Factors affecting the physical stability (aggregation) of peptide therapeutics

Polyamine-Responsive Morphological Transformation of a Supramolecular Peptide for Specific Drug Accumulation and Retention in Cancer Cells

The precise accumulation and extended retention of nanomedicines in the tumor tissue has been highly desired for cancer therapy. Here a novel supramolecular-peptide derived nanodrug (SPN) that can be transformed to microfibers in response to intracellular polyamine in cancer cells for significantly enhanced tumor specific accumulation and retention is developed. The supramolecular-peptide is constructed via the non-covalent interactions between cucurbit[7]uril (CB[7]) and Phe on Phe-Phe-Val-Leu-Lys-camptothecin conjugates (FFVLK-CPT, PC). The resultant amphiphilic supramolecular complex subsequently self-assembles into nanoparticles with a hydrodynamic diameter of 164.2 ± 3.7 nm. Upon internalization into spermine-overexpressed cancer cells, the CB[7]-Phe host-guest pairs can be competitively dissociated by spermine and can release free PC, which immediately form β-sheet structures and subsequently reorganize into microfibers, leading to dramatically improved accumulation, retention, and sustained release of CPT in tumor cells for highly effective cancer therapy. Accordingly, this SPN exhibit rather low toxicity against non-cancerous cells due to the morphological stability and fast exocytosis of the nanodrugs in those cells without abundant spermine. This study reports the first supramolecular peptide capable of polyamine-responsive "nanoparticle-to-microfiber" transformation for specific tumor therapy with minimal side effects. This work also offers novel insights to the design and development of stimuli-responsive nanomaterials as precision medicine.

Effects of Shear Rate and Protein Concentration on Amyloidogenesis via Interfacial Shear

The influence of hydrodynamics on protein fibrillization kinetics is relevant to biophysics, biochemical reactors, medicine, and disease. This investigation focused on the effects of interfacial shear on the fibrillization kinetics of insulin. Human insulin served as a model protein for studying shear-induced fibrillization with relevance to amyloid diseases such as Alzheimer's, Parkinson's, prions, and type 2 diabetes. Insulin solutions at different protein concentrations were subjected to shear flows with prescribed interfacial angular velocities using a knife-edge (surface) viscometer (KEV) operating in a laminar axisymmetric flow regime where inertia is significant. Fibrillization kinetics were quantified using intrinsic fibrillization rate and times (onset, half, and end) determined through spectroscopic measurement of monomer extinction curves and fitting to a sigmoidal function. Additionally, the occurrence of gelation was determined through macroscopic imaging and transient fibril microstructure was captured using fluorescence microscopy. The results showed that increasing interfacial shear rate produced a monotonic increase in intrinsic fibrillization rate and a monotonic decrease in fibrillization time. Protein concentration did not significantly impact the intrinsic fibrillization rate or times; however, a minimum fibril concentration for gelation was found. Protein microstructure showed increasing aggregation and plaque/cluster formation with time.

The degradation of intracrystalline mollusc shell proteins: A proteomics study of Spondylus gaederopus

Mollusc shells represent excellent systems for the preservation and retrieval of genuine biomolecules from archaeological or palaeontological samples. As a consequence, the post-mortem breakdown of intracrystalline mollusc shell proteins has been extensively investigated, particularly with regard to its potential use as a "molecular clock" for geochronological applications. But despite seventy years of ancient protein research, the fundamental aspects of diagenesis-induced changes to protein structures and sequences remain elusive. In this study we investigate the degradation of intracrystalline proteins by performing artificial degradation experiments on the shell of the thorny oyster, Spondylus gaederopus, which is particularly important for archaeological research. We used immunochemistry and tandem mass tag (TMT) quantitative proteomics to simultaneously track patterns of structural loss and of peptide bond hydrolysis. Powdered and bleached shell samples were heated in water at four different temperatures (80, 95, 110, 140 °C) for different time durations. The structural loss of carbohydrate and protein groups was investigated by immunochemical techniques (ELLA and ELISA) and peptide bond hydrolysis was studied by tracking the changes in protein/peptide relative abundances over time using TMT quantitative proteomics. We find that heating does not induce instant organic matrix decay, but first facilitates the uncoiling of cross-linked structures, thus improving matrix detection. We calculated apparent activation energies of structural loss: E_a (carbohydrate groups) = 104.7 kJ/mol, E_a (protein epitopes) = 104.4 kJ/mol, which suggests that secondary matrix structure degradation may proceed simultaneously with protein hydrolysis. While prolonged heating at 110 °C (10 days) results in complete loss of the structural signal, surviving peptide sequences were still observed. Eight hydrolysis-prone peptide bonds were identified in the top scoring shell sequence, the uncharacterised protein LOC117318053 from Pecten maximus. Interestingly, these were not the expected "weak" bonds based on published theoretical stabilities calculated for peptides in solution. This further confirms that intracrystalline protein degradation patterns are complex and that the overall microchemical environment plays an active role in protein stability. Our TMT approach represents a major stepping stone towards developing a model for studying protein diagenesis in biomineralised systems.

Evaluating parameters affecting drug fate at the intramuscular injection site

Intramuscular (IM) injections are a well-established method of delivering a variety of therapeutics formulated for parenteral administration. While the wide range of commercial IM pharmaceuticals provide a wealth of pharmacokinetic (PK) information following injection, there remains an inadequate understanding of drug fate at the IM injection site that could dictate these PK outcomes. An improved understanding of injection site events could improve approaches taken by formulation scientists to identify therapeutically effective and consistent drug PK outcomes. Interplay between the typically non-physiological aspects of drug formulations and the homeostatic IM environment may provide insights into the fate of drugs at the IM injection site, leading to predictions of how a drug will behave post-injection in vivo. Immune responses occur by design after e.g. vaccine administration, however immune responses post-injection are not in the scope of this article. Taking cues from existing in vitro modelling technologies, the purpose of this article is to propose "critical parameters" of the IM environment that could be examined in hypothesis-driven studies. Outcomes of such studies might ultimately be useful in predicting and improving in vivo PK performance of IM injected drugs.

Aggregation of protein therapeutics enhances their immunogenicity: causes and mitigation strategies

Protein aggregation in biotherapeutics has been identified to increase immunogenicity, leading to immune-mediated adverse effects, such as severe allergic responses including anaphylaxis. The induction of anti-drug antibodies (ADAs) moreover enhances drug clearance rates, and can directly block therapeutic function. In this review, identified immune activation mechanisms triggered by protein aggregates are discussed, as well as physicochemical properties of aggregates, such as size and shape, which contribute to immunogenicity. Furthermore, factors which contribute to protein stability and aggregation are considered. Lastly, with these factors in mind, we encourage an innovative and multidisciplinary approach with regard to further research in the field, with the overall aim to avoid immunogenic aggregation in future drug development.

