The materials science of collagen

A rethinking of collagen as tough biomaterials in meat packaging: assembly from native to synthetic

Due to the high moisture-associated typical rheology and the changeable and harsh processing conditions in the production process, packaging materials for meat products have higher requirements including a sufficient mechanical strength and proper ductility. Collagen, a highly conserved structural protein consisting of a triple helix of Gly-X-Y repeats, has been proved to be suitable packaging material for meat products. The treated animal digestive tract (i.e. the casing) is the perfect natural packaging material for wrapping meat into sausage. Its thin walls, strong toughness and impact resistance make it the oldest and best edible meat packaging. Collagen casing is another wisdom of meat packaging, which is made by collagen fibers from hide skin, presenting a rapid growth in casing market. To strengthen mechanical strength and barrier behaviors of collagen-based packaging materials, different physical, chemical, and biological cross-linking methods are springing up exuberantly, as well as a variety of reinforcement approaches including nanotechnology. In addition, the rapid development of biomimetic technology also provides a good research idea and means for the promotion of collagen's assembly and relevant mechanical properties. This review can offer some reference on fundamental theory and practical application of collagenous materials in meat products.

Tissue engineered bone via templated hBMSCs mineralization and its application for bone repairing

To develop bone implants, a novel tissue-engineered bone was constructed via templated human bone mesenchymal stem cells (hBMSCs) mineralization. Firstly, an osteoid-like template (Os-template) with aligned collagen fibers was prepared and followed by seeding hBMSCs to mimic the process of bone formation. After being cultured over weeks, the cells produced collagen fibers in an orderly aligned osteomorphic fashion. Further, a novel tissue-engineered bone with mineralized collagen fiber (mOs-ECM) was subsequently achieved after cell mineralization, showing a high degree of osteomimicry in terms of both composition and structure. When applied to the rat cranial bone defect model, the mOs-ECM significantly promoted the new bone formation and fused with the host bone. The study indicated that microscopic cell mineralization could be guided by artificially designed templates and successfully fabricated a macroscopic implant with a pronounced effect on bone repairing.

Novel Trends in Hydrogel Development for Biomedical Applications: A Review

Nowadays, there are still numerous challenges for well-known biomedical applications, such as tissue engineering (TE), wound healing and controlled drug delivery, which must be faced and solved. Hydrogels have been proposed as excellent candidates for these applications, as they have promising properties for the mentioned applications, including biocompatibility, biodegradability, great absorption capacity and tunable mechanical properties. However, depending on the material or the manufacturing method, the resulting hydrogel may not be up to the specific task for which it is designed, thus there are different approaches proposed to enhance hydrogel performance for the requirements of the application in question. The main purpose of this review article was to summarize the most recent trends of hydrogel technology, going through the most used polymeric materials and the most popular hydrogel synthesis methods in recent years, including different strategies of enhancing hydrogels’ properties, such as cross-linking and the manufacture of composite hydrogels. In addition, the secondary objective of this review was to briefly discuss other novel applications of hydrogels that have been proposed in the past few years which have drawn a lot of attention.

Collagen Extraction from Animal Skin

Simple Summary

Collagen is useful in many applications including cosmetics, medicine, yarn production and packaging. Collagen can be recovered from skins of animals raised for meat. Here, we review methods for the extraction and purification of collagen from animal skins.

Abstract

Collagen is the most abundant structural protein in animals. It is the major component of skin. It finds uses in cosmetics, medicine, yarn production and packaging. This paper reviews the extraction of collagen from hides of most consumed animals for meat with the focus on literature published since 2000. The different pretreatment and extraction techniques that have been investigated for producing collagen from animal skins are reviewed. Pretreatment by enzymatic, acid or alkaline methods have been used. Extraction by chemical hydrolysis, salt solubilization, enzymatic hydrolysis, ultrasound assisted extraction and other methods are described. Post-extraction purification methods are also explained. This compilation will be useful for anyone wishing to use collagen as a resource and wanting to further improve the extraction and purification methods.

Extraction and characterization of bovine collagen Type V and its effects on cell behaviors

Collagen Type V (Col. V) plays an essential role in cell behaviors and has attracted increasing attention in recent years. High-purity Col. V is needed for evaluating its biological properties. In this research, the enzymatic hydrolysis process was combined with ultrafiltration to purify Col. V from the bovine cornea. The purity of Col. V was determined to be above 90% by both sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and high-performance liquid chromatography methods. The effect of Col. V on cell behaviors was evaluated. The circular dichroism spectroscopy results demonstrated that the extracted Col. V exhibited a complete triple helix structure. SDS-PAGE suggested that the molecular weight of Col. V was 440 kDa. The self-assembly experiment revealed that the proportion of Col. V in the collagen mixture can affect the Col. I fiber diameter. The cell culture results implied that Col. V can inhibit fibroblasts (L929) proliferation. The L929 showed maximum mobility when the addition of Col. V was 30%. Thus, Col. V has the effect of inhibiting L929 proliferation and promoting migration. The high-purity Col. V provides useful information for further understanding its biological implications.

Distinct contributions of ECM proteins to basement membrane mechanical properties in Drosophila

The basement membrane is a specialized extracellular matrix (ECM) that is crucial for the development of epithelial tissues and organs. In Drosophila, the mechanical properties of the basement membrane play an important role in the proper elongation of the developing egg chamber; however, the molecular mechanisms contributing to basement membrane mechanical properties are not fully understood. Here, we systematically analyze the contributions of individual ECM components towards the molecular composition and mechanical properties of the basement membrane underlying the follicle epithelium of Drosophila egg chambers. We find that the Laminin and Collagen IV networks largely persist in the absence of the other components. Moreover, we show that Perlecan and Collagen IV, but not Laminin or Nidogen, contribute greatly towards egg chamber elongation. Similarly, Perlecan and Collagen, but not Laminin or Nidogen, contribute towards the resistance of egg chambers against osmotic stress. Finally, using atomic force microscopy we show that basement membrane stiffness mainly depends on Collagen IV. Our analysis reveals how single ECM components contribute to the mechanical properties of the basement membrane controlling tissue and organ shape.

Strain-stiffening seal

An elastomeric seal needs to be soft to accommodate installation but stiff to block fluid flow. Here we show that the two requirements are better fulfilled by a strain-stiffening elastomer than a neo-Hookean elastomer. We represent the strain-stiffening elastomer using the Gent model, and calculate the deformation in the elastomeric seal using an approach analogous to the lubrication theory of a viscous fluid between rigid walls. We determine the sealing pressure on the basis of two modes of leak. The seal leaks by elastic deformation when the fluid pressure exceeds the contact pressure between the seal and the rigid wall. The seal leaks by rupture when the energy release rate of a crack exceeds the toughness of the elastomer. For both modes of leak, a strain-stiffening elastomer enhances the sealing pressure compared to a neo-Hookean elastomer. We construct diagrams in which the two modes of leak are demarcated. It is hoped that this study will aid in the development of materials and geometries of seals.

