Integron-bearing methicillin-resistant coagulase-negative staphylococci in South China, 2001–2004

Pathogenic features and characteristics of food borne pathogens biofilm: Biomass, viability and matrix

Biofilm is a ubiquitous growth pattern of bacterial species survival but is notorious for its threat on public health and food contamination. Extensive studies of the biofilm structure, formation, quantification, quorum sensing system and underlying control strategies have been reported during the past decades. Insightful elucidation of the pathogenic features and characteristic of bacterial biofilm can facilitate in devising appropriate control strategies for biofilm eradication. Therefore, this review mainly summarized the pathogenic features of biofilms from food borne microorganisms, including the biomass (which could be quantified using crystal violet and fluorogenic dye Syto9 assays), viability (which could be determined by tetrazolium salts, fluorescein diacetate, resazurin staining and alamar blue assays) and matrix (which are commonly detected by dimethyl methylene blue and wheat germ agglutinin assays). In addition, three features were further compared with its particular benefits in specific application.

Study on spoilage capability and VBNC state formation and recovery of Lactobacillus plantarum

OBJECTIVE

The present study aimed at investigating the capability of L. plantarum strain BM-LP14723 to enter into and recover from the viable but nonculturable (VBNC) state and to cause beer spoilage.

METHODS

VBNC state was induced by incubating in beer with subculturing or low temperature treatment. Culturable, total, and viable cells numbers were assessed by MRS agar plate counting, acridine orange direct counting, and Live/Dead BacLight bacterial viability kit, respectively. Organic acids concentrations were measured by reversed-phase high performance liquid chromatography.

RESULTS

VBNC L. plantarum cells were detected after 189 ± 1.9 days low temperature treatment or 29 ± 0.7 subcultures in beer. The VBNC L. plantarum retained spoilage capability. Addition of catalase is an effective method for the recovery of the VBNC L. plantarum cells.

CONCLUSION

L. plantarum strain BM-LP14723 is capable of entering into and recovery from the VBNC state and maintained spoilage capability. The current study presented that beer-spoilage L. plantarum can hide both in breweries and during transporting and marketing process and thus lead to beer-spoilage incidents.

Direct bacterial loop-mediated isothermal amplification detection on the pathogenic features of the nosocomial pathogen - Methicillin resistant Staphylococcus aureus strains with respiratory origins

Loop-mediated isothermal amplification based detection assays using bacterial culture or colony for direct detection of methicillin resistant Staphylococcus aureus(MRSA) had been developed and evaluated, followed by its extensive application on a large scale of clinical MRSA isolated from respiratory origins, including nasal swabs and sputums. Six primers, including outer primers, inner primers and loop primers, were specifically designed for recognizing eight distinct sequences on four targets: 16SrRNA, femA, mecA and orfX. Twenty-seven reference strains were used to develop, evaluate and optimize this assay. Then, a total of 532 clinical MRSA isolates were employed for each detected targets. And the results were determined through both visual observation of the color change by naked eye and electrophoresis. The specific of each primer had been confirmed, and the optimal amplification was obtained under 65 °C for 40 min. The limit of detections (LOD) of bacteria culture LAMP assays were determined to be 10⁴ CFU/ml for 16S rRNA, femA, as well as orfX and 10⁵ CFU/ml for mecA, respectively. The established novel assays on MRSA detection may provide new strategies for rapid detection of foodborne pathogens.

Complete genome sequence and bioinformatics analyses of Bacillus thuringiensis strain BM-BT15426

OBJECTIVES

This study aimed to investigate the genetic characteristics of Bacillus thuringiensis strain BM-BT15426.

METHODS

B. thuringiensis strain was identified by sequencing the PCR product (amplifying 16S rRNA gene) using ABI Prism 377 DNA Sequencer. The genome was sequenced using PacBio RS II sequencers and assembled de novo using HGAP. Also, further genome annotation was performed.

RESULTS

The genome of B. thuringiensis strain BM-BT15426 has a length of 5,246,329 bp and contains 5409 predicted genes with an average G + C content of 35.40%. Three genes were involved in the "Infectious diseases: Amoebiasis" pathway. A total of 21 virulence factors and 9 antibiotic resistant genes were identified.

CONCLUSIONS

The major pathogenic factors of B. thuringiensis strain BM-BT15426 were identified through complete genome sequencing and bioinformatics analyses which contributes to further study on pathogenic mechanism and phenotype of B. thuringiensis.

