Surface hydrophilization of microporous polypropylene membrane by grafting zwitterionic polymer for anti-biofouling

Zwitterionic materials for antifouling membrane surface construction

Membrane separation processes are often perplexed by severe and ubiquitous membrane fouling. Zwitterionic materials, keeping electric neutrality with equivalent positive and negative charged groups, are well known for their superior antifouling properties and have been broadly utilized to construct antifouling surfaces for medical devices, biosensors and marine coatings applications. In recent years, zwitterionic materials have been more and more frequently utilized for constructing antifouling membrane surfaces. In this review, the antifouling mechanisms of zwitterionic materials as well as their biomimetic prototypes in cell membranes will be discussed, followed by the survey of common approaches to incorporate zwitterionic materials onto membrane surfaces including surface grafting, surface segregation, biomimetic adhesion, surface coating and so on. The potential applications of these antifouling membranes are also embedded. Finally, we will present a brief perspective on the future development of zwitterionic materials modified antifouling membranes.

STATEMENT OF SIGNIFICANCE

Membrane fouling is a severe problem hampering the application of membrane separation technology. The properties of membrane surfaces play a critical role in membrane fouling and antifouling behavior/performance. Antifouling membrane surface construction has evolved as a hot research issue for the development of membrane processes. Zwitterionic modification of membrane surfaces has been recognized as an effective strategy to resist membrane fouling. This review summarizes the antifouling mechanisms of zwitterionic materials inspired by cell membranes as well as the popular approaches to incorporate them onto membrane surfaces. It can help form a comprehensive knowledge about the principles and methods of modifying membrane surfaces with zwitterionic materials. Finally, we propose the possible future research directions of zwitterionic materials modified antifouling membranes.

Advances in preparation, modification, and application of polypropylene membrane

Polypropylene (PP) is one of the most used polymers for microporous membrane fabrication due to its good thermal stability, chemical resistance, mechanical strength, and low cost. There have been numerous studies reporting the developments and applications of PP membranes. However, PP membrane with high performance is still a challenge. Thus, this article presents a comprehensive overview of the advances in the preparation, modification and application of PP membrane. The preparation methods of PP membrane are firstly reviewed, followed by the modification approaches of PP membrane. The modifications includes hydrophilic and superhydrophobic modification so that the PP membranes become more suitable to be applied either in aqueous applications or in non-aqueous ones. The fouling resistant of hydrophilized PP membrane and the wetting resistant of superhydrophobized PP membrane are then reviewed. Finally, special attention is given to the various potential applications and industrial outlook of the PP membranes.

Constructing a novel zwitterionic surface of PVDF membrane through the assembled chitosan and sodium alginate

A novel zwitterionic surface of PVDF membrane with significantly improved antifouling properties was prepared though pressure-assisted layer by layer self-assembly method based on the electrostatic interactions of chitosan (CS), sodium alginate (SA) and polyfunctional lysine. For the modified C-S-C-S-L membrane, the contact angle decreased to 35°, the bovine serum albumin (BSA) adsorption mass of static fouling on the membrane surface decreased to 10μg/cm(2), and the secondary water flux recovery rate (FRR) of dynamic fouling of BSA and humic acid (HA) pollutants increased to 98% and 99%, respectively, exhibiting excellent antifouling performance. The results demonstrated that using charged bio-macromolecules and amino acids to build zwitterionic surface was effective and convenient to change the interface properties of the separation membrane through the pressure-assisted self-assembly modification method, and provided a new way for the industrial scale hydrophilic modification of hydrophobic porous membrane materials.

CuSO4/H2O2-Induced Rapid Deposition of Polydopamine Coatings with High Uniformity and Enhanced Stability

Mussel-inspired polydopamine (PDA) deposition offers a promising route to fabricate multifunctional coatings for various materials. However, PDA deposition is generally a time-consuming process, and PDA coatings are unstable in acidic and alkaline media, as well as in polar organic solvents. We report a strategy to realize the rapid deposition of PDA by using CuSO4/H2O2 as a trigger. Compared to the conventional processes, our strategy shows the fastest deposition rate reported to date, and the PDA coatings exhibit high uniformity and enhanced stability. Furthermore, the PDA-coated porous membranes have excellent hydrophilicity, anti-oxidant properties, and antibacterial performance. This work demonstrates a useful method for the environmentally friendly, cost-effective, and time-saving fabrication of PDA coatings.

Self-assembly of protein-zwitterionic polymer bioconjugates into nanostructured materials

Bioconjugates of a red fluorescent protein mCherry and a zwitterionic polymer (PDMAPS) are self-assembled into nanostructured materials. The concentrated solution phase behaviour is studied to elucidate the effect of high charge density along the polymer backbone.

