RAFT Polymerization and Some of its Applications

Beyond Traditional RAFT: Alternative Activation of Thiocarbonylthio Compounds for Controlled Polymerization

Recent developments in polymerization reactions utilizing thiocarbonylthio compounds have highlighted the surprising versatility of these unique molecules. The increasing popularity of reversible addition-fragmentation chain transfer (RAFT) radical polymerization as a means of producing well-defined, 'controlled' synthetic polymers is largely due to its simplicity of implementation and the availability of a wide range of compatible reagents. However, novel modes of thiocarbonylthio activation can expand the technique beyond the traditional system (i.e., employing a free radical initiator) pushing the applicability and use of thiocarbonylthio compounds even further than previously assumed. The primary advances seen in recent years are a revival in the direct photoactivation of thiocarbonylthio compounds, their activation via photoredox catalysis, and their use in cationic polymerizations. These synthetic approaches and their implications for the synthesis of controlled polymers represent a significant advance in polymer science, with potentially unforeseen benefits and possibilities for further developments still ahead. This Research News aims to highlight key works in this area while also clarifying the differences and similarities of each system.

Tuning the size of styrene-maleic acid copolymer-lipid nanoparticles (SMALPs) using RAFT polymerization for biophysical studies

Characterization of membrane proteins is challenging due to the difficulty in mimicking the native lipid bilayer with properly folded and functional membrane proteins. Recently, styrene-maleic acid (StMA) copolymers have been shown to facilitate the formation of disc-like lipid bilayer mimetics that maintain the structural and dynamic integrity of membrane proteins. Here we report the controlled synthesis and characterization of StMA containing block copolymers. StMA polymers with different compositions and molecular weights were synthesized and characterized by size exclusion chromatography (SEC). These polymers act as macromolecular surfactants for 1-Palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC)/1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-(1'-rac-glycerol (POPG) lipids, forming disc like structures of the lipids with the polymer wrapping around the hydrophobic lipid edge. A combination of dynamic light scattering (DLS), solid-state nuclear magnetic resonance (SSNMR) spectroscopy, and transmission electron microscopy (TEM) was used to characterize the size of the nanoparticles created using these StMA polymers. At a weight ratio of 1.25:1 StMA to lipid, the nanoparticle size created is 28+1nm for a 2:1 ratio, 10+1nm for a 3:1 StMA ratio and 32+1nm for a 4:1 StMA ratio independent of the molecular weight of the polymer. Due to the polymer acting as a surfactant that forms disc like nanoparticles, we term these StMA based block copolymers "RAFT SMALPs". RAFT SMALPs show promise as a new membrane mimetic with different nanoscale sizes, which can be used for a wide variety of biophysical studies of membrane proteins.

A Versatile and Scalable Strategy to Discrete Oligomers

A versatile strategy is reported for the multigram synthesis of discrete oligomers from commercially available monomer families, e.g., acrylates, styrenics, and siloxanes. Central to this strategy is the identification of reproducible procedures for the separation of oligomer mixtures using automated flash chromatography systems with the effectiveness of this approach demonstrated through the multigram preparation of discrete oligomer libraries (Đ = 1.0). Synthetic availability, coupled with accurate structural control, allows these functional building blocks to be harnessed for both fundamental studies as well as targeted technological applications.

Preparation of Well-Defined Propargyl-Terminated Tetra-Arm Poly(N-isopropylacrylamide)s and Their Click Hydrogels Crosslinked with β-cyclodextrin

As an important class of reversible deactivation radical polymerization (RDRP), reversible addition fragmentation chain transfer (RAFT) polymerization has attracted great attention attributed to its facile and flexible features to prepare well-defined polymers with different complex structures. In addition, the combination of RAFT with click chemistry provides more effective strategies to fabricate advanced functional materials. In this work, a series of temperature responsive tetra-arm telechelic poly(N-isopropylacrylamide)s (PNIPAs) with propargyl end groups were prepared for the first time through RAFT and subsequent aminolysis/Michael addition modification. The temperature sensitivities of their aqueous solutions were researched via turbidity measurement. It was found that the phase transition temperature of obtained PNIPAs increased with their molecular weights ascribed to their distinctions in the hydrophobic/hydrophilic balance. Subsequently, β-cyclodextrin (β-CD) functionalized with azide moieties was used to crosslink the prepared propargyl-terminated tetra-arm PNIPAs through click chemistry, fabricating corresponding hydrogels with thermoresponse. Similar to their precursors, the hydrogels demonstrated the same dependence of volume phase transition temperature (VPTT) on their molecular weights. In addition, the incorporation of β-CD and the residual groups besides crosslinking may provide a platform for imparting additional functions such as inclusion and adsorption as well as further functionalization.