Differential Effects of Oleuropein and Hydroxytyrosol on Aggregation and Stability of CFTR NBD1-ΔF508 Domain

Cystic Fibrosis (CF) is caused by loss of function mutations in the Cystic Fibrosis transmembrane conductance regulator (CFTR). The folding and assembly of CFTR is inefficient. Deletion of F508 in the first nucleotide binding domain (NBD1-ΔF508) further disrupts protein stability leading to endoplasmic reticulum retention and proteasomal degradation. Stabilization and prevention of NBD1-ΔF508 aggregation is critical to rescuing the folding and function of the entire CFTR channel. We report that the phenolic compounds Oleuropein and Hydroxytryosol reduce aggregation of NBD1-ΔF508. The NBD1-ΔF508 aggregate size was smaller in the presence of Hydroxytryosol as determined by dynamic light scattering. Neither phenolic compound increased the thermal stability of NBD1-ΔF508 as measured by differential scanning fluorimetry. Interestingly, Hydroxytyrosol inhibited the stabilizing effect of the indole compound BIA, a known stabilizer, on NBD1-ΔF508. Molecular docking studies predicted that Oleuropein preferred to bind in the F1-type core ATP-binding subdomain in NBD1. In contrast, Hydroxytyrosol preferred to bind in the α4/α5/α6 helical bundle of the ABCα subdomain of NBD1 next to the putative binding site for BIA. This result suggests that Hydroxytyrosol interferes with BIA binding, thus providing an explanation for the antagonistic effect on NBD1 stability upon incubation with both compounds. To our knowledge, these studies are the first to explore the effects of these two phenolic compounds on the aggregation and stability of NBD1-ΔF508 domain of CFTR.

Sustained Hippocampal Neural Plasticity Questions the Reproducibility of an Amyloid-β-Induced Alzheimer's Disease Model

BACKGROUND

The use of Alzheimer's disease (AD) models obtained by intracerebral infusion of amyloid-β (Aβ) has been increasingly reported in recent years. Nonetheless, these models may present important challenges.

OBJECTIVE

We have focused on canonical mechanisms of hippocampal-related neural plasticity to characterize a rat model obtained by an intracerebroventricular (icv) injection of soluble amyloid-β42 (Aβ42).

METHODS

Animal behavior was evaluated in the elevated plus maze, Y-Maze spontaneous or forced alternation, Morris water maze, and open field, starting 2 weeks post-Aβ42 infusion. Hippocampal neurogenesis was assessed 3 weeks after Aβ42 injection. Aβ deposition, tropomyosin receptor kinase B levels, and neuroinflammation were appraised at 3 and 14 days post-Aβ42 administration.

RESULTS

We found that immature neuronal dendritic morphology was abnormally enhanced, but proliferation and neuronal differentiation in the dentate gyrus was conserved one month after Aβ42 injection. Surprisingly, animal behavior did not reveal changes in cognitive performance nor in locomotor and anxious-related activity. Brain-derived neurotrophic factor related-signaling was also unchanged at 3 and 14 days post-Aβ icv injection. Likewise, astrocytic and microglial markers of neuroinflammation in the hippocampus were unaltered in these time points.

CONCLUSION

Taken together, our data emphasize a high variability and lack of behavioral reproducibility associated with these Aβ injection-based models, as well as the need for its further optimization, aiming at addressing the gap between preclinical AD models and the human disorder.

Chemical stabilization of γ-polyglutamate by chitosan and the effect of co-solvents on the stability

In protein-based formulations, conformational distortions and attractive interactions may cause insoluble and undesired aggregates. In the case of ionic peptides, including cationic or anionic, commonly electrostatic interactions are the main factors that control structure assembling. In this study, it was proposed that grafting of chitosan (CS) to γ-polyglutamic acid (γ-PGA) might exhibit much strong inhibiting effect on the formation of protein aggregates due to multiple amino groups and hydrophilic properties. To guarantee stable and safe biopharmaceutical formulation, the potency of a variety of stabilizers including sugars (glucose, sucrose), polyols (sorbitol, glycerol), surfactant (Tween 20), salting-out salt (PBS), and also different pH values have been evaluated on stabilizing or destabilizing the native state of CS-g-PGA copolymer using FTIR, CD, DLS, and SDS-PAGE. The comparable analysis revealed that the stability of CS-g-PGA was strongly dependent on pH owing to the polyelectrolyte characteristics of the polymers. Altogether these results implied that CS at optimized conditions might be an important precursor for the pharmaceutical industry and function as a new polymer for aggregation suppression and protein stabilization.

Therapeutic peptides for chemotherapy: Trends and challenges for advanced delivery systems

The past decades witnessed an increasing interest in peptides as clinical therapeutics. Rightfully considered as a potential alternative for small molecule therapy, these remarkable pharmaceuticals can be structurally fine-tuned to impact properties such as high target affinity, selectivity, low immunogenicity along with satisfactory tissue penetration. Although physicochemical and pharmacokinetic challenges have mitigated, to some extent, the clinical applications of therapeutic peptides, their potential impact on modern healthcare remains encouraging. According to recent reports, there are more than 400 peptides under clinical trials and 60 were already approved for clinical use. As the demand for efficient and safer therapy became high, especially for cancers, peptides have shown some exciting developments not only due to their potent antiproliferative action but also when used as adjuvant therapies, either to decrease side effects with tumor-targeted therapy or to enhance the activity of anticancer drugs via transbarrier delivery. The first part of the present review gives an insight into challenges related to peptide product development. Both molecular and formulation approaches intended to optimize peptide's pharmaceutical properties are covered, and some of their current issues are highlighted. The second part offers a comprehensive overview of the emerging applications of therapeutic peptides in chemotherapy from bioconjugates to nanovectorized therapeutics.

Translational Research for Orthopedic Bone Graft Development

Designing biomaterials for bone-substitute applications is still a challenge regarding the natural complex structure of hard tissues. Aiming at bone regeneration applications, scaffolds based on natural collagen and synthetic nanohydroxyapatite were developed, and they showed adequate mechanical and biological properties. The objective of this work was to perform and evaluate a scaled-up production process of this porous biocomposite scaffold, which promotes bone regeneration and works as a barrier for both fibrosis and the proliferation of scar tissue. The material was produced using a prototype bioreactor at an industrial scale, instead of laboratory production at the bench, in order to produce an appropriate medical device for the orthopedic market. Prototypes were produced in porous membranes that were e-beam irradiated (the sterilization process) and then analysed by scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM), dynamic mechanical analysis (DMA), cytotoxicity tests with mice fibroblasts (L929), human osteoblast-like cells (MG63) and human MSC osteogenic differentiation (HBMSC) with alkaline phosphatase (ALP) activity and qPCR for osteogenic gene expression. The prototypes were also implanted into critical-size bone defects (rabbits' tibia) for 5 and 15 weeks, and after that were analysed by microCT and histology. The tests performed for the physical characterization of the materials showed the ability of the scaffolds to absorb and retain water-based solvents, as well as adequate mechanical resistance and viscoelastic properties. The cryogels had a heteroporous morphology with microporosity and macroporosity, which are essential conditions for the interaction between the cells and materials, and which consequently promote bone regeneration. Regarding the biological studies, all of the studied cryogels were non-cytotoxic by direct or indirect contact with cells. In fact, the scaffolds promoted the proliferation of the human MSCs, as well as the expression of the osteoblastic phenotype (osteogenic differentiation). The in vivo results showed bone tissue ingrowth and the materials' degradation, filling the critical bone defect after 15 weeks. Before and after irradiation, the studied scaffolds showed similar properties when compared to the results published in the literature. In conclusion, the material production process upscaling was optimized and the obtained prototypes showed reproducible properties relative to the bench development, and should be able to be commercialized. Therefore, it was a successful effort to harness knowledge from the basic sciences to produce a new biomedical device and enhance human health and wellbeing.

