Oxygen Vacancy-Induced Nonradical Degradation of Organics: Critical Trigger of Oxygen (O2) in the Fe-Co LDH/Peroxymonosulfate System

Efficient activation of peracetic acid by mixed sludge derived biochar: Critical role of persistent free radicals

Peracetic acid (PAA)-based advanced oxidation processes (AOPs) were increasingly identified as the alternative scheme in wastewater treatment. Cost-effective and easily available catalyst for activation of PAA was in urgent demand for promoting engineering application process. In this study, a new type of biochar catalyst derived from pyrolysis of mixture of primary sludge (PSD) and secondary sludge (SSD) was prepared and showed effective PAA activation ability. The degradation of p-chlorophenol (4-CP) improved with PAA activation by mixed sludge derived biochar (PS-SDBC) than secondary sludge derived biochar (S-SDBC) and primary sludge derived biochar (P-SDBC), and the highest removal efficiency achieved by PS-SDBC with the PSD/SSD ratio of 5/5 (k_obs=0.057 1/(M·min), pH 9). Correlation analysis firstly indicated that persistent free radicals (PFRs) rather than chemical composition and material structure dominated PAA activation and organic radicals (RO•) was proved to be the major reactive species through electron paramagnetic resonance (EPR) detection. The mixture of PSD and SSD caused the synergy of inorganic metals and organic matters through pyrolysis processes, resulting in larger specific surface area (SSA) (110.71 m²/g), more abundant electron-donating groups (e.g., C = O, -OH) and massive defects (I_D/I_G = 1.519) of PS-SDBC than P-SDBC and S-SDBC, which eventually promoted PFRs formation. A fascinating phenomenon was observed in PS-SDBC/PAA system that the active sites of PFRs could be regenerated by RO• attacking onto PS-SDBC, which contributed to the wide pH applicability and continuous stability of PS-SDBC/PAA system in practical wastewater treatment. This study not only significantly deepened the understanding of the reaction mechanism between PAA and biochar, but also provided a potential PAA-based AOPs for micropollutants removal in wastewater.

Peroxydisulfate activation by sulfur-doped ordered mesoporous carbon: Insight into the intrinsic relationship between defects and 1O2 generation

The carbon-catalyzed persulfate-based advanced oxidation process (PS-AOP) has recently received much focus owing to the green, economical, and sustainable nature of carbon catalysts. In this study, sulfur-doped ordered mesoporous carbons (S-OMCs) were utilized to activate peroxydisulfate (PDS) for ciprofloxacin (CIP) removal. A synthesis temperature gradient was set to regulate the defect level of S-OMCs, since the thermal decomposition of oxygen- and sulfur-containing groups at different temperatures could release S and O and then create defects. In all S-OMCs/PDS systems, ¹O₂ dominated CIP degradation. Interestingly, a high linear correlation (R² = 0.9091) between defect level and ¹O₂ yield was found, confirming the structure-activity relationship between defects and ¹O₂ generation. Moreover, the impacts of several important reaction conditions and water matrix on S-OMC-1000/PDS activation system were surveyed. In the S-OMC-1000/PDS activation system, CIP removal could attain 85.84% under the condition of unadjusted pH (pH = 5.3) and small amount of S-OMC-1000 (50 mg/L). The S-OMC-1000/PDS activation system also exhibited relatively stable or even better performance in the presence of common inorganic anions and natural organic matter (NOM), manifesting its good potential for practical applications. In addition, the reusability of S-OMC-1000 was investigated. This study provides a practical and high-efficiency way for decontaminating antibiotic-polluted water, and gives an alternative approach for identifying the active site of catalysts.

Highly dispersed Ag and g-C3N4 quantum dots co-decorated 3D hierarchical Fe3O4 hollow microspheres for solar-light-driven pharmaceutical pollutants degradation in natural water matrix

The efficient removal of pharmaceutical pollutants presents a great challenge for the conventional sewage treatment system. Herein, we document the nanosheets assembled 3D hierarchical Fe₃O₄ hollow microspheres co-modified by Ag and g-C₃N₄ quantum dots (Ag/CNQDs@Fe₃O₄) for efficient degradation of two classic anticancer drugs, i.e., capecitabine (CAP) and 5-fluorouracil (5-FLU) under visible light in 1 h. Benefiting from the unique hierarchically hollow structure, the intrinsic strengths of each component and their interactions, synergistic reinforcing mechanism is constructed, furnishing more accessible reactive places, promoting the diffusion of pollutants/oxidants, improving charge separation ability, and raising light utilization rate. Consequently, Ag/CNQDs@Fe₃O₄ can not only show superior photocatalytic properties, but also greatly boost PMS activation to yield sufficient oxidative radicals. More notably, the studied system also features excellent stability and strong tolerance to real water samples, and maintains appreciable performance even under natural sunlight illumination. The predominant active species, possible ADs decomposition pathways, and underlying reaction mechanism for the Ag/CNQDs@Fe₃O₄/PMS/vis system are thoroughly explored. This work presents significant advancement in enabling an integrated technology of PMS and photocatalysis to realize its great potential in environment restoration.

