Spherical colloidal photonic crystals

A dual responsive photonic liquid for independent modulation of color brightness and hue

Responsive chromic materials are highly desirable in the fields of displays, anti-counterfeiting, and camouflage, but their advanced applications are usually limited by the unrealized delicate and independent tunability of their three intrinsic attributes of color. This work achieves the separate, continuous, and reversible modulation of structural color brightness and hue with an aqueous suspension of dual-responsive Fe₃O₄@polyvinylpyrrolidone (PVP)@poly(N-isopropyl acrylamide) (PNIPAM) flexible photonic nanochains. The underlying modulation mechanism of color brightness was experimentally and numerically deciphered by analyzing the morphological responses to stimuli. When an increasing magnetic field was applied, the random worm-like flexible photonic nanochains gradually orientated along the field direction, due to the dominant magnetic dipole interaction over the thermal motion, lengthening the orientation segment length up to the whole of the nanochains. Consequently, the suspension displays increased color brightness (characterized by diffraction intensity). Meanwhile, the color hue (characterized by diffraction frequency) could be controlled by temperature, due to the volume changes of the interparticle PNIPAM. The achieved diverse color modulation advances the next-generation responsive chromic materials and enriches the basic understanding of the color tuning mechanisms. With versatile and facile color tunability and shape patterning, the developed responsive chromic liquid promises to have attractive potential in full-color displays and in adaptive camouflages.

Dual-Encryption in a Shape-Memory Hydrogel with Tunable Fluorescence and Reconfigurable Architecture

Materials capable of shape-morphing and/or fluorescence imaging have practical significances in the fields of anti-counterfeiting, information display, and information protection. However, it's challenging to realize these functions in hydrogels due to the poor mechanical properties and lack of tunable fluorescence. A tough hydrogel with good shape-memory ability and phototunable fluorescence is reported here, which affords reprogrammable shape designing and information encoding for dual-encryption. This hydrogel is prepared by incorporating donor-acceptor chromophore units into a poly(1-vinylimidazole-co-methacrylic acid) network, in which the dense intra- and interchain hydrogen bonds lead to desirable features including high stiffness, high toughness, and temperature-mediated shape-memory property. Additionally, the hydrogel shows photomediated tunable fluorescence through a unimer-to-dimer transformation of the chromophores. By combining photolithography and origami/kirigami designs, hydrogel sheets encoded with fluorescent patterns can deform into specific 3D configurations. The geometrically encrypted fluorescent information in the architected hydrogels is readable only after sequential shape recovery and UV light irradiation. As demonstrated by proof-of-concept experiments, both the fluorescent pattern and the 3D configuration are reprogrammable, facilitating repeated information protection and display. The design of tough hydrogels with rewritable fluorescent patterns and reconfigurable shapes should guide the future development of smart materials with improved security and wider applications in aqueous environments.

Bottom-Up Assembled Photonic Crystals for Structure-Enabled Label-Free Sensing

Photonic crystals (PhCs) display photonic stop bands (PSBs) and at the edges of these PSBs transport light with reduced velocity, enabling the PhCs to confine and manipulate incident light with enhanced light-matter interaction. Intense research has been devoted to leveraging the optical properties of PhCs for the development of optical sensors for bioassays, diagnosis, and environmental monitoring. These applications have furthermore benefited from the inherently large surface area of PhCs, giving rise to high analyte adsorption and the wide range of options for structural variations of the PhCs leading to enhanced light-matter interaction. Here, we focus on bottom-up assembled PhCs and review the significant advances that have been made in their use as label-free sensors. We describe their potential for point-of-care devices and in the review include their structural design, constituent materials, fabrication strategy, and sensing working principles. We thereby classify them according to five sensing principles: sensing of refractive index variations, sensing by lattice spacing variations, enhanced fluorescence spectroscopy, surface-enhanced Raman spectroscopy, and configuration transitions.

Rapid Responsive Mechanochromic Photonic Pigments with Alternating Glassy-Rubbery Concentric Lamellar Nanostructures

Photonic pigment particles prepared via self-assembly have been suffering from their poor mechanical performances; i.e., they can easily be damaged and lose structural color under a compression force. This greatly limits their uses as mechanochromic pigments. Here, a nanoscale concentric lamellar structure of alternating glassy-rubbery microdomains is successfully created within photonic microparticles through a confined self-assembly and photo-cross-linking strategy. The glassy domain is composed of polystyrene, and cross-linked bottlebrush polydimethylsiloxane served as the supersoft elastic domain. The obtained photonic structure not only shows large deformation and visible color changes under a loaded compression force but also rapidly recovers to its original state in less than 1 s (∼0.16 s) upon unloading. Continuously loading-unloading micro compression test indicates that no obvious damage can be identified after 250 cycles, indicating the high durability of the pigments against deformation. These pigments with different reflected colors are simply obtained using bottlebrush block copolymer formulations with tunable weight percentages of polymer additives. The mechanical robust photonic pigments may be useful in many important applications.

