Anthraquinone-based intramolecular charge-transfer compounds: computational molecular design, thermally activated delayed fluorescence, and highly efficient red electroluminescence

An A-D-A-Type Thermally Activated Delayed Fluorescence Emitter with Intrinsic Yellow Emission Realizing Record-High Red/NIR OLEDs upon Modulating Intermolecular Aggregations

Realizing efficient red/near-infrared (NIR) electroluminescence (EL) by precisely modulating molecular aggregations of thermally activated delayed fluorescence (TADF) emitters is an attractive pathway, yet the molecular designs are elusive. Here, a new approach is proposed to manage molecular aggregation via a mild-twist acceptor-donor-acceptor (A-D-A)-type molecular design. A proof-of-concept TADF molecule, QCN-PhSAC-QCN, is developed that furnishes a fast radiative rate and obvious aggregation-induced emission feature. Its emission bands can be facilely shifted from intrinsic yellow to the red/NIR region via fine-tuning doping levels and molecular aggregates while maintaining elegant photoluminescence quantum yields benefiting from suppressed exciton annihilation processes. As a result, a QCN-PhSAC-QCN-based organic light-emitting diode (OLED) exhibits a record-setting external quantum efficiency (EQE) of 39.1% at a doping ratio of 10 wt.%, peaking at 620 nm. Moreover, its nondoped NIR OLED affords a champion EQE of 14.3% at 711 nm and retains outstanding EQEs of 5.40% and 2.35% at current densities of 10 and 100 mA cm-2 , respectively, which are the highest values among all NIR-TADF OLEDs at similar density levels. This work validates the feasibility of such mild-twist A-D-A-type molecular design for precisely controlling molecular aggregation while maintaining high efficiency, thus providing a promising pathway for high-performance red/NIR TADF OLEDs.

Molecular Engineering Modulating the Singlet-Triplet Energy Splitting of Indolocarbazole-Based TADF Emitters Exhibiting AIE Properties for Nondoped Blue OLEDs with EQE of Nearly 20

The development of efficient blue thermally activated delayed fluorescence (TADF) emitters with an aggregation-induced emission (AIE) nature, for the construction of organic light-emitting diodes (OLEDs), is still insufficient. This can be attributed to the challenges encountered in molecular design, including the inherent trade-off between radiative decay and reverse intersystem crossing (RISC), as well as small singlet-triplet energy splitting (ΔEST) and the requirement for high photoluminescence quantum yields (ΦPL). Herein, we present the design of three highly efficient blue TADF molecules with AIE characteristics by combining π-extended donors with different acceptors to modulate the differences in the electron-donating and electron-withdrawing abilities. This approach not only ensures high emission efficiency by suppressing close π-π stacking, weakening nonradiative relaxation, and enhancing radiative transition but also maintains the equilibrium ratio between the triplet and singlet excitons by facilitating the process of RISC. These emitters exhibit AIE and TADF properties, featuring quick radiative rates and low nonradiative rates. The ΦPL of these emitters reached an impressive 88%. Based on their excellent comprehensive performance, nondoped PICzPMO and PICzPMO OLEDs achieved excellent electroluminescence performance, exhibiting maximum external quantum efficiency (EQEmax) of up to 19.5%, while the doped device achieved a higher EQEmax of 20.8%. This work demonstrated that by fusing π-extended large rigid donors with different acceptors, it is possible to regulate the difference in electron-donating and electron-withdrawing abilities, resulting in a small ΔEST, high ΦPL, and fast RISC process, which is a highly feasible strategy for designing efficient TADF molecules.

Theoretical Research and Photodynamic Simulation of Aggregation-Induced Thermally Activated Delayed Fluorescence Materials for Organic Light-Emitting Diodes

The discovery and utilization of pure organic thermally activated delayed fluorescence (TADF) materials provide a major breakthrough in obtaining high-performance and low-cost organic light-emitting diodes (OLEDs). In spite of recent research progress in TADF emitters, highly efficient and stable TADF emitters in high-concentration solutions and in the solid state have been rarely reported, and most of them suffer from aggregation-induced quenching (ACQ). To resolve this issue, the aggregation-induced delayed fluorescence (AIDF) mechanism was studied in depth by the simulation of excited-state dynamic processes, and the effect of geometric modifications on optical properties was minutely investigated based on molecular modeling. TD-DFT calculations demonstrate that it is the key point for the transformation between prompt fluorescence and TADF to effectively regulate singlet-triplet energy difference and electron-vibration coupling by the aggregation effect. Then, excellent green and red TADF materials with very small singlet-triplet energy differences of 0.05 and 0.06 eV, high TADF quantum yields up to 57.53% and 39.19%, and suitable fluorescence lifetimes of 0.99 and 1.67 us, respectively, were designed and obtained, which demonstrate the potential application of these two TADF materials in OLEDs.

Sulfone/Carbonyl-Based Donor-Acceptor Fluorescent Dyes: Synthesis, Structures, Photophysical Properties and Cell Imaging

Electron-accepting units play vital roles in constructing donor-acceptor (D-A) conjugated organic optoelectronic materials; the electronic structures and functions of the acceptors need to be carefully unveiled to controllably tailor the optoelectronic properties. We have synthesized two D-A conjugated organic fluorophores, TPA-SO and TPA-CO, with similar molecular skeletons based on sulfone- or carbonyl-containing polycyclic aromatic acceptors. Both TPA-SO and TPA-CO display obvious solvent polarity-dependent photophysical properties and large Stokes shift of over 100 nm for strong intramolecular charge transfer processes. Experimental evidence indicates that the sulfone group in TPA-SO merely serves as a strong electron-withdrawing unit. TPA-SO shows yellowish-green emission with a peak at 542 nm and an absolute photoluminescence quantum yield (PLQY) of 98 % in solution, whereas the carbonyl group in TPA-CO can act as both an electron-withdrawing unit and spin transition convertor, so TPA-CO displays red emission with a low absolute PLQY of 0.32 % in solution. Impressively, upon going from solution to aggregate state, TPA-SO nanoparticles keep a high PLQY of 9.5 % and moderate biocompatibility, thus they are good nano-agents for cellular fluorescence imaging. The results reveal that the inherent acceptor characteristic acts as a crucial effect in the photophysical properties and applications of the organic fluorophores.

