Development of bioactive fish gelatin/chitosan nanoparticles composite films with antimicrobial properties

Antimicrobial-loaded nanocarriers for food packaging applications

Increasing the demands of consumers for organic and safer foods has led to applying new technologies for food preservation. Active packaging (AP) containing natural antimicrobial agents is a good candidate for promoting the shelf life of food products. The efficiency of AP has been enhanced through nanoencapsulation methods, in which antimicrobial-loaded nanocarriers could provide a controlled release of antimicrobial active packaging for keeping the quality of foods during storage. The main objective of this review is to introduce common methods for designing novel encapsulation delivery systems offering controlled release of antimicrobials in the AP systems. The common nanocarriers for enveloping antimicrobial agents are described and the current state of art in the application of nanoencapsulated antimicrobials in development of antimicrobial APs have been summarized and tabulated. Incorporation of a carrier loaded with natural antimicrobial agents is the most effective method for developing AP in the food packaging sector which has become possible by using nanoencapsulated antimicrobials in films or coating structures, instead of using their free form. Nanoencapsulation approaches provide many advantages including protection against environmental stresses, release control, and improving the solubility and absorption of natural antimicrobials in AP, which are the main achievements overcoming the barriers for using natural antimicrobials in food packaging.

Characteristics and Antimicrobial Properties of Active Edible Films Based on Pectin and Nanochitosan

This study was aimed at creating new films and determine some functional packaging properties of pectin:nanochitosan films with ratios of pectin:nanochitosan (P:NSC) of 100:0; 75:25; 50:50; 25:75 and 0:100 (%w/w). The effects of the proportions of pectin:nanochitosan incorporation on the thickness, mechanical properties, water vapor permeability, water-solubility, and oxygen permeability were investigated. The microstructural studies were done using scanning electron microscopy (SEM). The interactions between pectin and nanochitosan were elucidated by Attenuated total reflectance-Fourier transform infrared (ATR-FTIR). The results showed that the blending of pectin with nanochitosan at proportions of 50:50 increased the tensile strength to 8.96 MPa, reduced the water solubility to 37.5%, water vapor permeability to 0.2052 g·mm/m²·day·kPa, and the oxygen permeability to 47.67 cc·mm/m²·day. The results of the contact angle test indicated that P:NCS films were hydrophobic, especially, pectin:nanochitosan films inhibited the growth of Colletotrichum gloeosporioides, Saccharomyces cerevisiae, Aspergillus niger, and Escherichia coli. So, P:NCS films with a proportion of 50:50 can be used as active films to extend the shelf life of food.

Design of Bioinspired Emulsified Composite European Eel Gelatin and Protein Isolate-Based Food Packaging Film: Thermal, Microstructural, Mechanical, and Biological Features

The study focused on the elaboration and the characterization of blend biofilms based on European eel skin gelatin (ESG) and protein isolate (EPI) and the assessment of European oil (EO) incorporation effect on their properties. Data displayed that the incorporation of EPI and EO to the gelatin formulation decreased the lightness and yellowness of composite and emulsified films, respectively, compared to ESG film. Moreover, ESG films exhibited improved mechanical properties than EPI films. FTIR analysis, all incorporated films with EO at the ratio 1:4 (oil/polymer) revealed similar characteristic bands as in free-oil films. Further, the SEM images of 100% ESG and 100% EPI films showed a smooth and homogenous structure, whereas the cross-section of blend film (at a ratio 50:50) displayed a rougher microstructure. In addition, emulsified film ESG100 revealed a smooth and homogeneous microstructure compared to that prepared using EPI/ESG 50/50 ratio. Furthermore, EPI or EO addition into the ESG matrix enhanced the blend films antioxidant activities.