From colloidal particles to photonic crystals: advances in self-assembly and their emerging applications

Over the last three decades, photonic crystals (PhCs) have attracted intense interests thanks to their broad potential applications in optics and photonics. Generally, these structures can be fabricated via either "top-down" lithographic or "bottom-up" self-assembly approaches. The self-assembly approaches have attracted particular attention due to their low cost, simple fabrication processes, relative convenience of scaling up, and the ease of creating complex structures with nanometer precision. The self-assembled colloidal crystals (CCs), which are good candidates for PhCs, have offered unprecedented opportunities for photonics, optics, optoelectronics, sensing, energy harvesting, environmental remediation, pigments, and many other applications. The creation of high-quality CCs and their mass fabrication over large areas are the critical limiting factors for real-world applications. This paper reviews the state-of-the-art techniques in the self-assembly of colloidal particles for the fabrication of large-area high-quality CCs and CCs with unique symmetries. The first part of this review summarizes the types of defects commonly encountered in the fabrication process and their effects on the optical properties of the resultant CCs. Next, the mechanisms of the formation of cracks/defects are discussed, and a range of versatile fabrication methods to create large-area crack/defect-free two-dimensional and three-dimensional CCs are described. Meanwhile, we also shed light on both the advantages and limitations of these advanced approaches developed to fabricate high-quality CCs. The self-assembly routes and achievements in the fabrication of CCs with the ability to open a complete photonic bandgap, such as cubic diamond and pyrochlore structure CCs, are discussed as well. Then emerging applications of large-area high-quality CCs and unique photonic structures enabled by the advanced self-assembly methods are illustrated. At the end of this review, we outlook the future approaches in the fabrication of perfect CCs and highlight their novel real-world applications.

Unexpected Dependence of Photonic Band Gap Size on Randomness in Self-Assembled Colloidal Crystals

Using computer simulations, we explore how thermal noise-induced randomness in a self-assembled photonic crystal affects its photonic band gaps (PBGs). We consider a two-dimensional photonic crystal composed of a self-assembled array of parallel dielectric hard rods of infinite length with circular or square cross section. We find that PBGs can exist over a large range of intermediate packing densities and the largest band gap does not always appear at the highest packing density studied. Remarkably, for rods with square cross section at intermediate packing densities, the transverse magnetic (TM) band gap of the self-assembled (i.e., thermal) system can be larger than that of identical rods arranged in a perfect square lattice. By considering hollow rods, we find the band gap of transverse electric modes can be substantially increased while that of TM modes show no obvious improvement over solid rods. Our study suggests that particle shape and internal structure can be used to engineer the PBG of a self-assembled system despite the positional and orientational randomness arising from thermal noise.

Outside-in catalytic graphitization method for synthesis of dispersible and uniform graphitic porous carbon nanospheres

Common strategies to synthesize graphitic porous carbon nanospheres suffer from energy consumption, exorbitant cost and harsh condition, and lead to closed pore and polydisperse particles. The successful manipulation of adjustable graphitic skeleton, developed porosity, good monodispersity and dispersity of carbon nanospheres is essential to meet their structural varieties and practical applications. Herein, an outside-in catalytic graphitization method is reported to synthesize carbon nanospheres with abovementioned properties, which involves interfacial assembly between layered double hydroxides nanosheets and polymer nanospheres, in-situ generation of nickel nanoparticles, and outside-in catalytic graphitization. The unusual phenomenon is that the in-situ generated nickel nanoparticles are preferentially oriented to the carbon side rather than to the free open space. The interface reactions between nickel nanoparticles and amorphous carbons drive continuous etching of carbon species to form graphitic structure in the interior of spheres. The graphitic structure can be tuned by changing effective charge ratio and pyrolysis conditions and obtained carbon nanospheres possessed good dispersibility in water and ethanol. Moreover, such carbon nanospheres exhibited good performance when used as anodes in lithium-ion batteries. These findings may pave new ways for synthesizing multifarious carbon nanomaterials with adjustable graphitic skeleton, developed porosity, good monodispersity and dispersibility for various applications.

Dynamic Colloidal Photonic Crystal Hydrogels with Self-Recovery and Injectability

Simulation of self-recovery and diversity of natural photonic crystal (PC) structures remain great challenges for artificial PC materials. Motivated by the dynamic characteristics of PC nanostructures, here, we present a new strategy for the design of hydrogel-based artificial PC materials with reversible interactions in the periodic nanostructures. The dynamic PC hydrogels, derived from self-assembled microgel colloidal crystals, were tactfully constructed by reversible crosslinking of adjacent microgels in the ordered structure via phenylboronate covalent chemistry. As proof of concept, three types of dynamic colloidal PC hydrogels with different structural colors were prepared. All the hydrogels showed perfect self-healing ability against physical damage. Moreover, dynamic crosslinking within the microgel crystals enabled shear-thinning injection of the PC hydrogels through a syringe (indicating injectability or printability), followed by rapid recovery of the structural colors. In short, in addition to the great significance in biomimicry of self-healing function of natural PC materials, our work provides a facile strategy for the construction of diversified artificial PC materials for different applications such as chem-/biosensing, counterfeit prevention, optical display, and energy conversion.

