Super-paramagnetic responsive silk fibroin/chitosan/magnetite scaffolds with tunable pore structures for bone tissue engineering applications

Magnetic bioinspired micro/nanostructured composite scaffold for bone regeneration

Magnetic-responsive materials are promising for applications in various biomedical fields. Especially, superparamagnetic nanoparticles are widely used in magnetic system for bone tissue engineering owing to superior biocompatibility and long term stability. Based on the idea of in situ bionics, we successfully incorporate the nano-hydroxyapatite (nHAP) and Fe₃O₄ nanoparticles which were prepared by in situ crystallization and freeze-drying technique into the chitosan/collagen (CS/Col) organic matrix to achieve the uniform dispersion of inorganic substrate with nanometer-scale. The in vitro results of the physicochemical and biocompatibility tests showed that CS/Col/Fe₃O₄/nHAP magnetic scaffold possessed superior structural and mechanical performance for cell adhesion and proliferation, as well as the osteogenic differentiation. Mineralization experiments showed better bioactive and good ability of in situ biomimetic mineralization. Moreover, from the in vivo model of SD rats' skull defects proved that the CS/Col/Fe₃O₄/nHAP hybrid scaffold had a better tissue compatibility and higher bone regeneration ability when implanted into the skull defects comparing to control group. Herein, the magnetic hybrid micro/nanostructured scaffold showed a potential application for bone defect repair.

Bone tissue engineering: Scaffold preparation using chitosan and other biomaterials with different design and fabrication techniques

In the recent years, a paradigm shift is taking place where metallic/synthetic implants and tissue grafts are being replaced by tissue engineering approach. A well designed three-dimensional scaffold is one of the fundamental tools to guide tissue formation in vitro and in vivo. Bone is a highly dynamic and an integrative tissue, and thus enormous efforts have been invested in bone tissue engineering to design a highly porous scaffold which plays a critical role in guiding bone growth and regeneration. Numerous techniques have been developed to fabricate highly interconnected, porous scaffold for bone tissue engineering applications with the help of biomolecules such as chitosan, collagen, gelatin, silk, etc. We aim, in this review, to provide an overview of different types of fabrication techniques for scaffold preparation in bone tissue engineering using biological macromolecules.

Trinity of Three-Dimensional (3D) Scaffold, Vibration, and 3D Printing on Cell Culture Application: A Systematic Review and Indicating Future Direction

Cell culture and cell scaffold engineering have previously developed in two directions. First can be 'static into dynamic', with proven effects that dynamic cultures have benefits over static ones. Researches in this direction have used several mechanical means, like external vibrators or shakers, to approximate the dynamic environments in real tissue, though such approaches could only partly address the issue. Second, can be '2D into 3D', that is, artificially created three-dimensional (3D) passive (also called 'static') scaffolds have been utilized for 3D cell culture, helping external culturing conditions mimic real tissue 3D environments in a better way as compared with traditional two-dimensional (2D) culturing. In terms of the fabrication of 3D scaffolds, 3D printing (3DP) has witnessed its high popularity in recent years with ascending applicability, and this tendency might continue to grow along with the rapid development in scaffold engineering. In this review, we first introduce cell culturing, then focus 3D cell culture scaffold, vibration stimulation for dynamic culture, and 3DP technologies fabricating 3D scaffold. Potential interconnection of these realms will be analyzed, as well as the limitations of current 3D scaffold and vibration mechanisms. In the recommendation part, further discussion on future scaffold engineering regarding 3D vibratory scaffold will be addressed, indicating 3DP as a positive bridging technology for future scaffold with integrated and localized vibratory functions.

Protein-Based Fiber Materials in Medicine: A Review

Fibrous materials have garnered much interest in the field of biomedical engineering due to their high surface-area-to-volume ratio, porosity, and tunability. Specifically, in the field of tissue engineering, fiber meshes have been used to create biomimetic nanostructures that allow for cell attachment, migration, and proliferation, to promote tissue regeneration and wound healing, as well as controllable drug delivery. In addition to the properties of conventional, synthetic polymer fibers, fibers made from natural polymers, such as proteins, can exhibit enhanced biocompatibility, bioactivity, and biodegradability. Of these proteins, keratin, collagen, silk, elastin, zein, and soy are some the most common used in fiber fabrication. The specific capabilities of these materials have been shown to vary based on their physical properties, as well as their fabrication method. To date, such fabrication methods include electrospinning, wet/dry jet spinning, dry spinning, centrifugal spinning, solution blowing, self-assembly, phase separation, and drawing. This review serves to provide a basic knowledge of these commonly utilized proteins and methods, as well as the fabricated fibers’ applications in biomedical research.

