can be easily controlled by emulsifying conditions. The microspheres with sphere-in-capsule structure displayed desirable encapsulation efficiency of BSA (61.52 %) and RH (56.07 %). The in vitro simulated drug release showed the spatiotemporal release feature of microspheres with sphere-in-capsule structure. In the specific simulated fluid, the release behavior and cumulative release of RH (sustainedly released 95 % in simulated gastric fluid) and BSA (rapidly released 73 % in simulated intestinal fluid) were different. The drug release mechanisms were analyzed to determine RH and BSA's release behavior. Overall, the microspheres with sphere-in-capsule structure have the potential application of spatiotemporal manipulative drug delivery in the gastrointestinal tract.

Advances in Algin and Alginate-Hybrid Materials for Drug Delivery and Tissue Engineering

In this review, we aim to provide a summary of recent research advancements and applications of algin (i.e., alginic acid) and alginate-hybrid materials (AHMs) in medical fields. Algin/alginate are abundant natural products that are chemically inert and biocompatible, and they have superior gelation properties, good mechanical strengths, and biodegradability. The AHMs have been widely applied in wound dressing, cell culture, tissue engineering, and drug delivery. However, medical applications in different fields require different properties in the AHMs. The drug delivery application requires AHMs to provide optimal drug loading, controlled and targeted drug-releasing, and/or visually guided drug delivery. AHMs for wound dressing application need to have improved mechanical properties, hydrophilicity, cell adhesion, and antibacterial properties. AHMs for tissue engineering need improved mechanical properties that match the target organs, superior cell affinity, and cell loading capacity. Various methods to produce AHMs that meet different needs were summarized. Formulations to form AHMs with improved stability, drug/cell-loading capacity, cell adhesion, and mechanical properties are active research areas. This review serves as a road map to provide insights into the strategies to develop AHMs in medical applications.

Identification and Characterization of a New Cold-Adapted and Alkaline Alginate Lyase TsAly7A from Thalassomonas sp. LD5 Produces Alginate Oligosaccharides with High Degree of Polymerization

Alginate oligosaccharides (AOS) and their derivatives become popular due to their favorable biological activity, and the key to producing functional AOS is to find efficient alginate lyases. This study showed one alginate lyase TsAly7A found in Thalassomonas sp. LD5, which was predicted to have excellent industrial properties. Bioinformatics analysis and enzymatic properties of recombinant TsAly7A (rTsAly7A) were investigated. TsAly7A belonged to the fifth subfamily of polysaccharide lyase family 7 (PL7). The optimal temperature and pH of rTsAly7A was 30 °C and 9.1 in Glycine-NaOH buffer, respectively. The pH stability of rTsAly7A under alkaline conditions was pretty good and it can remain at above 90% of the initial activity at pH 8.9 in Glycine-NaOH buffer for 12 h. In the presence of 100 mM NaCl, rTsAly7A showed the highest activity, while in the absence of NaCl, 50% of the highest activity was observed. The rTsAly7A was an endo-type alginate lyase, and its end-products of alginate degradation were unsaturated oligosaccharides (degree of polymerization 2-6). Collectively, the rTsAly7A may be a good industrial production tool for producing AOS with high degree of polymerization.

Monitor Tumor pHe and Response Longitudinally during Treatment Using CEST MRI-Detectable Alginate Microbeads

Imaging pHe of the tumor microenvironment has paramount importance for characterizing aggressive, invasive tumors, as well as therapeutic responses. Here, a robust approach to image pH changes in the tumor microenvironment longitudinally and during sodium bicarbonate treatment was reported. The pH-sensing microbeads were designed and prepared based on materials approved for clinical use, i.e., alginate microbead-containing computed tomography (CT) contrast-agent (iopamidol)-loaded liposomes (Iop-lipobeads). This Iop-lipobead prepared using a customized microfluidic device generated a CEST contrast of 10.6% at 4.2 ppm at pH 7.0, which was stable for 20 days in vitro. The CEST contrast decreased by 11.8% when the pH decreased from 7.0 to 6.5 in vitro. Optimized Iop-lipobeads next to tumors showed a significant increase of 19.7 ± 6.1% (p < 0.01) in CEST contrast at 4.2 ppm during the first 3 days of treatment and decreased to 15.2 ± 4.8% when treatment stopped. Notably, percentage changes in Iop-lipobeads were higher than that of amide CEST (11.7% and 9.1%) in tumors during and after treatment. These findings demonstrated that the Iop-lipobead could provide an independent and sensitive assessment of the pHe changes for a noninvasive and longitudinal monitoring of the treatment effects using multiple CEST contrast.

Carbohydrate Polymer-Based Targeted Pharmaceutical Formulations for Colorectal Cancer: Systematic Review of the Literature

Colon cancer is the third most diagnosed cancer worldwide, followed by lung and breast cancer. Conventional treatment methods are associated with numerous side effects and compliance issues. Thus, colon targeted drug delivery has gained much attention due to its evident advantages. Although many technologies have been explored, the use of pH-sensitive polymers, especially biodegradable polymers, holds exceptional promise. This review aims to collate research articles concerning recent advances in this area. A systematic search using multiple databases (Google Scholar, EMBASE, PubMed, MEDLINE and Scopus) was carried out following the preferred reported items for systematic reviews and meta-analyses (PRISMA) guidelines with an aim to explore the use of pH-sensitive carbohydrate polymers in developing colon targeted pharmaceutical formulations. Following screening and quality assessment for eligibility, 42 studies were included, exploring either single or a combination of carbohydrate polymers to develop targeted formulations for colon cancer therapy. Pectin (11) is the most widely used of these biopolymers, followed by chitosan (09), alginate (09) and guar gum (08). This systematic review has successfully gathered experimental evidence highlighting the importance of employing carbohydrate polymers in developing targeting formulations to manage colon cancer.

Sodium Alginate—Natural Microencapsulation Material of Polymeric Microparticles

From the multitude of materials currently available on the market that can be used in the development of microparticles, sodium alginate has become one of the most studied natural anionic polymers that can be included in controlled-release pharmaceutical systems alongside other polymers due to its low cost, low toxicity, biocompatibility, biodegradability and gelatinous die-forming capacity in the presence of Ca²⁺ ions. In this review, we have shown that through coacervation, the particulate systems for the dispensing of drugs consisting of natural polymers are nontoxic, allowing the repeated administration of medicinal substances and the protection of better the medicinal substances from degradation, which can increase the capture capacity of the drug and extend its release from the pharmaceutical form.

