Modern developments in gas chromatography-mass spectrometry-based environmental analysis

Improved gas chromatography-tandem mass spectrometry determination of pesticide residues making use of atmospheric pressure chemical ionization

The capabilities of a recently launched atmospheric pressure chemical ionization (APCI) source for mass spectrometry (MS) coupled to gas chromatography (GC) have been tested in order to evaluate its potential in pesticide residue analysis in fruits and vegetables. Twenty-five pesticides were selected due to their high fragmentation under electron ionization (EI), making that the molecular ion (M+) is practically absent in their spectra. The fragmentation of these pesticides under APCI conditions was studied, with the result that M+ was not only present but also highly abundant for most compounds, with noticeable differences in the fragmentation patterns in comparison with EI. Moreover, the addition of water as modifier was tested to promote the formation of protonated molecules ([M+H]+). Under these conditions, [M+H]+ became the base peak of the spectrum for the majority of compounds, thus leading to an increase of sensitivity in the subsequent GC-MS/MS method developed using triple quadrupole analyzer (QqQ). Highly satisfactory sensitivity and precision, in terms of repeatability, were reached and linearity was satisfactory in the range 0.01-100 ng/mL. The developed methodology was applied to apple, orange, tomato and carrot QuEChERS fortified extracts in order to evaluate the matrix effects. In summary, the soft and reproducible ionization in the APCI source has greatly favored the formation of [M+H]+ oppositely to EI where abundant fragmentation occurs and where the molecular ions have low abundance or are even absent in the mass spectrum. In this way, the use of APCI has facilitated the development of tandem MS methods based on the selection of abundant [M+H]+ as precursor ion.

Current use of high-resolution mass spectrometry in the environmental sciences

During the last two decades, mass spectrometry (MS) has been increasingly used in the environmental sciences with the objective of investigating the presence of organic pollutants. MS has been widely coupled with chromatographic techniques, both gas chromatography (GC) and liquid chromatography (LC), because of their complementary nature when facing a broad range of organic pollutants of different polarity and volatility. A clear trend has been observed, from the very popular GC-MS with a single quadrupole mass analyser, to tandem mass spectrometry (MS-MS) and, more recently, high-resolution mass spectrometry (HRMS). For years GC has been coupled to HR magnetic sector instruments, mostly for dioxin analysis, although in the last ten years there has been growing interest in HRMS with time-of-flight (TOF) and Orbitrap mass analyzers, especially in LC-MS analysis. The increasing interest in the use of HRMS in the environmental sciences is because of its suitability for both targeted and untargeted analysis, owing to its sensitivity in full-scan acquisition mode and high mass accuracy. With the same instrument one can perform a variety of tasks: pre- and post-target analysis, retrospective analysis, discovery of metabolite and transformation products, and non-target analysis. All these functions are relevant to the environmental sciences, in which the analyst encounters thousands of different organic contaminants. Thus, wide-scope screening of environmental samples is one of the main applications of HRMS. This paper is a critical review of current use of HRMS in the environmental sciences. Needless to say, it is not the intention of the authors to summarise all contributions of HRMS in this field, as in classic descriptive reviews, but to give an overview of the main characteristics of HRMS, its strong potential in environmental mass spectrometry and the trends observed over the last few years. Most of the literature has been acquired since 2005, coinciding with the growth and popularity of HRMS in this field, with a few exceptions that deserve to be mentioned because of their relevance.

A label-free electrochemical immunosensor for carbofuran detection based on a sol-gel entrapped antibody

In this study, an anti-carbofuran monoclonal antibody (Ab) was immobilized on the surface of a glassy carbon electrode (GCE) using silica sol-gel (SiSG) technology. Thus, a sensitive, label-free electrochemical immunosensor for the direct determination of carbofuran was developed. The electrochemical performance of immunoreaction of antigen with the anti-carbofuran monoclonal antibody was investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), in which phosphate buffer solution containing [Fe(CN)(6)](3-/4-) was used as the base solution for test. Because the complex formed by the immunoreaction hindered the diffusion of [Fe(CN)(6)](3-/4-) on the electrode surface, the redox peak current of the immunosensor in the CV obviously decreased with the increase of the carbofuran concentration. The pH of working solution, the concentration of Ab and the incubation time of carbofuran were studied to ensure the sensitivity and conductivity of the immunosensor. Under the optimal conditions, the linear range of the proposed immunosensor for the determination of carbofuran was from 1 ng/mL to 100 μg/mL and from 50 μg/mL to 200 μg/mL with a detection limit of 0.33 ng/mL (S/N = 3). The proposed immunosensor exhibited good high sensitivity and stability, and it was thus suitable for trace detection of carbofuran pesticide residues.