Self-Assembled Photonic Microsensors with Strong Aggregation-Induced Emission for Ultra-Trace Quantitative Detection

Ultratrace quantitative detection based on fluorescence is highly desirable for many important applications such as environmental monitoring or disease diagnosis, which however has remained a great challenge because of limited and irregular fluorescence responses to analytes at ultralow concentrations. Herein the problem is circumvented via local enrichment and detection of analytes within a microsensor, that is, photonic porous microspheres grafted with aggregation-induced emission gens (AIEgens). The obtained microspheres exhibit dual structural and molecular functions, namely, bright structural colors and strong fluorescence. Large fluorescence quenching induced by nitrophenol compounds in an aqueous environment is observed at ultralow concentrations (10^-12-10^-8 mol/L), enabling quantitative detection at a ppb level (ng/L). This is achieved within a porous structure with good connectivity between the nanopores to improve analyte diffusion, an internal layer of poly(ethylene oxide) (PEO) for analyte enrichment via hydrogen bonding, and homogeneous distribution of AIEgens within the PEO layer for enhanced fluorescence quenching. The fluorescent porous microspheres can be readily obtained in a single step templated by well-ordered water-in-oil-in-water double emulsion droplets with AIE amphiphilic bottlebrush block copolymers as the effective stabilizer.

Designable structural coloration by colloidal particle assembly: from nature to artificial manufacturing

Structural color attracts considerable scientific interests and industrial explorations in various fields for the eco-friendly, fade-resistant, and dynamic advantages. After the long-period evolution, nature has achieved the optimized color structures at various length scales, which has inspired people to learn and replicate them to improve the artificial structure color. In this review, we focus on the design of artificial structural colors based on colloidal particle assembly and summarize the functional bioinspired structure colors. We demonstrate the design principles of biomimetic structural colors via the precise structure engineering and typical bottom-up methods. Some main applications are outlined in the following chapter. Finally, we propose the existing challenges and promising prospects. This review is expected to introduce the recent design strategies about the artificial structure colors and provide the insights for its future development.

Facile fabrication of self-reporting micellar and vesicular structures based on an etching-ion exchange strategy of photonic composite spheres of poly(ionic liquid)

Micellar and vesicular structures capable of sensing and reporting the chemical environment as well as facilely introducing user-defined functions make a vital contribution to constructing versatile compartmentalized systems. Herein, by combining poly(ionic liquid)-based photonic spheres and an etching-ion exchange strategy we fabricate micellar and vesicular photonic compartments that can not only mimic the structure and function of conventional micelles and vesicles, but also sense and report the chemical environment as well as introducing user-defined functions. Photonic composite spheres composed of a SiO2 template and poly(ionic liquid) are employed to selectively etch outer-shell SiO2 followed by ion exchange and removal of the residual SiO2 to afford micellar photonic compartments (MPCs). The MPCs can selectively absorb solvents from the oil/water mixtures together with sensing and reporting the adsorbed solvents by the self-reporting optical signal associated with the uniform porous structure of photonic spheres. Vesicular photonic compartments (VPCs) are fabricated via selective infiltration and polymerization of ionic liquids followed by etching of the SiO2 template. Subsequent ion exchange introduces desirable functions to the VPCs. Furthermore, we demonstrate that the thickness and the anisotropic functions of VPCs can be facilely modulated. Overall, we anticipate that the micellar and vesicular photonic compartments with self-reporting optical signals and user-defined functions could serve as novel platforms towards multifunctional compartmentalized systems.

Controlling the Large-Scale Fabrication of Supraparticles

Controlling the nanoscale interactions of colloidal building blocks is a key step for the transition from single nanoparticles to tailor-made, architected morphologies and their further integration into functional materials. Solvent evaporation-induced self-assembly within emulsion droplets emerges as a fast, versatile, and low-cost approach to obtain spherical, complex structures, such as supraparticles. Nevertheless, some process-structure relationships able to describe the effects of emulsion conditions on the synthesis outcomes still remain to be understood. Here, we explore the effect of different physicochemical parameters of emulsion-templated self-assembly (ETSA) on supraparticles' formation. Supraparticle size, size dispersity, microporosity, and sample homogeneity are rationalized based on the used surfactant formulation, stabilization mechanism, and viscosity of the emulsion. We further demonstrate the significance of the parameters found by optimizing a transferable, large-scale (gram-size) ETSA setup for the controlled synthesis of spherical supraparticles in a range of defined sizes (from 0.1-10 μm). Ultimately, our results provide new key synthetic parameters able to control the process, promoting the development of supraparticle-based, functional nanomaterials for a wide range of applications.

Stimuli-Responsive Structural Colored Gel That Exhibits the Three Primary Colors of Light by Using Multiple Photonic Band Gaps Acquired from Photonic Balls

A material that can capture changes in environmental stimuli as a color change can be used to develop sensors and displays. By producing an ordered structure in a polymer gel that reflects particular wavelengths of light, we can express the volume change that occurs based on the environment as the change in the wavelength of reflected light, i.e., structural color. To date, many systems have been developed to change the hue of the structural color as a function of temperature, pH, substance, applied force, and so on. However, as is expected from the principle of optical interference, the gel usually shows a red-shift with increasing volume. In this study, we propose a method for preparing structurally colored stimuli-responsive polymer gels that display appropriate color changes according to changes in environmental stimuli. For this purpose, we employ the photonic balls, which are spherical colloidal crystals consisting of monodisperse silica particles, as templates. By combining the wavelength-selective reflection generated from different photonic band gaps of the photonic balls, we succeeded in developing porous stimuli-responsive polymer gels that exhibited various types of color change, which are not observed in conventional systems.