Exploration of violet-to-blue thermally activated delayed fluorescence emitters based on "CH/N" and "H/CN" substitutions at diphenylsulphone acceptor. A DFT study

The violet-to-blue thermally activated delayed fluorescence (TADF) emitters were created employing several substituents based on 5,5-dimethyl-5,10-dihydropyrido [2,3-b][1,8] naphthyridine-diphenylsulphone (DMDHPN-DPS) called 1a via "CH/N" and "H/CN" substitutions at the diphenylsulphone acceptor (DPS) moiety. The parent compound 1a was selected from our former work after extensive research employing "CH/N" substitution on Dimethyl-acridine (DMAC) donor moiety. There is a little overlap amid the highest occupied molecular orbitals (HOMOs) and lowest un-occupied molecular orbitals (LUMOs) due to the distribution of HOMOs and LUMOs primarily on the DMDHPN donor and the DPS acceptor moieties, respectively. It resulted in a narrower energy gap (∆E ST) between the lowest singlet (S1) and triplet (T1) excited state. In nearly all derivatives, the steric hindrance results in a larger torsional angle (85°-98°) between the plane of the DMDHPN and the DPS moieties. The predicted ΔE ST values of the compounds with "H/CN" substitution were lower than those of the comparable "CH/N" substituents, demonstrating the superiority of the reversible inter-system crossing (RISC) from the T1 → S1 state. All derivatives have emission wavelengths (λ em) in the range of 357-449 nm. The LUMO → HOMO transition energies in the S1 states are lowered by the presence of -CN groups or -N = atoms at the ortho or meta sites of a DPS acceptor unit, causing the λ em values to red-shift. Furthermore, the λ em showed a greater red-shift as there were more-CN groups or -N = atoms. Three of the derivatives named 1b, 1g, and 1h, emit violet (394 nm, 399 nm, and 398 nm, respectively), while two others, 1f and 1i, emit blue shade (449 nm each) with reasonable emission intensity peak demonstrating that these derivatives are effective violet-to-blue TADF nominees. The lower ΔE ST value for derivative 1i (0.01 eV) with λ em values of 449 nm make this molecule the finest choice for blue TADF emitter amongst all the studied derivatives. We believe our research might lead to the development of more proficient blue TADF-OLEDs in the future.

Theoretical studies on thermally activated delayed fluorescence of "carbene-metal-amide" Cu and Au complexes: geometric structures, excitation characters, and mechanisms

"Carbene-metal(I)-amide" (CMA) complexes have garnered significant attention due to their remarkable properties and potential TADF applications in organic electronics. However, the atomistic working mechanism is still elusive. Herein, we chose two CMA complexes, i.e., cyclic (alkyl)(amino) carbene-copper[gold](I)-carbazole (CAAC-Cu[Au]-Cz), and employed both DFT and TD-DFT methods, in combination with radiative and nonradiative rate calculations, to investigate geometric and electronic structures of these two complexes in the ground and excited states, including orbital compositions, electronic transitions, absorption and emission spectra, and the luminescence mechanism. It is found that the coplanar or perpendicular conformations are coexistent in the ground state (S0), the lowest excited singlet state (S1), and the triplet state (T1). Both the coplanar and perpendicular S1 and T1 states have similar ligand-to-ligand charge transfer (LLCT) character between CAAC and Cz, and some charge-transfer character between metal atoms and ligands, which is beneficial to minimize the singlet-triplet energy gaps (ΔEST) and increase the spin-orbit coupling (SOC). An interesting three-state (S0, S1, T1) model involving two regions (coplanar and perpendicular) is proposed to rationalize the experimental TADF phenomena in the CMA complexes. In addition to the coplanar ones, the perpendicular S1 and T1 states also play a role in promoting the repopulation of the coplanar S1 exciton, which is a primary source for the delayed fluorescence.

Recent synthetic strategies for the construction of functionalized carbazoles and their heterocyclic motifs enabled by Lewis acids

This article demonstrates recent innovative cascade annulation methods for preparing functionalized carbazoles and their related polyaromatic heterocyclic compounds enabled by Lewis acid catalysts. Highly substituted carbazole scaffolds were synthesized via Lewis acid mediated Friedel-Crafts arylation, electrocyclization, intramolecular cyclization, cycloaddition, C-N bond-formations, aromatization and cascade domino reactions, metal-catalyzed, iodine catalyzed reactions and multi-component reactions. This review article mainly focuses on Lewis acid-mediated recent synthetic methods to access a variety of electron-rich and electron-poor functional groups substituted carbazole frameworks in one-pot reactions. Polyaromatic carbazole and their related nitrogen-based heterocyclic compounds were found in several synthetic applications in pharma industries, energy devices, and materials sciences. Moreover, the review paper briefly summarised new synthetic strategies of carbazole preparation approaches will assist academic and pharma industries in identifying innovative protocols for producing poly-functionalized carbazoles and related highly complex heterocyclic compounds and discovering active pharmaceutical drugs or carbazole-based alkaloids and natural products.

Thermally activated delayed fluorescence and high-contrast mechanochromism of anthrone-based donor-acceptor systems

The development of materials that emit in the deep-red to near-infrared region of the spectrum has attracted significant attention due to their potential as optical sensing and imaging reagents in biology. Herein, we report the synthesis and optoelectronic characterization of four anthraquinone-based emitters, T-tBuCz-AQ, T-MeOCz-AQ, C-tBuCz-AQ, and C-MeOCz-AQ, and two pyrazoloanthrone-based emitters, tBuCz-PA and DMAC-PA. Depending on the donor, these compounds emit in the spectral range between 640 and 750 nm in the neat film, while the emission of the 10 wt% doped films in poly(methyl methacrylate) (PMMA) is blue-shifted between 600 and 700 nm and has low photoluminescence quantum yields between 2.6% and 6.6%. Of these compounds, T-tBuCz-AQ, T-MeOCz-AQ, and C-tBuCz-AQ exhibited thermally activated delayed fluorescence (TADF) in 10 wt% doped films in PMMA, while the crystals of T-tBuCz-AQ also showed TADF. Compound tBuCz-PA showed a high-contrast and reversible photoluminescence (PL) response upon mechanical grinding and hexane fuming.

A Feasible Strategy for a Highly Efficient Thermally Activated Delayed Fluorescence Emitter Over 900 nm Based on Phenalenone Derivatives

Near-infrared (NIR) organic light-emitting diodes (OLEDs) suffer from the low external electroluminescence (EL) quantum efficiency (EQE), which is a critical obstacle for potential applications. Herein, 1-oxo-1-phenalene-2,3-dicarbonitrile (OPDC) is employed as an electron-withdrawing aromatic ring, and by incorporating with triphenylamine (TPA) and biphenylphenylamine (BBPA) donors, two novel NIR emitters with thermally activated delayed fluorescence (TADF) characteristics, namely OPDC-DTPA and OPDC-DBBPA, are first developed and compared in parallel. Intense NIR emission peaks at 962 and 1003 nm are observed in their pure films, respectively. Contributed by the local excited (LE) characteristics in the triplet (T1 ) state in synergy with the charge transfer (CT) characteristics for the singlet (S1 ) state to activate TADF emission, the solution processable doped NIR OLEDs based on OPDC-DTPA and OPDC-DBBPA yield EL peaks at 834 and 906 nm, accompanied with maximum EQEs of 0.457 and 0.103 %, respectively, representing the state-of-the-art EL performances in the TADF emitter-based NIR-OLEDs in the similar EL emission regions so far. This work manifests a simple and effective strategy for the development of NIR TADF emitters with long wavelength and efficiency synchronously.