Detection on integron carried gene cassettes from pathogens by loop mediated isothermal amplification assays

In this study, a number of frequently detected gene cassettes from bacterial integrons have been detected and characterized by rapid and simple loop-mediated isothermal amplification (LAMP) assays. Six gene cassettes commonly found in class 1 integrons were studied, including dfrA12, dfrA17, aadA2, aadA5, orfF, and bla_VIM2. Primers design, sensitivity, specificity, optimization of each LAMP assay, as well as application of the developed 6 individual LAMP assays on a large scale of bacteria, had been conducted. The optimal amplification was obtained with temperature as 65 °C, reaction time span as 45 min and volume as 25 μl. For application, 272 isolates with various gene cassettes yielded expectable positive amplicons and other 685 integron-negative bacteria showed negative results for the LAMP assays, totaling 100% detection rate and specificity.

First study on the formation and resuscitation of viable but nonculturable state and beer spoilage capability of Lactobacillus lindneri

OBJECTIVES

This study aimed to investigate the spoilage capability of Lactobacillus lindneri during the induction and resuscitation of viable but nonculturable (VBNC) state.

METHODS

L. lindneri strain was identified by sequencing the PCR product (amplifying 16S rRNA gene) using ABI Prism 377 DNA Sequencer. During the VBNC state induction by low temperature storage and beer adaption, total, culturable, and viable cells were assessed by acridine orange direct counting, plate counting, and Live/Dead BacLight bacterial viability kit, respectively. Organic acids and diacetyl concentration were measured by reversed-phase high performance liquid chromatography and head dpace gas chromatography, respectively.

RESULTS

VBNC state of L. lindneri was successfully induced by both beer adaption and low temperature storage, and glycerol frozen stock was the optimal way to maintain the VBNC state. Addition of catalase was found to be an effective method for the resuscitation of VBNC L. lindneri cells. Furthermore, spoilage capability remained similar during the induction and resuscitation of VBNC L. lindneri.

CONCLUSIONS

This is the first report of induction by low temperature storage and resuscitation of VBNC L. lindneri strain, as well as the first identification of spoilage capability of VBNC and resuscitated L. lindneri cells. This study indicated that the potential colonization of L. lindneri strain in brewery environment, formation and resuscitation of VBNC state, as well as maintenance in beer spoilage capability, may be an important risk factor for brewery environment.

Loop-mediated isothermal amplification (LAMP): A novel rapid detection platform for pathogens

Foodborne bacterial infections and diseases have been considered to be a major threat for public health in the worldwide. Increased incidence of human diseases caused by foodborne pathogens have been correlated with growing world population and mobility. Loop-mediated isothermal amplification (LAMP) has been regarded as an innovative gene amplification technology and emerged as an alternative to PCR-based methodologies in both clinical laboratory and food safety testing. Nowadays, LAMP has been applied to detection and identification on pathogens from microbial diseases, as it showed significant advantage in high sensitivity, specificity and rapidity. The high sensitivity of LAMP enables detection of the pathogens in sample materials even without time consuming sample preparation. An overview of LAMP mainly containing the development history, reaction principle and its application to four kind of foodborne pathogens detection are presented in this paper. As concluded, with the advantages of rapidity, simplicity, sensitivity, specificity and robustness, LAMP is capable of applications for clinical diagnosis as well as surveillance of infection diseases. Moreover, the main purpose of this paper is to provide theoretical basis for the clinical application of LAMP technology.

Current methodologies on genotyping for nosocomial pathogen methicillin-resistant Staphylococcus aureus (MRSA)

Methicillin-resistant Staphylococcus aureus (MRSA) is a common pathogen in hospitals and the community. As the rapid spread and wide distribution of antimicrobial resistance (such as MRSA), treatment for infectious diseases caused by microorganisms has become a vital threat. Thus, early identification and genotyping are essential for further therapeutic treatment and the control of rapid expansion of MRSA. In combination with applications and data feedbacks, this review focused on the currently available molecular-based assays on their utility and performance for rapid typing of MRSA, especially on effective molecular-based methods. Besides, a common mobile element SCCmec and prevalence of HA-MRSA, LA-MRSA and CA-MRSA were introduced in this review in order to provide a more complete profile of MRSA.

