Mesoporous Organosilica Hollow Nanoparticles: Synthesis and Applications

Shaping Nanoparticles for Interface Catalysis: Concave Hollow Spheres via Deflation-Inflation Asymmetric Growth

Hollow spheres are charming objects in nature. In this work, an unexpected deflation-inflation asymmetric growth (DIAG) strategy is reported, generating hollow nanoparticles with tailored concave geometry for interface catalysis. Starting from aminophenol-formaldehyde (APF) nanospheres where the interior crosslinking degree is low, fully deflated nanobowls are obtained after etching by acetone. Due to APF etching and repolymerization reactions occuring asymmetrically within a single particle, an autonomous inflation process is observed similar to a deflated basketball that inflates back to a "normal" ball, which is rare at the nanoscale. A nucleophilic addition reaction between acetone and APF is elucidated to explain the chemistry origin of the DIAG process. Interestingly, the deflated APF hollow spheres enable preferential immobilization of lipase in the concave domain, which facilitates the stabilization of Pickering emulsion droplets for enhanced enzymatic catalysis at the oil-water interface. The study provides new understandings in the designable synthesis of hollow nanoparticles and paves the way toward a wide range of applications of asymmetric architectures.

Soft Mesoporous Organosilica Nanoplatforms Improve Blood Circulation, Tumor Accumulation/Penetration, and Photodynamic Efficacy

To date, the ability of nanoplatforms to achieve excellent therapeutic responses is hindered by short blood circulation and limited tumor accumulation/penetration. Herein, a soft mesoporous organosilica nanoplatform modified with hyaluronic acid and cyanine 5.5 are prepared, denoted SMONs-HA-Cy5.5, and comparative studies between SMONs-HA-Cy5.5 (24.2 MPa) and stiff counterparts (79.2 MPa) are conducted. Results indicate that, apart from exhibiting a twofold increase in tumor cellular uptake, the soft nanoplatforms also display a remarkable pharmacokinetic advantage, resulting in considerably improved tumor accumulation. Moreover, SMONs-HA-Cy5.5 exhibits a significantly higher tumor penetration, achieving 30-μm deeper tissue permeability in multicellular spheroids relative to the stiff counterparts. Results further reveal that the soft nanoplatforms have an easier extravasation from the tumor vessels, diffuse farther in the dense extracellular matrix, and reach deeper tumor tissues compared to the stiff ones. Specifically, the soft nanoplatforms generate a 16-fold improvement (43 vs. 2.72 μm) in diffusion distance in tumor parenchyma. Based on the significantly improved blood circulation and tumor accumulation/penetration, a soft therapeutic nanoplatform is constructed by loading photosensitizer chlorin e6 in SMONs-HA-Cy5.5. The resulting nanoplatform exhibits considerably higher therapeutic efficacy on tumors compared to the stiff ones.

Alcalase Microarray Base on Metal Ion Modified Hollow Mesoporous Silica Spheres as a Sustainable and Efficient Catalysis Platform for Proteolysis

The industrial exploitation of protease is limited owing to its sensitivity to environmental factors and autolysis during biocatalytic processes. In the present study, the alcalase microarray (Bacillus licheniformis, alcalase@HMSS-NH₂-Metal) based on different metal ions modified hollow mesoporous silica spheres (HMSS-NH₂-Metal) was successfully developed via a facile approach. Among the alcalase@HMSS-NH₂-Metal (Ca²⁺, Zn²⁺, Fe³⁺, Cu²⁺), the alcalase@HMSS-NH₂-Fe³⁺ revealed the best immobilization efficiency and enzymatic properties. This tailor-made nanocomposite immobilized alcalase on a surface-bound network of amino-metal complex bearing protein-modifiable sites via metal-protein affinity. The coordination interaction between metal ion and alcalase advantageously changed the secondary structure of enzyme, thus significantly enhanced the bioactivities and thermostability of alcalase. The as-prepared alcalase@HMSS-NH₂-Fe³⁺ exhibited excellent loading capacity (227.8 ± 23.7 mg/g) and proteolytic activity. Compared to free form, the amidase activity of alcalase microarray increased by 5.3-fold, the apparent kinetic constant V_max/K_m of alcalase@HMSS-NH₂-Fe³⁺ (15.6 min⁻¹) was 1.9-fold higher than that of free alcalase, and the biocatalysis efficiency increased by 2.1-fold for bovine serum albumin (BSA) digestion. Moreover, this particular immobilization strategy efficiently reduced the bioactivities losses of alcalase caused by enzyme leaking and autolysis during the catalytic process. The alcalase microarray still retained 70.7 ± 3.7% of the initial activity after 10 cycles of successive reuse. Overall, this study established a promising strategy to overcome disadvantages posed by free alcalase, which provided new expectations for the application of alcalase in sustainable and efficient proteolysis.