pH-dependent disintegration of insulin amyloid fibrils monitored with atomic force microscopy and surface-enhanced Raman spectroscopy

Aggregation of insulin into amyloid fibrils is characterized by the conversion of the native secondary structure of the peptide into an enriched ß-sheet conformation. In vitro, the growth or disintegration of amyloid fibrils can be influenced by various external factors such as pH, temperature etc. While current studies mainly focus on the influence of environmental conditions on the growth process of insulin fibrils, the present study investigates the effect of pH changes on the morphology and secondary structure of mature fibrils. In the experiments, insulin is fibrillated at pH 2.5 and the grown mature fibrils are suspended in pH 4-7 solutions. The obtained structures are analyzed by atomic force microscopy (AFM) and surface-enhanced Raman spectroscopy (SERS). Initially grown mature fibrils from pH 2.5 solutions show a long and intertwined morphology. Increasing the solution pH initiates the gradual disintegration of the filamentous morphology into unordered aggregates. These observations are supported by SERS experiments, where the spectra of the mature fibrils show mainly a β-pleated sheet conformation, while the amide I band region of the amorphous aggregates indicate exclusively α-helix/unordered structures. The results demonstrate that no complex reagent is required for the disintegration of insulin fibrils. Simply regulating the pH of the environment induces local changes in the protonation state within the peptide chains. This effectively disrupts the well-ordered β-sheet structure network based on hydrogen bonds.

Refining the amyloid β peptide and oligomer fingerprint ambiguities in Alzheimer's disease: Mass spectrometric molecular characterization in brain, cerebrospinal fluid, blood, and plasma

Since its discovery, amyloid-β (Aβ) has been the principal target of investigation of in Alzheimer's disease (AD). Over the years however, no clear correlation was found between the Aβ plaque burden and location, and AD-associated neurodegeneration and cognitive decline. Instead, diagnostic potential of specific Aβ peptides and/or their ratio, was established. For instance, a selective reduction in the concentration of the aggregation-prone 42 amino acid-long Aβ peptide (Aβ42) in cerebrospinal fluid (CSF) was put forward as reflective of Aβ peptide aggregation in the brain. With time, Aβ oligomers-the proposed toxic Aβ intermediates-have emerged as potential drivers of synaptic dysfunction and neurodegeneration in the disease process. Oligomers are commonly agreed upon to come in different shapes and sizes, and are very poorly characterized when it comes to their composition and their "toxic" properties. The concept of structural polymorphism-a diversity in conformational organization of amyloid aggregates-that depends on the Aβ peptide backbone, makes the characterization of Aβ aggregates and their role in AD progression challenging. In this review, we revisit the history of Aβ discovery and initial characterization and highlight the crucial role mass spectrometry (MS) has played in this process. We critically review the common knowledge gaps in the molecular identity of the Aβ peptide, and how MS is aiding the characterization of higher order Aβ assemblies. Finally, we go on to present recent advances in MS approaches for characterization of Aβ as single peptides and oligomers, and convey our optimism, as to how MS holds a promise for paving the way for progress toward a more comprehensive understanding of Aβ in AD research.

Peptide foldamer-based self-assembled nanostructures containing cyclic beta-amino acids

Peptide soft materials belong to an emerging branch of materials sciences due to their growing importance as responsive materials in diagnostics, therapeutics, and biomedical applications. The diversity provided by easily modifiable peptide sequences can be further increased by introducing nonnatural amino acids such as cyclic β-amino acids, leading to the formation of foldamers. Moreover, it is possible to combine peptide chains with other polymers, aromatic compounds, etc. to create hybrids with completely new properties and applications. In this review, we focus on the cis/trans enantiomers of three cyclic β-amino acids: 2-aminocyclobutane-1-carboxylic acid (ACBC), 2-aminocyclopentane-1-carboxylic acid (ACPC) and 2-aminocyclohexane-1-carboxylic acid (ACHC). The peptides discussed here either contain exclusively β-amino acids or are α,β-peptides, and they undergo self-assembly by forming different interactions that lead to the creation of well-defined nanostructures.

Glycosylation of a Nonfibrillizing Appendage Alters the Self-Assembly Pathway of a Synthetic β-Sheet Fibrillizing Peptide

Owing to their biocompatibility and biodegradability, short synthetic peptides that self-assemble into elongated β-sheet fibers (i.e., peptide nanofibers) are widely used to create biomaterials for diverse medical and biotechnology applications. Glycosylation, which is a common protein post-translational modification, is gaining interest for creating peptide nanofibers that can mimic the function of natural carbohydrate-modified proteins. Recent reports have shown that glycosylation can disrupt the fibrillization of natural amyloid-forming peptides. Here, using transmission electron microscopy, fluorescence microscopy, and thioflavin T spectroscopy, we show that glycosylation at a site external to the fibrillization domain can alter the self-assembly pathway of a synthetic fibrillizing peptide, NSGSGQQKFQFQFEQQ (NQ11). Specifically, an NQ11 variant modified with N-linked N-acetylglucosamine, N(GlcNAc)SGSG-Q11 (GQ11), formed β-sheet nanofibers more slowly than NQ11 in deionized water (pH 5.8), which correlated to the tendency of GQ11 to form a combination of short fibrils and nonfibrillar aggregates, whereas NQ11 formed extended nanofibers. Acidic phosphate buffer slowed the rate of GQ11 fibrillization and altered the morphology of the structures formed yet had no effect on NQ11 fibrillization rate or morphology. The buffer ionic strength had no effect on the fibrillization rate of either peptide, while the diphosphate anion had a similar effect on the rate of fibrillization of both peptides. Collectively, these data demonstrate that a glycan moiety located external to the β-sheet fibrillizing domain can alter the pH-dependent self-assembly pathway of a synthetic peptide, leading to significant changes in the fibril mass and morphology of the structures formed. These observations add to the understanding of the effect of glycosylation on peptide self-assembly and should guide future efforts to develop biomaterials from synthetic β-sheet fibrillizing glycopeptides.

Computational Methods and Tools in Antimicrobial Peptide Research

The evolution of antibiotic-resistant bacteria is an ongoing and troubling development that has increased the number of diseases and infections that risk going untreated. There is an urgent need to develop alternative strategies and treatments to address this issue. One class of molecules that is attracting significant interest is that of antimicrobial peptides (AMPs). Their design and development has been aided considerably by the applications of molecular models, and we review these here. These methods include the use of tools to explore the relationships between their structures, dynamics, and functions and the increasing application of machine learning and molecular dynamics simulations. This review compiles resources such as AMP databases, AMP-related web servers, and commonly used techniques, together aimed at aiding researchers in the area toward complementing experimental studies with computational approaches.