Reverse Designing the Wavelength-Specific Thermally Activation Delayed Fluorescent Molecules Using a Genetic Algorithm Coupled with Cheap QM Methods

Genetic algorithm (GA) optimization coupled with the semiempirical intermediate neglect of differential overlap (INDO)/CIS method is presented to inversely design the red thermally activation delayed fluorescent (TADF) molecules. According to the predefined donor-acceptor (DA) library to build an AD_n-type TADF candidate, we utilized the chemical notation language SMILES code to generate a TADF molecule and apply the RDKit program to produce the initial 3D molecular structure. A combined fitness function is proposed to evaluate the performance of the functional-lead TADF molecule. The fitness function includes three key parameters, i.e., the emission wavelength, the energy gap (ΔE_ST) between the lowest singlet (S₁)- and triplet (T₁)-excited states, and the oscillator strengths for electron transition from S₀ and S₁. A cheap QM method, i.e., INDO/CIS, on the basis of an xTB-optimized molecular geometry is applied to quickly calculate the fitness function. Finally, the GA approach is utilized to globally search for the wavelength-specific TADF molecules under our predefined DA library, and the optimum 630 nm red and 660 nm deep red TADF molecules are inversely designed according to the evolution of molecular fitness functions.

Creation of Dual Thermally Activated Delayed-Fluorescence Exciplexes in a Bulk Emitting Layer and Its Interface with an Electron Transport Layer for Promoting the Performance of Thermally Activated Delayed-Fluorescence Organic Light-Emitting Diodes Fabricated by a Solution Process

An exciplex, which is composed of electron donor and acceptor molecules and formed by intermolecular charge transfer, is an excited-state species that is able to emit light or transfer its energy to a lower-energy emitter. In reported exciplex-based organic light-emitting diodes (OLEDs), their working mechanism is to generate exciplexes either in the bulk emitting layer (bulk exciplex) or at its interface with an electron transport layer (interface exciplex); both types give promising device performance. Here, we propose a novel strategy of creating both types of exciplexes simultaneously (dual exciplexes) for the generation of more exciplexes for better device performance as indicated in the improved photoluminescence quantum yield (PLQY). Impressively, the dual exciplex-based device with blue thermally activated delayed fluorescence (TADF) emitter 9,9-dimethyl-9,10-dihydroacridine-2,4,6-triphenyl-1,3,5-triazine (DMAC-TRZ) exhibits a record-high maximum external quantum efficiency (EQE_max) of 26.7% among the solution-processed TADF blue OLEDs. By further doping with the red-emitting phosphor emitter into the EML, the white device also gives a record-high EQE_max of 24.1% among the solution-processed TADF-phosphor hybrid white OLEDs (T-P WOLEDs) with the Commission Internationale de L'Eclairage (CIE) coordinates of (0.34, 0.42), color rendering index of 70, and correlated color temperature of 5198 K. Furthermore, both blue and white devices show an ultralow efficiency roll-off with external quantum efficiencies at a practical brightness value of 1000 cd m^-2 (EQE₁₀₀₀) of 25.1 and 23.9%, respectively. This is the first report of employing a dual exciplex-based OLED with excellent device performance.

Rational Molecular Design Strategy for Host Materials in Thermally Activated Delayed Fluorescence-OLEDs Suitable for Solution Processing

Herein, a novel core molecule for V-shaped host molecules was synthesized, wherein two carbazoles were directly linked to cyclohexane. Cy-mCP and Cy-mCBP hosts were also successfully prepared for solution-processable thermally activated delayed fluorescence organic light-emitting diodes (TADF-OLEDs). The Cy-mCP and Cy-mCBP molecules contained a cyclohexane linker directly linked to two small molecular hosts (mCP and mCBP), exhibiting twice the molecular weight while maintaining the basic properties of a single host molecule with improved film-forming ability and solubility in organic solvents. These host materials showed superior thermal stability and high glass transition temperatures compared to lower molecular weight hosts. Green TADF-OLEDs were prepared using the two host materials and 2,4,5,6-tetra(3,6-di-tert-butylcarbazol-9-yl)-1,3-dicyanobenzene (t4CzIPN) emitter, achieving device efficiencies similar to that of a low-molecular-weight host. However, after the incorporation of a V-shaped host, superior characteristics were observed in terms of the thermal stability and operational stability of the device. The synthesis of V-shaped molecules by directly linking two carbazoles to a cyclohexane linker is promising for the development of different hosts for solution-processable OLEDs.

One-Shot Construction of BN-Embedded Heptadecacene Framework Exhibiting Ultra-narrowband Green Thermally Activated Delayed Fluorescence

BN-embedded nonacene, tridecacene, and heptadecacene frameworks were constructed using one-shot quadruple, sextuple, and octuple borylation reactions, respectively. The key to success is the judicious choice of borylating reagents and long-chain alkyl-substituted carbazolyl groups as boron-trapping groups, which suppressed the decrease in HOMO energy and insolubilization associated with borylation. Based on the product yields, each electrophilic C-H borylation proceeded in >99% yield, which is the best efficiency reported so far for C-H borylation reactions. Owing to the multiple resonance effects of boron and nitrogen, the prepared acenes exhibited ultra-narrowband green thermally activated delayed fluorescence with full-width at half-maximum of 12-16 nm; moreover, their k_RISC values were in the order of 10⁵ s^-1. We fabricated an organic light-emitting diode by employing the nonacene as an emitter, which exhibited high external quantum efficiency (EQE) of 28.7%. The device also showed a minimum efficiency roll-off with an EQE of 25.8% at 1000 cd m^-2.

A Low-Cost Test Method for Accurate Detection of Different Excited-State Species with a Lifetime Span over 5 Orders of Magnitude in One Time Window

Accurate quantification on the quantum yields (φ) of both the prompt fluorescence (PF) and the delayed fluorescence (DF) species is quite essential for the clarification of molecular design rationales for thermally activated delayed fluorescence (TADF) luminogens. Currently, most φ_PF and φ_DF data of TADF fluorophores were acquired through time-correlated single-photon counting (TCSPC) lifetime measurement systems. However, because of their equal-time-channel working manner, so far all the commercially available TCSPC systems cannot render accurate measurement on φ_PF of TADF materials due to the lack of enough valid data points in the faster decay region of the corresponding photoluminescence (PL) decay curves. Although an intensified charge coupled device (ICCD) system equipped with a streak camera or an optical parametric oscillation laser has been proven to be a powerful tool for accurate determination of φ_PF and φ_DF of TADF fluorophores, the ultrahigh cost of these ICCD systems makes them inaccessible to most users. Herein, by replacing the timing module of a commercial TCSPC system with a low-cost and versatile time-to-digital converter (TDC) module, we developed a modified TCSPC system that can work in an unequal-time-channel manner. The resultant TDC-TCSPC system can not only concurrently determine the accurate lifetime of PF and DF species whose lifetime span even exceeds 5 orders of magnitude in just one time window but also render accurate measurements on φ_PF and φ_DF of TADF fluorophores. The reliability of the TDC-TCSPC method was verified through TCSPC- and ICCD-based comparative experiments on ACMPS, a known TADF fluorophore. Our results not only can provide a low-cost and convenient test method for accurate determination of key experimental data of TADF materials but also will facilitate deeper understanding of the molecular design principles for high-performance TADF materials.