Infrared hollow waveguide sensors for simultaneous gas phase detection of benzene, toluene, and xylenes in field environments

Simultaneous and molecularly selective parts-per-billion detection of benzene, toluene, and xylenes (BTX) using a thermal desorption (TD)-FTIR hollow waveguide (HWG) trace gas sensor is demonstrated here for the first time combining laboratory calibration with real-world sample analysis in field. A calibration range of 100-1000 ppb analyte/N(2) was developed and applied for predicting the concentration of blinded environmental air samples within the same concentration range, and demonstrate close agreement with the validation method used here, GC-FID. The analyte concentration prediction capability of the TD-FTIR-HWG trace gas sensor also compares well with the industrial standard and other experimental techniques including GC-PID, ultrafast GC-FID, and GC-DMS, which were simultaneously operated in the field. With the advent of a quantum cascade laser with emission frequencies specifically tailored to efficiently overlap benzene absorption as the most relevant analyte, the overall sensor footprint could be considerably reduced to ultimately yield hand-held trace gas sensors facilitating direct and real-time detection of BTX in air down to low ppb levels.

[Chemical methods for determination of hydroxylated metabolites of polycyclic aromatic hydrocarbons and polychlorinated biphenyls in biological material]

This review presents methods for the analysis of hydroxylated metabolites of polycyclic aromatic hydrocarbons and polychlorinated biphenyls in humans and animals. These metabolites serve as biomarkers of human and animal exposure to the mentioned pollutants, but some metabolites also have toxic properties. Most are analysed in urine, which is the most accessible sample, but they can also be analysed in human and animal liver, bile, and adipose tissue.Their analysis is important for assessing bioavailability of aromatic pollutants and their toxicity in human organism, but also the toxicity of metabolites themselves. Advancements in analytical methods have made it possible to analyse multiple metabolites in a sample at the same time. New extraction techniques and more precise and selective qualitative and quantitative analyses can now detect very low metabolite concentrations. An extra advantage is that these simple techniques require less chemicals and time.

Halogenated persistent organic pollutants and polycyclic aromatic hydrocarbons in food

During recent years, mass spectrometry (MS) and hyphenated chromatographic instrumentation and techniques have been a subject of dramatic developments, resulting in the introduction of various useful tools for the analysis of halogenated persistent organic pollutants (POPs) and polycyclic aromatic hydrocarbons (PAHs) in food and environmental matrices. This chapter describes state-of-the-art in the field of MS as a primary detection tool for the halogenated POPs and PAHs previously separated using either gas chromatography (GC) or liquid chromatography (LC). Since sample preparation practice plays a crucial role for obtaining optimal performance characteristics of a particular analytical method, a brief overview of sample extraction and clean-up procedures in the POPs/PAHs analysis is also briefly outlined.

Determination and occurrence of phthalates, alkylphenols, bisphenol A, PBDEs, PCBs and PAHs in an industrial sewage grid discharging to a Municipal Wastewater Treatment Plant

Industrial and urban discharges release organic contaminants which might affect the quality of receiving waters if not properly eliminated in Wastewater Treatment Plants (WWTP). This study is aimed to evaluate the source, transport and fate of contaminants of industrial origin in a sewage grid discharging to a WWTP and finally to the sea. The sampling network covered an industrial and urban area and wastewaters, influents and effluents of a WWTP were analyzed using a newly developed multiresidual method to capture a wide range contaminants (phthalates, alkylphenols, bisphenol A, PBDEs, PCBs and PAHs). Alkylphenols and phthalates followed by PAHs were the main compounds detected at levels between 0.01 to 698 microg l(-1) in the sewage pipelines. At the WWTP influent they were detected at concentrations up to 345 microg l(-1). The contaminant load was eliminated in a 64-92% during the primary and secondary treatment of the plant. However, alkylphenols, phthalates bisphenol A and traces of PAHs were discharged with the effluent, producing a total net input of 825 g d(-1) to the sea. The study of wastewaters herein proposed can be used to better predict the loads into WWTP to improve treatment conditions according to specific sewage inputs and to assess the risks associated with the continuous discharge of contaminants to receiving plants.

