Inverse iron oxide/metal catalysts from galvanic replacement

Key chemical transformations require metal and redox sites in proximity at interfaces; however, in traditional oxide-supported materials, this requirement is met only at the perimeters of metal nanoparticles. We report that galvanic replacement can produce inverse FeO_x/metal nanostructures in which the concentration of oxide species adjoining metal domains is maximal. The synthesis involves reductive deposition of rhodium or platinum and oxidation of Fe²⁺ from magnetite (Fe₃O₄). We discovered a parallel dissolution and adsorption of Fe²⁺ onto the metal, yielding inverse FeO_x-coated metal nanoparticles. This nanostructure exhibits the intrinsic activity in selective CO₂ reduction that simple metal nanoparticles have only at interfaces with the support. By enabling a simple way to control the surface functionality of metal particles, our approach is not only scalable but also enables a versatile palette for catalyst design.

While typical catalysts involve oxide-supported metals, inverse catalysts of oxides on metal supports offer an attractive alternative. Here, authors prepare FeO_x-coated Rh nanoparticles via galvanic replacement and dissolution-precipitation to form effective CO₂ reduction catalysts.

Selective immobilization of single-atom Au on cerium dioxide for low-temperature removal of C1 gaseous contaminants

Selective immobilization of single-atom Au on the specific facets of CeO₂ has been successfully performed by redox etching precipitation (REP), which makes it possible to clearly refine the interfacial effect of multiple-facet support on single atom. With systemic characterizations, it is found that single-atom Au is apt to lie on nonpolar facets of CeO₂ (111) and (110) rather than polar facet of CeO₂ (100). The modification of morphology-dependent properties is attributed to the different interaction between Au atom and each CeO₂ interface. Because of synergy between Au and CeO₂, more oxygen vacancies and more active oxygen species are generated; meanwhile, the interfacial effect stabilizes the charged Au species which serves as active site. Therefore, the performance in catalytic oxidation of HCHO and CO on CeO₂ is facilitated by loading Au. Among them, CeO₂ rod-supported Au as an optimal catalyst exhibits a remarkable activity and stability. With in-situ characterization, the reaction mechanisms for HCHO and CO oxidation over Au/r-CeO₂ are studied. Meanwhile, it is proved that REP strategy is also valid to obviously promote catalytic performance whenever commercial CeO₂ is used or Au is replaced with Ag, so the improvement of recently applied catalyst with REP process is promising.

SO2-Tolerant Catalytic Removal of Soot Particles over 3D Ordered Macroporous Al2O3-Supported Binary Pt-Co Oxide Catalysts

The catalytic purification of soot particles is dependent on the SO₂ tolerance and activity of the catalysts in practical application. Herein, we have elaborately fabricated the nanocatalysts of three-dimensionally ordered macroporous (3DOM) Al₂O₃-supported binary Pt-cobalt oxide nanoparticles (NPs) using the method of gas bubbling-assisted membrane precipitation (GBMP), abbreviated as Pt-CoO_x/3DOM-Al₂O₃. Three-dimensionally ordered macroporous Al₂O₃ support can not only improve the contact performance between the soot and active sites but also possess surface acidity to improve the SO₂ tolerance. Supported binary Pt-CoO_x NPs over 3DOM-Al₂O₃ have high-efficient properties for activating NO and O₂. The Pt-CoO_x/3DOM-Al₂O₃ catalyst exhibits super catalytic performance and SO₂ tolerance during the removal of soot particles, whose values of turnover frequency (TOF) and T₅₀ are 0.29 h^-1 and 368 °C, respectively. The catalytic and SO₂-tolerant mechanisms of the Pt-CoO_x/3DOM-Al₂O₃ catalyst for soot purification are systematically studied by in situ diffuse reflectance infrared Fourier transform (DRIFT) spectra. The synergistic effect of binary Pt-CoO_x NPs plays a vital role in the oxidation of NO to NO₂ as a key step during catalytic soot removal, and the surface acidity of 3DOM-Al₂O₃ can not only inhibit the adsorption of SO₂ but also enhance the decomposition of surface hydrosulfate species. This work provides a novel strategy to the development of high-efficient catalysts for SO₂-tolerant catalytic removal of soot particles in both fundamental research and practical applications.

