Selection of aptamers against live bacterial cells

Aptamer functionalized silver clusters for STED microscopy

Novel STED probe was prepared through aptamer functionalized silver clusters, which preserve specific affinity with smaller size and more photostability.

Selection, identification and application of DNA aptamers for the detection of Bifidobacterium breve

In the present study, a single-stranded DNA (ssDNA) aptamer binding toBifidobacterium brevewith high avidity and selectivity was selected through a whole-bacterium-based SELEX process.

Development of a DNA aptamer that binds specifically to group A Streptococcus serotype M3

Group A streptococcus (GAS) is an important Gram-positive pathogen that causes various human diseases ranging from peripheral lesions to invasive infections. The M protein is one of the main virulence factors present on the cell surface and is associated with invasive GAS infections. Compared with other M types, serotype M3 has a predominant role in lethal infections and demonstrates epidemic behaviors, including streptococcal toxic shock syndrome, bacteremia, and necrotizing fasciitis. Traditional methods for M typing are time-consuming, tedious, contradictory, and generally restricted to reference laboratories. Therefore, development of a new M-typing technique is needed. Aptamers with the ability to detect their target with a high degree of accuracy and specificity can be ideal candidates for specific M-typing of Streptococcus pyogenes. In this study DNA aptamers with a high binding affinity towards S. pyogenes serotype M3 were selected through 12 iterative rounds of the Systematic Evolution of Ligands by EXponential (SELEX) enrichment procedure using live cells as a target. We monitored the progress of the SELEX procedure by flow cytometry analysis. Of several aptamer sequences analyzed, 12L18A showed the highest binding efficiency towards S. pyogenes type M3, with an apparent dissociation constant (K_d) of 7.47 ± 1.72 pmol/L being the lowest. Therefore the isolated aptamer can be used in any tool, such as a biosensor, for the detection of S. pyogenes and can be used in the development of a novel M-typing system.

MIPs and Aptamers for Recognition of Proteins in Biomimetic Sensing

Biomimetic binders and catalysts have been generated in order to substitute the biological pendants in separation techniques and bioanalysis. The two major approaches use either "evolution in the test tube" of nucleotides for the preparation of aptamers or total chemical synthesis for molecularly imprinted polymers (MIPs). The reproducible production of aptamers is a clear advantage, whilst the preparation of MIPs typically leads to a population of polymers with different binding sites. The realization of binding sites in the total bulk of the MIPs results in a higher binding capacity, however, on the expense of the accessibility and exchange rate. Furthermore, the readout of the bound analyte is easier for aptamers since the integration of signal generating labels is well established. On the other hand, the overall negative charge of the nucleotides makes aptamers prone to non-specific adsorption of positively charged constituents of the sample and the "biological" degradation of non-modified aptamers and ionic strength-dependent changes of conformation may be challenging in some application.

Whole-cell detection of live lactobacillus acidophilus on aptamer-decorated porous silicon biosensors

This work describes the design of optical aptamer-based porous silicon (PSi) biosensors for the direct capture of Lactobacillus acidophilus. Aptamers are oligonucleotides (single-stranded DNA or RNA) that can bind their targets with high affinity and specificity, making them excellent recognition elements for biosensing applications. Herein, aptamer Hemag1P, which specifically targets the important probiotic L. acidophilus, was utilized for direct bacteria capture onto oxidized PSi Fabry-Pérot thin films. Monitoring changes in the reflectivity spectrum (using reflective interferometric Fourier transform spectroscopy) allows for bacteria detection in a label-free, simple and rapid manner. The performance of the biosensor was optimized by tuning the PSi nanostructure, its optical properties, as well as the immobilization density of the aptamer. We demonstrate the high selectivity and specificity of this simple "direct-capture" biosensing scheme and show its ability to distinguish between live and dead bacteria. The resulting biosensor presents a robust and rapid method for the specific detection of live L. acidophilus at concentrations relevant for probiotic products and as low as 10(6) cells per mL. Rapid monitoring of probiotic bacteria is crucial for quality, purity and safety control as the use of probiotics in functional foods and pharmaceuticals is becoming increasingly popular.

Sensitive analytical performance of folding based biosensor using methylene blue tagged aptamers

This work demonstrates the development of a folding based electrochemical aptasensor using methylene blue (MB) tagged anti-Ochratoxin A (OTA) aptamers. Different aptamer coupling strategies were tested using Hexamethylenediamine, polyethylene glycol, simple adsorption and diazonium coupling mechanism. The best sensitivity was recorded by oxidation of amines using hexamethylenediamine (HDMA) on screen printed carbon electrode (SPCE). To achieve the direct detection of OTA, aptamer conjugated redox probe was used and detection was demonstrated based on the conformational changes in aptamer structure upon OTA sensing. Signaling in this class of sensors arises from changes in electron transfer efficiency upon target-induced changes in the conformation/flexibility of the aptamer probe. These changes can be readily recorded electrochemically. The developed aptasensor is unique in its own mechanism as redox probe tagged aptamer coupling such as MB has never been tried to immobilize using long carbon chain spacers as, addition of spacers would provide more sensitive detection methods. A good dynamic range 0.01-5ng/ml was obtained for OTA with Limit of detection (LOD) 0.01ng/ml and Limit of quantification (LOQ) of 0.03ng/ml respectively. The good reproducibility was recorded with RSD% of 3.75. The obtained straight line equation was y=0.4035x+0.90311, r=0.9976. We believe that the sensor design guidelines outlined here represents a general strategy for developing new folding-based electrochemical aptasensors. The developed aptasensor was extended to screen cocoa samples for OTA contamination. The cocoa samples were extracted and purified using molecular imprinted polymer (MIP) columns. The aptasensor displayed good recovery values in the range 84-85% thus, exhibited the effectiveness of proposed aptasensor for such complex matrices.

Aptamer-based 'point-of-care testing'

Aptamers are single-stranded oligonucleotides that can be artificially generated by a method called Systematic evolution of ligands by exponential enrichment (SELEX). The generated aptamers have been assessed for high-performance sensing applications due to their appealing characteristics. With either aptamers alone or complementing with antibodies, several high sensitive and portable sensors have been demonstrated for use in 'point-of-care testing'. Due to their high suitability and flexibility, aptamers are conjugated with nanostructures and utilized in field applications. Moreover, aptamers are more amenable to chemical modifications, making them capable of utilization with most developed sensors. In this overview, we discuss novel, portable, and aptamer-based sensing strategies that are suitable for 'point-of-care testing'.