Detection of Integrons and Staphylococcal Cassette Chromosome mec Types in Clinical Methicillin-resistant Coagulase Negative Staphylococci Strains

Objectives

Integrons are thought to play an important role in the spread of antibiotic resistance. This study investigates class 1 and 2 integron-positive methicillin-resistant coagulase-negative staphylococci strains isolated in Iran and characterizes their patterns of antimicrobial resistance.

Methods

Hundred clinical isolates of coagulase-negative staphylococci were characterized for integron content and staphylococcal cassette chromosome mec (SCCmec) type.

Results

Sixteen isolates carried class 1 (intI1) integrons and four isolates carried class 2 (intI2) integrons. One resistance gene array was identified among the class 1 integrons (aadA1 cassette). The distribution of SCCmec types in 50 methicillin-resistant coagulase-negative staphylococci strains showed that SCCmec types III and V dominated among the tested strains.

Conclusion

This is the first report of methicillin-resistant coagulase-negative staphylococci strains that carry two mobile genetic elements, including class 1 and 2 integrons and SCCmec, in Iran.

PMA-LAMP for rapid detection of Escherichia coli and shiga toxins from viable but non-culturable state

In exposure to outer pressure, microorganisms are capable of entry into the Viable But Non-Culturable (VBNC) state, and thus survive under various elimination processing. The survival microorganisms may yield negative results on culturing, and cause false negative for this golden standard methodology. In this study, a novel PMA-LAMP assay on the detection of Enterohemorrhage E. coli and shiga toxins has been developed and evaluated, with further application on a number of food borne E. coli strains. LAMP primers were designed on the target of rfbe for Enterohemorrhage E. coli and stx1with stx2 for shiga toxins. Via specific penetration through the damaged cell membrane of dead cells and intercalating into DNA, PMA could prevent DNA amplification of dead bacteria from LAMP, which enabled the differentiation of bacteria between VBNC state and dead state. The established PMA-LAMP showed significant advantage in rapidity, sensitivity and specificity, compared with regular PCR assay. The applicability had also been verified, demonstrating the PMA-LAMP was capable of detection on Enterohemorrhage E. coli and shiga toxins.

Direct detection of various pathogens by loop-mediated isothermal amplification assays on bacterial culture and bacterial colony

In this work, loop-mediated isothermal amplification based detection assay using bacterial culture and bacterial colony for various common pathogens direct detection had been established, evaluated and further applied. A total of five species of common pathogens and nine detection targets (tlh, tdh and trh for V. Parahaemolyticus, rfbE, stx1 and stx2 for E. coli, oprI for P. aeruginosa, invA for Salmonella and hylA for L. monocytogenes) were performed on bacterial culture and bacterial colony LAMP. To evaluate and optimize this assay, a total of 116 standard strains were included. Then, for each detected targets, 20 random selected strains were applied. Results were determined through both visual observation of the changed color by naked eye and electrophoresis, which increased the accuracy of survey. The minimum adding quantity of each primer had been confirmed, and the optimal amplification was obtained under 65 °C for 45 min with 25 μl reaction volume. The detection limit of bacterial culture LAMP and PCR assay were determined to be 10² and 10⁴ or 10⁵ CFU/reaction, respectively. No false positive amplification was observed when subjecting the bacterial -LAMP assay to 116 reference strains. This was the first report of colony-LAMP and culture-LAMP assay, which had been demonstrated to be a fast, reliable, cost-effective and simple method on detection of various common pathogens.

SCCmec-associated psm-mec mRNA promotes Staphylococcus epidermidis biofilm formation

Biofilm formation is considered the major pathogenic mechanism of Staphylococcus epidermidis-associated nosocomial infections. Reports have shown that SCCmec-associated psm-mec regulated methicillin-resistant Staphylococcus aureus virulence and biofilm formation. However, the role of psm-mec in S. epidermidis remains unclear. To this purpose, we analysed 165 clinical isolates of S. epidermidis to study the distribution, mutation and expression of psm-mec and the relationship between this gene and biofilm formation. Next, we constructed three psm-mec deletion mutants, one psm-mec transgene expression strain (p221) and two psm-mec point mutant strains (pM, pAG) to explore its effects on S. epidermidis biofilm formation. Then, the amount of biofilm formation, extracellular DNA (eDNA) and Triton X-100-induced autolysis of the constructed strains was measured. Results of psm-mec deletion and transgene expression showed that the gene regulated S. epidermidis biofilm formation. Compared with the control strains, the ability to form biofilm, Triton X-100-induced autolysis and the amount of eDNA increased in the p221 strain and the two psm-mec mutants pM and pAG expressed psm-mec mRNA without its protein, whereas no differences were observed among the three constructed strains, illustrating that psm-mec mRNA promoted S. epidermidis biofilm formation through up-regulation of bacterial autolysis and the release of eDNA. Our results reveal that acquisition of psm-mec promotes S. epidermidis biofilm formation.