Exploring the Mechanical Properties and Performance of Type-I Collagen at Various Length Scales: A Progress Report

Collagen is the basic protein of animal tissues and has a complex hierarchical structure. It plays a crucial role in maintaining the mechanical and structural stability of biological tissues. Over the years, it has become a material of interest in the biomedical industries thanks to its excellent biocompatibility and biodegradability and low antigenicity. Despite its significance, the mechanical properties and performance of pure collagen have been never reviewed. In this work, the emphasis is on the mechanics of collagen at different hierarchical levels and its long-term mechanical performance. In addition, the effect of hydration, important for various applications, was considered throughout the study because of its dramatic influence on the mechanics of collagen. Furthermore, the discrepancies in reports of the mechanical properties of collagenous tissues (basically composed of 20-30% collagen fibres) and those of pure collagen are discussed.

Devising Bone Molecular Models at the Nanoscale: From Usual Mineralized Collagen Fibrils to the First Bone Fibers Including Hydroxyapatite in the Extra-Fibrillar Volume

At the molecular scale, bone is mainly constituted of type-I collagen, hydroxyapatite, and water. Different fractions of these constituents compose different composite materials that exhibit different mechanical properties at the nanoscale, where the bone is characterized as a fiber, i.e., a bundle of mineralized collagen fibrils surrounded by water and hydroxyapatite in the extra-fibrillar volume. The literature presents only models that resemble mineralized collagen fibrils, including hydroxyapatite in the intra-fibrillar volume only, and lacks a detailed prescription on how to devise such models. Here, we present all-atom bone molecular models at the nanoscale, which, differently from previous bone models, include hydroxyapatite both in the intra-fibrillar volume and in the extra-fibrillar volume, resembling fibers in bones. Our main goal is to provide a detailed prescription on how to devise such models with different fractions of the constituents, and for that reason, we have made step-by-step scripts and files for reproducing these models available. To validate the models, we assessed their elastic properties by performing molecular dynamics simulations that resemble tensile tests, and compared the computed values against the literature (both experimental and computational results). Our results corroborate previous findings, as Young’s Modulus values increase with higher fractions of hydroxyapatite, revealing all-atom bone models that include hydroxyapatite in both the intra-fibrillar volume and in the extra-fibrillar volume as a path towards realistic bone modeling at the nanoscale.

Collagen Fibril-Assembled Skin-Simulated Membrane for Continuous Molecular Separation

A skin-simulated thin-film-composite membrane was fabricated using a vacuum-assisted interfacial polymerization method. A negatively charged surface-selective layer on a polyacrylonitrile (PAN) substrate was cross-linked using trimesoyl chloride to form polyamide and polyester with a three-layer structure that was similar to skin. The loading of collagen fibrils assembled on the membrane surface was varied, and a selective layer was obtained, of which the thickness, morphology, and hydrophilicity can be manipulated. The optimal membrane decorated with 0.5 mg of collagen fibril had a selective layer thickness of around 130 nm with pure water permeability up to 84.7 LMH bar^-1. Furthermore, the membrane exhibited impressive rejections toward dyes (Congo red with a molecular weight of 696.68 Da: 99.6%, reactive blue 19 with a molecular weight of 626.54 Da: 99.8%, and Coomassie blueG-250 with a molecular weight of 854.02 Da: 98.6%) while high permeations of Na₂SO₄ and NaCl were achieved. This facile strategy provides a useful guideline for constructing bionic membranes through biomaterials.

The Concept of a Rupture Risk Envelope for the Cochleo-Saccular Membranes

Introduction  Alterations in endolymphatic pressure have long been suspected of being associated with the development of endolymphatic hydrops and rupture of the membranous labyrinth. More recently, there has been a focus on how membrane mechanics might contribute to membrane rupture. This is suspected to involve the viscoelastoplastic properties of these membranes.

Objective  To construct a rupture risk envelope for the cochleo-saccular membranes based on viscoelastoplasticity to provide insight into lesion behavior in Meniere disease.

Methods  Reported deformation data from a collagen model of the cochleo-saccular membranes was utilized. Yield stress was defined as 80% of ultimate failure stress. The yield points at various strain rates were used to construct a rupture risk envelope for the membranes.

Results  The rupture risk envelope was found to be downward sloping in configuration. At the highest strain rate of 385% per minute, the membrane yield was associated with greater stress (7.0 kPa) and lesser strain (30%); while at the lowest strain rate of 19.2% per minute, there was substantially less membrane yield stress (4.3 kPa) but it was associated with greater strain (44%).

Conclusion  The concept of a rupture risk envelope based on viscoelastoplasticity provides insight into hydropic lesion behavior in Meniere disease. This concept helps to explain how variations in membrane distensibility might occur as suspected in the double hit theory of lesion generation in Meniere disease. Slowly developing lesions would appear have a lower rupture risk while rapidly developing lesions would appear to have a greater risk of early membrane rupture.

Varying Synthesis Conditions and Comprehensive Characterization of Fluorine-Doped Hydroxyapatite Nanocrystals in a Simulated Body Fluid

Bone supports animal bodies, is the place where blood is produced, and is essential for the immune system, among other important functions. The dominant inorganic component in bone is hydroxyapatite (Hap), the structure and dynamics of which still pose many unsolved puzzles. An updated understanding of HAp is of great significance to osteology, dentistry, and the development of artificial bone and other biomaterials. In this work, HAp nanoparticles were synthesized with the wet chemical precipitation method and their structure and morphologies were controlled by varying pH and adding fluoride ions by two different routes: (1) fluoride ions were added during synthesis, and (2) fluoride ions were introduced after the samples were synthesized by soaking the samples in solutions with fluoride ions. XRD and HRTEM were employed to confirm the composition and structure, while various multinuclear (1H, 19F, 31P) solid-state nuclear magnetic resonance (NMR) methods including 1D single pulse, cross-polarization under magic-angle spinning (CPMAS), and 2D heteronuclear correlation (HETCOR) were used to characterize the structure, morphology, and dynamics, validating the general core-shell morphology in these F-HAp samples. It was found that all hydroxide ions were substituted when the fluoride ion concentration was above 0.005 M. An NMR peak corresponding to water structure emerged and the bulk water peak was shifted upfield, indicating that fluoride substitution modifies both the crystalline core and the amorphous shell of F-HAp nanoparticles. With the second route of fluoride substitution, increases in soaking time or fluoride ion concentration could increase fluoride substitution in HAp, but could not achieve complete substitution. Finally, with 1H-31P CPMAS and HETCOR, it was established that there are two types of phosphorous, one in the crystalline core (PO43−) and the other in the amorphous shell (HPO42−). These results are valuable for clarifying the fluoride substitution mechanism in HAp in biomaterials or in organisms, and provide insights for developing next generation replacement materials for bone, tooth, or coating films, drug delivery systems, etc.