The application of capillary electrophoresis for assisting whole-cell aptamers selection by characterizing complete ssDNA distribution

Whole-cell SELEX faces more difficulties than SELEX against purified molecules target. In this work, we demonstrate the application of capillary electrophoresis for assisting whole-cell aptamers selection by characterizing complete ssDNA distribution. We chose three cancer cell lines U251, Hela and PC3 as target, FAM labeled Sgc8c (a 41mer aptamer) and FAM labeled 41mer random ssDNA library as ssDNA model. CE conditions of running buffer and capillary length and inner diameter as well as UV and LIF detection were optimized. The distribution percentage of Sgc8c and ssDNA library against U251, Hela and PC3 was demonstrated, the relative peak area of their complex is 8.94%, 1.05% and 0.44% for Sgc8c and 9.03%, 1.04% and 0.12% for ssDNA library respectively. Under the chosen experimental conditions, binding ability comparison of three cell lines was U251>Hela>PC3, which was validated by laser confocol microscope. For each cell, distribution percentage of ssDNA library was compared with that of Sgc8c. Finally, whole-cell complex of U251-Sgc8c was confirmed by increase incubation time and fraction CE analysis.

An improved SELEX technique for selection of DNA aptamers binding to M-type 11 of Streptococcus pyogenes

Streptococcus pyogenes is a clinically important pathogen consisting of various serotypes determined by different M proteins expressed on the cell surface. The M type is therefore a useful marker to monitor the spread of invasive S. pyogenes in a population. Serotyping and nucleic acid amplification/sequencing methods for the identification of M types are laborious, inconsistent, and usually confined to reference laboratories. The primary objective of this work is to develop a technique that enables generation of aptamers binding to specific M-types of S. pyogenes. We describe here an in vitro technique that directly used live bacterial cells and the Systematic Evolution of Ligands by Exponential Enrichment (SELEX) strategy. Live S. pyogenes cells were incubated with DNA libraries consisting of 40-nucleotides randomized sequences. Those sequences that bound to the cells were separated, amplified using polymerase chain reaction (PCR), purified using gel electrophoresis, and served as the input DNA pool for the next round of SELEX selection. A specially designed forward primer containing extended polyA20/5Sp9 facilitated gel electrophoresis purification of ssDNA after PCR amplification. A counter-selection step using non-target cells was introduced to improve selectivity. DNA libraries of different starting sequence diversity (10(16) and 10(14)) were compared. Aptamer pools from each round of selection were tested for their binding to the target and non-target cells using flow cytometry. Selected aptamer pools were then cloned and sequenced. Individual aptamer sequences were screened on the basis of their binding to the 10 M-types that were used as targets. Aptamer pools obtained from SELEX rounds 5-8 showed high affinity to the target S. pyogenes cells. Tests against non-target Streptococcus bovis, Streptococcus pneumoniae, and Enterococcus species demonstrated selectivity of these aptamers for binding to S. pyogenes. Several aptamer sequences were found to bind preferentially to the M11 M-type of S. pyogenes. Estimated binding dissociation constants (Kd) were in the low nanomolar range for the M11 specific sequences; for example, sequence E-CA20 had a Kd of 7±1 nM. These affinities are comparable to those of a monoclonal antibody. The improved bacterial cell-SELEX technique is successful in generating aptamers selective for S. pyogenes and some of its M-types. These aptamers are potentially useful for detecting S. pyogenes, achieving binding profiles of the various M-types, and developing new M-typing technologies for non-specialized laboratories or point-of-care testing.

Optical Sensing of Microbial Life on Surfaces

The label-free detection of microbial cells attached to a surface is an active field of research. The field is driven by the need to understand and control the growth of biofilms in a number of applications, including basic research in natural environments, industrial facilities, and clinical devices, to name a few. Despite significant progress in the ability to monitor the growth of biofilms and related living cells, the sensitivity and selectivity of such sensors are still a challenge. We believe that among the many different technologies available for monitoring biofilm growth, optical techniques are the most promising, as they afford direct imaging and offer high sensitivity and specificity. Furthermore, as each technique offers different insights into the biofilm growth mechanism, our analysis allows us to provide an overview of the biological processes at play. In addition, we use a set of key parameters to compare state-of-the-art techniques in the field, including a critical assessment of each method, to identify the most promising types of sensors. We highlight the challenges that need to be overcome to improve the characteristics of current biofilm sensor technologies and indicate where further developments are required. In addition, we provide guidelines for selecting a suitable sensor for detecting microbial cells on a surface.

The Effects of SELEX Conditions on the Resultant Aptamer Pools in the Selection of Aptamers Binding to Bacterial Cells

Aptamers of high affinity and specificity have a wide range of analytic and clinical applications. Selection of DNA or RNA aptamer molecules usually involves systematic evolution of ligands via exponential enrichment (SELEX), in which a random DNA or RNA library is incubated with a target molecule, and the oligonucleotides that bind the target are then separated from the nonbinders, PCR amplified, and used as refined libraries in the next round of selection. Conventional SELEX methodologies require the use of purified target molecules and their immobilization onto a solid support. However, purified targets from cells are not always available, and fixing the target to a support may alter its conformation. To overcome these problems, we have developed a SELEX technique using live bacterial cells in suspension as targets, for selecting DNA aptamers specific to cell-surface molecules. Through the selection of aptamers binding to Lactobacillus acidophilus and Streptococcus pyogenes, we report here optimization of this technique and show how varying selection conditions impact the characteristics of resultant aptamer pools, including the binding affinity, selectivity, and the secondary structures. We found that the use of larger starting library sequence diversity, gel purification of the subsequent pools, and the introduction of counter-selection resulted in a more efficient SELEX process and more selective aptamers. A SELEX protocol with lower starting sequence diversity, the use of heat denaturation, and the absence of counter-selection still resulted in high-affinity aptamer sequences specific to the target cell types; however, the SELEX process was inefficient, requiring 20 rounds, and the aptamers were not specific to the strain of the bacterial cells. Strikingly, two different SELEX methodologies yielded the same sequence that bound strongly to the target S. pyogenes cells, suggesting the robustness of the bacterial cell-SELEX technique.

