Covalent Organic Polymers and Frameworks for Fluorescence-Based Sensors

Water-Mediated Hydrogen Bond Network Drives Highly Crystalline Structure Formation of Crown Ether-Based Covalent Organic Framework for Sr Adsorption

Covalent organic frameworks (COFs) with crown ether units have drawn great attention due to their potential applications in adsorption, catalysis, and sensing. However, employing crown ethers to construct COFs is still challenging in light of the flexible nature of macrocycles. Here, a highly crystalline one-dimensional covalent organic framework (1D-18C6-COF) with crown ether units on the ribbon edge was synthesized. The water-mediated hydrogen bond network and π-π stacking hold the 1D COF ribbons together. The combination of experimental and DFT studies demonstrated that the hydrogen bond network plays a crucial role in the structure crystallinity. The 1D-18C6-COF was applied as an adsorbent for strontium, and it exhibited rapid kinetics with good selectivity. In the competitive adsorption experiment, a separation factor of 1900 was achieved, representing one of the largest values for cesium/strontium separation. This work provides new insights into the design and functional exploration of crystalline COFs with flexible units.

Synthesis of two-dimensional triazine covalent organic frameworks at ambient conditions to detect and remove water pollutants

Synthesis of fully triazine frameworks (C3N3) by metal catalyzed reactions at high temperatures results in carbonized and less-defined structures. Moreover, metal impurities affect the physicochemical, optical and electrical properties of the synthesized frameworks, dramatically. In this work, two-dimensional C3N3 (2DC3N3) has been synthesized by in situ catalyst-free copolymerization of sodium cyanide and cyanuric chloride, as cheap and commercially available precursors, at ambient conditions on gram scale. Reaction between sodium cyanide and cyanuric chloride resulted in electron-poor polyfunctional intermediates, which converted to 2DC3N3 with several hundred micrometers lateral size at ambient conditions upon [2 + 2+2] cyclotrimerization. 2DC3N3 sheets, in bulk and individually, showed strong fluorescence with 63% quantum yield and sensitive to small objects such as dyes and metal ions. The sensitivity of 2DC3N3 emission to foreign objects was used to detect low concentration of water impurities. Due to the high negative surface charge (-37.7 mV) and dispersion in aqueous solutions, they demonstrated a high potential to remove positively charged dyes from water, exemplified by excellent removal efficiency (>99%) for methylene blue. Taking advantage of the straightforward production and strong interactions with dyes and metal ions, 2DC3N3 was integrated in filters and used for the fast detection and efficient removal of water impurities.

Mixed-Linkage Donor-Acceptor Covalent Organic Framework as a Turn-On Fluorescent Sensor for Aliphatic Amines

Amine determination is crucial to our daily life, including the prevention of pollution, the treatment of certain disorders, and the evaluation of food quality. Herein, a mixed-linkage donor-acceptor covalent organic framework (named DSE-COF) was first constructed by the polymerization between 2,4-dihydroxybenzene-1,3,5-tricarbaldehyde (DTA) and 4,4'-(benzo[c][1,2,5]selenadiazole-4,7-diyl)dianiline (SEZ). DSE-COF displayed superior turn-on fluorescent responses to primary, secondary, and tertiary aliphatic amines, such as cadaverine, isopropylamine, sec-butylamine, cyclohexylamine, hexamethylenediamine, di-n-butylamine, and triethylamine in absolute acetonitrile than other organic species. Further experiments and theoretical calculations demonstrated that the combination of intramolecular charge transfer (ICT) and photoinduced electron transfer (PET) effects between the DSE-COF and aliphatic amines resulted in enhanced fluorescence. Credibly, DSE-COF can quantitatively detect cadaverine content in actual pork samples with satisfactory results. In addition, DSE-COF-based test papers could rapidly monitor cadaverine from real pork samples, manifesting the potential application of COFs in food quality inspection.

A Halogen-Bonded Organic Framework (XOF) Emissive Cocrystal for Acid Vapor and Explosive Sensing, and Iodine Capture

There is a strong and urgent need for efficient materials that can capture radioactive iodine atoms from nuclear waste. This work presents a novel strategy to develop porous materials for iodine capture by employing halogen bonding, mechanochemistry and crystal engineering. 3D halogen-bonded organic frameworks (XOFs) with guest-accessible permanent pores are exciting targets in crystal engineering for developing functional materials, and this work reports the first example of such a structure. The new-found XOF, namely TIEPE-DABCO, exhibits enhanced emission in the solid state and turn-off emission sensing of acid vapors and explosives like picric acid in nanomolar quantity. TIEPE-DABCO captures iodine from the gas phase (3.23 g g-1 at 75 °C and 1.40 g g-1 at rt), organic solvents (2.1 g g-1 ), and aqueous solutions (1.8 g g-1 in the pH range of 3-8); the latter with fast kinetics. The captured iodine can be retained for more than 7 days without any leaching, but readily released using methanol, when required. TIEPE-DABCO can be recycled for iodine capture several times without any loss of storage capacity. The results presented in this work demonstrate the potential of mechanochemical cocrystal engineering with halogen bonding as an approach to develop porous materials for iodine capture and sensing.

Synthesis and Characterization of Proton-Conducting Composites Prepared by Introducing Imidazole or 1,2,4-Triazole into AlPO-5 and SAPO-5 Molecular Sieves

The present work concerns proton-conducting composites obtained by replacing the water molecules present in aluminophosphate and silicoaluminophosphate AFI-type molecular sieves (AlPO-5 and SAPO-5) with azole molecules (imidazole or 1,2,4-triazole). Both the introduction of azoles and the generation of Brønsted acid centers by isomorphous substitution in aluminophosphate materials were aimed at improving the proton conductivity of the materials and its stability. In the presented study, AlPO-5 and several SAPO-5 materials differing in silicon content were synthesized. The obtained porous matrices were studied using PXRD, low-temperature nitrogen sorption, TPD-NH3, FTIR, and SEM. The proton conductivity of composites was measured using impedance spectroscopy. The results show that the increase in silicon content of the porous matrices is accompanied by an increase in their acidity. However, this does not translate into an increase in the conductivity of the azole composites. Triazole composites show lower conductivity and significantly higher activation energies than imidazole composites; however, most triazole composites show much higher stability. The different conductivity values for imidazole and triazole composites may be due to differences in chemical properties of the azoles.

