Crosslinking biopolymers for biomedical applications

Poly(N-isopropylacrylamide)-Based Hydrogels for Biomedical Applications: A Review of the State-of-the-Art

A prominent research topic in contemporary advanced functional materials science is the production of smart materials based on polymers that may independently adjust their physical and/or chemical characteristics when subjected to external stimuli. Smart hydrogels based on poly(N-isopropylacrylamide) (PNIPAM) demonstrate distinct thermoresponsive features close to a lower critical solution temperature (LCST) that enhance their capability in various biomedical applications such as drug delivery, tissue engineering, and wound dressings. Nevertheless, they have intrinsic shortcomings such as poor mechanical properties, limited loading capacity of actives, and poor biodegradability. Formulation of PNIPAM with diverse functional constituents to develop hydrogel composites is an efficient scheme to overcome these defects, which can significantly help for practicable application. This review reports on the latest developments in functional PNIPAM-based smart hydrogels for various biomedical applications. The first section describes the properties of PNIPAM-based hydrogels, followed by potential applications in diverse fields. Ultimately, this review summarizes the challenges and opportunities in this emerging area of research and development concerning this fascinating polymer-based system deep-rooted in chemistry and material science.

Synthesis and characterization of an engineered dual crosslinked hydrogel system based on hyaluronic acid, chondroitin sulfate, and carboxymethyl chitosan with platelet‐rich plasma

Hydrogels play a key role in cartilage tissue engineering (CTE) and cell transplantation. Idealy, the hydrogels designed for CTE should facilitate the formation of cartilage ECM, cilinically. However, challenges remain to engineer hydrogels with controllable responses, fast‐self recovery, and high stability. In the present study, a dual crosslinked hydrogel system based on the electrostatic and ionic bonds by mixing polymers composed of hyaluronic acid (HA), chondroitin sulfate (CS), and carboxymethyl chitosan (CMC) combined with platelet‐rich plasma (PRP) was successfully prepared. To increase the stability of hydrogel, 1‐Ethyl‐3‐(3‐dimethylamino propyl‐carbodiimide hydrochloride (EDC)/N‐hydroxy‐succinimide (NHS) was used as the crosslinking agent. The results revealed more stability of dual crosslinking hydrogel (HC54) due to proper stoichiometric ratio between polymers components and the crosslinking agent. According to the rheology results, a non‐Newtonian and viscoelastic behavior was recognized for all hydrogels and the highest mechanical property (modulus) of HC54 hydrogel was confirmed. Based on the SEM micrographs and weight loss analysis, the lowest degradation rate was observed for the HC54 hydrogel after immersion in phosphate buffered saline solution. PRP release from the hydrogel was analyzed with the Bradford assay method and a cumulative release of 50 percent during 15 days was found. Finally, the MTT assay conducted on dual crosslinked HA/CS/CMC hydrogel with and without PRP both demonstrated cytocompatibility of hydrogel while the presence of PRP enhanced the cell viability.

Alginate-Lysozyme Nanofibers Hydrogels with Improved Rheological Behavior, Printability and Biological Properties for 3D Bioprinting Applications

In this study, alginate nanocomposite hydrogel bioinks reinforced with lysozyme nanofibers (LNFs) were developed. Alginate-LNF (A-LNF) suspensions with different LNF contents (1, 5 and 10 wt.%) were prepared and pre-crosslinked with 0.5% (w/v) CaCl₂ to formulate A-LNF inks. These inks exhibit proper shear-thinning behavior and good recovery properties (~90%), with the pre-crosslinking step playing a crucial role. A-LNF fully crosslinked hydrogels (with 2% (w/v) CaCl₂) that mimic 3D printing scaffolds were prepared, and it was observed that the addition of LNFs improved several properties of the hydrogels, such as the morphology, swelling and degradation profiles, and mechanical properties. All formulations are also noncytotoxic towards HaCaT cells. The printing parameters and 3D scaffold model were then optimized, with A-LNF inks showing improved printability. Selected A-LNF inks (A-LNF0 and A-LNF5) were loaded with HaCaT cells (cell density 2 × 10⁶ cells mL⁻¹), and the cell viability within the bioprinted scaffolds was evaluated for 1, 3 and 7 days, with scaffolds printed with the A-LNF5 bioink showing the highest values for 7 days (87.99 ± 1.28%). Hence, A-LNF bioinks exhibited improved rheological performance, printability and biological properties representing a good strategy to overcome the main limitations of alginate-based bioinks.

Critical Review on Polylactic Acid: Properties, Structure, Processing, Biocomposites, and Nanocomposites

Composite materials are emerging as a vital entity for the sustainable development of both humans and the environment. Polylactic acid (PLA) has been recognized as a potential polymer candidate with attractive characteristics for applications in both the engineering and medical sectors. Hence, the present article throws lights on the essential physical and mechanical properties of PLA that can be beneficial for the development of composites, biocomposites, films, porous gels, and so on. The article discusses various processes that can be utilized in the fabrication of PLA-based composites. In a later section, we have a detailed discourse on the various composites and nanocomposites-based PLA along with the properties’ comparisons, discussing our investigation on the effects of various fibers, fillers, and nanofillers on the mechanical, thermal, and wear properties of PLA. Lastly, the various applications in which PLA is used extensively are discussed in detail.

A Guide to Polysaccharide-Based Hydrogel Bioinks for 3D Bioprinting Applications

Three-dimensional (3D) bioprinting is an innovative technology in the biomedical field, allowing the fabrication of living constructs through an approach of layer-by-layer deposition of cell-laden inks, the so-called bioinks. An ideal bioink should possess proper mechanical, rheological, chemical, and biological characteristics to ensure high cell viability and the production of tissue constructs with dimensional stability and shape fidelity. Among the several types of bioinks, hydrogels are extremely appealing as they have many similarities with the extracellular matrix, providing a highly hydrated environment for cell proliferation and tunability in terms of mechanical and rheological properties. Hydrogels derived from natural polymers, and polysaccharides, in particular, are an excellent platform to mimic the extracellular matrix, given their low cytotoxicity, high hydrophilicity, and diversity of structures. In fact, polysaccharide-based hydrogels are trendy materials for 3D bioprinting since they are abundant and combine adequate physicochemical and biomimetic features for the development of novel bioinks. Thus, this review portrays the most relevant advances in polysaccharide-based hydrogel bioinks for 3D bioprinting, focusing on the last five years, with emphasis on their properties, advantages, and limitations, considering polysaccharide families classified according to their source, namely from seaweed, higher plants, microbial, and animal (particularly crustaceans) origin.