Aptamers against pathogenic microorganisms

An important current issue of modern molecular medicine and biotechnology is the search for new approaches to early diagnostic assays and adequate therapy of infectious diseases. One of the promising solutions to this problem might be a development of nucleic acid aptamers capable of interacting specifically with bacteria, protozoa, and viruses. Such aptamers can be used for the specific recognition of infectious agents as well as for blocking of their functions. The present review summarizes various modern SELEX techniques used in this field, and of several currently identified aptamers against viral particles and unicellular organisms, and their applications. The prospects of applying nucleic acid aptamers for the development of novel detection systems and antibacterial and antiviral drugs are discussed.

Taking Advantage of Electric Field Induced Bacterial Aggregation for the Study of Interactions between Bacteria and Macromolecules by Capillary Electrophoresis

The quantification of interaction stoichiometry and binding constant between bacteria (or other microorganism) and (macro)molecules remains a challenging issue for which only a few adapted methods are available. In this paper, a new methodology was developed for the determination of the interaction stoichiometry and binding constant between bacteria and (macro)molecules. The originality of this work is to take advantage of the bacterial aggregation phenomenon to directly quantify the free ligand concentration in equilibrated bacteria-ligand mixtures using frontal analysis continuous capillary electrophoresis. The described methodology does not require any sample preparation such as filtration step or centrifugation. It was applied to the study of interactions between Erwinia carotovora and different generations of dendrigraft poly-L-lysines leading to quantitative information (i.e., stoichiometry and binding site constant). High stoichiometries in the order of 10(6)-10(7) were determined between nanometric dendrimer-like ligands and the rod-shaped micrometric bacteria. The effect of the dendrimer generation on the binding constant and the stoichiometry is discussed. Stoichiometries were compared with those obtained by replacing the bacteria by polystyrene microbeads to demonstrate the internalization of the ligands inside the bacteria and the increase of the specific surface via the formation of vesicles.

Selection of HBsAg-Specific DNA Aptamers Based on Carboxylated Magnetic Nanoparticles and Their Application in the Rapid and Simple Detection of Hepatitis B Virus Infection

Aptamers are short single-stranded DNA or RNA oligonucleotides and can be selected from synthetic combinatorial libraries in vitro. They have a high binding affinity and specificity for their targets. Agarose gels, nitrocellulose membranes, and adsorptive microplates are often used as carriers to immobilize targets in the SELEX (systematic evolution of ligands by exponential enrichment) process, but the subsequent separation step is tedious and time-consuming. Therefore, we used magnetic nanoparticles (MNPs) as carriers to immobilize the target, hepatitis B surface antigen (HBsAg), which is convenient for fast magnetic separation. In this study, we first selected DNA aptamers against HBsAg by immobilizing HBsAg on the surface of carboxylated MNPs. The ssDNA library of each selection round was prepared by asymmetric PCR amplification for the next selection round. To obtain aptamer sequences, the final selected products were purified by gel electrophoresis, then cloned, and sequenced. DNA aptamers that specifically bind to HBsAg were successfully obtained after 13 selection rounds. The selected aptamers were used to construct a chemiluminescence aptasensor based on magnetic separation and immunoassay to detect HBsAg from pure protein or actual serum samples. There was a linear relationship between HBsAg concentration and chemiluminescent intensity in the range of 1-200 ng/mL. The aptasensor worked well even in the presence of interfering substances and was highly specific in the detection of HBsAg in serum samples, with a detection limit 0.1 ng/mL lower than the 0.5 ng/mL limit of an ELISA in use at the hospital. This aptasensor can contribute to better detection of hepatitis B virus infection.

Aptamers: new arrows to target dendritic cells

Aptamers, as a novel class of molecular probes for diagnosis, imaging and targeting therapy, have attracted increasing attention in recent years. Aptamers are generated from libraries of single-stranded nucleic acids against different molecules via the "systematic evolution of ligands by exponential enrichment" (SELEX) method. SELEX is a repetitive process of a sequential selection procedure in which a DNA or RNA library pool is incubated separately with target and control molecules to select specific oligonucleotide aptamers with high affinities and specificities. Cell-SELEX is a modified version of the SELEX process in which whole living cells are used as targets for the aptamers. Dendritic cell (DC) targeting, as a new therapeutic approach, can improve the efficiency of immunotherapy in the treatment of allergies and cancers. DCs use various receptors to continuously induce adaptive immunity via capture and presentation of antigens to naïve T cells. DCs are considered as the best targets in modulating immune responses against cancer, autoimmunity, allergy and transplantation. Aptamers, as a new agent, can be applied in DC targeting. The purpose of this review is to present some general concepts of aptamer production and DC targeting by aptamer molecules.

Comparison of whole-cell SELEX methods for the identification of Staphylococcus aureus-specific DNA aptamers

Whole-cell Systemic Evolution of Ligands by Exponential enrichment (SELEX) is the process by which aptamers specific to target cells are developed. Aptamers selected by whole-cell SELEX have high affinity and specificity for bacterial surface molecules and live bacterial targets. To identify DNA aptamers specific to Staphylococcus aureus, we applied our rapid whole-cell SELEX method to a single-stranded ssDNA library. To improve the specificity and selectivity of the aptamers, we designed, selected, and developed two categories of aptamers that were selected by two kinds of whole-cell SELEX, by mixing and combining FACS analysis and a counter-SELEX process. Using this approach, we have developed a biosensor system that employs a high affinity aptamer for detection of target bacteria. FAM-labeled aptamer sequences with high binding to S. aureus, as determined by fluorescence spectroscopic analysis, were identified, and aptamer A14, selected by the basic whole-cell SELEX using a once-off FACS analysis, and which had a high binding affinity and specificity, was chosen. The binding assay was evaluated using FACS analysis. Our study demonstrated the development of a set of whole-cell SELEX derived aptamers specific to S. aureus; this approach can be used in the identification of other bacteria.

