Molecular single-bond covalent radii for elements 1-118

Sn(II)-carbon bond reactivity: radical generation and consumption via reactions of a stannylene with alkynes

Thermal Sn-C cleavage in the diarylstannylene Sn(AriPr4)2 (AriPr4 = C6H3-2,6-(C6H3-2,6-iPr2)2) was used to generate ˙Sn(AriPr4) and ˙AriPr4 radicals for alkyne arylstannylation. The radical pair and RCCR' (R = H, R' = Ph; R = Ph, R' = Ph; R = H, R' = C4H9; R = H, R' = SiMe3) in refluxing benzene generate the aryl vinyl stannylene complexes, AriPr4Sn{C(C6H5)-C(H)(AriPr4)} (1), AriPr4Sn{C(C6H5)-C(H)(C6H5)} (2) and AriPr4Sn{C(C4H9)-C(H)(AriPr4)} (3) respectively. For HCCSiMe3, the known distannene {Sn(CCSiMe3)AriPr4}2 (4) was also generated from this new method.

Synthesis and Reactivity of Hetero-Pnictogen Diazonium Analogs Stabilized by Transition Metal Units

The reactivity of the mixed dipnictogen complexes [{CpMo(CO)2 }2 (μ,η2 : 2 -PE)] (E=P, As, Sb) towards different group 14 electrophiles is reported. The resulting library of cationic compounds [{CpMo(CO)2 }2 (μ,η2 : 2 -EPR)]+ (R=Mes (2,4,6-C6 H2 Me3 ), CH3 , CPh3 , SnMe3 ) represents formally inorganic diazonium homologs which are stabilized by transition metal units. Modifying the steric and electronic properties of the electrophile drastically impacts the respective P-R bond lengths and is accompanied by increasing (SnMe3 >CPh3 >CH3 ) dynamic behavior in solution. In contrast to the well-studied organic analogs, the prepared compounds are stable at room temperature. The subsequent reaction of the model substrate [{CpMo(CO)2 }2 (μ,η2 : 2 -P2 Me)][OTf] ([OTf]- =[CF3 SO3 ]- ) with different N-heterocyclic carbenes (NHCs) leads to an addition at the unsubstituted P atom which is also predicted by computational methods. NMR spectroscopy confirms the formation of two isomers sync/gauche-[{CpMo(CO)2 }(μ,η2 : 1 -P(NHC)PMe){CpMo(CO)2 }][OTf]. X-ray crystallographic characterization and additional DFT calculations shed light on the spatial arrangement as well as on the possible formation pathways of the isomers.

Synergistic Effect of Electron Scattering and Space Charge Transfer Enabled Unprecedented Room Temperature NO2 Sensing Response of SnO2

Metal oxide gas sensors have long faced the challenge of low response and poor selectivity, especially at room temperature (RT). Herein, a synergistic effect of electron scattering and space charge transfer is proposed to comprehensively improve gas sensing performance of n-type metal oxides toward oxidizing NO2 (electron acceptor) at RT. To this end, the porous SnO2 nanoparticles (NPs) assembled from grains of about 4 nm with rich oxygen vacancies are developed through an acetylacetone-assisted solvent evaporation approach combined with precise N2 and air calcinations. The results show that the as-fabricated porous SnO2 NPs sensor exhibits an unprecedented NO2 -sensing performance, including outstanding response (Rg /Ra  = 772.33 @ 5 ppm), fast recovery (<2 s), an extremely low detection limit (10 ppb), and exceptional selectivity (response ratio >30) at RT. Theoretical calculation and experimental tests confirm that the excellent NO2 sensing performance is mainly attributed to the unique synergistic effect of electron scattering and space charge transfer. This work proposes a useful strategy for developing high-performance RT NO2 sensors using metal oxides, and provides an in-depth understanding for the basic characteristics of the synergistic effect on gas sensing, paving the way for efficient and low power consumption gas detection at RT.

Magnesium complexes supported by a dianionic double layer nitrogen-phosphorus ligand: a synthesis and reactivity study

A heterobimetallic complex [MeN(CH2CH2NPiPr)2MgLiCl(THF)]2 (1) supported by a dianionic double layer nitrogen-phosphorus ligand was synthesized by the reaction of H2L1 (H2L1 = MeN(CH2CH2NHPiPr)2) with MgCl2 in the presence of n-BuLi. Reactions of complex 1 with 2 equivalents of CuI, AgI and AuCl·SMe2 led to the formation of heterobimetallic clusters [MeN(CH2CH2NPiPr)2MgCuI]2 (2), [MeN(CH2CH2NPiPr)2MgAgI]2 (3) and [MeN(CH2CH2NPiPr)2MgAuCl]2 (4), respectively. X-ray single-crystal diffraction analysis revealed that these complexes are dimers, which are composed of two [MeN(CH2CH2NPiPr)2Mg] units connected by coinage metals (i.e., Cu, Ag, and Au). The reactivity of 1 was further investigated and it was found that complex 1 could react with 4 equivalents of MeI, giving a complex [CH3N(CH2CH2NPiPr2Me)2MgI]+[I]- (5), which can be viewed as a magnesium complex supported by a neutral double layer nitrogen-phosphorus ligand (CH3N(CH2CH2NPiPr2Me)2). Complex 1 could also react with 2 equivalents of NaNH2, leading to the isolation of an amido anion bridged magnesium-sodium heterobimetallic cluster [MeN(CH2CH2NPiPr)2MgNaNH2]2 (6).

Role of Partial Vacancy and Structural Distortion in the Stability of Nonstoichiometric Phases Ni7-δInSe2-xSx (1.26 ≥ δ ≥ 0.94; 0 ≤ x ≤ 1.33)

This study explores the structure and stability of partly disordered sulfur-substituted Ni5.74InSe2 (I4/mmm, a = 3.6766(1) Å, c = 18.8178(10) Å, Z = 2). The structure of Ni7-δInSe2-xSx (x = 0.2, 0.36, 0.66, 0.80, 0.94) compounds is isotypic to their parent Ni5.74InSe2 and can be viewed as alternating heterometallic Cu3Au-type ∞2[Ni3In] slabs and defective Cu2Sb-type ∞2[Ni4-δ(Se/S)2] slabs along the [001]-axis. Similar to the parent Se-compound, the Ni-Ch (Ch = chalcogen) fragment is non-stoichiometric and possesses a partially occupied Ni-site. It was observed that with sulfur insertion at the selenium site of Ni5.74InSe2, the interatomic distance between the partially occupied nickel and mixed (S/Se) sites decreases from ∼2.24 to ∼1.95 Å, and the occupancy of the disordered nickel site simultaneously increases. The limiting composition Ni6.06InSe0.67S1.33 (x = 1.33, δ = 0.94) is formed in the sulfur-rich region. Its average structure resembles the Ni6SnS2-type and has a similar motif to Ni5.74InSe2; the only difference is that Cu3Au-type ∞2[Ni3In] alternates with two types of Ni-Ch fragments (Cu2Sb or Li2O type units). By using first-principles electronic structure calculations, we explained the presence of partially disordered nickel sites in the Ni-Ch fragment and rationalized why the nickel site occupancy increases with sulfur insertion.

Donor Radii in Rare-Earth Complexes

We present a set of donor radii for the rare-earth cations obtained from the analysis of structural data available in the Cambridge Structural Database (CSD). Theoretical calculations using density functional theory (DFT) and wave function approaches (NEVPT2) demonstrate that the Ln-donor distances can be broken down into contributions of the cation and the donor atom, with the minimum in electron density (ρ) that defines the position of (3,-1) critical points corresponding well with Shannon's crystal radii (CR). Subsequent linear fits of the experimental bond distances for all rare earth cations (except Pm3+) afforded donor radii (rD) that allow for the prediction of Ln-donor distances regardless of the nature of the rare-earth cation and its oxidation state. This set of donor radii can be used to rationalize structural data and identify particularly weak or strong interactions, which has important implications in the understanding of the stability and reactivity of complexes of these metal ions. A few cases of incorrect atom assignments in X-ray structures were also identified using the derived rD values.