Analysis of Polychlorinated Dibenzo-p-Dioxins and Polychlorinated Dibenzofurans in Soil and Sediment

This review presents methods for the analysis of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs), called dioxins, in soil and sediment. These compounds are produced as by-products of different combustion processes, and because of their persistency and toxicity they present a threat for animal and human health. Due to their high organic matter content, soil and sediment can accumulate dioxins and have become important secondary emission sources. Determining dioxins in these samples is complex because dioxins are present in trace levels and have to be separated from interferences whereas other classes of organic contaminants are present in higher concentrations. After sampling, follows extraction of compounds with a suitable solvent, extract clean-up from unwanted compounds, and qualitative and quantitative analysis. At the end of this review, we gave levels of PCDD/PCDFs found in soil and sediment samples.

Searching for anthropogenic contaminants in human breast adipose tissues using gas chromatography-time-of-flight mass spectrometry

The potential of gas chromatography-time-of-flight mass spectrometry (GC-TOF MS) for screening anthropogenic organic contaminants in human breast adipose tissues has been investigated. Initially a target screening was performed for a list of 125 compounds which included persistent halogen pollutants [organochlorine (OC) pesticides, polychlorinated biphenylss (PCBs), polybrominated diphenyl ethers (PBDEs)], polyaromatic hydrocarbons (PAHs), alkylphenols, and a notable number of pesticides from the different fungicide, herbicide and insecticide families. Searching for target pollutants was done by evaluating the presence of up to five representative ions for every analyte, all measured at accurate mass (20-mDa mass window). The experimental ion abundance ratios were then compared to those of reference standards for confirmation. Sample treatment consisted of an extraction with hexane and subsequent normal-phase (NP) High performance liquid chromatography (HPLC) or SPE cleanup. The fat-free LC fractions were then investigated by GC-TOF MS.Full-spectral acquisition and accurate mass data generated by GC-TOF MS also allowed the investigation of nontarget compounds using appropriate processing software to manage MS data. Identification was initially based on library fit using commercial nominal mass libraries. This was followed by comparing the experimental accurate masses of the most relevant ions with the theoretical exact masses with calculations made using the elemental composition calculator included in the software.The application of both target and nontarget approaches to around 40 real samples allowed the detection and confirmation of several target pollutants including p,p'-DDE, hexachlorobenzene (HCB), and some polychlorinated biphenyls (PCBs) and polyaromatic hydrocarbons (PAHs). Several nontarget compounds that could be considered anthropogenic pollutants were also detected. These included 3,5-di-tert-butyl-4-hydroxy-toluene (BHT) and its metabolite 3,5-di-tert-butyl-4-hydroxybenzaldehyde (BHT-CHO), dibenzylamine, N-butyl benzenesulfonamide (N-BBSA), some naphthalene-related compounds and several PCBs isomers not included in the target list. As some of the compounds detected are xenoestrogens, the methodology developed in this paper could be useful in human breast cancer research.

Implementation of DART and DESI ionization on a fieldable mass spectrometer

A recently developed prototype mobile laboratory mass spectrometer, incorporating an atmospheric pressure ionization (API) interface, is described. This system takes advantage of the small size, lower voltage requirements, and tandem MS abilities of the cylindrical ion trap mass analyzer. The prototype API MS uses small, low-power pumps to fit into a 0.1-m(3) self-contained package weighing <45 kg. This instrument has been adapted to allow rapid interfacing to electrospray ionization, desorption electrospray ionization, and direct analysis in real-time sources. Initial data indicate that these techniques provide rapid detection and identification of compounds for quality control, homeland security, and forensic applications. In addition, this instrument is self-contained and compact, making it ideally extensible to mobile laboratory and field analyses. Initial MS and MS/MS data for analyses of drugs, food, and explosives are presented herein.

Methodical approach for the use of GC-TOF MS for screening and confirmation of organic pollutants in environmental water

The potential of gas chromatography coupled to time-of-flight mass spectrometry (GC-TOF MS) for the screening of organic pollutants in water was explored. After a conventional SPE step with C(18) cartridges, the comparison of spectra with available libraries together with an evaluation of the mass accuracy was the first approach used for the screening and confirmation of target analytes. However, at low analyte concentrations (i.e. below 0.1 microg/l), this procedure was not feasible and the use of the application manager TargetLynx was evaluated. This application allows the selection of up to five representative ions per analyte, measured with high mass accuracy, and their intensity ratio evaluation. Ion selection, extraction mass window and concentration levels were found to be the critical parameters. The reference compound used as 'lock mass' was also found to affect to the quality of information obtained in some particular cases. Full spectral acquisition data generated by the TOF MS analyzer allowed investigation of the presence of several analytes in samples in a post-target style, without the need of reanalyze the water samples.Finally, a methodical approach was established for the reliable screening and confirmation of organic pollutants (PAHs, pesticides, octyl/nonyl phenols) in real-world samples, which led to satisfactory results of approximately 0.1 microg/l.