Immunosensing of neuron-specific enolase based on signal amplification strategies via catalysis of ascorbic acid by heteropolysate COF

In view of the importance of quantification of neuron-specific enolase (NSE), an electrochemical NSE immunosensor was developed. The sandwich voltammetric immunosensor utilized vinyl-functionalized crystalline covalent organic framework (COFTAPT-Dva) modified electrode to load lots of Ab1 via thiol-ene "click" reaction as matrix. A crystalline cationic EB-COF:Br was used to load Au nanoparticles (AuNPs) and H3[PMo12O40] (PMo12) as immunoprobe. The AuNPs with the size of about 30 nm were firstly grown on EB-COF:Br and then a large number of electroactive PMo12 were uniformly assembled on AuNPs/EB-COF:Br via ion exchanging reaction. The AuNPs not only facilitated the bonding of Ab2 based on Au-S bond, but also improved performance of Ab2/AuNPs/EB-COF:PMo12 immunoprobe. The sensitivity of sandwich electrochemical immunosensor could be primarily amplified based on loaded abundant PMo12. Secondary sensitivity amplification of immunosensor could be achieved by using PMo12 to catalyze ascorbic acid. The linear range of sandwich voltammetric immunosensor based on current change of differential pulse voltammetry is 500 ± 36 fg mL-1 - 100 ± 8 ng mL-1. Thanks to the dual sensitivity amplification strategy, the sensitivity is as high as 54.06 ± 3.2 μA cm-2/lg(cNSE/ng mL-1), and the detection limit is as low as 166 ± 10.8 fg mL-1. It proves that it is completely feasible to amplify sensitivity of sandwich voltammetric immunosensors using polyoxometalate-COF and its catalytic substrate.

Strategies for Improving Selectivity and Sensitivity of Schiff Base Fluorescent Chemosensors for Toxic and Heavy Metals

Toxic cations, including heavy metals, pose significant environmental and health risks, necessitating the development of reliable detection methods. This review investigates the techniques and approaches used to strengthen the sensitivity and selectivity of Schiff base fluorescent chemosensors designed specifically to detect toxic and heavy metal cations. The paper explores a range of strategies, including functional group variations, structural modifications, and the integration of nanomaterials or auxiliary receptors, to amplify the efficiency of these chemosensors. By improving selectivity towards targeted cations and achieving heightened sensitivity and detection limits, consequently, these strategies contribute to the advancement of accurate and efficient detection methods while increasing the range of end-use applications. The findings discussed in this review offer valuable insights into the potential of leveraging Schiff base fluorescent chemosensors for the accurate and reliable detection and monitoring of heavy metal cations in various fields, including environmental monitoring, biomedical research, and industrial safety.

Porous organic polymers (POPs) for environmental remediation

Modern global industrialization along with the ever-increasing growth of the population has resulted in continuous enhancement in the discharge and accumulation of various toxic and hazardous chemicals in the environment. These harmful pollutants, including toxic gases, inorganic heavy metal ions, anthropogenic waste, persistent organic pollutants, toxic dyes, pharmaceuticals, volatile organic compounds, etc., are destroying the ecological balance of the environment. Therefore, systematic monitoring and effective remediation of these toxic pollutants either by adsorptive removal or by catalytic degradation are of great significance. From this viewpoint, porous organic polymers (POPs), being two- or three-dimensional polymeric materials, constructed from small organic molecules connected with rigid covalent bonds have come forth as a promising platform toward various leading applications, especially for efficient environmental remediation. Their unique chemical and structural features including high stability, tunable pore functionalization, and large surface area have boosted the transformation of POPs into various macro-physical forms such as thick and thin-film membranes, which led to a new direction in advanced level pollutant removal, separation and catalytic degradation. In this review, our focus is to highlight the recent progress and achievements in the strategic design, synthesis, architectural-engineering and applications of POPs and their composite materials toward environmental remediation. Several strategies to improve the adsorption efficiency and catalytic degradation performance along with the in-depth interaction mechanism of POP-based materials have been systematically summarized. In addition, evolution of POPs from regular powder form application to rapid and more efficient size and chemo-selective, "real-time" applicable membrane-based application has been further highlighted. Finally, we put forward our perspective on the challenges and opportunities of these materials toward real-world implementation and future prospects in next generation remediation technology.

An 'on-off-on' fluorescent switch based on a luminous covalent organic framework for the rapid and selective detection of glyphosate

Glyphosate, the most used herbicide in the world, has a residue problem that cannot be ignored. However, glyphosate itself does not have fluorescence emission and lacks the conditions for fluorescence detection. In this work, a rapid and selective fluorescence detection method of glyphosate was designed by an 'on-off-on' fluorescent switch based on a luminous covalent organic framework (L-COF). Only the fixed concentration of Fe3+ as an intermediate could trigger the fluorescent switch and no incubation step was required. The proposed method showed good accuracy with a correlation coefficient of 0.9978. The method's limits of detection and quantitation were 0.88 and 2.93 μmol/L, which were lower than the maximum allowable residue limits in some regulations. Environmental water samples and tomatoes were selected as actual samples to verify the application in a complex matrix. A satisfactory mean recovery from 87% to 106% was gained. Furthermore, Fe3+ could induce fluorescence quenching of L-COF through the photo-induced electron transfer (PET) effect, while the addition of glyphosate could block the PET effect to achieve detection. These results demonstrated the proposed method had abilities to detect glyphosate and broaden the application of L-COF.

A novel method to prepare water-soluble cellulose-based fluorescent probes for highly sensitive and selective detection and removal of Hg2+/Hg22+ ions

Improving the water solubility of natural product cellulose and using it to treat heavy metal ions is very important. In this work, cellulose-based fluorescent probes containing BODIPY fluorophore were synthesized by simple chemical method, which realized the selective recognition and removal of Hg2+/Hg22+ ions in an aqueous system. Firstly, fluorescent small molecule (BOK-NH2) bearing -NH2 group was synthesized through Knoevenagel condensation reaction between BO-NH2 and cinnamaldehyde. Secondly, via the etherification of -OH on the cellulose, substituents bearing -C ≡ CH groups with different lengths at the end are grafted on the cellulose. Finally, cellulose-based probes (P1, P2, and P3) were prepared by amino-yne click reaction. The solubility of cellulose is improved greatly, especially the cellulose derivative with branched long chains has excellent solubility in water (P3). Benefiting from the improved solubility, P3 could be processed into solutions, films, hydrogels, and powders. Upon the addition of Hg2+/Hg22+ ions, the fluorescence intensity enhanced, which are "turn-on" probes. At the same time, the probes could be utilized as efficient adsorbents for Hg2+/Hg22+ ions. The removal efficiency of P3 for Hg2+/Hg22+ is 79.7 %/82.1 %, and the adsorption capacity is 159.4 mg·g-1/164.2 mg·g-1. These cellulose-based probes are expected to be employed in the treatment of polluted environments.