Antibacterial performance of graphene oxide/alginate-based antisense hydrogel for potential therapeutic application in Staphylococcus aureus infection

Staphylococcus aureus (S. aureus) is an opportunistic bacterium that causes several infections in humans. However, chronic biofilms remain a major challenge associated with recalcitrance toward traditional treatments. Herein, an antibacterial hydrogel composed of antisense DNA oligonucleotides, graphene oxide and alginate is construed for biofilm management and infection care. The hydrogel is established through noncovalent binding and possesses injectability and degradability properties. Furthermore, hydrogels present controllable release of cargoes, genetic targeting antibacterial effects and stem cell supporting capabilities. Our in vivo results reveal a high antibiofilm performance and good biocompatibility, which significantly improve tissue regeneration. The hydrogel inhibits biofilm formation by decreasing the expression of YycFG with antisense and viability of strains by graphene oxide. Thus, antisense hydrogels can be a promising antibacterial bioactive material for potential therapeutic S. aureus infection.

Alginate-Based Micro- and Nanosystems for Targeted Cancer Therapy

Alginates have been widely explored due to their salient advantages of hydrophilicity, biocompatibility, mucoadhesive features, bioavailability, environmentally-benign properties, and cost-effectiveness. They are applied for designing micro- and nanosystems for controlled and targeted drug delivery and cancer therapy as alginate biopolymers find usage in encapsulating anticancer drugs to improve their bioavailability, sustained release, pharmacokinetics, and bio-clearance. Notably, these nanomaterials can be applied for photothermal, photodynamic, and chemodynamic therapy of cancers/tumors. Future explorations ought to be conducted to find novel alginate-based (nano)systems for targeted cancer therapy using advanced drug delivery techniques with benefits of non-invasiveness, patient compliance, and convenience of drug administration. Thus, some critical parameters such as mucosal permeability, stability in the gastrointestinal tract environment, and drug solubility ought to be considered. In addition, the comprehensive clinical translational studies along with the optimization of synthesis techniques still need to be addressed. Herein, we present an overview of the current state of knowledge and recent developments pertaining to the applications of alginate-based micro- and nanosystems for targeted cancer therapy based on controlled drug delivery, photothermal therapy, and chemodynamic/photodynamic therapy approaches, focusing on important challenges and future directions.

Superwettable and injectable GelMA-MSC microspheres promote cartilage repair in temporomandibular joints

Temporomandibular disorders (TMD) can be treated by promoting cartilage regeneration with biomaterials. However, there are deficiencies in the infiltration function of bone filler biological materials. In this study, stems cells were loaded onto gelatin methacryloyl (GelMA) hydrogel microspheres endowed with superwettable properties and TGF-β sustained-release function, which can quickly infiltrate the irregular surface of the temporomandibular joint (TMJ) bone defect area and accelerate cartilage healing. First, to improve cell adhesion and spreading function, the BMSCs-coated GelMA microspheres were endowed with superwetting property. At the same time, the swelling adsorption characteristics of gelatin microspheres could be used to load recombinant TGF-β within the microspheres, which could in turn promote the chondrogenic differentiation of multi-potent bone marrow mesenchymal stem cells. The SEM imaging demonstrated that BMSCs-coated GelMA microsphere has superwettable and superhydrophilic property, which enabled rapid adaptation to the bone defect surface morphology, which is conducive to tissue repair. Furthermore, the cartilage defect model showed that rBMSCs-coated GelMA microspheres promote temporomandibular joint arthritis repair. In conclusion, our study established that BMSC-coated GelMA microspheres endowed with superwetting properties, can colonize the bone defect repair site better with sustained release of growth factors, thus providing an innovative strategy for promoting cartilage regeneration.

Preparation and Characteristics of Alginate Microparticles for Food, Pharmaceutical and Cosmetic Applications

Alginates are the most widely used natural polymers in the pharmaceutical, food and cosmetic industries. Usually, they are applied as a thickening, gel-forming and stabilizing agent. Moreover, the alginate-based formulations such as matrices, membranes, nanospheres or microcapsules are often used as delivery systems. Alginate microparticles (AMP) are biocompatible, biodegradable and nontoxic carriers, applied to encapsulate hydrophilic active substances, including probiotics. Here, we report the methods most frequently used for AMP production and encapsulation of different actives. The technological parameters important in the process of AMP preparation, such as alginate concentration, the type and concentration of other reagents (cross-linking agents, oils, emulsifiers and pH regulators), agitation speed or cross-linking time, are reviewed. Furthermore, the advantages and disadvantages of alginate microparticles as delivery systems are discussed, and an overview of the active ingredients enclosed in the alginate carriers are presented.

Functional microspheres for tissue regeneration

As a new type of injectable biomaterials, functional microspheres have attracted increasing attention in tissue regeneration because they possess some advantageous properties compared to other biomaterials, including hydrogels. A variety of bio-inspired microspheres with unique structures and properties have been developed as cellular carriers and drug delivery vehicles in recent years. In this review, we provide a comprehensive summary of the progress of functional and biodegradable microspheres that have been used for tissue regeneration over the last two decades. First, we briefly introduce the biomaterials and general methods for microsphere fabrication. Next, we focus on the newly developed technologies for preparing functional microspheres, including macroporous microspheres, nanofibrous microspheres, hollow microspheres, core-shell structured microspheres, and surface-modified functional microspheres. After that, we discuss the application of functional microspheres for tissue regeneration, specifically for bone, cartilage, dental, neural, cardiac, and skin tissue regeneration. Last, we present our perspectives and future directions of functional microspheres as injectable carriers for the future advancement of tissue regeneration.

Facile Construction of a Two-in-One Injectable Micelleplex-Loaded Thermogel System for the Prolonged Delivery of Plasmid DNA