Current and potential applications of simultaneous DSC-FTIR microspectroscopy for pharmaceutical analysis

Quality control (QC) is the most important key issue in the pharmaceutical industry to ensure the quality of drug products. Many analytical instruments and techniques in pharmaceutical analysis are applied to assess the quality and quantity of the drugs. In the current and future trends, a combination of digitization, automation and hyphenation with high throughput on-line performance will be the topics for the future of pharmaceutical QC. The hyphenated analytical techniques have recently received great attention as unique means to solve complex analytical problems in a short period of time. This review article is an update on the recent potential applications of hyphenated technique developed from the coupling of a rapid separation or induction technique (differential scanning calorimetry; DSC) and an on-line spectroscopic (Fourier transform infrared; FTIR) detection technology to carry out an one-step solid-state analysis in pharmaceutical formulation developments, including (1) intramolecular condensation of pharmaceutical polymers, (2) intramolecular cyclization of drugs and sweetener, (3) polymorphic transformation of drugs and excipients, (4) drug-polymer (excipient) interaction, (5) fast cocrystal screening and formation. This simultaneous DSC-FTIR microspectroscopy can also provide an easy and direct method for one-step screening and qualitative detection of drug stability in real time.

Investigating photodegradation of antibodies governed by the light dosage

The present study investigated the photodegradation of three different monoclonal antibodies (mAb) by visible light. Several chromatographic techniques, such as size-exclusion and hydrophobic interaction chromatography as well as mass spectrometry were used to measure relative changes of various oxidation related monoclonal antibody species. The results show that visible light is indeed capable of inducing the formation of protein photo-oxidation products, such as acidic, basic, hydrophilic, and several other protein species with altered physicochemical properties. Although, the formation rate of degradants of these three protein species was dependent on the light source's intensity (I), their yield is clearly correlated to the applied light dosage (ld), which is defined as the product of light intensity I and irradiation time t (light dosage = I·t). Hence, our findings indicate that the degradation of monoclonal antibodies can be described according to the Bunsen-Roscoe reciprocity law. This correlation can be useful to assess the impact of photodegradation of biologics with regards to changes in light intensity and/or duration of light exposure of the protein, e.g. during the manufacturing of biologics.

Transportation of a commercial premixed intravenous insulin product through a pneumatic tube system

PURPOSE

Delivery of insulin products via pneumatic tubes is often avoided in health systems, as agitation may cause insulin proteins to destabilize, resulting in loss of function through denaturation, aggregation, or other processes. The actual loss of potency due to delivery via pneumatic tubes has not been reported for new, ready-to-use insulin products.

METHODS

Samples were drawn from 7 commercial intravenous (IV) bags containing a 100 units/100 mL premixed solution of regular insulin in sodium chloride injection (Myxredlin, Baxter). The bags were then exposed to 7 unique long-distance pneumatic tube routes. The post-transportation bags were visually inspected for evidence of foaming. Samples were drawn from the post-transportation bags and insulin concentrations were analyzed via an enzyme immunoassay and compared to pretransportation concentrations.

RESULTS

All seven post-transportation insulin samples were within 10% of their respective pretransportation sample. No foaming was observed in any of the Myxredlin bags after transportation through the pneumatic tube system.

CONCLUSION

Transporting 100 unit/100 mL Myxredlin i.v. bags through a pneumatic tube system does not result in a clinically significant loss of potency. Therefore, delivery of this drug product via a pneumatic tube system to patient care areas can be considered in daily practice.

Prolonged activity of exenatide: Detailed comparison of Site-specific linear polyglycerol- and poly(ethylene glycol)-conjugates

Exenatide is a small therapeutic peptide being currently used in clinic for the treatment of diabetes mellitus type II, however, displaying a short blood circulation time which makes two daily injections necessary. Covalent polymer modification of a protein is a well-known approach to overcome this limitation, resulting in steric shielding, an increased size and therefore a longer circulation half-life. In this study, we employed site-selective C-terminal polymer ligation of exenatide via copper-catalyzed azide-alkyne-cycloaddition (CuAAC) to yield 1:1-conjugates of either poly(ethylene glycol) (PEG) or linear polyglycerol (LPG) of different molecular weights. Our goal was to compare the impact of the two polymers on size, structure and activity of exenatide on the in vitro and in vivo level. Both polymers did not alter the secondary structure of exenatide and expectedly increased its hydrodynamic size, where the LPG-versions of exenatide showed slightly smaller values than their PEG-analogs of same molecular weight. Upon conjugation, GLP-1 receptor activation was diminished, however, still enabled maximum receptor response at slightly higher concentrations. Exenatide modified with a 40 kDa LPG (Ex-40-LPG) showed significant reduction of the blood glucose level in diabetic mice for up to 72 h, which was comparable to its PEG-analog, but 9-fold longer than native exenatide (8 h).

Mesoporous Silica Nanoparticles: Properties and Strategies for Enhancing Clinical Effect

Due to the theragnostic potential of mesoporous silica nanoparticles (MSNs), these were extensively investigated as a novel approach to improve clinical outcomes. Boasting an impressive array of formulations and modifications, MSNs demonstrate significant in vivo efficacy when used to identify or treat myriad malignant diseases in preclinical models. As MSNs continue transitioning into clinical trials, a thorough understanding of the characteristics of effective MSNs is necessary. This review highlights recent discoveries and advances in MSN understanding and technology. Specific focus is given to cancer theragnostic approaches using MSNs. Characteristics of MSNs such as size, shape, and surface properties are discussed in relation to effective nanomedicine practice and projected clinical efficacy. Additionally, tumor-targeting options used with MSNs are presented with extensive discussion on active-targeting molecules. Methods for decreasing MSN toxicity, improving site-specific delivery, and controlling release of loaded molecules are further explained. Challenges facing the field and translation to clinical environments are presented alongside potential avenues for continuing investigations.

Preparation and Preliminary Evaluation of Neurotensin Radiolabelled with 68Ga and 177Lu as Potential Theranostic Agent for Colon Cancer

The neurotensin is a tridecapeptide involved in the proliferation of colon cancer, the overexpression of neurotensin receptors occurring at an early stage development of many tumours. Targeting neurotensin receptors by using the same biological active molecule is an effective approach for both imaging quantification and treatment. The present work aimed to demonstrate the ability of radiolabelled neurotensin to specifically target colon cancer cells, and substantiate its usefulness in targeted imaging and radiotherapy, depending on the emission of the coupled radioisotope. Syntheses of ⁶⁸Ga–DOTA–NT and ¹⁷⁷Lu–DOTA–NT were developed to obtain a level of quality suitable for preclinical use with consistent high synthesis yields. Radiochemical purity meets the pharmaceutical requirements, and it is maintained 4 h for ⁶⁸Ga–DOTA–NT and 48 h for ¹⁷⁷Lu–DOTA–NT. Extensive in vitro studies were conducted to assess the uptake and retention of ⁶⁸Ga–DOTA–NT, the amount of non-specific binding of neurotensin and the effect of ¹⁷⁷Lu–DOTA–NT on HT–29 cells. In vivo biodistribution of ⁶⁸Ga–DOTA–NT revealed significant uptake at the tumour site, along with fast clearance evidenced by decreasing activity in kidneys and blood after 60 min p.i. ¹⁷⁷Lu–DOTA–NT exhibited similar uptake in the tumour, but also a significant uptake at 14 days p.i. in the bone marrow was reported. These results successfully demonstrated the potential of neurotensin to deliver imaging/therapeutic ⁶⁸Ga/¹⁷⁷Lu radioisotopes pair, but also the need for further evaluation of the possible radiotoxicity effects on the liver, kidneys or bone marrow.