Synthesis and Reactivity of Highly Electron-Rich Zerovalent Group 10 Diborabenzene Pogo-Stick Complexes

A cyclic alkyl(amino)carbene (CAAC)-stabilized 1,4-diborabenzene (DBB, 1) reacts with the group 10 precursor [Ni(CO)4] to yield the DBB pogo-stick complex [(η6-DBB)Ni(CO)] (2) as a dark-green crystalline solid. The IR-spectroscopic and X-ray crystallographic data of 2 highlight the strong π-donor properties of the DBB ligand. The reaction of 1 with [M(nbe)2] (M = Pd, Pt; nbe = norbornene) yields the unique zerovalent heavier group 10 arene pogo-stick complexes [(η6-DBB)M(nbe)] (3-M), isolated as dark-purple and black crystalline solids, respectively. 3-Pd and 3-Pt show strong near-IR (NIR) absorptions at 835 and 904 nm, respectively. Time-dependent density functional theory (TD-DFT) calculations show that these result from the S0→S1 excitation, which corresponds to a transfer of electron density from a metal d orbital aligned with the z direction (dxz or dyz) to a d orbital located in the xy plane (dxy or dx2-y2), with the redshift for 3-Pt resulting from the higher spin-orbit coupling (SOC). In complex 2, electron donation from the nickel center into the carbonyl 2π* orbital destabilizes the DBB···Ni interaction, resulting in an absorption at a higher energy. Complexes 2 and 3-M react with [Fe(CO)5] to yield the doubly CO-bridged M(0)→Fe(0) (M = Ni, Pd, Pt) metal-only Lewis pairs (MOLPs) 4-M as black (M = Ni, Pt) and dark-turquoise (M = Pd) crystalline solids. Furthermore, 3-Pt undergoes oxidative Sn-H addition with Ph3SnH to yield the corresponding Pt(II) stannyl hydride, [(η6-DBB)PtH(SnPh3)] (5).

Homoleptic and heteroleptic ketodiiminate zinc complexes for the ROP of cyclic l-lactide

Homo- and heteroleptic ketodiiminate zinc complexes L12Zn2 (1, L1 = [Me2NC2H4NC(Me)CH]2CO), L2(ZnCp)2 (2, L2 = [Me2NC3H6NC(Me)CH]2CO, Cp = C5H5) and L2HZnCp* (3, Cp* = C5Me5) were synthesized and characterized by 1H and 13C NMR and IR spectroscopy as well as by elemental analysis and single crystal X-ray diffraction (sc-XRD, 2, 3). The catalytical activity of heteroleptic complexes 2 and 3 were tested in the ring-opening polymerization (ROP) of l-lactide. Homobimetallic complex 2 showed the highest activity and selectivity for the synthesis of cyclic polylactide (cPLLA; TOF = 17 460 h-1) at 100 °C in toluene solution, while linear polymers are formed with mononuclear complex 3.

Dimerization and ring-opening in bis(diisopropylamino)cyclopropenylidene (BAC) mediated by [U(NR2)3(CCPh)] (R = SiMe3)

Addition of 2 equiv. of bis(diisopropylamino)cyclopropenylidene (BAC) to [U(NR2)3(CCPh)] (1, R = SiMe3), in Et2O, results in formation of [cyclo-N(iPr)C(Me)2CH(NiPr2)C{CHC3(NiPr2)2}][U(NR2)2(N(SiMe3)SiMe2CH2)(CCPh)] (2) in moderate isolated yield. Complex 2 is the result of coupling and protonation of two BAC molecules, where complex 1 contributes the required proton. It was characterized by NMR spectroscopy and X-ray crystallography and represents a new mode of reactivity of the cyclopropenylidene fragment.

Low-Coordinate Magnesium Sulfide and Selenide Complexes

The reactions of [{(iPrDipNacNac)Mg}2] 1 (iPrDipnacnac = HC(iPrCNDip)2) with Ph3P═O at 100 °C afforded the phosphinate complex [(iPrDipNacNac)Mg(OPPh3)(OPPh2)] 3. Reactions of 1 with Ph3P═E (E = S, Se) proceeded rapidly at room temperature to low-coordinate chalcogenide complexes [{(iPrDipNacNac)Mg}2(μ-S)] 4 and [{(iPrDipNacNac)Mg}2(μ-Se)] 5, respectively. Similarly, reactions of RNHC═S ((MeCNR)2C═S with R = Me, Et, or iPr) with 1 afforded NHC adducts of magnesium sulfide complexes, [{(iPrDipNacNac)Mg(RNHC)}(μ-S){Mg(iPrDipNacNac)}] 6, that could alternatively be obtained by adding the appropriate RNHC to sulfide complex 4. Complex 4 reacted with 1-adamantylazide (AdN3) to give [{(iPrDipNacNac)Mg}2(μ-SN3Ad)] 7 and can form various simple donor adducts in solution, of which [(iPrDipNacNac)Mg(OAd)}2(μ-S)] 8a (OAd = 2-adamantanone) was structurally characterized. The nature of the ionic Mg-E-Mg unit is described by solution and solid-state studies of the complexes and by DFT computational investigations.

Syntheses and Structures of 5-Membered Heterocycles Featuring 1,2-Diphospha-1,3-Butadiene and Its Radical Anion

LGa(P2 OC)cAAC 2 features a 1,2-diphospha-1,3-butadiene unit with a delocalized π-type HOMO and a π*-type LUMO according to DFT calculations. [LGa(P2 OC)cAAC][K(DB-18-c-6)] 3[K(DB-18-c-6] containing the 1,2-diphospha-1,3-butadiene radical anion 3⋅- was isolated from the reaction of 2 with KC8 and dibenzo-18-crown-6. 3 reacted with [Fc][B(C6 F5 )4 ] (Fc=ferrocenium) to 2 and with TEMPO to [L-H Ga(P2 OC)cAAC][K(DB-18-c-6)] 4[K(DB-18-c-6] containing the 1,2-diphospha-1,3-butadiene anion 4- . The solid state structures of 2, 3K(DB-18-c-6], and 4[K(DB-18-c-6] were determined by single crystal X-ray diffraction (sc-XRD).

Heterometallic Clusters with Cerium-Transition-Metal Bonding Supported by Nitrogen-Phosphorus Ligands

Ligands are known to play a crucial role in the construction of complexes with metal-metal bonds. Compared with metal-metal bonds involving d-block transition metals, knowledge of the metal-metal bonds involving f-block rare-earth metals still lags far behind. Herein, we report a series of complexes with cerium-transition-metal bonds, which are supported by two kinds of nitrogen-phosphorus ligands N[CH2CH2NHPiPr2]3 (VI) and PyNHCH2PPh2 (VII). The reactions of zerovalent group 10 metal precursors, Pd(PPh3)4 and Pt(PPh3)4, with the cerium complex supported by VI generate heterometallic clusters [N{CH2CH2NPiPr2}3Ce(μ-M)]2 (M = Pd, 2 and M = Pt, 3) featuring four Ce-M bonds; meanwhile, the bimetallic species [(PyNCH2PPh2)3Ce-M] (M = Ni, 5; M = Pd, 6; and M = Pt, 7) with a single Ce-M bond were isolated from the reactions of the cerium precursor 4 supported by VII with Ni(COD)2, Pd(PPh3)4, or Pt(PPh3)4, respectively. These complexes represent the first example of species with an RE-M bond between Ce and group 10 metals, and 2 and 3 contain the largest number of RE-M donor/acceptor interactions ever to have been observed in a molecule.

Triplet bismuthinidenes featuring unprecedented giant and positive zero field splittings

Isolation of triplet pnictinidenes, which bear two unpaired electrons at the pnictogen centers, has long been a great challenge due to their intrinsic high reactivity. Herein, we report the syntheses and characterizations of two bismuthinidenes MsFluindtBu-Bi (3) and MsFluind*-Bi (4) stabilized by sterically encumbered hydrindacene ligands. They were facilely prepared through reductions of the corresponding dichloride precursors with 2 molar equivalents of potassium graphite. The structural analyses revealed that 3 and 4 contain a one-coordinate bismuth atom supported by a Bi-C single σ bond. As a consequence, the remaining two Bi 6p orbitals are nearly degenerate, and 3 and 4 possess triplet ground states. Experimental characterizations with multinuclear magnetic resonance, magnetometry and near infrared spectroscopy coupled to wavefunction based ab initio calculations concurred to evidence that there exist giant and positive zero field splittings (>4300 cm-1) in their S = 1 ground states. Hence even at room temperature the systems almost exclusively populate the lowest-energy nonmagnetic Ms = 0 level, which renders them seemingly diamagnetic.