Crosslinked Chitosan-Gelatin Biocompatible Nanocomposite as a Neuro Drug Carrier

The polymers, chitosan, a polysaccharide, and gelatin, a protein, are crosslinked in different ratios without the aid of a crosslinking agent. Facile chemical reactions were followed to synthesize a chitosan/gelatin nanocomposite in three different ratios (1:1, 1:3, and 3:1). The solubility of chitosan and the stability of gelatin were improved due to the crosslinking. Both the polymers have excellent biodegradability, biocompatibility, adhesion, and absorption properties in a biological environment. The properties of the composite were favorable to be used in drug delivery applications, and the drug dopamine was encapsulated in the composite for all three ratios. The properties of the chitosan/gelatin nanocomposite and dopamine-loaded chitosan/gelatin nanocomposite were examined using XRD, FTIR, SEM, UV, TGA, TEM, and DLS techniques, and the crosslinking was confirmed. Higuchi kinetic release was seen with a cumulative release of 93% within 24 h for the 1:3 nanocomposite in a neutral medium. The peaks at 9 and 20° in the XRD spectrum confirmed the encapsulation of dopamine with the increase in the crystallinity of chitosan, which is also evident from the SAED image. The dopamine functional groups were confirmed from the IR peaks between 500 and 1500 cm^-1 and the wide UV absorption maxima between 250 and 290 nm. The particle size of the drug-loaded composite in the ratios 1:1, 1:3, and 3:1 were calculated to be 275, 405, and 355 nm, respectively. The nanocomposite also showed favorable DPPH antioxidant and antibacterial activity againstStaphylococcus aureus. Sustained release of dopamine in a neutral medium using crosslinked chitosan and gelatin without the presence of a crosslinker is the highlight of the work.

Effect of crosslinking strategy on the biological, antibacterial and physicochemical performance of hyaluronic acid and ɛ-polylysine based hydrogels

The design of multifunctional hydrogels based on bioactive hyaluronic acid (HA) and antibacterial cationic polymer ɛ-poly-l-lysine (ε-PL) is a promising tool in tissue engineering applications. In the current study, we have designed hyaluronic acid and ɛ-polylysine composite hydrogel systems with antibacterial and cell attractive properties. Two distinct crosslinking approaches were used: the physical crosslinking based on electrostatic attractions and the chemical crosslinking of charged functional groups (-NH₂ and -COOH). The impact of the crosslinking strategy on fabricated hydrogel molecular structure, swelling behavior, gel fraction, morphology, porosity, viscoelastic properties, antibacterial activity, and in vitro biocompatibility was evaluated. Both chemically and physically crosslinked HA/ԑ-PL hydrogels demonstrated fast swelling behavior and long-term stability for at least 28 days, as well as similar order of stiffness (10-30 kPa). We demonstrated that physically crosslinked hydrogels inhibited over 99.999% of Gram-negative E. coli, while chemically crosslinking strategy led to the antibacterial efficiency decrease. However, cell viability was significantly improved, confirming the importance of the applied crosslinking approach to the antibacterial activity and in vitro biocompatibility. The distinct differences in the physicochemical and biological properties of the developed materials provide new opportunities to design next-generation functional composite hydrogel systems.

Genipin-Crosslinking Effects on Biomatrix Development for Cutaneous Wound Healing: A Concise Review

Split skin graft (SSG), a standard gold treatment for wound healing, has numerous limitations such as lack of fresh skin to be applied, tedious process, severe scarring, and keloid formation followed by higher risks of infection. Thus, there is a gap in producing polymeric scaffolds as an alternative for wound care management. Bioscaffold is the main component in tissue engineering technology that provides porous three-dimensional (3D) microarchitecture for cells to survive. Upon skin tissue reconstruction, the 3D-porous structure ensures sufficient nutrients and gaseous diffusion and cell penetration that improves cell proliferation and vascularization for tissue regeneration. Hence, it is highly considered a promising candidate for various skin wound healing applications. To date, natural-based crosslinking agents have been extensively used to tailor the physicochemical and mechanical properties of the skin biomatrix. Genipin (GNP) is preferable to other plant-based crosslinkers due to its biological activities, such as antiinflammatory and antioxidant, which are key players to boost skin wound healing. In addition, it has shown a noncytotoxic effect and is biocompatible with human skin cells. This review validated the effects of GNP in biomatrix fabrication for skin wound healing from the last 7 years of established research articles and stipulated the biomaterial development-scale point of view. Lastly, the possible role of GNP in the skin wound healing cascade is also discussed. Through the literature output, it can be concluded that GNP has the capability to increase the stability of biomatrix and maintain the skin cells viability, which will contribute in accelerating wound healing.

Revealing Localised Mechanochemistry of Biomaterials Using In Situ Multiscale Chemical Analysis

The study of mechanical and chemical phenomena arising within a material that is being subjected to external stress is termed mechanochemistry (MC). Recent advances in MC have revealed the prospect not only to enable a greener route to chemical transformations but also to offer previously unobtainable opportunities in the production and screening of biomaterials. To date, the field of MC has been constrained by the inability of current characterisation techniques to provide essential localised multiscale chemically mapping information. A potential method to overcome this is secondary electron hyperspectral imaging (SEHI). SEHI is a multiscale material characterisation technique applied within a scanning electron microscope (SEM). Based on the collection of secondary electron (SE) emission spectra at low primary beam energies, SEHI is applicable to the chemical assessment of uncoated polymer surfaces. Here, we demonstrate that SEHI can provide in situ MC information using poly(glycerol sebacate)-methacrylate (PGS-M) as an example biomaterial of interest. This study brings the use of a bespoke in situ SEM holder together with the application of SEHI to provide, for the first time, enhanced biomaterial mechanochemical characterisation.

Analysis of the aggregation mechanism of chondroitin sulfate/chitosan particles and fabrication of hydrogel cell scaffolds

In this study, the aggregation mechanism of polyion complex (PIC) particles from chitosan (CHI) and chondroitin sulfate C (CS) in phosphate-buffered saline (PBS) was analyzed, and a novel method for the fabrication of hydrogels via aggregation was developed. The PBS induced a decrease in the ζ-potential of the CS/CHI PIC particles, increase in their diameter, and aggregation in a concentration-dependent manner. The hydrogels prepared by mixing CS/CHI PIC particle dispersion and PBS showed the PIC components, with porous structure, high swelling ratio (161.4 ± 13.3%), and high storage moduli (26.2 ± 1.4 kPa). By mixing PBS with suspended adhesive cells and CS/CHI PIC particle dispersion, hydrogels with high cell-loading efficiency were successfully synthesized. The loaded cells within the hydrogels exhibited high viability, uniform distribution, and formation of cell aggregates. These results indicate that CS/CHI-based hydrogels have a potential application as three-dimensional scaffolds for cell culture in tissue engineering.

