Pervaporation performance comparison of hybrid membranes filled with two-dimensional ZIF-L nanosheets and zero-dimensional ZIF-8 nanoparticles

A novel water-stable two-dimensional zeolitic imidazolate frameworks thin-film composite membrane for enhancements in water permeability and nanofiltration performance

Polymer membranes for water treatment are constrained by the permeability-separation trade-off. Herein, two-dimensional (2D) zeolitic imidazolate frameworks (ZIFs) made of benzimidazole interconnected with Zn ions are used to create 2D Zn₂(Bim)₄ molecular sieve nanosheets, which is explored as an asymmetric, thin-film composite (TFC) nanofiltration (NF) membrane for removing organic dyes and salts from water with a high water permeability under a low operating pressure (1 bar). The 2D Zn₂(Bim)₄ TFC NF membrane is synthesized via ionic bonds between polycations and the peripheral hydroxy groups of 2D Zn₂(Bim)₄ nanosheets, regulating the assembly of 2D Zn₂(Bim)₄ to create a novel crack-free functional layer on top of a polyvinylidene fluoride (PVDF) ultrafiltration membrane. FESEM and XPS confirmed the presence of a polycations-regulated ultrathin functional layer with a thickness of ∼37 nm on the PVDF support. Benefiting from its structural feature, our 2D Zn₂(Bim)₄ TFC NF membrane could achieve an ultra-high flux of ∼290 L/(m²·h·bar) (5-10-fold higher than that of graphene-based membranes), good anti-fouling properties and high rejection rates (above 98%) for organic dyes. Moreover, the desalinization rate is 50-75%. That is, our membrane is endowed with NF capability, and its intrinsic ultrafiltration features (high water permeance, ultrafast, and energy-saving) are also well maintained.

Beam-sensitive metal-organic framework structure determination by microcrystal electron diffraction

Analysis of metal-organic framework (MOF) structure by electron microscopy and electron diffraction offers an alternative to growing large single crystals for high-resolution X-ray diffraction. However, many MOFs are electron beam-sensitive, which can make structural analysis using high-resolution electron microscopy difficult. In this work we use the microcrystal electron diffraction (MicroED) method to collect high-resolution electron diffraction data from a model beam-sensitive MOF, ZIF-8. The diffraction data could be used to determine the structure of ZIF-8 to 0.87 Å from a single ZIF-8 nanocrystal, and this refined structure compares well with previously published structures of ZIF-8 determined by X-ray crystallography. This demonstrates that MicroED can be a valuable tool for the analysis of beam-sensitive MOF structures directly from nano and microcrystalline material.

Dimensional Nanofillers in Mixed Matrix Membranes for Pervaporation Separations: A Review

Pervaporation (PV) has been an intriguing membrane technology for separating liquid mixtures since its commercialization in the 1980s. The design of highly permselective materials used in this respect has made significant improvements in separation properties, such as selectivity, permeability, and long-term stability. Mixed-matrix membranes (MMMs), featuring inorganic fillers dispersed in a polymer matrix to form an organic-inorganic hybrid, have opened up a new avenue to facilely obtain high-performance PV membranes. The combination of inorganic fillers in a polymer matrix endows high flexibility in designing the required separation properties of the membranes, in which various fillers provide specific functions correlated to the separation process. This review discusses recent advances in the use of nanofillers in PV MMMs categorized by dimensions including zero-, one-, two- and three-dimensional nanomaterials. Furthermore, the impact of the nanofillers on the polymer matrix is described to provide in-depth understanding of the structure-performance relationship. Finally, the applications of nanofillers in MMMs for PV separation are summarized.

Novel Mixed Matrix Sodium Alginate-Fullerenol Membranes: Development, Characterization, and Study in Pervaporation Dehydration of Isopropanol

Novel mixed matrix dense and supported membranes based on biopolymer sodium alginate (SA) modified by fullerenol were developed. Two kinds of SA–fullerenol membranes were investigated: untreated and cross-linked by immersing the dry membranes in 1.25 wt % calcium chloride (CaCl₂) in water for 10 min. The structural and physicochemical characteristics features of the SA–fullerenol composite were investigated by Fourier-transform infrared (FTIR) and nuclear magnetic resonance (NMR) spectroscopic methods, scanning electron (SEM) and atomic force (AFM) microscopies, thermogravimetric analysis (TGA), and swelling experiments. Transport properties were evaluated in pervaporation dehydration of isopropanol in a wide concentration range. It was found that the developed supported cross-linked SA-5/PAN^CaCl2 membrane (modified by 5 wt % fullerenol) possessed the best transport properties (the highest permeation fluxes 0.64–2.9 kg/(m² h) and separation factors 26–73,326) for the pervaporation separation of the water–isopropanol mixture in the wide concentration range (12–90 wt % water) at 22 °C and is suitable for the promising application in industry.