High-Throughput Screening for Colloidal Stability of Peptide Formulations Using Dynamic and Static Light Scattering

Selection of an appropriate formulation to stabilize therapeutic proteins against aggregation is one of the most challenging tasks in early-stage drug product development. The amount of aggregates is more difficult to quantify in the case of peptides due to their small molecular size. Here, we investigated the suitability of diffusion self-interaction parameters (k_D) and osmotic second virial coefficients (B₂₂) for high-throughput (HT) screening of peptide formulations regarding their aggregation risk. These parameters were compared to the effect of thermal stress on colloidal stability. The formulation matrix comprised six buffering systems at two selected pH values, four tonicity agents, and a common preservative. The results revealed that electrostatic interactions are the main driver to control colloidal stability. Preferred formulations consisted of acetate and succinate buffer at pH 4.5 combined with glycerol or mannitol and optional m-cresol. k_D proved to be a suitable surrogate for B₂₂ as an indicator of high colloidal stability in the case of peptides as was previously described for globular proteins and antibodies. Formulation assessment solely based on k_D obtained by HT methods offers important insights into the optimization of colloidal stability during the early development of peptide-based liquid formulations and can be performed with a limited amount of peptide (∼360 mg).

The effects of nanobubbles on the assembly of glucagon amyloid fibrils

Some recent studies have shown that the surface and interface play an important role in the assembly and aggregation of amyloid proteins. However, it is unclear how the gas-liquid interface affects the protein assembly at the nanometer scale although the presence of gas-liquid interfaces is very common in in vitro experiments. Nanobubbles have a large specific surface area, which provides a stage for interactions with various proteins and peptides on the nanometer scale. In this work, nanobubbles produced in solution were employed for studying the effects of the gas-liquid interface on the assembly of glucagon proteins. Atomic force microscopy (AFM) studies showed that nanobubble-treated glucagon solution formed fibrils with an apparent height of 4.02 ± 0.71 nm, in contrast to the fibrils formed with a height of 2.14 ± 0.53 nm in the control. Transmission electron microscopy (TEM) results also showed that nanobubbles promoted the assembly of glucagon to form more fibrils. Thioflavin T (ThT) fluorescence and Fourier transform infrared (FTIR) analyses indicated that the nanobubbles induced the change of the glucagon conformation to a β-sheet structure. A mechanism that explains how nanobubbles affect the assembly of glucagon amyloid fibrils was proposed based on the above-mentioned experimental results. Given the fact that there are a considerable amount of nanobubbles existing in protein solutions, our results indicate that nanobubbles should be considered for fully understanding the protein aggregation events in vitro.

Lysozyme-dalargin self-organization at the aqueous-air and liquid-liquid interfaces

An experimental study of protein-peptide binding was performed by means of radiochemical and spectroscopic methods. Lysozyme and dalargin were chosen due to their biological and physiological importance. By means of tensiometry and radiochemical assays, it was found that dalargin possesses rather high surface activity at the aqueous-air and aqueous-p-xylene interfaces to be substituted by protein. Dalargin forms a hydrophobic complex with lysozyme in which the secondary structure of lysozyme is preserved. When lysozyme forms a mixed adsorption layer with dalargin at the aqueous-air surface, the peptide prevents protein from concentrating in the subsurface monolayer. In the presence of p-xylene protein in the interface, reorganization occurs quickly, so there is no lag in the interfacial tension time dependence. The interfacial tension in this case is controlled by protein and/or protein-peptide complexes. An increase in the enzymatic activity of lysozyme in the presence of dalargin was confirmed by a docking model that suggests the formation of hydrogen bonds between dalargin and amino acid residues in the active site.

Changes in the stability and antioxidant activities of different molecular weight bioactive peptide extracts obtained from beef during in vitro human digestion by gut microbiota

This study was conducted to determine changes in the stability and antioxidant activity of extracts of bioactive peptides with different molecular weights (<3 and <10 kDa) obtained from beef myofibrillar protein using commercial enzymes (alkaline-AK and papain) during in vitro human digestion by gut microbiota. After the digestion in the large intestine, the stability of the bioactive peptide extracts decreased regardless of their molecular weight. However, the peptides obtained following alkaline-AK treatment were less stable than those obtained following papain digestion. The radical scavenging activities of the peptide extracts also decreased during in vitro human digestion, regardless of the molecular weights of the peptides and the commercial enzymes used. These results indicate that the stability and antioxidative activity of the bioactive peptides were affected by the digestion process by the gut microbiota. This study provides data supporting the changes in the stability and bioavailability of functional materials within the human body.

Discovery of a dual pathway aggregation mechanism for a therapeutic constrained peptide

Constrained peptides (CPs) have emerged as attractive candidates for drug discovery and development. To fully unlock the therapeutic potential of CPs, it is crucial to understand their physical stability and minimize the formation of aggregates that could induce immune responses. Although amyloid like aggregates have been researched extensively, few studies have focused on aggregates from other peptide scaffolds (e.g., CPs). In this work, a streamlined approach to effectively profile the nature and formation pathway of CP aggregates was demonstrated. Aggregates of various sizes were detected and shown to be amorphous. Though no major changes were found in peptide structure upon aggregation, these aggregates appeared to have mixed natures, consisting of primarily non-covalent aggregates with a low level of covalent species. This co-existence phenomenon was also supported by two kinetic pathways observed in time- and temperature-dependent aggregation studies. Furthermore, a stability study with 8 additional peptide variants exhibited good correlation between aggregation propensity and peptide hydrophobicity. Therefore, a dual aggregation pathway was proposed, with the non-covalent aggregates driven by hydrophobic interactions, whereas the covalent ones formed through disulfide scrambling. Overall, the workflow presented here provides a powerful strategy for comprehensive characterization of peptide aggregates and understanding their mechanisms of formation.

Lyophilization Serves as an Effective Strategy for Drug Development of the α9α10 Nicotinic Acetylcholine Receptor Antagonist α-Conotoxin GeXIVA[1,2]

α-Conotoxin GeXIVA[1,2] is a highly potent and selective antagonist of the α9α10 nicotinic acetylcholine receptor (nAChR) subtype. It has the advantages of strong efficacy, no tolerance, and no effect on motor function, which has been expected help patients with neuropathic pain. However, drug development for clinical use is severely limited owing to its instability. Lyophilization is applied as the most preferred method to solve this problem. The prepared lyophilized powder is characterized by differential scanning calorimetry (DSC), powder X-ray diffractometry (PXRD), and Fourier transform infrared spectroscopy (FTIR). Molecular simulation is also used to explore the internal distribution and forces formed in the system. The analgesic effect on paclitaxel-induced neuropathic pain following single and 14-day repeated administrations are evaluated by the von Frey test and the tail-flick test. Trehalose combined with mannitol in a ratio of 1:1 is employed as the excipients in the determined formulation, where trehalose acts as the stabilizer and mannitol acts as the bulking agent, according to the results of DSC, PXRD, and FTIR. Both GeXIVA[1,2] (API) and GeXIVA[1,2] lyophilized powder (formulation) could produce stable analgesic effect. These results indicated that GeXIVA[1,2] lyophilized powder could improve the stability and provide an effective strategy to push it into clinical use as a new analgesic drug.