Pulsed large volume injection gas chromatography coupled with electron-capture negative ionization quadrupole mass spectrometry for simultaneous determination of typical halogenated persistent organic pollutants

A pulsed large-volume injection gas chromatography coupled with electron-capture negative ionization quadrupole mass spectrometry (pLVI-GC/ECNI-qMS) was developed for the simultaneous determination of typical halogenated persistent organic pollutants (H-POPs). By monitoring the characteristic ions of large mass-to-charge ratio (m/z) for each of the H-POPs rather than the chlorine and/or bromine ions, this method avoided the possible interferences arising from the H-POPs themselves and from complex matrices encountered frequently in current GC/qMS methods; and allowed, on the other hand, the use of (13)C-labeled and perdeuterated analogues as internal standards for reliable quantification. pLVI up to 120 microL improved the instrumental detection limits down to pg-fg mL(-1), comparable to or lower than those obtained by the recognized GC/high-resolution MS methods reported so far. The H-POPs including 12 polybrominated diphenyl ethers, 1 polybrominated biphenyl, 10 polychlorinated biphenyls (PCBs), 4 hexachlorocyclohexane isomers, and hexachlorobenzene were involved in this study. The method developed demonstrated good linearity (r(2) = 0.9904-0.9999) within 0.5 to 50,000 pg mL(-1) for PCBs and 0.05 to 5000 pg mL(-1) for other H-POPs, and was satisfactory in terms of both repeatability (0.07%-2.2%) and reproducibility (2.1%-8.4%). It was validated by analyzing a NIST standard reference material SRM-1946 of Lake Superior fish tissue with low 0.01 to 63 pg g(-1) method detection limits, and successfully applied to the determination of the H-POPs in five reference materials of different matrices.

The future of liquid chromatography-mass spectrometry (LC-MS) in metabolic profiling and metabolomic studies for biomarker discovery

The future utility of liquid chromatography-mass spectrometry (LC-MS) in metabolic profiling and metabolomic studies for biomarker discover will be discussed, beginning with a brief description of the evolution of metabolomics and the utilization of the three most popular analytical platforms in such studies: NMR, GC-MS, and LC-MS. Emphasis is placed on recent developments in high-efficiency LC separations, sensitive electrospray ionization approaches, and the benefits to incorporating both in LC-MS-based approaches. The advantages and disadvantages of various quantitative approaches are reviewed, followed by the current LC-MS-based tools available for candidate biomarker characterization and identification. Finally, a brief prediction on the future path of LC-MS-based methods in metabolic profiling and metabolomic studies is given.

Determination of priority organic micro-pollutants in water by gas chromatography coupled to triple quadrupole mass spectrometry

A multiclass method has been developed for screening, quantification and confirmation of organic micro-pollutants in water by gas chromatography coupled to mass spectrometry with a triple quadrupole analyzer. The work has been focused on the determination of more than 50 compounds belonging to different chemical families: 19 organochlorine and organophosphorus insecticides, 6 herbicides, 7 polychlorinated biphenyls, 16 polycyclic aromatics hydrocarbons, 2 brominated diphenyl ethers, and 3 octyl/nonyl phenols and pentachlorobenzene. Most of these analytes are included in the list of priority substances in the framework on European Water Policy. Analyte extraction was performed by solid phase extraction using C18 cartridges, and five isotopically labeled standards were added before extraction as surrogates. Analyses were performed by gas chromatography with tandem mass spectrometry (MS/MS) in electron impact mode. Accuracy and precision were evaluated by means of recovery experiments using water samples fortified at two concentration levels (25 and 250 ng L(-1)), with satisfactory results for most of analytes. The excellent selectivity and sensitivity reached in selected reaction monitoring mode allowed us satisfactory quantification and confirmation at levels as low as 25 ng L(-1). Two MS/MS transitions were acquired for each analyte, using the Q/q intensity ratio as a confirmatory parameter. The method developed was applied to the analysis of surface, ground and wastewater samples collected from the Valencia Region (Spain). Analytical methodology using negative chemical ionization mode was also validated for the organochlorine compounds selected, showing a superior sensitivity and lower detection limits.