Exploring the Influence of Engineering the Linker between the Donor and Acceptor Fragments on Thermally Activated Delayed Fluorescence Characteristics

We have expounded the unique molecular design architecture for efficient thermally activated delayed fluorescence (TADF) materials based on a donor-linker-acceptor-linker-donor (D-L-A-L-D) framework, which can be employed as predecessors of organic light-emitting diode (OLED) devices. Different from traditional donor-acceptor-type (D-A-type) TADF scaffolds, the D-L-A-L-D structural design avoids direct coupling amid the D and A fragments allowing the highest occupied molecular orbitals (HOMOs) and the lowest unoccupied molecular orbitals (LUMOs) to be spatially separated. It results in a reduced overlap between HOMOs and LUMOs, thus realizing fairly a slight singlet-triplet energy gap (ΔE _ST) and higher photoluminescence quantum yield (Φ). We revealed that manipulating a linker between D and A fragments in intramolecular charge transfer compounds is an auspicious approach for realizing small ΔE _ST. Herein, we report a group of organic electroluminescent D-L-A-L-D-type molecules with different electron-donating and electron-accepting moieties using density functional theory calculations and time-dependent density functional theory calculations. Two types of linkers, the π-conjugated phenylene (-C₆H₄-) and aliphatic alkyl chains or σ-spacer (-CH₂- and -CH₂-CH₂-), were exploited between D and A fragments. In principle, the conjugation in D-π-A-π-D-type molecules and hyperconjugation in D-σ-A-σ-D type molecules encourage the spatial separation of the HOMO-LUMO causing a reduction in the ΔE _ST. All the designed molecules show a blue-shift in the emission wavelengths (λ_em) over the directly linked parent molecules except DPA-DPS-C₆H₄ and BTPA-DPS-C₆H₄ which show a red-shift. Violet-blue to green-yellow (376-566 nm) λ_em was observed from all of the investigated molecules. Other important properties that affect the efficiency of emission quantum yields like frontier molecular orbital analysis, natural population analysis, electron excitation analysis, exciton binding energies, ionization potentials, electronic affinities, and reorganization energies of the designed molecules were also inspected. We are confident that our work will effectively give a straightforward and distinctive approach to building incredibly effective TADF-OLEDs and a new perspective on their structural design.

Synthesis of fluorescent chalcones, photophysical properties, quantitative structure-activity relationship and their biological application

The development of fluorescent pigments is an area of interest in several research fields due to their high sensitivity. In the current study-eight known and three new N,N-dimethylamino-chalcones (12a-k) were synthesized with good yields using the Claisen-Schmidt reaction. For each molecular system, the photophysical properties, including the maximum absorption wavelength (λ_Absorption), molar absorption coefficient (ε), maximum excitation wavelength (λ_Excitation), maximum emission wavelength (λ_Emission), Stokes Shift (Δλ), fluorescence quantum yield (Φ_fl), fluorescence lifetime (τ_fl), radiative and non-radiative rate constants (k_R and k_NR, respectively) were evaluated. Variations in each of these properties were analyzed depending on the substituents present on each compound. To relate the chemical structures of the synthesized compounds to their photophysical properties, Hansch analysis (2D-QSPR) was applied. As a result of Hansch analysis, we found different photophysical properties related to molecular orbitals and the energy of their derivatives (Highest Occupied Molecular Orbital-HOMO, Lowest Unoccupied Molecular Orbital-LUMO, Difference between LUMO-HOMO-ΔLH, Chemical potential-µ, Hardness-η, Softness-S, and electrophilic global index-ω) as well as to the atomic charges on atoms C₅, C_α, C_β, and CO. The application of this type of analysis has made it possible to understand and subsequently design new molecules with defined photophysical properties. Finally, the compounds were use as fluorescent pigment to get living cell imaging on breast cancer cells, obtaining the compound 12a as promissory alternative.

Design of Intramolecular Dihedral Angle between Electronic Donor and Acceptor in Thermally Activated Delayed Fluorescence Molecules

In order to improve the exciton utilization efficiency (η_exc) of organic light-emitting materials, we addressed the ideal donor-acceptor dihedral angle (θ_D-A) in the TADF molecule by striking a balance between two photophysical processes. One is the conversion of triplet excitons into singlet excitons, and the other is the radiative process from a low-lying excited state to the ground state. Using a combination of first-principles calculations and molecular dynamics simulations, we investigated the impact of θ_D-A on the splitting energy and spin-orbit coupling between singlet and triplet excitons as well as the transition dipole moment for carbazole benzonitrile (CzBN) derivatives. By comparison with the reverse intersystem crossing rate (k_rISC), fluorescence emission rate (k_r), and η_exc, we proposed a potential highest η_exc (of 94.4%) with the ideal θ_D-A of 77° for blue light CzBN derivatives; the calculated results have a good agreement with experimental measurement. The structure-efficiency physical connection between the molecular structure (θ_D-A) and efficiency provided an ideal parameter for a potential candidate for blue TADF-OLED materials.

Optical Amplification at 637 and 1067 nm Based on Organic Molecule AQ(PhDPA)2 and NdIII Complex Codoped Polymer Waveguides

Based on the molecular energy transfer mechanism, relative gains at 1067 and 637 nm wavelengths are achieved in thermally activated delayed fluorescence molecule AQ(PhDPA)₂ and Nd complex with chelating phosphine oxide as ligands codoped polymer waveguides, with the excitation of low-power UV light-emitting diodes (LEDs) instead of traditional semiconductor lasers as pump sources. For AQ(PhDPA)₂ -Nd(DBTTA)₃ (DBFDPO) (DBTTA = dibenzotetrathienoacene, DBFDPO = 4,6-bis (diphenylphosphoryl) dibenzofuran) -codoped polymethylmethacrylate (PMMA), and AQ(PhDPA)₂ -Nd(DBTTA)₃ (FDPO) (FDPO = 9,9-bis (diphenylphosphorylphenyl) fluorene)-codoped PMMA polymers with a mass ratio of 1:4 respectively, when they are spin-coated as upper claddings, the relative gains of 2.2 and 1.8 dB cm^-1 at 1067 nm are obtained in evanescent-field waveguides with cross-section of 4 × 8 µm² under excitation of 300 mW 405 nm LED, and the gains of 3.9 and 4.9 dB cm^-1 at 637 nm are achieved with pumping of 530 mW 450 nm LED respectively. By growing a 100 nm-thick aluminum reflector with the waveguides, the optical gain at 1067 and 637 nm can be enhanced to 3.5 and 6.1 dB cm^-1 , corresponding to AQ(PhDPA)₂ -Nd(DBTTA)₃ (DBFDPO) and AQ(PhDPA)₂ -Nd(DBTTA)₃ (FDPO)-codoped PMMA polymers, respectively.