Tuning the activities of cuprous oxide nanostructures via the oxide-metal interaction

Despite tremendous importance in catalysis, the design of oxide-metal interface has been hampered by the limited understanding of the nature of interfacial sites and the oxide-metal interaction (OMI). Through construction of well-defined Cu₂O/Pt, Cu₂O/Ag and Cu₂O/Au interfaces, we find that Cu₂O nanostructures (NSs) on Pt exhibit much lower thermal stability than on Ag and Au, although they show the same structure. The activities of these interfaces are compared for CO oxidation and follow the order of Cu₂O/Pt > Cu₂O/Au > Cu₂O/Ag. OMI is found to determine the activity and stability of supported Cu₂O NSs, which could be described by the formation energy of interfacial oxygen vacancy. Further, electronic interaction between Cu⁺ and metal substrates is found center to OMI, where the d band center could be used as a key descriptor. Our study provides insight for OMI and for the development of Cu-based catalysts for low temperature oxidation reactions.

The design of oxide-metal interface for heterogeneous catalysis has been hampered by the limited fundamental understanding. Here, the authors demonstrate that the activities of cuprous oxide nanostructures for CO oxidation can be tuned via the oxide-metal (Cu2O/M, M = Pt, Ag, Au) interaction.

Surrounded catalysts prepared by ion-exchange inverse loading

The supported catalyst featuring highly dispersed active phase on support is the most important kind of industrial catalyst. Extensive research has demonstrated the critical role (in catalysis) of the interfacial interaction/perimeter sites between the active phase and support. However, the supported catalyst prepared by traditional methods generally presents low interface density because of limit contact area. Here, an ion-exchange inverse loading (IEIL) method has been developed, in which the precursor of support is controllably deposited onto the precursor of active phase by ion-exchange reaction, leading to an active core surrounded (by support) catalyst with various structures. The unique surrounded structure presents not only high interface density and mutually changed interface but also high stability due to the physical isolation of active phase, revealing superior catalytic performances to the traditional supported catalysts, suggesting the great potential of this new surrounded catalyst as the upgrade of supported catalyst in heterogeneous catalysis.

Chemical Synthesis of Single Atomic Site Catalysts

Manipulating metal atoms in a controllable way for the synthesis of materials with the desired structure and properties is the holy grail of chemical synthesis. The recent emergence of single atomic site catalysts (SASC) demonstrates that we are moving toward this goal. Owing to the maximum efficiency of atom-utilization and unique structures and properties, SASC have attracted extensive research attention and interest. The prerequisite for the scientific research and practical applications of SASC is to fabricate highly reactive and stable metal single atoms on appropriate supports. In this review, various synthetic strategies for the synthesis of SASC are summarized with concrete examples highlighting the key issues of the synthesis methods to stabilize single metal atoms on supports and to suppress their migration and agglomeration. Next, we discuss how synthesis conditions affect the structure and catalytic properties of SASC before ending this review by highlighting the prospects and challenges for the synthesis as well as further scientific researches and practical applications of SASC.

Metal-free activation of molecular oxygen by covalent triazine frameworks for selective aerobic oxidation

Oxygen activation is a critical step in ubiquitous heterogeneous oxidative processes, most prominently in catalysis, electrolysis, and pharmaceutical applications. We present here our findings on metal-free O2 activation on covalent triazine frameworks (CTFs) as an important class of N-rich materials. The O2 activation process was studied for the formation of aldehydes, ketones and imines. A detailed mechanistic study of O2 activation and the role of nitrogen heteroatoms were comprehensively investigated. The electron paramagnetic resonance (EPR) and control experiments provide strong evidence for the reaction mechanism proving the applicability of the CTFs to activate oxygen into superoxide species. This report highlights the importance of a self-templating procedure to introduce N functionalities for the development of metal-free catalytic materials. The presented findings reveal an important step toward the use of CTFs as inexpensive and high-performance alternatives to metal-based materials not only for catalysis but also for biorelated applications dealing with O2 activation.

Structure of two-dimensional Fe3O4

We have investigated the structure of an ultrathin iron oxide phase grown on Ag(100) using surface x-ray diffraction in combination with Hubbard-corrected density functional theory (DFT+U) calculations. The film exhibits a novel structure composed of one close-packed layer of octahedrally coordinated Fe²⁺ sandwiched between two close-packed layers of tetrahedrally coordinated Fe³⁺ and an overall stoichiometry of Fe₃O₄. As the structure is distinct from bulk iron oxide phases and the coupling with the silver substrate is weak, we propose that the phase should be classified as a metastable two-dimensional oxide. The chemical and physical properties are potentially interesting, thanks to the predicted charge ordering between atomic layers, and analogy with bulk ferrite spinels suggests the possibility of synthesis of a whole class of two-dimensional ternary oxides with varying electronic, optical, and chemical properties.