New strategies to screen for endocrine-disrupting chemicals in the Portuguese marine environment utilizing large volume injection-capillary gas chromatography-mass spectrometry combined with retention time locking libraries (LVI-GC-MS-RTL)

A new analytical strategy to screen for endocrine-disrupting chemicals (EDCs) in environmental matrices is presented. The strategy uses solid-phase extraction followed by large volume injection and capillary gas chromatography coupled to mass spectrometry combined with retention time locking libraries (SPE-LVI-GC-MS-RTL). Characterization of the proposed methodology (SPE-LVI-GC-MS) for selected classes of EDCs enabled high reproducibility and robustness at the ultratrace level. The RTL databases used allowed hundreds of non-target semivolatiles (i.e., pesticides, polycyclic aromatic hydrocarbons, polychlorinated biphenyls and other classes of suspected EDCs from a great number of unknown environmental matrices) to be simultaneously screened for in an easy, fast and remarkable manner. The application of the proposed methodology to real environmental samples demonstrated its remarkable selectivity and sensitivity at the ultratrace level. Screening assessments performed on water and sediment matrices from eight Portuguese estuaries and coastal waters identified EDC "hotspots." These EDCs mainly come from agricultural and a wide variety of industrial sources, and include pesticides and pesticide metabolites, phenolic derivatives and polycyclic aromatic hydrocarbons, which are included in the lists of priority substances published by international environmental agencies. The estuaries that contained relatively high levels of pesticides were Guadiana, Sado and Mondego, while Minho, Douro and Formosa showed enhanced levels of phenolic derivatives. Dibutyltin and tributyltin, selected as target compounds to be monitored by SPE-LVI-GC-MS in the selected ion monitoring mode, were shown to be widespread contaminants at trace levels in almost all of the sediment matrices assessed. The reliability of the proposed methodology undoubtedly makes it a valuable tool that could replace other analytical strategies currently used to screen for EDCs present in the environment at ultratrace levels.

Dioxin emissions from thermal waste management in Medellín, Colombia: present regulation status and preliminary results

Preliminary results of a study undertaken to characterize dioxin and furan releases from waste incineration plants operating in Medellín-Colombia are presented. Emission and fly ash samples were collected from representative plants burning medical and industrial residues to characterize PCDD/PCDF levels. Analyses were carried out following European standards for stationary gas emissions EN-1948:1996 and US EPA 1613 (fly ashes). Final extracts were analyzed by both high resolution gas chromatography coupled to high resolution mass spectrometry (HRGC-HRMS) and high resolution gas chromatography coupled to ion trap tandem mass spectrometry (HRGC-ITMS/MS). Preliminary results revealed emission levels of 1-30.3 ng I-TEQ/Nm3 depending on whether or not an air pollution control system (APCS) was installed. Fly ashes contained 8.5-68 ng I-TEQ/g. Critical issues that should be addressed in an assessment and in developing waste management plans in Colombia are discussed.

Prediction of measurement uncertainty in isotope dilution gas chromatography/mass spectrometry

An equation is theoretically derived which describes the relative standard deviation (RSD) of the amount ratios of analyte to its isotope-labeled variant in gas chromatography/mass spectrometry (GC/MS) using the stable isotope dilution method. The determination of methyltestosterone is taken as an example. The uncertainty equation proposed is justified by comparing the theoretical RSD values with the experimental RSD values obtained by replication over a wide range of analyte amount. The detection limit and quantitation limit are estimated from the continuous plot (precision profile) of the theoretical RSD against analyte amount.