Comparative evaluation of two collagen-based biomaterials with different compositions used for bone graft: An experimental animal study

A large number of materials with different compositions and shapes have been proposed and studied for the purpose of bone tissue regeneration. Collagen-based materials have shown promising results for this application, with improved physicochemical properties. The aim of the present in vivo animal study was to evaluate and compare two commercially available collagen-based biomaterials for bone regeneration, with these being implanted in circumferential bone defects created in the calvarium of rabbits. Twenty rabbits received bilateral parietal osteotomies, performed with the aid of a 6.5 mm diameter trephine. Two groups were created: the BC group, where the defect was filled with a scaffold composed of 90% bovine bone particles and 10% porcine collagen, and the EG group, where the defect was filled with a scaffold composed of 75% hydroxyapatite particles of bovine origin and 25% bovine collagen. Ten animals were sacrificed at 30 days and another 10 at 45 days after implantation, and the samples were processed and histologically analyzed. In the evaluations of the samples at 30 days, no important differences were found in the results. However, in the samples at 45 days after surgery, the EG group showed better results than the BC group samples, mainly in terms of the amount of bone matrix formation (P < 0.0001) and the volume in area measured in each sample, where the EG group had a value 65% higher than that in the BC group samples. Based on the results obtained, we conclude that the amount of collagen and the particle characteristics present in the composition of the scaffolds can directly influence the amount of neoformation and/or bone regeneration.

A leather-based electrolyte for all-in-one configured flexible supercapacitors

Leather based gel electrolytes were prepared from the top down method, and integrated flexible supercapacitors were developed by this method.

Effects of dentin surface preparations on bonding of self-etching adhesives under simulated pulpal pressure

Objectives

This study evaluated the effects of different smear layer preparations on the dentin permeability and microtensile bond strength (µTBS) of 2 self-etching adhesives (Clearfil SE Bond [CSE] and Clearfil Tri-S Bond Universal [CTS]) under dynamic pulpal pressure.

Materials and Methods

Human third molars were cut into crown segments. The dentin surfaces were prepared using 4 armamentaria: 600-grit SiC paper, coarse diamond burs, superfine diamond burs, and carbide burs. The pulp chamber of each crown segment was connected to a dynamic intra-pulpal pressure simulation apparatus, and the permeability test was done under a pressure of 15 cmH₂O. The relative permeability (%P) was evaluated on the smear layer-covered and bonded dentin surfaces. The teeth were bonded to either of the adhesives under pulpal pressure simulation, and cut into sticks after 24 hours water storage for the µTBS test. The resin-dentin interface and nanoleakage observations were performed using a scanning electron microscope. Statistical comparisons were done using analysis of variance and post hoc tests.

Results

Only the method of surface preparation had a significant effect on permeability (p < 0.05). The smear layers created by the carbide and superfine diamond burs yielded the lowest permeability. CSE demonstrated a higher µTBS, with these values in the superfine diamond and carbide bur groups being the highest. Microscopic evaluation of the resin-dentin interface revealed nanoleakage in the coarse diamond bur and SiC paper groups for both adhesives.

Conclusions

Superfine diamond and carbide burs can be recommended for dentin preparation with the use of 2-step CSE.

Beneficial use of animal hides for abattoir and tannery waste management: a review of unconventional, innovative, and sustainable approaches

The art of using animal hides, an apparent waste from the meat processing industry, goes back to the dawn of humanity and was highly demanded for leather manufacturing. In Ontario (Canada), small- and medium-sized abattoirs process all together approximately 300,000 sheep and 100,000 cattle per year, and for decades, the collected hides and skins have been processed into leather. However, there has been a decline in the price as well as in the demand for animal hides in the last few years, mainly due to increased customer interest in synthetic materials. This has significantly impacted small- and medium-scale abattoirs as they are left with no other option but to landfill these hides, which is not a sustainable approach. This review discusses the alternative approaches available for the management of animal hides, including those also suitable for tannery residues, which can economically and environmentally benefit society. These benefits include the production or generation of energy, compost, yarn, and medicinal goods, among other beneficial uses.

Exploring the Cell Stemness and the Complexity of the Adipose Tissue Niche

Adipose tissue is a complex organ composed of different cellular populations, including mesenchymal stem and progenitor cells, adipocytes, and immune cells such as macrophages and lymphocytes. These cellular populations alter dynamically during aging or as a response to pathophysiology such as obesity. Changes in the various inflammatory cells are associated with metabolic complications and the development of insulin resistance, indicating that immune cells crosstalk with the adipocytes. Therefore, a study of the cell populations in the adipose tissue and the extracellular matrix maintaining the tissue niche is important for the knowledge on the regulatory state of the organ. We used a combination of methods to study various parameters to identify the composition of the resident cells in the adipose tissue and evaluate their profile. We analyzed the tissue structure and cells based on histology, immune fluorescence staining, and flow cytometry of cells present in the tissue in vivo and these markers’ expression in vitro. Any shift in cells’ composition influences self-renewal of the mesenchymal progenitors, and other cells affect the functionality of adipogenesis.

Analysis and simulation of fracture behavior in naturally occurring Bouligand structures

Through natural selection processes, refined biological materials could be created that adapt to various environments and exhibit specific functions. Such materials include typical Bouligand structures that can be widely observed in marine creatures that have hard shells. Consisting of a helicoidal arrangement of aligned fibrils, layered single-twisted Bouligand-type structures (SBS) display exceptional fracture and damage resistance. A much more primitive and rarer type of this formation, the double-twisted Bouligand-type structures (DBS), has been discovered in ancient fish scales, and this architecture could provide added rigidity and significantly contribute to toughness when facing fracture risk. In this work, we describe a computational modeling approach to investigating fracture behaviors and toughening mechanisms in Bouligand structures. To achieve qualitative insights into the fracture behaviors of DBS and SBS, we applied these two configurations, which were identified from corresponding biological materials, to analyze load-displacement responses during single edge notched (SEN) tensile testing; the toughening mechanism is also discussed further. The results clearly show that the arrangement of helix fibrils and interlaminar properties play a major role in the resulting fracture behaviors of Bouligand architectures. This is of interest for the future design of engineering materials and structures that require composites with enhanced toughness, and could deepen our understanding of the structure-property relationship of Bouligand-type structures in bionic design. STATEMENT OF SIGNIFICANCE: In this work, a novel numerical modeling approach based on the extended finite element method (XFEM) has been established to evaluate the fracture behavior of a naturally-occurring Bouligand-type helicoidal structure subjected to the single edge notched (SEN) tensile loading. The roles of the biological features (i.e., layered arrangement of collagen fibrils and interbundle fibrils) on the fracture resistance and toughening mechanism of the Bouligand-type structures have been uncovered and analyzed quantitatively. This is of interest for future design of engineering materials and structures that require composites with enhanced toughness, and can deepen the understanding of the structure-property relationship of the Bouligand-type structure in bionic design.