Synergism of Iron and Platinum Species for Low-Temperature CO Oxidation: From Two-Dimensional Surface to Nanoparticle and Single-Atom Catalysts

CO oxidation is one of the most studied reactions in heterogeneous catalysis. It is present in air cleaning and automotive emission control. It also participates in the removal of CO from streams of hydrogen used in fuel cells. Because of the competitive adsorption of CO and O₂ over active sites, the use of Pt-based catalysts for low-temperature CO oxidation remains a challenge. Recently, great progress has been made with catalysts containing Pt-Fe species because of the contribution of Fe species to O₂ activation. The structure-activity relationship and reaction mechanisms have been investigated with various Pt-Fe catalysts. In this Perspective, we give a summary of the recent advances of low-temperature CO oxidation over Pt-Fe catalysts with a focus on the synergistic effect of Pt and Fe species in the CO and O₂ activation of catalytic reactions. Future prospects for the preparation of highly effective Pt-Fe catalysts are also proposed.

Chapter model systems in heterogeneous catalysis at the atomic level: a personal view

The review presents an overview of studies in the surface science of oxide and related surfaces with an emphasis of the studies performed in the authors’ group. Novel instruments and technique developments, as well as their applications are reported, in an attempt to cover studies on model systems of increasing complexity, including some of the key ingredients of an industrially applied heterogeneous catalyst and its fabrication. The review is intended to demonstrate the power of model studies in understanding heterogeneous catalysis at the atomic level. The studies include those on supported nano-particles, both, prepared in vacuum and from solution, interaction of surfaces and the underlying bulk with molecules from the gas phase, strong metal support interaction, as well as the first attempt to include studies on reactions in confined spaces.

A Photoactivated Cu-CeO2 Catalyst with Cu-[O]-Ce Active Species Designed through MOF Crystal Engineering

Fully utilizing solar energy for catalysis requires the integration of conversion mechanisms and therefore delicate design of catalyst structures and active species. Herein, a MOF crystal engineering method was developed to controllably synthesize a copper-ceria catalyst with well-dispersed photoactive Cu-[O]-Ce species. Using the preferential oxidation of CO as a model reaction, the catalyst showed remarkably efficient and stable photoactivated catalysis, which found practical application in feed gas treatment for fuel cell gas supply. The coexistence of photochemistry and thermochemistry effects contributes to the high efficiency. Our results demonstrate a catalyst design approach with atomic or molecular precision and a combinatorial photoactivation strategy for solar energy conversion.

Reversible oxidation and reduction of gold-supported iron oxide islands at room temperature

Monolayer iron oxides grown on metal substrates have widely been used as model systems in heterogeneous catalysis. By means of ambient-pressure scanning tunneling microscopy (AP-STM), we studied the in situ oxidation and reduction of FeO(111) grown on Au(111) by oxygen (O₂) and carbon monoxide (CO), respectively. Oxygen dislocation lines present on FeO islands are highly active for O₂ dissociation. X-ray photoelectron spectroscopy measurements distinctly reveal the reversible oxidation and reduction of FeO islands after sequential exposure to O₂ and CO. Our AP-STM results show that excess O atoms can be further incorporated on dislocation lines and react with CO, whereas the CO is not strong enough to reduce the FeO supported on Au(111) that is essential to retain the activity of oxygen dislocation lines.

In situ observations of the structural dynamics of platinum-cobalt-hydroxide nanocatalysts under CO oxidation

The structures, compositions and chemical states of metal catalysts are prone to dynamic changes in response to reaction conditions. In this work, a combination of in situ X-ray absorption fine structure spectroscopy and diffuse reflectance infrared Fourier transform spectroscopy has been used to monitor the temperature-dependent structural dynamics in bimetallic Pt-Co(OH)₂ nanocatalysts during CO oxidation. Alloying with electron-donating Co promotes the catalytic activity of metallic Pt for CO oxidation at low temperature. At elevated temperatures under an oxidation atmosphere, O₂ drives the segregation of the Pt-Co alloy into cobalt oxide and platinum metal, with the extent of alloying sharply decreasing from ∼30% at 300 K to 0 at 473 K. Reduction at high temperature could recover the formation of the Pt-Co alloy with the same alloying extent. The observed structural dynamics could be well correlated with the kinetic behavior of the catalysts. This work highlights the importance of tracking the dynamic structural changes of working catalysts for a correct understanding of their catalytic behavior.