Laminar Flow-Based Fiber Fabrication and Encoding via Two-Photon Lithography

In recent years, flow photolithography (FL) has emerged as a powerful synthetic tool for the creation of barcoded microparticles with complex morphologies and chemical compositions which have been shown to be useful in a range of multiplexed bioassay applications. More specifically, FL has been highly successful in producing micron-sized, encoded particles of bespoke shape, size, and color. That said, to date, FL has been restricted to generating barcoded microparticles and has lacked the ability to produce hybrid fibers which are structurally and spectrally encoded. To this end, we herein present a method that combines a continuous flow microfluidic system with two-photon polymerization (2PP) to fabricate microscale-encoded fibers and Janus strips in a high-throughput manner. Specifically, two co-flow liquid streams containing a monomer and initiator are introduced through a Y-shape channel to form a stable interface in the center of a microfluidic channel. The flow containing the (fluorescently labeled) monomer is then patterned by scanning the voxel of the 2PP laser across the interface to selectively polymerize different regions of the forming fiber/particle. Such a process allows for rapid spectral encoding at the single fiber level, with the resulting structurally coded fibers having obvious application in the fields of security identification and anticounterfeiting.

Hierarchically Molecular Imprinted Porous Particles for Biomimetic Kidney Cleaning

Blood purification by adsorption of excessive biomolecules is vital for maintaining human health. Here, inspired by kidney self-purification, which removes a number of biomolecules with different sizes simultaneously, hierarchical molecular-imprinted inverse opal particles integrated with a herringbone microfluidic chip for efficient biomolecules cleaning are presented. The particle possesses combinative porous structure with both surface and interior imprints for the specific recognition of small molecules and biomacromolecules. Additionally, the presence of the herringbone mixer largely improve the adsorption efficiency due to enhanced mixing. Moreover, the inverse opal framework of the particles give rise to optical sensing ability for self-reporting of the adsorption states. These features, together with its reusability, biosafety, and biocompatibility, make the platform highly promising for clinical blood purification and artificial kidney construction.

Photonic Janus Balls with Controlled Magnetic Moment and Density Asymmetry

Colloidal crystals show structural colors through wavelength-selective diffraction at photonic stopbands. Here, we design photonic Janus balls with a controlled magnetic moment for programmable structural color switching. The Janus balls are produced from microfluidically produced paired drops of two distinct photocurable resins. The lighter resin contains magnetic nanoparticles and carbon black, whereas heavier one contains silica particles at a high volume fraction. The paired drops spontaneously align vertically due to the density asymmetry. The magnetic moment is assigned in the vertically aligned drops by aligning magnetic nanoparticles with an external field and capturing them through photopolymerization. Silica particles in the heavier compartment spontaneously form crystalline arrays due to interparticle repulsion, developing structural colors. The resulting photonic Janus balls vertically align without an external field, like a roly-poly toy, so that carbon-black-laden compartments face upward. With an external magnetic field, the Janus balls align their magnetic moment to the field and display structural colors. Importantly, the direction of the magnetic moment is set by the direction of the external field during photopolymerization, which enables the simultaneous manipulation of orientations of distinct photonic Janus balls in a programmed manner. These photonic Janus balls are potentially useful as active color inks for anti-counterfeiting tags.

Inorganic Photonic Microspheres with Localized Concentric Ordering for Deep Pattern Encoding and Triple Sensory Microsensor

Photonic microspheres offer building units with unique topological structures and specific optical functions for diverse applications. Here, a new class of inorganic photonic microspheres with superior robustness, optical and electrical properties is reported by introducing a unique localized concentric ordering architecture and chemical interaction, which further serve as building blocks for deep pattern encoding and multiple sensory optoelectronic devices. Benefiting from localized concentric ordering architecture, the resultant photonic microspheres demonstrate orientation- and angle-independent structural colors. Notably, the formation of well-combined lamellae inorganic layers by chemical interaction grants the microspheres superior mechanical robustness, excellent solvent resistance, thermal stability, and multiple optoelectronic properties simultaneously, rarely seen in previous reports. Owing to these merits, such microspheres are used to construct diverse encoded photonic patterns for anti-counterfeiting applications. Interestingly, cross-communication among neighboring microspheres creates complex photonic sub-patterns, which provide "fingerprint information" with deep encryption security. Moreover, a single photonic microsphere-based optoelectronic microsensor is demonstrated for the first time, which achieves appealing application for real-time health monitoring and safety warning toward triple environmental stimuli. This work not only provides a new kind of robust, multifunctional photonic material, but also opens a new avenue for their uses as complexed pattern encoding and multi-parametric sensing platforms.

Angular-Independent Photonic Pigments via the Controlled Micellization of Amphiphilic Bottlebrush Block Copolymers

Photonic materials with angular-independent structural color are highly desirable because they offer the broad viewing angles required for application as colorants in paints, cosmetics, textiles, or displays. However, they are challenging to fabricate as they require isotropic nanoscale architectures with only short-range correlation. Here, porous microparticles with such a structure are produced in a single, scalable step from an amphiphilic bottlebrush block copolymer. This is achieved by exploiting a novel "controlled micellization" self-assembly mechanism within an emulsified toluene-in-water droplet. By restricting water permeation through the droplet interface, the size of the pores can be precisely addressed, resulting in structurally colored pigments. Furthermore, the reflected color can be tuned to reflect across the full visible spectrum using only a single polymer (M_n  = 290 kDa) by altering the initial emulsification conditions. Such "photonic pigments" have several key advantages over their crystalline analogues, as they provide isotropic structural coloration that suppresses iridescence and improves color purity without the need for either refractive index matching or the inclusion of a broadband absorber.