Multimodal Decorations of Mesoporous Silica Nanoparticles for Improved Cancer Therapy

The presence of leaky vasculature and the lack of lymphatic drainage of small structures by the solid tumors formulate nanoparticles as promising delivery vehicles in cancer therapy. In particular, among various nanoparticles, the mesoporous silica nanoparticles (MSN) exhibit numerous outstanding features, including mechanical thermal and chemical stability, huge surface area and ordered porous interior to store different anti-cancer therapeutics with high loading capacity and tunable release mechanisms. Furthermore, one can easily decorate the surface of MSN by attaching ligands for active targeting specifically to the cancer region exploiting overexpressed receptors. The controlled release of drugs to the disease site without any leakage to healthy tissues can be achieved by employing environment responsive gatekeepers for the end-capping of MSN. To achieve precise cancer chemotherapy, the most desired delivery system should possess high loading efficiency, site-specificity and capacity of controlled release. In this review we will focus on multimodal decorations of MSN, which is the most demanding ongoing approach related to MSN application in cancer therapy. Herein, we will report about the recently tried efforts for multimodal modifications of MSN, exploiting both the active targeting and stimuli responsive behavior simultaneously, along with individual targeted delivery and stimuli responsive cancer therapy using MSN.

Mesoporous Silica Supported Silver-Bismuth Nanoparticles as Photothermal Agents for Skin Infection Synergistic Antibacterial Therapy

The emergence of multidrug resistant bacteria has resulted in plenty of stubborn nosocomial infections and severely threatens human health. Developing novel bactericide and therapeutic strategy is urgently needed. Herein, mesoporous silica supported silver-bismuth nanoparticles (Ag-Bi@SiO₂ NPs) are constructed for synergistic antibacterial therapy. In vitro experiments indicate that the hyperthermia originating from Bi NPs can disrupt cell integrity and accelerate the Ag ions release, further exhibiting an excellent antibacterial performance toward methicillin-resistant Staphylococcus aureus (MRSA). Besides, under laser irradiation, Ag-Bi@SiO₂ NPs at 100 µg mL^-1 can effectively obliterate mature MRSA biofilm and cause a 69.5% decrease in the biomass, showing a better therapeutic effect than Bi@SiO₂ NPs with laser (26.8%) or Ag-Bi@SiO₂ NPs without laser treatment (30.8%) groups. More importantly, in vivo results confirm that ≈95.4% of bacteria in abscess are killed and the abscess ablation is accelerated using the Ag-Bi@SiO₂ NPs antibacterial platform. Therefore, Ag-Bi@SiO₂ NPs with photothermal-enhanced antibacterial activity are a potential nano-antibacterial agent for the treatment of skin infections.

Synthesis of monodisperse rod-shaped silica particles through biotemplating of surface-functionalized bacteria

Mesoporous silica particles of controlled size and shape are potentially beneficial for many applications, but their usage may be limited by the complex procedure of fabrication. Biotemplating provides a facile approach to synthesize materials with desired shapes. Herein, a bioinspired design principle is adopted through displaying silaffin-derived 5R5 proteins on the surface of Escherichia coli by genetic manipulations. The genetically modified Escherichia coli provides a three-dimensional template to regulate the synthesis of rod-shaped silica. The silicification is initiated on the cell surface under the functionality of 5R5 proteins and subsequentially the inner space is gradually filled. Density functional theory simulation reveals the interfacial interactions between silica precursors and R5 peptides at the atomic scale. There is a large conformation change of this protein during biosilicification. Electrostatic interactions contribute to the high affinity between positively charged residues (Lys4, Arg16, Arg17) and negatively charged tetraethyl orthosilicate. Hydrogen bonds develop between Arg16 (OH), Arg17 (OH and NH), Leu19 (OH) residues and the forming silica agglomerates. In addition, the resulting rod-shaped silica copy of the bacteria can transform into mesoporous SiOx nanorods composed of carbon-coated nanoparticles after carbonization, which is shown to allow superior lithium storage performance.