Lanthanide Functionalized Covalent Organic Frameworks Hybrid Materials for Luminescence Responsive Chemical Sensing

Covalent organic frameworks (COFs) possess several unique features of structural and functional chemistry, together with other modular photophysical performance, which make them candidates for luminescence responsive chemical sensing. Lanthanide (Ln3+ ) functionalized COFs hybrid materials still keep the parent COFs' virtues and also embody the abundant multiple luminescence response with both COFs and Ln3+ ions or other guest species. In this review, the summary is highlighted on the lanthanide functionalized COFs hybrid materials and their relevant systems for luminescence responsive chemical sensing. It is subdivided into five sections involving the three main topics. Firstly, the basic knowledges of COFs materials related to the luminescence responsive chemical sensing are introduced (including three sections), involving the chemistry, application and post-synthetic modification (PSM) of COFs, the luminescence and luminescence responsive chemical sensing, and the luminescence responsive chemical sensing of non-lanthanide functionalized COFs hybrids materials. Secondly, the systematic progresses are outlined on the lanthanide functionalized COFs hybrid materials in luminescence responsive chemical sensing, which is the emphasis for this review. Finally, the conclusion and prospect are given.

Fluorinated covalent-organic polymers as stationary phase for analysis of organic fluorides by open-tubular capillary electrochromatography

Fluorinated porous materials, which can provide specific fluorine-fluorine interaction, hold great promise for fluoride analysis. Here, a novel fluorinated covalent-organic polymer was prepared by using 2,4,6-tris(4-aminophenyl)-1,3,5-triazine and 2,3,5,6-tetrafluorotelephtal aldehyde as the precursors and introduced as stationary phase for open-tubular capillary electrochromatography. The as-synthesized fluorinated covalent-organic polymer and the modified capillary column were characterized by infrared spectroscopy, scanning electron microscopy, and energy dispersive X-ray spectrometry. Based on strong hydrophobic interaction and fluorine-fluorine interaction provided by fluorinated covalent-organic polymer coating layer, the modified column showed powerful separation selectivity toward hydrophobic compounds, organic fluorides, and fluorinated pesticides. Additionally, the fluorinated covalent-organic polymer with good porosity and regular shape was uniformly and tightly coated on the capillary inner wall. The obtained highest column efficiency could reach up to 1.2 × 105 plates⋅m-1 for fluorophenol. The loading capacity of the modified column can reach 141 pmol for trifluorotoluene. Besides, the relative standard deviations of retention times for intraday run (n = 5), interday run (n = 3), and between columns (n = 3) were all less than 2.55%. Significantly, this novel fluorinated material-based stationary phase shows great application potential in fluorides analysis.

Large-Scale Synthesis of Covalent Organic Frameworks: Challenges and Opportunities

Connecting organic building blocks by covalent bonds to design porous crystalline networks has led to covalent organic frameworks (COFs), consequently transferring the flexibility of dynamic linkages from discrete architectures to extended structures. By virtue of the library of organic building blocks and the diversity of dynamic linkages and topologies, COFs have emerged as a novel field of organic materials that propose a platform for tailor-made complex structural design. Progress over the past two decades in the design, synthesis, and functional exploration of COFs in diverse applications successively established these frameworks in materials chemistry. The large-scale synthesis of COFs with uniform structures and properties is of profound importance for commercialization and industrial applications; however, this is in its infancy at present. An innovative designing and synthetic approaches have paved novel ways to address future hurdles. This review article highlights the fundamental of COFs, including designing principles, coupling reactions, topologies, structural diversity, synthetic strategies, characterization, growth mechanism, and activation aspects of COFs. Finally, the major challenges and future trends for large-scale COF fabrication are outlined.

A carboxyl-functionalized covalent organic polymer for the efficient adsorption of saxitoxin

Saxitoxin (STX), the most widely distributed neurotoxin in marine waters and emerging cyanotoxin of concern in freshwaters, causes paralytic shellfish poisoning in humans upon consumption of contaminated shellfish. To allow for the efficient monitoring of this biotoxin, it is of high importance to find high-affinity materials for its adsorption. Herein, we report the design and synthesis of a covalent organic polymer for the efficient adsorption of STX. Two β-keto-enamine-based materials were prepared by self-assembly of 2,4,6-triformylphloroglucinol (Tp) with 2,5-diaminobenzoic acid (Pa-COOH) to give TpPa-COOH and with 2,5-diaminotoluene (Pa-CH₃) to give TpPa-CH₃. The carboxylic acid functionalized TpPa-COOH outperformed the methyl-bearing counterpart TpPa-CH₃ by an order of magnitude despite the higher long-range order and surface area of the latter. The adsorption of STX by TpPa-COOH was fast with equilibrium reached within 1 h, and the Langmuir adsorption model gave a calculated maximum adsorption capacity, Q_m, of 5.69 mg g^-1, making this material the best reported adsorbent for this toxin. More importantly, the prepared TpPa-COOH also showed good reusability and high recovery rates for STX in natural freshwater, thereby highlighting the material as a good candidate for the extraction and pre-concentration of STX from aquatic environments.

Covalent Organic Framework Nanosheets for Fluorescence Quantification of Peptide

Rapid and sensitive quantification of peptides plays an important role in clinical diagnosis. Fluorescence assay is one of the most promising peptide detection tools, but it relies on intrinsic fluorescence or additional derivatization, resulting in poor versatility. Covalent organic frameworks (COFs) have shown a good application prospect in the field of fluorescence detection, but their application scope is limited to heavy metal ions and some small polar organic molecules. Herein, we report the application of COFs nanosheet for fluorescence detection of peptides. Fluorescent sp² acrylonitrile-linked COFs nanosheets (TTAN-CON) were prepared by water-assisted ultrasonic exfoliation which performed with excellent fluorescence properties with Stokes shifts of 146 nm and fluorescence quantum yield of up to 24.45%. Compared to the bulk fluorescent COFs, exfoliated CONs films performed with better stability of fluorescence signal in solution. We found the fluorescence of TTAN-CON can be effectively quenched by hydrophobic peptides at a very rapid rate (less than 5 min per sample). TTAN-CON presented good sensitivity and selectivity for hydrophobic peptides detection via the static and dynamic joint quenching mechanism. TTAN-CON was further used to detect NLLGLIEAK and ProGRP_31-98, two target peptide fragments of lung cancer biomarker ProGRP. The fluorescence intensities of TTAN-CON were negative linearly correlated with the amounts of hydrophobic NLLGLIEAK over the range of 5-1000 ng/mL with the correlation coefficients over 0.99, and the limit of detection was 1.67 ng/mL, displaying higher sensitivity and convenience than traditional optical methods. What's more, the quantification of ProGRP_31-98 was achieved by the quantification of hydrophobic peptides in its enzyme hydrolysis products. We anticipate COFs nanosheets to be a universal fluorescence detection work-box for peptides biomarkers with clinical significance.

