Physical and antimicrobial properties of chitosan–tea tree essential oil composite films

Synthesis, Characterization, and Histological Evaluation of Chitosan-Ruta Graveolens Essential Oil Films

The development of new biocompatible materials for application in the replacement of deteriorated tissues (due to accidents and diseases) has gained a lot of attention due to the high demand around the world. Tissue engineering offers multiple options from biocompatible materials with easy resorption. Chitosan (CS) is a biopolymer derived from chitin, the second most abundant polysaccharide in nature, which has been highly used for cell regeneration applications. In this work, CS films and Ruta graveolens essential oil (RGEO) were incorporated to obtain porous and resorbable materials, which did not generate allergic reactions. An oil-free formulation (F1: CS) and three different formulations containing R. graveolens essential oil were prepared (F2: CS-RGEO 0.5%; F3: CS+RGEO 1.0%; and F4: CS+RGEO 1.5%) to evaluate the effect of the RGEO incorporation in the mechanical and thermal stability of the films. Infrared spectroscopy (FTIR) analyses demonstrated the presence of RGEO. In contrast, X-ray diffraction (XRD) and differential scanning calorimetry (DSC) analysis showed that the crystalline structure and percentage of CS were slightly affected by the RGEO incorporation. Interesting saturation phenomena were observed for mechanical and water permeability tests when RGEO was incorporated at higher than 0.5% (v/v). The results of subdermal implantation after 30 days in Wistar rats showed that increasing the amount of RGEO resulted in greater resorption of the material, but also more significant inflammation of the tissue surrounding the materials. On the other hand, the thermal analysis showed that the RGEO incorporation almost did not affect thermal degradation. However, mechanical properties demonstrated an understandable loss of tensile strength and Young’s modulus for F3 and F4. However, given the volatility of the RGEO, it was possible to generate a slightly porous structure, as can be seen in the microstructure analysis of the surface and the cross-section of the films. The cytotoxicity analysis of the CS+RGEO compositions by the hemolysis technique agreed with in vivo results of the low toxicity observed. All these results demonstrate that films including crude essential oil have great application potential in the biomedical field.

Chitosan-based melatonin bilayer coating for maintaining quality of fresh-cut products

This work was designed to develop the chitosan-based melatonin layer-by-layer assembly (CMLLA) via the inclusion method. The structural characterizations and interaction present in CMLLA were investigated by the scanning electron microscope (SEM), X-ray diffraction (XRD) and Fourier Transform-Infrared spectroscopy (FTIR). The ratio of chitosan (CH) to carboxymethylcellulose (CMC) greatly influenced the mechanical properties, including the tensile strength, moisture content and color performance. Results showed that both antioxidant and antimicrobial properties of CMLLA were enhanced with the addition of melatonin (MLT). Furthermore, it was demonstrated that the CMLLA with 1.2 % (w/v) CH, 0.8 % (w/v) CMC and 50 mg/L MLT better contributed to the delay of chlorophyll degradation and the maintenance of shelf-life quality. Results from this study might open up new insights into the approaches of quality improvement of postharvest fresh products by incorporating the natural antioxidant compounds into natural polymers.

Antibacterial Films Based on PVA and PVA-Chitosan Modified with Poly(Hexamethylene Guanidine)

In this study, thin, polymeric films consisting of poly(vinyl alcohol) (PVA) and chitosan (Ch) with the addition of poly(hexamethylene guanidine) (PHMG) were successfully prepared. The obtained materials were analyzed to determine their physicochemical and biocidal properties. In order to confirm the structure of PHMG, nuclear magnetic resonance spectroscopy (1H NMR) was applied, while in the case of the obtained films, attenuated total reflectance infrared spectroscopy with Fourier transform (FTIR-ATR) was used. The surface morphology of the polymer films was evaluated based on atomic force microscopy. Furthermore, the mechanical properties, color changes, and thermal stability of the obtained materials were determined. Microbiological tests were performed to evaluate the biocidal properties of the new materials with and without the addition of PHMG. These analyses confirmed the biocidal potential of films modified by PHMG and allowed for comparisons of their physicochemical properties with the properties of native films. In summary, films consisting of PVA and PHMG displayed higher antimicrobial potentials against Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria in comparison to PVA:Ch-based films with the addition of PHMG.