A Critical Appraisal of RAFT-Mediated Polymerization-Induced Self-Assembly

Recently, polymerization-induced self-assembly (PISA) has become widely recognized as a robust and efficient route to produce block copolymer nanoparticles of controlled size, morphology, and surface chemistry. Several reviews of this field have been published since 2012, but a substantial number of new papers have been published in the last three years. In this Perspective, we provide a critical appraisal of the various advantages offered by this approach, while also pointing out some of its current drawbacks. Promising future research directions as well as remaining technical challenges and unresolved problems are briefly highlighted.

Synthesis and self-assembly of carbamoylmethylphosphonate acrylamide-based diblock copolymers: new valuable thermosensitive materials

We report the synthesis by RAFT polymerization of well-defined diblock copolymers bearing carbamoylmethylphosphonate moieties which proved to sorb gadolinium. These poly(diethyl-6-(acrylamido)hexylcarbamoylmethylphosphonate-b-acrylic acid) (P(CPAAm6C-b-AA)) copolymers were able to self-assemble as a function of temperature, above their cloud point value.

Iron-Mediated Homogeneous ICAR ATRP of Methyl Methacrylate under ppm Level Organometallic Catalyst Iron(III) Acetylacetonate

Atom Transfer Radical Polymerization (ATRP) is an important polymerization process in polymer synthesis. However, a typical ATRP system has some drawbacks. For example, it needs a large amount of transition metal catalyst, and it is difficult or expensive to remove the metal catalyst residue in products. In order to reduce the amount of catalyst and considering good biocompatibility and low toxicity of the iron catalyst, in this work, we developed a homogeneous polymerization system of initiators for continuous activator regeneration ATRP (ICAR ATRP) with just a ppm level of iron catalyst. Herein, we used oil-soluble iron (III) acetylacetonate (Fe(acac)₃) as the organometallic catalyst, 1,1'-azobis (cyclohexanecarbonitrile) (ACHN) with longer half-life period as the thermal initiator, ethyl 2-bromophenylacetate (EBPA) as the initiator, triphenylphosphine (PPh₃) as the ligand, toluene as the solvent and methyl methacrylate (MMA) as the model monomer. The factors related with the polymerization system, such as concentration of Fe(acac)₃ and ACHN and polymerization kinetics, were investigated in detail at 90 °C. It was found that a polymer with an acceptable molecular weight distribution (Mw/Mn = 1.43 at 45.9% of monomer conversion) could be obtained even with 1 ppm of Fe(acac)₃, making it needless to remove the residual metal in the resultant polymers, which makes such an ICAR ATRP process much more industrially attractive. The "living" features of this polymerization system were further confirmed by chain-extension experiment.

Photoinduced Electron Transfer Reactions for Macromolecular Syntheses

Photochemical reactions, particularly those involving photoinduced electron transfer processes, establish a substantial contribution to the modern synthetic chemistry, and the polymer community has been increasingly interested in exploiting and developing novel photochemical strategies. These reactions are efficiently utilized in almost every aspect of macromolecular architecture synthesis, involving initiation, control of the reaction kinetics and molecular structures, functionalization, and decoration, etc. Merging with polymerization techniques, photochemistry has opened up new intriguing and powerful avenues for macromolecular synthesis. Construction of various polymers with incredibly complex structures and specific control over the chain topology, as well as providing the opportunity to manipulate the reaction course through spatiotemporal control, are one of the unique abilities of such photochemical reactions. This review paper provides a comprehensive account of the fundamentals and applications of photoinduced electron transfer reactions in polymer synthesis. Besides traditional photopolymerization methods, namely free radical and cationic polymerizations, step-growth polymerizations involving electron transfer processes are included. In addition, controlled radical polymerization and "Click Chemistry" methods have significantly evolved over the last few decades allowing access to narrow molecular weight distributions, efficient regulation of the molecular weight and the monomer sequence and incredibly complex architectures, and polymer modifications and surface patterning are covered. Potential applications including synthesis of block and graft copolymers, polymer-metal nanocomposites, various hybrid materials and bioconjugates, and sequence defined polymers through photoinduced electron transfer reactions are also investigated in detail.