Two-Dimensional Electrocatalysts for Efficient Reduction of Carbon Dioxide

Two-dimensional (2D) materials are attractive catalysts for the electrochemical reduction of carbon dioxide reaction (eCO₂ RR) by virtue of their tunable atomic structures, abundant active sites, enhanced conductivity, suitable binding affinity to carbon dioxide and/or reaction intermediates, and intrinsic scalability. Herein, recent advances in 2D catalysts for the eCO₂ RR are reviewed. Structural features and properties of 2D materials that contribute to their advanced electrocatalytic properties are summarized, and strategies for enhancing their activity and selectivity for the eCO₂ RR are reviewed. Prospects and challenges of applications of 2D catalysts for the eCO₂ RR on an industrial scale are highlighted.

Efficient Cu catalyst for 5-hydroxymethylfurfural hydrogenolysis by forming Cu–O–Si bonds

Strong covalent bonding (Cu–O–Si) modulates the Cu status and boosts the C–O hydrogenolysis.

Highly efficient Cu(ii)-pyrazoledicarboxylate heterogeneous catalysts for a base-free aerobic oxidation of benzylic alcohol to benzaldehyde with hydrogen peroxide as the oxidant

A Cu(ii)-pyrazoledicarboxylate MOF displayed high activity and selectivity in the base-free oxidation of benzyl alcohol to benzaldehyde combined with H₂O₂.

Large-Scale Synthesis of Strain-Tunable Semiconducting Antimonene on Copper Oxide

Controlled synthesis of 2D structures on nonmetallic substrate is challenging, yet an attractive approach for the integration of 2D systems into current semiconductor technologies. Herein, the direct synthesis of high-quality 2D antimony, or antimonene, on dielectric copper oxide substrate by molecular beam epitaxy is reported. Delicate scanning tunneling microscopy imaging on the evolution intermediates reveals a segregation growth process on Cu₃ O₂ /Cu(111), from ordered dimer chains to packed dot arrays, and finally to monolayer antimonene. First-principles calculations demonstrate the strain-modulated band structures in antimonene, which interacts weakly with the oxide surface so that its semiconducting nature is preserved, in perfect agreement with spectroscopic measurements. This work paves the way for large-scale growth and processing of antimonene for practical implementation.

N-Promoted Ru1/TiO2 single-atom catalysts for photocatalytic water splitting for hydrogen production: a density functional theory study

In our Ru₁–N₁/TiO₂ single-atom catalyst system, isolated Ru₁ atoms act as active sites for the reduction of protons, and the TiO₂ support offers the photogenerated carriers, allowing for a hydrogen evolution activity comparable to that of Pd.

Selective hydrogenation of cinnamaldehyde over magnetic flower-like carbonaceous Pd catalysts

Novel magnetic flower-like carbonaceous Pd catalysts are constructed for the selective hydrogenation of the CC bond.

Atomic-scale engineering of metal–oxide interfaces for advanced catalysis using atomic layer deposition

Two main routes to optimization of metal–oxide interfaces: reducing metal particle size and oxide overcoating.

Strong metal–support interactions between palladium nanoclusters and hematite toward enhanced acetylene dicarbonylation at low temperature

A four-fold increase in palladium-based acetylene dicarbonylation activity was obtained at low temperature due to the strong metal–support interaction between Pd and the earth-abundant α-Fe₂O₃ material.

Asymmetric Oxygen Vacancies: the Intrinsic Redox Active Sites in Metal Oxide Catalysts

To identify the intrinsic active sites in oxides or oxide supported catalysts is a research frontier in the fields of heterogeneous catalysis and material science. In particular, the role of oxygen vacancies on the redox properties of oxide catalysts is still not fully understood. Herein, some relevant research dealing with M1-O-M2 or M1-□-M2 linkages as active sites in mixed oxides, in oxide supported single-atom catalysts, and at metal/oxide interfaces of oxide supported nanometal catalysts for various reaction systems is reviewed. It is found that the catalytic activity of these oxides not only depends on the amounts of oxygen vacancies and metastable cations but also shows a significant influence from the local environment of the active sites, in particular, the symmetry of the oxygen vacancies. Based on the recent progress in the relevant fields, an "asymmetric oxygen vacancy site" is introduced, which indicates an oxygen vacancy with an asymmetric coordination of cations, making oxygen "easy come, easy go," i.e., more reactive in redox reactions. The establishment of this new mechanism would shed light on the future investigation of the intrinsic active sites in oxide and oxide supported catalysts.