Applying droplets and films in evaporative lithography

This review covers experimental results of evaporative lithography and analyzes existing mathematical models of this method. Evaporating droplets and films are used in different fields, such as cooling of heated surfaces of electronic devices, diagnostics in health care, creation of transparent conductive coatings on flexible substrates, and surface patterning. A method called evaporative lithography emerged after the connection between the coffee ring effect taking place in drying colloidal droplets and naturally occurring inhomogeneous vapor flux densities from liquid-vapor interfaces was established. Essential control of the colloidal particle deposit patterns is achieved in this method by producing ambient conditions that induce a nonuniform evaporation profile from the colloidal liquid surface. Evaporative lithography is part of a wider field known as "evaporative-induced self-assembly" (EISA). EISA involves methods based on contact line processes, methods employing particle interaction effects, and evaporative lithography. As a rule, evaporative lithography is a flexible and single-stage process with such advantages as simplicity, low price, and the possibility of application to almost any substrate without pretreatment. Since there is no mechanical impact on the template in evaporative lithography, the template integrity is preserved in the process. The method is also useful for creating materials with localized functions, such as slipperiness and self-healing. For these reasons, evaporative lithography attracts increasing attention and has a number of noticeable achievements at present. We also analyze limitations of the approach and ways of its further development.

Responsive Photonic Liquid Marbles

Liquid marbles have potential to serve as mini-reactors for fabricating new materials, but this has been exploited little and mostly for conventional chemical reactions. Here, we uncover the unparalleled capability of liquid marbles to act as platforms for controlling the self-assembly of a bio-derived polymer, hydroxypropyl cellulose, into a cholesteric liquid crystalline phase showing structural coloration by Bragg reflection. By adjusting the cholesteric pitch via quantitative water extraction, we achieve liquid marbles that we can tailor for structural color anywhere in the visible range. Liquid marbles respond with color change that can be detected by eye, to changes in temperature, exposure to toxic chemicals and mechanical deformation. Our concept demonstrates the advantages of using liquid marbles as a miniature platform for controlling the liquid crystal self-assembly of bio-derived polymers, and their exploitation to fabricate sustainable, responsive soft photonic objects.

Colloidal assembly in droplets: structures and optical properties

Colloidal assembly in emulsion drops provides fundamental tools for studying optimum particle arrangement under spherical confinement and practical means for producing photonic microparticles. Recent progress has revealed that energetically favored cluster configurations are different from conventional supraballs, which could enhance optical performance. This paper reviews state-of-the-art emulsion-templated colloidal clusters, and particularly focuses on recently reported novel structures such as icosahedral, decahedral, and single-crystalline face-centered cubic (fcc) clusters. We classify the clusters according to the number of component particles as small (N < O(10²)), medium (O(10²) ≤N≤O(10⁴)), and large (N≥O(10⁵)). For each size of clusters, we discuss the detailed structures, mechanisms of cluster formation, and optical properties and potential applications. Finally, we outline current challenges and questions that require further investigation.

Self-limiting directional nanoparticle bonding governed by reaction stoichiometry

Nanoparticle clusters with molecular-like configurations are an emerging class of colloidal materials. Particles decorated with attractive surface patches acting as analogs of functional groups are used to assemble colloidal molecules (CMs); however, high-yield generation of patchy nanoparticles remains a challenge. We show that for nanoparticles capped with complementary reactive polymers, a stoichiometric reaction leads to reorganization of the uniform ligand shell and self-limiting nanoparticle bonding, whereas electrostatic repulsion between colloidal bonds governs CM symmetry. This mechanism enables high-yield CM generation and their programmable organization in hierarchical nanostructures. Our work bridges the gap between covalent bonding taking place at an atomic level and colloidal bonding occurring at the length scale two orders of magnitude larger and broadens the methods for nanomaterial fabrication.

Three-dimensional ordered macroporous magnetic photonic crystal microspheres for enrichment and detection of mycotoxins (I): Droplet-based microfluidic self-assembly synthesis

Ordered porous materials are attracting enormous attention due to their uniform pore structures, particularly the magnetic photonic crystal microspheres (PCMs) which not only possess unique photonic crystal structure but also can achieve separation easily based on magnet. Here, a two-phase microfluidic self-assembly synthetic system was established simply and employed for the preparation of three dimensional PCMs (3DPCMs) by using the emulsion droplet approach. One phase (dispersed phase) was an aqueous emulsion containing Fe₃O₄, silica (SiO₂) and polystyrene (PS) nanoparticles; another phase (continuous phase) was pure silicone oil. The droplets were formed by introducing the dispersed phase into the continuous phase through a tee valve. By heating the droplets, the water would evaporate and the nanoparticles would finally assemble into solid microspheres, which could be changed into macroporous 3DPCMs after removal of the PS nanoparticles by calcination. The contents and particle sizes of Fe₃O₄, SiO₂ and PS nanoparticles in the dispersed phase were investigated in detail and optimized to prepare macroporous magnetic 3DPCMs with high quality. The morphologies, surface crystal structure, magnetic property, particle size distribution, specific surface area and pore size of the macroporous magnetic 3DPCMs were characterized. The expected 3DPCM displayed regular and uniform photonic crystal structure, narrow particle size distribution and strong magnetic property. The macroporous magnetic 3DPCMs grafted with vomitoxin (DON)-antibodies could be applied for selective enrichment of DON in real samples.