Characterization of integrons and novel cassette arrays in bacteria from clinical isloates in China, 2000-2014

Rapid dissemination of antibiotic resistance genes among bacterial isolates is an increasing problem in China. Integron, a conserved DNA sequence, which is carried on episomal genetic structures, plays a very important role in development of antibiotic resistance. This systematic analysis was based on MEDLINE and EMBASE databases. We summarized the distribution and proportion of different types of gene cassette arrays of integrons (including class 1, 2, 3 and atypical class 1 integron) from clinical bacteria isolates in China. Fifty-six literatures were included in this study. Most of the strains were Gram-negative bacteria (94.1%, 7,364/7,822) while only 5.9% strains were Gram-positive bacteria. Class 1 integrons were detected in 54.2% (3956/7295) Gram-negative strains. aadA2 was the most popular gene cassette array detected from 60 Gram-positive bacteria while dfrA17-aadA5 were detected in 426 Gram-negative bacteria. This study identified 12 novel gene cassette arrays which have not been previously found in any species. All the novel gene cassette arrays were detected from Gram-negative bacteria. A regional characteristic of distribution of integrons was presented in this study. The results highlight a need for continuous surveillance of integrons and provide a guide for future research on integron-mediated bacteria resistance.

Resistance integrons: class 1, 2 and 3 integrons

As recently indiscriminate abuse of existing antibiotics in both clinical and veterinary treatment leads to proliferation of antibiotic resistance in microbes and poses a dilemma for the future treatment of such bacterial infection, antimicrobial resistance has been considered to be one of the currently leading concerns in global public health, and reported to widely spread and extended to a large variety of microorganisms. In China, as one of the currently worst areas for antibiotics abuse, the annual prescription of antibiotics, including both clinical and veterinary treatment, has approaching 140 gram per person and been roughly estimated to be 10 times higher than that in the United Kingdom, which is considered to be a potential area for the emergence of “Super Bugs”. Based on the integrons surveillance in Guangzhou, China in the past decade, this review thus aimed at summarizing the role of integrons in the perspective of both clinical setting and environment, with the focus on the occurrence and prevalence of class 1, 2 and 3 integrons.

Variability in gene cassette patterns of class 1 and 2 integrons associated with multi drug resistance patterns in Staphylococcus aureus clinical isolates in Tehran-Iran

BACKGROUND

To investigate antibiotic resistance, the occurrence and distribution of class 1 and 2 integrons in multidrug- resistant Staphylococcus aureus isolates from hospitals in Tehran, Iran. The isolates were examined for susceptibility to antimicrobial agents. The mecA gene, class 1 and 2 integrons were detected by PCR. Integrase positive strains were further analysed for the presence of resistance gene cassettes using specific primers and were sequenced.

RESULTS

Among 139 S.aureus isolates, 109 (78.4 %) and 112 (80.5 %) strains were considered as multidrug resistant and mecA positive, respectively. Class 1 integrons and internal variable regions were found in 72.6 % (101/139) and 97 % (98/101) and class 2 integrons and variable regions also in 35.2 % (49/139) and 65.3 % (32/49) of S.aureus clinical isolates, respectively. Twelve distinct cassette arrays were found, containing genes encoding resistance to β-lactams, aminoglycosides, streptothricin, trimethoprim, chloramphenicol,a putative glucose dehydrogenase precursor and a protein with unknown function. Gene cassette arrays aadB, aadA2 and dhfrA1-sat2-aadA1 were common in S.aureus isolates. We detected a completely new gene cassettes which contained aadB, oxa2, aacA4, orfD-aacA4-catB8, aadB-catB3, orfD-aacA4 and aadB-aadA1-cmlA6 of class 1 and dhfrA1-sat2-aadA1, dhfrA11, dhfrA1-sat2 of class 2 integrons.

CONCLUSIONS

This is the first study to report carriage of class 1 and 2 integrons and associated gene cassettes among in S.aureus isolates from Iran.