Coordination engineering of atomically dispersed zirconium on graphene for the oxygen reduction reaction

We study the effect of boron and sulfur doping on graphene with atomically dispersed zirconium as an electrocatalyst for the oxygen reduction reaction (ORR) by using density functional theory (DFT). The use of Zr as a metal center offers a highly stable catalyst due to the high electronegativity difference between Zr and its ligand. The origin of the ORR activity improvement has been investigated thoroughly. Here, we proposed a novel geometric descriptor for an atomically dispersed zirconium on a nitrogen-doped graphene catalyst with an axial oxygen ligand, which is the fractional coordination number of the Zr atom. We found that the fractional coordination number can successfully describe the shift of the dz2 band center in the doped compound, which is related to the binding energy of the Zr to the O ligand. We also found that the oxygen ligand is mobile during the adsorption process of ORR intermediates, and hence it is imperative for the axial oxygen ligand to bind neither too strongly nor too weakly to the Zr atom. The coordination engineering strategy can successfully enhance the ORR activity, shifting the ORR overpotential from 0.75 V and 0.92 V to 0.33 V and 0.32 V. This study provides new insights into the origin of ORR activity by connecting the novel geometric descriptor to the electronic structure and finally it is connected to the ORR activity.

Cyclo-E5-bridged trinuclear triple-decker complexes (E = P, As) containing a triply-bonded Mo2 unit and their isomerisation

The reaction of the low-coordinate quadruply-bonded dimolybdenum complex Mo2[μ,κ2-PhB(N-2,6-iPr2C6H3)2]2 (1) with Cp*Fe(η5-E5) (E = P, As) gives two trinuclear species Cp*Fe(μ3,η5:2:2-E5)Mo2[μ,κ2-PhB(N-2,6-iPr2C6H3)2]2 (E = P (4) and As (5)). 4 undergoes facile isomerisation upon heating to give Cp*FeMo2[κ2-PhB(N-2,6-iPr2C6H3)2](μ3,κ:κ:η2-P2)[μ3,κ:κ:η3κ-P3PhB(N-2,6-iPr2C6H3)2] (6), where the FeMo2P5 core motif displays a cubane-like structure.

Synthesis and reactivity of alkali metal aluminates bearing bis(organoamido)phosphane ligand

In this study, we report a group of alkali metal aluminates bearing bis(organoamido)phosphane ligand. The starting complex {[PhP(NtBu)2]AlMe2}Li·OEt2 (1) was prepared by stepwise deprotonation of the parent PhP(NHtBu)2 by nBuLi and AlMe3. Further derivatization of aluminate 1 was performed by the virtual substitution of lithium -{[PhP(NtBu)2]AlMe2}K (2), methyl substituents - {[PhP(NtBu)2]AlH2}Li·THF (3), modification of steric bulk and induction effects on the phosphorus atom - {[tBuP(N-2,6-iPr2C6H3)2]AlMe2}Li·(OEt2)2 (4), and phosphorus atom oxidation state {[Ph(Y)P(NtBu)2]AlMe2}Li (Y = O (5), S (6), Se (7), Te (8)). The structure causing non-covalent interactions in 1-4 were evaluated with the help of theoretical calculations and topological analysis ranging from π-electron system-metal to agostic interactions of various types. The further reactions of 1 with various nucleophiles were found to be a versatile tool for the preparation of iminophosphonamides via the formation of P-E bond (E = Si, Ge, Sn, Pb, P, and C) and followed by P(III) → P(V) tautomeric shift.

About Perfluoropolyhedranes, Their Electron-Accepting Ability and Questionable Supramolecular Hosting Capacity

Polyhedral molecules are appealing for their eye-catching architecture and distinctive chemistry. Perfluorination of such, often greatly strained, compounds is a momentous challenge. It drastically changes the electron distribution, structure and properties. Notably, small high-symmetry perfluoropolyhedranes feature a centrally located, star-shaped low-energy unoccupied molecular orbital that can host an extra electron within the polyhedral frame, thus producing a radical anion, without loss of symmetry. This predicted electron-hosting capacity was definitively established for perfluorocubane, the first perfluorinated Platonic polyhedrane to be isolated pure. Hosting atoms, molecules, or ions in such "cage" structures is, however, all but forthright, if not illusionary, offering no easy access to supramolecular constructs. While adamantane and cubane have fostered numerous applications in materials science, medicine, and biology, specific uses for their perfluorinated counterparts remain to be established. Some aspects of highly fluorinated carbon allotropes, such as fullerenes and graphite, are briefly mentioned for context.

Nucleophilic Attack at Pentaarsaferrocene [Cp*Fe(η5 -As5 )]-The Way to Larger Polyarsenide Ligands

By the reaction of [Cp*Fe(η5 -As5 )] (I) (Cp*=C5 Me5 ) with main group nucleophiles, unique functionalized products with η4 -coordinated polyarsenide (Asn ) units (n=5, 6, 20) are obtained. With carbon-based nucleophiles such as MeLi or KBn (Bn=CH2 Ph), the anionic organo-substituted polyarsenide complexes, [Li(2.2.2-cryptand)][Cp*Fe(η4 -As5 Me)] (1 a) and [K(2.2.2-cryptand)][Cp*Fe{η4 -As5 (CH2 Ph)}] (1 b), are accessible. The use of KAsPh2 leads to a selective and controlled extension of the As5 unit and the formation of the monoanionic compound [K(2.2.2-cryptand][Cp*Fe(η4 -As6 Ph2 )] (2). When I is reacted with [M]As(SiMe3 )2 (M=Li ⋅ THF; K), the formation of the largest known anionic polyarsenide unit in [M'(2.2.2-cryptand)]2 [(Cp*Fe)4 {μ5 -η4 :η4 :η3 :η3 :η1 :η1 -As20 }] (3) occurred (M'=Li (3 a), K (3 b)).

Planar pentacoordinate s-block metals

The presence of a delocalized π-bond is often considered an essential criterion for achieving planar hypercoordination. Herein, we show that σ-delocalization could be sufficient to make the planar configuration the most stable isomer in a series of planar pentacoordinate s-block metals. High-level ab initio computations reveal that the global minimum of a series of interalkali and interalkali-alkaline earth clusters (LiNa5, Li5Mg+, Na5Mg+, K5Ca+, CaRb5+, Rb5Sr+, and SrCs5+) adopts a singlet D5h structure with a planar pentacoordinate lithium or alkaline earth metal (AE = Mg, Ca, Sr). These clusters are unusual combinations to stabilize a planar pentacoordinate atom, as all their constituents are electropositive. Despite the absence of π-electrons, Hückel's rule is fulfilled by the six σ-electrons. Furthermore, the systems exhibit a diatropic ring current in response to an external magnetic field and a strong magnetic shielding, so they might be classified as σ-aromatic. Therefore, multicenter σ-bonds and the resulting σ-delocalization stabilize these clusters, even though they lack π-aromaticity.

H8 [PV5 Mo7 O40 ] - A Unique Polyoxometalate for Acid and RedOx Catalysis: Synthesis, Characterization, and Modern Applications in Green Chemical Processes

Polyoxometalates (POMs) are a fascinating group of anionic metal-oxide clusters with a broad variety of structural properties and several catalytic applications, especially in the conversion of bio-derived platform chemicals. H8 [PV5 Mo7 O40 ] (HPA-5) is a unique POM catalyst that ideally links numerous fascinating research fields for the following reasons: a) HPA-5 can be synthesized by rational design approaches; b) HPA-5 can be well characterized using multiple analytical tools explaining its catalytic properties; and c) HPA-5 is suitable for multiple important catalytic transformations of bio-based feedstock. This Review combines the fields of synthesis, spectroscopic, electrochemical, and crystallographic characterization of HPA-5 with those of sustainable catalysis and green chemistry. Selected catalytic applications include esterification, dehydration, and delignification of biomass as well as selective oxidation and fractionation of bio-based feedstock. The unique HPA-5 is a fascinating POM that has a broad application scope for biomass valorization.

