Nanoparticle technology in bone tissue engineering

Synthesis and characterization of surface-modified PBLG nanoparticles for bone targeting: in vitro and in vivo evaluations

In this study, poly(γ-benzyl-l-glutamate) (PBLG) polypeptide derivatives were synthesized by ring-opening polymerization of amino acid N-carboxyanhydride using selected amine-terminated initiators. Alendronate, a targeting moiety that has a strong affinity for bone, was conjugated to PBLG. Monomethoxy polyethylene glycol (PEG) was used for a hydrophilic layer on the surface of the nanoparticles (NPs) to avoid reticuloendothelial system uptake. NPs were prepared by nanoprecipitation technique not only for PBLG or PBLG-PEG but also for composite polymers with different ratios. Fluorescein isothiocyanate would be attached to the NPs as a labeling agent. The size and morphology of NPs were evaluated by dynamic laser light scattering and transmission electron microscopy, and were found to be in a useful range (less than 80 nm) for bone-targeted drug delivery. In addition, the PEGylation of NPs was supported by isothermal titration calorimetry analysis. The bone-targeting potential of NPs was evaluated in vitro by calcium binding and hydroxyapatite affinity assays, and in vivo by fluorescent imaging experiments on rats. The targeted NPs showed bright fluorescent labeling in femur tissue. These results demonstrated the possibility of optimized NPs prepared with new PBLG derivatives to accumulate in bone successfully.

A novel nanoparticle-enhanced photoacoustic stimulus for bone tissue engineering

In this study, we introduce a novel nanoparticle-enhanced biophysical stimulus based on the photoacoustic (PA) effect. We demonstrate that the PA effect differentiates bone marrow-derived marrow stromal cells (MSCs) grown on poly(lactic-co-glycolic acid) (PLGA) polymer films toward osteoblasts. We further show that the osteodifferentiation of the MSCs due to PA stimulation is significantly enhanced by the presence of single-walled carbon nanotubes (SWCNTs) in the polymer. MSCs, without the osteogenic culture supplements (0.01 M β-glycerophosphate, 50 mg/L ascorbic acid, 10(-8) M dexamethasone), were seeded onto plain glass slides, glass slides coated with PLGA, or glass slides coated with SWCNT-PLGA films and photoacoustically stimulated by a 527 nm Nd:YLF pulse laser, with a 200 ns pulse duration, and 10 Hz pulse frequency for 10 min a day for 15 consecutive days. The study had four control groups; three baseline controls similar to the three experimental groups but without PA stimulation, and one positive control where MSCs were grown on glass slides without PA stimulation but with osteogenic culture supplements. The osteogenic differentiation of all the groups was evaluated using quantitative assays (alkaline phosphatase, calcium, osteopontin) and qualitative staining (alizarin red). After 15 days, the PA stimulated groups showed up to a 350% increase in calcium content when compared with the non-PA stimulated positive control. Further, within the PA stimulated group, the PLGA-SWCNT group had 130% higher calcium values than the PLGA film without SWCNTs. These results were further corroborated by the analysis of osteopontin secretion, alkaline phosphatase expression, and qualitative alizarin red staining of extracellular matrix calcification. The results indicate that PA stimulation holds promise for bone tissue engineering and that the nanomaterials which enhance the PA effect should allow the development of biophysical rather than biochemical strategies to induce osteoinductive properties into tissue engineering scaffolds.

Stereolithographic bone scaffold design parameters: osteogenic differentiation and signal expression