Alginate Films Encapsulating Lemongrass Essential Oil as Affected by Spray Calcium Application

The necessity of producing innovative packaging systems has directed the attention of food industries towards the use of biodegradable polymers for developing new films able to protect foods and to extend their shelf-life, with lower environmental impact. In particular, edible films combining hydrophilic and hydrophobic ingredients could retard moisture loss, gas migration and ensure food integrity, reducing the necessity of using synthetic plastics. Alginate-based films obtained from emulsions of lemongrass essential oil (at 0.1% and 0.5%) in aqueous alginate solutions (1%), with Tween 80 as surfactant (0.3%), were obtained by casting and characterized as to microstructure and thermal behavior, as well as tensile, barrier and optical properties. Films were also crosslinked through spraying calcium chloride onto the film surface and the influence of oil emulsification and the crosslinking effect on the final film properties were evaluated. The film microstructure, analyzed through Field Emission Scanning Electron Microscopy (FESEM) revealed discontinuities in films containing essential oil associated with droplet flocculation and coalescence during drying, while calcium diffusion into the matrix was enhanced. The presence of essential oil reduced the film stiffness whereas calcium addition lowered the film’s water solubility, increasing tensile strength and reducing the extensibility coherent with its crosslinking effect.

Functional characterization of biopolymer based composite film: Incorporation of natural essential oils and antimicrobial agents

Rosemary (REO), mint essential oil (MEO), nisin and lactic acid were incorporated at 0.5% to develop a novel functional packaging film including chitosan pectin and starch polymers (0.75:1.5:0.75 w/w). Inclusion of REO and nisin significantly (p ≤ 0.05) improved water barrier properties (0.014 g.mm/m²24h), tensile strength (25.95 MPa) and thermal stability as compared to control. ATR-FTIR spectra and XRD pattern elucidated structural interaction between EO's and biocomposite films. Addition of REO of and nisin increased microsctructural heterogeneity and opacity (2.78). Incorporation of REO and nisin exhibited the highest inhibitory activity against all tested pathogenic strains (Bacillus subtilis, Escherichia coli, and Listeria monocytogenes). The antioxidant properties of biocomposite films were analyzed using reducing power, metal chelation, DPPH and ABTS radical scavenging assays, which enhanced significantly (p ≤ 0.05) with the addition of MEO and REO. This study validated that incorporation of natural additives in active biocomposite films offers promising functional ingredients for packaging materials for various food applications.

Improving the Efficacy of Essential Oils as Antimicrobials in Foods: Mechanisms of Action

The consumer preference for clean-label products is requiring the food industry to reformulate their products by replacing artificial additives with natural alternatives. Essential oils are natural antimicrobials isolated from plant sources that have the potential to combat many foodborne pathogens and spoilage organisms. This review begins by discussing the antimicrobial properties of essential oils, the relationships between their chemical structure and antimicrobial efficacy, and their potential limitations for commercial applications (such as strong flavor, volatility, and chemical instability). We then review the commonly used methods for screening the antimicrobial efficacy of essential oils and elucidating their mechanisms of action. Finally, potential applications of essential oils as antimicrobials in foods are reviewed and the major types of food-grade delivery systems available for improving their efficacy are discussed.

Chitosan Coating Inhibits the Growth of Listeria monocytogenes and Extends the Shelf Life of Vacuum-Packed Pork Loins at 4 °C

Chitosan coating is a promising method for food preservation. This study aims to fill the data gap regarding the application of chitosan (1% and 2%) on vacuum-packed fresh pork stored at 4 °C for 28 days, with particular attention on the effect on Listeria monocytogenes, inoculated as a cocktail of three strains. Chitosan at both concentrations was able to significantly reduce L. monocytogenes counts by more than 1.5 Log CFU/g with respect to control; moreover, it inhibited the growth of mesophilic bacteria and was particularly effective on lactic acid bacteria and yeasts. The beneficial effects on shelf life were demonstrated by both panel test and pH evolution. In fact, panellists did not detect any sensory difference between samples treated with 1% chitosan and control up to 14 days of storage, while after 28 days, a pungent flesh odour was perceived in control samples only. Interestingly, at aw values of fresh meat (0.984), the chitosan coating exhibited a liquid behaviour, with a dynamic viscosity of 229.4 ± 4.2 mPa/s. Chitosan coating applied on vacuum-packed pork loins contained L. monocytogenes growth and improved the microbiological characteristics of the product, with a beneficial effect on product shelf life.