Impact of π-Expanded Boron-Carbonyl Hybrid Acceptors on TADF Properties: Controlling Local Triplet Excited States and Unusual Emission Tuning

Three donor-acceptor-type thermally activated delayed fluorescence (TADF) emitters (PXZBAO (1), PXZBTO (2), and PXZBPO (3)) comprising a phenoxazine (PXZ) donor and differently π-expanded boron-carbonyl (BCO) hybrid acceptor units are proposed. The emitters exhibit red (1) to orange (3) emissions with an increase in the π-expansion in the BCO acceptors. The control of the strength of local aromaticity for the BCO unit and the corresponding LUMO level is attributed to inducing the unusual emission color shifts. The photoluminescence quantum yield and delayed fluorescence lifetime of the emitters are also adjusted by the π-expansion. Notably, although 1 possesses a ³nπ* state in the acceptor unit as a local triplet excited state (³LE, T₂), the T₂ states of 2 and 3 mainly comprise a ³ππ* state in the acceptor. Consequently, all of the emitters exhibit strong spin-orbit coupling between their T₂ and excited singlet (S₁) states, leading to a fast reverse intersystem crossing with rate constants of ∼10⁶ s^-1. By employing the emitters as dopants, we realize efficient red-to-orange TADF-OLEDs. Maximum external quantum efficiencies of 17.7% for the yellowish-orange (3), 15.5% for the orange (2), and 13.9% for the red (1) devices are achieved, and the values are very close to the theoretical limit predicted from the optical simulation.

Spiroborate-Based Host Materials with High Triplet Energies and Ambipolar Charge-Transport Properties

Organic light-emitting diodes (OLEDs) receive considerable attention because of their commercial use in flat panel displays. Herein, highly efficient spiroborate-based host materials are reported for use in blue OLEDs. Our designed spiroborates (SBOX) were simple to synthesize and exhibited high triplet excitation energies, narrow S-T gaps, and balanced charge carrier mobilities. A blue OLED containing one of the designed spiroborates, SBON, as a host exhibited a high external quantum efficiency (27.6 %) and low turn-on voltage (3.7 V) compared to those observed using 3,3'-di(9H-carbazol-9-yl)-1,1'-biphenyl (17.6 % and 4.5 V, respectively), indicating their potential as host materials in OLEDs.

Thermally Activated Long Persistent Luminescence of Organic Inorganic Metal Halides

Long persistent luminescence (LPL) materials of SrAl₂ O₄ doped with Eu²⁺ or Dy³⁺ can maintain emission over hours after ceasing the excitation but suffer from insolubility, high cost, and harsh preparation. Recently, organic LPL of guest-host exciplex systems has been demonstrated via an intermediate charge-separated state with flexible design but poor air-stability. Here, we synthesized a nontoxic two-dimensional organic-inorganic metal hybrid halides (OIMHs), called PBA₂ [ZnX₄ ] with X=Br or Cl and PBA=4-phenylbenzylamine. These materials exhibit stable LPL emission over minutes at room-temperature, which is two orders of magnitude longer than those of previously reported OIMHs. The mechanism study shows that the LPL emission comes from thermally activated charge separation state rather than room-temperature phosphorescence. Moreover, the LPL of PBA₂ [ZnX₄ ] can be excited by low power sources, representing an effective strategy for developing low-cost and high-stability LPL systems.

Theoretical study on thermally activated delayed fluorescent molecules based on space charge transfer

Thermally Activated Delayed Fluorescent (TADF) molecules with through-space charge transfer (TSCT) have broad application potential in organic light-emitting diodes. In this paper, five TPA-ace based molecules with different electron-withdrawing groups and TSCT property are investigated using polarizable continuum model (PCM) combined with density functional theory (DFT) and time-dependent functional theory (TD-DFT) in Methylcyclohexane, Toluene and Dichloromethane. It is found that stronger electron-withdrawing ability of acceptors could induce redshift of emission and smaller energy gap between the first singlet excited state (S₁) and the first triplet excited state (ΔE_ST). The ratio of TSCT to through bond charge transfer (TBCT) for S₁ of TPA-ace-TRZ is calculated quantitatively, which further confirmed the TSCT character of TPA-ace-TRZ. The TADF property is also analyzed based on the calculation of spin-orbit coupling and the (reverse) intersystem crossing rates between S₁ and T₁. Our calculation results would favor the understanding of TSCT-TADF.

Solution-Processed Pure Red TADF Organic Light-Emitting Diodes With High External Quantum Efficiency and Saturated Red Emission Color

In spite of recent research progress in red thermally activated delayed fluorescence (TADF) emitters, highly efficient solution-processable pure red TADF emitters are rarely reported. Most of the red TADF emitters reported to date are designed using a rigid acceptor unit which renders them insoluble and unsuitable for solution-processed organic light-emitting diodes (OLEDs). To resolve this issue, a novel TADF emitter, 6,7-bis(4-(bis(4-(tert-butyl)phenyl)amino)phenyl)-2,3-bis(4-(tert-butyl)phenyl)quinoxaline-5,8-dicarbonitrile (tBuTPA-CNQx) is designed and synthesized. The highly twisted donor-acceptor architecture and appropriate highest occupied molecular orbital/lowest unoccupied molecular orbital distribution lead to a very small singlet-triplet energy gap of 0.07 eV, high photoluminescence quantum yield of 92%, and short delayed fluorescence lifetime of 52.4 µs. The peripheral t-butyl phenyl decorated quinoxaline acceptor unit and t-butyl protected triphenylamine donor unit are proven to be useful building blocks to improve solubility and minimize the intermolecular interaction. The solution-processed OLED based on tBuTPA-CNQx achieves a high external quantum efficiency (EQE) of 16.7% with a pure red emission peak at 662 nm, which is one of the highest EQE values reported till date in the solution-processed pure red TADF OLEDs. Additionally, vacuum-processable OLED based on tBuTPA-CNQx exhibits a high EQE of 22.2% and negligible efficiency roll-off.

