Nutrient recovery from pig manure digestate using electrodialysis reversal: Membrane fouling and feasibility of long-term operation

The Development of Electroconvection at the Surface of a Heterogeneous Cation-Exchange Membrane Modified with Perfluorosulfonic Acid Polymer Film Containing Titanium Oxide

One way to enhance mass transfer and reduce fouling in wastewater electrodialysis is stimulation of electroconvective mixing of the solution adjoining membranes by modifying their surfaces. Several samples were prepared by casting the perfluorosulfonic acid (PFSA) polymer film doped with TiO₂ nanoparticles onto the surface of the heterogeneous cation-exchange membrane MK-40. It is found that changes in surface characteristics conditioned by such modification lead to an increase in the limiting current density due to the stimulation of electroconvection, which develops according to the mechanism of electroosmosis of the first kind. The greatest increase in the current compared to the pristine membrane can be obtained by modification with the film being 20 μm thick and containing 3 wt% of TiO₂. The sample containing 6 wt% of TiO₂ provides higher mass transfer in overlimiting current modes due to the development of nonequilibrium electroconvection. A 1.5-fold increase in the thickness of the modifying film reduces the positive effect of introducing TiO₂ nanoparticles due to (1) partial shielding of the nanoparticles on the surface of the modified membrane; (2) a decrease in the tangential component of the electric force, which affects the development of electroconvection.

Non-biological methods for phosphorus and nitrogen removal from wastewater: A gap analysis of reinvented-toilet technologies with respect to ISO 30500

The aims of the Reinvent the Toilet Challenge (RTTC) include creation of an off-the-grid sanitation system with operating costs of less than US$0.05 per user per day. Because of the small scale at which many reinvented toilets (RT) are intended to operate, non-biological treatment has been generally favored. The RTTC has already instigated notable technological advances in non-sewered sanitation systems (NSSS). However, increasingly stringent liquid effluent standards for N and P could limit the deployment of current RT in real-world scenarios, despite the urgent need for these systems. The newly adopted ISO 30500 standards for water reuse in NSSS dictate minimal use of chemical/biological additives, while at the same time requiring a 70% and 80% reduction in total nitrogen and phosphorus, respectively. This document provides a brief overview of the mature and emerging technologies for N and P (specifically ammonia/ammonium and orthophosphate) removal from wastewater. At present, the dearth of nutrient removal methods proven to be effective at small scales is a significant barrier to meeting ISO 30500 standards. Closing the gap between RTs and ISO 30500 will require significant investments in basic R&D of emerging technologies for non-biological N and P remediation and/or increased reliance on biological processes. Adaptation of existing nutrient-removal technologies to small-scale NSSS is a viable option that merits additional investigation.

New frontiers from removal to recycling of nitrogen and phosphorus from wastewater in the Circular Economy

Nutrient recovery technologies are rapidly expanding due to the need for the appropriate recycling of key elements from waste resources in order to move towards a truly sustainable modern society based on the Circular Economy. Nutrient recycling is a promising strategy for reducing the depletion of non-renewable resources and the environmental impact linked to their extraction and manufacture. However, nutrient recovery technologies are not yet fully mature, as further research is needed to optimize process efficiency and enhance their commercial applicability. This paper reviews state-of-the-art of nutrient recovery, focusing on frontier technological advances and economic and environmental innovation perspectives. The potentials and limitations of different technologies are discussed, covering systems based on membranes, photosynthesis, crystallization and other physical and biological nutrient recovery systems (e.g. incineration, composting, stripping and absorption and enhanced biological phosphorus recovery).