Synthesis and antibacterial properties of thymol and carvacrol grafted onto lignocellulosic kraft fibers

Bacterial infections and surface contaminations are worrying public health issues. It becomes urgent to find solutions. One of the ways to limit bacterial proliferation is to develop new antimicrobial materials. The phenolic compounds of essential oils like thymol and carvacrol, are attractive antibacterial candidates, which have gained great popularity in the food, cosmetic, and pharmaceutical industries. This work describes the elaboration of bioinspired antibacterial materials. Thymol and carvacrol are linked to kraft pulp fibers, via triazine link. This novel material has been investigated for its antibacterial properties against Escherichia coli and Staphylococcus aureus. The developed materials show very interesting antibacterial activity. The grafting of thymol and carvacrol by covalent bond allows to avoid the problem of their release and, thus, could maintain the antibacterial properties of support.

Use of response surface methodology (RSM) to optimize pea starch-chitosan novel edible film formulation

The aim of this study was to develop an optimal formulation for preparation of edible films from chitosan, pea starch and glycerol using response surface methodology. Three independent variables were assigned comprising chitosan (1-2%), pea starch (0.5-1.5%) and glycerol (0.5-1%) to design an empirical model best fit in physical, mechanical and barrier attributes. Impacts of independent variables on thickness, moisture content, solubility, tensile strength, elastic modulus, elongation at break and water vapor permeability of films were evaluated. All the parameters were found to have significant effects on physical and mechanical properties of film. The optimal formulation for preparation of edible film from chitosan, pea starch and glycerol was 1% chitosan, 1.5% pea starch and 0.5% glycerol. Edible films with good physical and mechanical properties can be prepared with this formulation and thus this formulation can be further applied for testing on coating for fruit and vegetables.

Antimicrobial and physical properties of chitosan films incorporated with turmeric extract

In this study, the effects of turmeric extract incorporation on the antibacterial and physical properties of the chitosan films were evaluated. Turmeric containing chitosan-based film was produced with casting procedure and cross-linked with sodium sulfate. Mechanical, optical, thermal properties, and water vapor permeability of the films were studied. The addition of turmeric to chitosan film significantly increased the tensile strength of the film and improved the ultraviolet-visible light barrier of the film. Infrared spectroscopy analysis suggested an interaction between the phenolic compounds of the extract and amin group of chitosan. Antimicrobial activity of the chitosan films was studied against Salmonella and Staphylococcus aureus by plate count agar technique and a better antimicrobial activity was observed with turmeric incorporation. Turmeric incorporated chitosan films with enhanced antimicrobial activity and film stiffness can be suggested as a promising application for food packaging.

Comparative Analysis of the Composition and Active Property Evaluation of Certain Essential Oils to Assess their Potential Applications in Active Food Packaging

The antifungal, antibacterial, and antioxidant activity of four commercial essential oils (EOs) (thyme, clove, rosemary, and tea tree) from Romanian production were studied in order to assess them as bioactive compounds for active food packaging applications. The chemical composition of the oils was determined with the Folin-Ciocâlteu method and gas chromatography coupled with mass spectrometry and flame ionization detectors, and it was found that they respect the AFNOR/ISO standard limits. The EOs were tested against three food spoilage fungi-Fusarium graminearum, Penicillium corylophilum, and Aspergillus brasiliensis-and three potential pathogenic food bacteria-Staphylococcus aureus, Escherichia coli, and Listeria monocytogenes-using the disc diffusion method. It was found that the EOs of thyme, clove, and tea tree can be used as antimicrobial agents against the tested fungi and bacteria, thyme having the highest inhibitory effect. Concerning antioxidant activity determined by 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis 3-ethylbenzthiazoline-6-sulfonic acid (ABTS) methods, it has been established that the clove oil exhibits the highest activity because of its high phenolic content. Promising results were obtained by their incorporation into chitosan emulsions and films, which show potential for food packaging. Therefore, these essential oils could be suitable alternatives to chemical additives, satisfying the consumer demand for naturally preserved food products ensuring its safety.