Metal Complexation of Arabinoxylan Engenders a Smart Material Offering pH, Solvents, and Salt Responsive On–Off Swelling with the Potential for Sustained Drug Delivery

The present study aimed to develop a stable interconnected matrix as a sustained release drug delivery material. Arabinoxylan (AX) was extracted from ispaghula husk and then crosslinked with different concentrations, i.e., 0.5, 1.0, and 1.5 g of CaCl₂ per 0.25 g of AX. The crosslinking was confirmed through Fourier transform infrared spectroscopy. The swelling capacity of crosslinked AX (CL-AX) was evaluated against buffer solutions of pH 1.2, 6.8, 7.4, and water. The swelling capacity increased from pH 1.2 to pH 7.4 and followed the second order swelling kinetics. The swelling study also revealed that CL-AX with 1.0 g CaCl₂ showed maximum swelling capacity. The swelling–deswelling (on–off switching) behavior of CL-AX was evaluated in water–ethanol, water–0.9% NaCl solution, and buffer solutions of pH 7.4–1.2 and showed responsive swelling–deswelling behavior. Scanning electron microscopy revealed a highly porous nature of CL-AX with a mesh of thin fibrous networking. Hemocompatibility studies of CL-AX revealed its non-thrombogenic and nonhemolytic attributes. The CL-AX matrix tablet prolonged the release of enalapril maleate for 24 h, and the drug release followed the zero order kinetics and super case-II transport mechanism. Therefore, CL-AX can be recognized as a stimuli responsive and hemocompatible biomaterial with sustained drug release potential.

Direct Ink Writing of Biocompatible Nanocellulose and Chitosan Hydrogels for Implant Mesh Matrices

Direct ink writing via single or multihead extrusion is used to synthesize layer-by-layer (LbL) meshes comprising renewable polysaccharides. The best mechanical performance (683 ± 63 MPa modulus and 2.5 ± 0.4 MPa tensile strength) is observed for 3D printed structures with full infill density, given the role of electrostatic complexation between the oppositely charged components (chitosan and cellulose nanofibrils). The LbL structures develop an unexpectedly high wet stability that undergoes gradual weight loss at neutral and slightly acidic pH. The excellent biocompatibility and noncytotoxicity toward human monocyte/macrophages and controllable shrinkage upon solvent exchange make the cellular meshes appropriate for use as biomedical implants.

Platelet-rich plasma-hyaluronic acid/chondrotin sulfate/carboxymethyl chitosan hydrogel for cartilage regeneration

In this study, the chondrogenic potential of hyaluronic acid/chondrotin sulfate/carboxymethyl chitosan hydrogels with adipose-derived mesenchymal stem cells (ADMSCs) was evaluated. Here, hyaluronic acid, chondrotin sulfate, and carboxymethyl chitosan were used as the substrate for cartilage tissue engineering in which the hydrogel is formed due to electrostatic and hydrogen bonds through mixing the polymers. Because of the instability of this hydrogel in the biological environment, 1-ethyl-3-(3-dimethylaminopropyl-carbodiimide hydrochloride/N-hydroxy-succinimide was used as a crosslinker to increase the hydrogel stability. The hydrogels showed reasonable stability due to the combined effect of self-crosslinking and chemical crosslinking. The cells were treated with the prepared hydrogel samples for 14 and 21 days in nondifferentiation medium for evaluation of the cellular behavior of ADMSCs. Gene expression evaluation was performed, and expression of specific genes involved in differentiation was shown in the crosslinked hydrogel with platelet-rich plasma (PRP) (H-EN-P) had increased the gene expression levels. Quantification of immunofluorescence intensity indicated the high level of expression of SOX9 in H-EN-P hydrogel. Based on the results, we confirmed that the presence of PRP and the similarity of the hydrogel constituents to the cartilage extracellular matrix could have positive effects on the differentiation of the cells, which is favorable for cartilage tissue engineering approaches.

Crosslinkers for polysaccharides and proteins: Synthesis conditions, mechanisms, and crosslinking efficiency, a review

Polysaccharides and proteins are important macromolecules for developing hydrogels devoted to biomedical applications. Chemical hydrogels offer chemical, mechanical, and dimensional stability than physical hydrogels due to the chemical bonds among the chains mediated by crosslinkers. There are many crosslinkers to synthesize polysaccharides and proteins based on hydrogels. In this review, we revisited the crosslinking reaction mechanisms between synthetic or natural crosslinkers and polysaccharides or proteins. The selected synthetic crosslinkers were glutaraldehyde, carbodiimide, boric acid, sodium trimetaphosphate, N,N'-methylene bisacrylamide, and polycarboxylic acid, whereas the selected natural crosslinkers included transglutaminase, tyrosinase, horseradish peroxidase, laccase, sortase A, genipin, vanillin, tannic acid, and phytic acid. No less important are the reactions involving click chemistry and the macromolecular crosslinkers for polysaccharides and proteins. Literature examples of polysaccharides or proteins crosslinked by the different strategies were presented along with the corresponding highlights. The general mechanism involved in chemical crosslinking mediated by gamma and UV radiation was discussed, with particular attention to materials commonly used in digital light processing. The evaluation of crosslinking efficiency by gravimetric measurements, rheology, and spectroscopic techniques was presented. Finally, we presented the challenges and opportunities to create safe chemical hydrogels for biomedical applications.

Addition of High Acyl Gellan Gum to Low Acyl Gellan Gum Enables the Blends 3D Bioprintable

Long-term stability of gellan gum (GG) at physiological conditions is expected, as very low concentration of divalent ions are required for crosslinking, as compared to alginate—which is extensively used for tissue engineering (TE) applications. Hence, GG is proposed as an ideal candidate to substitute alginate for TE. Deacylated (low acyl; LA) GG forms brittle gels, thus only low concentrations were used for cell encapsulation, whereas acylated (high acyl; HA) GG forms weak/soft gels. 3D bioprinting using pure LAGG or HAGG is not possible owing to their rheological properties. Here, we report development and characterization of bioprintable blends of LAGG and HAGG. Increase in HAGG in the blends improved shear recovery and shape fidelity of printed scaffolds. Low volumetric swelling observed in cell culture conditions over 14 days indicates stability. Volumetric scaffolds were successfully printed and their mechanical properties were determined by uniaxial compressive testing. Mesenchymal stem cells bioprinted in blends of 3% LAGG and 3% HAGG survived the printing process showing >80% viability; a gradual decrease in cell numbers was observed over 21 days of culture. However, exploiting intrinsic advantages of 3D bioprinting, LAGG/HAGG blends open up numerous possibilities to improve and/or tailor various aspects required for TE.