Sequential Multiple Borylation Toward an Ultrapure Green Thermally Activated Delayed Fluorescence Material

Multiple-resonance thermally activated delayed fluorescence (MR-TADF) emitters have emerged as an important component of organic light-emitting diodes (OLEDs) because of their narrowband emission and high exciton utilization efficiency. However, the chemical space of MR-TADF emitters remains mostly unexplored because of the lack of suitable synthetic protocols. Herein, we demonstrate a sequential multiple borylation reaction that provides new synthetically accessible chemical space. ω-DABNA, the proof-of-concept material, exhibited narrowband green TADF with a full width at half-maximum of 22 nm and a small singlet-triplet energy gap of 13 meV. The OLED employing it as an emitter exhibited electroluminescence at 512 nm, with Commission International de l'Éclairage coordinates of (0.13, 0.73) and a high external quantum efficiency (EQE) of 31.1%. Moreover, the device showed minimum efficiency roll-off, with an EQE of 29.4% at 1000 cd m^-2.

Hyperbranched Conjugated Polymer with Multiple Charge Transfer Enables High-Efficiency Nondoped Red Electroluminescence with Low Driving Voltage

Conjugated polymers featuring thermally activated delayed fluorescence (TADF) attract tremendous attention in both academic and industry communities due to their easy solution processing for fabricating large-area and low-cost high-performance polymer light-emitting diodes (PLEDs). However, current nondoped solution-processed PLEDs frequently encounter significant efficiency roll-offs and unreasonably high operating voltages at high brightness, especially for red-emitting polymers. Herein, we design hyperbranched conjugated polymers (HCPs) with D-A-D type TADF characteristics for high-performance red-emitting PLEDs. Multiple intramolecular charge transfer (ICT) channels induced by quasi-equivalent donors of the TADF core strongly boost the reverse intersystem crossing (RISC) process and singlet excitons radiative transition. Coupling with the efficient energy transfer process generated by structure advantages of HCPs, the strongly electron-withdrawing oxygen atoms located on the TADF cores further accelerate hole transportation from the host chains to the TADF cores. Under a rational regulation of the TADF core ratio, the related nondoped red-emitting device performs an outstanding performance with an EQE_max of 8.39% and exhibits no roll-off while the luminance is less than 100 cd/m² and only 3.3% decrease at 500 cd/m². Simultaneously, the EQE can maintain 7.4% under 1000 cd/m². Furthermore, the corresponding nondoped device exhibits a low turn-on voltage of around 2.5 V and achieves a luminance of 500 cd/m² at 3.5 V and even 1000 cd/m² at 3.9 V. To our knowledge, this is the best performance among all nondoped red PLEDs with high brightness obtained at low operating voltage.

Carbonyl-Containing Thermally Activated Delayed Fluorescence Emitters for Narrow-Band Electroluminescence

Carbonyl-containing derivatives show enduring vitality in the field of thermally activated delayed fluorescence (TADF) materials; they can realize high device efficiency by using both singlet and triplet excitons for electroluminescence. Recently, a system based on fused ketone/amine exhibited huge potential for constructing multi-resonance TADF (MR-TADF) emitters, which exhibit higher narrow-band emission than conventional TADF emitters with twisted donor-acceptor (D-A) structure. Herein, we summarize current research progress in both traditional and MR-type ketone derivatives with TADF characteristics for introducing the molecular design strategy of maintaining high device efficiency while keeping narrow-band emission profile. We hope this review can inspire the emergence of more high-performance narrow-band materials.

Albumin-Consolidated AIEgens for Boosting Glioma and Cerebrovascular NIR-II Fluorescence Imaging

The application of an exogenous polymer matrix to construct aggregation-induced emission (AIE) nanoprobes promotes the utility of AIE luminogens (AIEgens) in diagnosing brain diseases. However, the limited fluorescence (FL) and low active-targeting abilities of AIE-based nanoprobes impede their imaging application. Here, we employed endogenous albumin as an effective matrix to encapsulate AIEgens to enhance FL quantum yield (QY) and active-targeting ability. The albumin-consolidated strategy effectively inhibited the intramolecular vibration of AIEgens and enhanced endocytosis mediated by the gp60 receptor. The QYs of three kinds of albumin-based AIE nanoprobes with FL emissions ranging from the visible (400-650 nm) to the second near-infrared (NIR-II, 1000-1700 nm) region was at least 10% higher, and the tumor-targeting efficiency was ∼25% higher, compared with those of nanoprobes constructed by the exogenous polymer. Albumin-based AIE nanoprobes have achieved active-targeting NIR-II imaging of brain tumors and cerebrovascular imaging with a high signal-to-background ratio (SBR, ∼90) and high resolution (∼70 μm) in mouse models. Therefore, the albumin-based AIE nanoprobes will enable FL imaging-guided surgery of brain tumors and cerebral ischemia, which will improve surgical efficacy to prevent recurrence and side effects.

Controllable construction of red thermally activated delayed fluorescence molecules based on a spiro-acridine donor

Red and near-infrared (NIR) thermally activated delayed fluorescence (TADF) molecules show excellent potential applications in organic light-emitting diodes (OLEDs). Due to the lack of systematic studies on the relationship between molecular structures and luminescence properties, both the species and amounts of red and NIR TADF molecules are far from meeting the requirements for practical applications. Herein, four new efficient molecules (DQCN-2spAs, TPCN-2spAs, DPCN-2spAs and BPCN-2spAs) are proposed and their photophysical properties are theoretically predicted based on first-principles calculations and thermal vibration correlation function (TVCF) theory. The results show that all molecules exhibit red or NIR emissions and they have fast radiative decay rates and reverse intersystem crossing (RISC) rates, and the excellent TADF luminescence properties are predicted. Moreover, based on spiro-acridine (spAs) as the donor unit, the combination with different acceptors can change the dihedral angle between the ground state and the excited state, the bending degree of the donor is positively correlated with the reorganization energy, and this feature can have a great influence on the non-radiative process. Furthermore, based on these theoretical predictions, experimental verifications are performed and the synthesized BPCN-2spAs is confirmed to be an efficient NIR TADF molecule. Thus, the relationships between basic molecular structures and photophysical properties are revealed, a feasible design strategy is applied and four promising red and NIR TADF molecules are proposed. All these results could contribute to the development of red and NIR TADF emitters and OLEDs.