Analytical bioconjugates, aptamers, enable specific quantitative detection of Listeria monocytogenes

As a major human pathogen in the Listeria genus, Listeria monocytogenes causes the bacterial disease listeriosis, which is a serious infection caused by eating food contaminated with the bacteria. We have developed an aptamer-based sandwich assay (ABSA) platform that demonstrates a promising potential for use in pathogen detection using aptamers as analytical bioconjugates. The whole-bacteria SELEX (WB-SELEX) strategy was adopted to generate aptamers with high affinity and specificity against live L. monocytogenes. Of the 35 aptamer candidates tested, LMCA2 and LMCA26 reacted to L. monocytogenes with high binding, and were consequently chosen as sensing probes. The ABSA platform can significantly enhance the sensitivity by employing a very specific aptamer pair for the sandwich complex. The ABSA platform exhibited a linear response over a wide concentration range of L. monocytogenes from 20 to 2×10(6) CFU per mL and was closely correlated with the following relationship: y=9533.3x+1542.3 (R(2)=0.99). Our proposed ABSA platform also provided excellent specificity for the tests to distinguish L. monocytogenes from other Listeria species and other bacterial genera (3 Listeria spp., 4 Salmonella spp., 2 Vibrio spp., 3 Escherichia coli and 3 Shigella spp.). Improvements in the sensitivity and specificity have not only facilitated the reliable detection of L. monocytogenes at extremely low concentrations, but also allowed for the development of a 96-well plate-based routine assay platform for multivalent diagnostics.

Ultrasensitive electrochemiluminescence aptasensor based on a graphene/polyaniline composite film modified electrode and CdS quantum dot coated platinum nanostructured networks as labels

A simple electrochemiluminescence (ECL) aptasensor for adenosine triphosphate (ATP) based on graphene/polyaniline (GR/PANI) composite films modified glassy carbon electrode (GCE) was successfully fabricated.

Development of a fluorescent enzyme-linked DNA aptamer-magnetic bead sandwich assay and portable fluorometer for sensitive and rapid listeria detection

A fluorescent DNA aptamer-magnetic bead sandwich assay was developed to detect listeriolysin O (LLO) protein from pathogenic Listeria bacteria using a peroxidase-linked system, Amplex Ultra Red (AUR; derivatized resazurin) substrate, and a custom-designed handheld fluorometer. The assay is highly sensitive with demonstrated limits of detection (LODs) in the range of 4 to 61 L. monocytogenes cells or the equivalent LLO produced by 4 to 61 cells on average in separate titration trials. Total assay processing and analysis time was approximately 30 mins. The assay has demonstrated the ability to detect 6 species of Listeria as desired by the USDA's Food Safety Inspection Service (FSIS). The portable system was designed to be used primarily with surface swab samples from fomites, but it can also be used to assess enrichment cultures. The minimal time to detect a positive enrichment culture in our hands from an initial 10 cell inoculum in 200 ml of broth has been 8 h post-incubation at 37 °C in shaker flask cultures. An optional automated magnetic bead assay processing and wash device capable of simultaneously processing 6 samples with low and consistent fluorescence background for higher volume central laboratories is also described.

Cell-specific aptamers and their conjugation with nanomaterials for targeted drug delivery

INTRODUCTION

Aptamers are short, single-stranded DNA or RNA sequences that can fold into complex secondary and tertiary structures and bind to various target molecules with high affinity and specificity. These properties, as well as rapid tissue penetration and ease of chemical modification, make aptamers ideal recognition elements for in vivo targeted drug delivery and attractive molecules for use in disease diagnosis and therapy.

AREAS COVERED

The general properties of aptamers as well as advantages over their counterpart antibodies are briefly discussed. Next, aptamer selection by cell- systematic evolution of ligands by exponential enrichment is described in detail. Finally, the review summarizes recent progress in the field of targeted drug delivery based on aptamers and their conjugation to liposomes, micelles and other nanomaterials.

EXPERT OPINION

Advances in nanotechnology have led to new and improved nanomaterials for biomedical applications. Conjugation of nanoparticles (NPs) with aptamers exploits both technologies, making aptamer-NP conjugates ideal agents for drug delivery with proven therapeutic effects and the reduction of toxicity to normal tissue. The use of multivalent aptamer-conjugated nanomaterials represents one of the new directions for drug development in the future; as such, continuing studies of these multivalent aptamers and bioconjugates should result in important clinical applications in targeted drug delivery.

Aptamer-functionalized localized surface plasmon resonance sensor for the multiplexed detection of different bacterial species

A localized surface plasmon resonance (LSPR)-based sensor with an immobilized aptamer ligand was developed and used for the label-free and accurate detection of bacteria through observing the changes in the peak extinction intensity. The ability of this biosensor to recognize pathogenic bacteria was analyzed and conditions were optimized with different probe concentrations, incubation time for aptamer immobilization, and incubation time for cell binding. A single LSPR-based sensor was used to successfully detect and identify three different bacterial species as proof-of-concept experiments; in all cases, the sensor showed a detection limit of 30 cfu per assay. Furthermore, the sensor system could clearly identify various target bacterial species in a multiplexed mode with high specificities on a single chip. The label-free bacteria sensor developed by combining LSPR and aptamers will be useful for diagnosing various infectious diseases through a single convenient assay.

A novel aptamer-based competition strategy for ultrasensitive electrochemical detection of leukemia cells

A robust, nanobiotechnology-based electrochemical cytosensing platform for the detection of acute leukemia cells was developed with high sensitivity, selectivity, acceptable rapidity and excellent extensibility. It utilized the competitive binding of cell-specific aptamers to acute leukemia cells and subsequent voltammetric quantification of the metal signature. Greatly enhanced sensitivity was achieved with dual signal amplification by using Fe3O4 magnetic nanoparticles (MNPs) as carriers to load a large amount of gold nanoparticles (AuNPs) and AuNP-catalyzed silver deposition. The proposed competitive cytosensor showed high sensitivity with a detection limit down to 10 cells. This simple and low-cost electrochemical cytosensing approach offers great promise to extend its application to early detection of human leukemia and possibly to other cancer cells.