Pyramidanes: newcomers to the anti-van't Hoff-Le Bel family

In this feature article, an overview of the chemistry of pyramidanes, as a novel class of main group element clusters, is given. A general introduction sets the scene, briefly presenting the non-classical pyramidal geometry of tetracoordinate carbon, as opposed to the classical tetrahedral configuration. Pyramidanes, as the simplest organic compounds possessing a pyramidal carbon atom, are then discussed from both computational and experimental viewpoints, to show the theoretical predictions on the stability and thus the feasibility of pyramidanes has finally culminated in the isolation of the first stable representatives of the pyramidane family featuring heavy main group elements at the apex of the square pyramid. Synthetic strategies towards pyramidanes, as well as their peculiar structural features, non-classical bonding situations, and specific reactivity, are presented and discussed in this review.

FP(μ-N)2 S: A Sulfur-Pnictogen Four-Membered Ring with 6π Electrons

The new 6π-electron four-membered ring compound 3-fluoro-1λ2 ,2,4,3λ3 -thiadiazaphosphetidine, FP(μ-N)2 S, has been generated in the gas phase through high-vacuum flash pyrolysis (HVFP) of thiophosphoryl diazide, FP(S)(N3 )2 , at 1000 K. Subsequent isolation of FP(μ-N)2 S in cryogenic matrices (Ar, Ne, and N2 ) allows its characterization with matrix-isolation IR and UV-vis spectroscopy by combination with 15 N-isotope labeling and computations at the CCSD(T)-F12a/VTZ-F12 level of theory. Upon visible-light irradiation at 550 nm, this cyclic compound undergoes ring-opening to the thiazyl isomer FPNSN, followed by dissociation to FP and SN2 under subsequent UV-irradiation at 365 nm. In sharp contrast to the square planar structure for the isolobal four-membered ring S2 N2 , a puckered structure with significant biradical character has been found for FP(μ-N)2 S.

The DOTA macrocyclic cavity in metallic radiopharmaceuticals: Mythology or reality?

BACKGROUND

The hypothetical concept of 'macrocyclic cavity' is largely employed as useful model to interpret the affinity of metal ions for the macrocyclic chelating ligand 2,2',2'',2'''-(1,4,7,10-tetraazacyclododecane-1,4,7,10-tetrayl)tetraacetic acid (H4DOTA). It Is hypothesized that a close matching between the size of the macrocyclic cavity and that of the metallic ion is a key parameter to ensure the high-yield formation of stable coordination metal-DOTA complex. This approach has become popular in the design of radiopharmaceuticals containing radiometals and H4DOTA as chelating group.

RESULTS

Based on X-ray structural data of metallic complexes formed by the ligand H4DOTA upon coordination with a variety of metals, an elementary argument based on Euclidean geometry is presented here that questions the existence of the hypothetical 'macrocyclic cavity' within the chelator macrocycle. The geometrical analysis was applied to the complex formed by a Ga3+ ion coordinated to H4DOTA as model compound.

CONCLUSIONS

Application of Euclidean geometry to calculate bond angles in the coordination complex of the ligand H4DOTA with the Ga+3 ion, supposed to incorporate a hypothetical 'macrocyclic cavity', revealed that this conceptual entity has no physical reality and, therefore, cannot be considered a meaningful description of a stable structural arrangement for metallic radiopharmaceuticals.

Synthesis, Structure, and Spectroscopy of the Biscarboranyl Stannylenes ()Sn·THF and K2[()Sn]2 ( = 1,1'(ortho-Biscarborane)) and Dibiscarboranyl Ethene ()CH=CH()

Two compounds containing a Sn(II) atom supported by a bidentate biscarborane ligand have been synthesized via salt metathesis. The synthetic procedures for (bc)Sn·THF (bc = 1,1' (ortho-carborane) (1) and K2[(bc)Sn]2 (2) involved the reaction of K2[bc] with SnCl2 in either a THF solution (1) or in a benzene/dichloromethane solvent mixture (2). Using the same solvent conditions as those used for 2 but using a shorter reaction time gave a dibiscarboranyl ethene (3). The products were characterized by 1H, 13C, 11B, 119Sn NMR, UV-vis, and IR spectroscopy, and by X-ray crystallography. The diffraction data for 1 and 2 show that the Sn atom has a trigonal pyramid environment and is constrained by the bc ligand in a planar five-membered C4Sn heterocycle. The 119Sn NMR spectrum of 1 displays a triplet of triplets pattern signal, which is unexpected given the absence of a Sn-H signal in the 1H NMR, IR spectrum, and X-ray crystallographic data. However, a comparison with other organotin compounds featuring a Sn atom bonded to carboranes reveal similar multiplets in their 119Sn NMR spectra, likely arising from long-range nuclear spin-spin coupling between the carboranyl 11B and 119Sn nuclei. Compound 3 displays structural and spectroscopic characteristics typical of conjugated alkenes.

Controlled introduction of functional groups at one P atom in [Cp*Fe(η5-P5)] and release of functionalised phosphines

By salt metathesis reactions of the anionic complexes of the type [Cp*Fe(η⁴-P₅R)]^- (R = ^tBu (1a), Me (1b), -C[triple bond, length as m-dash]CPh (1c); Cp* = 1,2,3,4,5-pentamethylcyclopentadienyl) with organic electrophiles (XR^FG; X = halogen; R^FG = (CH₂)₃Br, (CH₂)₄Br, Me) a variety of organo-substituted polyphosphorus ligand complexes of the type [Cp*Fe(η⁴-P₅RR^FG)] (2) are obtained. Thereby, organic substituents with different functional groups (FG), such as halogens or nitriles, are introduced. In [Cp*Fe(η⁴-P₅RR')] (2a: R = ^tBu, R' = (CH₂)₃Br), the bromine substituent can be easily substituted, leading to functionalized complexes [{Cp*Fe(η⁴-P₅tBu)}(CH₂)₃{Cp*Fe(η⁴-P₅Me)}] (4) and [Cp*Fe(η⁴-P₅RR')] (5) (R = ^tBu, R' = (CH₂)₃PPh₂) or by abstraction of a phosphine to the asymmetric substituted phosphine tBu(Bn)P(CH₂)₃Bn (6). The reaction of the dianionic species [K(dme)₂]₂[Cp*Fe(η⁴-P₅)] (I') with bromo-nitriles leads to [Cp*Fe{η⁴-P₅((CH₂)₃CN)₂}] (7), allowing the introduction of two functional groups attached to one phosphorus atom. 7 reacts with ZnBr₂ in a self-assembly reaction to form the supramolecular compound [Cp*Fe{η⁴-P₅((CH₂)₃CN)₂}ZnBr₂]_n (8).

Building protein structure-specific rotamer libraries

MOTIVATION

Identifying the probable positions of the protein side-chains is one of the protein modelling steps that can improve the prediction of protein-ligand and protein-protein interactions. Most of the strategies predicting the side-chain conformations use predetermined dihedral angle lists, also called rotamer libraries, that are usually generated from a subset of high-quality protein structures. Although these methods are fast to apply, they tend to average out geometries instead of taking into account the surrounding atoms and molecules and ignore structures not included in the selected subset. Such simplifications can result in inaccuracies when predicting possible side-chain atom positions.

RESULTS

We propose an approach that takes into account both of these circumstances by scanning through sterically accessible side-chain conformations and generating dihedral angle libraries specific to the target proteins. The method avoids the drawbacks of lacking conformations due to unusual or rare protein structures and successfully suggests potential rotamers with average RMSD closer to the experimentally determined side-chain atom positions than other widely used rotamer libraries.

AVAILABILITY AND IMPLEMENTATION

The technique is implemented in open-source software package rotag and available at GitHub: https://www.github.com/agrybauskas/rotag, under GNU Lesser General Public License.

