Comparative Study of Early Secondary Nasal Revisions and Costs in Patients With Clefts Treated With and Without Nasoalveolar Molding

Quality-of-Life in Children with Orofacial Clefts and Caregiver Well-being

Quality of life is a valid patient-reported parameter that provides an assessment of treatment need or outcomes complementary to standard clinical measures. Such patient-reported assessments are particularly salient when examining chronic conditions with prolonged treatment trajectories, such as cleft lip and palate. This critical review identifies key questions related to ongoing research on the oral health-related quality of life (OHRQoL) in children with cleft and caregiver well-being. Details of the design and results from 2 longitudinal multicenter studies are presented. This article also provides an update on recent published reports regarding OHRQoL in individuals with cleft. Methodological issues in OHRQoL research are discussed, including condition-specific versus generic instruments, incorporating positive items in OHRQoL instruments, calculating minimally important differences in OHRQoL, implementing mixed methods design, and utilizing validated short assessment forms in OHRQoL research. Finally, new directions for research in cleft as a chronic condition are identified and discussed.

Correlation between Nasoalveolar Molding and Surgical, Aesthetic, Functional and Socioeconomic Outcomes Following Primary Repair Surgery: a Systematic Review

OBJECTIVES

The authors performed a systematic review to evaluate the potential beneficial effects of the nasoalveolar molding appliance on nonsyndromic unilateral clefts of the lip and/or palate prior to primary lip repair.

MATERIAL AND METHODS

A literature search was performed using three electronic databases (PubMed, Embase, Web of Science) and three journals ("Cleft Palate-Craniofacial Journal", "Plastic and Reconstructive Surgery Journal" and "American Journal of Orthodontics and Dentofacial Orthopaedic") from January 1980 to April 2017. Data extraction was performed with tables treating different subjects: surgical, aesthetical, functional, socio-economical effects of nasoalveolar molding (NAM) appliances and the evolution of NAM appliances, especially three-dimensional technology.

RESULTS

Of the 145 articles retrieved in the literature surveys, 28 were qualified for the final analysis and 20 studies were excluded because of their small sample size (less than 10 patients) and/or too long follow-up (exceeded 18 months). Four randomized controlled trials were available. Although literature allowed discussing the short-term benefits of NAM appliance and the three-dimensional technology, scientific evidence is lacking.

CONCLUSIONS

Based on the results, nasoalveolar molding appliances have positive surgical, aesthetical, functional and socio-economical effects on unilateral clefts of the lip and/or palate treatment before the primary repair surgeries. Three-dimensional technology results in a more efficient and predictable nasoalveolar molding appliance treatment. However, nasoalveolar molding appliance effect in a short term remains unclear with the available literature. Further studies that integrate three-dimensional technology in a large scale are still needed.

Early Cleft Lip Repair Revisited: A Safe and Effective Approach Utilizing a Multidisciplinary Protocol

Background:

The optimal timing for cleft lip repair has yet to be established. Advances in neonatal anesthesia, along with a growing body of literature, suggesting benefits of earlier cleft lip and nasal repair, have set the stage for a reexamination of current practices.

Methods:

In this prospective study, cleft lip and nasal repair occurred on average at 34.8 days (13–69 days). Nasal correction was achieved primarily through molding the nasal cartilage without the placement of nasal sutures at the time of repair. A standardized anesthetic protocol aimed at limiting neurotoxicity was utilized in all cases. Anesthetic and postoperative complications were assessed. A 3-dimensional nasal analysis compared pre- and postoperative nasal symmetry for unilateral clefts. Surveys assessed familial response to repair.

Results:

Thirty-two patients were included (27 unilateral and 5 bilateral clefts). In this study, the overall complication rate was 3.1%. Anthropometric measurements taken from 3-dimensional-image models showed statistically significant improvement in ratios of nostril height (preoperative mean, 0.59; postoperative mean, 0.80), nasal base width (preoperative mean, 1.96; postoperative mean, 1.12), columella length (preoperative mean, 0.62; postoperative mean, 0.89; and columella angle (preoperative mean, 30.73; postoperative mean, 9.1). Survey data indicated that families uniformly preferred earlier repair.