Aggregation of gelsolin wild-type and G167K/R, N184K, and D187N/Y mutant peptides and inhibition

Gelsolin, an actin-binding protein, is localized intra- and extracellularly in the bloodstream and throughout the body. Gelsolin amyloidosis is a disease characterized by several point mutations that lead to cleavage and fibrillization of gelsolin. The D187 mutation to N or Y leads to aggregation of peptide fragments with shortest aggregating peptide identified as 182SFNNGDCFILD192. Recently, G167 has also been identified as relevant gelsolin mutation, which leads to gelsolin deposits in kidneys, but its aggregation is much less understood. Hence, we systematically investigated in vitro the aggregation propensities of the following gelsolin peptides: 167GRRVV171 (1), 161RLFQVKG167 (2), 184NNGDCFILDL193 (3), 188CFILDL193 (4), 187DCFILDL193 (5), and their respective mutants (G167K, G167R, N184K, D187Y, D187N), by using spectroscopic methods [fluorescence Proteostat, Thioflavin T (ThT), turbidity assay, and Dynamic Light Scattering (DLS)], and Transmission Electron Microscopy (TEM). The (non) mutant peptides containing CFILDL sequence aggregated into fibrillar networks, while G167R mutation promoted aggregation compared to the wild-type sequence. In the presence of inhibitors, Methylene Blue (MB) and epigallocatechin gallate (EGCG), the gelsolin peptide (3-5) aggregation was reduced with the IC50 values in the 2-13 µM range. We discovered that inhibitors have dual functionality, as aggregation inhibitors and disaggregation promoters, potentially allowing for the prevention and reversal of gelsolin amyloidosis. Such therapeutic strategies may improve outcomes related to other amyloidogenic diseases of the heart, brain, and eye.

Robust and sensitive peptidomics workflow for plasma based on specific extraction, lipid removal, capillary LC setup and multinozzle ESI emitter

We present a new workflow for the LC-MS determination of native peptides in plasma at picomolar levels. Collected whole blood was quickly diluted with an ice-cold solution in order to stop protease activity. Diluted plasma samples were extracted by protein denaturation followed by solid-phase-extraction with a polymeric stationary phase that removed most proteins and lipids. Using a specific LC-MS setup with 3 pumps, 240 μL of extracts were injected without drying-reconstitution, a step known to cause peptide losses. After an 18-fold dilution on-line, peptides were trapped on a 1 × 10 mm C8 column, back-flushed and resolved on a 0.3 × 100 mm C18 column. Extract reproducibility, robustness (column clogging), extraction yields, matrix effects, calibration curves and limits of detection were evaluated with plasma extracts and spiked-in standards. The sensitivity and applicability of 3 electrospray sources were evaluated at capillary flow rates (10 μL/min). We show that ionization sources must have a spray angle with the MS orifice when "real" extracts are injected and that a multinozzle emitter can improve very significantly peptide detection. Finally, using our workflow, we have performed a peptidomics study on dried-blood-spots collected over 65 h in a healthy volunteer and discovered 5 fragments (2.9-3.8 KDa) of the protein statherin showing circadian oscillations. This is the first time that statherin is observed in blood where its role clearly deserves further investigations. Our peptidomic protocol shows low picomolar limits of detection and can be readily applied with or without minor modifications for most peptide determinations in various biomatrices.

The role of surfaces on amyloid formation

Interfaces can strongly accelerate or inhibit protein aggregation, destabilizing proteins that are stable in solution or, conversely, stabilizing proteins that are aggregation-prone. Although this behaviour is well-known, our understanding of the molecular mechanisms underlying surface-induced protein aggregation is still largely incomplete. A major challenge is represented by the high number of physico-chemical parameters involved, which are highly specific to the considered combination of protein, surface properties, and solution conditions. The key aspect determining the role of interfaces is the relative propensity of the protein to aggregate at the surface with respect to bulk. In this review, we discuss the multiple molecular determinants that regulate this balance. We summarize current experimental techniques aimed at characterizing protein aggregation at interfaces, and highlight the need to complement experimental analysis with theoretical modelling. In particular, we illustrate how chemical kinetic analysis can be combined with experimental methods to provide insights into the molecular mechanisms underlying surface-induced protein aggregation, under both stagnant and agitation conditions. We summarize recent progress in the study of important amyloids systems, focusing on selected relevant interfaces.

Oral peptide delivery: challenges and the way ahead

Peptides and proteins have emerged as potential therapeutic agents and, in the search for the best treatment regimen, the oral route has been extensively evaluated because of its non-invasive and safe nature. The physicochemical properties of peptides and proteins along with the hurdles in the gastrointestinal tract (GIT), such as degrading enzymes and permeation barriers, are challenges to their delivery. To address these challenges, several conventional and novel approaches, such as nanocarriers, site-specific and stimuli specific delivery, are being used. In this review, we discuss the challenges to the oral delivery of peptides and the approaches used to tackle these challenges.

Nanoelectrical characterization of individual exosomes secreted by Aβ42-ingested cells using electrostatic force microscopy

Quantifying the physical properties of individual exosomes containing amyloid-β₄₂ (Aβ₄₂) is crucial for a better understanding of an underpinning mechanism of Alzheimer's disease expression which is associated with the Aβ₄₂ transfer. Because of the lack of proper tools, however, there have been very few studies on how the amount of Aβ₄₂ affects the physical properties of exosomes. To answer the question, we investigated the physical properties of exosomes secreted by neuroblastoma by probing individual exosomes using electrostatic force microscopy. Interestingly, we observed that when the higher concentration of Aβ₄₂ oligomers was fed to cells, the higher surface charge of the exosomes appeared. This result indicates that the exosomes contain more Aβ₄₂ with the increase in Aβ₄₂ concentration in cell media, implying that they serve as transport vesicles for Aβ₄₂. Our approach could help to better understand how the neuronal exosomes are related to the propagation of neurodegenerative diseases and to seek how to make an early diagnosis of those diseases.

Peptide Nanomaterials for Drug Delivery Applications

Self-assembled peptides have been shown to form well-defined nanostructures which display outstanding characteristics for many biomedical applications and especially in controlled drug delivery. Such biomaterials are becoming increasingly popular due to routine, standardized methods of synthesis, high biocompatibility, biodegradability and ease of upscale. Moreover, one can modify the structure at the molecular level to form various nanostructures with a wide range of applications in the field of medicine. Through environmental modifications such as changes in pH and ionic strength and the introduction of enzymes or light, it is possible to trigger self-assembly and design a host of different self-assembled nanostructures. The resulting nanostructures include nanotubes, nanofibers, hydrogels and nanovesicles which all display a diverse range of physico-chemical and mechanical properties. Depending on their design, peptide self-assembling nanostructures can be manufactured with improved biocompatibility and in vivo stability and the ability to encapsulate drugs with the capacity for sustained drug delivery. These molecules can act as carriers for drug molecules to ferry cargo intracellularly and respond to stimuli changes for both hydrophilic and hydrophobic drugs. This review explores the types of self-assembling nanostructures, the effects of external stimuli on and the mechanisms behind the assembly process, and applications for such technology in drug delivery.