Effect of high-intensity ultrasound treatment in combination with transglutaminase and nanoparticles on structural, mechanical, and physicochemical properties of quinoa proteins/chitosan edible films

The effect of high-intensity ultrasound (US) combined with transglutaminase treatment (TG) and the inclusion of nanoparticles (Np) on the structural, mechanical, barrier, and physicochemical properties of quinoa protein/chitosan composite edible films were evaluated. Structurally it was observed that the maximum temperatures of the thermal degradation increased with the use of combined US and TG treatment, generating films with superior thermal stability. FTIR results showed that in the amide zone I oscillations of the polypeptide structure were related to the stretching vibrations of CO in the US/TG-Np edible film. Which has generally been associated with changes in the structure and formation of covalent bonds by the action of TG. The US improved mechanical properties by increasing the tensile strength (with or without the application of TG). While combining US-TG produced a significant increase in thickness, decrease in elongation percentage, and increase in tensile strength. Which can be attributed to cross-linking produced by TG. Water vapour permeability increased in all cases. In general, the combination of US-TG treatments showed a more pronounced effect on the structure and mechanical properties.

Influence of chitosan nanoparticles and fennel essential oils (Foeniculum vulgare) on the shelf life of Huso huso fish fillets during the storage

Fish and fishery products are important parts of the human diet, but the microbial, chemical, and physical deteriorations limit their shelf life. Using the modified atmospheric packaging system and edible coatings is one of the main procedures to improve the shelf life of fish. In this research, the effect of chitosan nanoparticles (CNPs) loaded with fennel essential oils along with modified atmosphere packaging (MAP) system on chemical, microbial, and sensorial properties of Huso huso fish fillets during storage at fridge were evaluated. The results showed that coating fish fillets with CNPs and fennel EO significantly reduced the peroxide value, total volatile nitrogen, and thiobarbituric acid value compared with the control samples. Microbial analyses showed a lower number of mesophilic, psychotropic, pseudomonas, and lactic acid bacteria in coated fillets compared with control and MAP packaging. Fish fillets coated with CNPs and EO showed high acceptability in all sensorial attribute through the storage. It can be concluded that using CNPs and fennel EO along with MAP packaging can enhance the shelf life for H. huso fillets up to 18 days in the fridge.

Functional characterization of biopolymer based composite film: Incorporation of natural essential oils and antimicrobial agents

Rosemary (REO), mint essential oil (MEO), nisin and lactic acid were incorporated at 0.5% to develop a novel functional packaging film including chitosan pectin and starch polymers (0.75:1.5:0.75 w/w). Inclusion of REO and nisin significantly (p ≤ 0.05) improved water barrier properties (0.014 g.mm/m²24h), tensile strength (25.95 MPa) and thermal stability as compared to control. ATR-FTIR spectra and XRD pattern elucidated structural interaction between EO's and biocomposite films. Addition of REO of and nisin increased microsctructural heterogeneity and opacity (2.78). Incorporation of REO and nisin exhibited the highest inhibitory activity against all tested pathogenic strains (Bacillus subtilis, Escherichia coli, and Listeria monocytogenes). The antioxidant properties of biocomposite films were analyzed using reducing power, metal chelation, DPPH and ABTS radical scavenging assays, which enhanced significantly (p ≤ 0.05) with the addition of MEO and REO. This study validated that incorporation of natural additives in active biocomposite films offers promising functional ingredients for packaging materials for various food applications.

Preparation and Characterization of Chitosan-Based Ternary Blend Edible Films with Efficient Antimicrobial Activities for Food Packaging Applications

To improve the mechanical and antibacterial properties of chitosan (CS) films, a ternary blend edible film was prepared by incorporating CS, gelatin (GE), and natural cinnamon essential oil (CEo). Scanning electron microscopy (SEM), Atomic force microscopy (AFM), Fourier transform infrared spectroscopy, and X-ray diffraction were performed to evaluate the films. The mechanical properties, light transmission, thermal stability, hydrophilicity, and antibacterial activity of the films were also determined. The results confirmed all of the films exhibited excellent UV protection with low transparency at 600 nm. Compared with the CS films, the ternary composite film (CSGEo film, containing CS, GE, and CEo) had a higher elongation at break but a lower tensile strength. SEM images revealed that all films had smooth surfaces, although some obvious differences between CS and CSGEo films were observed by AFM. Additionally, the incorporation of GE and CEo to the films enhanced their thermal stability and contact angle, but decreased their crystallinity and wettability. The antimicrobial activity results showed that CSGEo films had excellent antimicrobial activity against Escherichia coli and Staphylococcus aureus, for which the antibacterial rate exceeded 98%. The minimum inhibitory concentrations of the CSGEo solution against E. coli and S. aureus were both 52.06 µg/mL, and the minimal bactericidal concentrations were 104.12 and 52.06 µg/mL, respectively. These results suggest that CSGEo films possess good mechanical and antibacterial properties, and therefore, their application in the food packaging industry is promising. PRACTICAL APPLICATION: The main raw materials of the edible films developed in this study are aquatic by-products, so the films are edible and biodegradable. The addition of gelatin and CEo improved the UV barrier and thermal properties but decreased the crystallinity and hydrophilicity of the films, making them suitable for use as packaging materials. CEo-incorporated films exhibited excellent mechanical properties and antibacterial activity and can, therefore, be used in the food packaging industry.