Nanoparticle-hydrogel systems have recently emerged as a class of interesting hybrid materials with immense potential for several biomedical applications. Remarkably, the incorporation of nanoparticles into a hydrogel may yield synergistic benefits lacking in a singular system. However, most synthetic strategies require laborious steps to achieve the system, severely restricting the process of translational research. Herein, a facile strategy to access a two-in-one system comprising two distinct polyurethane (PU)-based micellar systems is demonstrated and applied as a novel sustained gene delivery platform, where the two PUs are synthesized similarly but with slightly different compositions. One PU forms cationic micelles that complex with plasmid DNA (pDNA), which are loaded into a thermogel formed by another PU micellar system for the prolonged release of pDNA micelleplexes. Specifically, a thermogelling multiblock PU copolymer (denoted as EPH) was synthesized via the step-growth polymerization of poly(ethylene glycol), poly(propylene glycol), and poly(3-hydroxybutyrate). By further introducing a cationic extender, 3-(dimethylamino)-1,2-propanediol, into the reaction feed, a series of cationic PUs (denoted as EPHD) with varying compositions were obtained. The EPHDs formed positively charged micelles in aqueous solutions, efficiently condensed pDNA into nano-sized micelleplexes (<200 nm) at optimized w/w ratios, and mediated transient green fluorescence protein expression in HEK293T cells at 48 h post-transfection. On the other hand, aqueous EPH solution (4 wt %) was injectable at 4 °C and rapidly gelled upon heating to 37 °C to form a stable hydrogel depot. EPHD/pDNA micelleplexes were easily loaded into EPH by mixing the solutions at 4 °C, before heating to 37 °C, leading to the resultant hydrogel system. The in vitro release study revealed that while free pDNA loaded in the thermogel was completely released in 2 weeks, the release of EPHD/pDNA micelleplexes was prolonged to at least 28 days, suggesting substantial micelleplex-hydrogel interactions. Intact, bioactive, and noncytotoxic EPHD/pDNA micelleplexes in the release media were proved by gel retardation, in vitro gene transfection, and CCK-8 cytotoxicity assay results, respectively. Collectively, this work presents a simple approach to achieving and optimizing a novel two-in-one nanoparticle-hydrogel system for the prolonged delivery of pDNA and may be promising for long-term gene delivery applications.

Natural Biopolymers as Additional Tools for Cell Microencapsulation Applied to Cellular Therapy

One of the limitations in organ, tissue or cellular transplantations is graft rejection. To minimize or prevent this, recipients must make use of immunosuppressive drugs (IS) throughout their entire lives. However, its continuous use generally causes several side effects. Although some IS dose reductions and withdrawal strategies have been employed, many patients do not adapt to these protocols and must return to conventional IS use. Therefore, many studies have been carried out to offer treatments that may avoid IS administration in the long term. A promising strategy is cellular microencapsulation. The possibility of microencapsulating cells originates from the opportunity to use biomaterials that mimic the extracellular matrix. This matrix acts as a support for cell adhesion and the syntheses of new extracellular matrix self-components followed by cell growth and survival. Furthermore, by involving the cells in a polymeric matrix, the matrix acts as an immunoprotective barrier, protecting cells against the recipient’s immune system while still allowing essential cell survival molecules to diffuse bilaterally through the polymer matrix pores. In addition, this matrix can be associated with IS, thus diminishing systemic side effects. In this context, this review will address the natural biomaterials currently in use and their importance in cell therapy.

Encapsulation of Human-Bone-Marrow-Derived Mesenchymal Stem Cells in Small Alginate Beads Using One-Step Emulsification by Internal Gelation: In Vitro, and In Vivo Evaluation in Degenerate Intervertebral Disc Model

Cell microencapsulation in gel beads contributes to many biomedical processes and pharmaceutical applications. Small beads (<300 µm) offer distinct advantages, mainly due to improved mass transfer and mechanical strength. Here, we describe, for the first time, the encapsulation of human-bone-marrow-derived mesenchymal stem cells (hBM-MSCs) in small-sized microspheres, using one-step emulsification by internal gelation. Small (127−257 µm) high-mannuronic-alginate microspheres were prepared at high agitation rates (800−1000 rpm), enabling control over the bead size and shape. The average viability of encapsulated hBM-MSCs after 2 weeks was 81 ± 4.3% for the higher agitation rates. hBM-MSC-loaded microspheres seeded within a glycosaminoglycan (GAG) analogue, which was previously proposed as a mechanically equivalent implant for degenerate discs, kept their viability, sphericity, and integrity for at least 6 weeks. A preliminary in vivo study of hBM-MSC-loaded microspheres implanted (via a GAG-analogue hydrogel) in a rat injured intervertebral disc model demonstrated long-lasting viability and biocompatibility for at least 8 weeks post-implantation. The proposed method offers an effective and reproducible way to maintain long-lasting viability in vitro and in vivo. This approach not only utilizes the benefits of a simple, mild, and scalable method, but also allows for the easy control of the bead size and shape by the agitation rate, which, overall, makes it a very attractive platform for regenerative-medicine applications.

Engineering of cardiac microtissues by microfluidic cell encapsulation in thermoshrinking non-crosslinked PNIPAAm gels

Multicellular agglomerates in form of irregularly shaped or spherical clusters can recapitulate cell-cell interactions and are referred to as microtissues. Microtissues gain increasing attention in several fields including cardiovascular research. Cardiac microtissues are evolving as excellent model systems for drug testing in vitro (organ-on-a-chip), are used as tissue bricks in 3D printing processes and pave the way for improved cell replacement therapies in vivo. Microtissues are formed for example in hanging drop culture or specialized microwell plates; truly scalable methods are not yet available. In this study, a novel method of encapsulation of cells in Poly-N-isopropylacrylamid (PNIPAAm) spheres is introduced. Murine induced pluripotent stem cell-derived cardiomyocytes (CMs) and bone marrow-derived mesenchymal stem cells (MSCs) were encapsulated in PNIPAAm by raising the temperature of droplets formed in a microfluidics setup above the lower critical solute temperature (LCST) of 32°C. PNIPAAM precipitates to a water-insoluble physically linked gel above the LCST and shrinks by the expulsion of water, thereby trapping the cells in a collapsing polymer network and increasing the cell density by one order of magnitude. Within 24 hours, stable cardiac microtissues were first formed and later released from their polymer shell by washout of PNIPAAm at temperatures below the LCST. Rhythmically contracting microtissues showed homogenous cell distribution, age-dependent sarcomere organizations and action potential generation. The novel approach is applicable for microtissue formation from various cell types and can be implemented into scalable workflows.

Micro/Nanosystems for Magnetic Targeted Delivery of Bioagents

Targeted delivery of pharmaceuticals is promising for efficient disease treatment and reduction in adverse effects. Nano or microstructured magnetic materials with strong magnetic momentum can be noninvasively controlled via magnetic forces within living beings. These magnetic carriers open perspectives in controlling the delivery of different types of bioagents in humans, including small molecules, nucleic acids, and cells. In the present review, we describe different types of magnetic carriers that can serve as drug delivery platforms, and we show different ways to apply them to magnetic targeted delivery of bioagents. We discuss the magnetic guidance of nano/microsystems or labeled cells upon injection into the systemic circulation or in the tissue; we then highlight emergent applications in tissue engineering, and finally, we show how magnetic targeting can integrate with imaging technologies that serve to assist drug delivery.