Well-Defined Materials for Heterogeneous Catalysis: From Nanoparticles to Isolated Single-Atom Sites

The use of well-defined materials in heterogeneous catalysis will open up numerous new opportunities for the development of advanced catalysts to address the global challenges in energy and the environment. This review surveys the roles of nanoparticles and isolated single atom sites in catalytic reactions. In the second section, the effects of size, shape, and metal-support interactions are discussed for nanostructured catalysts. Case studies are summarized to illustrate the dynamics of structure evolution of well-defined nanoparticles under certain reaction conditions. In the third section, we review the syntheses and catalytic applications of isolated single atomic sites anchored on different types of supports. In the final part, we conclude by highlighting the challenges and opportunities of well-defined materials for catalyst development and gaining a fundamental understanding of their active sites.

Electronic Metal-Support Interaction-Modified Structures and Catalytic Activity of CeOx Overlayers in CeOx /Ag Inverse Catalysts

Electronic metal-support interactions (EMSIs) of oxide-supported metal catalysts strongly modifies the electronic structures of the supported metal nanoparticles. The strong influence of EMSIs on the electronic structures of oxide overlayers on metal nanoparticles employing cerium oxides/Ag inverse catalysts is reported herein. Ce₂ O₃ overlayers were observed to exclusively form on Ag nanocrystals at low cerium loadings and be resistant to oxidation treatments up to 250 °C, whereas CeO₂ overlayers gradually developed as the cerium loading increased. Ag cubes enclosed by {001} facets with a smaller work function exert a stronger EMSI effect on the CeO_x overlayers than Ag cubes enclosed by {111} facets. Only the CeO₂ overlayers with a fully developed bulk CeO₂ electronic structure significantly promote the catalytic activity of Ag nanocrystals in CO oxidation, whereas cerium oxide overlayers with other electronic structures do not. These results successfully extend the concept of EMSIs from oxide-supported metal catalysts to metal-supported oxide catalysts.

Interface-confined triangular FeOx nanoclusters on Pt(111)

Under the oxidizing condition, the cheap metal component of bimetallic catalysts often segregates to the surface and forms oxide nanoclusters (NCs) supported on the metal surface, which exhibit unique structures and catalytic properties drastically different from the corresponding bulk materials. Here, density functional theory calculations are employed to describe the atomic and electronic structures of a series of triangular FeO_x NCs confined on Pt(111) with the size ranging from ∼0.3 nm to ∼2.2 nm, which behave differently from the FeO film reported previously. The lattice of supported FeO_x NCs on Pt(111) is found to vary not only with the NC size but also with the Fe/O ratio or the edge termination. Owing to a strong FeO_x-Pt interaction, the heterogeneous distribution of local atomic and electronic structures of Fe across the FeO_x NC is observed, though most of Fe atoms are positioned at the threefold hollow site of Pt(111). Our study not only sheds light on the catalytically active sites of supported FeO_x NCs but also provides guidance for the design of highly active and stable oxide nanocatalysts under reactive environment.

Confinement Catalysis with 2D Materials for Energy Conversion

The unique electronic and structural properties of 2D materials have triggered wide research interest in catalysis. The lattice of 2D materials and the interface between 2D covers and other substrates provide intriguing confinement environments for active sites, which has stimulated a rising area of "confinement catalysis with 2D materials." Fundamental understanding of confinement catalysis with 2D materials will favor the rational design of high-performance 2D nanocatalysts. Confinement catalysis with 2D materials has found extensive applications in energy-related reaction processes, especially in the conversion of small energy-related molecules such as O₂ , CH₄ , CO, CO₂ , H₂ O, and CH₃ OH. Two representative strategies, i.e., 2D lattice-confined single atoms and 2D cover-confined metals, have been applied to construct 2D confinement catalytic systems with superior catalytic activity and stability. Herein, the recent advances in the design, applications, and structure-performance analysis of two 2D confinement catalytic systems are summarized. The different routes for tuning the electronic states of 2D confinement catalysts are highlighted and perspectives on confinement catalysis with 2D materials toward energy conversion and utilization in the future are provided.