Effect of organic matrix alteration on strain rate dependent mechanical behaviour of cortical bone

The organic matrix phase of bone plays important role in its mechanical performance, especially in the post-yield regime. Also, the organic phase influences loading rate-dependent behaviour of bone which is relevant during the high-speed loading events. Many diseases, as well as aging, affect the matrix phase of bone which causes compromised mechanical properties. Improved understanding of alterations in the organic matrix phase on mechanical response of bone will be helpful in the mitigation of fractures associated with inferior matrix quality. In the present work, effect of alteration in organic matrix of cortical bone on its strain-rate dependent behaviour was investigated. To produce different amounts of collagen denaturation, bovine cortical bones were heated at the temperature of 180 °C and 240 °C. Further, compression testing was performed at quasi-static strain rates of 10^-4 s^-1 to 10^-2 s^-1 using a conventional testing machine whereas a modified Split Hopkinson Pressure Bar (SHPB) was used for high strain rate (∼10³) testing. Thermal treatment-induced changes in the mineral and organic phases of bone were assessed using X-ray diffraction (XRD) and Fourier-transform infrared-attenuated total reflection (FTIR-ATR) techniques respectively. Compression test results show that thermal treatment of bone up to 180 °C did not affect mechanical properties significantly whereas treating at 240 °C significantly reduced elastic modulus, failure stress and failure strain. Also, thermal denaturation of collagen reduced the strain rate sensitivity of cortical bone at high strain rates. Similar to the compression test observations, nanoindentation results show a significant reduction in elastic modulus and hardness of denatured samples. Further, FTIR results revealed that with the heat treatment of bone, collagen structure undergoes conformational changes at the molecular level. The initial helix structure breakdowns into unordered/random coil structures which subsequently reduced the mechanical competence of bone. The present study provides insight into the effect of organic matrix modification on mechanical behaviour of cortical bone which could be helpful in understanding bone disorders associated with organic matrix phase and development of therapeutic interventions.

Collagen-based formulations for wound healing: A literature review

Wounds have always been the point of concern owing to the involvement of infections and the level of severity. Therefore, the management of wounds always requires additional effort for comprehensive healing and subsequent removal of the scar from the wound site. The role of biomaterials in the management of chronic wounds has been well established. One of such biomaterials is collagen (Col) that is considered to be the crucial component of most of the formulations being developed for wound healing. The role of Col extracted from marine invertebrates remains an unmarked origin of the proteinaceous constituent in the evolution of innovative pharmaceuticals. Col is a promising, immiscible, fibrous amino acid of indigenous origin that is ubiquitously present in extracellular matrices and connective tissues. There are different types of Col present in the body such as type I, II, III, IV, and V however the natural sources of Col are vegetables and marine animals. Its physical properties like high tensile strength, adherence nature, elasticity, and remodeling contribute significantly in the wound healing process. Col containing formulations such as hydrogels, sponges, creams, peptides, and composite nanofibers have been utilized widely in wound healing and tissue engineering purposes truly as the first line of defense. Here we present the recent advancements in Col based dosage forms for wound healing. The Col based market of topical preparations and the published reports identify Colas a useful biomaterial for the delivery of pharmaceuticals and a platform for tissue engineering.

Decellularized pericardium tissues at increasing glucose, galactose and ribose concentrations and at different time points studied using scanning X-ray microscopy

Diseases like widespread diabetes or rare galactosemia may lead to high sugar concentrations in the human body, thereby promoting the formation of glycoconjugates. Glycation of collagen, i.e. the formation of glucose bridges, is nonenzymatic and therefore cannot be prevented in any other way than keeping the sugar level low. It relates to secondary diseases, abundantly occurring in aging populations and diabetics. However, little is known about the effects of glycation of collagen on the molecular level. We studied in vitro the effect of glycation, with d-glucose and d-galactose as well as d-ribose, on the structure of type 1 collagen by preparing decellularized matrices of bovine pericardia soaked in different sugar solutions, at increasing concentrations (0, 2.5, 5, 10, 20 and 40 mg ml-1), and incubated at 37°C for 3, 14, 30 and 90 days. The tissue samples were analyzed with small- and wide-angle X-ray scattering in scanning mode. We found that glucose and galactose produce similar changes in collagen, i.e. they mainly affect the lateral packing between macromolecules. However, ribose is much faster in glycation, provoking a larger effect on the lateral packing, but also seems to cause qualitatively different effects on the collagen structure.

Incorporation of gelatin improves toughness of collagen films with a homo-hierarchical structure

In this study, gelatin (type A and type B) with/without transglutaminase (TGase) were added to collagen fiber films to form hierarchical structure and its effects on the film were investigated. The analysis of mechanical properties indicate that gelatin significantly increased the toughness of the collagen film, where the 10 wt% type A gelatin -contained films had highest tensile strength, elongation at break and work of fracture. However, TGase crosslinking compromised the benefits of type A gelatin greatly, while type B gelatin showed a slight improvement, due to the difference in crosslinking activity between them. In the meantime, the hydrogen bonds were formed between the collagen and gelatin according to the results of the Fourier transformation infrared. In general, it is expected that the hierarchical structure formed in the collagen/gelatin films can be used as an effective strategy to enhance the collagen matrix films' mechanical properties.

Applications of nanomaterials in tissue engineering

Recent advancement in nanotechnology has brought prominent benefits in tissue engineering, which has been used to repair or reconstruct damaged tissues or organs and design smart drug delivery systems. With numerous applications of nanomaterials in tissue engineering, it is vital to choose appropriate nanomaterials for different tissue engineering applications because of the tissue heterogeneity. Indeed, the use of nanomaterials in tissue engineering is directly determined by the choice. In this review, we mainly introduced the use of nanomaterials in tissue engineering. First, the basic characteristics, preparation and characterization methods of the types of nanomaterials are introduced briefly, followed by a detailed description of the application and research progress of nanomaterials in tissue engineering and drug delivery. Finally, the existing challenges and prospects for future applications of nanomaterials in tissue engineering are discussed.

Chiral phase-coexistence in compressed double-twist elastomers

We adapt the theory of anisotropic rubber elasticity to model cross-linked double-twist liquid crystal cylinders such as exhibited in biological systems. In mechanical extension we recover strain-straightening, but with an exact expression in the small twist-angle limit. In compression, we observe coexistence between high and low twist phases. Coexistence begins at small compressive strains and is robustly observed for any anisotropic cross-links and for general double-twist functions - but disappears at large twist angles. Within the coexistence region, significant compression of double-twist cylinders is allowed at constant stress. Our results are qualitatively consistent with previous observations of swollen or compressed collagen fibrils, indicating that this phenomenon may be readily accessible experimentally.