Pectin Microspheres: Synthesis Methods, Properties, and Their Multidisciplinary Applications

There is great contemporary interest in using cleaner technologies through green chemistry and utilizing biopolymers as raw material. Pectin is found on plant cell walls, and it is commonly extracted from fruit shells, mostly apples or citrus fruits. Pectin has applications in many areas of commercial relevance; for this reason, it is possible to find available information about novel methods to transform pectin and pursuing enhanced features, with the structuring of biopolymer microspheres being highly cited to enhance its activity. The structuring of polymers is a technique that has been growing in recent decades, due to its potential for diverse applications in various fields of science and technology. Several techniques are used for the synthesis of microspheres, such as ionotropic gelation, extrusion, aerosol drying, or emulsions, with the latter being the most commonly used method based on its reproducibility and simplicity. The most cited applications are in drug delivery, especially for the treatment of colon diseases and digestive-tract-related issues. In the industrial field, it is used for protecting encapsulated compounds; moreover, the environmental applications mainly include the bioremediation of toxic substances. However, there are still many possibilities for expanding the use of this biopolymer in the environmental field.

Biopolymer: A Sustainable Material for Food and Medical Applications

Biopolymers are a leading class of functional material suitable for high-value applications and are of great interest to researchers and professionals across various disciplines. Interdisciplinary research is important to understand the basic and applied aspects of biopolymers to address several complex problems associated with good health and well-being. To reduce the environmental impact and dependence on fossil fuels, a lot of effort has gone into replacing synthetic polymers with biodegradable materials, especially those derived from natural resources. In this regard, many types of natural or biopolymers have been developed to meet the needs of ever-expanding applications. These biopolymers are currently used in food applications and are expanding their use in the pharmaceutical and medical industries due to their unique properties. This review focuses on the various uses of biopolymers in the food and medical industry and provides a future outlook for the biopolymer industry.

New Insights of Scaffolds Based on Hydrogels in Tissue Engineering

In recent years, biomaterials development and characterization for new applications in regenerative medicine or controlled release represent one of the biggest challenges. Tissue engineering is one of the most intensively studied domain where hydrogels are considered optimum applications in the biomedical field. The delicate nature of hydrogels and their low mechanical strength limit their exploitation in tissue engineering. Hence, developing new, stronger, and more stable hydrogels with increased biocompatibility, is essential. However, both natural and synthetic polymers possess many limitations. Hydrogels based on natural polymers offer particularly high biocompatibility and biodegradability, low immunogenicity, excellent cytocompatibility, variable, and controllable solubility. At the same time, they have poor mechanical properties, high production costs, and low reproducibility. Synthetic polymers come to their aid through superior mechanical strength, high reproducibility, reduced costs, and the ability to regulate their composition to improve processes such as hydrolysis or biodegradation over variable periods. The development of hydrogels based on mixtures of synthetic and natural polymers can lead to the optimization of their properties to obtain ideal scaffolds. Also, incorporating different nanoparticles can improve the hydrogel's stability and obtain several biological effects. In this regard, essential oils and drug molecules facilitate the desired biological effect or even produce a synergistic effect. This study's main purpose is to establish the main properties needed to develop sustainable polymeric scaffolds. These scaffolds can be applied in tissue engineering to improve the tissue regeneration process without producing other side effects to the environment.

Biomaterial-based strategies for in vitro neural models

In vitro models have been used as a complementary tool to animal studies in understanding the nervous system's physiological mechanisms and pathological disorders, while also serving as platforms to evaluate the safety and efficiency of therapeutic candidates. Following recent advances in materials science, micro- and nanofabrication techniques and cell culture systems, in vitro technologies have been rapidly gaining the potential to bridge the gap between animal and clinical studies by providing more sophisticated models that recapitulate key aspects of the structure, biochemistry, biomechanics, and functions of human tissues. This was made possible, in large part, by the development of biomaterials that provide cells with physicochemical features that closely mimic the cellular microenvironment of native tissues. Due to the well-known material-driven cellular response and the importance of mimicking the environment of the target tissue, the selection of optimal biomaterials represents an important early step in the design of biomimetic systems to investigate brain structures and functions. This review provides a comprehensive compendium of commonly used biomaterials as well as the different fabrication techniques employed for the design of neural tissue models. Furthermore, the authors discuss the main parameters that need to be considered to develop functional platforms not only for the study of brain physiological functions and pathological processes but also for drug discovery/development and the optimization of biomaterials for neural tissue engineering.

Challenges and recent trends with the development of hydrogel fiber for biomedical applications

Hydrogel is the most emblematic soft material which possesses significantly tunable and programmable characteristics. Polymer hydrogels possess significant advantages including, biocompatible, simple, reliable and low cost. Therefore, research on the development of hydrogel for biomedical applications has been grown intensely. However, hydrogel development is challenging and required significant effort before the application at an industrial scale. Therefore, the current work focused on evaluating recent trends and issues with hydrogel development for biomedical applications. In addition, the hydrogel's development methodology, physicochemical properties, and biomedical applications are evaluated and benchmarked against the reported literature. Later, biomedical applications of the nano-cellulose-based hydrogel are considered and critically discussed. Based on a detailed review, it has been found that the surface energy, intermolecular interactions, and interactions of hydrogel adhesion forces are major challenges that contribute to the development of hydrogel. In addition, compared to other hydrogels, nanocellulose hydrogels demonstrated higher potential for drug delivery, 3D cell culture, diagnostics, tissue engineering, tissue therapies and gene therapies. Overall, nanocellulose hydrogel has the potential for commercialization for different biomedical applications.

Crosslink bio-adhesives for bronchoscopic lung volume reduction: current status and future direction

Several bronchoscopic lung volume reduction (BLVR) treatments have been developed to reduce hyperinflation in emphysema patients. Lung bio-adhesives are among the most promising new BLVR treatment options, as they potentially provide a permanent solution for emphysematous patients after only a single application. To date, bio-adhesives have mainly been used as haemostats and tissue sealants, while their application in permanently contracting and sealing hyperinflated lung tissue has recently been identified as a novel and enticing opportunity. However, a major drawback of the current adhesive technology is the induction of severe inflammatory responses and adverse events upon administration. In our review, we distinguish between and discuss various natural, semi-synthetic and synthetic tissue haemostats and sealants that have been used for pulmonary applications such as sealing air/fluid leaks. Furthermore, we present an overview of the different materials including AeriSeal and autologous blood that have been used to achieve lung volume reduction and discuss their respective advantages and drawbacks. In conclusion, we describe the key biological (therapeutic benefit and biocompatibility) and biomechanical (degradability, adhesive strength, stiffness, viscoelasticity, tunability and self-healing capacity) characteristics that are essential for an ideal lung bio-adhesive material with the potential to overcome the concerns related to current adhesives.