Agarose-based biomaterials for tissue engineering

Agarose is a natural polysaccharide polymer having unique characteristics that give reason to consider it for tissue engineering applications. Special characteristics of agarose such as its excellent biocompatibility, thermo-reversible gelation behavior and physiochemical features support its use as a biomaterial for cell growth and/or controlled/localized drug delivery. The resemblance of this natural carbohydrate polymer to the extracellular matrix results in attractive features that bring about a strong interest in its usage in the field. The scope of this review is to summarize the extensive researches addressing agarose-based biomaterials in order to provide an in-depth understanding of its tissue engineering-related applications.

Advances in Magnetic Nanoparticles for Biomedical Applications

Magnetic nanoparticles (NPs) are emerging as an important class of biomedical functional nanomaterials in areas such as hyperthermia, drug release, tissue engineering, theranostic, and lab-on-a-chip, due to their exclusive chemical and physical properties. Although some works can be found reviewing the main application of magnetic NPs in the area of biomedical engineering, recent and intense progress on magnetic nanoparticle research, from synthesis to surface functionalization strategies, demands for a work that includes, summarizes, and debates current directions and ongoing advancements in this research field. Thus, the present work addresses the structure, synthesis, properties, and the incorporation of magnetic NPs in nanocomposites, highlighting the most relevant effects of the synthesis on the magnetic and structural properties of the magnetic NPs and how these effects limit their utilization in the biomedical area. Furthermore, this review next focuses on the application of magnetic NPs on the biomedical field. Finally, a discussion of the main challenges and an outlook of the future developments in the use of magnetic NPs for advanced biomedical applications are critically provided.

Biodegradable, pH-sensitive chitosan beads obtained under microwave radiation for advanced cell culture

A new type of promising chitosan beads with advanced properties were obtained under microwave radiation according to Green Chemistry principles. Biomaterials were prepared using chitosan as raw material and glutamic acid/1,5-pentanodiol mixture as crosslinking agents. Additionally beads were modified with Tilia platyphyllos extract to enhance their antioxidant properties. Beads were investigated over their chemical structure by FT-IR analysis. Also their morphology has been investigated by SEM method. Additionally swelling capacity of the obtained hydrogels was determined. Lack of cytotoxicity has been confirmed by MTT assay. Proliferation studies were carried out on L929 mouse fibroblasts. Advanced properties of the obtained beads were investigated by studying pH sensitivity and antioxidant properties by DPPH method. Also susceptibility to degradation and biodegradation by Sturm Test method was evaluated. Results shows that proposed chitosan beads and their eco-friendly synthesis method can be applied in cell therapy and tissue engineering.

MgAl layered double hydroxide/chitosan porous scaffolds loaded with PFTα to promote bone regeneration

Poor bone formation remains a key risk factor associated with acellular scaffolds that occurs in some bone defects, particularly in patients with metabolic bone disorders and local osteoporosis. We herein fabricated for the first time layered double hydroxide-chitosan porous scaffolds loaded with PFTα (LDH-CS-PFTα scaffolds) as therapeutic bone scaffolds for the controlled release of PFTα to enhance stem cell osteogenic differentiation and bone regeneration. The LDH-CS scaffolds had three-dimensional interconnected macropores, and plate-like LDH nanoparticles were uniformly dispersed within or on the CS films. The LDH-CS scaffolds exhibited appropriate PFTα drug delivery due to hydrogen bonding among LDH, CS and PFTα. In vitro functional studies demonstrated that the PFTα molecules exhibited potent ability to induce osteogenesis of hBMSCs via the GSK3β/β-catenin pathway, and the LDH-CS-PFTα scaffolds significantly enhanced the osteogenic differentiation of hBMSCs. In vivo studies revealed significantly increased repair and regeneration of bone tissue in cranial defect model rats compared to control rats at 12 weeks post-implantation. In conclusion, the LDH-CS-PFTα scaffolds exhibited excellent osteogenic differentiation and bone regeneration capability and hold great potential for applications in defined local bone regeneration.