Hydrophobicity-Tuned Periodic Mesoporous Organo-Silica Nanoparticles for Photodynamic Therapy

Since their invention, periodic mesoporous organosilicas (PMOs), an innovative class of materials based on organic as well as inorganic hybrid nanocomposites, have gathered enormous interest owing to their advantageous physicochemical attributes over the pristine mesoporous silica nanoparticles (MSNs). To further increase the interactions with the therapeutic guest species and subsequent compatibility as well as the physicochemical properties of PMOs, we demonstrate the post-hydroxylation of benzene-bridged PMO-based nanoparticles for photodynamic therapy (PDT). Initially, the hydrophobic benzene group in the PMO framework is modified through electrophilic substitution-assisted hydroxylation mediated by Fenton as well as Fenton-like reactions utilizing divalent and trivalent metal salts, respectively. These post-grafted PMOs with tuned hydrophobicity resulted in improved biocompatibility as well as drug loading efficiency through governing the interactions in host-guest chemistry by changing the physicochemical properties of the PMO frameworks. Furthermore, the photosensitizer, protoporphyrin IX (PpIX) molecules, encapsulated in the PMO frameworks showed a significant PDT effect in colon carcinoma (HT-29 cell line) and Gram-negative bacterial strain, Escherichia coli (E. coli). Furthermore, the light-induced cytotoxic properties in vitro are confirmed by various tests, including lactate dehydrogenase (LDH) assay for cell membrane damage and caspase assay for apoptosis determination. Indeed, the delivered PpIX molecules from PMOs generated deadly singlet oxygen species intracellularly under visible light irradiation, resulting in cell death through concomitantly triggered apoptotic caspases. Together, our findings demonstrate that this post-modified PMO design is highly advantageous and can be used as an effective PDT platform.

Preparation and Characterization of Novel Mixed Periodic Mesoporous Organosilica Nanoparticles

We report herein the preparation of mixed periodic mesoporous organosilica nanoparticles (E-Pn 75/25 and 90/10 PMO NPs) by sol-gel co-condensation of E-1,2-bis(triethoxysilyl)ethylene ((E)-BTSE or E) with previously synthesized disilylated tert-butyl 3,5-dialkoxybenzoates bearing either sulfide (precursor P1) or carbamate (precursor P2) functionalities in the linker. The syntheses were performed with cetyltrimethylammonium bromide (CTAB) as template in the presence of sodium hydroxide in water at 80 °C. The nanomaterials have been characterized by Transmission Electron Microscopy (TEM), nitrogen-sorption measurements (BET), Dynamic Light Scattering (DLS), zeta-potential, Thermogravimetric Analysis (TGA), FTIR, 13C CP MAS NMR and small angle X-ray diffraction (p-XRD). All the nanomaterials were obtained as mesoporous rodlike-shape nanoparticles. Remarkably, E-Pn 90/10 PMO NPs presented high specific surface areas ranging from 700 to 970 m2g-1, comparable or even higher than pure E PMO nanorods. Moreover, XRD analyses showed an organized porosity for E-P1 90/10 PMO NPs typical for a hexagonal 2D symmetry. The other materials showed a worm-like mesoporosity.