Composite nanofiltration membranes via the co-deposition and cross-linking of catechol/polyethylenimine

Composite NF membranes are fabricated based on the co-deposition of CCh/PEI. The optimized membranes possess high rejection of multivalent ions with acceptable flux and show excellent operational stability over long-term filtration process.

Superhydrophilicity and spontaneous spreading on zwitterionic surfaces: carboxybetaine and sulfobetaine

Wetting behavior of zwitterionic surfaces fabricated by grafting sulfobetaine silane (SBSi) and carboxybetaine silane (CBSi) on glass slides.

Versatile surface charge-mediated anti-fouling UF/MF membrane comprising charged hyperbranched polyglycerols (HPGs) and PVDF membranes

We develop a charge-modified PVDF UF/MF membrane that restricts membrane fouling derived from charged water contaminants.

Durable antifouling polyvinylidene fluoride membrane via surface zwitterionicalization mediated by an amphiphilic copolymer

The antifouling properties of PVDF membrane were remarkably enhanced by facile incorporation of an amphiphilic triblock copolymer PDMAEMA-b-PDMS-b-PDMAEMA and subsequent surface zwitterionicalization.

Dual-mode antifouling ability of PVDF membrane with a surface-anchored amphiphilic polymer

Surface-anchored PDMS-g-PEG effectively improved the dual-mode antifouling properties of PVDF membrane.

Zwitterionic SiO2 nanoparticles as novel additives to improve the antifouling properties of PVDF membranes

Zwitterionic SiO₂ nanoparticles exhibit great potential for improving the antifouling performance of hydrophobic PVDF membranes.

Mussel-inspired dopamine- and plant-based cardanol-containing polymer coatings for multifunctional filtration membranes

A series of copolymers [PCD#s, where # is the weight percentage of dopamine methacrylamide (DMA) in polymers] containing mussel-inspired hydrophilic dopamine and plant-based hydrophobic cardanol moieties was prepared via radical polymerization using DMA and 2-hydroxy-3-cardanylpropyl methacrylate (HCPM) as the monomers. PCD#s were used as coating materials to prevent flux decline of the membranes caused by the adhesion of biofoulants and oil-foulants. Polysulfone (PSf) ultrafiltration membranes coated with PCD#s showed higher biofouling resistance than the bare PSf membrane, and the bactericidal properties of the membranes increased upon increasing the content of HCPM units in the PCD#s. Serendipitously, the PSf membranes coated with the more or less amphiphilic PCD54 and PCD74, having the optimum amount of both hydrophilic DMA and hydrophobic HCPM moieties, showed noticeably higher oil-fouling resistance than the more hydrophilic PCD91-coated membrane, the more hydrophobic PCD0-coated membrane, and the bare PSf membrane. Therefore, multifunctional coating materials having biofouling- and oil-fouling-resistant and bactericidal properties could be prepared from the monomers containing mussel-inspired dopamine and plant-based cardanol groups.

Surface modification of poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS) elastomer via covalent immobilization of nonionic sugar-based Gemini surfactants

Gemini surfactants (GS) with sugar-containing head-groups and different alkyl chains were successfully prepared. Poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS) elastomer was grafted with glycidyl methacrylate (GMA) by means of UV-induced graft polymerization, and then the pGMA-grafted film was chemically immobilized with the GS. The surface graft polymerization was confirmed by ATR-FTIR and XPS. The wettability and hemocompatibility of the modified surface were characterized by means of water contact angle, protein adsorption, and platelet adhesion assays. The results showed that amphiphilic surfactant-containing polymer surfaces presented protein-resistant behavior and anti-platelet adhesion after functionalization with GS, GS1 and GS2. Besides, the hemocompatibility of the modified surface deteriorated as the length of hydrophobic chain of GS increased.