Tunable Photonic Microspheres of Comb-Like Supramolecules

Photonic crystals (PCs) are ideal candidates for reflective color pigments with high color purity and brightness due to tunable optical stop band. Herein, the generation of PC microspheres through 3D confined supramolecular assembly of block copolymers (polystyrene-block-poly(2-vinylpyridine), PS-b-P2VP) and small molecules (3-n-pentadecylphenol, PDP) in emulsion droplets is demonstrated. The intrinsic structural colors of the PC microspheres are effectively regulated by tuning hydrogen-bonding interaction between P2VP blocks and PDP, where reflected color can be readily tuned across the whole visible spectrum range. Also, the effects of both PDP and homopolymer (hPS) on periodic structure and optical properties of the microspheres are investigated. Moreover, the spectral results of finite element method (FEM) simulation agree well with the variation of structural colors by tuning the periodicity in PC microspheres. The supramolecular microspheres with tunable intrinsic structural color can be potentially useful in the various practical applications including display, anti-counterfeit printing and painting.

Optical Characterization of the Photonic Ball as a Structurally Colored Pigment

A photonic ball is a spherical colloidal crystal. Because it can exhibit vivid structural colors, many attempts have been made to apply it as a structurally colored pigment. However, the optical properties of the photonic ball are complicated because different crystal planes can be involved in the coloration mechanism, depending on the size of the constituent colloidal particles. In this paper, we report a comparative study of photonic balls consisting of silica particles with sizes ranging from 220 to 500 nm. We first analyze the reflectance spectra acquired in a nearly backscattering geometry and confirm that Bragg diffraction from different crystal planes causes several spectral peaks. Second, the angular dependence of reflection is experimentally characterized and theoretically analyzed with appropriate models. These analyses and a comparison with a planar colloidal crystal reveal that the spherical shape plays an essential role in the minor iridescence of photonic balls. We finally discuss a method to enhance color saturation by incorporating small light-absorbing particles. We also discuss the iridescence of the photonic ball under directional and ambient illumination conditions.

Reconfigurable Surface with Photodefinable Physicochemical Properties for User-Designable Cell Scaffolds

Surfaces with specific topography and chemical composition are quite useful in many applications ranging from functional interfaces to cell incubation scaffolds. Although these surfaces can be easily fabricated by combining topography-construction methods and surface-functionalization strategies, their properties are often static after fabrication or merely switchable between "on" and "off" states. Developing surfaces that can be on-demand regulated are quite important for the generation of smart surfaces for future applications. In this paper, we present a reconfigurable surface with adjustable topography and chemical functionality utilizing the photodynamic feature of the disulfide bond. Structured surfaces, composed of disulfide-cross-linked polymer networks, were prepared by using disulfide-containing methacrylate as the monomer. We show that the topography and chemical functionality of the surface can be on-demand regulated after its fabrication, with 254 and 365 nm UV light, respectively, allowing to "define" the physicochemical properties of the surface using light before the usage. We also demonstrate the application of such surface as a user-designable cell scaffold, that different cell scaffolds can be generated from one original surface with a simple exposure process, to define the desired bioactivity onto every point of the surface and therefore exactly control cell behaviors on the scaffold.

Progress of electrospray and electrospinning in energy applications

In the promotion of energy strategies to address the global energy crisis, nanotechnology has been successfully used to generate novel energy materials with excellent characteristics, such as high specific surface area, good flexibility and large porosity. Among the various methods for fabricating nanoscale materials, electrospray and electrospinning technologies have unlocked low-cost, facile and industrial routes to nanotechnology over the past ten years. This review highlights research into the key parts and primary theory of these techniques and their application in preparing energy-related materials and devices: especially fuel cells, solar cells, lithium ion batteries, supercapacitors as well as hydrogen storage systems. The challenges and future prospects of the manufacturing technologies are also covered in this paper.

Micro-/Nanostructured Interface for Liquid Manipulation and Its Applications

Understanding the relationship between liquid manipulation and micro-/nanostructured interfaces has gained much attention due to the wide potential applications in many fields, such as chemical and biomedical assays, environmental protection, industry, and even daily life. Much work has been done to construct various materials with interfacial liquid manipulation abilities, leading to a range of interesting applications. Herein, different fabrication methods from the top-down approach to the bottom-up approach and subsequent surface modifications of micro-/nanostructured interfaces are first introduced. Then, interactions between the surface and liquid, including liquid wetting, liquid transportation, and a number of corresponding models, together with the definition of hydrophilic/hydrophobic, oleophilic/olephobic, the definition and mechanism of superwetting, including superhydrophobicity, superhydrophilicity, and superoleophobicity, are presented. The micro-/nanostructured interface, with major applications in self-cleaning, antifogging, anti-icing, anticorrosion, drag-reduction, oil-water separation, water collection, droplet (micro)array, and surface-directed liquid transport, is summarized, and the mechanisms underlying each application are discussed. Finally, the remaining challenges and future perspectives in this area are included.