Progress in the Development of Imidazopyridine-Based Fluorescent Probes for Diverse Applications

Different classes of Imidazopyridine i.e., Imidazo[1,2-a]pyridine, Imidazo[1,5-a] pyridine, Imidazo[4,5-b]pyridine, have shown versatile applications in various fields. In this review, we have concisely presented the usefulness of the fluorescent property of imidazopyridine in different fields such as imaging tools, optoelectronics, metal ion detection, etc. Fluorescence mechanisms such as excited state intramolecular proton transfer, photoinduced electron transfer, fluorescence resonance energy transfer, intramolecular charge transfer, etc. are incorporated in the designed fluorophore to make it for fluorescent applications. It has been widely employed for metal ion detection, where selective metal ion detection is possible with triazole-attached imidazopyridine, β-carboline imidazopyridine hybrid, quinoline conjugated imidazopyridine, and many more. Also, other popular applications involve organic light emitting diodes and cell imaging. This review shed a light on recent development in this area especially focusing on the optical properties of the molecules with their usage which would be helpful in designing application-based new imidazopyridine derivatives.

Optimal Dihedral Angle in Twisted Donor-Acceptor Organic Emitters for Maximized Thermally Activated Delayed Fluorescence

The twisted donor-acceptor (D-A) organic formwork with a large dihedral angle (θ_DA ) is usually adopted to narrow the singlet-triplet energy gap for obtaining excellent thermally activated delayed fluorescence (TADF) emitters. However, the dependence of overall TADF properties on θ_DA has not been systematically investigated to this day. Taking new designed CzBP, CzBP-1M and CzBP-2M via introducing methyl as investigated models, it is found that (i) with increasing θ_DA , the charge transfer component in S₁ is larger than that in T₁ in varying degrees, leading to non-monotonic spin-orbit couplings; (ii) the electron-vibration couplings between S₁ and T₁ states become the largest when θ_DA approaching 80°, facilitating phonon-driven up-conversion; (iii) the overall TADF rate reaches a peak at θ_DA ≈80°. By this, the TADF on/off switching is realized via methyl moiety for regulating θ_DA from theoretical prediction to experimental confirmation. Importantly, the θ_DA near 80° would be a good descriptor for screening excellent D-A type TADF emitters.

Ultra-Narrowband Blue Multi-Resonance Thermally Activated Delayed Fluorescence Materials

Ultra-narrowband blue multi-resonance-induced thermally activated delayed fluorescence (MR-TADF) materials (V-DABNA and V-DABNA-F), consisting of three DABNA subunits possessing phenyl or 2,6-difluorophenyl substituents on the peripheral nitrogen atoms are synthesized by one-shot triple borylation. Benefiting from the inductive effect of fluorine atoms, the emission maximum of V-DABNA-F (464 nm) is blueshifted from that of the parent V-DABNA (481 nm), while maintaining a small full width at half maximum (FWHM, 16 nm) and a high rate constant for reverse intersystem crossing (6.5 × 105 s-1 ). The organic light-emitting diodes (OLEDs) using V-DABNA and V-DABNA-F as emitters are fabricated by vapor deposition and exhibit blue emission at 483 and 468 nm with small FWHMs of 17 and 15 nm, corresponding to Commission Internationale d'Éclairage coordinates of (0.09, 0.27) and (0.12, 0.10), respectively. Both devices achieve high external quantum efficiencies of 26.2% and 26.6% at the maximum with minimum efficiency roll-offs of 0.9% and 3.2%, respectively, even at 1000 cd m-2 , which are record-setting values for blue MR-TADF OLEDs.

Efficient thermally activated delayed fluorescence organic light-emitting device based on an exciplex

An exciplex with significant thermally activated delayed fluorescence properties was realized, comprising diphenyl-[3'-(1-phenyl-1H-phenanthro[9,10-d]imidazol-2-yl)-biphenyl-4-yl]-amine as a donor and 2,4,6-tris[3-(diphenylphosphinyl)phenyl]-1,3,5-triazine as an acceptor. A very small energy difference between the singlet and triplet levels and a large rate constant of the reverse intersystem crossing were attained simultaneously, contributing to the efficient upconversion of triplet excitons from the triplet state to the singlet state and thermally activated delayed fluorescence emission. A high-efficiency organic light-emitting device based on the exciplex was fabricated, which exhibited a maximum current efficiency, power efficiency, external quantum efficiency, and exciton utilization efficiency of 23.1 cd/A, 24.2 lm/W, 7.32%, and 54%, respectively. The efficiency roll-off of the exciplex-based device was slight, as illustrated by a large critical current density of 34.1 mA/cm². This efficiency roll-off was ascribed to triplet-triplet annihilation, as confirmed by the triplet-triplet annihilation model. We proved the high binding energy of the excitons and excellent charge confinement within the exciplex by performing transient electroluminescence measurements.

Donor-Acceptor Type of Fused-Ring Thermally Activated Delayed Fluorescence Compounds Constructed through an Oxygen-Containing Six-Membered Ring

Nowadays, thermally activated delayed fluorescence (TADF) compounds with a fused-ring core skeleton are getting increasing research interest because of their use in high-performance organic light-emitting diodes (OLEDs). In this study, TADF compounds featuring a D-A-type fused-ring core skeleton are developed. The challenging compatibility of a planarized D-A arrangement and the TADF property is achieved through linking the D and A moieties with two oxygen atoms within a six-membered ring. Compared with a single-oxygen analogue possessing a flexible skeleton and a twisted D-A arrangement, these fused-ring compounds with higher skeleton rigidity show higher photoluminescence quantum yields and narrower emission spectra in toluene and in doped thin films. Their electroluminescent devices achieve high external quantum efficiencies (up to 19.4%), suggesting the potential of rarely achieved D-A-type fused-ring TADF systems to serve as high-performance emitters of OLEDs.

Alkaline Earth Metal-Organic Frameworks Based on Tetratopic Anthraquinone-Based Linkers: Synthesis, Characterization, and Photochemical Applications

A tetratopic bis(diphenylamino)anthraquinone linker is presented, and its physicochemical properties are evaluated. The linker is shown to successfully coordinate alkaline earth metals leading to four new reported metal-organic frameworks (MOFs), which have been fully characterized, including single-crystal X-ray diffraction. The physicochemical and emissive properties of the MOF materials are investigated and compared to those of the uncoordinated ligand. Finally, the catalytic behavior of the ligand and the MOF materials toward the photooxidation of sulfides is described.

Lighting up Micro-/Nanorobots with Fluorescence

Micro-/nanorobots (MNRs) can be autonomously propelled on demand in complex biological environments and thus may bring revolutionary changes to biomedicines. Fluorescence has been widely used in real-time imaging, chemo-/biosensing, and photo-(chemo-) therapy. The integration of MNRs with fluorescence generates fluorescent MNRs with unique advantages of optical trackability, on-the-fly environmental sensitivity, and targeting chemo-/photon-induced cytotoxicity. This review provides an up-to-date overview of fluorescent MNRs. After the highlighted elucidation about MNRs of various propulsion mechanisms and the introductory information on fluorescence with emphasis on the fluorescent mechanisms and materials, we systematically illustrate the design and preparation strategies to integrate MNRs with fluorescent substances and their biomedical applications in imaging-guided drug delivery, intelligent on-the-fly sensing and photo-(chemo-) therapy. In the end, we summarize the main challenges and provide an outlook on the future directions of fluorescent MNRs. This work is expected to attract and inspire researchers from different communities to advance the creation and practical application of fluorescent MNRs on a broad horizon.