Nanotechnology interventions in aquaculture and seafood preservation

The inclusion of nanotechnologies in aquaculture and seafood preservation confronts a new edge that deserves attention in the recent trends of global food sector. Nanotechnology, being a novel and innovative approach has paved way to open up new perspective for the analysis of biomolecules, targeted drug delivery, protein or cells, clinical diagnosis, development of non-viral vectors for gene therapy, as transport vehicle for DNA, disease therapeutics etc. The current and potential use of nanotechnology would show the way to progression of smart and high performing fish. The comparative evaluation of extremely sophisticated nanotechnology with conventional process engineering proposes new prospectus in technological developments for superior water and wastewater technology processes. Nanoparticles have comprehensive advantages for management of drugs as liberation of vaccines and therefore hold the assurance for civilized protection of farmed fish against disease-causing pathogens. This review article explores the present concerns of food security, climate change as well as sustainability that are explored by the researchers in the area of nanotechnology, development of marine produce, along with its preservation and aquaculture.

An Attempt of Using β-Sitosterol-Corn Oil Oleogels to Improve Water Barrier Properties of Gelatin Film

Oleogel with tailored viscoelasticity is a great interest for food structuring, while its potential benefits for edible film performance are not clear. In this study, β-sitosterol (0, 5, 10, 15, and 20 wt%)-corn oil oleogel was developed and used in the formation of gelatin-based films. Importantly, adding oleogel significantly decreased water vapor permeability of the gelatin films, however, it had little negative influence on film strength. In addition, the results of this study demonstrated that increasing the sitosterol in oleogels led to an increasing number of ordered crystals formed in the oleogel, which contributed to compact and smooth surface of the film. Moreover, the incorporation of oleogel also caused some changes in molecule conformation and film barrier property. Therefore, the superior mechanical performance and moisture resistance properties of the film were obtained when 15% β-sitosterol was used to prepare oleogel. PRACTICAL APPLICATION: Corn oil oleogels β-sitosterol was incorporated with gelatin to prepare the gelatin film aiming to improve the water resistance of the films for its variety of practical production. The enhanced vapor permeability and accepted strength of the emulsion film indicated the potential application of it with a variety of edible packaging forms, such as films, pouch and sachet in medium and high humid condition.

The Effect of Nanofillers on the Functional Properties of Biopolymer-based Films: A Review

Waste from non-degradable plastics is becoming an increasingly serious problem. Therefore, more and more research focuses on the development of materials with biodegradable properties. Bio-polymers are excellent raw materials for the production of such materials. Bio-based biopolymer films reinforced with nanostructures have become an interesting area of research. Nanocomposite films are a group of materials that mainly consist of bio-based natural (e.g., chitosan, starch) and synthetic (e.g., poly(lactic acid)) polymers and nanofillers (clay, organic, inorganic, or carbon nanostructures), with different properties. The interaction between environmentally friendly biopolymers and nanofillers leads to the improved functionality of nanocomposite materials. Depending on the properties of nanofillers, new or improved properties of nanocomposites can be obtained such as: barrier properties, improved mechanical strength, antimicrobial, and antioxidant properties or thermal stability. This review compiles information about biopolymers used as the matrix for the films with nanofillers as the active agents. Particular emphasis has been placed on the influence of nanofillers on functional properties of biopolymer films and their possible use within the food industry and food packaging systems. The possible applications of those nanocomposite films within other industries (medicine, drug and chemical industry, tissue engineering) is also briefly summarized.