Revealing amphiphilic nanodomains of anti-biofouling polymer coatings

Undesired bacterial adhesion and biofilm formation on wetted surfaces leads to significant economic and environmental costs in various industries. Amphiphilic coatings with molecular hydrophilic and hydrophobic patches can mitigate such biofouling effectively in an environmentally friendly manner. The coatings are synthesized by copolymerizing (Hydroxyethyl)methacrylate and perfluorodecylacrylate via initiated chemical vapor deposition (iCVD). In previous studies, the size of the patches was estimated to be ∼1.4-1.75 nm by fitting protein adsorption data to a theoretical model. However, no direct observations of the molecular heterogeneity exist and therefore the origin of the fouling resistance of amphiphilic coatings remains unclear. Here, the amphiphilic nature is investigated by amplitude modulation atomic force microscopy (AM-AFM). High-resolution images obtained by penetrating and oscillating the AFM tip under the naturally present water layer with sub-nanometer amplitudes reveal, for the first time, the existence of amphiphilic nanodomains (1-2 nm(2)). Compositional heterogeneity at the nanoscale is further corroborated by a statistical analysis on the data obtained with dynamic AM-AFM force spectroscopy. Variations in the long range attractive forces, responsible for water affinity, are also identified. These nanoscopic results on the polymers wettability are also confirmed by contact angle measurements (i.e., static and dynamic). The unprecedented ability to visualize the amphiphilic nanodomains as well as sub-nanometer crystalline structures provides strong evidence for the existence of previously postulated nanostructures, and sheds light on the underlying antifouling mechanism of amphiphilic chemistry.

Preparation of Sulfobetaine-Grafted PVDF Hollow Fiber Membranes with a Stably Anti-Protein-Fouling Performance

Based on a two-step polymerization method, two sulfobetaine-based zwitterionic monomers, including 3-(methacryloylamino) propyl-dimethyl-(3-sulfopropyl) ammonium hydroxide (MPDSAH) and 2-(methacryloyloxyethyl) ethyl-dimethyl-(3-sulfopropyl) ammonium (MEDSA), were successfully grafted from poly(vinylidene fluoride) (PVDF) hollow fiber membrane surfaces in the presence of N,N′-methylene bisacrylamide (MBAA) as a cross-linking agent. The mechanical properties of the PVDF membrane were improved by the zwitterionic surface layers. The surface hydrophilicity of PVDF membranes was significantly enhanced and the polyMPDSAH-g-PVDF membrane showed a higher hydrophilicity due to the higher grafting amount. Compared to the polyMEDSA-g-PVDF membrane, the polyMPDSAH-g-PVDF membrane showed excellent significantly better anti-protein-fouling performance with a flux recovery ratio (RFR) higher than 90% during the cyclic filtration of a bovine serum albumin (BSA) solution. The polyMPDSAH-g-PVDF membrane showed an obvious electrolyte-responsive behavior and its protein-fouling-resistance performance was improved further during the filtration of the protein solution with 100 mmol/L of NaCl. After cleaned with a membrane cleaning solution for 16 days, the grafted MPDSAH layer on the PVDF membrane could be maintain without any chang; however, the polyMEDSA-g-PVDF membrane lost the grafted MEDSA layer after this treatment. Therefore, the amide group of sulfobetaine, which contributed significantly to the higher hydrophilicity and stability, was shown to be imperative in modifying the PVDF membrane for a stable anti-protein-fouling performance via the two-step polymerization method.

A simple approach to constructing antibacterial and anti-biofouling nanofibrous membranes

In this work, antibacterial and anti-adhesive polymeric thin films were constructed on polyacrylonitrile (PAN) nanofibrous membranes in order to extend their applications. Polyhexamethylene guanidine hydrochloride (PHGH) as an antibacterial agent and heparin (HP) as an anti-adhesive agent have been successfully coated onto the membranes via a layer-by-layer (LBL) assembly technique confirmed by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), energy-dispersive spectroscopy (EDS) and scanning electron microscopy (SEM). The antibacterial properties of LBL-functionalized PAN nanofibrous membranes were evaluated using the Gram-positive bacterium Staphylococcus aureus and the Gram-negative Escherichia coli. Furthermore, the dependence of the antibacterial activity and anti-biofouling performance on the number of layers in the LBL films was investigated quantitatively. It was found that these LBL-modified nanofibrous membranes possessed high antibacterial activities, easy-cleaning properties and stability under physiological conditions, thus qualifying them as candidates for anti-biofouling coatings.

Measurement of the electrostatic interaction between polyelectrolyte brush surfaces by optical tweezers

We demonstrated an optical tweezers method to measure the electrostatic interaction between the strong polyelectrolyte brushes, poly(2-(methacryloyloxy)ethyltrimethylammonium chloride) (PMTAC), grafted on silica particles in aqueous media. The weak electrostatic interaction was successfully detected with a resolution of less than 0.1 μN m(-1). The apparent Debye length, including the charge distribution in the polymer brush and the surface potential, decreased as the salt concentration in the medium increased. The experimentally obtained surface charge density was much smaller than that estimated from the amount of polyelectrolyte on the surface. Furthermore, the dissociation of ionic groups was enhanced by decreasing the grafting density of the polyelectrolyte brush. The results suggest that the majority of chloride counterions was immobilized in the dense polyelectrolyte brush layer to neutralize the high charge density.