Bioinspired energy absorbing material designs using additive manufacturing

Nature provides many biological materials and structures with exceptional energy absorption capabilities. Few, relatively simple molecular building blocks (e.g., calcium carbonate), which have unremarkable intrinsic mechanical properties individually, are used to produce biopolymer-bioceramic composites with unique hierarchical architectures, thus producing biomaterial-architectures with extraordinary mechanical properties. Several biomaterials have inspired the design and manufacture of novel material architectures to address various engineering problems requiring high energy absorption capabilities. For example, the microarchitecture of seashell nacre has inspired multi-material 3D printed architectures that outperform the energy absorption capabilities of monolithic materials. Using the hierarchical architectural features of biological materials, iterative design approaches using simulation and experimentation are advancing the field of bioinspired material design. However, bioinspired architectures are still challenging to manufacture because of the size scale and architectural hierarchical complexity. Notwithstanding, additive manufacturing technologies are advancing rapidly, continually providing researchers improved abilities to fabricate sophisticated bioinspired, hierarchical designs using multiple materials. This review describes the use of additive manufacturing for producing innovative synthetic materials specifically for energy absorption applications inspired by nacre, conch shell, shrimp shell, horns, hooves, and beetle wings. Potential applications include athletic prosthetics, protective head gear, and automobile crush zones.

Harnessing the ECM Microenvironment to Ameliorate Mesenchymal Stromal Cell-Based Therapy in Chronic Lung Diseases

It is known that the cell environment such as biomechanical properties and extracellular matrix (ECM) composition dictate cell behaviour including migration, proliferation, and differentiation. Important constituents of the microenvironment, including ECM molecules such as proteoglycans and glycosaminoglycans (GAGs), determine events in both embryogenesis and repair of the adult lung. Mesenchymal stromal/stem cells (MSC) have been shown to have immunomodulatory properties and may be potent actors regulating tissue remodelling and regenerative cell responses upon lung injury. Using MSC in cell-based therapy holds promise for treatment of chronic lung diseases such as idiopathic pulmonary fibrosis (IPF) and chronic obstructive pulmonary disease (COPD). However, so far clinical trials with MSCs in COPD have not had a significant impact on disease amelioration nor on IPF, where low cell survival rate and pulmonary retention time are major hurdles to overcome. Research shows that the microenvironment has a profound impact on transplanted MSCs. In our studies on acellular lung tissue slices (lung scaffolds) from IPF patients versus healthy individuals, we see a profound effect on cellular activity, where healthy cells cultured in diseased lung scaffolds adapt and produce proteins further promoting a diseased environment, whereas cells on healthy scaffolds sustain a healthy proteomic profile. Therefore, modulating the environmental context for cell-based therapy may be a potent way to improve treatment using MSCs. In this review, we will describe the importance of the microenvironment for cell-based therapy in chronic lung diseases, how MSC-ECM interactions can affect therapeutic output and describe current progress in the field of cell-based therapy.

Nano-Scale Stiffness and Collagen Fibril Deterioration: Probing the Cornea Following Enzymatic Degradation Using Peakforce-QNM AFM

Under physiological conditions, the cornea is exposed to various enzymes, some of them have digestive actions, such as amylase and collagenase that may change the ultrastructure (collagen morphology) and sequentially change the mechanical response of the cornea and distort vision, such as in keratoconus. This study investigates the ultrastructure and nanomechanical properties of porcine cornea following incubation with α-amylase and collagenase. Atomic force microscopy (AFM) was used to capture nanoscale topographical details of stromal collagen fibrils (diameter and D-periodicity) and calculate their elastic modulus. Samples were incubated with varying concentrations of α-amylase and collagenase (crude and purified). Dimethylmethylene blue (DMMB) assay was utilised to detect depleted glycosaminoglycans (GAGs) following incubation with amylase. Collagen fibril diameters were decreased following incubation with amylase, but not D-periodicity. Elastic modulus was gradually decreased with enzyme concentration in amylase-treated samples. Elastic modulus, diameter, and D-periodicity were greatly reduced in collagenase-treated samples. The effect of crude collagenase on corneal samples was more pronounced than purified collagenase. Amylase was found to deplete GAGs from the samples. This enzymatic treatment may help in answering some questions related to keratoconus, and possibly be used to build an empirical animal model of keratoconic corneas with different progression levels.

Non-equilibrium growth and twist of cross-linked collagen fibrils

The lysyl oxidase (LOX) enzyme that catalyses cross-link formation during the assembly of collagen fibrils in vivo is too large to diffuse within assembled fibrils, and so is incompatible with a fully equilibrium mechanism for fibril formation. We propose that enzymatic cross-links are formed at the fibril surface during the growth of collagen fibrils; as a consequence no significant reorientation of previously cross-linked collagen molecules occurs inside collagen fibrils during fibril growth in vivo. By imposing local equilibrium only at the fibril surface, we develop a coarse-grained quantitative model of in vivo fibril structure that incorporates a double-twist orientation of collagen molecules and a periodic D-band density modulation along the fibril axis. Radial growth is controlled by the concentration of available collagen molecules outside the fibril. In contrast with earlier equilibrium models of fibril structure, we find that all fibrils can exhibit a core-shell structure that is controlled only by the fibril radius. At small radii a core is developed with a linear double-twist structure as a function of radius. Within the core the double-twist structure is largely independent of the D-band. Within the shell at larger radii, the structure approaches a constant twist configuration that is strongly coupled with the D-band. We suggest a stable radius control mechanism that corneal fibrils can exploit near the edge of the linear core regime; while larger tendon fibrils use a cruder version of growth control that does not select a preferred radius.

Deformation resilient cement structures using 3D-printed molds

Cementitious structures exhibit high compression strength but suffer from inherent brittleness. Conversely, nature creates structures using mostly brittle phases that overcome the strength-toughness trade-off, mainly through internalized packaging of brittle phases with soft organic binders. Here, we develop complex architectures of cementitious materials using an inverse replica approach where a soft polymer phase emerges as an external conformal coating. Architected polymer templates are printed, cement pastes are molded into these templates, and cementitious structures with thin polymer surface coating are achieved after the solubilization of sacrificial templates. These polymer-coated architected cementitious structures display unusual mechanical behavior with considerably higher toughness compared to conventional non-porous structures. They resist catastrophic failure through delayed damage propagation. Most interestingly, the architected structures show significant deformation recovery after releasing quasi-static loading, atypical in conventional cementitious structures. This approach allows a simple strategy to build more deformation resilient cementitious structures than their traditional counterparts.