Rearrangement of a Ge(II) aryloxide to yield a new Ge(II) oxo-cluster [Ge6(μ3-O)4(μ2-OC6H2-2,4,6-Cy3)4](NH3)0.5: main group aryloxides of Ge(II), Sn(II), and Pb(II) [M(OC6H2-2,4,6-Cy3)2]2 (Cy = cyclohexyl)

The new Ge(II) cluster [Ge₆(μ₃-O)₄(μ₂-OC₆H₂-2,4,6-Cy₃)₄](NH₃)_0.5 (1) and three divalent Group 14 aryloxide derivatives [Ge(OC₆H₂-2,4,6-Cy₃)₂]₂ (2), [Sn(OC₆H₂-2,4,6-Cy₃)₂]₂ (3), and [Pb(OC₆H₂-2,4,6-Cy₃)₂]₂ (4) of the new tricyclohexylphenyloxo ligand, [(-OC₆H₂-2,4,6-Cy₃)₂]₂ (Cy = cyclohexyl), were synthesized and characterized. Complexes 1-4 were obtained by reaction of the metal bissilylamides M(N(SiMe₃)₂)₂ (M = Ge, Sn, Pb) with 2,4,6-tricyclohexylphenol in hexane at room temperature. If the freshly generated reaction mixture for the synthesis of 2 is stirred in solution for 12 h at room temperature, the cluster [Ge₆(μ₃-O)₄(μ₂-OC₆H₂-2,4,6-Cy₃)₄](NH₃)_0.5 (1), which features a rare Ge₆O₈ core that includes ammonia molecules in non-coordinating positions, is formed. Complexes 3 and 4 were also characterized via¹¹⁹Sn{¹H} NMR and ²⁰⁷Pb NMR spectroscopy and feature signals at -280.3 ppm (¹¹⁹Sn{¹H}, 25 °C) and 1541.0 ppm (²⁰⁷Pb, 37 °C), respectively. The spectroscopic characterization of 3 and 4 extends known ¹¹⁹Sn parameters for dimeric Sn(II) aryloxides, but data for ²⁰⁷Pb NMR spectra for Pb(II) aryloxides are rare. We present also a rare VT-NMR study of a homoleptic 3-coordinate Pb(II) aryloxide. The crystal structures of 2, 3, and 4 feature interligand H⋯H contacts that are similar in number to those of related transition metal derivatives despite the larger size of the group 14 elements.

Gas-phase formation of Grignard-type organolanthanide (III) ions RLnCl3 - : The influences of lanthanide center and hydrocarbyl group

RATIONALE

Compared with organomagnesium compounds (Grignard reagents), the Grignard-type organolanthanides (III) exhibit several utilizable differences in reactivity. However, the fundamental understanding of Grignard-type organolanthanides (III) is still in its infancy. Decarboxylation of metal carboxylate ions is an effective method to obtain organometallic ions that are well suited for gas-phase investigation using electrospray ionization (ESI) mass spectrometry in combination with density functional theory (DFT) calculations.

METHODS

The (RCO₂ )LnCl₃ ^- (R = CH₃ , Ln = La-Lu except Pm; Ln = La, R = CH₃ CH₂ , CH₂ CH, HCC, C₆ H₅ , and C₆ H₁₁ ) precursor ions were produced in the gas phase via ESI of LnCl₃ and RCO₂ H or RCO₂ Na mixtures in methanol. Collision-induced dissociation (CID) was employed to examine whether the Grignard-type organolanthanide (III) ions RLnCl₃ ^- can be obtained via decarboxylation of lanthanide chloride carboxylate ions (RCO₂ )LnCl₃ ^- . DFT calculations can be used to determine the influences of lanthanide center and hydrocarbyl group on the formation of RLnCl₃ ^- .

RESULTS

When R = CH₃ , CID of (CH₃ CO₂ )LnCl₃ ^- (Ln = La-Lu except Pm) yielded decarboxylation products (CH₃ )LnCl₃ ^- and reduction products LnCl₃ ·^- with a variation in the relative intensity ratio of (CH₃ )LnCl₃ ^- /LnCl₃ ·^- . The trend is as follows: (CH₃ )EuCl₃ ^- /EuCl₃ ·^-  < (CH₃ )YbCl₃ ^- /YbCl₃ ·^-  ≈ (CH₃ )SmCl₃ ^- /SmCl₃ ·^-  < other (CH₃ )LnCl₃ ^- /LnCl₃ ·^- , which complies with the trend of Ln (III)/Ln (II) reduction potentials in general. When Ln = La and hydrocarbyl groups were varied as CH₃ CH₂ , CH₂ CH, HCC, C₆ H₅ , and C₆ H₁₁ , the fragmentation behaviors of these (RCO₂ )LaCl₃ ^- precursor ions were diverse. Except for (C₆ H₁₁ CO₂ )LaCl₃ ^- , the four remaining (RCO₂ )LaCl₃ ^- (R = CH₃ CH₂ , CH₂ CH, HCC, and C₆ H₅ ) ions all underwent decarboxylation to yield RLaCl₃ ^- . (CH₂ CH)LaCl₃ ^- and especially (CH₃ CH₂ )LaCl₃ ^- are prone to undergo β-hydride transfer to form LaHCl₃ ^- , whereas (HCC)LaCl₃ ^- and (C₆ H₅ )LaCl₃ ^- are not. A minor reduction product, LaCl₃ ·^- , was formed via C₆ H₅ radical loss of (C₆ H₅ )LaCl₃ ^- . The relative intensities of RLaCl₃ ^- compared to (RCO₂ )LaCl₃ ^- decrease as follows: HCC > CH₂ CH > C₆ H₅  > CH₃  > CH₃ CH₂  >> C₆ H₁₁ (not visible).

CONCLUSION

A series of Grignard-type organolanthanide (III) ions RLnCl₃ ^- (R = CH₃ , Ln = La-Lu except Pm; Ln = La, R = CH₃ CH₂ , CH₂ CH, HCC, and C₆ H₅ ) were produced from (RCO₂ )LnCl₃ ^- via CO₂ loss, whereas (C₆ H₁₁ )LaCl₃ ^- did not. The experimental and theoretical results suggest that the reduction potentials of Ln (III)/Ln (II) couples as well as the bulkiness and hybridization of hydrocarbyl groups play important roles in promoting or limiting the formation of RLnCl₃ ^- via decarboxylation of (RCO₂ )LnCl₃ ^- .

A Combined Synthetic, Magnetic, and Theoretical Study on Enhancing Ligand-Field Axiality for Dy(III) Single-Molecule Magnets Supported by Ferrocene Diamide Ligands

Molecular design is crucial for improving the performance of single-molecule magnets (SMMs). For dysprosium(III) SMMs, enhancing ligand-field axiality is a well-suited strategy to achieve high-performance SMMs. We synthesized a series of dysprosium(III) complexes, (NN^TIPS)DyBr(THF)₂ (1, NN^TIPS = fc(NSiⁱPr₃)₂; fc = 1,1'-ferrocenediyl, THF = tetrahydrofuran), [(NN^TIPS)Dy(THF)₃][BPh₄] (2), (NN^TIPS)DyI(THF)₂ (3), and [(NN^TBS)Dy(THF)₃][BPh₄] (4, NN^TBS = fc(NSi^tBuMe₂)₂), supported by ferrocene diamide ligands. X-ray crystallography shows that the rigid ferrocene backbone enforces a nearly axial ligand field with weakly coordinating equatorial ligands. Dysprosium(III) complexes 1-4 all exhibit slow magnetic relaxation under zero fields and possess high effective barriers (U_eff) around 1000 K, comparable to previously reported (NN^TBS)DyI(THF)₂ (5). We probed the influences of structural variations on SMM behaviors by theoretical calculations and found that the distribution of negative charges defined by r_q, i.e., the ratio of the charges on the axial ligands to the charges on the equatorial ligands, plays a decisive role. Moreover, theoretical calculations on a series of model complexes 1'-5' without equatorial ligands unveil that the axial crystal-field parameters B₂⁰ are directly proportional to the N-Dy-N angles and support the hypothesis that enhancing the ligand-field axiality could improve SMM performance.

Adsorption and sensing mechanisms of Ni-doped PtTe2 monolayer upon NO2 and O3 in air-insulated switchgears

Under partial discharge, air would be converted into O₃ and NO₂ in air-insulated switchgears, therefore, the detection of such two gases can be used to evaluate the operation status of such electrical equipment. In this study, first-principles simulations are implemented to investigate the Ni-doping behavior on the pristine PtTe₂ monolayer, and the adsorption and sensing performances of the Ni-doped PtTe₂ (Ni-PtTe₂) monolayer upon O₃ and NO₂ in air-insulated switchgears. The formation energy (E_form) of Ni-doping on the PtTe₂ surface was calculated to be -0.55 eV, which indicates the exothermicity and spontaneity of the Ni-doping process. Strong interactions occurred in the O₃ and NO₂ systems given the significant adsorption energy (E_ad) of -2.44 and -1.93 eV, respectively. Using the band structure and frontier molecular orbital analysis, the sensing response of the Ni-PtTe₂ monolayer upon such two gas species is quite close and large enough for gas detections. Combined with the extremely long recovery time for gas desorption, it is presumed that the Ni-PtTe₂ monolayer is a promising one-shot gas sensor for O₃ and NO₂ detection with a strong sensing response. This study aims at proposing a novel and promising gas sensing material for the detection of the typical fault gases in air-insulated switchgears, so as to ensure their good operation in the whole power system.