Detection of Class I Integrons in Staphyloacoccus aurous Isolated From Clinical Samples

Background:

Staphylococcus aurous is a major pathogen, causing variety of diseases and death in Iran and in the world. Despite the use of a spectrum of new antibiotics, this organism has caused severe infections in burns as well as in different parts of the body, due to acquired drug resistance. Widespread inappropriate use of antibiotics in treating bacterial infections has led to the selection and circulation of resistant strains and the growing risk of transferring resistant genes to sensitive bacteria. One of the causes of antibiotic resistance in S. aurous strains is the gain of resistance genes including integrase and qac/sul1.

Objectives:

The purpose of this study was to investigate the presence of class 1 integron in S. aurous strains isolated from clinical samples for the first time in Iran.

Materials and Methods:

This descriptive study was performed on 200 strains of S. aurous isolated from patients admitted to Baqiyatallah Hospital in Tehran in 2013. These strains were confirmed using biochemical and serological tests and the presence of class 1 integron was determined by polymerase chain reaction (PCR).

Results:

Among the 200 samples, 1% of the strains (two isolates) contained the class 1 integron gene. The results of this study showed that the highest frequency of the obtained samples belonged to males and the isolates occurred mostly in individuals aged 51-60 years old. The highest number of strains was found in wound samples. The strains were most frequently isolated from the emergency ward and the intensive care unit (ICU).

Conclusions:

Findings of this study showed that integron can have a limited frequency in S. aurous isolated from clinical sample in Tehran.

Integrons: Vehicles and pathways for horizontal dissemination in bacteria

Integrons are genetic elements first described at the end of the 1980s. Although most integrons were initially described in human clinical isolates, they have now been identified in many non-clinical environments, such as water and soil. Integrons are present in ≈10% of the sequenced bacterial genomes and are frequently linked to mobile genetic elements (MGEs); particularly the class 1 integrons. Genetic linkage to a diverse set of MGEs facilitates horizontal transfer of class 1 integrons within and between bacterial populations and species. The mechanistic aspects limiting transfer of MGEs will therefore limit the transfer of class 1 integrons. However, horizontal movement due to genes provided in trans and homologous recombination can result in class 1 integron dynamics independent of MGEs. A key determinant for continued dissemination of class 1 integrons is the probability that transferred MGEs will be vertically inherited in the recipient bacterial population. Heritability depends both on genetic stability as well as the fitness costs conferred to the host. Here we review the factors known to govern the dissemination of class 1 integrons in bacteria.

Antimicrobial resistance investigation on Staphylococcus strains in a local hospital in Guangzhou, China, 2001-2010

A retrospective study was conducted on 1,739 Staphylococcus isolates from the First Affiliated Hospital of Jinan University (FAHJU) in Guangzhou during 2001-2010. With the exception of teicoplanin and vancomycin, antimicrobial resistance was commonly observed among the isolates examined, with high resistance rates for β-lactamases (94.0% and 73.7% for penicillin and oxacillin) and resistance percentages for cefoxitin, chloramphenicol, ciprofloxacin, clindamycin, erythromycin, gentamicin, trimethoprim-sulfamethoxazole, and tetracycline ranging from 83.9% to 19.4%. Two hundred sixty-three of the 1,739 isolates were subjected to SCCmec typing and 42 to MLST, spaA, and coa typing. ST239-MRSA-III was prevalently identified along with one distinct coa type HIJKL and 2 spaA types (WGKAOMQ-t037 and WGKAQQ-t030). Class 1 integrons were commonly detected (31.6%), although none of the integron-positive MRSA strains had been isolated since 2009. The widespread detection of integron-based antimicrobial resistance determinants may further contribute to the emergence of superbugs.

Loop-mediated isothermal amplification assays for screening of bacterial integrons

Background

The occurrence and prevalence of integrons in clinical microorganisms and their role played in antimicrobial resistance have been well studied recently. As screening and detection of integrons are concerned, current diagnostic methodologies are restricted by significant drawbacks and novel methods are required for integrons detection.

Results

In this study, three loop-mediated isothermal amplification (LAMP) assays targeting on class 1, 2 and 3 integrons were implemented and evaluated. Optimization of these detection assays were performed, including studing on the reaction temperature, volume, time, sensitivity and specificity (both primers and targets). Application of the established LAMP assays were further verified on a total of 1082 isolates (previously identified to be 397 integron-positive and 685 integron-negative strains). According to the results, the indispensability of each primer had been confirmed and the optimal reaction temperature, volume and time were found to be 65°C, 45 min and 25 μL, respectively. As application was concerned, 361, 28 and 8 isolates carrying intI1, intI2 and intI3 yielded positive amplicons, respectively. Other 685 integron-negative bacteria were negative for the integron-screening LAMP assays, totaling the detection rate and specificity to be 100%.