Analysis of polycyclic aromatic hydrocarbons (PAHs) in environmental samples: a critical review of gas chromatographic (GC) methods

Polycyclic aromatic hydrocarbons (PAHs) are frequently measured in the atmosphere for air quality assessment, in biological tissues for health-effects monitoring, in sediments and mollusks for environmental monitoring, and in foodstuffs for safety reasons. In contemporary analysis of these complex matrices, gas chromatography (GC), rather than liquid chromatography (LC), is often the preferred approach for separation, identification, and quantification of PAHs, largely because GC generally affords greater selectivity, resolution, and sensitivity than LC. This article reviews modern-day GC and state-of-the-art GC techniques used for the determination of PAHs in environmental samples. Standard test methods are discussed. GC separations of PAHs on a variety of capillary columns are examined, and the properties and uses of selected mass spectrometric (MS) techniques are presented. PAH literature on GC with MS techniques, including chemical ionization, ion-trap MS, time-of-flight MS (TOF-MS), and isotope-ratio mass spectrometry (IRMS), is reviewed. Enhancements to GC, for example large-volume injection, thermal desorption, fast GC, and coupling of GC to LC, are also discussed with regard to the determination of PAHs in an effort to demonstrate the vigor and robustness GC continues to achieve in the analytical sciences.

Chlorinated paraffins: a review of analysis and environmental occurrence

Chlorinated paraffins (CPs), as technical mixtures of polychlorinated alkanes (PCAs), are ubiquitous in the environment. CPs tend to behave in a similar way to persistent organic pollutants (POPs), leading several countries to impose regulations on the use of CPs. In this article, we review the literature on the properties of CPs, the current analytical tools available to determine CPs in various types of environmental matrices, and concentrations found in the environment. In particular, concentrations of CPs in environmental compartments including air, water, sediments, biota, human food products and human tissues are summarized. Priorities for future research are: improvements in analytical methodologies (reducing the complexity of the analysis, producing reference materials and performing interlaboratory studies); determining background levels of chlorinated paraffins in the environment and human populations (this question should be answered using quality assured analytical tools allowing the intercomparison of data); and investigating the sources of CPs to the environment and to humans.

Determination of complex mixtures of volatile organic compounds in ambient air: an overview

This article reviews developments in the sampling and analysis of volatile organic compounds (VOCs) in ambient air since the 1970s, particularly in the field of environmental monitoring. Global monitoring of biogenic and anthropogenic VOC emissions is briefly described. Approaches used for environmental monitoring of VOCs and industrial hygiene VOC exposure assessments are compared. The historical development of the sampling and analytical methods used is discussed, and the relative advantages and disadvantages of sorbent and canister methods are identified. Overall, there is considerable variability in the reliability of VOC estimates and inventories. In general, canister methods provide superior precision and accuracy and are particulary useful for the analysis of complex mixtures of VOCs. Details of canister methods are reviewed in a companion paper.

Polychlorinated dibenzo-p-dioxins, dibenzofurans and 'dioxin-like' PCBs in flue gas emissions from municipal waste management plants

The aim of this work is to give representative data on polychlorinated dibenzo-p-dioxins (PCDD), polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyl (PCBs) from stack gas emissions of an urban solid waste management plant which has to comply with the limit of 0.1 ng I-TEQ/Nm3. In particular, the study is focused on 29 target compounds, the seventeen 2,3,7,8-PCDDs/Fs, four non-ortho PCBs and eight mono-ortho PCBs which configure so-called 'dioxin-like' PCBs (DL-PCBs). To this end, emission measurements were performed during one year over the three operating combustion lines in a selected waste management plant. In general, accurate methodology allowed characterizing all target compounds in almost all the samples analyzed. In addition, a typical pattern for DL-PCBs is reported. The pattern presented PCB #118 to be the highest, nevertheless the figures demonstrated DL-PCBs contribution to the total TEQ around 3% being PCB #126 the most important congener due to its TEF of 0.1. Finally, remarkable differences were achieved in comparison with both environmental and biological samples such as soils, sediments, human milk or fish since these matrices may present DL-PCB contribution to the total TEQ up to 77%.

Comparison of different mass spectrometric detection techniques in the gas chromatographic analysis of pyrethroid insecticide residues in soil after microwave-assisted extraction