Colloidal Crystals from Microfluidics

Colloidal crystals are of great interest to researchers because of their excellent optical properties and broad applications in barcodes, sensors, displays, drug delivery, and other fields. Therefore, the preparation of high quality colloidal crystals in large quantities with high speed is worth investigating. After decades of development, microfluidics have been developed that provide new choices for many fields, especially for the generation of functional materials in microscale. Through the design of microfluidic chips, colloidal crystals can be prepared controllably with the advantages of fast speed and low cost. In this Review, research progress on colloidal crystals from microfluidics is discussed. After summarizing the classifications, the generation of colloidal crystals from microfluidics is discussed, including basic colloidal particles preparation, and their assembly inside or outside of microfluidic devices. Then, applications of the achieved colloidal crystals from microfluidics are illustrated. Finally, the future development and prospects of microfluidic-based colloidal crystals are summarized.

Responsive Hydrogel-based Photonic Nanochains for Microenvironment Sensing and Imaging in Real Time and High Resolution

Microenvironment sensing and imaging are of importance in microscale zones like microreactors, microfluidic systems, and biological cells. But they are so far implemented only based on chemical colors from dyes or quantum dots, which suffered either from photobleaching, quenching, or photoblinking behaviors, or from limited color gamut. In contrast, structural colors from hydrogel-based photonic crystals (PCs) may be stable and tunable in the whole visible spectrum by diffraction peak shift, facilitating the visual detection with high accuracy. However, the current hydrogel-based PCs are all inappropriate for microscale detection due to the bulk size. Here we demonstrate the smallest hydrogel-based PCs, responsive hydrogel-based photonic nanochains with high-resolution and real-time response, by developing a general hydrogen bond-guided template polymerization method. A variety of mechanically separated stimuli-responsive hydrogel-based photonic nanochains have been obtained in a large scale including those responding to pH, solvent, and temperature. Each of them has a submicrometer diameter and is composed of individual one-dimensional periodic structure of magnetic particles locked by a tens-of-nanometer-thick peapod-like responsive hydrogel shell. Taking the pH-responsive hydrogel-based photonic nanochains, for example, pH-induced hydrogel volume change notably alters the nanochain length, resulting in a significant variation of the structural color. The submicrometer size endows the nanochains with improved resolution and response time by 2-3 orders of magnitude than the previous counterparts. Our results for the first time validate the feasibility of using structural colors for microenvironment sensing and imaging and may further promote the applications of responsive PCs, such as in displays and printing.

Organic micro/nanoscale materials for photonic barcodes

This review summarizes recent advances in micro/nanoscale photonic barcodes based on organic materials from the aspects of diverse optical encoding techniques.

Liquid photonic crystal detection reagent for reliable sensing of Cu2+ in water

A traditional hydrogel photonic crystal sensor is prepared by multiple steps, including colloidal assembly, polymerization, and recognition group modification, and its measurement repeatability is a challenge due to the inevitable deviations in sensor fabrication and application. In this work, a salicylic acid-containing “SiO₂/propylene carbonate” liquid photonic crystal (Sal-LPC), as a new photonic sensing material, was developed to demonstrate reliable measurement of Cu²⁺ in water. When the Sal-LPC reagent was mixed with the test sample, the Cu²⁺ promoted the release of H⁺ from Sal and shrank the photonic crystal lattice, so that the Cu²⁺ concentration could be determined by the reflection blueshift of liquid PC. The Sal-LPC reagent showed a stronger response to Cu²⁺ than to other cations, and its sensitivity and measurement range could be optimized by the particle fraction and Sal dosage. Compared to traditional PC hydrogel sensors, the liquid PC reagent was composed of colloidal particles and responsive species, which required no strict control in synthesis. More importantly, the optical response of the liquid PC reagent was scarcely affected by changes in synthesis, storage, or application, and it could interact with the analyte quickly and quantitatively, which ensured accurate and repeatable measurement in either chemical analysis or environmental monitoring.

A salicylic acid-containing liquid photonic crystal can detect Cu²⁺ through its reflection blueshift due to the release of H⁺.

Anisotropic structural color particles from colloidal phase separation

Structural color materials have been studied for decades because of their fascinating properties. Effects in this area are the trend to develop functional structural color materials with new components, structures, or morphologies for different applications. In this study, we found that the coassembled graphene oxide (GO) and colloid nanoparticles in droplets could form component phase separations, and thus, previously unknown anisotropic structural color particles (SCPs) with hemispherical colloidal crystal cluster and oblate GO component could be achieved. The anisotropic SCPs, as well as their inverse opal hydrogel derivatives, were endowed with brilliant structural colors and controllable capabilities of fixation, location, orientation, and even responsiveness due to their specific structure, morphology, and components. We have also demonstrated that the anisotropic hydrogel SCPs with these features were ideal candidates for dynamic cell monitoring and sensing. These properties indicate that the anisotropic SCPs and their derivatives have huge potential values in biomedical areas.