Alginate-based Composites Microspheres: Preparations and Applications for Bone Tissue Engineering

Alginate-based biomaterials have been extensively studied for bone tissue engineering. Scaffolds, microspheres, and hydrogels can be developed using alginate, which is biocompatible, biodegradable, and able to deliver growth factors and drugs. Alginate microspheres can be produced using crosslinking, microfluidic, three-dimensional printing, extrusion, and emulsion methods. The sizes of the alginate microspheres range from 10 µm to 4 mm. This review describes the chemical characterization and mechanical assessment of alginate-based microspheres. Combinations of alginate with hydroxyapatite, chitosan, collagen, polylactic acid, polycaprolactone, and bioglass were discussed for bone tissue repair and regeneration. In addition, alginate combinations with bone morphogenetic proteins, vascular endothelial growth factor, transforming growth factor beta-3, other growth factors, cells, proteins, drugs, and osteoinductive drugs were analyzed for tissue engineering applications. Furthermore, the biocompatibility of developed alginate microspheres was discussed for different cell lines. Finally, alginate microsphere-based composites with stem cell interaction for bone tissue regeneration were presented. In the present review, we have assessed the preclinical research on in vivo models of alginate-based microspheres for bone tissue repair and regeneration. Overall, alginate-based microspheres are potential candidates for graft substitutes and the treatment of various bone-related diseases.

Hard, Soft, and Hard-and-Soft Drug Delivery Carriers Based on CaCO3 and Alginate Biomaterials: Synthesis, Properties, Pharmaceutical Applications

Because free therapeutic drug molecules often have adverse effects on normal tissues, deliver scanty drug concentrations and exhibit a potentially low efficacy at pathological sites, various drug carriers have been developed for preclinical and clinical trials. Their physicochemical and toxicological properties are the subject of extensive research. Inorganic calcium carbonate particles are promising candidates as drug delivery carriers owning to their hardness, porous internal structure, high surface area, distinctive pH-sensitivity, low degradability, etc, while soft organic alginate hydrogels are also widely used because of their special advantages such as a high hydration, bio-adhesiveness, and non-antigenicity. Here, we review these two distinct substances as well as hybrid structures encompassing both types of carriers. Methods of their synthesis, fundamental properties and mechanisms of formation, and their respective applications are described. Furthermore, we summarize and compare similarities versus differences taking into account unique advantages and disadvantages of these drug delivery carriers. Moreover, rational combination of both carrier types due to their performance complementarity (yin-&yang properties: in general, yin is referred to for definiteness as hard, and yang is broadly taken as soft) is proposed to be used in the so-called hybrid carriers endowing them with even more advanced properties envisioned to be attractive for designing new drug delivery systems.

Alginate: Enhancement Strategies for Advanced Applications

Alginate is an excellent biodegradable and renewable material that is already used for a broad range of industrial applications, including advanced fields, such as biomedicine and bioengineering, due to its excellent biodegradable and biocompatible properties. This biopolymer can be produced from brown algae or a microorganism culture. This review presents the principles, chemical structures, gelation properties, chemical interactions, production, sterilization, purification, types, and alginate-based hydrogels developed so far. We present all of the advanced strategies used to remarkably enhance this biopolymer's physicochemical and biological characteristics in various forms, such as injectable gels, fibers, films, hydrogels, and scaffolds. Thus, we present here all of the material engineering enhancement approaches achieved so far in this biopolymer in terms of mechanical reinforcement, thermal and electrical performance, wettability, water sorption and diffusion, antimicrobial activity, in vivo and in vitro biological behavior, including toxicity, cell adhesion, proliferation, and differentiation, immunological response, biodegradation, porosity, and its use as scaffolds for tissue engineering applications. These improvements to overcome the drawbacks of the alginate biopolymer could exponentially increase the significant number of alginate applications that go from the paper industry to the bioprinting of organs.

Applications of Alginate-Based Nanomaterials in Enhancing the Therapeutic Effects of Bee Products

Since the ancient times, bee products (i.e., honey, propolis, pollen, bee venom, bee bread, and royal jelly) have been considered as natural remedies with therapeutic effects against a number of diseases. The therapeutic pleiotropy of bee products is due to their diverse composition and chemical properties, which is independent on the bee species. This has encouraged researchers to extensively study the therapeutic potentials of these products, especially honey. On the other hand, amid the unprecedented growth in nanotechnology research and applications, nanomaterials with various characteristics have been utilized to improve the therapeutic efficiency of these products. Towards keeping the bee products as natural and non-toxic therapeutics, the green synthesis of nanocarriers loaded with these products or their extracts has received a special attention. Alginate is a naturally produced biopolymer derived from brown algae, the desirable properties of which include biodegradability, biocompatibility, non-toxicity and non-immunogenicity. This review presents an overview of alginates, including their properties, nanoformulations, and pharmaceutical applications, placing a particular emphasis on their applications for the enhancement of the therapeutic effects of bee products. Despite the paucity of studies on fabrication of alginate-based nanomaterials loaded with bee products or their extracts, recent advances in the area of utilizing alginate-based nanomaterials and other types of materials to enhance the therapeutic potentials of bee products are summarized in this work. As the most widespread and well-studied bee products, honey and propolis have garnered a special interest; combining them with alginate-based nanomaterials has led to promising findings, especially for wound healing and skin tissue engineering. Furthermore, future directions are proposed and discussed to encourage researchers to develop alginate-based stingless bee product nanomedicines, and to help in selecting suitable methods for devising nanoformulations based on multi-criteria decision making models. Also, the commercialization prospects of nanocomposites based on alginates and bee products are discussed. In conclusion, preserving original characteristics of the bee products is a critical challenge in developing nano-carrier systems. Alginate-based nanomaterials are well suited for this task because they can be fabricated without the use of harsh conditions, such as shear force and freeze-drying, which are often used for other nano-carriers. Further, conjunction of alginates with natural polymers such as honey does not only combine the medicinal properties of alginates and honey, but it could also enhance the mechanical properties and cell adhesion capacity of alginates.

Preparation of microspheres by alginate purified from Sargassum horneri and study of pH-responsive behavior and drug release

Alginate is a biopolymer used in numerous biomedical applications. The current work describes the purification of alginate from Sargassum horneri and method optimization for formulating drug-loaded microparticles by water-in-oil emulsification/internal gelation. Molecular weights of S. horneri alginate were ranging 50-70 kDa. Among 16 method optimizations, the F4 method was selected for further studies based on shape descriptor parameters which indicated, 0.24 ± 0.01 circularity, 0.80 ± 0.11 roundness, 1.27 ± 0.20 aspect ratio between long and short axis, and less aggregation in PBS. Processing parameters of the F4 method were; CaCO3/alginate ratio of 20/1 (w/w), 5% span 80 in oil (v/v), water/oil phase ratio of 1/20 (v/v), and 1000 rpm emulsification speed. Hollow pores were visible on the surface of dehydrated F4 microparticles. F4 microparticles indicated 41.84 ± 2.93 and 45.86 ± 1.65% encapsulation efficiencies for phloroglucinol (F4P) and indomethacin (F4I) with 32.69 ± 1.35 and 31.69 ± 1.98% loading capacities. These microparticles were found to be desirable for extending drug release over short periods (0-3 days) under pH 2.0-7.4. F4P and F4I were effective in suppressing intracellular reactive oxygen species in FD exposed HaCaT cells while increasing cell viability over 24 - 48 h duration.