Periodic Mesoporous Organosilica Nanoparticles with BOC Group, towards HIFU Responsive Agents

Periodic Mesoporous Organosilica Nanoparticles (PMONPs) are nanoparticles of high interest for nanomedicine applications. These nanoparticles are not composed of silica (SiO2). They belong to hybrid organic-inorganic systems. We considered using these nanoparticles for CO2 release as a contrast agent for High Intensity Focused Ultrasounds (HIFU). Three molecules (P1-P3) possessing two to four triethoxysilyl groups were synthesized through click chemistry. These molecules possess a tert-butoxycarbonyl (BOC) group whose cleavage in water at 90-100 °C releases CO2. Bis(triethoxysilyl)ethylene E was mixed with the molecules Pn (or not for P3) at a proportion of 90/10 to 75/25, and the polymerization triggered by the sol-gel procedure led to PMONPs. PMONPs were characterized by different techniques, and nanorods of 200-300 nm were obtained. These nanorods were porous at a proportion of 90/10, but non-porous at 75/25. Alternatively, molecules P3 alone led to mesoporous nanoparticles of 100 nm diameter. The BOC group was stable, but it was cleaved at pH 1 in boiling water. Molecules possessing a BOC group were successfully used for the preparation of nanoparticles for CO2 release. The BOC group was stable and we did not observe release of CO2 under HIFU at lysosomal pH of 5.5. The pH needed to be adjusted to 1 in boiling water to cleave the BOC group. Nevertheless, the concept is interesting for HIFU theranostic agents.

Light-Emitting Lanthanide Periodic Mesoporous Organosilica (PMO) Hybrid Materials

Periodic mesoporous organosilicas (PMOs) have a well ordered mesoporous structure, a high thermal and mechanical stability and a uniform distribution of organic functionalities in the pore walls. The organic groups allow PMOs to be modified and functionalized by using a wide range of organic reactions. Since their first report in 1999, PMOs have found a vast range of applications, such as for catalysis, adsorbents, low-k films, biomedical supports and also for optical applications. Optical applications are very interesting as PMOs offer the possibility of designing advanced luminescent hybrid materials comprising of organic components, yet with much higher stability and very good processability. Despite their promising possibilities, the optical properties of pristine PMOs and PMOs grafted with d-metal or f-metal ions and complexes have been explored less frequently. In this review, we aimed to overview the exciting light emitting properties of various reported lanthanide PMO hybrid materials and interest the reader in this promising application for lanthanide PMO materials.

Spherical Mesoporous Materials from Single to Multilevel Architectures

Mesoporous materials with various structures have attracted considerable attention due to their distinctive properties such as large pore sizes, high surface areas, tunable pore structures, and controllable framework compositions. Among them, spherical mesoporous materials (SMMs) are of great interest owing to the unique spherical shape, which show the closed packing nature and lowest surface energy. The open mesopores and short channels of SMMs not only increase the density of high accessible active sites but also facilitate the mass diffusion with short length. These characteristics are particularly useful for applications in catalysis, adsorption, energy storage and conversion, biomedicine, and so on. In addition, the creation of a spherical shape is conformable to the law of natural selection because objects in nature tend to minimize energy, while the sphere is one of the most perfect matter structures. Therefore, the design and synthesis of SMMs are very important from both fundamental and technological viewpoints. Compared to the simple single-level, SMMs with more complex multilevel structures inevitably bring unusual mechanical, electrical, and optical properties, which are highly desired for practical applications. For example, the construction of core-shell structured SMMs has inspired great attention as they can combine multiple components into one functional unit, exhibiting ameliorated or new physicochemical properties, which cannot be obtained from the isolated one. The presence of a hollow cavity in the yolk-shell structure allows sufficient exposure of the core while maintaining the protective ability of the shell, which is conducive to retaining the distance-dependent properties of the core. Multishelled hollow structures consisting of two or more mesoporous shells are expected to show superior activities in various applications compared to their bulk counterparts because more active interfaces and unique compartmentation environments can be provided. Therefore, SMMs from single to multilevel structure represent a class of advanced nanostructured materials with unique structures and fascinating properties. In this Account, we highlight the progresses on the synthesis and applications of SMMs from single to multilevel architectures. The synthetic strategies have been summarized and categorized into (i) the modified Stöber method, (ii) the hydrothermal strategy, (iii) the biphase stratification approach, (iv) the nanoemulsion assembly method, (v) the evaporation induced aggregating assembly (EIAA) method, and (vi) the confined self-assembly strategy. Special emphasis is placed on the synthetic principles and underlying mechanisms for precise control of SMMs over the particle sizes, pore sizes, pore structures and functionalities as well as different levels of architectures. Moreover, the implementation performances in catalysis, drug delivery, and energy related fields have been highlighted. Finally, the opportunities and challenges for the future development of SMMs in terms of synthesis and applications are proposed.