Conclusions

The intI1-, intI2- and intI3-LAMP assays established in this study were demonstrated to be the valid and rapid detection methodologies for the screening of bacterial integrons.

Rapid and simple detection of methicillin-resistance Staphylococcus aureus by orfX loop-mediated isothermal amplification assay

Background

Methicillin-resistant Staphylococcus aureus (MRSA) has become one of the most prevalent pathogens responsible for nosocomial infections throughout the world. As clinical MRSA diagnosis is concerned, current diagnostic methodologies are restricted by significant drawbacks and novel methods are required for MRSA detection. This study aimed at developing a simple loop-mediated isothermal amplification (LAMP) assay targeting on orfX for the rapid detection of methicillin-resistance Staphylococcus aureus (MRSA).

Results

The protocol was designed by targeting orfX, a highly conserved open reading frame in S. aureus. One hundred and sixteen reference strains, including 52 Gram-positive and 64 Gram-negative isolates, were included for evaluation and optimization of the orfX-LAMP assay. This assay had been further performed on 667 Staphylococcus (566 MRSA, 25 MSSA, 53 MRCNS and 23 MSCNS) strains and were comparatively validated by PCR assay using primers F3 and B3, with rapid template DNA processing, simple equipments (water bath) and direct result determination (both naked eye and under UV light) applied. The indispensability of each primer had been confirmed, and the optimal amplification was obtained under 65°C for 45 min. The 25 μl reactant was found to be the most cost-efficient volume, and the detection limit was determined to be 10 DNA copies and 10 CFU/reaction. High specificity was observed when orfX-LAMP assay was subjected to 116 reference strains. For application, 557 (98.4%, 557/566) and 519 (91.7%, 519/566) tested strains had been detected positive by LAMP and PCR assays. The detection rate, positive predictive value (PPV) and negative predictive value (NPV) of orfX-LAMP were 98.4%, 100% and 92.7% respectively.

Conclusions

The established orfX-LAMP assay had been demonstrated to be a valid and rapid detection method on MRSA.

Development and application of loop-mediated isothermal amplification assays on rapid detection of various types of staphylococci strains

A loop-mediated isothermal amplification (LAMP) method for rapid detection of various Staphylococcus strains and associated antibiotic resistance determinant had been developed and evaluated in this study. Six primers, including outer primers, inner primers and loop primers, were specially designed for recognizing eight distinct sequences on three targets: 16SrRNA, femA and mecA.. Forty-one reference strains, including various species of gram-negative and -positive isolates, were included in this study to evaluate and optimize LAMP assays. The optimal reaction condition was found to be 65 °C for 45 min, with detection limits at 100 fg DNA/tube and 10 CFU/reaction for 16S rRNA, 100 fg DNA/tube and 10 CFU/reaction for femA, 1 pg DNA/tube and 100 CFU/reaction for mecA, respectively. Application of LAMP assays were performed on 118 various types of Staphylococcus isolates, the detection rate of LAMP assays for the 16SrRNA, femA and mecA was 100% (118/118), 98.5% (64/65) and 94.3% (66/70), and the negative predictive value (NPV) was 100%, 98.1% and 92.3% respectively; with a 100% positive predictive value (PPV) for all three targets. In conclusion, LAMP assays were demonstrated to be useful and powerful tools for rapid detection of various Staphylococcus strains, and undoubtedly, the rapidness, technical simplicity, and cost-effectiveness of LAMP assays will demonstrate broad application for bacteriological detection of food-borne Methicillin-resistant Staphylococcus (MRS) isolates.

Development and application of a simple loop-mediated isothermal amplification method on rapid detection of Listeria monocytogenes strains

A loop-mediated isothermal amplification (LAMP) method for rapid detection of the food-borne L. monocytogenes strains had been developed and evaluated in this study. The optimal reaction condition was 65 °C for 45 min, with the detection limit as 1 pg DNA/tube and 100 CFU/reaction. Application of the established LAMP assay was performed on 182 food-borne L. monocytogenes strains using a rapid procedure and easy result confirmation, with the sensitivity of LAMP versus PCR assays as 96.7% (176/182) and 91.2% (166/182), respectively; with 100% specificity, positive predictive value (PPV) and negative predictive value (NPV) for both assays.