Genetic Regulation of Alginate Production in Azotobacter vinelandii a Bacterium of Biotechnological Interest: A Mini-Review

Alginates are a family of polymers composed of guluronate and mannuronate monomers joined by β (1–4) links. The different types of alginates have variations in their monomer content and molecular weight, which determine the rheological properties and their applications. In industry, alginates are commonly used as additives capable of viscosifying, stabilizing, emulsifying, and gelling aqueous solutions. Recently, additional specialized biomedical uses have been reported for this polymer. Currently, the production of alginates is based on the harvesting of seaweeds; however, the composition and structure of the extracts are highly variable. The production of alginates for specialized applications requires a precise composition of monomers and molecular weight, which could be achieved using bacterial production systems such as those based on Azotobacter vinelandii, a free-living, non-pathogenic bacterium. In this mini-review, we analyze the latest advances in the regulation of alginate synthesis in this model.

Injectable adipose-derived stem cells-embedded alginate-gelatin microspheres prepared by electrospray for cartilage tissue regeneration

Objective

To prepare adipose-derived stem cells (ADSCs)-embedded alginate-gelatinemicrospheres (Alg-Gel-ADSCs MSs) by electrospray and evaluate their feasibility for cartilage tissue engineering. To observe the efficacy of Alg-Gel-ADSCs MSs in repairing articular cartilage defects in SD rats.

Methods

ADSCs were isolated and characterized by performing induced differentiation and flow cytometry assays. Alginate-gelatine microspheres with different gelatine concentrations were manufactured by electrospraying, and the appropriate alginate-gelatine concentration and ratio were determined by evaluating microsphere formation. Alg-Gel-ADSCs MSs were compared with Alg-ADSCs MSs through the induction of chondrogenic differentiation and culture. Their feasibility for cartilage tissue engineering was analysed by performing Live/Dead staining, cell proliferation analysis, toluidine blue staining and a glycosaminoglycan (GAG) content analysis. Alg-Gel-ADSCs MSs were implanted in the cartilage defects of SD rats, and the cartilage repair effect was evaluated at different time points. The evaluation included gross observations and histological evaluations, fluorescence imaging tracking, immunohistochemical staining, microcomputed tomography (micro-CT) and a CatWalk evaluation.

Results

The isolated ADSCs showed multidirectional differentiation and were used for cartilage tissue engineering. Using 1.5 w:v% alginate and 0.5 w:v% gelatine (Type B), we successfully prepared nearly spherical microspheres. Compared with alginate microspheres, alginate gel increased the viability of ADSCs and promoted the proliferation and chondrogenesis of ADSCs. In our experiments on knee cartilage defects in SD rats in vivo, the Alg-Gel-ADSCs MSs showed superior cartilage repair in cell resides, histology evaluation, micro-CT imaging and gait analysis.

Conclusions

Microspheres composed of 1.5 w:v% alginate-0.5 w:v% gelatine increase the viability of ADSCs and supported their proliferation and deposition of cartilage matrix components. ADSCs embedded in 1.5 w:v% alginate-0.5 w:v% gelatine microspheres show superior repair efficacy and prospective applications in cartilage tissue repair.

The translational potential of this article

In this study, injectable adipose-derived stem cells-embedded alginate-gelatin microspheres (Alg-Gel-ADSCs MSs) were prepared by the electrospray . Compared with the traditional alginate microspheres, its support ability for ADSCs is better and shows a better repair effect. This study provides a promising strategy for cartilage tissue regeneration.

Instructive Hydrogels for Primary Tumor Cell Culture: Current Status and Outlook

Primary tumor organoids (PTOs) growth in hydrogels have emerged as an important in vitro model that recapitulates many characteristics of the native tumor tissue, and have important applications in fundamental cancer research and for the development of useful therapeutic treatment. This paper begins with reviewing the methods of isolation of primary tumor cells. Then, recent advances on the instructive hydrogels as biomimetic extracellular matrix for primary tumor cell culture and construction of PTO models are summarized. Emerging microtechnology for growth of PTOs in microscale hydrogels and the applications of PTOs are highlighted. This paper concludes with an outlook on the future directions in the investigation of instructive hydrogels for PTO growth.

New Insights of Scaffolds Based on Hydrogels in Tissue Engineering

In recent years, biomaterials development and characterization for new applications in regenerative medicine or controlled release represent one of the biggest challenges. Tissue engineering is one of the most intensively studied domain where hydrogels are considered optimum applications in the biomedical field. The delicate nature of hydrogels and their low mechanical strength limit their exploitation in tissue engineering. Hence, developing new, stronger, and more stable hydrogels with increased biocompatibility, is essential. However, both natural and synthetic polymers possess many limitations. Hydrogels based on natural polymers offer particularly high biocompatibility and biodegradability, low immunogenicity, excellent cytocompatibility, variable, and controllable solubility. At the same time, they have poor mechanical properties, high production costs, and low reproducibility. Synthetic polymers come to their aid through superior mechanical strength, high reproducibility, reduced costs, and the ability to regulate their composition to improve processes such as hydrolysis or biodegradation over variable periods. The development of hydrogels based on mixtures of synthetic and natural polymers can lead to the optimization of their properties to obtain ideal scaffolds. Also, incorporating different nanoparticles can improve the hydrogel's stability and obtain several biological effects. In this regard, essential oils and drug molecules facilitate the desired biological effect or even produce a synergistic effect. This study's main purpose is to establish the main properties needed to develop sustainable polymeric scaffolds. These scaffolds can be applied in tissue engineering to improve the tissue regeneration process without producing other side effects to the environment.