A simple method for eliminating fixed-region interference of aptamer binding during SELEX

Standard libraries for systematic evolution of ligands by exponential enrichment (SELEX) typically utilize flanking regions that facilitate amplification of aptamers recovered from each selection round. Here, we show that these flanking sequences can bias the selection process, due in part to their ability to interfere with the fold or function of aptamers localized within the random region of the library sequence. We then address this problem by investigating the use of complementary oligonucleotides as a means to block aptamer interference by each flanking region. Isothermal titration calorimetry (ITC) studies are combined with fold predictions to both define the various interference mechanisms and assess the ability of added complementary oligonucleotides to ameliorate them. The proposed blocking strategy is thereby refined and then applied to standard library forms of benchmark aptamers against human α-thrombin, streptavidin, and vascular endothelial growth factor (VEGF). In each case, ITC data show that the new method effectively removes fixed-region mediated interference effects so that the natural binding affinity of the benchmark aptamer is completely restored. We further show that the binding affinities of properly functioning aptamers within a selection library are not affected by the blocking protocol, and that the method can be applied to various common library formats comprised of different flanking region sequences. Finally, we present a rapid and inexpensive qPCR-based method for determining the mean binding affinity of retained aptamer pools and use it to show that introduction of the pre-blocking method into the standard SELEX protocol results in retention of high-affinity aptamers that would otherwise be lost during the first round of selection. Significant enrichment of the available pool of high-affinity aptamers is thereby achieved in the first few rounds of selection. By eliminating single-strand (aptamer-like) structures within or involving the fixed regions, the technique is therefore shown to isolate aptamer sequence and function within the desired random region of the library members, and thereby provide a new selection method that is complementary to other available SELEX protocols.

A universal fluorescent aptasensor based on AccuBlue dye for the detection of pathogenic bacteria

We report a universal fluorescent aptasensor based on the AccuBlue dye, which is impermeant to cell membranes, for the detection of pathogenic bacteria. The sensor consists of AccuBlue, an aptamer strand, and its complementary strand (cDNA) that partially hybridizes to the aptamer strand. We have fabricated two models by changing the sequence of the reaction between the elements in the system. One is the "signal on" model in which the aptamer is first bound to the target, followed by the addition of cDNA and AccuBlue, at which time the cDNA hybridizes with the free unreacted aptamer and forms a double-stranded DNA (dsDNA) duplex. Such hybridization causes AccuBlue to insert into the dsDNA and exhibit significantly increased fluorescence intensity because of the specific intercalation of the AccuBlue into dsDNA rather than single-stranded DNA (ssDNA). The other model, "signal off," involves hybridization of the aptamer with cDNA first, resulting in high fluorescence intensity on the addition of AccuBlue. When the target is added, the aptamer binds the target, causing the cDNA to detach from the dsDNA duplex and resulting in low fluorescence as a result of the liberation of AccuBlue. Because this design is based purely on DNA hybridization, and AccuBlue is impermeant to cell membranes, it could potentially be adapted to a wide variety of analytes.

Recent trends in SELEX technique and its application to food safety monitoring

The method referred to as "systemic evolution of ligands by exponential enrichment" (SELEX) was introduced in 1990 and ever since has become an important tool for the identification and screening of aptamers. Such nucleic acids can recognize and bind to their corresponding targets (analytes) with high selectivity and affinity, and aptamers therefore have become attractive alternatives to traditional antibodies not the least because they are much more stable. Meanwhile, they have found numerous applications in different fields including food quality and safety monitoring. This review first gives an introduction into the selection process and to the evolution of SELEX, then covers applications of aptamers in the surveillance of food safety (with subsections on absorptiometric, electrochemical, fluorescent and other methods), and then gives conclusions and perspectives. The SELEX method excels by its features of in vitro, high throughput and ease of operation. This review contains 86 references.

Enhancing the analytical performance of electrochemical RNA aptamer-based sensors for sensitive detection of aminoglycoside antibiotics

Folding-based electrochemical sensors utilizing structure-switching aptamers are specific, selective, sensitive, and widely applicable to the detection of a variety of target analytes. The specificity is achieved by the binding properties of an electrode-bound RNA or DNA aptamer biorecognition element. Signaling in this class of sensors arises from changes in electron transfer efficiency upon target-induced changes in the conformation/flexibility of the aptamer probe. These changes can be readily monitored electrochemically. Because of this signaling mechanism, there are several approaches to maximizing the analytical attributes (i.e., sensitivity, limit of detection, and observed binding affinity) of the aptamer sensor. Here, we present a systematic study of several approaches, including electrochemical interrogation parameters and biomolecular engineering of the aptamer sequence, to develop a sensor for the detection of aminoglycoside antibiotics. Specifically, through a combination of optimizing the electrochemical signal and engineering the parent 26-nucleotide RNA aptamer sequence to undergo larger conformation changes, we develop several improved sensors. These sensors exhibit binding affinities ranging from 220 nM to 42 μM, as much as a 100-fold improved limit of detection in comparison to previously reported sensors, and a variety of linear ranges including the therapeutic window for tobramycin. These data demonstrate that rational engineering of the aptamer structure to create large conformation changes upon target binding leads to improved sensor performance. We believe that the sensor design guidelines outlined here represent a general strategy for developing new aptamer folding-based electrochemical sensors.

Label-free and turn-on aptamer strategy for cancer cells detection based on a DNA-silver nanocluster fluorescence upon recognition-induced hybridization

We present here a label-free and turn-on aptamer strategy for cancer cell detection based on the recognition-induced conformation alteration of aptamer and hybridization-induced fluorescence enhancement effect of DNA-silver nanoclusters (DNA-Ag NCs) in proximity of guanine-rich DNA sequences. In this strategy, two tailored DNA probes were involved. One is designed as a hairpin-shaped structure consisting of a target specific aptamer sequence at the 3'-end, a guanine-rich DNA sequence, and an arm segment at the 5'-end (denote as recognition probe). The other, serving as a signal probe, contains a sequence for Ag NCs templated synthesis and a link sequence complementary to the arm segment of the recognition probe. Recognizing and binding of the aptamer to cancer cells enforces the recognition probe to undergo a conformational alteration and then initiates hybridization between the arm segment of the recognition probe and the link sequence of the signal probe. The Ag NCs are then close to the guanine-rich DNA, leading to an enhanced fluorescence readout. As proof-of-concept, the CCRF-CEM cancer cell detection were performed by using the specific aptamer, sgc8c. It was demonstrated that this strategy could specially image the CCRF-CEM cells. Determination by flow cytometry allowed for detection of as low as 150 CCRF-CEM cells in 200 μL binding buffer. The general applicability of the strategy is also achieved in the successful detection of Ramos cells. These results implied that this strategy holds considerable potential for simple, sensitive, universal, and specific cancer cell detection with no required washing and separation steps.