Quinary Defect-Rich Ultrathin Bimetal Hydroxide Nanosheets for Water Oxidation

The electronic structure of layered double hydroxides (LDHs) can be modulated by heteroatom doping and creating vacancies. The number of exposed active sites can be enriched by exfoliating the bulk structure into fewer layers. Herein, we successfully achieved multielement doping and exfoliation for Co₃Fe LDHs by one SF₆-plasma etching step at room temperature (named as Co₃Fe LDHs-SF₆). The obtained Co₃Fe LDHs-SF₆ ultrathin nanosheets display outstanding oxygen evolution reaction (OER) activity, which only needs 268 mV overpotential to reach 10 mA cm^-2. Tafel slope and charge transfer resistance are dramatically decreased indicating a faster reaction kinetic rate. The excellent OER activity can be attributed to an increased number of active sites and an optimized electronic structure modulated by the incorporation of electron-withdrawing F, electron-donating S, and abundant vacancies resulting in proper adsorption energy to oxygen species.

Atomic-Scale View of the Oxidation and Reduction of Supported Ultrathin FeO Islands

By means of scanning tunneling microscopy (STM) measurements, we studied in situ the oxidation and reduction of FeO bilayer islands on Au(111) by oxygen (O₂) and hydrogen (H₂), respectively. The FeO islands respond very dynamically toward O₂, with the coordinatively unsaturated ferrous (CUF) sites at the island edges being essential for O₂ dissociation and O atom incorporation. An STM movie obtained during oxidation reveals how further O₂ molecules can dissociate after the consumption of all initially existing CUF sites through the formation of new CUF sites. In contrast, we found that H₂ molecules only dissociate when vibrationally excited through the ion gauge and only at the basal plane of FeO islands, implying that the CUF sites are not relevant for H₂ dissociation. Our STM results reveal how excess O atoms are incorporated and released in O₂ and H₂ and thus shed light onto the stability of inverse catalysts during a catalyzed reaction.

Unraveling the coordination structure-performance relationship in Pt1/Fe2O3 single-atom catalyst

Heterogeneous single-atom catalyst (SAC) opens a unique entry to establishing structure–performance relationship at the molecular level similar to that in homogeneous catalysis. The challenge lies in manipulating the coordination chemistry of single atoms without changing single-atom dispersion. Here, we develop an efficient synthetic method for SACs by using ethanediamine to chelate Pt cations and then removing the ethanediamine by a rapid thermal treatment (RTT) in inert atmosphere. The coordination chemistry of Pt single atoms on a Fe₂O₃ support is finely tuned by merely adjusting the RTT temperature. With the decrease in Pt-O coordination number, the oxidation state of Pt decreases, and consequently the hydrogenation activity increases to a record level without loss of chemoselectivity. The tunability of the local coordination chemistry, oxidation states of the metal, and the catalytic performance of single atoms reveals the unique role of SACs as a bridge between heterogeneous and homogeneous catalysis.

In single-atom catalysts (SACs), little is known about how the coordination structure of single atoms affects the catalytic performance. Here, the authors discover that in Pt₁/Fe₂O₃ SAC, the coordination number of the first shell Pt-O is well correlated with the Pt electronic property and the hydrogenation activity.

Remarkable active-site dependent H2O promoting effect in CO oxidation

The interfacial sites of supported metal catalysts are often critical in determining their performance. Single-atom catalysts (SACs), with every atom contacted to the support, can maximize the number of interfacial sites. However, it is still an open question whether the single-atom sites possess similar catalytic properties to those of the interfacial sites of nanocatalysts. Herein, we report an active-site dependent catalytic performance on supported gold single atoms and nanoparticles (NPs), where CO oxidation on the single-atom sites is dramatically promoted by the presence of H₂O whereas on NPs’ interfacial sites the promoting effect is much weaker. The remarkable H₂O promoting effect makes the Au SAC two orders of magnitude more active than the commercial three-way catalyst. Theoretical studies reveal that the dramatic promoting effect of water on SACs originates from their unique local atomic structure and electronic properties that facilitate an efficient reaction channel of CO + OH.

The issue that whether single-atom sites possess similar catalytic properties to the interfacial sites of nanocatalysts remains unresolved. Here, the authors demonstrate a large H₂O promotional effect on CO oxidation over Au single-atom sites due to their unique local atomic structure and electronic properties.