Enhanced functional properties of biopolymer film incorporated with curcurmin-loaded mesoporous silica nanoparticles for food packaging

Curcumin loaded mesoporous silica nanoparticle (SBA-15) was incorporated into chitosan (CS) film to improve the functional properties of pure CS film. Curcumin was loaded into SBA-15 (SBA-15-Cur) through a rotavapor method. The structural properties of SBA-15-Cur were characterised in detail by small-angle X-ray scattering, fourier transform-infrared (FT-IR) spectroscopy, transmission electron microscopy and N₂ adsorption-desorption analyses. The CS/SBA-15-Cur bionanocomposite film was prepared by solvent casting. The mechanical properties of the bionanocomposite film were improved by the addition of the SBA-15-Cur nanofiller, as revealed by the FT-IR analysis of the biocomposite film. However, the water vapour permeability of the films was not significantly influenced by the filler. Release studies suggested that the CS/SBA-15-Cur bionanocomposite film exhibited pH-responsive and sustained release behaviour of curcumin. The CS/SBA-15-Cur film demonstrated efficient antimicrobial activity against Staphylococcus aureus and Escherichia coli. These data indicated that the CS/SBA-15-Cur bionanocomposite film could be a promising active food packaging material.

Mango leaf extract incorporated chitosan antioxidant film for active food packaging

Health hazards associated with usage of plastic films for food preservation demands for development of active films from non-toxic and antioxidant rich bio-sources. The reported work highlights the development, characterization and application studies of chitosan films enhanced for their antioxidant activity by mango leaf extract (MLE) incorporation. Effect of MLE variation (1-5%) on the morphology, optical nature, water exposure and mechanical characteristics of the chitosan-MLE composite films was studied. Increase in the MLE concentration resulted in films with increased thickness and decreased moisture content. Contact angle, water solubility and vapor permeability analysis demonstrated the reduced hydrophilicity and water vapor penetrability of the films due to MLE inclusion. MLE films possessed better tensile strength (maximum of 23.06 ± 0.19 MPa) with reduced elongation ratio than the pure chitosan film (18.14 ± 0.72 MPa). Antioxidants assessment in terms of total phenolic content, DPPH radical scavenging, ferric reducing power and ABTS radical scavenging showed improved antioxidant activity with the incremental amounts of MLE in the chitosan films. Microscopic studies revealed the smooth, compact and dense nature of the MLE-chitosan films favouring low oxygen transport rates. Application studies to cashew nuts preservation for 28 days storage indicated 56% higher oxidation resistance for the 5% MLE film than a commercial polyamide/polyethylene film. Results highlight the potential and promising nature of MLE impregnated chitosan films as suitable alternative for active packaging films for food preservation.

Composite edible films and coatings from food-grade biopolymers

The development of edible films and coatings from food-grade biopolymers has advanced significantly during the past decade. The current state-of-the-art lies in the formulation of composite edible films and coatings from such biomolecules. Composite films and coatings refer to systems where multiple biopolymers have been combined to achieve beneficial properties. Carbohydrate, protein, and lipids have been preferred for developing such systems. Binary films and coatings have been prepared from multiple combinations including protein-protein, carbohydrate-carbohydrate and protein-carbohydrate. Similarly, ternary films and coatings have been prepared from protein-protein-carbohydrate combinations. In addition, several active ingredients including antimicrobial compounds have been loaded to these systems for the preparation of functional films and coatings. Therefore, the goal of this manuscript is to review the multitude of composite systems that are currently available for food packaging purposes. In addition, we discuss the application of composite coatings to fruits and vegetables, dairy, meat and seafood as model food systems.

Chitosan, gelatin and methylcellulose films incorporated with tannic acid for food packaging

In this work, chitosan, gelatin and methylcellulose films incorporated with tannic acid (TA) were synthesised, characterised and applied for the first time to preserve cherry tomatoes (Solanum lycopersicum var. cerasiforme) and grapes (Vitis vinifera). The addition of TA at 15% (w/w) increased the transparency value of biopolymer films. The highest increment of transparency value was obtained for MC-TA film, increased from 0.572 to 4.73 A/mm. Based on antimicrobial study, the addition of TA improved the antibacterial properties of biopolymers against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The ability of films to preserve both fruits was evaluated in a 14-day preservation study. The application of biopolymer films treated with TA has decreased the weight loss and browning index of fruits, as compared to control films. A significant reduction in the weight loss of cherry tomatoes wrapped with chitosan (from 21.3 to 19.6%), gelatin (from 22.1 to 15.5%) and methylcellulose (26.2 to 20.5%) films were obtained following TA treatment. Overall, results obtained from this study highlight the effects of TA on physiochemical properties of biopolymer films and their ability to preserve fruits.