A PDMS/paper/glass hybrid microfluidic biochip integrated with aptamer-functionalized graphene oxide nano-biosensors for one-step multiplexed pathogen detection

Infectious pathogens often cause serious public health concerns throughout the world. There is an increasing demand for simple, rapid and sensitive approaches for multiplexed pathogen detection. In this paper we have developed a polydimethylsiloxane (PDMS)/paper/glass hybrid microfluidic system integrated with aptamer-functionalized graphene oxide (GO) nano-biosensors for simple, one-step, multiplexed pathogen detection. The paper substrate used in this hybrid microfluidic system facilitated the integration of aptamer biosensors on the microfluidic biochip, and avoided complicated surface treatment and aptamer probe immobilization in a PDMS or glass-only microfluidic system. Lactobacillus acidophilus was used as a bacterium model to develop the microfluidic platform with a detection limit of 11.0 cfu mL(-1). We have also successfully extended this method to the simultaneous detection of two infectious pathogens - Staphylococcus aureus and Salmonella enterica. This method is simple and fast. The one-step 'turn on' pathogen assay in a ready-to-use microfluidic device only takes ~10 min to complete on the biochip. Furthermore, this microfluidic device has great potential in rapid detection of a wide variety of different other bacterial and viral pathogens.

Identification of Salmonella Typhimurium-specific DNA aptamers developed using whole-cell SELEX and FACS analysis

Conventional methods for detection of infective organisms, such as Salmonella, are complicated and require multiple steps, and the need for rapid detection has increased. Biosensors show great potential for rapid detection of pathogens. In turn, aptamers have great potential for biosensor assay development, given their small size, ease of synthesis and labeling, lack of immunogenicity, a lower cost of production than antibodies, and high target specificity. In this study, ssDNA aptamers specific to Salmonella Typhimurium were obtained by a whole bacterium-based systematic evolution of ligands by exponential enrichment (SELEX) procedure and applied to probing S. Typhimurium. After 10 rounds of selection with S. Typhimurium as the target and Salmonella Enteritidis, Escherichia coli and Staphylococcus aureus as counter targets, the highly enriched oligonucleic acid pool was sorted using flow cytometry. In total, 12 aptamer candidates from different families were sequenced and grouped. Fluorescent analysis demonstrated that aptamer C4 had particularly high binding affinity and selectivity; this aptamer was then further characterized.

Nucleic acid aptamers for capture and detection of Listeria spp

The purpose of this study was to identify biotinylated single-stranded (ss) DNA aptamers with binding specificity to Listeria and use these for capture and subsequent qPCR detection of the organism. For aptamer selection, SELEX (systematic evolution of ligands by exponential enrichment) was applied to a biotin-labeled ssDNA combinatorial library. After multiple rounds of selection and counter-selection, aptamers separated, sequenced, and characterized by flow cytometry showed binding affinities to L. monocytogenes of 18-23%. Although selected for using L. monocytogenes, these aptamers showed similar binding affinity for other members of the Listeria genus and low binding affinity for non-Listeria species. One aptamer, Lbi-17, was chosen for development of a prototype capture and detection assay. When Lbi-17 was conjugated to magnetic beads and used in a combined aptamer magnetic capture (AMC)-qPCR assay, the pathogen could be detected at concentrations <60 CFU/500 μl buffer in the presence of a heterogeneous cocktail of non-Listeria bacterial cells, with a capture efficiency of 26-77%. Parallel experiments using immunomagnetic separation (IMS)-qPCR produced the same detection limit but lower capture efficiency (16-21%). Increasing assay volume to 10 and 50 ml resulted in reduced capture efficiency and higher limits of detection, at 2.7 and 4.8 log₁₀ CFU L. monocytogenes per sample, respectively, for the AMC-qPCR assay. Biotinylated ssDNA aptamers are promising ligands for food-borne pathogen concentration prior to detection using molecular methods.

Aptasensor and genosensor methods for detection of microbes in real world samples

The increasing concerns about food and environmental safety have prompted the desire to develop rapid, specific, robust and highly sensitive methods for the detection of microorganisms to ensure public health. Although traditional microbiological methods are available, they are labor intensive, unsuitable for on-site and high throughput analysis, and need well-trained personnel. To circumvent these drawbacks, many efforts have been devoted towards the development of biosensors, using nucleic acid as bio-recognition element. In this review, we will focus on recent significant advances made in two types of DNA-based biosensors, namely genosensors, and aptasensors. In genosensor approach, DNA or RNA target is detected through the hybridization reaction between DNA or RNA and ssDNA sensing element, while in aptasensor method, DNA or RNA aptamer, capable of binding to a target molecule with high affinity and specificity, plays the role of receptor. The goal of this article is to review the innovative methods that have been emerged in genosensor and aptasensor during recent years. Particular attention is given to recent advances and trends in selection of biorecognition element, DNA immobilization strategies and sensing formats.

Aptamers: versatile probes for flow cytometry

Aptamers are nucleic acid oligomers with distinct conformational shapes that allow them to bind targets with high affinity and specificity. Aptamers are selected from a random oligonucleotide library by their capability to bind a certain molecular target. A variety of targets ranging from small molecules like amino acids to complex targets and whole cells have been used to select aptamers. These characteristics and the ability to create specific aptamers against virtually any cell type in a process termed "systematic evolution by exponential enrichment" make them interesting tools for flow cytometry. In this contribution, we review the application of aptamers as probes for flow cytometry, especially cell-phenotyping and detection of various cancer cell lines and virus-infected cells and pathogens. We also discuss the potential of aptamers combined with nanoparticles such as quantum dots for the generation of new multivalent detector molecules with enhanced affinity and sensitivity. With regard to recent advancements in aptamer selection and the decreasing costs for oligonucleotide synthesis, aptamers may rise as potent competitors for antibodies as molecular probes in flow cytometry.