•

A polymer-coated architected cementitious structure is developed

•

Catastrophic failure is prevented through delayed damage propagation mechanisms

•

Significant structural recovery is observed after releasing compression loading

Multiple Pathways for Pathological Calcification in the Human Body

Biomineralization of skeletal components (e.g., bone and teeth) is generally accepted to occur under strict cellular regulation, leading to mineral-organic composites with hierarchical structures and properties optimized for their designated function. Such cellular regulation includes promoting mineralization at desired sites as well as inhibiting mineralization in soft tissues and other undesirable locations. In contrast, pathological mineralization, with potentially harmful health effects, can occur as a result of tissue or metabolic abnormalities, disease, or implantation of certain biomaterials. This progress report defines mineralization pathway components and identifies the commonalities (and differences) between physiological (e.g., bone remodeling) and pathological calcification formation pathways, based, in part, upon the extent of cellular control within the system. These concepts are discussed in representative examples of calcium phosphate-based pathological mineralization in cancer (breast, thyroid, ovarian, and meningioma) and in cardiovascular disease. In-depth mechanistic understanding of pathological mineralization requires utilizing state-of-the-art materials science imaging and characterization techniques, focusing not only on the final deposits, but also on the earlier stages of crystal nucleation, growth, and aggregation. Such mechanistic understanding will further enable the use of pathological calcifications in diagnosis and prognosis, as well as possibly provide insights into preventative treatments for detrimental mineralization in disease.

Targeting Lysyl Oxidase Family Meditated Matrix Cross-Linking as an Anti-Stromal Therapy in Solid Tumours

Simple Summary

To improve efficacy of solid cancer treatment, efforts have shifted towards targeting both the cancer cells and the surrounding tumour tissue they grow in. The lysyl oxidase (LOX) family of enzymes underpin the fibrotic remodeling of the tumour microenvironment to promote both cancer growth, spread throughout the body and modulate response to therapies. This review examines how the lysyl oxidase family is involved in tumour development, how they can be targeted, and their potential as diagnostic and prognostic biomarkers in solid tumours.

Abstract

The lysyl oxidase (LOX) family of enzymes are a major driver in the biogenesis of desmoplastic matrix at the primary tumour and secondary metastatic sites. With the increasing interest in and development of anti-stromal therapies aimed at improving clinical outcomes of cancer patients, the Lox family has emerged as a potentially powerful clinical target. This review examines how lysyl oxidase family dysregulation in solid cancers contributes to disease progression and poor patient outcomes, as well as an evaluation of the preclinical landscape of LOX family targeting therapeutics. We also discuss the suitability of the LOX family as a diagnostic and/or prognostic marker in solid tumours.

Enhanced Osteogenic Differentiation of Human Bone Marrow-Derived Mesenchymal Stem Cells by a Hybrid Hydroxylapatite/Collagen Scaffold

Human bone marrow-derived mesenchymal stem cells (hBMSCs) and their derivative enhanced green fluorescent protein (eGFP)-hBMSCs were employed to evaluate an innovative hybrid scaffold composed of granular hydroxylapatite and collagen hemostat (Coll/HA). The cellular morphology/cytoskeleton organization and cell viability were investigated by immunohistochemistry (IHC) and AlamarBlue metabolic assay, respectively. The expression of osteopontin and osteocalcin proteins was analyzed by IHC and ELISA, whereas osteogenic genes were investigated by quantitative PCR (Q-PCR). Cell morphology of eGFP-hBMSCs was indistinguishable from that of parental hBMSCs. The cytoskeleton architecture of hBMSCs grown on the scaffold appeared to be well organized, whereas its integrity remained uninfluenced by the scaffold during the time course. Metabolic activity measured in hBMSCs grown on a biomaterial was increased during the experiments, up to day 21 (p < 0.05). The biomaterial induced the matrix mineralization in hBMSCs. The scaffold favored the expression of osteogenic proteins, such as osteocalcin and osteopontin. In hBMSC cultures, the scaffold induced up-regulation in specific genes that are involved in ossification process (BMP2/3, SPP1, SMAD3, and SP7), whereas they showed an up-regulation of MMP9 and MMP10, which play a central role during the skeletal development. hBMSCs were induced to chondrogenic differentiation through up-regulation of COL2A1 gene. Our experiments suggest that the innovative scaffold tested herein provides a good microenvironment for hBMSC adhesion, viability, and osteoinduction. hBMSCs are an excellent in vitro cellular model to assay scaffolds, which can be employed for bone repair and bone tissue engineering.

Collagen Mimetic Peptides

Since their first synthesis in the late 1960s, collagen mimetic peptides (CMPs) have been used as a molecular tool to study collagen, and as an approach to develop novel collagen mimetic biomaterials. Collagen, a major extracellular matrix (ECM) protein, plays vital roles in many physiological and pathogenic processes. Applications of CMPs have advanced our understanding of the structure and molecular properties of a collagen triple helix-the building block of collagen-and the interactions of collagen with important molecular ligands. The accumulating knowledge is also paving the way for developing novel CMPs for biomedical applications. Indeed, for the past 50 years, CMP research has been a fast-growing, far-reaching interdisciplinary field. The major development and achievement of CMPs were documented in a few detailed reviews around 2010. Here, we provided a brief overview of what we have learned about CMPs-their potential and their limitations. We focused on more recent developments in producing heterotrimeric CMPs, and CMPs that can form collagen-like higher order molecular assemblies. We also expanded the traditional view of CMPs to include larger designed peptides produced using recombinant systems. Studies using recombinant peptides have provided new insights on collagens and promoted progress in the development of collagen mimetic fibrillar self-assemblies.

The Physical Role of Mesenchymal Cells Driven by the Actin Cytoskeleton Is Essential for the Orientation of Collagen Fibrils in Zebrafish Fins

Fibrous collagen imparts physical strength and flexibility to tissues by forming huge complexes. The density and orientation of collagen fibers must be correctly specified for the optimal physical property of the collagen complex. However, little is known about its underlying cellular mechanisms. Actinotrichia are collagen fibers aligned at the fin-tip of bony fish and are easily visible under the microscope due to their thick, linear structure. We used the actinotrichia as a model system to investigate how cells manipulate collagen fibers. The 3D image obtained by focused ion beam scanning electron microscopy (FIB-SEM) showed that the pseudopodia of mesenchymal cells encircle the multiple actinotrichia. We then co-incubated the mesenchymal cells and actinotrichia in vitro, and time-lapse analysis revealed how cells use pseudopods to align collagen fiber orientation. This in vitro behavior is dependent on actin polymerization in mesenchymal cells. Inhibition of actin polymerization in mesenchymal cells results in mis-orientation of actinotrichia in the fin. These results reveal how mesenchymal cells are involved in fin formation and have important implications for the physical interaction between cells and collagen fibers.