A Review of Biopolymers' Utility as Emulsion Stabilizers

Polysaccharides, polynucleotides, and polypeptides are basic natural polymers. They have various applications based on their properties. This review mostly discusses the application of natural polymers as emulsion stabilizers. Natural emulsion stabilizers are polymers of amino acid, nucleic acid, carbohydrate, etc., which are derived from microorganisms, bacteria, and other organic materials. Plant and animal proteins are basic sources of natural emulsion stabilizers. Pea protein-maltodextrin and lentil protein feature entrapment capacity up to 88%, (1-10% concentrated), zein proteins feature 74-89% entrapment efficiency, soy proteins in various concentrations increase dissolution, retention, and stability to the emulsion and whey proteins, egg proteins, and proteins from all other animals are applicable in membrane formation and encapsulation to stabilize emulsion/nanoemulsion. In pharmaceutical industries, phospholipids, phosphatidyl choline (PC), phosphatidyl ethanol-amine (PE), and phosphatidyl glycerol (PG)-based stabilizers are very effective as emulsion stabilizers. Lecithin (a combination of phospholipids) is used in the cosmetics and food industries. Various factors such as temperature, pH, droplets size, etc. destabilize the emulsion. Therefore, the emulsion stabilizers are used to stabilize, preserve and safely deliver the formulated drugs, also as a preservative in food and stabilizer in cosmetic products. Natural emulsion stabilizers offer great advantages because they are naturally degradable, ecologically effective, non-toxic, easily available in nature, non-carcinogenic, and not harmful to health.

Sustainable production of curable maltodextrin-based electrospun microfibers

Maltodextrins are inexpensive, water-soluble starch hydrolysis products composed of high molecular weight polysaccharide molecules. This feature allows their water solutions to be processed by electrospinning to produce bio-based microfibrous mats. Also, the presence of hydroxyl functions along the maltodextrin's backbone enables cross-linking reactions to be performed, necessary to overcome the intrinsic solubility of the starting material, by exploiting suitable functional molecules. In this work, the electrospinning process to obtain fibre deposition from water solutions of five different commercial maltodextrins was firstly optimized. Well-defined fibres with diameters ranging between 1.1 μm and 1.5 μm were successfully obtained using water as the unique solvent. Subsequently, the same maltodextrin-containing water solutions with citric acid added were then processed again. The presence of citric acid did not hinder the spinnability of the studied systems, while the possibility to achieve a one-step thermal curing of the obtained fibres was proved via solubility tests, TGA, and FTIR-ATR analyses. Eventually, bio-based cross-linked mats with fibre diameters ranging from 0.7 μm to 1.4 μm were obtained from the electrospinning of commercial maltodextrins and citric acid, employing water as the unique solvent and environmentally friendly curing processes. This approach enables the reported mats to be further studied for environmental, pharmaceutical, and medical applications.

Cationic, anionic and neutral polysaccharides for skin tissue engineering and wound healing applications

Today, chronic wound care and management can be regarded as a clinically critical issue. However, the limitations of current approaches for wound healing have encouraged researchers and physicians to develop more efficient alternative approaches. Advances in tissue engineering and regenerative medicine have resulted in the development of promising approaches that can accelerate wound healing and improve the skin regeneration rate and quality. The design and fabrication of scaffolds that can address the multifactorial nature of chronic wound occurrence and provide support for the healing process can be considered an important area requiring improvement. In this regard, polysaccharide-based scaffolds have distinctive properties such as biocompatibility, biodegradability, high water retention capacity and nontoxicity, making them ideal for wound healing applications. Their tunable structure and networked morphology could facilitate a number of functions, such as controlling their diffusion, maintaining wound moisture, absorbing a large amount of exudates and facilitating gas exchange. In this review, the wound healing process and the influential factors, structure and properties of carbohydrate polymers, physical and chemical crosslinking of polysaccharides, scaffold fabrication techniques, and the use of polysaccharide-based scaffolds in skin tissue engineering and wound healing applications are discussed.

Hydrogel, Electrospun and Composite Materials for Bone/Cartilage and Neural Tissue Engineering

Injuries of the bone/cartilage and central nervous system are still a serious socio-economic problem. They are an effect of diversified, difficult-to-access tissue structures as well as complex regeneration mechanisms. Currently, commercially available materials partially solve this problem, but they do not fulfill all of the bone/cartilage and neural tissue engineering requirements such as mechanical properties, biochemical cues or adequate biodegradation. There are still many things to do to provide complete restoration of injured tissues. Recent reports in bone/cartilage and neural tissue engineering give high hopes in designing scaffolds for complete tissue regeneration. This review thoroughly discusses the advantages and disadvantages of currently available commercial scaffolds and sheds new light on the designing of novel polymeric scaffolds composed of hydrogels, electrospun nanofibers, or hydrogels loaded with nano-additives.

Synthesis of Fluorinated Polyhydroxyalkanoates from Marine Bioresources as a Promising Biomaterial Coating

By successive enzymatic and chemical modifications, novel fluorinated polyhydroxyalkanoates were synthesized and characterized. Unsaturated polyhydroxyalkanoate, PHAU, was first produced by fermentation using marine bacteria Pseudomonas raguenesii, and a graft copolymer PHAU-g-C₈F₁₇ was further prepared by controlled thiol-ene reaction in the presence of perfluorodecanethiol (PFDT). The PFDT grafting is realized by two different processes. In the first method, PHAU was previously solubilized in toluene. The grafting in solution is more efficient than the direct heterogeneous grafting onto a PHAU film. The degrees of grafting were determined by ¹H NMR. The characterization of the microstructure by SEM-EDX and modulated and conventional DSC showed the formation of microdomains due to the organization of the hydrophobic segments of graft PFDT. Biomaterials prepared by 3D printing and coated by PHAU-g-C₈F₁₇ have the potential to be used as novel contrast agents as shown by Hahn echo experiments.