Palmitoylation of Membrane-Penetrating Magainin Derivatives Reinforces Necroptosis in A549 Cells Dependent on Peptide Conformational Propensities

Anticancer lipopeptides (ACLPs) are considered promising alternatives to combat resistant cancer cells, but the influence of peptide conformational propensity alone on their selectivity and mechanism remains obscure. In this study, we developed N-palmitoylated MK5E (P1MK5E) and MEK5 (P1MEK5) that have the same composition of 23 residues undergoing the pH-dependent structural alterations but differ in the conformational tendency of their amino acid composites. Nonlipidated peptides were readily accumulated in the A549 cell nucleus by the direct membrane translocation and the heparan sulfate-mediated endocytosis than the lipid-raft-dependent pathway. The increased hydrophobicity favored the amino acid-position-dependent folding of P1MK5E and P1MEK5, respectively, toward the α-helical coiled-coil nanofibrils and amyloidlike β-protofibrils. At the close concentrations (∼7.5 μM) to the toxic effects of doxorubicin (DOX), P1MK5E exhibited (i) an increased anticancer toxicity through a time-dependent S-phase arrest, (ii) enhanced plasma membrane permeability, and (iii) dose-dependent changes in the cell death characteristic features in the A549 cells relative to P1MEK5 that was almost inactive at ∼75 μM. These observations were in accordance with the TNF-α-mediated necroptotic signaling in the c-MYC/PARP1-overexpressed A549 cells exposed to P1MK5E and accompanied by the ultrastructure of plasma membrane protrusions, extensive endoplasmic reticulum (ER) membrane expansion, mitochondrial swelling, and the formation of distinct cytoplasmic vacuolation. The structural results and the bioactivity behaviors, herein, declared the significance of α-helical propensity in the peptide sequence and the nanostructure morphologies of self-assembling ACLPs upon the selectivity and enhanced anticancer effectiveness, which notably holds promise in the design and development of efficient therapeutics for cancer.

Unravelling neurological disorders through metallomics-based approaches

Understanding the biological process involving metals and biomolecules in the brain is essential for establishing the origin of neurological disorders, such as neurodegenerative and psychiatric diseases. From this perspective, this critical review presents recent advances in this topic, showing possible mechanisms involving the disruption of metal homeostasis and the pathogenesis of neurological disorders. We also discuss the main challenges observed in metallomics studies associated with neurological disorders, including those related to sample preparation and analyte quantification.

Novel High-Throughput Strategy for the Aqueous Solubility Assessment of Peptides and Proteins Exhibiting a Propensity for Gelation: Application to the Discovery of Novel Antibacterial Teixobactin Analogues

A novel high-throughput aqueous solubility assay was developed for peptides and proteins exhibiting a high gelling propensity (in this case, antibacterial teixobactin analogues). By integrating the assessment of gel formation, as indicated by an increase in the solution viscosity, into the peptide equilibrium solubility screening assay, we were able to estimate the "free-flowing solubility", which is defined as the concentration at which the peptide solution not only is fully dissolved but also is a liquid exhibiting ideal flowing characteristics. In this workflow, peptide solutions passing the turbidity assessment were further screened by viscosity measurements based on nanobead-assisted dynamic light scattering analysis in a 96-well plate. The method is able to effectively detect the initiation of peptide gelation and facilitate compound ranking based on their aqueous solubility. The application of such an approach helped confirm that the substitution of Ser₃ in teixobactin led to desired physicochemical improvements and provided a focal point for further chemistry structure-activity relationship exploration.

Fragments of gD Protein as Inhibitors of BTLA/HVEM Complex Formation-Design, Synthesis, and Cellular Studies

One of the major current trends in cancer immunotherapy is the blockade of immune checkpoint proteins that negatively regulate the immune response. This has been achieved through antibodies blocking PD-1/PD-L1 and CTLA-4/CD80/CD86 interactions. Such antibodies have revolutionized oncological therapy and shown a new way to fight cancer. Additional (negative) immune checkpoints are also promising targets in cancer therapy and there is a demand for inhibitors for these molecules. Our studies are focused on BTLA/HVEM complex, which inhibits T-cell proliferation and cytokine production and therefore has great potential as a new target for cancer treatment. The goal of the presented studies was the design and synthesis of compounds able to block BTLA/HVEM interactions. For that purpose, the N-terminal fragment of glycoprotein D (gD), which interacts with HVEM, was used. Based on the crystal structure of the gD/HVEM complex and MM/GBSA analysis performed on it, several peptides were designed and synthesized as potential inhibitors of the BTLA/HVEM interaction. Affinity tests, ELISA tests, and cellular-based reporter assays were performed on these compounds to check their ability to bind to HVEM and to inhibit BTLA/HVEM complex formation. For leading peptides candidates, all-atom and subsequent docking simulations with a coarse-grained force field were performed to determine their binding modes. To further evaluate their potential as drug candidates, their stability in plasma and their cytotoxicity effects on PBMCs were assessed. Our data indicate that the peptide gD(1-36)(K10C-T29C) is the best candidate as a future drug. It interacts with HVEM protein, blocks the BTLA/HVEM interaction, and is nontoxic to cells. The present study provides a new perspective on the development of BTLA/HVEM inhibitors that disrupt protein interactions.

Concentration- and pH-Dependent Oligomerization of the Thrombin-Derived C-Terminal Peptide TCP-25

Peptide oligomerization dynamics affects peptide structure, activity, and pharmacodynamic properties. The thrombin C-terminal peptide, TCP-25 (GKYGFYTHVFRLKKWIQKVIDQFGE), is currently in preclinical development for improved wound healing and infection prevention. It exhibits turbidity when formulated at pH 7.4, particularly at concentrations of 0.3 mM or more. We used biochemical and biophysical approaches to explore whether the peptide self-associates and forms oligomers. The peptide showed a dose-dependent increase in turbidity as well as α-helical structure at pH 7.4, a phenomenon not observed at pH 5.0. By analyzing the intrinsic tryptophan fluorescence, we demonstrate that TCP-25 is more stable at high concentrations (0.3 mM) when exposed to high temperatures or a high concentration of denaturant agents, which is compatible with oligomer formation. The denaturation process was reversible above 100 µM of peptide. Dynamic light scattering demonstrated that TCP-25 oligomerization is sensitive to changes in pH, time, and temperature. Computational modeling with an active 18-mer region of TCP-25 showed that the peptide can form pH-dependent higher-order end-to-end oligomers and micelle-like structures, which is in agreement with the experimental data. Thus, TCP-25 exhibits pH- and temperature-dependent dynamic changes involving helical induction and reversible oligomerization, which explains the observed turbidity of the pharmacologically developed formulation.