Natural arrangement of fiber-like aragonites and its impact on mechanical behavior of mollusk shells: A review

During billions of years of evolution, creatures in nature have possessed nearly perfect structures and functions for survival. Multiscale structures in biological materials over several length scales play a pivotal role in achieving structural and functional integrity. Fiber, as a common principal structural element in nature, can be easily constructed in different ways, thus resulting in various natural structures. In this review, we summarized the decades of investigations on a typical biological structure constructed by fiber aragonites in mollusk shells. Crossed-lamellar structure, as one of the most widespread structures in mollusk shells, reconciles the strength-toughness trade-off dilemma successfully due to the presence of highly-hierarchical architectures. This distinctive structure includes several orders of sub-lamellae, and the different order lamellae present a cross-ply feature in one macro crossed-lamellar layer. When a mollusk shell has more than one macro-layer, the crossed-lamellar structure exhibits various forms of architectures including 0°/90°, 0°/90°/0° typical-sandwich, 15°/75°/0° quasi-sandwich, and 0°/90°/0°/90° arranged modes. The fracture resistance and the relevant toughening mechanisms are directly related to the highly-hierarchical crossed-lamellar structures on different length scales. This article is aimed to review the different arranged modes of crossed-lamellar structures existing in nature, with special attention to their impact on the mechanical behavior and salient toughening mechanisms over several length scales, for seeking the design guidelines for the fabrication of bio-inspired advanced engineering materials that are adaptive to different loading conditions.

Sea Cucumber Derived Type I Collagen: A Comprehensive Review

Collagen is the major fibrillar protein in most living organisms. Among the different types of collagen, type I collagen is the most abundant one in tissues of marine invertebrates. Due to the health-related risk factors and religious constraints, use of mammalian derived collagen has been limited. This triggers the search for alternative sources of collagen for both food and non-food applications. In this regard, numerous studies have been conducted on maximizing the utilization of seafood processing by-products and address the need for collagen. However, less attention has been given to marine invertebrates and their by-products. The present review has focused on identifying sea cucumber as a potential source of collagen and discusses the general scope of collagen extraction, isolation, characterization, and physicochemical properties along with opportunities and challenges for utilizing marine-derived collagen.

Dry vs. wet: Properties and performance of collagen films. Part I. Mechanical behaviour and strain-rate effect

Collagen forms one-third of the body proteome and has emerged as an important biomaterial for tissue engineering and wound healing. Collagen films are used in tissue regeneration, wound treatment, dural substitute etc. as well as in flexible electronics. Thus, the mechanical behaviour of collagen should be studied under different environmental conditions and strain rates relevant for potential applications. This study's aim is to assess the mechanical behaviour of collagen films under different environmental conditions (hydration, submersion and physiological temperature (37 °C)) and strain rates. The combination of all three environment factors (hydration, submersion and physiological temperature (37 °C)) resulted in a drop of tensile strength of the collagen film by some 90% compared to that of dry samples, while the strain at failure increased to about 145%. For the first time, collagen films were subjected to different strain rates ranging from quasi-static (0.0001 s^-1) to intermediate (0.001 s^-1, 0.01 s^-1) to dynamic (0.1 s^-1, 1 s^-1) conditions, with the strain-rate-sensitivity exponent (m) reported. It was found that collagen exhibited a strain-rate-sensitive hardening behaviour with increasing strain rate. The exponent m ranged from 0.02-0.2, with a tendency to approach zero at intermediate strain rate (0.01 s^-1), indicating that collagen may be strain-rate insensitive in this regime. From the identification of hyperelastic parameter of collagen film, it was found that the Ogden Model provides realistic results for future simulations.

Comparative Study on Protein-Rich Electrospun Fibers for in Vitro Applications

Electrospinning is the leading technology to fabricate fibrous scaffolds that mimic the architecture of the extracellular matrix of natural tissues. In order to improve the biological response, a consolidated trend involves the blending of synthetic polymers with natural proteins to form protein-rich fibers that include selected biochemical cues able to more actively support in vitro cell interaction. In this study, we compared protein-rich fibers fabricated via electrospinning by the blending of poly ε-caprolactone (PCL) with three different proteins, i.e., gelatin, zein, and keratin, respectively. We demonstrated that the peculiar features of the proteins used significantly influence the morphological properties, in terms of fiber size and distribution. Moreover, keratin drastically enhances the fiber hydrophilicity (water contact angle equal to 44.3° ± 3.9°) with positive effects on cell interaction, as confirmed by the higher proliferation of human mesenchymal stem cells (hMSC) until 7 days. By contrast, gelatin and zein not equally contribute to the fiber wettability (water contact angles equal to 95.2° ± 1.2° and 76.3° ± 4.0°, respectively) due to morphological constraints, i.e., broader fiber diameter distribution ascribable to the non-homogeneous presence of the protein along the fibers, or chemical constrains, i.e., large amount of non-polar amino acids. According to in vitro experimental studies, which included SEM and confocal microscopy analyses and vitality assay, we concluded that keratin is the most promising protein to be combined with PCL for the fabrication of biologically instructive fibers for in vitro applications.

Nanomechanical 3D Depth Profiling of Collagen Fibrils in Native Tendon

Connective tissue displays a large compositional and structural complexity that involves multiple length scales. In particular, on the molecular and the nanometer level, the elementary processes that determine the biomechanics of collagen fibrils in connective tissues are still poorly understood. Here, we use atomic force microscopy (AFM) to determine the three-dimensional (3D) depth profiles of the local nanomechanical properties of collagen fibrils and their embedding interfibrillar matrix in native (unfixed), hydrated Achilles tendon of sheep and chickens. AFM imaging in air with controlled humidity preserves the tissue's water content, allowing the assembly of collagen fibrils to be imaged in high resolution beneath an approximately 5-10 nm thick layer of the fluid components of the interfibrillar matrix. We collect pointwise force-distance (FD) data and amplitude-phase-distance (APD) data, from which we construct 3D depth profiles of the local tip-sample interaction forces. The 3D images reveal the nanomechanical morphology of unfixed, hydrated collagen fibrils in native tendon with a 0.1 nm depth resolution and a 10 nm lateral resolution. We observe a diversity in the nanomechanical properties among individual collagen fibrils in their adhesive and in their repulsive, viscoelastic mechanical response as well as among the contact points between adjacent collagen fibrils. This sheds new light on the role of interfibrillar bonds and the mechanical properties of the interfibrillar matrix in the biomechanics of tendon.