Biodegradable Polymers for Microencapsulation Systems

Environmentally friendly alternatives have become sought after upon the development of scientific research and industrial processes. Recent trends suggest biodegradable polymers as the most promising solution for synthetic microcapsule systems. Safety, efficiency, biocompatibility, and biodegradability are some of the properties that biodegradable systems in microencapsulation can provide for a broad spectrum of applications. The controlled release of encapsulated active agents is a research field that, over the years, has been constantly innovating due to the promising applications in the areas of pharmaceutical, cosmetic, textile industry, among others. This article presents an overview of different polymers with potential for microcapsule synthesis, namely, biodegradable polymers. First, natural polymers are discussed, which are divided into two categories: polysaccharide-based polymers (cellulose, starch, chitosan, and alginate) and protein polymers (gelatin). Second, synthetic polymers are described, where biodegradable polymers such as polyesters, polyamides, among others appear as examples. For each polymer, this review presents its origin, relevant properties, applications, and examples found in the literature regarding its use in biodegradable microencapsulation systems.

Patient-Derived Breast Cancer Tissue Cultures for Anti-Endocrine Drug Assays

Breast cancer is a complex and heterogeneous pathology, characterized by a variety of histological and molecular phenotypes. The majority of the breast cancers express the estrogen receptor alpha (ER), which plays a pivotal role in the pathobiology of the disease and are therefore classified as ER-positive (ER⁺). In fact, targeting of the ER signaling pathway is the main therapeutic strategy for ER⁺ breast cancer. Despite the success of endocrine therapy, intrinsic and acquired resistance are reported in 30-50% of the ER⁺ breast cancers. However, the mechanisms underlying ER heterogeneity and therapeutic resistance are far from being fully disclosed, and efficacious clinical strategies to overcome resistance are still pending. One of the hurdles in studying ER⁺ breast cancer resistance is related with the scarcity of experimental models that can recapitulate ER heterogeneity and signaling. This is the case of ER⁺ breast cancer cell models, typically based on cells derived from metastasis, which also fail to recapitulate tumor complexity. Primary cultures of patient-derived breast cancer cells are difficult to establish, and generally characterized by stromal fibroblasts overgrowth and rapid loss of phenotypic and molecular traits of the tumor cells, including ER expression. Ex vivo cultures of breast cancer tissue have been reported to retain the tissue architecture, with preservation of the tumor microenvironment (TME) and ER expression for short periods of time.Given the cumulating evidence on the role of the TME in sustaining ER⁺ tumor cells, we hypothesized that TME preservation in culture would favor the long-term retention of ER expression and signaling. We employed alginate encapsulation to provide a supporting scaffold to breast cancer tissue microstructures, coupled to dynamic culture to improve the lifespan of the culture by avoiding diffusional limitations. In this chapter, we provide a detailed description of this culture methodology, which has been previously published by our group (Cartaxo et al., J Exp Clin Cancer Res 39:161, 2020), based on electrostatically driven breast cancer tissue encapsulation in alginate, coupled to culture under agitation in a defined culture medium. We also describe challenge of the ex vivo model with an ER activator and inhibitors (anti-endocrine drugs) and a gene expression endpoint of drug response using reverse transcription PCR-based analysis of three distinct genes downstream of ER.

Alginate enriched with phytic acid for hydrogels preparation. Therapeutic applications

In the last decade, numerous innovative strategies have been used to obtain highly efficient synthetic or semi-synthetic biomaterials. Between these innovative biomaterials, hydrogels occupy a distinct place due to their superior biological and physico-chemical characteristics. Alginate is a natural linear polysaccharide with important physico-chemical and biological properties. Recently, we obtained a new hydrogel based on alginate and phytic acid with improved physico-chemical properties. In the present study, the hydrogels previously obtained were tested in terms of their biological properties and possibilities of use in the biomedical field. For this purpose, the hydrogels were loaded with norfloxacin (NRF), an antibacterial compound utilised in the treatment against Gram-negative and Gram-positive organisms. Unfortunately, NRF has low solubility and permeability. In order to provide protection against loss, but also for enhanced bioavailability, and controlled-release of norfloxacin, a drug inclusion complex with cyclodextrin was realized. The effect of complexation on the release profile was highlighted. The addition of NRF to the hydrogel matrices greatly improved the antibacterial activity of the tested compounds. The presence of CD did not affect the homogeneity of the drug distribution. Changes in the polymeric matrix structure were registered after the incorporation of the drug, which were attributed to the relaxation of the network subsequently to the penetration and diffusion of the drug solution simultaneously with the swelling process. The release of NRF from Alg_PA polymeric network has been successfully modulated by the use of CD as a host molecule.

Microfluidic assembly of small-molecule prodrug cocktail nanoparticles with high reproducibility for synergistic combination of cancer therapy

Therapeutic nanoparticles (NPs) self-assembled from small molecular (pro)drug entities, opens up novel avenues for the generation of a wide range of drug delivery systems. Particularly, cocktail NPs created by co-assembly of multiple therapeutics often show profound efficacy beyond their individual agents. However, fabrication of synergistic NPs with high reproducibility and capability to deliver multiple therapeutics in a predefined ratio remains a challenge, which deters NP therapeutics from further clinical translation. In this work, a simple but versatile strategy has been developed to combine drug reconstitution and supramolecular nanoassembly to prodrug cocktail nanoparticle fabrication with microfluidics. Prodrugs reconstructed by PUFAylation were self-assembled into hybrid nanoparticles via microfluidic chip to synergistically deliver two chemotherapeutic drugs, 7-ethyl-10-hydroxy camptothecin (SN38) and paclitaxel (PTX), in a single nanoparticle container. In vitro cell-based assays demonstrate that the combinatorial chemotherapy is superior to each prodrug used alone while reduces the dosage of both drugs at the same time. Furthermore, the double-drug combination suppresses colon tumors by 86% at a total dosage of 16.7 mg/kg through synergy, and histological analysis indicates the safety of the hybrid nanoparticles. In general, this work shows that the nanomedicine synthesized by microfluidics provides considerable advantages including better size control and reproducibility, and great potential in effective combination therapy. It is expected to be applied to the fabrication of more chemical agent combination for other cancer types.

An Overview of Engineered Hydrogel-Based Biomaterials for Improved β-Cell Survival and Insulin Secretion

Islet transplantation provides a promising strategy in treating type 1 diabetes as an autoimmune disease, in which damaged β-cells are replaced with new islets in a minimally invasive procedure. Although islet transplantation avoids the complications associated with whole pancreas transplantations, its clinical applications maintain significant drawbacks, including long-term immunosuppression, a lack of compatible donors, and blood-mediated inflammatory responses. Biomaterial-assisted islet transplantation is an emerging technology that embeds desired cells into biomaterials, which are then directly transplanted into the patient, overcoming the aforementioned challenges. Among various biomaterials, hydrogels are the preferred biomaterial of choice in these transplants due to their ECM-like structure and tunable properties. This review aims to present a comprehensive overview of hydrogel-based biomaterials that are engineered for encapsulation of insulin-secreting cells, focusing on new hydrogel design and modification strategies to improve β-cell viability, decrease inflammatory responses, and enhance insulin secretion. We will discuss the current status of clinical studies using therapeutic bioengineering hydrogels in insulin release and prospective approaches.