Facile preparation of bimetallic Au-Cu nanoclusters as fluorescent nanoprobes for sensitive detection of Cr3+ and S2O82- ions

Metallic nanoclusters (NCs) have attracted special attention from researchers due to their interesting optical properties. In this experiment, we proposed a facile one-step method for the synthesis of bimetallic gold-copper nanoclusters (AuCuNCs). The prepared AuCuNCs were characterized by fluorescence spectroscopy (FL), UV-vis absorption spectrum, transmission electron microscopy (TEM), etc. The emission peak of the prepared AuCuNCs was located at 455 nm and showed blue luminescence under the excitation of 365 nm UV light. Furthermore, after the addition of Cr³⁺ and S₂O₈^2- ions, the FL emission intensity of AuCuNCs was significantly reduced at 455 nm and there was a color change of diminished blue luminescence under UV lamp. The AuCuNCs exhibited excellent linearity and sensitivity for the detection of Cr³⁺ and S₂O₈^2- ions. The limits of detection (LOD) for the Cr³⁺ and S₂O₈^2- ions were calculated to be 1.5 and 0.037 μM, respectively. Finally, the recoveries of Cr³⁺ and S₂O₈^2- ions in Runxi Lake and tap water were measured by standard addition recovery test and were 96.66 ∼ 116.29 %, 95.75 ∼ 119.4 %.

An in-situ strategy to construct uracil-conjugated covalent organic frameworks with tunable fluorescence/recognition characteristics for sensitive and selective Mercury(II) detection

Previous researches of covalent organic frameworks (COFs) have shown their potential as fluorescent probes, but the regulation of their optical properties and recognition characteristics still remains a challenge, and most of reports required complicated post-decoration to improve the sensing performance. In this context, we propose a novel in-situ strategy to construct uracil-conjugated COFs and modulate their fluorescence properties for sensitive and selective mercury(II) detection. By using 1,3,6,8-tetrakis(4-formylphenyl)pyrene (TFPPy) and 1,3,6,8-tetrakis(4-aminophenyl)pyrene (TAPPy) as fundamental blocks and 5-aminouraci (5-AU) as the functional monomer, a series of COFs (Py-COFs and Py-U-COFs-1 to Py-U-COFs-5) with tunable fluorescence were solvothermally synthesized through an in-situ Schiff base reaction. The π-conjugated framework serves as a signal reporter, the evenly and densely distributed uracil acts as a mercury(II) receptor, and the regular pores (channels) make the rapid and sensitive detection of the mercury(II) possible. In this research, we manage to regulate the crystalline structure, the fluorescence properties, and the sensing performance of COFs by simply changing the molar ratio of precursors. We expect this research to open up a new strategy for effective and controllable construction of functionalized COFs for environmental analysis.

A chiral fluorescent COF prepared by post-synthesis modification for optosensing of imazamox enantiomers

We report a post-synthesis modification for the preparation of a novel chiral fluorescent covalent organic framework (COF) for selective recognization of imazamox enantiomers. In this study, chiral COF was firstly synthesized via a Schiff-base reaction between 2,5-dihydroxyterephthalaldehyde (Dha) and 1,3,5-tris(4-aminophenyl)benzene (Tab) followed by a nucleophilic substitution using (1S)-(+)-10-camphorsulfonyl chloride as chiral modifier. The resulting regular spherical chiral COF Dha Tab not only presented the high optical efficiency, strong covalent bond structure, good crystallinity, large specific surface area but also showed the specific enantioselectivity and quick identification for imazamox enantiomers among five pesticide enantiomers (S/R-imazamox, acephate, acetochlor, propisochlor and metalaxyl). The detection limits for S- and R-imazamox were 4.20 μmol/L and 3.03 μmol/L, respectively. Meanwhile, the enantiomeric excess value (5.30 %) manifested that the chiral COF Dha Tab had the strong adsorption ability to imazamox enantiomers and more higher affinity for R-imazamox. This chiral fluorescent COF opened up a new way for the recognition of enantiomers.

"Turn-on" fluorescent sensor for oleanolic acid based on o-phenyl-bridged bis-tetraphenylimidazole

Fluorescent sensors had been extensively applied on sensing various biomolecules effectively, but no fluorescent sensor for oleanolic acid was presented up to now. In this work, the first fluorescent sensor for oleanolic acid was designed and synthesized based on o-phenyl-bridged bis-tetraphenylimidazole (PTPI). PTPI was prepared by bridging two tetraphenylimidazole units and o-phenylenediamine via Schiff-base condensation in yield of 86%. PTPI showed high sensing selectivity for oleanolic acid among 26 biomolecules and ions. The blue fluorescence at 482 nm was enhanced by 4.5 times after sensing oleanolic acid in aqueous media. The fluorescence sensing ability of PTPI for oleanolic acid maintained stable in pH = 5-9. The detecting limitation was as low as 0.032 μM. The detecting mechanism was clarified as 1:1 binding stoichiometry by fluorescence Job's plot, mass spectrometry, ¹H nuclear magnetic resonance and fourier transform infrared spectroscopy. The detecting ability of PTPI for oleanolic acid was successfully used for paper test and real samples of grapes and Kuding tea with recoveries in the range of 96.0%-106.0%, indicating the good application potential for on-site detecting oleanolic acid in real samples of fruits and food.

Zn-MOFs composites loaded with silver nanoparticles are used for fluorescence sensing pesticides, Trp, EDA and photocatalytic degradation of organic dyes

The abuse of pesticides, antibiotics, organic solvents, etc., not only deteriorates the ecological environment, but even affects the normal development of organisms, posing a serious threat to global public health.Efficient and sensitive detection of pesticides, antibiotics, organic solvents and so on are very important, but also a challenge to scientists. By depositing Ag nanoparticles on the surface of Zn-MOF (1: {[Zn₂(bta)(bpy)(H₂O)₂]·2H₂O}_n), a new type of composite material (Ag@1) was successfully synthesized and analyzed by TEM, EDS, XPS, XRD, IR and other characterization methods. Ag@1 can serve as multi-response fluorescence sensor to detect pesticides (fluazinam (FLU) and emamectin benzoate (EMB)), Tryptophan (Trp) and Ethylenediamine (EDA). In particular, Ag@1 showed "turn-off" fluorescence sensing for FLU and EDA, and "turn-on" fluorescence sensing for EMB and Trp. It is worth mentioning that we further explored its analysis of FLU and Trp in real water samples and fetal bovine serum. The recoveries are satisfactory, 97.95 % - 102.39 % and 96.69 % - 101.85 %, respectively. In addition, the photocatalytic performance of Ag@1 was found to be excellent, the degradation rate of methylene blue (MB) reached 86 %, and its degradation mechanism was discussed.