Probing the molecular design of hyper-branched aryl polyesters towards lubricant applications

We report novel polymeric materials that may be used as viscosity index improvers (VII) for lubricant applications. Our efforts included probing the comb-burst hyper-branched aryl polyester architecture for beneficial viscosity and friction behavior when utilized as an additive in a group I oil. The monomer was designed as to undergo polymerization via polycondensation within the architectural construct (AB2), typical of hyperbranched polymers. The monomer design was comprised of aliphatic arms (12 or 16 methylenes) to provide the necessary lipophilicity to achieve solubility in a non-polar medium. Once polymerized, via catalyst and heat, the surface alcohols were functionalized with fatty acids (lauric and palmitic). Controlling the aliphatic nature of the internal arms and peripheral end-groups provided four unique flexible polymer designs. Changing the reaction time and concentration provided opportunities to investigate the influence of molecular weight and branching density on oil-solubility, viscosity, and friction. Oil-solubility was found to decrease with fewer internal carbons, but the number of internal carbons appears to have little influence on the bulk solution viscosity. At concentrations of 2 wt % in a group I base oil, these polymer additives demonstrated an improved viscosity index and reduced friction coefficient, validating the basic approach.

The xanthate route to organofluorine derivatives. A brief account

The radical chemistry of xanthates allows numerous approaches to organofluorine compounds.

Visible and sunlight driven RAFT photopolymerization accelerated by amines: kinetics and mechanism

RAFT polymerization using only tertiary amines under visible light or sunlight is studied, to determine the kinetics of polymerization, and the system is applied to various monomers giving well-defined homo and block copolymers.

Recyclable polyisobutylene (PIB)-bound organic photoredox catalyst catalyzed polymerization reactions

The preparation of a recyclable polyisobutylene-bound 10-phenylphenothiazine (PIB-PTH) organophotoredox catalyst and its application in radical polymerization of acrylates are discussed.

Dithiocarbamate RAFT agents with broad applicability – the 3,5-dimethyl-1H-pyrazole-1-carbodithioates

The RAFT agents offerĐ< 1.1 for MAMs, methyl acrylate (MA),N,N-dimethylacrylamide (DMA) and styrene, andĐ< 1.3 for LAMs, vinyl acetate (VAc); versatility and end-group fidelity was proved with synthesis both polyDMA-block-polyMA and polyDMA-block-polyVAc.

Metal-free RAFT cationic polymerization of p-methoxystyrene with HCl·Et2O using a xanthate-type RAFT cationogen

A xanthate-type RAFT cationogen (IBEX) mediates the metal-free cationic polymerization of pMOS with HCl·Et₂O via the degenerative addition–fragmentation of cationic species, i.e. the RAFT mechanism.

Investigation into the photolytic stability of RAFT agents and the implications for photopolymerization reactions

The photolytic stability of RAFT agents under blue LED irradiation has been investigated with regard to photopolymerization reactions.

Folate Receptor-Targeted Polymeric Micellar Nanocarriers for Delivery of Orlistat as a Repurposed Drug against Triple-Negative Breast Cancer

Triple-negative breast cancer (TNBC) is a recalcitrant malignancy with no available targeted therapy. Off-target effects and poor bioavailability of the FDA-approved antiobesity drug orlistat hinder its clinical translation as a repurposed new drug against TNBC. Here, we demonstrate a newly engineered drug formulation for packaging orlistat tailored to TNBC treatment. We synthesized TNBC-specific folate receptor-targeted micellar nanoparticles (NP) carrying orlistat, which improved the solubility (70-80 μg/mL) of this water-insoluble drug. The targeted NPs also improved the delivery and bioavailability of orlistat to MDA-MB-231 cells in culture and to tumor xenografts in a nude mouse model. We prepared HEA-EHA copolymer micellar NPs by copolymerization of 2-hydroxyethylacrylate (HEA) and 2-ethylhexylacrylate (EHA), and functionalized them with folic acid and an imaging dye. Fluorescence-activated cell sorting (FACS) analysis of TNBC cells indicated a dose-dependent increase in apoptotic populations in cells treated with free orlistat, orlistat NPs, and folate-receptor-targeted Fol-HEA-EHA-orlistat NPs in which Fol-HEA-EHA-orlistat NPs showed significantly higher cytotoxicity than free orlistat. In vitro analysis data demonstrated significant apoptosis at nanomolar concentrations in cells activated through caspase-3 and PARP inhibition. In vivo analysis demonstrated significant antitumor effects in living mice after targeted treatment of tumors, and confirmed by fluorescence imaging. Moreover, folate receptor-targeted Fol-DyLight747-orlistat NP-treated mice exhibited significantly higher reduction in tumor volume compared to control group. Taken together, these results indicate that orlistat packaged in HEA-b-EHA micellar NPs is a highly promising new drug formulation for TNBC therapy. Mol Cancer Ther; 15(2); 221-31. ©2015 AACR.