Precision Cancer Theranostic Platform by In Situ Polymerization in Perylene Diimide-Hybridized Hollow Mesoporous Organosilica Nanoparticles

Phototheranostics refers to advanced photonics-mediated theranostic methods for cancer and includes imaging-guided photothermal/chemotherapy, photothermal/photodynamic therapy, and photodynamic/chemotherapy, which are expected to provide a paradigm of modern precision medicine. In this regard, various phototheranostic drug delivery systems with excellent photonic performance, controlled drug delivery/release, and precise photoimaging guidance have been developed. In this study, we reported a special "in situ framework growth" method to synthesize novel phototheranostic hollow mesoporous nanoparticles by ingenious hybridization of perylene diimide (PDI) within the framework of small-sized hollow mesoporous organosilica (HMO). The marriage of PDI and HMO endowed the phototheranostic silica nanoparticles (HMPDINs) with largely amplified fluorescence and photoacoustic signals, which can be used for enhanced fluorescence and photoacoustic imaging. The organosilica shell can be chemically chelated with isotope ⁶⁴Cu for positron emission tomography imaging. Moreover, in situ polymer growth was introduced in the hollow structure of the HMPDINs to produce thermosensitive polymer (TP) in the cavity of HMPDINs to increase the loading capacity and prevent unexpected leakage of the hydrophobic drug SN38. Furthermore, the framework-hybridized PDI generated heat under near-infrared laser irradiation to trigger the deformation of TP for controlled drug release in the tumor region. The fabricated hybrid nanomedicine with organic-inorganic characteristic not only increases the cancer theranostic efficacy but also offers an attractive solution for designing powerful theranostic platforms.

Targeted and stimuli-responsive mesoporous silica nanoparticles for drug delivery and theranostic use

For cancer therapy, the usefulness of mesoporous silica nanoparticles (MPSNPs) has been widely discussed, likely due to its inorganic nature and excellent structural features. The MPSNPs-based chemotherapeutics have been promisingly delivered to their target sites that help to minimize side effects and improve therapeutic effectiveness. A wide array of studies have been conducted to functionalize drug-loaded MPSNPs using targeting ligands and stimuli-sensitive substances. In addition, anticancer drugs have been precisely delivered to their target sites using MPSNPs, which respond to multi-stimuli. Furthermore, MPSNPs have been extensively tested for their safety and compatibility. The toxicity level of MPSNPs is substantially lower as compared to that of colloidal silica; however, in oxidative stress, they exhibit cytotoxic features. The biocompatibility of MPSNPs can be improved by modifying their surfaces. This article describes the production procedures, functionalization, and applications of biocompatible MPSNPs in drug delivery.

Sequential therapy for pancreatic cancer by losartan- and gemcitabine-loaded magnetic mesoporous spheres

Sequential therapy has attracted increasing attention for cancer treatment, in which multiple drugs can be used to enhance the therapeutic efficacy. In this work, sequential therapy is demonstrated using amino functionalized Fe₃O₄ embedded periodic mesoporous organosilica spheres (Fe₃O₄@PMO-NH₂) and Fe₃O₄@PMO as drug carriers. Losartan can inhibit type I collagen and hyaluronic acid of the pancreatic cancer matrix, which is safe and inexpensive, and does not increase the risk of tumor metastasis. First, losartan is loaded in the Fe₃O₄@PMO-NH₂ (Fe₃O₄@PMO-NH₂-Los) to treat pancreatic cancer. Immunohistochemistry staining of tumor slices after treatment with Fe₃O₄@PMO-NH₂-Los confirms that collagen and hyaluronan acid are significantly reduced. The major solid components in the extracellular matrix of the tumor are reduced, which facilitates the penetration of nanodrugs into the tumor site. Afterward, gemcitabine loaded Fe₃O₄@PMO (Fe₃O₄@PMO-Gem) is sequentially delivered to treat pancreatic cancer, which shows strong killing ability for the pancreatic cancer cells. Comparing with a saline group, the tumor volume treated with Fe₃O₄@PMO-NH₂-Los, Fe₃O₄@PMO-Gem, and Fe₃O₄@PMO-NH₂-Los + Fe₃O₄@PMO-Gem decreases to 92.6%, 60.7%, and 28.6%, respectively, suggesting that the sequential therapy significantly inhibits pancreatic tumor growth compared to the mono-therapy strategy. Taken together, this study provides a promising approach for nanomaterials-based sequential therapy for pancreatic cancer treatment.