Simultaneous detection and separation of uranium based on a fluorescent amidoxime-functionalized covalent organic polymer

To ensure the long-term sustainable development of nuclear energy as well as the prevention and control of uranium pollution, new materials that can simultaneously detect and separate uranium are still urgently needed. Herein, a new fluorescent covalent organic polymer (COP), namely HT-COP-AO, was synthesized andemployed as both the fluorescent probe and absorbent for simultaneous uranium detection and separationconsidering its excellent fluorescence property and strong uranium coordination ability. The results showed that the fluorescence of HT-COP-AO was quickly quenched by uranium within 2 min, and the limit of detection was 0.23 µM (3σ/K). Further studies implied that uranium was coordinated with the amidoxime groups of HT-COP-AO through U-N and O = U = O bonds, which resulted in electron transfer from uranium to HT-COP-AO and quenching the fluorescence of HT-COP-AO consequently. Meanwhile, HT-COP-AO exhibited excellent absorption ability towards uranium, and the maximum absorption capacity (q_max = 401.3 mg/g) was higher than most reported amidoxime modified materials. The HT-COP-AO also showed high selectivity for both uranium detection and separation which makes it a great promising for uranium monitoring in real water samples.

A ratiometric luminescence sensing platform based on lanthanide-based silica nanoparticles for selective and sensitive detection of Fe3+ and Cu2+ ions

Detection of Fe(III) and Cu(II) in water is highly desirable because their abnormal levels can cause serious harm to human health and environmental safety. In this work, a ratiometric luminescence sensing platform based on lanthanide-based silica nanoparticles was constructed for the detection of Fe³⁺ and Cu²⁺ ions. The terbium-silica nanoparticles (named SiO₂@Tb) with dual-emission signals were successfully prepared by grafting Tb³⁺ ions onto trimellitic anhydride (TMA) functionalized silica nanospheres. It can serve as a ratiometric fluorescent probe for the detection of Fe³⁺ and Cu²⁺ ions in water with the green emission of Tb³⁺ ions as a response signal and the blue emission of silica nanospheres as the reference signal. Significantly, an easy-to-differentiate color change for visual detection was also realized. SiO₂@Tb shows high sensitivity even in very low concentration regions towards the sensing of Fe³⁺ and Cu²⁺ with low detection limits of 0.75 μM and 0.91 μM, respectively. Moreover, the mechanism for the luminescence quenching of SiO₂@Tb was systematically investigated, and was attributed to the synergetic effect of the absorption competition quenching (ACQ) mechanism and cation exchange. This study demonstrates that SiO₂@Tb can be employed as a promising fluorescent probe for the detection of Fe³⁺ and Cu²⁺ ions, and the combination of lanthanide ions with silica nanoparticles is an effective strategy to construct a ratiometric fluorescent sensing platform for the determination of analytes in environmental detection.

Guanidine-Functionalized Fluorescent sp2 Carbon-Conjugated Covalent Organic Framework for Sensing and Capture of Pd(II) and Cr(VI) Ions

Palladium is a key element in fuel cells, electronic industries, and organic catalysis. At the same time, chromium is essential in leather, electroplating, and metallurgical industries. However, their unpremeditated leakage into aquatic systems has caused human health and environmental apprehensions. Herein, we reported the development of an sp² carbon-conjugated fluorescent covalent organic framework with a guanidine moiety (sp² c-gCOF) that showed excellent thermal and chemical stability. The sp² c-gCOF showed effective sensing, capture, and recovery/removal of Pd(II) and Cr(VI) ions, which could be due to the highly accessible pore walls decorated with guanidine moieties. The fluorescent sp² c-gCOF showed higher selectivity for Pd(II) and Cr(VI) ions, with an ultra-low detection limit of 2.7 and 3.2 nM, respectively. The analysis of the adsorption properties with a pseudo-second-order kinetic model showed that sp² c-gCOF could successfully and selectively remove both Pd(II) and Cr(VI) ions from aqueous solutions. The polymer also showed excellent capture efficacy even after seven consecutive adsorption-desorption cycles. Hence, this study reveals the potential of fluorescent sp² c-gCOF for detecting, removing, and recovering valuable metals and hazardous ions from wastewater, which would be useful for economic benefit, environmental safety, human health, and sustainability. The post-synthetic modification of sp² c-COF with suitable functionalities could also be useful for sensing and extracting other water pollutants and valuable materials from an aqueous system.

A color-change fluorescence sensor for oleanolic acid based on chiral camphanic decorated bis-cyanostilbene

Although various fluorescent sensors for biomolecules had been extensively reported, the effective fluorescent sensor was seldom reported for detecting oleanolic acid up to now. This work reports the first color-change fluorescence sensor for oleanolic acid based on a bridging bis-cyanostilbene derivative with chiral camphanic groups (C-BCS). C-BCS possessed the chartreuse fluorescence in aqueous media, which transferred to strong blue fluorescence in the presence of oleanolic acid. This sensing ability of C-BCS for oleanolic acid exhibited the high selectivity among all kinds of biomolecules and ions. The good linearity between the fluorescence intensity and concentration of oleanolic acid was acquired in the range of 0.2 × 10^-6 to 8.0 × 10^-6 M with the detecting limitation of 0.0582 μM. The 1:1 binding process was clarified as oleanolic acid located in the opening cavity composed of two bridging cyanostilbene units and two chiral camphanic groups based on multiple hydrogen bonds and hydrophobic interaction. The detecting ability of C-BCS was applied on sensing oleanolic acid in thin-layer chromatography analysis, imprinting experiment, tap water, and tea samples, suggesting the effective on-site sensing abilities of C-BCS for oleanolic acid in real samples and daily life.