Layer-by-layer assembly of metal-organic framework nanosheets with polymer

Metal-organic framework (MOF) nanosheets are attracting more and more attention due to their tunable porous structure and two-dimensional shape. Adding MOF nanosheets into polymers can lead to improved properties, but the level of enhancement is usually thwarted by the difficulties in exfoliating and aligning these nanosheets within the polymer matrix. In order to establish a strategy for making polymer/MOF nanosheets composites with improved exfoliation and alignment, we combined MOF nanosheets and polymer using layer-by-layer (LbL) assembly for the first time. MOF nanosheets (ZIF67-L, leaf-like zeolitic imidazolate framework nanosheets) used in this study were functionalized with positively charged polyethylenimine, which could replace the original surface ligands and impart a positive charge on the nanosheet surface. These positively charged MOF nanosheets were then combined with negatively charged poly(acrylic acid) through ionic-bonding-assisted LbL assembly, generating a polymer composite with fully exfoliated and highly aligned MOF nanosheets.

Membranes for dehydration of alcohols via pervaporation

Alcohols are the essential chemicals used in a variety of pharmaceutical and chemical industries. The extreme purity of alcohols in many of such industrial applications is essential. Though distillation is one of the methods used conventionally to purify alcohols, the method consumes more energy and requires carcinogenic entertainers, making the process environmentally toxic. Alternatively, efforts have been made to focus research efforts on alcohol dehydration by the pervaporation (PV) separation technique using polymeric membranes. The present review is focused on alcohol dehydration using PV separation technique, which is the most efficient and benign method of purifying alcohols that are required in fine chemicals synthesis and developing pharmaceutical formulations. This review will discuss about the latest developments in the area of PV technique used in alcohol dehydration using a variety of novel membranes.

Nanostructured morphology control and phase transition of zeolitic imidazolate frameworks as an ultra-high performance adsorbent for water purification

By adjusting the methanol/water ratio to control the phases and morphologies, ZIFs showed enhanced performance for heavy metal adsorption.

Synthesis and carbon dioxide capture properties of flower-shaped zeolitic imidazolate framework-L

Flower-shaped zeolitic imidazolate framework-L (ZIF-L) nanostructures were synthesized by a coordination control method. The CO₂ adsorption capacity of flower-shaped ZIF-L was 1.15 mmol g⁻¹ at room temperature and 1 bar, which was higher than that of the two-dimensional ZIF-L.

Introducing hydrophilic ultra-thin ZIF-L into mixed matrix membranes for CO2/CH4 separation

Mixed matrix membranes (MMMs) were developed by mixing hydrophilically modified two-dimensional (2D) imidazole framework (named as hZIF-L) flakes into a Pebax MH 1657 (Pebax) matrix, and designed to separate carbon dioxide/methane (CO₂/CH₄) mixtures. The hZIF-L flakes were important for increasing the effectiveness of the MMMs. First, the tannic acid (TA) etched hZIF-L flakes have a large number of microporous (1.8 nm) and two-dimensional anisotropic transport channels, which offered convenient gas transport channels and improved the permeability of CO₂. Second, the TA molecules provide the surface of the ZIF-L flakes with more hydrophilic functional groups such as carbonyl groups (C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> O) and hydroxyl groups (–OH), which could effectively prevent non-selective interfacial voids and filler agglomeration in the Pebax matrix, and also presented strong binding ability to water and CO₂ molecules. The satisfactory interface compatibility and affinity with the CO₂ molecule promoted its permeability, solubility, and selectivity. As a result, the MMMs exhibited the highest performance of gas separation with the hZIF-L flake weight content of 5%, at which the CO₂ permeability and CO₂/CH₄ selectivity were 502.44 barrer and 33.82 at 0.2 MPa and 25 °C, respectively.