Scaffold design parameters including porosity, pore size, interconnectivity, and mechanical properties have a significant influence on osteogenic signal expression and differentiation. This review evaluates the influence of each of these parameters and then discusses the ability of stereolithography (SLA) to be used to tailor scaffold design to optimize these parameters. Scaffold porosity and pore size affect osteogenic cell signaling and ultimately in vivo bone tissue growth. Alternatively, scaffold interconnectivity has a great influence on in vivo bone growth but little work has been done to determine if interconnectivity causes changes in signaling levels. Osteogenic cell signaling could be also influenced by scaffold mechanical properties such as scaffold rigidity and dynamic relationships between the cells and their extracellular matrix. With knowledge of the effects of these parameters on cellular functions, an optimal tissue engineering scaffold can be designed, but a proper technology must exist to produce this design to specification in a repeatable manner. SLA has been shown to be capable of fabricating scaffolds with controlled architecture and micrometer-level resolution. Surgical implantation of these scaffolds is a promising clinical treatment for successful bone regeneration. By applying knowledge of how scaffold parameters influence osteogenic cell signaling to scaffold manufacturing using SLA, tissue engineers may move closer to creating the optimal tissue engineering scaffold.

Real time, nanometric 3D-tracking of nanoparticles made possible by second harmonic generation digital holographic microscopy

In the past decade, quantitative phase imaging gave a new dimension to optical microscopy, and the recent extension of digital holography techniques to nonlinear microscopy appears very promising, for the phase of nonlinear signal provides additional information, inaccessible to incoherent imaging schemes. In this work, we show that the position of second harmonic generation (SHG) emitters can be determined from their respective phase, at the nanometer scale, with single-shot off-axis digital holography, making possible real-time nanometric 3D-tracking of SHG emitters such as nanoparticles.

Development of new chitosan/carrageenan nanoparticles for drug delivery applications

The use of polymeric nanoparticles, especially those composed of natural polymers, has become a very interesting approach in drug delivery, mainly because of the advantages offered by their small dimensions. The aim of this work was to develop a novel formulation of nanoparticles comprised of two natural marine-derived polymers, namely chitosan and carrageenan, and to evaluate their potential for the association and controlled release of macromolecules. Nanoparticles were obtained in a hydrophilic environment, under very mild conditions, avoiding the use of organic solvents or other aggressive technologies for their preparation. The developed nanocarriers presented sizes within 350-650 nm and positive zeta potentials of 50-60 mV. Polymeric interactions between nanoparticles' components were evaluated by Fourier transform infrared spectroscopy. Using ovalbumin as model protein, nanoparticles evidenced loading capacity varying from 4% to 17% and demonstrated excellent capacity to provide a controlled release for up to 3 weeks. Furthermore, nanoparticles have demonstrated to exhibit a noncytotoxic behavior in biological in vitro tests performed using L929 fibroblasts, which is critical regarding the biocompatibility of those carriers. In summary, the developed chitosan-carrageenan nanoparticles have shown promising properties to be used as carriers of therapeutic macromolecules, with potential application not only strictly in drug delivery, but also in broader areas, such as tissue engineering and regenerative medicine.

Nanofibrous composites for tissue engineering applications

Development of artificial matrices for tissue engineering is a crucial area of research in the field of regenerative medicine. Successful tissue scaffolds, in analogy with the natural mammalian extracellular matrix (ECM), are multi-component, fibrous, and on the nanoscale. In addition, to this key morphology, artificial scaffolds must have mechanical, chemical, surface, and electrical properties that match the ECM or basement membrane of the specific tissue desired. In particular, these material properties may vary significantly for the four primary tissues in the body: nerve, muscle, epithelial, and connective. In order to address this complex array of attributes with a polymeric material, a nanocomposite approach, employing a blend of materials, addition of a particle to enhance particular properties, or a surface treatment, is likely to be required. In this review, we examine nanocomposite approaches to address these diverse needs as a function of tissue type. The review is intended as a bridge between material scientists and biomedical researchers to give basic background information on tissue biology to the former, and on material processing approaches to the latter, in a general manner, and specifically review fibrous nanocomposite materials that have previously been used for cell studies, either in vivo or in vitro.