Recent advances in fluorescence chemosensors for ammonia sensing in the solution and vapor phases

Developing low-cost and reliable sensor systems for the detection of trace amounts of toxic gases is an important area of research. Ammonia (NH₃) is a commonly produced industrial chemical and a harmful colorless pungent gas released from various manufacturing and processing industries. Continuous exposure to NH₃ vapor causes serious menace to human health, microorganisms, and the ecosystem. Exposure to relatively higher concentrations of NH₃ severely affects the respiratory system and leads to kidney failure, nasal erosion ulcers, and gastrointestinal diseases. Excessive accumulation of NH₃ in the biosphere can cause various metabolic disruptions. As a consequence of this, therefore, suitable sensing methods for selective detection and quantification of trace amounts of NH₃ are of utmost need to protect the environment and living systems. Given this, there have been significant research advances in the preceding years on the development of fluorescence chemosensors for efficient sensing and monitoring of the trace concentration of NH₃ both in solution and vapor phases. This review article highlights several fluorescence chemosensors reported until recently for sensing and quantifying NH₃ in the vapor phase or ammonium ions (NH₄⁺) in the solution phase. The wide variety of fluorescence chemosensors discussed in this article are systematically gathered according to their structures, functional properties, and fluorescence sensing properties. Finally, the usefulness and existing challenges of using the fluorescence-based sensing method for NH₃ detection and the future perspective on this research area have also been highlighted.

TPB-DMTP@S-CDs/MnO2 Fluorescence Composite on a Dual-Emission-Capture Sensor Module for Fingerprint Recognition of Organophosphorus Pesticides

Residues of organophosphorus pesticides (OPs) raise considerable concern, while identifying OPs from unknown sources is still a challenge to onsite fluorescence techniques. Herein, a dual-emission-capture sensor module, based on a TPB-DMTP@S-CDs/MnO₂ fluorescence composite, is developed for OP fingerprint recognition. TPB-DMTP@S-CDs/MnO₂, synthesized by a hydrothermal method and self-assembly, is spectrographically validated as a dual-wavelength fluorescence source. OP-sensitive catalysis (acetylcholinesterase on acetylthiocholine chloride) is designed to regulate fluorescence by decomposing quenchable MnO₂. A flexibly fabricated sensor module supports the optimal dual-wavelength fluorescence excitations and captures and converts fluorescence emissions into equivalent photocurrents for feasible access. The most prominent finding is that dual-fluorescence emissions alternatively respond to levels, species, and multi-pH pretreatments of OPs due to varied MnO₂ sizes and distributions. Therefore, OP fingerprint recognition is conducted by refining the multidimensional information from fluorescence-triggered photocurrents and preset hydrolyzation using principal component analysis and the rule of maximum covariance. The recommended method provides a wide dynamic range (1 × 10^-6 ∼ 12 μg mL^-1), a good limit of detection (7.9 × 10^-7 μg mL^-1), 15-day stability, and good selectivity to guarantee fingerprint recognition. For laboratory and natural samples, this method credibly identifies a single kind of OPs from multiple species at trace levels (10^-5 μg mL^-1) and performs well in two-component and multicomponent analyses.

The preparation of 2,2'-bithiophene-based conjugated microporous polymers by direct arylation polymerization and their application in fluorescence sensing 2,4-dinitrophenol

In this paper, we report the synthetic strategy of direct arylation polymerization (DAP) for four 2,2'-bithiophene-based conjugated microporous polymers (the 2,2'-BTh-based CMPs) by coupling 2,2'-bithiophene with the building blocks containing bromine. Compared to conventional coupling polymerization, this synthetic scheme is simple, facile and atomically efficient owing to neither preactivating the C-H bonds in 2,2'-bithiophene using organometallic reagents nor synthesis of complex thiophene-based building blocks. The resulting 2,2'-BTh-based CMPs exhibit excellent thermal stability, high specific surface areas, and good microporosity. Their specific surface areas are higher than that of other previously reported CMPs prepared with DAP. The four 2,2'-BTh-based CMPs can be utilized for multicolor fluorescence sensing of 2,4-dinitrophenol (DNP) with the high sensitivity and selectivity. The sensitivities appear to increase with the degree of structural distortion.

Poly-L-aspartic acid based nonconventional luminescent biomacromolecules with efficient emission in dilute solutions for Al3+ detection

Nonconventional luminescent macromolecules exhibiting bright fluorescence or phosphorescence emission at high concentrations and solid-state have attracted significant attention due to their promising application in different fields. However, most reported nonconventional luminescent macromolecules show weak or no emission in dilute solutions, limiting their large-scale applications. Herein, nonconventional luminescent biomacromolecules with hydrophobic rigid chains, hydrophilic flexibility and inter- or intra-molecular hydrogen bonding interactions were proposed to achieve effective luminescence in dilute solutions. Poly-L-aspartic acid (PASA) with a fluorescence quantum yield of 4.6 % in a dilute solution (0.8 mg/mL) was synthesized to validate this design strategy. The fluorescence intensity of PASA solution increased with the increase of the concentration, demonstrating a clustering-triggered emission (CTE) effect. Furthermore, the fluorescence intensity significantly enhanced when adding Al³⁺ into PASA aqueous solution via the Al³⁺ recognition effect. The detection limits for Al³⁺ (1.71 × 10^-6 mol/L) meet the World Health Organization (WHO) requirements for food detection. At last, PASA solid-state samples exhibit room temperature phosphorescence emission.

Fully Flexible Covalent Organic Frameworks for Fluorescence Sensing 2,4,6-Trinitrophenol and p-Nitrophenol

Nitrophenols are important nitroaromatic compounds, both important environmental pollutants and dangerous explosives, posing a devastating danger and pollution threat to humans. It is vital to detect efficiently trace nitrophenols in the environment. In this contribution, a series of fully flexible cyclotriphosphazene-based COFs (FFCP COFs: HDADE, HBAPB, and HBPDA), prepared with both a flexible knot and flexible linkers of different lengths, were used for sensing 2,4,6-trinitrophenol (TNP) and p-nitrophenol (p-NP) in real time with excellent sensitivity and selectivity. The quenching constants of HDADE by TNP, HBAPB, and HBPDA by p-NP are 6.29 × 10⁴, 2.17 × 10⁵, and 2.48 × 10⁵ L·mol^-1, respectively. The LODs of TNP and p-NP are 1.19 × 10^-11, 6.91 × 10^-12, and 6.05 × 10^-12 mol·L^-1. Their sensitivities increase with the linker length, which is better than the corresponding COFs composed of rigid linkers. There is only a photoinduced electron transfer mechanism in the fluorescence quenching of HBPDA by p-NP. Meanwhile, the mechanisms of photoinduced charge transfer and resonance energy transfer exist in the fluorescence quenching of HDADE by TNP and the fluorescence quenching of HBAPB by p-NP.