Hyaluronic Acid Hydrogels for Controlled Pulmonary Drug Delivery-A Particle Engineering Approach

Hydrogels warrant attention as a potential material for use in sustained pulmonary drug delivery due to their swelling and mucoadhesive features. Herein, hyaluronic acid (HA) is considered a promising material due to its therapeutic potential, the effect on lung inflammation, and possible utility as an excipient or drug carrier. In this study, the feasibility of using HA hydrogels (without a model drug) to engineer inhalation powders for controlled pulmonary drug delivery was assessed. A combination of chemical crosslinking and spray-drying was proposed as a novel methodology for the preparation of inhalation powders. Different crosslinkers (urea; UR and glutaraldehyde; GA) were exploited in the hydrogel formulation and the obtained powders were subjected to extensive characterization. Compositional analysis of the powders indicated a crosslinked structure of the hydrogels with sufficient thermal stability to withstand spray drying. The obtained microparticles presented a spherical shape with mean diameter particle sizes from 2.3 ± 1.1 to 3.2 ± 2.9 μm. Microparticles formed from HA crosslinked with GA exhibited a reasonable aerosolization performance (fine particle fraction estimated as 28 ± 2%), whereas lower values were obtained for the UR-based formulation. Likewise, swelling and stability in water were larger for GA than for UR, for which the results were very similar to those obtained for native (not crosslinked) HA. In conclusion, microparticles could successfully be produced from crosslinked HA, and the ones crosslinked by GA exhibited superior performance in terms of aerosolization and swelling.

A sandcastle worm-inspired strategy to functionalize wet hydrogels

Hydrogels have been extensively used in many fields. Current synthesis of functional hydrogels requires incorporation of functional molecules either before or during gelation via the pre-organized reactive site along the polymer chains within hydrogels, which is tedious for polymer synthesis and not flexible for different types of hydrogels. Inspired by sandcastle worm, we develop a simple one-step strategy to functionalize wet hydrogels using molecules bearing an adhesive dibutylamine-DOPA-lysine-DOPA tripeptide. This tripeptide can be easily modified with various functional groups to initiate diverse types of polymerizations and provide functional polymers with a terminal adhesive tripeptide. Such functional molecules enable direct modification of wet hydrogels to acquire biological functions such as antimicrobial, cell adhesion and wound repair. The strategy has a tunable functionalization degree and a stable attachment of functional molecules, which provides a tool for direct and convenient modification of wet hydrogels to provide them with diverse functions and applications.

Smart and Biomimetic 3D and 4D Printed Composite Hydrogels: Opportunities for Different Biomedical Applications

In recent years, smart/stimuli-responsive hydrogels have drawn tremendous attention for their varied applications, mainly in the biomedical field. These hydrogels are derived from different natural and synthetic polymers but are also composite with various organic and nano-organic fillers. The basic functions of smart hydrogels rely on their ability to change behavior; functions include mechanical, swelling, shaping, hydrophilicity, and bioactivity in response to external stimuli such as temperature, pH, magnetic field, electromagnetic radiation, and biological molecules. Depending on the final applications, smart hydrogels can be processed in different geometries and modalities to meet the complicated situations in biological media, namely, injectable hydrogels (following the sol-gel transition), colloidal nano and microgels, and three dimensional (3D) printed gel constructs. In recent decades smart hydrogels have opened a new horizon for scientists to fabricate biomimetic customized biomaterials for tissue engineering, cancer therapy, wound dressing, soft robotic actuators, and controlled release of bioactive substances/drugs. Remarkably, 4D bioprinting, a newly emerged technology/concept, aims to rationally design 3D patterned biological matrices from synthesized hydrogel-based inks with the ability to change structure under stimuli. This technology has enlarged the applicability of engineered smart hydrogels and hydrogel composites in biomedical fields. This paper aims to review stimuli-responsive hydrogels according to the kinds of external changes and t recent applications in biomedical and 4D bioprinting.

Enhanced Cellular Cryopreservation by Biopolymer-Associated Suppression of RhoA/ROCK Signaling Pathway

With increasing demands on long-term storage of cells, cryopreservation of cells is gaining more importance in cell-based research and applications. Dimethyl sulfoxide (DMSO) is a commonly used chemical cryoprotectant, providing increased cell survival during the freezing process. However, its use is limited in clinical applications due to its low biocompatibility above cryogenic temperatures. Herein, we present a new approach for reducing the use of DMSO in cryopreservation by using biodegradable hyaluronic acids (HAs). By adding HAs into cryoprotectant media containing a low concentration of DMSO, higher cell viability and cell proliferation rate were observed upon thawing after cryopreservation. The HA-supplemented cryopreservation media did not reduce the size of the ice crystal, which significantly influenced cell viability during cell freezing, but decreased the Ras homolog family member A (RhoA)/Rho-associated protein kinase (ROCK) signaling pathway related to apoptosis. The cell-interactive cryoprotectants containing HA can be applied to the development of a new cryoprotectant that reduces the adverse effect of DMSO.

Advanced Application of Electrospun Polycaprolactone Fibers for Seed Germination Activity

The increasing intensity of coronavirus (COVID-19) spreading emphasizes the significant development in home food production to reduce the incoming socioeconomic impact from soaring food prices, supply chain fragility, and severe economic crisis. This preliminary study was initiated to demonstrate the possibility of using electrospun fibers as a potential substrate in the application of seed germination activity. The drive of this preliminary study was to integrate the electrospun nanofiber-based material in exploring the current surge in home food production via seed germination in order to introduce cheap source of food without being distracted by the pandemic impact in general. Mung bean (Vigna radiata L. Wilczek) was chosen as it is easy and fast to sprout. Four samples of poly (ε-caprolactone)- (PCL-) based fibers were prepared by means of electrospinning technique, with the optimized flow rate between 0.05 and 0.20 ml/min at a fixed distance of 10 cm needle tip to collector. Mung bean seeds were allowed to germinate on the fabricated electrospun PCL fibers for 96 hours. Our observations include germination percentage, seedling weight, radicle length, and plumule growth. The highest radicle length and plumule length of seedlings were 27.8 mm and 6.7 mm, respectively. There were no inhibitory effects on seed germination and minimal structural fragmentation of smaller diameter electrospun fibers as revealed by FESEM. These results show that the seeds were able to germinate on electrospun PCL fiber substrate, owing to the properties of high surface area and excellent fluid water uptake of PCL fibers.

Recent trends in gelatin methacryloyl nanocomposite hydrogels for tissue engineering

Gelatin methacryloyl (GelMA), a photocrosslinkable gelatin-based hydrogel, has been immensely used for diverse applications in tissue engineering and drug delivery. Apart from its excellent functionality and versatile mechanical properties, it is also suitable for a wide range of fabrication methodologies to generate tissue constructs of desired shapes and sizes. Despite its exceptional characteristics, it is predominantly limited by its weak mechanical strength, as some tissue types naturally possess high mechanical stiffness. The use of high GelMA concentrations yields high mechanical strength, but not without the compromise in its porosity, degradability, and three-dimensional (3D) cell attachment. Recently, GelMA has been blended with various natural and synthetic biomaterials to reinforce its physical properties to match with the tissue to be engineered. Among these, nanomaterials have been extensively used to form a composite with GelMA, as they increase its biological and physicochemical properties without affecting the unique characteristics of GelMA and also introduce electrical and magnetic properties. This review article presents the recent advances in the formation of hybrid GelMA nanocomposites using a variety of nanomaterials (carbon, metal, polymer, and mineral-based). We give an overview of each nanomaterial's characteristics followed by a discussion of the enhancement in GelMA's physical properties after its incorporation. Finally, we also highlight the use of each GelMA nanocomposite for different applications, such as cardiac, bone, and neural regeneration.