A Chiral Dual-Core Organoboron Structure Realizes Dual-Channel Enhanced Ultrapure Blue Emission and Highly Efficient Circularly Polarized Electroluminescence

The realization of luminescent materials with narrowband and circularly polarized luminescence (CPL) is of great significance for the development of future optical and photonic devices. Herein, through a steric-hindrance-assisted dual-core strategy, two pairs of chiral dual-core multiple resonance thermally activated delayed fluorescence (MR-TADF) materials (R/S-DOBN and R/S-DOBNT) are directly constructed by the bonding of two organoboron MR-TADF monocores (SOBN and SOBNT) with carbazole/3,6-di-tert-butyl-9H-carbazole and phenol derivative as donors, realizing obvious CPL and narrowband emissions. Furthermore, the dual-core effect in the prepared R/S-DOBN and R/S-DOBNT increases the transition oscillator strength two times more than that of a monocore structure, while maintaining the ultrapure blue emissions peaking at 453 and 459 nm with a narrower full-width at half-maximum of 21 nm through reorganization energy reduction. The circularly polarized organic light-emitting diodes based on the enantiomers exhibit ultrapure blue emission with Commission Internationale de L'Eclairage (CIE) coordinates of (0.14, 0.10) and (0.13, 0.12), high maximum external quantum efficiencies of 23.9% and 25.6%, and obvious circularly polarized electroluminescence with dissymmetry factors (|g_EL |) ≈ 10^-3 .

Highly Efficient Sky-Blue π-Stacked Thermally Activated Delayed Fluorescence Emitter with Multi-Stimulus Response Properties

Organic materials with multi-stimulus response (MSR) properties have demonstrated many potential and practical applications. Herein, a π-stacked thermally activated delayed fluorescence (TADF) material with multi-stimulus response (MSR) properties, named SDMAC, was designed and synthesized using distorted 9,9-dimethyl-10-phenyl-9,10-dihydroacridine as a donor. SDMAC possesses a rigid π-stacked configuration with intramolecular through-space interactions and exhibits aggregation-induced emission enhancement (AIEE), solvatochromic, piezochromic, and circularly polarized luminescence (CPL) under different external stimuli. The rigid molecular structure and efficient TADF properties of SDMAC can be used in displays and lighting. Using SDMAC as an emitter, the maximum external quantum efficiency (EQE) of the fabricated organic light-emitting diodes (OLEDs) is as high as 28.4 %, which make them the most efficient CP-TADF OLEDs based on the through-space charge transfer strategy. The CP organic light-emitting diodes (CP-OLEDs) exhibit circularly polarized electroluminescence (CPEL) signals.

Distinctive Excited State Symmetry Breaking Dynamics in Typical Donor-Acceptor-Donor Fluorophore: Strong Photoluminescence and Ultrafast Charge Separation from a Partial Charge Transfer State

Understanding the structure-property relationships in organic semiconductors is crucial for controlling their photophysical properties and developing new optoelectronic materials. Quadrupolar molecules, donor-acceptor-donor (DAD), have attracted extensive attention in various optoelectronic applications. However, the systematic studies on the differences on photophysical properties between DAD and simple donor-acceptor (DA) chromophores are rarely reported. Herein we present a comparative study on the excited state dynamics of DA and DAD fluorescence systems using theoretical calculation and transient absorption spectroscopy. Results show that DA and DAD molecules exhibit similar excited state dynamics, which are attributed to the distinctive excited-state symmetry breaking (ESSB) phenomenon observed in a DAD system. The strong photoluminescence (PL) and ultrafast charge separation (CS) from an ESSB-induced partial charge transfer (CT) state were clearly detected in different solvent environments. These results not only offer insight into the excited state dynamics of the DAD fluorescence system but also provide some basic guidelines for designing new optoelectronic materials.

NIR TADF emitters and OLEDs: challenges, progress, and perspectives

Near-infrared (NIR) light-emitting materials show excellent potential applications in the fields of military technology, bioimaging, optical communication, organic light-emitting diodes (OLEDs), etc. Recently, thermally activated delayed fluorescence (TADF) emitters have made historic developments in the field of OLEDs. These metal-free materials are more attractive because of efficient reverse intersystem crossing processes which result in promising high efficiencies in OLEDs. However, the development of NIR TADF emitters has progressed at a relatively slower pace which could be ascribed to the difficult promotion of external quantum efficiencies. Thus, increasing attention has been paid to NIR TADF emitters. In this review, the recent progress of NIR TADF emitters has been summarized along with their molecular design strategies and photophysical properties, as well as electroluminescence performance data of their OLEDs, respectively.

Development of Pure Green Thermally Activated Delayed Fluorescence Material by Cyano Substitution

Multiple resonance (MR)-effect-induced thermally activated delayed fluorescence (TADF) materials have garnered significant attention because they can achieve both high color purity and high external quantum efficiency (EQE). However, the reported green-emitting MR-TADF materials exhibit broader emission compared to those of blue-emitting ones and suffer from severe efficiency roll-off due to insufficient rate constants of reverse intersystem crossing process (k_RISC ). Herein, a pure green MR-TADF material (ν-DABNA-CN-Me) with high k_RISC of 10⁵ s^-1 is reported. The key to success is introduction of cyano groups into a blue-emitting MR-TADF material (ν-DABNA), which causes remarkable bathochromic shift without a loss of color purity. The organic light-emitting diode employing it as an emitter exhibits green emission at 504 nm with a small full-width at half-maximum of 23 nm, corresponding to Commission Internationale d'Éclairage coordinates of (0.13, 0.65). The device achieves a high maximum EQE of 31.9% and successfully suppresses the efficiency roll-off at a high luminance.

Oxalamide/Amide Ligands: Enhanced and Copper-Catalyzed C-N Cross-Coupling for Triarylamine Synthesis

Triarylamines are privileged core structures that are found in versatile optoelectronic materials. New methods are constantly being sought for their preparation. Herein, a new protocol for triarylamine synthesis is presented where a wide range of diarylamines couple smoothly with aryl bromides mediated by a copper oxalamide (or amide) catalytic system. Notably, a new non-C₂-symmetric 1-isoquinolinamide-based N,N-/N,O-bidentate ligand was introduced that could tolerate bulky diarylamines. Plenty of known optoelectronic functional molecules could be synthesized in good to excellent yields. The practicality of this C-N cross-coupling was illustrated by the gram-scale synthesis of a patented thermally activated delayed fluorescence emitter for organic light-emitting diodes.