Preparation and Identification of Optimal Synthesis Conditions for a Novel Alkaline Anion-Exchange Membrane

The physicochemical and mechanical properties of new alkaline anion-exchange membranes (AAEMs) based on chitosan (CS) and poly(vinyl alcohol) (PVA) polymers doped with unsupported copper nanoparticles (NPs) and copper exchanged over different porous materials were investigated regarding ion-exchange capacity (IEC), OH⁻ conductivity, water uptake (WU), water vapor permeability (WVP), and thermal and mechanical resistance. The influence of the type of filler included in different morphologies and filler loading has been explored using copper exchanged materials such as the layered porous titanosilicate AM-4, layered stannosilicate UZAR-S3, and zeolites Y, MOR, and BEA. Compared to commercially available anion-exchange membranes, the best performing membranes in terms of WU, IEC, OH⁻ conductivity and WVP in this study were those containing 10 wt % of Cu-AM-4 and Cu-UZAR-S3, although 10 wt % Cu-MOR provided better mechanical strength at close values of WVP and anion conductivity. It was also observed that when Cu was exchanged in a porous silicate matrix, its oxidation state was lower than when embedded as unsupported metal NPs. In addition, the statistical analysis of variance determined that the electrochemical properties of the membranes were noticeably affected by both the type and filler loading, and influenced also by the copper oxidation state and content in the membrane, but their hydrophilic properties were more affected by the polymers. The largest significant effects were noticed on the water sorption and transport properties, which gives scope for the design of AAEMs for electrochemical and water treatment applications.

Antibacterial and Barrier Properties of Gelatin Coated by Electrospun Polycaprolactone Ultrathin Fibers Containing Black Pepper Oleoresin of Interest in Active Food Biopackaging Applications

The present study evaluated the effect of using electrospun polycaprolactone (PCL) as a barrier coating and black pepper oleoresin (OR) as a natural extract on the morphology, thermal, mechanical, antimicrobial, oxygen, and water vapor barrier properties of solvent cast gelatin (GEL). The antimicrobial activity of the developed multilayer system obtained by the so-called electrospinning coating technique was also evaluated against Staphylococcus aureus strains for 10 days. The results showed that the multilayer system containing PCL and OR increased the thermal resistance, elongated the GEL film, and significantly diminished its permeance to water vapor. Active multilayer systems stored in hermetically closed bottles increased their antimicrobial activity after 10 days by inhibiting the growth of Staphylococcus aureus. This study demonstrates that addition of electrospun PCL ultrathin fibers and OR improved the properties of GEL films, which promoted its potential use in active food packaging applications.

Preparation and characterization of chitosan-based antimicrobial active food packaging film incorporated with apple peel polyphenols

In the present study, apple peel polyphenols (APP) were incorporated into chitosan (CS) to develop a novel functional film. Scanning electron microscopy, Fourier transform-infrared spectroscopy and thermogravimetric analyses were performed to study the structure, potential interaction and thermal stability of the prepared films. Physical properties including moisture content, density, color, opacity, water solubility, swelling ration and water vapor permeability were measured. The results revealed that addition of APP into CS significantly improved the physical properties of the film by increasing its thickness, density, solubility, opacity and swelling ratio whereas moisture content and water vapor permeability were decreased. Tensile strength and elongation at break of the CS-APP film with 1% APP was 16.48MPa and 13.33%, respectively, significantly lower than those for CS control film. Thermal stability of the prepared films was decreased while antioxidant and antimicrobial activities of the CS-based APP film were significantly increased. CS-APP film with 0.50% APP concentration exhibited good mechanical and antimicrobial properties, indicating that it could be developed as bio-composite food packaging material for the food industry.