Synthesis and isolation of a triplet bismuthinidene with a quenched magnetic response

Large Spin-Orbit Coupling (SOC) is an intrinsic property of the heavy-elements that directly affects the electronic structures of the compounds. Herein we report the synthesis and characterization of a mono-coordinate bismuthinidene featuring a rigid and bulky ligand. All magnetic measurements (SQUID, NMR) point to a diamagnetic compound. However, multiconfigurational quantum chemical calculations predict the ground state of the compound to be dominated (76%) by a spin-triplet. The apparent diamagnetism is explained by an extremely large SOC induced positive zero-field-splitting of more than 4500 cm^-1 that leaves the M_S = 0 magnetic sublevel thermally isolated in the electronic ground state.

Disproportionation of Sn(II){CH(SiMe3)2}2 to ˙Sn(III){CH(SiMe3)2}3 and ˙Sn(I){CH(SiMe3)2}: characterization of the Sn(I) product

Half a century after the photolytic disproportionation of Lappert's dialkyl stannylene SnR₂, R = CH(SiMe₃)₂ (1) gave the persistent trivalent radical [˙SnR₃], the characterization of the corresponding Sn(I) product, ˙SnR is now described. It was isolated as the hexastannaprismane Sn₆R₆ (2), from the reduction of 1 by the Mg(I)-reagent, Mg(BDI^Dip)₂ (BDI = (DipNCMe)₂CH, Dip = 2,6-diisopropylphenyl).

Ni3InSb: Synthesis, Crystal Structure, Electronic Structure, and Magnetic Properties

The ternary phase with the composition Ni₃InSb has been synthesized by high-temperature synthesis and structurally characterized by a combination of X-ray analysis, neutron diffraction analysis, and theoretical calculations. The structure of Ni₃InSb crystallizes in the orthorhombic space group Pnma with lattice constants a = 7.111(3) Å, b = 5.193(3) Å, and c = 8.2113(2) Å. The crystal structure contains ∼20 atoms in its unit cell, which are distributed over four crystallographically independent positions (two Ni, one In, and one Sb). The crystal structure can be considered as a ternary substitutional variant of Ni₃Sn₂ (Pnma, no. 62), where a trivalent In and a pentavalent Sb orderly occupy two tetravalent Sn sites of Ni₃Sn₂. This site decoration pattern of two neighboring elements, In and Sb, is unique and confirmed by first principles total energy calculations. The crystal structure can be described by two building units: Ni₂Sb (building unit of Ni₂In) and NiIn (NiAs-type). They alternate in the crystal structure and form infinite ac-slabs (puckered), and the slabs are stacked along [010]. A triangular lattice formed by Ni atoms indicates the existence of a geometrically frustrated structure. The calculated density of states and crystal orbital Hamilton population enlighten the stability and bonding characteristics of the structure. The temperature-dependent neutron diffraction study down to 5 K reveals that the crystal structure remains in the same orthorhombic symmetry with a weak anomaly in the lattice parameters at ∼100 K. Detailed temperature- and magnetic field-dependent magnetic properties of the title phase Ni₃InSb show spin-glass- or spin-disorder-like behaviors below ∼300 K with an unusual magnetic behavior below 100 K, where an enhancement of magnetization with a decrease of the coercive field has been found.

Machine Learning-Aided Band Gap Engineering of BaZrS3 Chalcogenide Perovskite

The non-toxic and stable chalcogenide perovskite BaZrS₃ fulfills many key optoelectronic properties for a high-efficiency photovoltaic material. It has been shown to possess a direct band gap with a large absorption coefficient and good carrier mobility values. With a reported band gap of 1.7-1.8 eV, BaZrS₃ is a good candidate for tandem solar cell materials; however, its band gap is significantly larger than the optimal value for a high-efficiency single-junction solar cell (∼1.3 eV, Shockley-Queisser limit)─thus doping is required to lower the band gap. By combining first-principles calculations and machine learning algorithms, we are able to identify and predict the best dopants for the BaZrS₃ perovskites for potential future photovoltaic devices with a band gap within the Shockley-Queisser limit. It is found that the Ca dopant at the Ba site or Ti dopant at the Zr site is the best candidate dopant. Based on this information, we report for the first time partial doping at the Ba site in BaZrS₃ with Ca (i.e., Ba_1-xCa_xZrS₃) and compare its photoluminescence with Ti-doped perovskites [i.e., Ba(Zr_1-xTi_x)S₃]. Synthesized (Ba,Ca)ZrS₃ perovskites show a reduction in the band gap from ∼1.75 to ∼1.26 eV with <2 atom % Ca doping. Our results indicate that for the purpose of band gap tuning for photovoltaic applications, Ca-doping at the Ba-site is superior to Ti-doping at the Zr-site reported previously.

On the Edge of the Known: Extremely Electron-Rich (Di)Carboranyl Phosphines

The syntheses of the first B9-connected carboranylphosphines (B9-Phos) featuring two carboranyl moieties as well as access to B9-Phos ligands with bulky electron-donating substituents, previously deemed unattainable, is reported. The electrochemical properties of the B9-Phos ligands were investigated, revealing the ability of the mesityl derivatives to form stabilized phosphoniumyl radical cations. The B9-Phos ligands display an extremely electron-releasing character surpassing that of alkyl phosphines and commonly used N-heterocyclic carbenes. This is demonstrated by their very small Tolman electronic parameters (TEPs) as well as extremely low P-Se coupling constants. Cone angles and buried volumes attest to the high steric demand exerted by the (di)carboranyl phosphines. The dicarboranyl phosphine Au^I complexes show superior catalytic performance in the hydroamination of alkynes compared to the monocarboranyl phosphine analogs.

Fluorinated Dihydropentalene-1,4-Dione: A Strong Electron-Accepting Unit with Organic Semiconductor Characteristics

The development of electron-accepting units is of significant importance because the construction of donor (D)-acceptor (A) configurations is an effective strategy for tuning the electronic properties of π-conjugated systems. Although doubly fused pentagons represented by diketopyrrolopyrrole (DPP) have been used as an effective electron-accepting unit, the relatively high-lying frontier molecular orbital levels (FMOs) leave room for further improvement. We report herein the synthesis of a fluorinated dihydropentalene-1,4-dione (FPD) derivative as a strong electron-accepting unit and the development of D-A-D π-extended molecules. X-ray analyses revealed that the presence of fluorine atoms contributed to the formation of high planar structures and slipped-stacked packing. Electrochemical measurements indicated that the FPD derivatives showed relatively lower FMO energy levels than the corresponding DPP-containing derivatives. The D-A-D molecule based on terthiophene and FPD showed semiconducting responses. This study demonstrates that the FPD unit can function as a new acceptor unit for organic semiconductors.