The interaction of sterically stabilized magnetic nanoparticles with fresh human red blood cells

Sterically stabilized superparamagnetic iron oxide nanoparticles (SPIONs) were incubated with fresh human erythrocytes (red blood cells [RBCs]) to explore their potential application as magnetic resonance imaging contrast agents. The chemical shift and linewidth of (133)Cs(+) resonances from inside and outside the RBCs in (133)Cs nuclear magnetic resonance spectra were monitored as a function of time. Thus, we investigated whether SPIONs of two different core sizes and with three different types of polymeric stabilizers entered metabolically active RBCs, consuming glucose at 37°C. The SPIONs broadened the extracellular (133)Cs(+) nuclear magnetic resonance, and brought about a small change in its chemical shift to a higher frequency; while the intracellular resonance remained unchanged in both amplitude and chemical shift. This situation pertained over incubation times of up to 90 minutes. If the SPIONs had entered the RBCs, the intracellular resonance would have become broader and possibly even shifted. Therefore, we concluded that our SPIONs did not enter the RBCs. In addition, the T 2 relaxivity of the small and large particles was 368 and 953 mM(-1) s(-1), respectively (three and nine times that of the most effective commercially available samples). This suggests that these new SPIONs will provide a superior performance to any others reported thus far as magnetic resonance imaging contrast agents.

Stereo-, Temporal and Chemical Control through Photoactivation of Living Radical Polymerization: Synthesis of Block and Gradient Copolymers

Nature has developed efficient polymerization processes, which allow the synthesis of complex macromolecules with a perfect control of tacticity as well as molecular weight, in response to a specific stimulus. In this contribution, we report the synthesis of various stereopolymers by combining a photoactivated living polymerization, named photoinduced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) with Lewis acid mediators. We initially investigated the tolerance of two different photoredox catalysts, i.e., Ir(ppy)3 and Ru(bpy)3, in the presence of a Lewis acid, i.e., Y(OTf)3 and Yb(OTf)3, to mediate the polymerization of N,N-dimethyl acrylamide (DMAA). An excellent control of tacticity as well as molecular weight and dispersity was observed when Ir(ppy)3 and Y(OTf)3 were employed in a methanol/toluene mixture, while no polymerization or poor control was observed with Ru(bpy)3. In comparison to a thermal system, a lower amount of Y(OTf)3 was required to achieve good control over the tacticity. Taking advantage of the temporal control inherent in our system, we were able to design complex macromolecular architectures, such as atactic block-isotactic and isotactic-block-atactic polymers in a one-pot polymerization approach. Furthermore, we discovered that we could modulate the degree of tacticity through a chemical stimulus, by varying [DMSO]0/[Y(OTf)3]0 ratio from 0 to 30 during the polymerization. The stereochemical control afforded by the addition of a low amount of DMSO in conjunction with the inherent temporal control enabled the synthesis of stereogradient polymer consisting of five different stereoblocks in one-pot polymerization.

Synthesis and optical properties of gold nanoparticle networks cross-linked with chain-length-controlled polymers

We synthesized gold nanoparticle networks by a cross-linking of gold nanoparticles with chain-length-controlled polymers having SH groups at both termini.

Sequential Michael addition thiol–ene and radical-mediated thiol–ene reactions in one-pot produced sequence-ordered polymers

Sequential Michael addition-based thiol–ene and free radical mediated thiol–ene reactions for preparing sequence-ordered polymers are reported for the first time.

Toward a tunable synthetic [FeFe] hydrogenase mimic: single-chain nanoparticles functionalized with a single diiron cluster

We report two novel “clickable” [(μ-S₂C₂H₄NR)Fe₂(CO)₆] complexes and their incorporation into single-chain nanoparticles.

A simple route to deuterated polystyrene block copolymers by reverse iodine transfer polymerisation

For the first time, deuterated polystyrene block copolymers were synthesized by RITP and analysed by advanced fractionation and spectroscopic methods.

Novel thermothickening lubricant with elastomeric nano-particles

Modified silicone oil with crosslinked silicon elastomeric nano-particles exhibits excellent viscosity–temperature characteristics.

Model-based design of the polymer microstructure: bridging the gap between polymer chemistry and engineering

A state-of-the-art review is presented on model-based design for next-generation polymer synthesis and modification.

Thermoresponsive polymer coated gold nanoparticles: from MADIX/RAFT copolymerization of N-vinylpyrrolidone and N-vinylcaprolactam to salt and temperature induced nanoparticle aggregation

In the present contribution, we report the synthesis of thermoresponsive homo and statistical copolymers of N-vinylcaprolactam and N-vinylpyrrolidone and the corresponding responsive gold nanoparticles.

Facile and universal photo-induced living radical polymerization system mediated by iniferter agent and copper(ii) acetate at ambient temperature

A facile and universal photo-induced living radical polymerization with a wide range of monomers was developed in the presence of iniferter agent MANDC and organic catalyst copper(ii) acetate under UV irradiation at ambient temperature.