Chitosan-based nanosystems and their exploited antimicrobial activity

Chitosan is a biodegradable and biocompatible natural polysaccharide that has a wide range of applications in the field of pharmaceutics, biomedical, chemical, cosmetics, textile and food industry. One of the most interesting characteristics of chitosan is its antibacterial and antifungal activity, and together with its excellent safety profile in human, it has attracted considerable attention in various research disciplines. The antimicrobial activity of chitosan is dependent on a number of factors, including its molecular weight, degree of deacetylation, degree of substitution, physical form, as well as structural properties of the cell wall of the target microorganisms. While the sole use of chitosan may not be sufficient to produce an adequate antimicrobial effect to fulfil different purposes, the incorporation of this biopolymer with other active substances such as drugs, metals and natural compounds in nanosystems is a commonly employed strategy to enhance its antimicrobial potential. In this review, we aim to provide an overview on the different approaches that exploit the antimicrobial activity of chitosan-based nanosystems and their applications, and highlight the latest advances in this field.

Development of Antimicrobial Biocomposite Films to Preserve the Quality of Bread

This study focused on the development of gelatin-based films with incorporation of microcrystalline cellulose as reinforcement material. Clove (Syzygium aromaticum), nutmeg (Myristica fragrans), and black pepper (Piper nigrum) oleoresins containing antimicrobial compounds of natural origin were incorporated into the films. The mechanical, thermal, optical, and structural properties, as well as color, seal strength and permeability to water vapor, light, and oil of the films were determined. Adding oleoresins to the gelatin matrix increased the elongation of the material and significantly diminished its permeability to water vapor and oil. Evaluation of the potential use of films containing different oleoresins as bread packaging material was influenced by the film properties. The biocomposite film containing oleoresin from black pepper was the most effective packaging material for maintaining bread's quality characteristics.

Emerging Chitosan-Based Films for Food Packaging Applications

Recent years have witnessed great developments in biobased polymer packaging films for the serious environmental problems caused by the petroleum-based nonbiodegradable packaging materials. Chitosan is one of the most abundant biopolymers after cellulose. Chitosan-based materials have been widely applied in various fields for their biological and physical properties of biocompatibility, biodegradability, antimicrobial ability, and easy film forming ability. Different chitosan-based films have been fabricated and applied in the field of food packaging. Most of the review papers related to chitosan-based films are focusing on antibacterial food packaging films. Along with the advances in the nanotechnology and polymer science, numerous strategies, for instance direct casting, coating, dipping, layer-by-layer assembly, and extrusion, have been employed to prepare chitosan-based films with multiple functionalities. The emerging food packaging applications of chitosan-based films as antibacterial films, barrier films, and sensing films have achieved great developments. This article comprehensively reviews recent advances in the preparation and application of engineered chitosan-based films in food packaging fields.

Evaluation of the efficacy of nisin-loaded chitosan nanoparticles against foodborne pathogens in orange juice

The current study aimed to fabricate nisin-loaded chitosan (N-CS) nanoparticles through ionic interactions between positive amino groups of chitosan and negatively charged tripolyphosphate ions in the presence of nisin and to evaluate their efficacy against foodborne pathogens in orange juice. The synthesized nanoparticles were sphere-shaped and homogenous with an average size of 64.34 ± 2.1 and 147.93 ± 2.9 for chitosan and N-CS nanoparticles, respectively. The encapsulation efficiency of nisin into nanoparticles was 67.32 ± 0.63%. Both chitosan and N-CS nanoparticles showed greater stability, as indicated by a higher zeta potential value of + 49.3 and + 33.4 mV, respectively. The in vitro antibacterial activities of chitosan and N-CS nanoparticles were investigated against the Gram-positive bacteria Staphylococcus aureus and Listeria monocytogenes and the Gram-negative bacteria Escherichia coli O157:H7 and Salmonella Typhimurium. N-CS nanoparticles showed higher activity compared with chitosan nanoparticles. The highest reduction of microorganisms was recorded for S. aureus of 3.82 log CFU/ml and L. monocytogenes of 3.61 log CFU/ml. The antimicrobial activity of N-CS nanoparticles in orange juice for 48 h revealed higher activity compared with the control against all the tested strains. The highest microbial reduction was recorded for N-CS nanoparticles against S. aureus with a 3.84 log CFU/ml reduction. L. monocytogenes and E. coli 0157:H7 were reduced by 3.54 and 3.44 log CFU/ml, respectively. The results showed high potential for the N-CS nanoparticles to be used as potent antibacterial agents in food and other related areas.