Class 1 integron in staphylococci

As a major concern in public health, methicillin-resistant staphylococci (MRS) still remains one of the most prevalent pathogens that cause nosocomial infections throughout the world and has been recently labeled as a "super bug" in antibiotic resistance. Thus, surveillance and investigation on antibiotic resistance mechanisms involved in clinical MRS strains may raise urgent necessity and utmost significance. As a novel antibiotic resistance mechanism, class 1 integron has been identified as a primary source of antimicrobial resistance genes in Gram-negative organisms. However, most available studies on integrons had been limited within Gram-negative microbes, little is known for clinical Gram-positive bacteria. Based on series studies of systematic integrons investigation in hundreds of staphylococci strains during 2001-2006, this review concentrated on the latest development of class 1 integron in MRS isolates, including summary of prevalence and occurrence of class 1 integron, analysis of correlation between integron and antibiotic resistance, further demonstration of the role integrons play as antibiotic determinants, as well as origin and evolution of integron-associated gene cassettes during this study period.

Development and application of a loop-mediated isothermal amplification method on rapid detection Escherichia coli O157 strains from food samples

We developed and evaluated the specificity and sensitivity of a loop-mediated isothermal amplification (LAMP) method for rapid detection of the food-borne Escherichia coli O157 strains. Six primers, including outer primers, inner primers and loop primers, were specially designed for recognizing eight distinct sequences on three targets, which were rfbE, stx1 and stx2. The detection limits were found to be 100, 100 and 10 fg DNA/tube for rfbE, stx1 and stx2, respectively. Application of LAMP assays were performed on 417 food-borne E. coli strains, the sensitivity of LAMP assays for the rfbE, stx1 and stx2 was 100, 95.3 and 96.3%, and the negative predictive value was 100, 96.7 and 97.1%, respectively; with a 100% specificity and positive predictive value for all three targets.

Association of virulence plasmid and antibiotic resistance determinants with chromosomal multilocus genotypes in Mexican Salmonella enterica serovar Typhimurium strains

Background

Bacterial genomes are mosaic structures composed of genes present in every strain of the same species (core genome), and genes present in some but not all strains of a species (accessory genome). The aim of this study was to compare the genetic diversity of core and accessory genes of a Salmonella enterica subspecies enterica serovar Typhimurium (Typhimurium) population isolated from food-animal and human sources in four regions of Mexico. Multilocus sequence typing (MLST) and macrorestriction fingerprints by pulsed-field gel electrophoresis (PFGE) were used to address the core genetic variation, and genes involved in pathogenesis and antibiotic resistance were selected to evaluate the accessory genome.

Results

We found a low genetic diversity for both housekeeping and accessory genes. Sequence type 19 (ST19) was supported as the founder genotype of STs 213, 302 and 429. We found a temporal pattern in which the derived ST213 is replacing the founder ST19 in the four geographic regions analyzed and a geographic trend in the number of resistance determinants. The distribution of the accessory genes was not random among chromosomal genotypes. We detected strong associations among the different accessory genes and the multilocus chromosomal genotypes (STs). First, the Salmonella virulence plasmid (pSTV) was found mostly in ST19 isolates. Second, the plasmid-borne betalactamase cmy-2 was found only in ST213 isolates. Third, the most abundant integron, IP-1 (dfrA12, orfF and aadA2), was found only in ST213 isolates. Fourth, the Salmonella genomic island (SGI1) was found mainly in a subgroup of ST19 isolates carrying pSTV. The mapping of accessory genes and multilocus genotypes on the dendrogram derived from macrorestiction fingerprints allowed the establishment of genetic subgroups within the population.

Conclusion

Despite the low levels of genetic diversity of core and accessory genes, the non-random distribution of the accessory genes across chromosomal backgrounds allowed us to discover genetic subgroups within the population. This study provides information about the importance of the accessory genome in generating genetic variability within a bacterial population.

Occurrence and characteristics of class 1 and 2 integrons in Pseudomonas aeruginosa isolates from patients in southern China

Class 1 and 2 integrons were detected in 45.8% (54/118) and 19.5% (23/118) of our tested Pseudomonas aeruginosa isolates, respectively. Three strains were positive for both the integrons. This is the first report of class 2 integrons in P. aeruginosa and also of isolates carrying class 1 and 2 integrons simultaneously.