In vitro selection of a DNA aptamer targeted against Shigella dysenteriae

To identify DNA aptamers demonstrating binding specificity for Shigella dysenteriae, a whole-bacterium Systemic Evolution of Ligands by Exponential enrichment (SELEX) method was applied to a combinatorial library of single-stranded DNA (ssDNA) molecules. After several rounds of selection using S. dysenteriae as the target, the highly enriched oligonucleotide pool was sequenced and then grouped into different families based on primary sequence homologies and similarities in the secondary structures. Aptamer S 1, which showed particularly high binding affinity in preliminary studies, was chosen for further characterisation. This aptamer displayed a dissociation constant (Kd value) of 23.47 ± 2.48 nM. Binding assays to assess the specificity of aptamer S 1 showed high binding affinity for S. dysenteriae and low apparent binding affinity for other bacteria. The ssDNA aptamers generated may serve as a new type of molecular probe for microbial pathogens, as it has the potential to overcome the tedious isolation and purification requirements for complex targets.

In silico maturation of binding-specificity of DNA aptamers against Proteus mirabilis

Proteus mirabilis is a prominent cause of catheter-associated urinary tract infections (CAUTIs) among patients undergoing long-term bladder catheterization. There are currently no effective means of preventing P. mirabilis infections, and strategies for prophylaxis and rapid early diagnosis are urgently required. Aptamers offer significant potential for development of countermeasures against P. mirabilis CAUTI and are an ideal class of molecules for the development of diagnostics and therapeutics. Here we demonstrate the application of Cell-SELEX to identify DNA aptamers that show high affinity for P. mirabilis. While the aptamers identified displayed high affinity for P. mirabilis cells in dot blotting assays, they also bound to other uropathogenic bacteria. To improve aptamer specificity for P. mirabilis, an in silico maturation (ISM) approach was employed. Two cycles of ISM allowed the identification of an aptamer showing 36% higher specificity, evaluated as a ratio of binding signal for P. mirabilis to that for Escherichia coli (also a cause of CAUTI and the most common urinary tract pathogen). Aptamers that specifically recognize P. mirabilis would have diagnostic and therapeutic values and constitute useful tools for studying membrane-associated proteins in this organism.

Blocking the attachment of cancer cells in vivo with DNA aptamers displaying anti-adhesive properties against the carcinoembryonic antigen

The formation of metastatic foci occurs through a series of cellular events, initiated by the attachment and aggregation of cancer cells leading to the establishment of micrometastases. We report the derivation of synthetic DNA aptamers bearing anti-adhesive properties directed at cancer cells expressing the carcinoembryonic antigen (CEA). Two DNA aptamers targeting the homotypic and heterotypic IgV-like binding domain of CEA were shown to block the cell adhesion properties of CEA, while not recognizing other IgV-like domains of CEACAM family members that share strong sequence and structural homologies. More importantly, the pre-treatment of CEA-expressing tumour cells with these aptamers prior to their intraperitoneal implantation resulted in the prevention of peritoneal tumour foci formation. Taken together, these results highlight the effectiveness of targeting the cell adhesion properties of cancer cells with aptamers in preventing tumour implantation.

Selection and characterization of aptamers against Salmonella typhimurium using whole-bacterium Systemic Evolution of Ligands by Exponential Enrichment (SELEX)

In this paper, a high-affinity ssDNA aptamer binding to Salmonella typhimurium was obtained by a whole-bacterium-based Systemic Evolution of Ligands by Exponential Enrichment (SELEX) procedure. After nine rounds of selection with S. typhimurium as the target, a highly enriched oligonucleotide pool was sequenced and then grouped into different families based on primary sequence homology and secondary structure similarity. Eleven sequences from different families were selected for further characterization via flow cytometry analysis. The results showed that the sequence ST2P demonstrates affinity for S. typhimurium much more strongly and specifically than other sequences tested. The estimated Kd value of this particularly promising aptamer was 6.33 ± 0.58 nM. To demonstrate the potential use of the aptamers in the quantitative determination of S. typhimurium, a fluorescent bioassay with the aptamer ST2P was prepared. Under optimal conditions, the correlation between the concentration of S. typhimurium and fluorescent signal was found to be linear within the range of 50-10(6) cfu/mL (R(2) = 0.9957). The limit of detection (LOD) of the developed method was found to be 25 cfu/mL. This work demonstrates that this aptamer could potentially be used to improve the detection of S. typhimurium.

Development of bacteriostatic DNA aptamers for salmonella

Salmonella is one of the most dangerous and common food-borne pathogens. The overuse of antibiotics for disease prevention has led to the development of multidrug resistant Salmonella. Now, more than ever, there is a need for new antimicrobial drugs to combat these resistant bacteria. Aptamers have grown in popularity since their discovery, and their properties make them attractive candidates for therapeutic use. In this work, we describe the selection of highly specific DNA aptamers to S. enteritidis and S. typhimurium. To evolve species-specific aptamers, twelve rounds of selection to live S. enteritidis and S. typhimurium were performed, alternating with a negative selection against a mixture of related pathogens. Studies have shown that synthetic pools combined from individual aptamers have the capacity to inhibit growth of S. enteritidis and S. typhimurium in bacterial cultures; this was the result of a decrease in their membrane potential.

Promising new assays and technologies for the diagnosis and management of infectious diseases

In the first decade of the 21st century, we have seen the completion of the human genome project and marked progress in the human microbiome project. The vast amount of data generated from these efforts combined with advances in molecular and biomedical technologies have led to the development of a multitude of assays and technologies that may be useful in the diagnosis and management of infectious diseases. Here, we identify several new assays and technologies that have recently come into clinical use or have potential for clinical use in the near future. The scope of this review is broad and includes topics such as the serum marker procalcitonin, gene expression profiling, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS), and nucleic acid aptamers. Principles that underlie each assay or technology, their clinical applications, and potential strengths and limitations are addressed.