Conclusions:

We present evidence that early cleft lip and nasal repair can be performed safely and is effective at improving nasal symmetry without the placement of any nasal sutures. Utilization of this protocol has the potential to be a paradigm shift in the treatment of cleft lip and nasal deformity.

Orthodontic management of patients with cleft lip and palate

The management of patients with cleft lip and cleft palate requires prolonged orthodontic and surgical treatment and an interdisciplinary approach in providing them with optimal esthetics, function, and stability. This paper describes an update on the current concepts and principles in the treatment of patients with cleft lip and palate. Sequencing and timing of orthodontic/orthopedic and surgical treatment in infancy, early mixed dentition, early permanent dentition, and after the completion of facial growth will be discussed.

Automated detection of alveolar arches for nasoalveolar molding in cleft lip and palate treatment

Nasoalveolar moulding (NAM) has become a widely accepted and evidence-based treatment strategy for newborns with cleft lip and palate (CLP), attempting to reduce the cleft gap and to form an appropriately shaped alveolar arch by an intraoral patient-specific NAM plate and to erect the usually flattened nostrils towards a natural nose wing occurrence. The generation of such an appropriately shaped NAM plate requires, besides 3d information of the patient’s initially cleft lip and palate, an estimated target model of the maxilla. Previous studies showed the applicability of curve-based approaches to describe the maxilla during early infancy. We have developed an automated algorithm implemented with the programming language Python, describing the alveolar arch by an approximated ellipse. Therefore, the digitalized data sets of human maxillae were aligned to a global coordinate system with a total least square method and subsequently analyzed with the curvature-based algebraic point set surfaces (APSS) algorithm. The gathered information of height ratio and curvature allows the detection of points on the alveolar segments and therewith the fit of an ellipse describing the human maxilla. In 84.5% of 193 maxilla impressions of healthy newborns the fitted ellipses described the course of the maxilla within defined margins. Applying the algorithm to 38 newborns suffering from unilateral cleft lip and palate in 76.3% the fitted ellipses bridge the CLP alveolar segments, so that a harmonic alveolar arch can be deduced. Describing the alveolar arch by one or multiple ellipses allows (i) to automatically measure the dimensions of the maxilla, (ii) to derive a growth model during early infancy, (iii) to derive a healthy harmonic arch from CLP alveolar segments and (iv) to automatically generate a basic NAM device on the basis of the virtually modified maxilla.

Pitfalls and solutions in virtual design of nasoalveolar molding plates by using CAD/CAM technology--A preliminary clinical study

PURPOSE

Computer-assisted design and computer-aided manufacturing (CAD/CAM) technology in nasoalveolar molding (NAM) should save time and manpower and reduce family input in cases of cleft lip and palate.

MATERIAL AND METHODS

Intraoral casts from 12 infants with complete unilateral cleft lip and palate were taken immediately after birth (T1) and after (T2) NAM treatment, digitalized, and transformed into STL data. The infants were randomized into Group 1 (n = 6) receiving conventional NAM treatment or Group 2 receiving CAD/CAM NAM (n = 6). We analyzed the following variables by using Geomagic software: intersegmental alveolar distance (ISAD); intersegmental lip distance (ISLD); nostril height cleft/noncleft (NHc/nc); nasal width cleft/noncleft (NWn/nc); and columella deviation angle (CDA).

RESULTS

In both groups, all variables except NHnc and NWnc were changed significantly between T1 and T2. The analysis of the mean differences of the variables in Group 1 and 2 showed no significant differences, with a comparable incidence of clinical alterations such as skin or mucosal irritations.

CONCLUSION

NAM plates can be produced virtually by using CAD/CAM technology. The CAD/CAM NAM results show no significant differences from the conventional technique. We present our clinically usable virtual CAD/CAM workflow for producing a basic NAM plate.