Covalently bridged pillararene-based polymers: structures, synthesis, and applications

Covalently bridged pillararene-based polymers (CBPPs) are a special class of macrocycle-based polymers in which multiple pillararene monomers are attached to the polymer structures by covalent bonds. Owing to the unique molecular structures including the connection components or the spatial structures, CBPPs have become increasingly popular in applications ranging from environmental science to biomedical science. In this review, CBPPs are divided into three types (linear polymers, grafted polymers, and cross-linked polymers) according to their structural characteristics and described from the perspective of synthesis methods comprehensively. In addition, the applications of CBPPs are presented, including selective adsorption and separation, fluorescence sensing and detection, construction of supramolecular gels, anticancer drug delivery, artificial light-harvesting, catalysis, and others. Finally, the current challenging issues and comprehensive prospects of CBPPs are discussed.

The Preparation of Covalent Bonding COF-TpBD Coating in Arrayed Nanopores of Stainless Steel Fiber for Solid-Phase Microextraction of Polycyclic Aromatic Hydrocarbons in Water

Covalent organic framework (COF)-TpBD was grafted on the arrayed nanopores of stainless steel fiber (SSF) with (3-aminopropyl) triethoxysilane as the cross-linking agent. The prepared SSF bonded with COF-TpBD showed high thermal and chemical stability and excellent repeatability. The prepared SSF bonded with COF-TpBD was also used for the solid-phase microextraction (SPME) of seven kinds of polycyclic aromatic hydrocarbons (PAHs) in actual water samples, followed by gas chromatography with flame ionization detection (GC-FID) determination, which exhibited low limits of detection (LODs), good relative standard deviation (RSD) and high recoveries.

Reticular Synthesis of One-Dimensional Covalent Organic Frameworks with 4-c sql Topology for Enhanced Fluorescence Emission

Covalent organic frameworks (COFs) have been extensively investigated due to their unique structure, porosity, and functionality. However, at the topological level, COFs remain as two-dimensional (2D) or three-dimensional (3D) structures, while COFs with one-dimensional (1D) topology have not been systematically explored. In this work, we proposed a synthetic strategy for the construction of 1D-COFs based on non-linear edges and suitable high-symmetry vertices. Compared with their 2D-COFs counterparts, the 1D-COFs with AIEgens located at the vertex of the frame exhibited enhanced fluorescence. The density functional theory (DFT) calculations revealed that the dimensional-induced rotation restriction (DIRR) effect could spontaneously introduce additional non-covalent interactions between the strip frames, which could substantially diminish non-radiative transitions. This work also provides protocols for the design of 1D-COFs and a guidance scheme for the synthesis of emitting COFs.

BINOL-Containing Chiral Porous Polymers as Platforms for Enantiorecognition

The enantioselective discrimination of racemic compounds can be achieved through the design and preparation of a new family of chiral conjugated BINOL-porous polymers (CBPPs) from enantiopure (R)- or (S)-BINOL derivatives and 1,3,5-tris(4-phenylboronic acid)benzene or 1,3,5-tris(4-ethynylphenyl)benzene, 1,3,5-triethynyl-2,4,6-trifluorobenzene, and tetra(4-ethynylphenyl)methane as comonomers following Suzuki-Miyaura and Sonogashira-Hagihara carbon-carbon coupling approaches. The obtained CBPPs show high thermal stability, a good specific surface area, and a robust framework and can be applied successfully in the fluorescence recognition of enantiomers of terpenes (limonene and α-pinene) and 1-phenylethylamine. Fluorescence titration of CBPPs-OH in acetonitrile shows that all Sonogashira hosts exhibit a preference for the (R)-enantiomer over the (S)-enantiomer of 1-phenylethylamine, the selectivity being much higher than that of the corresponding BINOL-based soluble system used as a reference. However, the Suzuki host reveals a preference toward (S)-phenylethylamine. Regarding the sensing of terpenes, only Sonogashira hosts show enantiodifferentiation with an almost total preference for the (S)-enantiomer of limonene and α-pinene. Based on the computational simulations and the experimental data, with 1-phenylethylamine as the analyte, chiral recognition is due to the distinctive binding affinities resulting from N···H-O hydrogen bonds and the π-π interaction between the host and the guest. However, for limonene, the geometry of the adsorption complex is mostly governed by the interaction between the hydroxyl group of the BINOL unit and the C═C bond of the iso-propenyl fragment. The synthetic strategy used to prepare CBPPs opens many possibilities to place chiral centers such as BINOL in porous polymers for different chiral applications such as enantiomer recognition.

Color-Tunable Binary Copolymers Manipulated by Intramolecular Aggregation and Hydrogen Bonding

Construction of color-tunable luminescent polymeric materials with enhanced emission intensity and room-temperature phosphorescence (RTP) performance regulated by a single chromophore component is highly desirable in the scope of photoluminescent materials. Herein, a set of binary copolymers were facilely synthesized using free radical polymerization by selecting different types of polymer matrix and N-substituted naphthalimides (NPA) as chromophores. Surprisingly, the fluorescence emission of copolymers could be remarkably enhanced, because of the intramolecular aggregation of NPA manipulated by a single polymer chain in both solution and solid state. Moreover, RTP signals of binary copolymers were all clearly observed in the air without any processing procedure, because of the embedding of phosphors into hydrogen bonding networks after copolymerization with vinyl-based acrylamide monomers. Taking advantages of the synergistic effect of copolymerization-induced aggregation and copolymerization-induced rigidification to promote optical performance, UV stimulus-responsive luminescent polymer films with processability, flexibility, and adjustable emission wavelength were simply prepared using a drop-casting method in large scale, the setting of which is the basis for application in the fields of organic optoelectronics, information security, and bioimaging/sensing.

Construction of an ultra-small hydrazone-linked covalent organic polymer for selective fluorescent detection of ferric ion in aqueous solution

A novel ultra-small hydrazone-linked covalent organic polymer (UHCOP) was synthesized based on the Schiff-base reaction between 2,4,6-trihydroxy-1,3,5-benzenetricarbaldehyde and 1,4-benzenedicarbohydrazide at room temperature and utilized as a sensitive fluorescent sensor for rapid (<2 min) and selective detection of Fe³⁺ in aqueous solution. The prepared UHCOP displayed ultra-small size with the diameter of 7.98 ± 0.97 nm and gave a stable fluorescent emission at 510 nm. UHCOP exhibited good sensitivity and highly selectivity towards Fe³⁺. The coordination interaction between UHCOP and Fe³⁺ resulted in the obviously aggregation-caused quenching response of UHCOP. The linear range was from 5.0 μM to 1.4 mM (R² = 0.999) with the detection limit of 2.5 μM. Finally, UHCOP has been successfully applied in the detection of Fe³⁺ in real water samples, proving the fabricated UHCOP is promising as a sensitive fluorescent sensor for selective detection of Fe³⁺ in aqueous solution.