Concentration Dependencies of Diffusion Permeability of Anion-Exchange Membranes in Sodium Hydrogen Carbonate, Monosodium Phosphate, and Potassium Hydrogen Tartrate Solutions

The concentration dependencies of diffusion permeability of homogeneous (AMX-Sb and AX) and heterogeneous (MA-41 and FTAM-EDI) anion-exchange membranes (AEMs) is obtained in solutions of ampholytes (sodium bicarbonate, NaHCO₃; monosodium phosphate, NaH₂PO₄; and potassium hydrogen tartrate, KHT) and a strong electrolyte (sodium chloride, NaCl). It is established that the diffusion permeability of AEMs increases with dilution of the ampholyte solutions, while it decreases in the case of the strong electrolyte solution. The factors causing the unusual form of concentration dependencies of AEMs in the ampholyte solutions are considered: (1) the enrichment of the internal AEM solution with multiply charged counterions and (2) the increase in the pore size of AEMs with dilution of the external solution. The enrichment of the internal solution of AEMs with multiply charged counterions is caused by the Donnan exclusion of protons, which are the products of protolysis reactions. The increase in the pore size is conditioned by the stretching of the elastic polymer matrix due to the penetration of strongly hydrated anions of carbonic, phosphoric, and tartaric acids into the AEMs.

Partial Fluxes of Phosphoric Acid Anions through Anion-Exchange Membranes in the Course of NaH2PO4 Solution Electrodialysis

Electrodialysis (ED) with ion-exchange membranes is a promising method for the extraction of phosphates from municipal and other wastewater in order to obtain cheap mineral fertilizers. Phosphorus is transported through an anion-exchange membrane (AEM) by anions of phosphoric acid. However, which phosphoric acid anions carry the phosphorus in the membrane and the boundary solution, that is, the mechanism of phosphorus transport, is not yet clear. Some authors report an unexpectedly low current efficiency of this process and high energy consumption. In this paper, we report the partial currents of H2PO4-, HPO42-, and PO43- through Neosepta AMX and Fujifilm AEM Type X membranes, as well as the partial currents of H2PO4- and H+ ions through a depleted diffusion layer of a 0.02 M NaH2PO4 feed solution measured as functions of the applied potential difference across the membrane under study. It was shown that the fraction of the current transported by anions through AEMs depend on the total current density/potential difference. This was due to the fact that the pH of the internal solution in the membrane increases with the growing current due to the increasing concentration polarization (a lower electrolyte concentration at the membrane surface leads to higher pH shift in the membrane). The HPO42- ions contributed to the charge transfer even when a low current passed through the membrane; with an increasing current, the contribution of the HPO42- ions grew, and when the current was about 2.5 ilimLev (ilimLev was the theoretical limiting current density), the PO43- ions started to carry the charge through the membrane. However, in the feed solution, the pH was 4.6 and only H2PO4- ions were present. When H2PO4- ions entered the membrane, a part of them transformed into doubly and triply charged anions; the H+ ions were released in this transformation and returned to the depleted diffusion layer. Thus, the phosphorus total flux, jP (equal to the sum of the fluxes of all phosphorus-bearing species) was limited by the H2PO4- transport from the bulk of feed solution to the membrane surface. The value of jP was close to ilimLev/F (F is the Faraday constant). A slight excess of jP over ilimLev/F was observed, which is due to the electroconvection and exaltation effects. The visualization showed that electroconvection in the studied systems was essentially weaker than in systems with strong electrolytes, such as NaCl.

Non-biological methods for phosphorus and nitrogen removal from wastewater: A gap analysis of reinvented-toilet technologies with respect to ISO 30500

The aims of the Reinvent the Toilet Challenge (RTTC) include creation of an off-the-grid sanitation system with operating costs of less than US$0.05 per user per day. Because of the small scale at which many reinvented toilets (RT) are intended to operate, non-biological treatment has been generally favored. The RTTC has already instigated notable technological advances in non-sewered sanitation systems (NSSS). However, increasingly stringent effluent standards for N and P could limit the deployment of current RT in real-world scenarios, despite the urgent need for these systems. The newly adopted ISO 30500 standards for water reuse in NSSS dictate minimal use of chemical/biological additives, while at the same time requiring a 70% and 80% reduction in total nitrogen and phosphorus, respectively. This document provides a brief overview of the mature and emerging technologies for N and P removal from wastewater. At present, the dearth of nutrient removal methods proven to be effective at small scales is a significant barrier to meeting ISO 30500 standards. Closing the gap between RTs and ISO 30500 will require significant investments in basic R&D of emerging technologies for non-biological N and P remediation and/or increased reliance on biological processes. Adaptation of existing nutrient-removal technologies to small-scale NSSS is a viable option that merits additional investigation.