Collagen Bioinks for Bioprinting: A Systematic Review of Hydrogel Properties, Bioprinting Parameters, Protocols, and Bioprinted Structure Characteristics

Bioprinting is a modern tool suitable for creating cell scaffolds and tissue or organ carriers from polymers that mimic tissue properties and create a natural environment for cell development. A wide range of polymers, both natural and synthetic, are used, including extracellular matrix and collagen-based polymers. Bioprinting technologies, based on syringe deposition or laser technologies, are optimal tools for creating precise constructs precisely from the combination of collagen hydrogel and cells. This review describes the different stages of bioprinting, from the extraction of collagen hydrogels and bioink preparation, over the parameters of the printing itself, to the final testing of the constructs. This study mainly focuses on the use of physically crosslinked high-concentrated collagen hydrogels, which represents the optimal way to create a biocompatible 3D construct with sufficient stiffness. The cell viability in these gels is mainly influenced by the composition of the bioink and the parameters of the bioprinting process itself (temperature, pressure, cell density, etc.). In addition, a detailed table is included that lists the bioprinting parameters and composition of custom bioinks from current studies focusing on printing collagen gels without the addition of other polymers. Last but not least, our work also tries to refute the often-mentioned fact that highly concentrated collagen hydrogel is not suitable for 3D bioprinting and cell growth and development.

Photoinduced Porcine Gelatin Cross-Linking by Homobi- and Homotrifunctional Tetrazoles

Gelatin is a costless polypeptide material of natural origin, able to form hydrogels that are potentially useful in biomaterial scaffold design for drug delivery, cell cultures, and tissue engineering. However, gelatin hydrogels are unstable at physiological conditions, losing their features only after a few minutes at 37 °C. Accordingly, treatments to address this issue are of great interest. In the present work, we propose for the first time the use of bi- and trifunctional tetrazoles, most of them unknown to date, for photoinduced gelatin cross-linking towards the production of physiologically stable hydrogels. Indeed, after UV-B irradiation, aryl tetrazoles generate a nitrilimine intermediate that is reactive towards different functionalities, some of them constitutively present in the amino acid side chains of gelatin. The efficacy of the treatment strictly depends on the structure of the cross-linking agent used, and substantial improved stability was observed by switching from bifunctional to trifunctional cross-linkers.

Gelatin-Polyvinyl Alcohol Film for Tissue Engineering: A Concise Review

The field of biomaterials has been steadily expanding as a large number of pharmaceutical and manufacturing companies invest in research in order to commercialize biomaterial products. Various three-dimensional biomaterials have been explored including film, hydrogel, sponge, microspheres etc., depending on different applications. Thus, gelatin and polyvinyl alcohol (PVA) are widely used as a natural- and synthetic-based biomaterial, respectively, for tissue engineering and clinical settings. The combination of these materials has proven its synergistic effects in wound-healing applications. Therefore, this review aims to highlight the hybrid gelatin and PVA thin film development and evaluate its potential characteristics for tissue engineering applications from existing published evidence (within year 2010–2020). The primary key factor for polymers mixing technology might improve the quality and the efficacy of the intended polymers. This review provides a concise overview of the current knowledge for hybrid gelatin and PVA with the method of fabricating and mixing technology into thin films. Additionally, the findings guided to an optimal fabrication method and scrutinised characterisation parameters of fabricated gelatin-PVA thin film. In conclusion, hybrid gelatin-PVA thin film has higher potential as a treatment for various biomedical and clinical applications.

A systematic review of carbohydrate-based microneedles: current status and future prospects

Microneedles (MNs) are minimally invasive tridimensional biomedical devices that bypass the skin barrier resulting in systemic and localized pharmacological effects. Historically, biomaterials such as carbohydrates, due to their physicochemical properties, have been used widely to fabricate MNs. Owing to their broad spectrum of functional groups, carbohydrates permit designing and engineering with tunable properties and functionalities. This has led the carbohydrate-based microarrays possessing the great potential to take a futuristic step in detecting, drug delivery, and retorting to biologicals. In this review, the crucial and extensive summary of carbohydrates such as hyaluronic acid, chitin, chitosan, chondroitin sulfate, cellulose, and starch has been discussed systematically, using PRISMA guidelines. It also discusses different approaches for drug delivery and the mechanical properties of biomaterial-based MNs, till date, progress has been achieved in clinical translation of carbohydrate-based MNs, and regulatory requirements for their commercialization. In conclusion, it describes a brief perspective on the future prospects of carbohydrate-based MNs referred to as the new class of topical drug delivery systems.

Formulation and Antibacterial Activity Evaluation of Quaternized Aminochitosan Membrane for Wound Dressing Applications

Much attention has been paid to chitosan biopolymer for advanced wound dressing owing to its exceptional biological characteristics comprising biodegradability, biocompatibility and respectable antibacterial activity. This study intended to develop a new antibacterial membrane based on quaternized aminochitosan (QAMCS) derivative. Herein, aminochitosan (AMCS) derivative was quaternized by N-(2-Chloroethyl) dimethylamine hydrochloride with different ratios. The pre-fabricated membranes were characterized by several analysis tools. The results indicate that maximum surface potential of +42.2 mV was attained by QAMCS3 membrane compared with +33.6 mV for native AMCS membrane. Moreover, membranes displayed higher surface roughness (1.27 ± 0.24 μm) and higher water uptake value (237 ± 8%) for QAMCS3 compared with 0.81 ± 0.08 μm and 165 ± 6% for neat AMCS membranes. Furthermore, the antibacterial activities were evaluated against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Bacillus cereus. Superior antibacterial activities with maximum inhibition values of 80–98% were accomplished by QAMCS3 membranes compared with 57–72% for AMCS membrane. Minimum inhibition concentration (MIC) results denote that the antibacterial activities were significantly boosted with increasing of polymeric sample concentration from 25 to 250 µg/mL. Additionally, all membranes unveiled better biocompatibility and respectable biodegradability, suggesting their possible application for advanced wound dressing.