Origin of the Excellent Activity and Selectivity of a Single-Atom Copper Catalyst with Unsaturated Cu-N2 Sites via Peroxydisulfate Activation: Cu(III) as a Dominant Oxidizing Species

As an efficient active oxidant for the selective degradation of pollutants in wastewater, the high-valent copper species Cu(III) with persulfate activation has attracted substantial attention in some Cu-based catalysts. However, the systematic study of a catalyst structure and mechanism about Cu(III) with peroxydisulfate (PDS) activation is challenging owing to the coexistence of multiple Cu species and the structural symmetry of PDS. Herein, we anchored a Cu atom with two pyridinic N atoms to synthesize a single-atom Cu catalyst (Cu_SA-NC). Experimental characterizations and theoretical calculations complemented each other well because of the uniform atomic active sites. The single-atom Cu was identified as the active site, and the unsaturated Cu-N₂ configuration was more conductive to PDS activation than the saturated Cu-N₄ configuration. Benefiting from the generation of Cu(III), Cu_SA-NC exhibited an obvious selective and anti-interference performance for pollutant degradation in a complex matrix. The superior catalytic activity of Cu_SA-NC compared with that of other reported Cu-based catalysts and good durability in a continuous-flow experiment further revealed the potential of Cu_SA-NC for practical applications. This work strongly deepens the understanding of the generation of Cu(III) in a single-atom Cu catalyst with unsaturated Cu-N₂ sites under PDS activation and develops an efficient approach for actual water purification.

Ultrahigh Peroxymonosulfate Utilization Efficiency over CuO Nanosheets via Heterogeneous Cu(III) Formation and Preferential Electron Transfer during Degradation of Phenols

In persulfate activation by copper-based catalysts, high-valent copper (Cu(III)) is an overlooked reactive intermediate that contributes to efficient persulfate utilization and organic pollutant removal. However, the mechanisms underlying heterogeneous activation and enhanced persulfate utilization are not fully understood. Here, copper oxide (CuO) nanosheets (synthesized with a facile precipitation method) exhibited high catalytic activity for peroxymonosulfate (PMS) activation with 100% 4-chlorophenol (4-CP) degradation within 3 min. Evidence for the critical role of surface-associated Cu(III) on PMS activation and 4-CP degradation over a wide pH range (pH 3-10) was obtained using in situ Raman spectroscopy, electron paramagnetic resonance, and quenching tests. Cu(III) directly oxidized 4-CP and other phenolic pollutants, with rate constants inversely proportional to their ionization potentials. Cu(III) preferentially oxidizes 4-CP rather than react with two PMS molecules to generate one molecule of ¹O₂, thus minimizing this less efficient PMS utilization pathway. Accordingly, a much higher PMS utilization efficiency (77% of electrons accepted by PMS ascribed to 4-CP mineralization) was obtained with CuO/PMS than with a radical pathway-dominated Co₃O₄/PMS system (27%) or with the ¹O₂ pathway-dominated α-MnO₂/PMS system (26%). Overall, these results highlight the potential benefits of PMS activation via heterogeneous high-valent copper oxidation and offer mechanistic insight into ultrahigh PMS utilization efficiency for organic pollutant removal.

Sulfur vacancies on MoS2 enhanced the activation of peroxymonosulfate through the co-existence of radical and non-radical pathways to degrade organic pollutants in wastewater

The enhancement of vacancies in catalysts involving Fenton-like reactions is a promising way to remove organic pollutants in wastewater, but sulfur vacancies are rarely involved. In this work, MoS₂ containing defect sites were synthesized by a simple high-temperature treatment and then applied for activating peroxymonosulfate to eliminate organic pollutants in wastewater. The structure was characterized by several techniques such as XRD, BET, and XPS. Important influencing factors were systemically investigated. The results indicated that MoS₂ with sulfur vacancies possessed a higher catalytic activity than that of the parent MoS₂. The annealing temperature of the catalyst had a great effect on the removal of organic pollutants. Besides, the catalytic system had a wide pH range. Quenching and electron paramagnetic resonance (EPR) experiments indicated that the reaction system contained radical and non-radical species. The characterization results revealed that the defect sites in catalysts mainly strengthened the activity of catalysts. This study offers a new heterogeneous catalyst for the removal of organic pollutants via the peroxymonosulfate-based Fenton-like reactions.

Sulfur vacancies on MoS2 enhanced the activation of peroxymonosulfate to remove organic pollutants in wastewater.