Mussel-inspired surface modification of titania nanotubes as a novel drug delivery system

Titania nanotubes (TNT_s) have attracted considerable attention for the development of new devices for local drug delivery applications. In this study TNT_s were synthesized by hydrothermal method from titania nanoparticles and then the surface of TNT_s were functionalized by in situ polymerization of bioinspired polydopamine (PDA). The proposed strategies emphasized on remarkable properties of these materials and their unique combination to design local drug delivery system with advanced performance. The samples were characterized using Transmission Electron Microscope (TEM), Field Emission Scanning Electron Microscope (FESEM), X-ray diffraction pattern (XRD), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and surface area analysis (BET). The results showed that the specific surface area significantly is increased by creating tubular nanostructure. TGA results indicated Surface functionalization of TNT_s with PDA (TNT_s-PDA) about 19.3% that led to increase biocompatibility and bioactivity of TNT_s as well as improve drug loading and release properties. It is attributed to the effect of NH₂ groups which immobilize drug molecules on the TNT_s. According to the obtained release profiles for the samples, the release profiles followed from a Hill model. Thus, PDA modified TNT_s can be excellent candidate as specific drug delivery systems.

Silk fibroin/kappa-carrageenan composite scaffolds with enhanced biomimetic mineralization for bone regeneration applications

The combination of protein-polysaccharide in scaffolding together with the ability to induce bone-like apatite formation has become a promising approach to mimic extracellular matrix composition. In the present study, we developed and characterized new bioactive composite scaffolds from kappa-carrageenan/silk fibroin for bone regeneration applications. Three dimensional (3D) scaffolds were fabricated by adding various amounts of carrageenan to a silk fibroin solution, followed by freeze-drying. Various characterization techniques were applied to analyze such items as the structure, morphology, compressive strength, and bone-like apatite mineralization of the composites, which were then compared to those of pure fibroin scaffolds. The results demonstrated the formation of a highly porous structure with interconnected pores. The mean pore size and porosity both increased by increasing carrageenan content. Moreover, the addition of carrageenan to silk fibroin led to the formation of a bone-like apatite layer throughout the scaffolds after 7days of soaking them in simulated body fluid. Osteoblast-like cell (MG 63) culture experiments indicated that all scaffolds are biocompatible. The cells attached well to the surfaces of all scaffolds and tended to join their adjacent cells. However, higher carrageenan content led to better cellular proliferation and higher Alkaline phosphatase expression.

Enhancement of magnetofection efficiency using chitosan coated superparamagnetic iron oxide nanoparticles and calf thymus DNA

Superparamagnetic iron oxide nanoparticles (MNPs) were prepared and coated with chitosan (CS). The chitosan-magnetic iron oxide nanoparticles (CS-MNPs) were characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), vibrating sample magnetometry (VSM), and the morphology of the particles was studied by transmission electron microscopy (TEM). Our findings show that the magnetic particles were monodisperse (10nm mean diameter) and exhibited superparamagnetic behavior. The interaction between the particles and calf-thymus DNA (DNA) in physiological buffer was studied with UV-vis, fluorescence and circular dichroism spectroscopy and zeta potential. Spectroscopic studies were indicated DNA conformational changes in the presence of CS-MNPs. Binding and thermodynamic parameters at different temperatures were calculated using the Stern-Volmer, Hill, Scatchard and Van't Hoff equations. The binding process was spontaneous and interactions were electrostatic with the appropriate binding constant (K_b=4.52×10³M^-1, 3.69×10³M^-1 and 3.02×10³M^-1 at 300K, 310K and 320K, respectively). Zeta potential measurements of DNA continually increased with the addition of CS-MNPs, supporting our thermodynamic findings. Moreover, CS-MNPs were able to quench the fluorescence of DNA-intercalated ethidium bromide (DNA-EB) by a static quenching mechanism. Cytotoxicity studies show that the DNA-CS-MNP system is biocompatible with a human foreskin fibroblast cell line, HFFF2. Collectively, these results suggest that surface cationic magnetic chitosan-iron oxide nanoparticles can potentially enhance magnetofection efficiency.