Encapsulation of tea tree oil by amorphous beta-cyclodextrin powder

An innovative method to encapsulate tea tree oil (TTO) by direct complexation with solid amorphous beta-cyclodextrin (β-CD) was investigated. A β-CD to TTO ratio of 90.5:9.5 (104.9mg TTO/g β-CD) was used in all complexation methods. The encapsulation was performed by direct mixing, and direct mixing was followed by the addition of water (13-17% moisture content, MC) or absolute ethanol (1:1, 1:2, 1:3 and 1:4 TTO:ethanol). The direct mixing method complexed the lowest amount of TTO (60.77mg TTO/g β-CD). Powder recrystallized using 17% MC included 99.63mg of TTO/g β-CD. The addition of ethanol at 1:2 and 1:3 TTO:ethanol ratios resulted in the inclusion of 94.3 and 98.45mg of TTO/g β-CD respectively, which was similar to that of TTO encapsulated in the conventional paste method (95.56mg TTO/g β-CD), suggesting an effective solid encapsulation method. The XRD and DSC results indicated that the amorphous TTO-β-CD complex was crystallized by the addition of water and ethanol.

Chitosan films and coatings containing essential oils: The antioxidant and antimicrobial activity, and application in food systems

Chitosan edible films and coatings have shown great promise for their application in food preservation and also are promising systems to be used as essential oil (EO) carriers. This review reports the most recent and relevant studies concerning chitosan films and coatings containing EOs. The effect of EO incorporation on the antioxidant, antibacterial and antifungal activities of chitosan films and coatings in vitro and in vivo, as well as their applications in food systems have been discussed. In general, incorporation of EOs significantly increased the antioxidant, antibacterial and antifungal efficacy of chitosan films and coatings in vitro. EO-incorporated films and coatings also showed greater effectiveness against postharvest fungi and foodborne bacteria in food systems than pure films and coatings. The application of chitosan films and coatings containing EOs usually led to an extension of the shelf-life and reduction of lipid peroxidation of fish and meat products over pure chitosan films and coatings. In addition, chitosan coatings incorporated with EOs were more effective in maintaining fruit and vegetable quality, and controlling their postharvest decay during storage and shelf life than pure chitosan coatings.

Evaluation of the antibacterial and antioxidant activities of chitosan edible films incorporated with organic essential oils obtained from four Thymus species

The aims of this study were to evaluate, (1) the antibacterial properties, (2) the total phenol content and (3) the antioxidant activity, of chitosan edible films incorporated with certified organic essential oils (EOs) obtained from Thymus zygis, Thymus mastichina, Thymus capitatus and Thymus vulgaris. The agar disc diffusion method was used to determine the antibacterial activities of chitosan edible films while for the antioxidant activity, two different analytical assays were used (DPPH and FRAP). As regard antibacterial activity, films containing only chitosan were not effective against any of tested bacteria. Chitosan films containing T. capitatus EO (CH + TCEO) was more effective against Listeria innocua and Alcaligenes faecalis whilst chitosan films containing T. mastichina EO (CH + TMEO) had the highest inhibition halos against Serratia marcescens. For and Enterobacter amnigenus no antibacterial activity was achieved. Chitosan films added with Thymus essential oils showed antioxidant activity, at all concentrations and with all methods assayed. CH + TZEO had the highest antioxidant activity revealed with DPPH assay. However in CH + TCEO showed best antioxidant effect when assessed with FRAP assay. The results showed that chitosan edible films incorporated with organic Thymus EOs could be used as active films in food industry due to its antibacterial and antioxidant activities.