Highly Adaptive Nature of Group 15 Tris(quinolyl) Ligands─Studies with Coinage Metals

The substitution of heavier, more metallic atoms into classical organic ligand frameworks provides an important strategy for tuning ligand properties, such as ligand bite and donor character, and is the basis for the emerging area of main-group supramolecular chemistry. In this paper, we explore two new ligands [E(2-Me-8-qy)₃] [E = Sb (1), Bi (2); qy = quinolyl], allowing a fundamental comparison of their coordination behavior with classical tris(2-pyridyl) ligands of the type [E'(2-py)₃] (E = a range of bridgehead atoms and groups, py = pyridyl). A range of new coordination modes to Cu⁺, Ag⁺, and Au⁺ is seen for 1 and 2, in the absence of steric constraints at the bridgehead and with their more remote N-donor atoms. A particular feature is the adaptive nature of these new ligands, with the ability to adjust coordination mode in response to the hard-soft character of coordinated metal ions, influenced also by the character of the bridgehead atom (Sb or Bi). These features can be seen in a comparison between [Cu₂{Sb(2-Me-8-qy)₃}₂](PF₆)₂ (1·CuPF₆) and [Cu{Bi(2-Me-8-qy)₃}](PF₆) (2·CuPF₆), the first containing a dimeric cation in which 1 adopts an unprecedented intramolecular N,N,Sb-coordination mode while in the second, 2 adopts an unusual N,N,(π-)C coordination mode. In contrast, the previously reported analogous ligands [E(6-Me-2-py)₃] (E = Sb, Bi; 2-py = 2-pyridyl) show a tris-chelating mode in their complexes with CuPF₆, which is typical for the extensive tris(2-pyridyl) family with a range of metals. The greater polarity of the Bi-C bond in 2 results in ligand transfer reactions with Au(I). Although this reactivity is not in itself unusual, the characterization of several products by single-crystal X-ray diffraction provides snapshots of the ligand transfer reaction involved, with one of the products (the bimetallic complex [(BiCl){ClAu₂(2-Me-8-qy)₃}] (8)) containing a Au₂Bi core in which the shortest Au → Bi donor-acceptor bond to date is observed.

Coinage metal amido and thiolate SNS complexes: consequences of catalyst speciation in Cu(I)-catalysed carbonyl hydroboration

Three new IPr-Ag- and -Au-SNS amido and thiolate complexes were synthesized and compared to their previously reported Cu analogues as carbonyl hydroboration catalysts (IPr = bis(2,6-diisopropylphenyl)imidazol-2-ylidene). Although these complexes showed no catalytic activity, treatment of the IPr-Ag-SNS amido complex with pinacolborane released the N-borylated ligand, S^MeN^BpinS^Me, (L1-Bpin). This finding led us to reinvestigate the IPr-Cu-SNS amido precatalyst, revealing that immediate loss of L1-Bpin converts our catalyst system to [CuH(IPr)]₂.

Monosubstituted Doublet Sn(I) Radical Featuring Substantial Unquenched Orbital Angular Momentum

Due to their intrinsic high reactivity, isolation of heavier analogues of carbynes remains a great challenge. Here, we report the synthesis and characterization of a neutral monosubstituted Sn(I) radical (2) supported by a sterically hindered hydrindacene ligand, which represents the first tin analogue of a free carbyne. Different from all Sn(I/III) species reported thus far, the presence of a sole Sn-C σ bond in 2 renders the remaining two Sn 5p orbitals energetically almost degenerate, of which one is singly occupied and the other is empty. Consequently, its S = 1/2 ground state possesses two-fold orbital pseudo-degeneracy and substantial unquenched orbital angular momentum, as evidenced by one component of its g matrix (1.957, 1.896, and 1.578) being considerably less than 2. Consistent with this unique electronic structure, 2 can bind to an N-heterocyclic carbene to afford a neutral two-coordinate Sn(I) radical and initiate a one-electron transfer to benzophenone to furnish a Sn(II)-ketyl radical anion adduct. As a manifestation of its Sn-centered radical nature, 2 reacts with diphenyl diselenide and p-benzoquinone to form Sn-S and Sn-O bonds, respectively.

A theoretical study of M-M' polar-covalent bonding in heterobimetallic multinuclear organometallic complexes of monovalent group 11 metal centres

Complexes with closed-shell (d¹⁰-d¹⁰) interactions have been studied for their interesting luminescence properties in organic light-emitting diode (OLED) devices. The present computational study aims at understanding the chemical bonding/interactions in a series of molecules with unusually short metal-metal bond distances between monovalent coinage-metal (d¹⁰-d¹⁰) centres. The investigated molecules include pentanuclear complexes with M or M' = Cu(I), Ag(I), or Au(I) and Mes = 2,4,6-Me₃C₆H₂. In such complexes, the M-M' distances are up to 50-100 pm shorter than typical metallophilic bonds in homometallic analogues. Characterization and analysis of the chemical bond strength was performed using ab initio methods, density functional theory methods including a semi-empirical treatment of dispersion interactions (DFT-D3) and semi-empirical calculations at the extended Hückel theory (EHT) level. Population analysis suggests that hybridization occurs by mixing the (n + 1)s and (n + 1)p orbitals of M with the (nd) orbitals of M'. The orbital mixing plays a pivotal role in the polydentated polar-covalency/dative M-M' bonds that distinguish this bonding from the weaker metallophilic interactions.

Mg(I)-Fe(-II) and Mg(0)-Mg(I) covalent bonding in the MgnFe(CO)4- (n = 1, 2) anion complexes: an infrared photodissociation spectroscopic and theoretical study

Heteronuclear magnesium-iron carbonyl anion complexes MgFe(CO)₄^- and Mg₂Fe(CO)₄^- are produced in the gas phase and are detected by mass-selected infrared photodissociation spectroscopy in the carbonyl stretching frequency region. The geometric structures and the metal-metal bonding are discussed with the aid of quantum chemical calculations. Both complexes are characterized to have a doublet electronic ground state with C_3v symmetry containing a Mg-Fe bond or a Mg-Mg-Fe bonding unit. Bonding analyses indicate that each complex involves an electron-sharing Mg(I)-Fe(-II) σ bond. The Mg₂Fe(CO)₄^- complex involves a relatively weak covalent Mg(0)-Mg(I) σ bond.

Triel Bonds with Au Atoms as Electron Donors

The novel triel bonds of BX₃ (X=H, F, Cl, Br, and I) and C₅ H₅ B as electron acceptors and AuR₂ (R=Cl and CH₃ ) as an electron donor were explored. The triel bond is a primary driving force for most complexes, while the contribution from a halogen-chlorine interaction in BX₃ -AuCl₂ (X=Cl, Br, and I) and an iodine-Au interaction in BI₃ -Au(CH₃ )₃ is also very important. Interestingly, the positively charged Au atom of AuCl₂ can attractively bind with the holes of BX₃ and C₅ H₅ B. The interaction energy lies in the range of 1 and 80 kcal/mol, in the order X=F<H<Cl<Br<I. In most cases, the triel bond of C₅ H₅ B is stronger than the triel bond of BX₃ . In the formation of B-Au triel bond, electrostatic energy is not dominant, while polarization energy including orbital interaction has the largest contribution for the strongly bonded complexes and dispersion energy for the weak triel bond.

Five-membered N-heterocyclic beryllium(I) compounds: fluctuating electronic structures with ambiphilic reactivity

The structure, bonding, and reactivity of the five-membered N-heterocyclic beryllium compounds (NHBe), BeN₂C₂H₄ (1) and BeN₂(CH₃)₂C₂H₂ (2) were studied at the M06/def2-TZVPP//BP86/def2-TZVPP level of theory. The molecular orbital analysis indicates that NHBe is an aromatic 6π-electron system with an unoccupied σ-type spⁿ-hybrid orbital on Be. Energy decomposition analysis combined with natural orbitals for chemical valence has been carried out with Be and L (L = N₂C₂H₄ (1), N₂(CH₃)₂C₂H₂ (2)) in their different electronic states as fragments at the BP86/TZ2P level of theory. The results indicate that the best bonding representation can be considered as an interaction between Be⁺ having the 2s⁰2p_x¹2p_y⁰2p_z⁰ electronic configuration and L^-. Accordingly, L^- forms two donor-acceptor σ-bonds and one electron sharing π-bond with Be⁺. Compounds 1 and 2 show high proton and hydride affinity at beryllium, indicating its ambiphilic reactivity. The protonated structure results from adding a proton on the lone pair of electrons in the doubly excited state. On the other hand, the hydride adduct is formed by donating electrons from the hydride to an unoccupied σ-type spⁿ-hybrid orbital on Be. These compounds show very high exothermic reaction energy for adduct formation with two electron donor ligands such as cAAC, CO, NHC, and PMe₃.

Reactivity of triphosphinoboranes towards H3B·SMe2: access to derivatives of boraphosphacycloalkanes with diverse substituents

Triphosphinoboranes activated the B-H bond in the BH₃ molecule without any catalysts at room temperature. Hydroboration reactions led to boraphosphacyloalkanes with diverse structures. The outcomes of reactions depend on the size of the phosphanyl substituent on the boron atom of the parent triphosphinoborane, where derivatives of boraphosphacyclobutane and boraphosphacyclohexane were obtained. Furthermore, the precursor of triphosphinoboranes, namely bromodiphosphinoborane, also exhibited high reactivity towards H₃B·SMe₂, yielding bromo-substituted boraphosphacyclobutane. The obtained products were characterized by heteronuclear NMR spectroscopy, single crystal X-ray diffraction, and elemental analysis.