Hidrogeles de colágeno acoplados con hidroxiapatita para aplicaciones en ingeniería tisular

Los hidrogeles basados en colágeno son redes tridimensionales (3D) con la capacidad de absorber agua y una alta biocompatibilidad para utilizarlos en la reparación de tejidos dañados. Estos materiales presentan pobres propiedades mecánicas y velocidades de degradación rápidas, limitando su aplicación a estrategias de ingeniería tisular y biomedicina; por ésto, la incorporación de fases inorgánicas en la matriz 3D del colágeno como la hidroxiapatita ha contribuido en la mejora de sus propiedades, incrementado la eficiencia de los hidrogeles híbridos obtenidos. Este trabajo, presenta las contribuciones más relevantes relacionadas con los sistemas de hidrogeles basados en colágeno y partículas de hidroxiapatita dispersas dentro de la matriz colagénica, lo que evidencia que la combinación de los materiales no altera la biocompatibilidad y biodegradabilidad típicas del colágeno, permitiendo la adhesión, proliferación, crecimiento celular y control del metabolismo de las células implicadas en los procesos de una reparación ósea, presentando a los hidrogeles como una estrategia para su uso potencial en la ingeniería tisular.

Northern Sea Cucumber (Cucumaria frondosa): A Potential Candidate for Functional Food, Nutraceutical, and Pharmaceutical Sector

Sea cucumber (Cucumaria frondosa) is the most abundant and widely distributed species in the cold waters of North Atlantic Ocean. C. frondosa contains a wide range of bioactive compounds, mainly collagen, cerebrosides, glycosaminoglycan, chondroitin sulfate, saponins, phenols, and mucopolysaccharides, which demonstrate unique biological and pharmacological properties. In particular, the body wall of this marine invertebrate is the major edible part and contains most of the active constituents, mainly polysaccharides and collagen, which exhibit numerous biological activities, including anticancer, anti-hypertensive, anti-angiogenic, anti-inflammatory, antidiabetic, anti-coagulation, antimicrobial, antioxidation, and anti- osteoclastogenic properties. In particular, triterpene glycosides (frondoside A and other) are the most researched group of compounds due to their potential anticancer activity. This review summarizes the latest information on C. frondosa, mainly geographical distribution, landings specific to Canadian coastlines, processing, commercial products, trade market, bioactive compounds, and potential health benefits in the context of functional foods and nutraceuticals.

The predominant roles of the sequence periodicity in the self-assembly of collagen-mimetic mini-fibrils

Collagen fibrils represent a unique case of protein folding and self‐association. We have recently successfully developed triple‐helical peptides that can further self‐assemble into collagen‐mimetic mini‐fibrils. The 35 nm axially repeating structure of the mini‐fibrils, which is designated the d‐period, is highly reminiscent of the well‐known 67 nm D‐period of native collagens when examined using TEM and atomic force spectroscopy. We postulate that it is the pseudo‐identical repeating sequence units in the primary structure of the designed peptides that give rise to the d‐period of the quaternary structure of the mini‐fibrils. In this work, we characterize the self‐assembly of two additional designed peptides: peptide Col877 and peptide Col108rr. The triple‐helix domain of Col877 consists of three pseudo‐identical amino acid sequence units arranged in tandem, whereas that of Col108rr consists of three sequence units identical in amino acid composition but different in sequence. Both peptides form stable collagen triple helices, but only triple helices Col877 self‐associate laterally under fibril forming conditions to form mini‐fibrils having the predicted d‐period. The Co108rr triple helices, however, only form nonspecific aggregates having no identifiable structural features. These results further accentuate the critical involvement of the repeating sequence units in the self‐assembly of collagen mini‐fibrils; the actual amino acid sequence of each unit has only secondary effects. Collagen is essential for tissue development and function. This novel approach to creating collagen‐mimetic fibrils can potentially impact fundamental research and have a wide range of biomedical and industrial applications.

Constitutive description of skin dermis: Through analytical continuum and coarse-grained approaches for multi-scale understanding

Although there are many successful descriptions of the mechanical response of dermis at different levels of complexity and incorporating varying degrees of the physical phenomena involved in deformation, observations indicate that the unraveling of fibers involves a complex three-dimensional process in which they interact in ways that resemble a braided pattern. Here we develop two complementary treatments to gain a better understanding of the mechanical response of dermis: a) an analytical treatment incorporating fibril stiffness, interfibrillar frictional sliding, and the effect of lateral fibers on the extension of a primary fiber; b) a coarse-grained molecular dynamics model comprised of an array of parallel curved fibrils simulating a fiber. Interfibrillar frictional sliding and stiffness are also captured. Both analytical and molecular dynamics models operate at a scale compatible with the wavelength of collagen fibers (~10 µm). The constitutive description presented here incorporates important physical processes taking place during deformation of dermis and thus represents an advance in our understanding of these phenomena. STATEMENT OF SIGNIFICANCE: Microstructural observations of the dermis of skin during tensile deformation indicate that the unraveling of fibers involves a complex three-dimensional process which replicates the effects of braiding. Two complementary constitutive modeling treatments were developed to gain a better understanding of the mechanical response of dermis: an analytical treatment incorporating fibril stiffness, interfibrillar sliding, and the effect of transverse fibers; and a coarse-grained molecular dynamics model describing the fibril bundling effect. An important novel aspect of the current contribution is the recognition that tridimensional collagen fiber arrangements play an important role in the mechanical response. The constitutive description presented here incorporates physical processes taking place during deformation of the dermis and thus represents an advance in our understanding of these phenomena.

A top-down approach to improve collagen film's performance: The comparisons of macro, micro and nano sized fibers

The severe reduction of mechanical strength of collagen once it is extracted or dissociated from animal tissues and no additional crosslinking approaches are conducted, impede its application in biodegradable and edible food packaging. Here, for the first time, high pressure homogenization (HPH) was used to prepare diverse sized fibers and the related fibers-composed films' performance were investigated. These fibers have a diversity of effects on film performance. The films prepared with smaller sized fibers had a more uniform and denser structure. The mechanical and the water barrier properties of the films improved significantly as the fiber size decreased. No obvious change in FTIR and thermal properties suggests that the improved film performance is mainly attributed to the physical entanglement and non-covalent bonds. Given the forementioned benefits of the films, control of fiber size can be a potential industrial approach for producing collagenous materials in edible food packaging.

Single particles as resonators for thermomechanical analysis

Thermal methods are indispensable for the characterization of most materials. However, the existing methods require bulk amounts for analysis and give an averaged response of a material. This can be especially challenging in a biomedical setting, where only very limited amounts of material are initially available. Nano- and microelectromechanical systems (NEMS/MEMS) offer the possibility of conducting thermal analysis on small amounts of materials in the nano-microgram range, but cleanroom fabricated resonators are required. Here, we report the use of single drug and collagen particles as micro mechanical resonators, thereby eliminating the need for cleanroom fabrication. Furthermore, the proposed method reveals additional thermal transitions that are undetected by standard thermal methods and provide the possibility of understanding fundamental changes in the mechanical properties of the materials during thermal cycling. This method is applicable to a variety of different materials and opens the door to fundamental mechanistic insights.