Aptamer-based impedimetric sensor for bacterial typing

The development of an aptamer-based impedimetric sensor for typing of bacteria (AIST-B) is presented. Highly specific DNA aptamers to Salmonella enteritidis were selected via Cell-SELEX technique. Twelve rounds of selection were performed; each comprises a positive selection step against S. enteritidis and a negative selection step against a mixture of related pathogens, including Salmonella typhimurium, Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, and Citrobacter freundii, to ensure the species-specificity of the selected aptamers. After sequencing of the pool showing the highest binding affinity to S. enteritidis, a DNA sequence of high affinity to the bacteria was integrated into an impedimetric sensor via self-assembly onto a gold nanoparticles-modified screen-printed carbon electrode (GNPs-SPCE). Remarkably, this aptasensor is highly selective and can successfully detect S. enteritidis down to 600 CFU mL(-1) (equivalent to 18 CFU in 30 μL assay volume) in 10 min and distinguish it from other Salmonella species, including S. typhimurium and S. choleraesuis. This report is envisaged to open a new venue for the aptamer-based typing of a variety of microorganisms using a rapid, economic, and label-free electrochemical platform.

Binding-induced fluorescence turn-on assay using aptamer-functionalized silver nanocluster DNA probes

We present here a binding-induced fluorescence turn-on assay for protein detection. Key features of this assay include affinity binding-induced DNA hybridization and fluorescence enhancement of silver nanoclusters (Ag NCs) using guanine-rich DNA sequences. In an example of an assay for human α-thrombin, two aptamers (Apt15 and Apt29) were used and were modified by including additional sequence elements. A 12-nucleotide (nt) sequence was used to link the first aptamer with a nanocluster nucleation sequence at the 5'-end. The second aptamer was linked through a complementary sequence (12-nt) to a G-rich overhang at the 3'-end. Binding of the two aptamer probes to the target protein initiates hybridization between the complementary linker sequences attached to each aptamer and thereby bring the end of the G-rich overhang to close proximity to Ag NCs, resulting in a significant fluorescence enhancement. With this approach, a detection limit of 1 nM and a linear dynamic range of 5 nM-2 μM were achieved for human α-thrombin. This fluorescence assay is performed in a single tube, and it does not require washing or separation steps. The principle of the binding-induced DNA hybridization and fluorescence enhancement of Ag NCs can be extended to other homogeneous assay applications provided that two appropriate probes are available to bind with the same target molecule.

Selection and identification of a DNA aptamer targeted to Vibrio parahemolyticus

A whole-bacterium systemic evolution of ligands by exponential enrichment (SELEX) method was applied to a combinatorial library of FAM-labeled single-stranded DNA molecules to identify DNA aptamers demonstrating specific binding to Vibrio parahemolyticus . FAM-labeled aptamer sequences with high binding affinity to V. parahemolyticus were identified by flow cytometric analysis. Aptamer A3P, which showed a particularly high binding affinity in preliminary studies, was chosen for further characterization. This aptamer displayed a dissociation constant (K(d)) of 16.88 ± 1.92 nM. Binding assays to assess the specificity of aptamer A3P showed a high binding affinity (76%) for V. parahemolyticus and a low apparent binding affinity (4%) for other bacteria. Whole-bacterium SELEX is a promising technique for the design of aptamer-based molecular probes for microbial pathogens that does not require the labor-intensive steps of isolating and purifying complex markers or targets.

Recent developments in protein and cell-targeted aptamer selection and applications

Because of their easily modified chemical structures and wide range of targets, aptamers are ideal candidates for various applications, such as biomarker discovery, target diagnosis, molecular imaging, and drug delivery. Aptamers are oligonucleotide sequences that can bind to their targets specifically via unique three dimensional (3-D) structures. Usually, aptamers are obtained from repeated rounds of in vitro or in vivo selection termed SELEX (Systematic Evolution of Ligands by EXponential enrichment), which can generate aptamers with high affinity and specificity for many kinds of targets, such as biomedically important proteins and even cancer cells. In this review, some basic principles and recent developments in the design of SELEX process are discussed, hopefully to provide some guidelines towards performing more efficient aptamer isolation procedures. Moreover, the biomedical and bioanalytical applications of aptamers are further reviewed, based on some smart biochemical modifications of these oligonucleotide structures.

Selection and analytical applications of aptamers binding microbial pathogens

DNA aptamers specifically recognizing microbial cells and viruses have a range of analytical and therapeutic applications. This article describes recent advances in the development of aptamers targeting specific pathogens (e.g., live bacteria, whole viral particles, and virally-infected mammalian cells). Specific aptamers against pathogens have been used as affinity reagents to develop sandwich assays, to label and to image cells, to bind with cells for flow-cytometry analysis, and to act as probes for development of whole-cell biosensors. Future applications of aptamers to pathogens will benefit from recent advances in improved selection and new aptamers containing modified nucleotides, particularly slow off-rate modified aptamers (SOMAmers).

Methods To Identify Aptamers against Cell Surface Biomarkers

Aptamers are nucleic acid-based ligands identified through a process of molecular evolution named SELEX (Systematic Evolution of Ligands by Exponential enrichment). During the last 10-15 years, numerous aptamers have been developed specifically against targets present on or associated with the surface of human cells or infectious pathogens such as viruses, bacteria, fungi or parasites. Several of the aptamers have been described as potent probes, rivalling antibodies, for use in flow cytometry or microscopy. Some have also been used as drugs by inhibiting or activating functions of their targets in a manner similar to neutralizing or agonistic antibodies. Additionally, it is straightforward to conjugate aptamers to other agents without losing their affinity and they have successfully been used in vitro and in vivo to deliver drugs, siRNA, nanoparticles or contrast agents to target cells. Hence, aptamers identified against cell surface biomarkers represent a promising class of ligands. This review presents the different strategies of SELEX that have been developed to identify aptamers for cell surface-associated proteins as well as some of the methods that are used to study their binding on living cells.

Molecular aptamers for drug delivery

The active targeting of drugs in a cell-, tissue- or disease-specific manner represents a potentially powerful technology with widespread applications in medicine, including the treatment of cancers. Aptamers have properties such as high affinity and specificity for targets, easy chemical synthesis and modification, and rapid tissue penetration. They have become attractive molecules in diagnostics and therapeutics rivaling and, in some cases, surpassing other molecular probes, such as antibodies. In this review, we highlight the recent progress in aptamer-mediated delivery for therapeutics and disease-targeting based on aptamer integration with a variety of nanomaterials, such as gold nanorods, DNA micelles, DNA hydrogels and carbon nanotubes.