Structure and bonding patterns in heterometallic organometallics with linear Ln-Pd-Ln motifs

Complexes with short intermetallic distances between transition metal fragments and lanthanide (Ln) fragments are fascinating objects of study, owing to the ambiguity of the nature of the interaction. The addition of the divalent lanthanide fragments Cp*₂Ln(OEt₂) (Ln = Sm or Yb) to a Pd(ii) complex bearing the deprotonated form of the redox-active, non-symmetrical ligand, 2-pyrimidin-2-yl-1H-benzimidazole (Hbimpm), leads to two isostructural complexes, of the general formula (Cp*₂Ln)₂[μ-Pd(pyridyl)₂] (Ln = Sm (4) and Yb (5)). These adducts have interesting features, such as unique linear Ln-Pd-Ln arrangements and short Ln-Pd distances, which deviate from the expected lanthanide contraction. A mixed computational and spectroscopic study into the formation of these adducts gathers important clues as to their formation. At the same time, thorough characterization of these complexes establishes the +3 oxidation state of all the involved Ln centers. Detailed theoretical computations demonstrate that the apparent deviation from lanthanide contraction is not due to any difference in the intermetallic interaction between the Pd and the Ln, but that the fragments are joined together by electrostatic interactions and dispersive forces. This conclusion contrasts with the findings about a third complex, Cp*₂Yb(μ-Me)₂PdCp* (6), formed during the reaction, which also possesses a short Yb-Pd distance. Studies at the CASSCF level of theory on this complex show several orbitals containing significant interactions between the 4f and 4d manifolds of the metals. This demonstrates the need for methodical and careful analyses in gauging the intermetallic interaction and the inadequacy of empirical metrics in describing such phenomena.

Metal-Mediated Oligomerization Reactions of the Cyaphide Anion

The cyaphide anion, CP- , is shown to undergo three distinct oligomerization reactions in the coordination sphere of metals. Reductive coupling of Au(IDipp)(CP) (IDipp=1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) by Sm(Cp*)2 (OEt2 ) (Cp*=1,2,3,4,5-pentamethylcyclopentadienyl), was found to afford a tetra-metallic complex containing a 2,3-diphosphabutadiene-1,1,4,4-tetraide fragment. By contrast, non-reductive dimerization of Ni(SIDipp)(Cp)(CP) (SIDipp=1,3-bis(2,6-diisopropylphenyl)-imidazolidin-2-ylidene; Cp=cyclopentadienyl), gives rise to an asymmetric bimetallic complex containing a 1,3-diphosphacyclobutadiene-2,4-diide moiety. Spontaneous trimerization of Sc(Cp*)2 (CP) results in the formation of a trimetallic complex containing a 1,3,5-triphosphabenzene-2,4,6-triide fragment. These transformations show that while cyaphido transition metal complexes can be readily accessed using metathesis reactions, many such species are unstable to further oligomerization processes.

Bis(acyl)phosphide - Ambidentate Ligands for the Synthesis of Group 14 and 15 Main Group Element Compounds

The reactivity of the bis(acyl)phosphide ion [P(COR)₂ ]^- (BAP^- , R=Ph, Mes) with silicon halides SiX₄ (X=Cl, Br) and pnictogen chlorides ECl₃ (E=As, Sb and Bi) was investigated. The reaction with SiX₄ leads to the hexacoordinate silanes SiX₂ (BAP)₂ in which BAP^- is coordinated in the chelating κ² -O,O' mode, analogously to acac^- . Unexpectedly, the coordination behaviour of BAP^- differs from the one of acac^- in the interpnictogen compounds E(BAP)₃ (E=As, Sb) in which the formation of E-P bonds is favoured over κ² -O,O' chelation via the oxygen centres. Finally, the reaction of BiCl₃ with three equivalents of Na(BAP) leads to the formation of red, crystalline Bi₂ (BAP)₄ , an air stable dibismuthine, as product of a redox reaction.

Prediction of donor-acceptor-type novel noble gas complexes in the triplet electronic state

Closed-shell noble gas (Ng) compounds in the singlet electronic state have been extensively studied in the past two decades after the revolutionary discovery of ¹HArF molecule. Motivated by the experimental identification of very strong donor-acceptor-type singlet-state Ng complex ¹ArOH⁺, in the present article, for the first time, we report new donor-acceptor-type noble gas complexes in the triplet electronic state (³NgBeN⁺ (Ng = He-Rn)), where most of the Ng-Be bond lengths are smaller than the corresponding covalent limits. The newly proposed complexes are predicted to be stable by various computational tools, including coupled-cluster and multireference-based methods, with strong Ng-Be bonding (40.4-196.2 kJ mol^-1). We have also investigated ³NgBeP⁺ (Ng = He-Rn) complexes for the purpose of comparison. Various computational results, including the structural parameters, bonding energies, vibrational frequencies, and atoms-in-molecule properties suggest that it may be possible to prepare and characterize these triplet state complexes through suitable experimental technique(s).

Tin(II) cations stabilized by non-symmetric N,N',O-chelating ligands: synthesis and stability

A series of novel non-symmetric neutral N,N',O-chelating ligands derived from the α-iminopyridine 2-(C(R¹)N(C₆H₃-2,6-iPr₂))-6-(R²R³PO)C₅H₃N (L1: R¹ = H, R² = R³ = Ph; L2: R¹ = Me, R² = R³ = Ph; L3: R¹ = H; R² = Ph, R³ = EtO; L4: R¹ = Me, R² = Ph, R³ = EtO; L5: R¹ = H, R² = R³ = iPrO; L6: R1 = Me, R² = R³ = iPrO) were synthesized. Ligands L1-6 were reacted with SnCl₂ and Sn(OTf)₂ with the aim of studying the influence of different R²R³PO functional groups on the Lewis base mediated ionization of SnCl₂ and Sn(OTf)₂. While all ligands L1-6 provided the corresponding ionic tin(II) complexes [L1-6 → SnCl]⁺[SnCl₃]^- (1-6), only ligands L1, L4 and L6 were able to stabilize tin(II) dications [L1,4,6 → Sn(H₂O)][OTf]₂ (7-9). The auto-ionized compounds [L3-6 → SnCl]⁺[SnCl₃]^- possessing ethylphenyl phosphinate and diisopropylphosphite substituents undergo elimination of EtCl and iPrCl, respectively, yielding compounds 10-13. These can either be interpreted as neutral tin(II)phosphinate chloride (10, 11) and tin(II)phosphonate chloride (12, 13), respectively, containing Sn-O and Sn-Cl bonds, and a PO → SnCl₂ interaction, or as zwitterionic compounds, where the positive charge of the central tin atom is compensated by an [OSnCl₂]^- anion. Finally, DFT studies were performed to better understand the steric and electronic properties of the ligands L1-6 as well as the nature of the bonds in the resulting products, with a particular focus on complexes 10-13.

Different Doping of VSe2 Monolayers as Adsorbent and Gas Sensing Material for Scavenging and Detecting SF6 Decomposed Species

The application of intrinsic and transition metals (TM)-doped VSe₂ monolayers for the detection of faulty gases in SF₆ electrical insulated equipment is investigated based on first-principles calculations. The electron density difference, density of state, and adsorption energy are analyzed to further clarify the reaction mechanism. The results show that the intrinsic VSe₂ monolayer has weak adsorption performance for SO₂ and SOF₂ molecules, but the adsorption properties of the system are significantly improved after doping TM atoms. Among them, the TM-doped VSe₂ monolayer has better sensing performance for SO₂ than for SOF₂ molecules. Furthermore, the modulating effect of biaxial strain on the gas-sensitive properties of TM-doped VSe₂ system is also analyzed. Finally, the recovery time of the gas molecules on the solid adsorbent is evaluated. The results confirm that the TM-doped VSe₂ monolayer can be used as a novel sensing material or scavenger to ensure the normal operation of SF₆ electrical insulated equipment. This will provide a prospective insight for experimenters to implement VSe₂-based sensing materials or scavengers.