Fluorinated covalent organic frameworks for efficient drug delivery

In this study, two novel fluorine-functionalized crystalline covalent organic frameworks (COFs), namely DF-TAPB-COF and DF-TATB-COF, were synthesized, and their ordered structure, porosity, suitable pore size, and abundant fluorine groups were expected to serve as effective carriers in drug delivery. The excellent cell viability of DF-TAPB-COF and DF-TATB-COF was verified using MTT assays. Both COFs exhibited very high loading capacities in terms of drug loading performance, in particular the drug loading rate of DF-TAPB-COF for 5-fluorouracil (5-FU) was up to 69%. They also exhibited efficient drug release performance in a simulated body fluid environment. Cell endocytosis experiments demonstrated that DF-TAPB-COF and DF-TATB-COF could be effectively endocytosed by cells. Hence, this study offers new insight into the design and development of COF-based drug carrier systems.

Carbon dot-functionalized macroporous adsorption resin for bifunctional ultra-sensitive detection and fast removal of iron(III) ions

Heavy metal pollution has spread around the world with the development of industry, posing a major threat to human health. It is urgent to design and fabricate bifunctional materials for detection and adsorption of heavy metal ions. Herein, poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) microspheres, a kind of common macroporous adsorption resin (MAR), were employed as the matrix, and carbon dots (CDs) with excellent optical properties were grafted onto the surface of MAR by surface-initiated atom transfer radical polymerization (SI-ATRP) and photo-initiated "thiol-yne" click chemistry. The synthesized MAR@poly(PA)@CD could produce fluorescence quenching with Fe³⁺. A simple fluorescence spectrometric method for detection of Fe³⁺ was established. The fluorescence intensity of MAR@poly(PA)@CD decreased linearly with the concentration of Fe³⁺ in the range of 0-70 nmol L^-1, with a limit of detection (LOD) of 6.6 nmol L^-1, which had the potential for trace detection. In addition, after SI-ATRP modification, many adsorption sites were generated on the surface of MAR, and the adsorption capacity for Fe³⁺ was 23.8 mg g^-1. Isothermal and kinetic adsorption experiments were more consistent with the Langmuir model (r = 0.9992) and pseudo-second-order model (r = 0.9902), indicating that the adsorption was monolayer adsorption and chemical adsorption, respectively. MAR@poly(PA)@CD with dual functions of detecting and adsorbing Fe³⁺ was successfully prepared, showing great application prospects in the environmental field.

Derivatives of diphenylamine and benzothiadiazole in optoelectronic applications: a review

Light-emitting conjugated organic compounds have found special interest among researchers. Because of their adjustable optoelectronic properties they can be applied in e.g. field-effect transistors, sensors, light-emitting diodes or photovoltaic cells. In order to develop high-performance systems, it is important to understand the relationship between the structure and the photophysical properties of the material used. One of the employed strategies is to decrease the band gap of conjugated compounds, often achieved through a “donor–acceptor” approach. One of the popular groups applied as an electron-accepting unit are benzothiadiazoles, while diphenylamine exhibits good electron-donating ability. The functional groups can affect the energy levels of materials, influencing the color of the light emitted. This work presents a review of research focused on the structure-properties relationship of diphenylamine and benzothiadiazole derivatives with optoelectronic applications.

Cationic Covalent Organic Polymer Thin Film for Label-free Electrochemical Bacterial Cell Detection

Numerous species of bacteria pose a serious threat to human health and cause several million deaths annually. It is therefore essential to have quick, efficient, and easily operable methods of bacterial cell detection. Herein, we synthesize a novel cationic covalent organic polymer (COP) named CATN through the Menshutkin reaction and evaluate its potential as an impedance sensor for Escherichia coli cells. On account of its positive surface charge (ζ-potential = +21.0 mV) and pyridinium moieties, CATN is expected to interact favorably with bacteria that possess a negatively charged cell surface through electrostatic interactions. The interdigitated electrode arrays were coated with CATN using a simple yet non-traditional method of electrophoresis and then used in two-electrode electrochemical impedance spectroscopy (EIS) measurements. The impedance response showed a linear relationship with the increasing concentration of E. coli. The system was sensitive to bacterial concentrations as low as ∼30 CFU mL^-1, which is far below the concentration considered to cause illnesses. The calculated limit of detection was as low as 2 CFU mL^-1. This work is a rare example of a COP used in this type of bacteria sensing and is anticipated to stimulate further interest in the synthesis of organic polymers for EIS-based sensors.

Phototriggered Desorption of Hydrogen, Ethylene, and Carbon Monoxide from a Cu(I)-Modified Covalent Organic Framework

Materials that are capable of adsorbing and desorbing gases near ambient conditions are highly sought after for many applications in gas storage and separations. While the physisorption of typical gases to high surface area covalent organic frameworks (COFs) occurs through relatively weak intermolecular forces, the tunability of framework materials makes them promising candidates for tailoring gas sorption enthalpies. The incorporation of open Cu(I) sites into framework materials is a proven strategy to increase gas uptake closer to ambient conditions for gases that are capable of π-back-bonding with Cu. Here, we report the synthesis of a Cu(I)-loaded COF with subnanometer pores and a three-dimensional network morphology, namely Cu(I)-COF-301. This study focused on the sorption mechanisms of hydrogen, ethylene, and carbon monoxide with this material under ultrahigh vacuum using temperature-programmed desorption and Kissinger analyses of variable ramp rate measurements. All three gases desorb near or above room temperature under these conditions, with activation energies of desorption (E _des) calculated as approximately 29, 57, and 68 kJ/mol, for hydrogen, ethylene, and carbon monoxide, respectively. Despite these strong Cu(I)-gas interactions, this work demonstrated the ability to desorb each gas on-demand below its normal desorption temperature upon irradiation with ultraviolet (UV) light. While thermal imaging experiments indicate that bulk photothermal heating of the COF accounts for some of the photodriven desorption, density functional theory calculations reveal that binding enthalpies are systematically lowered in the COF-hydrogen matrix excited state initiated by UV irradiation, further contributing to gas desorption. This work represents a step toward the development of more practical ambient temperature storage and efficient regeneration of sorbents for applications with hydrogen and π-accepting gases through the use of external photostimuli.