Onlay-graft of 3D printed Kagome-structure PCL scaffold incorporated with rhBMP-2 based on hyaluronic acid hydrogel

The onlay-graft, one of the most difficult graft conditions, is used for diverse clinical conditions, including plastic and dental surgery. The graft should withstand continuous pressure from overlying tissues and have excellent bone formation capability in a limited bone contact situation. We recently developed a 3D printed Kagome-structured polycaprolactone (PCL) scaffold that has a stronger mechanical property. This study evaluated the clinical feasibility of this scaffold for onlay-graft use. The value of the scaffold containing recombinant human bone morphogenetic protein-2 in a hyaluronate-based hydrogel (rhBMP-2/HA) to enhance bone regeneration was also assessed. 3D-printed Kagome-PCL scaffolds alone (n= 12, group I) or loaded with rhBMP-2/HA (n= 12, group II) were grafted using a rat calvarial onlay-graft model. Following sacrifice at 2, 4, and 8 weeks, all 3D-printed Kagome-PCL scaffolds were accurately positioned and firmly integrated to the recipient bone. Micro-computed tomography and histology analyses revealed a constant height of the scaffolds over time in all animals. New bone grew into the scaffolds in both groups, but with greater volume in group II. These results suggest the promising clinical feasibility of the 3D-printed Kagome-PCL scaffold for onlay-graft use and it could substitute the conventional onlay-graft in the plastic and dental reconstructive surgery in the near future.

Comprehensive collagen crosslinking comparison of microfluidic wet-extruded microfibers for bioactive surgical suture development

Collagen microfiber-based constructs have garnered considerable attention for ligament, tendon, and other soft tissue repairs, yet with limited clinical translation due to strength, biocompatibility, scalable manufacturing, and other challenges. Crosslinking collagen fibers improves mechanical properties; however, questions remain regarding optimal crosslinking chemistries, biocompatibility, biodegradation, long-term stability, and potential for biotextile assemble at scale, limiting their clinical usefulness. Here, we assessed over 50 different crosslinking chemistries on microfluidic wet-extruded collagen microfibers made with clinically relevant collagen to optimize collagen fibers as a biotextile yarn for suture or other medical device manufacture. The endogenous collagen crosslinker, glyoxal, provides extraordinary fiber ultimate tensile strength near 300MPa, and Young's modulus of over 3GPa while retaining 50% of the initial load-bearing capacity through 6 months as hydrated. Glyoxal crosslinked collagen fibers further proved cytocompatible and biocompatible per ISO 10993-based testing, and further elicits a predominantly M2 macrophage response. Remarkably these strong collagen fibers are amenable to industrial braiding to form strong collagen fiber sutures. Collagen microfluidic wet extrusion with glyoxal crosslinking thus progress bioengineered, strong, and stable collagen microfibers significantly towards clinical use for potentially promoting efficient healing compared to existing suture materials. STATEMENT OF SIGNIFICANCE: Towards improving clinical outcomes for over 1 million ligament and tendon surgeries performed annually, we report an advanced microfluidic extrusion process for type I collagen microfiber manufacturing for biological suture and other biotextile manufacturing. This manuscript reports the most extensive wet-extruded collagen fiber crosslinking compendium published to date, providing a tremendous recourse to the field. Collagen fibers made with clinical-grade collagen and crosslinked with glyoxal, exhibit tensile strength and stability that surpasses all prior reports. This is the first report demonstrating that glyoxal, a native tissue crosslinker, has the extraordinary ability to produce strong, cytocompatible, and biocompatible collagen microfibers. These collagen microfibers are ideal for advanced research and clinical use as surgical suture or other tissue-engineered medical products for sports medicine, orthopedics, and other surgical indications.

Properties and Applications of Nanoparticles from Plant Proteins

Nanoparticles from plant proteins are preferred over carbohydrates and synthetic polymeric-based materials for food, medical and other applications. In addition to their large availability and relatively low cost, plant proteins offer higher possibilities for surface modifications and functionalizing various biomolecules for specific applications. Plant proteins also avoid the immunogenic responses associated with the use of animal proteins. However, the sources of plant proteins are very diverse, and proteins from each source have distinct structures, properties and processing requirements. While proteins from corn (zein) and wheat (gliadin) are soluble in aqueous ethanol, most other plant proteins are insoluble in aqueous conditions. Apart from zein and gliadin nanoparticles (which are relatively easy to prepare), soy proteins, wheat glutenin and proteins from several legumes have been made into nanoparticles. The extraction of soluble proteins, hydrolyzing with alkali and acids, conjugation with other biopolymers, and newer techniques such as microfluidization and electrospraying have been adopted to develop plant protein nanoparticles. Solid, hollow, and core-shell nanoparticles with varying sizes and physical and chemical properties have been developed. Most plant protein nanoparticles have been used as carriers for drugs and as biomolecules for controlled release applications and for stabilizing food emulsions. This review provides an overview of the approaches used to prepare nanoparticles from plant proteins, and their properties and potential applications. The review's specific focus is on the preparation methods and applications, rather than the properties of the proteins, which have been reported in detail in other publications.

Inducing Immunomodulatory Effects on Human Macrophages by Multifunctional NCO-sP(EO-stat-PO)/Gelatin Hydrogel Nanofibers

Endowing materials and scaffolds with immunomodulatory properties has evolved into a very active field of research. However, combining such effects with multifunctionality regarding cell adhesion and manipulation is still challenging due to the intricate nature of cell-substrate interactions that require fine-tuning of scaffold properties. Here, we reported electrospinning of a well-known biopolymer, gelatin, together with six-arm star-shaped poly(ethylene oxide-stat-propylene oxide) prepolymer with isocyanate end groups (NCO-sP(EO-stat-PO)) as a reactive prepolymer cross-linker. Covalent coupling of two components during and after processing yielded a network of hydrogel fibers that was remarkably stable under aqueous and also proteolytic conditions without the need for extra cross-linking, with a significant increase in stability with increasing NCO-sP(EO-stat-PO) content. When seeded with human macrophages, cells adhered and spread on the fibers and were found highly viable after 7 days of culture across all scaffolds. Furthermore, hybrid fibrous meshes upregulated the expression of a prohealing gene, CD206, while downregulating proinflammatory genes, IL-1β and IL-8. Markedly, NCO-sP(EO-stat-PO)-rich samples induced a significantly reduced release of proinflammatory cytokines, IL-1β, IL-6, and IL-8. Finally, we successfully conjugated IL-4 to NCO-sP(EO-stat-PO) that effectively steered macrophages into a prohealing M2 type, demonstrating additional and robust control over the immunomodulatory feature of the scaffolds.