Schematic diagram of CO₂ transfer in Pebax/hZIF-L mixed matrix membranes.

Heterogeneous ZIF-L membranes with improved hydrophilicity and anti-bacterial adhesion for potential application in water treatment

Although different metal–organic framework (MOF) membranes have been widely studied for gas separation, their application for water treatment is still in its infancy. MOF membranes with improved hydrophilicity and stability are particularly essential for water/wastewater treatment. Herein, we have successfully developed heterogeneous membranes (Zn/Co-ZIF-L) composed of vertically standing leaf-like crystals of Zn-ZIF-L grown in situ onto porous ceramic supports, followed by the subsequent heterogeneous growth of Co-ZIF-L. The heterogeneous membranes show improved hydrophilicity (WCA = 13.6 ± 1.6°) and enhanced anti-bacterial adhesion. Significantly, they simultaneously deliver a relative high water flux and much improved anti-bacterial adhesion when compared with the homogeneous membranes (Co-ZIF-L and Zn-ZIF-L). The improvements are attributed to the intrinsic hydrophilic nature of Co-ZIF-L, their epitaxial growth onto Zn-ZIF-L as well as the increased surface roughness. The success of constructing a heterogeneous MOF structure shows an effective strategy to achieve the hydrophilic MOF membranes with considerably enhanced stability for water treatment.

Heterogeneous Zn/Co-ZIF-L membranes were prepared through the successive growth of Zn-ZIF-L and Co-ZIF-L on the macroporous ceramic supports, and the obtained heterogeneous membranes showed improved hydrophilicity and anti-bacterial adhesion.

Mixed Membranes Comprising Carboxymethyl Cellulose (as Capping Agent and Gas Barrier Matrix) and Nanoporous ZIF-L Nanosheets for Gas Separation Applications

Two-dimensional metal–organic framework (MOF) nanosheets with molecular sieving properties and unique dimensional advantages are highly desired as polymer fillers for gas separation applications. Regarding polymer-supported MOF membranes, it is crucial to enhance the adhesion between the polymeric substrate and the MOF component and avoid MOF particle agglomeration. In this study, hydrophobic, embedded nanoporous nanosheets of a 2D zeolitic imidazolate framework synthesized using zinc salt and 2-methylimidazole (Hmim) aqueous solution (ZIF-L) were incorporated into a carboxymethyl cellulose (CMC) solution to form a steady mixed aqueous suspension through one-step solution blending. This prepared the composite membranes with a fine dispersion of ZIF-L nanosheets (up to loadings of 52.88 vol %) and good adhesion within the highly dense structural CMC matrix due to the strong interactions between ZIF-L and CMC, as confirmed by FTIR, Zeta potential, XPS, and SEM analysis. The potential advantages of CMC over classic polymer matrices used for gas separation mainly include: (a) Good interaction, (b) high dispersion of ZIF-L nanosheets, (c) the gas barrier nature of the CMC membrane, and (d) a facile water-based synthetic process. Based on the molecular sieving effect of ZIF-L and the gas barrier nature of the CMC matrix, gas permeation tests (H₂, CO₂, N₂, CH₄) of the mixed membrane showed a great improvement in gas selectivities compared with the CMC membrane and the reported pure ZIF membranes.

New type of alginate/chitosan microparticle membranes for highly efficient pervaporative dehydration of ethanol

A new type of composite alginate membranes filled with chitosan (CS) and three different modified chitosan submicron particles, i.e. phosphorylated (CS-P), glycidol (CS-G) or glutaraldehyde (CS-GA) crosslinked ones, were prepared, and the pervaporation of water/ethanol mixture was investigated. The influence of various chitosan particles and their content on the transport properties of membranes was discussed. It was found that the addition of chitosan particles into the alginate matrix has a prominent effect on the ethanol/water separation efficiency. All tested membranes are characterized simultaneously by a high flux and selectivity, exhibiting advantageous properties, and outperforming numerous conventional materials. The best results were achieved for alginate membranes filled with phosphorylated chitosan particles at 10 wt%, for which separation factor, flux and PSI were equal to 136.2, 1.90 kg m-2 h-1 and 256.9 kg m-2 h-1, respectively.