Sequential therapy has attracted increasing attention for cancer treatment, in which multiple drugs can be used to enhance the therapeutic efficacy.

Facile Synthesis of Monodisperse Hollow Mesoporous Organosilica/Silica Nanospheres by an in Situ Dissolution and Reassembly Approach

Hollow structured mesoporous organosilicas are a research hotspot because of their molecularly organic-inorganic hybrid frameworks, large void spaces, permeable shells, high surface areas, uniform pores, and various applications. However, the previous reported hard-core templating method and liquid-interface assembly approach suffered from complex preparation procedures and poor uniformity for the products. In this work, we demonstrate an in situ dissolution and reassembly method to synthesize monodisperse benzene-bridged hollow mesoporous organosilica/silica nanoparticles (HMOSNs) by sequential addition of tetraethoxysilane (TEOS) and 1,4-bis(triethoxysilyl)benzene in a solution containing a cetyltrimethylammonium bromide (CTAB) surfactant. The formation of HMOSNs is completed in one pot, which is very effective and convenient. The formation mechanism of HMOSNs is ascribed to the fact that TEOS first assembles with CTAB to form mesostructured silica cores, which further dissolve and migrate to the outer layers during the deposition of mesostructured organosilica shells. The prepared benzene-bridged HMOSNs possess uniform diameter (140 nm), large pore volume (2.79 m³/g), high specific surface area (2926 m²/g), and a high doxorubicin-loading content of 16.7%. HMOSNs can deliver doxorubicin (Dox) into human breast cancer cells and reduce their excretion. Thus, the Dox-loaded HMOSNs show a high killing effect against the cancer cells.

Sensitive, Real-Time, and In-Vivo Oxygen Monitoring for Photodynamic Therapy by Multifunctional Mesoporous Nanosensors

Real-time monitoring of oxygen consumption is beneficial to predict treatment responses and optimize therapeutic protocols for photodynamic therapy (PDT). In this work, we first demonstrate that deformable hollow mesoporous organosilica nanoparticles (HMONs) can be used to load [(Ru(dpp)₃)]Cl₂ for detecting oxygen (denoted as HMON-[(Ru(dpp)₃)]Cl₂). This nanoprobe shows significantly improved biocompatibility and high cellular uptake. In-vitro experiments demonstrate that the HMON-[(Ru(dpp)₃)]Cl₂ can sensitively detect oxygen changes between 1% and 20%. On this basis, photosensitizer chlorin e6 (Ce6) and [(Ru(dpp)₃)]Cl₂ are simultaneously loaded in the HMONs (denoted as HMON-Ce6-[(Ru(dpp)₃)]Cl₂) for real-time oxygen monitoring during photodynamic therapy. The HMON-Ce6-[(Ru(dpp)₃)]Cl₂ can reflects oxygen consumption in solution and cells in photodynamic therapy. Furthermore, the ability of the HMON-Ce6-[(Ru(dpp)₃)]Cl₂ nanosensor to monitor oxygen changes is demonstrated in tumor-bearing nude mice.

Encapsulating mesoporous metal nanoparticles: towards a highly active and stable nanoreactor for oxidative coupling reactions in water

We design and prepare a highly active and stable nanoreactor by encapsulating mesoporous metal nanoparticles for efficient production of α,β-unsaturated ketones via a one-pot oxidative coupling reaction.

General microemulsion synthesis of organic–inorganic hybrid hollow mesoporous silica spheres with enlarged pore size

General microemulsion synthesis of organic–inorganic hybrid hollow mesoporous silica spheres with enlarge pore size with different kinds of pore expanders.