Synthesis, Transformation, and Utilization of Monodispersed Colloidal Spheres

Colloidal particles with a spherical shape and diameters in the range of 0.01-1 μm have been a subject of extensive research, with applications in areas such as photonics, electronics, catalysis, drug delivery, and medicine. For most of these applications, it is of critical importance to achieve monodispersity for the size while expanding the diversity in terms of structure and composition. The uniformity in size allows one to establish rigorous correlations between this parameter and the physicochemical properties of the colloidal particles while ensuring experimental repeatability and measurement accuracy. On the other hand, the diversity in structure and composition offers additional handles for tailoring the properties. By switching from the conventional plain, solid structure to a core-shell, hollow, porous, or Janus structure, it offers immediate advantages and creates new opportunities, especially in the context of self-assembly, encapsulation, and controlled release. As for composition, monodispersed colloidal spheres were traditionally limited to amorphous materials such as polystyrene and silica. For metals and semiconducting materials, which are more valuable to applications in photonics, electronics, and catalysis, they tend to crystallize and thus grow anisotropically into nonspherical shapes, especially when their sizes pass 0.1 μm. Taken together, it is no wonder why chemical synthesis of monodispersed colloidal spheres has been a constant theme of research in areas such as colloidal science, materials chemistry, materials science, and soft matter. In this Account, we summarize our efforts over the past two decades in developing solution-phase methods for the facile synthesis of colloidal spheres that are uniform in size, together with a broad range of compositions (including metals and semiconductors) and structures (e.g., solid, core-shell, hollow, porous, and Janus, among others). We start with the synthesis of monodispersed colloidal spheres made of semiconductors, metals with low melting points, and precious metals. Through chemical reactions, these colloidal spheres can be transformed into core-shell or hollow structures with new compositions and properties. Next, we discuss the synthesis of colloidal spheres with a Janus structure while taking a pseudospherical shape. Specifically, metal-polymer hybrid particles composed of one metal nanoparticle partially embedded in the surface of a polymer sphere can be produced through precipitation polymerization in the presence of metal seed. With these Janus particles serving as templates, other types of Janus structures such as hollow spheres with a single hole in the surface can be obtained via site-selected deposition. Alternatively, such hollow spheres can be fabricated through a physical transformation process that involves swelling of polymer spheres, followed by freeze-drying. All these synthesis and transformation processes are solution-based, offering flexibility and potential for large-scale production. At the end, we highlight some of the applications enabled by these colloidal spheres, including fabrication of photonic devices, encapsulation, and controlled release for nanomedicine.

Flexible Ferrofluids: Design and Applications

Ferrofluids, also known as ferromagnetic particle suspensions, are materials with an excellent magnetic response, which have attracted increasing interest in both industrial production and scientific research areas. Because of their outstanding features, such as rapid magnetic reaction, flexible flowability, as well as tunable optical and thermal properties, ferrofluids have found applications in various fields, including material science, physics, chemistry, biology, medicine, and engineering. Here, a comprehensive, in-depth insight into the diverse applications of ferrofluids from material fabrication, droplet manipulation, and biomedicine to energy and machinery is provided. Design of ferrofluid-related devices, recent developments, as well as present challenges and future prospects are also outlined.

Eye-recognizable and repeatable biochemical flexible sensors using low angle-dependent photonic colloidal crystal hydrogel microbeads

This paper presents eye-recognizable and repeatable biochemical flexible sensors using low angle-dependent stimuli-responsive photonic colloidal crystal hydrogel (PCCG) microbeads. Thanks to the stimuli-responsive PCCG microbeads exhibiting structural color, users can obtain sensing information without depending on the viewing angle and the mechanical deformation of the flexible sensor. Temperature-responsive PCCG microbeads and ethanol-responsive PCCG microbeads were fabricated from a pre-gel solution of N-isopropylacrylamide (NIPAM) and N-methylolacrylamide (NMAM) by using a centrifuge-based droplet shooting device (CDSD). As a proof-of-concept of thin and flexible biochemical sensors, temperature- and ethanol-sensing devices were demonstrated. By comparing the structural color of the stimuli-responsive PCCG microbeads and the color chart of the device, sensing information, including skin temperature of the human body and ethanol concentration in alcoholic beverages, was obtained successively. We expect that our device design using low angle-dependent stimuli-responsive PCCG microbeads would contribute to the development of user-friendly biochemical sensor devices for monitoring environmental and healthcare targets.

Spherical Colloidal Photonic Crystals with Selected Lattice Plane Exposure and Enhanced Color Saturation for Dynamic Optical Displays

While structural color materials have nonfading properties and contribute significantly to the sustainable development of pigments or dyes, they are plagued by low color saturation and limited color tunability. Here, we describe a new type of spherical colloidal photonic crystals (CPCs) prepared by a droplet-based microfluidic strategy, featuring enhanced color saturation and tunable structural colors. Methyl viologen (MV) functionalized SiO₂ colloids were synthesized and used for the preparation of CPCs in microdroplets. Because of the absorption of incoherently scattered light by MV, the ratio of peak-to-background amplitude in the reflectance spectra of CPCs is increased, leading to brilliant structural color with enhanced saturation. The lattice plane exposure of spherical CPCs depends on the refractive index contrast between the filling medium and SiO₂ building blocks, and this offers an alternative way to tune the structural color in a spherical CPC. Accordingly, a dynamic optical display was constructed, providing valuable insights to the future development of structural color-based sensors, surface coatings, or displays.