A comparative study was carried out for the simultaneous determination of 11 pyrethroid insecticides in soil by gas chromatography (GC)--ion trap (IT)--mass spectrometry (MS), by means of two different ionization modes; electron impact and negative chemical ionization and three data acquisition procedures; full scan, selected ion monitoring and MS/MS. Pyrethroids investigated were tetramethrin, bifenthrin, phenothrin, lambda-cyhalothrin, permethrin, cyfluthrin, cypermethrin, flucythrinate, esfenvalerate, fluvalinate and deltamethrin. Soil samples were treated with toluene/water by microwave-assisted extraction for 9 min at 700 W and a cleaning up with florisil was performed. Clean soil samples were spiked with pyrethroids at a spiking level of 10, 25 and 50 ng/g. The method employed provides a concentration factor of 10. The ionization gas employed in the negative chemical ionization mode was methane. The use of MS/MS acquisition, in electron impact ionization, provided the best results, due to its high selectivity and sensitivity, giving very low limits of detection from 0.08 to 0.54 ng/g. In negative chemical ionization full scan and selected ion monitoring methods detection limits from 0.12 to 1.40 ng/g were found. The proposed methods were applied to several levels from 10 to 50 ng/g of spiked soils, being electron impact MS/MS method which minimizes matrix spectrum interferences and provided recovery average values from 84% to 120% with relative standard deviations which varied from 3.2 to 7.2%.

Development and validation of a sensitive GC–MS method for the determination of trace levels of an alkylating reagent in a β-lactam active pharmaceutical ingredient

A direct injection gas chromatographic method utilizing selected-ion monitoring (SIM) mode mass selective detection was developed and validated for the trace analysis of an impurity, carbonic acid chloromethyl tetrahydro-pyran-4-yl ester (CCMTHP), present in a beta-lactam active pharmaceutical ingredient (API). A variety of analytical techniques including LC-MS, GC-FID, GC-ECD and GC-MS were evaluated during the method development. GC-MS with SIM at m/z=49 demonstrated the best detection sensitivity. A 10 ppm (5 pg on column) limit of quantitation (LOQ) was attained and the linearity of the method was demonstrated in the range of 10-1000 ppm. Accurate and precise quantitation of the impurity in drug substance was achieved with external standardization. A 10:1 split injection was applied to limit the amount of non-volatile API loading onto the column. The effects of injection and detection parameters such as split ratio, liner type, injection temperature and number of mass ions monitored were studied. Full validation proved the accuracy, precision and specificity of the method, which was successfully employed to analyze many pilot lots of the API.

Computerized separation of chromatographically unresolved peaks

A computerized peak deconvolution software and mass spectra were successfully applied for the deconvolution of overlapped peak cluster in the chromatogram obtained separating the complex mixture of pesticides by retention time locking gas chromatography-mass spectroscopy. The method based on the unique fragment ions in the spectra can be used for deconvolution of peak clusters if mass spectra of overlapped peaks differ. This method allows determining actual retention times of overlapped peaks. Peak areas found by this method however, cannot be used naturally for the quantitative purposes as the abundance of fragment ions used for this deconvolution procedure can dramatically differ. Computer assisted deconvolution of peaks in the peak clusters gives more realistic peak area ratios as at this method it is supposed equal response for all peaks overlapped in a cluster.

Challenges of gas chromatography-high-resolution time-of-flight mass spectrometry for simultaneous analysis of polybrominated diphenyl ethers and other halogenated persistent organic pollutants in environmental samples

The potential of a gas chromatographic method employing high-resolution time-of-flight (TOF) mass spectrometry was evaluated for detection of polybrominated diphenyl ethers (PBDEs) in the environmental matrices represented by fish and river sediment. Two ionisation techniques, viz. electron ionisation (EI) and negative ion chemical ionisation (NICI), the latter with methane as a reagent gas, were used in this study. While the instrumental lowest calibration levels (LCLs) obtained in El were in the range from 1 to 5 pg, their values ranged between 10 to 250 fg in NICI mode. This enhancement in detectability of target analytes enabled identification/quantification of even minor PBDE congeners, and consequently, improved characterisation of particular sample contamination patterns. In addition, this method allowed estimation of the PCB levels in examined samples. CB 153 was used as a contamination marker in this study.

Recent advances in mass spectrometric measurement of dioxins

Past years, many efforts have been dedicated to the development of alternative analytical methods for the measurement of dioxins in various types of matrices. Polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and polychlorinated biphenyls (PCBs) are compounds that are present in samples at part-per-billion (ppb) or part-per-trillion (ppt) level. Their measurement requires the use of very sensitive analytical methods. Gas chromatography (GC) coupled to quadrupole ion storage mass spectrometry (QISTMS), fast GC (FGC) coupled to time-of-flight mass spectrometry (TOFMS) and comprehensive two-dimensional gas chromatography (GC x GC) coupled to TOFMS are the more promising tools challenging the reference GC high resolution mass spectrometry (HRMS) based on sector instruments. We report herein some of the advances we achieved in the past years in our laboratory on the development of alternative measurement methods for those compounds.