Nanotechnology and bone healing

Nanotechnology and its attendant techniques have yet to make a significant impact on the science of bone healing. However, the potential benefits are immediately obvious with the result that hundreds of researchers and firms are performing the basic research needed to mature this nascent, yet soon to be fruitful niche. Together with genomics and proteomics, and combined with tissue engineering, this is the new face of orthopaedic technology. The concepts that orthopaedic surgeons recognize are fabrication processes that have resulted in porous implant substrates as bone defect augmentation and medication-carrier devices. However, there are dozens of applications in orthopaedic traumatology and bone healing for nanometer-sized entities, structures, surfaces, and devices with characteristic lengths ranging from 10s of nanometers to a few micrometers. Examples include scaffolds, delivery mechanisms, controlled modification of surface topography and composition, and biomicroelectromechanical systems. We review the basic science, clinical implications, and early applications of the nanotechnology revolution and emphasize the rich possibilities that exist at the crossover region between micro- and nanotechnology for developing new treatments for bone healing.

Bone morphogenetic proteins and tissue engineering: future directions

As long as bone repair and regeneration is considered as a complex clinical condition, the administration of more than one factor involved in fracture healing might be necessary. The effectiveness or not of bone morphogenetic proteins (BMPs) in association with other growth factors and with mesenchymal stem cells in bone regeneration for fracture healing and bone allograft integration is of great interest to the scientific community. In this study we point out possible future developments in BMPs, concerning research and clinical applications.

Complexity in biomaterials for tissue engineering

The molecular and physical information coded within the extracellular milieu is informing the development of a new generation of biomaterials for tissue engineering. Several powerful extracellular influences have already found their way into cell-instructive scaffolds, while others remain largely unexplored. Yet for commercial success tissue engineering products must be not only efficacious but also cost-effective, introducing a potential dichotomy between the need for sophistication and ease of production. This is spurring interest in recreating extracellular influences in simplified forms, from the reduction of biopolymers into short functional domains, to the use of basic chemistries to manipulate cell fate. In the future these exciting developments are likely to help reconcile the clinical and commercial pressures on tissue engineering.

Nanoparticulate systems for growth factor delivery

The field of nanotechnology, which aims to control and utilize matter generally in 1-100 nm range, has been at the forefront of pharmaceutical development. Nanoparticulate delivery systems, with their potential to control drug release profiles, prolonging the presence of drugs in circulation, and to target drugs to a specific site, hold tremendous promise as delivery strategies for therapeutics. Growth factors are endogenous polypeptides that initiate intracellular signals to regulate cellular activities, such as proliferation, migration and differentiation. With improved understanding of their roles in physiopathology and expansion of their availability through recombinant technologies, growth factors are becoming leading therapeutic candidates for tissue engineering approaches. However, the outcome of growth factor therapeutics largely depends on the mode of their delivery due to their rapid degradation in vivo, and non-specific distribution after systemic administration. In order to overcome these impediments, nanoparticulate delivery systems are being harnessed for spatiotemporal controlled delivery of growth factors. This review presents recent advances and some disadvantages of various nanoparticulate systems designed for effective intact growth factor delivery. The therapeutic applications of growth factors delivered by such systems are reviewed, especially for bone, skin and nerve regeneration as well as angiogenesis. Finally, future challenges and directions in the field are presented in addition to the current limitations.

Combining chemistry and biology to create colloidally stable bionanohydroxyapatite particles: toward load-bearing bone applications

This study presents a layer by layer assembly on nanohydroxyapatite (nHA) particles with the dual aim of enhancing particle dispersion and biological response to produce superior reinforcements intended for load-bearing applications. The system tested consists of three sequential biological polyelectrolyte layers of heparin (representing glycosaminoglycans), polyhistidine (representing growth factors), and heparin adsorbed onto nHA. The results reveal that the resulting bio-nHA particles with an outer heparin layer are colloidally stable in aqueous solution for 23 days. Adsorption isotherms combined with Ca(2+) release studies allowed a detailed description of each adsorbed layer. Release patterns for each adsorbed layer reveal that the biological polyelectrolytes are, at least in part, released as polyelectrolyte complexes. In conclusion, the combination of its colloidal dispersant properties and osteoinductive potential make the developed bio-nHA particles promising reinforcements to improve current composite biomaterials or bone-engineering scaffolds toward load-bearing dental and orthopedic applications.