Analysis of Safety and Effectiveness of Sodium Alginate/Poly(γ-glutamic acid) Microspheres for Rapid Hemostasis

Most preventable deaths after trauma are related to hemorrhage and occur early after injury. Timely hemostatic treatment is essential to minimize blood loss and improve survival. Among the various treatment methods, the most economical and effective is to use a hemostatic agent. A powdered hemostatic agent can be used for wounds of any shape or depth with high compactness and excellent accumulation effect. Herein, we chose the natural, hydrophilic polymer poly(γ-glutamic acid) (γ-PGA) to form composite hemostatic microspheres with sodium alginate (SA), which show good biocompatibility, water absorptivity, and viscosity. The morphology and structure of the hemostatic microspheres were determined using Fourier transform infrared spectroscopy and scanning electron microscopy. The overall safety, hemolysis, pyrogenic, and intradermal irritation tests were examined. The relationship between hemostatic pressure and hemostatic time during microsphere use was also measured. The hemostatic effect was analyzed with a liver, spleen, and femoral artery bleeding model. The composite microspheres were well tolerated in vivo and exhibited better hemostatic effects in animal experiments than a microporous polysaccharide powder compound. Research results showed that SA/γ-PGA microspheres are materials with good hemostatic effect, high safety, and great potential in clinical applications.

Formulation and Evaluation of Resveratrol Loaded Cubosomal Nanoformulation for Topical Delivery

AIM

The aim of the study was to formulate, characterize, and evaluate the Resveratrol- loaded Cubosomes (RC) for topical application.

BACKGROUND

Resveratrol (RV) is a nutraceutical compound with exciting pharmacological potential in different diseases, including cancers. Many studies on resveratrol have been reported for anti- melanoma activity. Due to its low bioavailability, the therapeutic activities of resveratrol are strongly limited. Hence, an approach with nanotechnology has been made to increase its activity through transdermal drug delivery.

OBJECTIVE

To formulate, characterize, and evaluate the resveratrol-loaded cubosomes (RC). To evaluate Resveratrol-loaded Cubosomal Gel (RC-Gel) for its topical application.

METHODS

RC was formulated by homogenization technique and optimized using a 2-factor 3-level factorial design. Formulated RCs were characterized for particle size, zeta potential, and entrapment efficiency. Optimized RC was evaluated for in vitro release and stability study. Optimized RC was further formulated into cubosomal gel (RC-Gel) using carbopol and evaluated for drug permeation and deposition. Furthermore, developed RC-Gel was evaluated for its topical application using skin irritancy, toxicity, and in vivo local bioavailability studies.

RESULTS

The optimized RC indicated cubic-shaped structure with mean particle size, entrapment efficiency, and zeta potential were 113±2.36 nm, 85.07 ± 0.91%, and -27.40 ± 1.40 mV, respectively. In vitro drug release of optimized RC demonstrated biphasic drug release with the diffusion-controlled release of resveratrol (RV) (87.20 ± 3.91%). The RC-Gel demonstrated better drug permeation and deposition in mice skin layers. The composition of RC-Gel has been proved non-irritant to mice skin. In vivo local bioavailability study depicted the good potential of RC-Gel for skin localization.

CONCLUSION

The RC nanoformulation proposes a promising drug delivery system for melanoma treatment simply through topical application.

Size, shape, charge and "stealthy" surface: Carrier properties affect the drug circulation time in vivo

The present review sets out to discuss recent developments of the effects and mechanisms of carrier properties on their circulation time. For most drugs, sufficient in vivo circulation time is the basis of high bioavailability. Drug carrier plays an irreplaceable role in helping drug avoid being quickly recognized and cleared by mononuclear phagocyte system, to give drug enough time to arrive at targeted organ and tissue to play its therapeutic effect. The physical and chemical properties of drug carriers, such as size, shape, surface charge and surface modification, would affect their in vivo circulation time, metabolic behavior and biodistribution. The final circulation time of carriers is determined by the balance between macrophage recognitions, blood vessel penetration and urine excretion. Therefore, when designing the drug delivery system, we should pay much attention to the properties of drug carriers to get enough in vivo circulation time to arrive at target site eventually. This article mainly reviews the effect of carrier size, size, surface charge and surface properties on its circulation time in vivo, and discusses the mechanism of these properties affecting circulation time. This review has reference significance for the research of long-circulation drug delivery system.

Proper animal experimental designs for preclinical research of biomaterials for intervertebral disc regeneration

Low back pain is a vital musculoskeletal disease that impairs life quality, leads to disability and imposes heavy economic burden on the society, while it is greatly attributed to intervertebral disc degeneration (IDD). However, the existing treatments, such as medicines, chiropractic adjustments and surgery, cannot achieve ideal disc regeneration. Therefore, advanced bioactive therapies are implemented, including stem cells delivery, bioreagents administration, and implantation of biomaterials etc. Among these researches, few reported unsatisfying regenerative outcomes. However, these advanced therapies have barely achieved successful clinical translation. The main reason for the inconsistency between satisfying preclinical results and poor clinical translation may largely rely on the animal models that cannot actually simulate the human disc degeneration. The inappropriate animal model also leads to difficulties in comparing the efficacies among biomaterials in different reaches. Therefore, animal models that better simulate the clinical charateristics of human IDD should be acknowledged. In addition, in vivo regenerative outcomes should be carefully evaluated to obtain robust results. Nevertheless, many researches neglect certain critical characteristics, such as adhesive properties for biomaterials blocking annulus fibrosus defects and hyperalgesia that is closely related to the clinical manifestations, e.g., low back pain. Herein, in this review, we summarized the animal models established for IDD, and highlighted the proper models and parameters that may result in acknowledged IDD models. Then, we discussed the existing biomaterials for disc regeneration and the characteristics that should be considered for regenerating different parts of discs. Finally, well-established assays and parameters for in vivo disc regeneration are explored.