A spectroscopic and molecular dynamics study on the aggregation process of a long-acting lipidated therapeutic peptide: the case of semaglutide

The aggregation properties of semaglutide, a lipidated peptide drug agonist of the Glucagon-like peptide 1 receptor recently approved for the treatment of type 2 diabetes, have been investigated by spectroscopic techniques (UV-Vis absorption, steady-state and time-resolved fluorescence, and electronic circular dichroism) and molecular dynamics simulations. We show that in the micromolar concentration region, in aqueous solution, semaglutide is present as monomeric and dimeric species, with a characteristic monomer-to-dimer transition occurring at around 20 μM. The lipid chain stabilizes a globular morphology of the monomer and dimer species, giving rise to a locally well-defined polar outer surface where the lipid and peptide portions are packed to each other. At very long times, these peptide clusters nucleate the growth of larger aggregates characterized by blue luminescence and a β-sheet arrangement of the peptide chains. The understanding of the oligomerization and aggregation potential of peptide candidates is key for the development of long acting and stable drugs.

Predicted aggregation-prone region (APR) in βB1-crystallin forms the amyloid-like structure and induces aggregation of soluble proteins isolated from human cataractous eye lens

The aggregation of β-crystallins in the human eye lens constitutes a critical step during the development of cataract. We anticipated that the presence of Aggregation-Prone Regions (APRs) in their primary structure, which might be responsible for conformational change required for the self-assembly. To examine the presence of APRs, we systematically analyzed the primary structures of β-crystallins. Out of seven subtypes, the βB1-crystallin found to possess the highest aggregation score with 9 APRs in its primary structure. To confirm the amyloidogenic nature of these newly identified APRs, we further studied the aggregation behavior of one of the APRs spanning from 174 to 180 residues (¹⁷⁴LWVYGFS¹⁸⁰) of βB1-crystallin, which is referred as βB1_(174-180). Under in vitro conditions, the synthetic analogue of βB1_(174-180) peptide formed visible aggregates and displayed high Congo red (CR) bathochromic shift, Thioflavin T (ThT) binding and fibrilar morphology under transmission electron microscopy, which are the typical characteristics of amyloids. Further, the aggregated βB1_(174-180) was found to induce aggregation of the soluble fraction of proteins isolated from the human cataractous lens. This observation suggests that the presence of APRs in βB1-crystallin might be serving as one of the intrinsic supplementary factors responsible for constitutive aggregation behavior of βB1-crystallin and development of cataract.

"What Doesn't Kill You Makes You Stronger": Future Applications of Amyloid Aggregates in Biomedicine

Amyloid proteins are linked to the pathogenesis of several diseases including Alzheimer's disease, but at the same time a range of functional amyloids are physiologically important in humans. Although the disease pathogenies have been associated with protein aggregation, the mechanisms and factors that lead to protein aggregation are not completely understood. Paradoxically, unique characteristics of amyloids provide new opportunities for engineering innovative materials with biomedical applications. In this review, we discuss not only outstanding advances in biomedical applications of amyloid peptides, but also the mechanism of amyloid aggregation, factors affecting the process, and core sequences driving the aggregation. We aim with this review to provide a useful manual for those who engineer amyloids for innovative medicine solutions.

Williams G, Brocchini S, Awwad S. Injectables and Depots to Prolong Drug Action of Proteins and Peptides

Proteins and peptides have emerged in recent years to treat a wide range of multifaceted diseases such as cancer, diabetes and inflammation. The emergence of polypeptides has yielded advancements in the fields of biopharmaceutical production and formulation. Polypeptides often display poor pharmacokinetics, limited permeability across biological barriers, suboptimal biodistribution, and some proclivity for immunogenicity. Frequent administration of polypeptides is generally required to maintain adequate therapeutic levels, which can limit efficacy and compliance while increasing adverse reactions. Many strategies to increase the duration of action of therapeutic polypeptides have been described with many clinical products having been developed. This review describes approaches to optimise polypeptide delivery organised by the commonly used routes of administration. Future innovations in formulation may hold the key to the continued successful development of proteins and peptides with optimal clinical properties.

Stability Studies of the Vaccine Adjuvant U-Omp19

Unlipidated outer membrane protein 19 (U-Omp19) is a novel mucosal adjuvant in preclinical development to be used in vaccine formulations. U-Omp19 holds two main properties, it is capable of inhibiting gastrointestinal and lysosomal peptidases, increasing the amount of co-administered antigen that reaches the immune inductive sites and its half-life inside cells, and it is able to stimulate antigen presenting cells in vivo. These activities enable U-Omp19 to enhance the adaptive immune response to co-administrated antigens.

To characterize the stability of U-Omp19 we have performed an extensive analysis of its physicochemical and biological properties in a 3-year long-term stability study, and under potentially damaging freeze-thawing and lyophilization stress processes. Results revealed that U-Omp19 retains its full protease inhibitor activity, its monomeric state and its secondary structure even when stored in solution for 36 months or after multiple freeze-thawing cycles. Non-enzymatic hydrolysis resulted the major degradation pathway for storage in solution at 4 °C or room temperature which can be abrogated by lyophilization yet increasing protein tendency to form aggregates.

This information will play a key role in the development of a stable formulation of U-Omp19, allowing an extended shelf-life during manufacturing, storage, and shipping of a future vaccine containing this pioneering adjuvant.

The Reversible Non-covalent Aggregation Into Fibers of PGLa and Magainin 2 Preserves Their Antimicrobial Activity and Synergism

Magainin 2 and PGLa are antimicrobial peptides found together in frog skin secretions. When added as a mixture they show an order of magnitude increase in antibacterial activity and in model membrane permeation assays. Here we demonstrate that both peptides can form fibers with beta-sheet/turn signature in ATR-FTIR- and CD-spectroscopic analyses, but with different morphologies in EM images. Whereas, fiber formation results in acute reduction of the antimicrobial activity of the individual peptides, the synergistic enhancement of activity remains for the equimolar mixture of PGLa and magainin 2 also after fibril formation. The biological significance and potential applications of such supramolecular aggregates are discussed.

Antimicrobial Excipient-Induced Reversible Association of Therapeutic Peptides in Parenteral Formulations

New classes of therapeutic peptides are being developed to prosecute biological targets which have been inaccessible to other modalities. Higher potency and longer half-life peptides have given rise to multiuse injectable formulations that enable convenient, low volume, and self-administered dosing; however, inclusion of antimicrobial preservatives to meet bactericidal requirements can impact other attributes of peptide formulations. Peptide-preservative interactions influencing solution-phase self-association of a non-insulin, linear, palmitoylated 31 amino acid peptide and two structurally similar peptides were assessed via turbidity, intrinsic fluorescence shifts and quenching, isothermal titration calorimetry, and ¹H NMR. Meta-cresol and phenol specifically interact with the peptide, result in increased hydrophobicity near the tryptophan residue, and induce conformational changes, while benzyl alcohol does not impact tryptophan fluorescence, demonstrate any interaction enthalpy, or induce conformational changes. These same trends did not hold true for the other palmitoylated peptides evaluated, reinforcing the impacts of unique peptide sequences. Importantly, the presence of benzyl alcohol does increase the physical stability and solubility of the linear, 31 amino acid peptide under salt stress. We report new insights into the physical interactions of peptides with antimicrobial excipients, demonstrating a reversible association phenomenon and highlighting practical implications for formulation design and excipient selection.