Recent advances in the production of biomedical systems based on polyhydroxyalkanoates and exopolysaccharides

In recent years, growing attention has been devoted to naturally occurring biological macromolecules and their ensuing application in agriculture, cosmetics, food and pharmaceutical industries. They inherently have antigenicity, low immunogenicity, excellent biocompatibility and cytocompatibility, which are ideal properties for the design of biomedical devices, especially for the controlled delivery of active ingredients in the most diverse contexts. Furthermore, these properties can be modulated by chemical modification via the incorporation of other (macro)molecules in a random or controlled way, aiming at improving their functionality for each specific application. Among the wide variety of natural polymers, microbial polyhydroxyalkanoates (PHAs) and exopolysaccharides (EPS) are often considered for the development of original biomaterials due to their unique physicochemical and biological features. Here, we aim to fullfil a gap on the present associated literature, bringing an up-to-date overview of ongoing research strategies that make use of PHAs (poly (3-hydroxybutyrate), poly (3-hydroxybutyrate-co-3-hydroxyvalerate), poly (3-hydroxyoctanoate), poly(3-hydroxypropionate), poly (3-hydroxyhexanoate-co-3-hydroxyoctanoate), and poly (3-hydroxybutyrate-co-3-hydroxyhexanoate)) and EPS (bacterial cellulose, alginates, curdlan, pullulan, xanthan gum, dextran, hyaluronan, and schizophyllan) as sources of interesting and versatile biomaterials. For the first time, a monograph addressing the properties, pros and cons, status, challenges, and recent progresses regarding the application of these two important classes of biopolymers in biomedicine is presented.

Sustained Release Systems for Delivery of Therapeutic Peptide/Protein

Peptide/protein therapeutics have been significantly applied in the clinical treatment of various diseases such as cancer, diabetes, etc. owing to their high biocompatibility, specificity, and therapeutic efficacy. However, due to their immunogenicity, instability stemming from its complex tertiary and quaternary structure, vulnerability to enzyme degradation, and rapid renal clearance, the clinical application of protein/peptide therapeutics is significantly confined. Though nanotechnology has been demonstrated to prevent enzyme degradation of the protein therapeutics and thus enhance the half-life, issues such as initial burst release and uncontrollable release kinetics are still unsolved. Moreover, the traditional administration method results in poor patient compliance, limiting the clinical application of protein/peptide therapeutics. Exploiting the sustained-release formulations for more controllable delivery of protein/peptide therapeutics to decrease the frequency of injection and enhance patient compliance is thus greatly meaningful. In this review, we comprehensively summarize the substantial advancements of protein/peptide sustained-release systems in the past decades. In addition, the advantages and disadvantages of all these sustained-release systems in clinical application together with their future challenges are also discussed in this review.

Alginate microgels as delivery vehicles for cell-based therapies in tissue engineering and regenerative medicine

Conventional stem cell delivery typically utilize administration of directly injection of allogenic cells or domesticated autogenic cells. It may lead to immune clearance of these cells by the host immune systems. Alginate microgels have been demonstrated to improve the survival of encapsulated cells and overcome rapid immune clearance after transplantation. Moreover, alginate microgels can serve as three-dimensional extracellular matrix to support cell growth and protect allogenic cells from rapid immune clearance, with functions as delivery vehicles to achieve sustained release of therapeutic proteins and growth factors from the encapsulated cells. Besides, cell-loaded alginate microgels can potentially be applied in regenerative medicine by serving as injectable engineered scaffolds to support tissue regrowth. In this review, the properties of alginate and different methods to produce alginate microgels are introduced firstly. Then, we focus on diverse applications of alginate microgels for cell delivery in tissue engineering and regenerative medicine.

Synthesis of hierarchical and flower-like TiO2 nanowire microspheres as biocompatible cell carriers

Fibrous materials are of great interest in the development of tissue regenerative matrix. However, synthesis of inorganic fibrous microspheres as cell carriers is a great challenge. In this study, we for the first time report on the synthesis of novel hierarchical and flower-like TiO₂ nanowire (NW) microspheres as biocompatible cell carriers. TiO₂ NW microspheres were synthesized through in situ alkali hydrothermal treatment of the TiO₂ nanoparticle (NP) microspheres and their microstructure, formation mechanism and in vitro biocompatibility were evaluated. SEM observations show that the resulting TiO₂ NW microspheres were constructed by a large number of NWs with the diameter of 10-20 nm and exhibited a flower-like and hierarchical morphology with the diameter of 400-600 μm. XRD patterns indicate that TiO₂ NW microspheres were constructed by both rutile and anatase phase of TiO₂. FT-IR spectra reveal that Ti-O-Ti bonds were involved in TiO₂ NW microspheres. In vitro biocompatibility was evaluated by seeding the fibroblast L929 cells on the microspheres. A conventional MTT assay quantitatively indicates that the TiO₂ NW microspheres favored adhesion and proliferation of cells and were biocompatible, while SEM observations qualitatively confirmed that the cells were well grown on the surface of TiO₂ NW microspheres. Thus, the as-synthesized TiO₂ NW microspheres would be applicable to novel and biocompatible cell carriers.

Biomaterial-based platforms for cancer stem cell enrichment and study

Cancer stem cells (CSCs) are a relatively rare subpopulation of tumor cell with self-renewal and tumorigenesis capabilities. CSCs are associated with cancer recurrence, progression, and chemoradiotherapy resistance. Establishing a reliable platform for CSC enrichment and study is a prerequisite for understanding the characteristics of CSCs and discovering CSC-related therapeutic strategies. Certain strategies for CSC enrichment have been used in laboratory, particularly fluorescence-activated cell sorting (FACS) and mammosphere culture. However, these methods fail to recapitulate the in vivo chemical and physical conditions in tumors, thus potentially decreasing the malignancy of CSCs in culture and yielding unreliable research results. Accumulating research suggests the promise of a biomaterial-based three-dimensional (3D) strategy for CSC enrichment and study. This strategy has an advantage over conventional methods in simulating the tumor microenvironment, thus providing a more effective and predictive model for CSC laboratory research. In this review, we first briefly discuss the conventional methods for CSC enrichment and study. We then summarize the latest advances and challenges in biomaterial-based 3D CSC platforms. Design strategies for materials, morphology, and chemical and physical cues are highlighted to provide direction for the future construction of platforms for CSC enrichment and study.

Recent progress and challenges for polymeric microsphere compared to nanosphere drug release systems: Is there a real difference?

Polymeric microspheres (MSs) and nanospheres (NSs) composed of synthetic and natural polymers can encapsulate anticancer drugs, among other therapeutics, acting as drug carriers to release them at controlled rates over long periods of time. These carriers present several potential advantages including simple preparation methods, suitable control over the sustained release of medications or stem cells, triggered release resulting from stimulus-responsive delivery, improved physical properties such as porosity and stable scaffolds for tissue engineering, and possible applications as microreactors and nanoreactors compared to conventional drug delivery systems. Moreover, many of these factors can impact drug release rates by polymeric MSs and NSs. Herein, drug delivery systems based on polymeric MSs and NSs are described and compared according to recent advances and challenges, and poignant thoughts on what the field needs to progress are presented.