Spectroscopy Identification of the Bimetallic Surface of Metal-Organic Framework-Confined Pt-Sn Nanoclusters with Enhanced Chemoselectivity in Furfural Hydrogenation

Research and development in bimetallic nanoparticles have gained great interest over their monometallic counterparts because of their distinct and unique properties in a wide range of applications such as catalysis, energy storage, and bio/plasmonic imaging. Identification and characterization of these bimetallic surfaces for application in heterogeneous catalysis remain a challenge and heavily rely on advanced characterization techniques such as aberration-corrected electron microscopy and synchrotron X-ray absorption studies. In this article, we have reported a strategy to prepare sub-2 nm bimetallic Pt-Sn nanoclusters confined in the pores of a Zr-based metal-organic framework (MOF). The Pt-Sn nanoclusters encapsulated in the Zr-MOF pores show enhanced chemoselectivity from 51 to 93% in an industrially relevant reaction, furfural hydrogenation to furfuryl alcohol. The presence of bimetallic Pt-Sn surfaces was investigated by a surface-sensitive characterization technique utilizing diffuse reflectance infrared Fourier transform spectroscopy of adsorbed CO to probe the bimetallic surface of the encapsulated ultrafine Pt-Sn nanocluster. Complementary techniques such as aberration-corrected high-angle annular dark-field scanning transmission electron microscopy with energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy were also used to characterize the Pt-Sn nanoclusters.

In situ redox growth of mesoporous Pd-Cu2O nanoheterostructures for improved glucose oxidation electrocatalysis

Interfaces of metal-oxide heterostructured electrocatalyst are critical to their catalytic activities due to the significant interfacial effects. However, there are still obscurities in the essence of interfacial effects caused by crystalline defects and mismatch of electronic structure at metal-oxide nanojunctions. To deeply understand the interfacial effects, we engineered crystalline-defect Pd-Cu₂O interfaces through non-epitaxial growth by a facile redox route. The Pd-Cu₂O nanoheterostructures exhibit much higher electrocatalytic activity toward glucose oxidation than their single counterparts and their physical mixture, which makes it have a promising potential for practical application of glucose biosensors. Experimental study and density functional theory (DFT) calculations demonstrated that the interfacial electron accumulation and the shifting up of d bands center of Cu-Pd toward the Fermi level were responsible for excellent electrocatalytic activity. Further study found that Pd(3 1 0) facets exert a strong metal-oxide interface interaction with Cu₂O(1 1 1) facets due to their lattice mismatch. This leads to the sinking of O atoms and protruding of Cu atoms of Cu₂O, and the Pd crystalline defects, further resulting in electron accumulation at the interface and the shifting up of d bands center of Cu-Pd, which is different from previously reported charge transfer between the interfaces. Our findings could contribute to design and development of advanced metal-oxide heterostructured electrocatalysts.

Spherical Sandwich Au@Pd@UIO-67/Pt@UIO- n ( n = 66, 67, 69) Core-Shell Catalysts: Zr-Based Metal-Organic Frameworks for Effectively Regulating the Reverse Water-Gas Shift Reaction

In this study, spherical sandwich Au@Pd@UIO-67/Pt@UIO- n ( n = 66, 67, 69) core-shell catalysts were assembled. Au nanoparticles (NPs) were used as the core for the epitaxial growth of Pd shells, and Au@Pd core-shell NPs were successfully encapsulated in the center of monodispersed Au@Pd@UIO-67 nanospheres. Pt NPs were fully fixed onto the nanosphere surfaces to obtain Au@Pd@UIO-67/Pt composites; further coating with UIO- n led to Au@Pd@UIO-67/Pt@UIO- n, in which Pt NPs are sandwiched between the Au@Pd@UIO-67 core and the UIO- n shell. The Au@Pd core-shell NPs efficiently controlled the morphology and structure of UIO-67 and enhanced the CO selectivity of the catalyst. Pt NPs increased the CO₂ conversion, and the UIO- n component effectively regulated the reverse water-gas shift reaction.

Cu2O-Supported Atomically Dispersed Pd Catalysts for Semihydrogenation of Terminal Alkynes: Critical Role of Oxide Supports

Atomically dispersed catalysts have demonstrated superior catalytic performance in many chemical transformations. However, limited success has been achieved in applying oxide-supported atomically dispersed catalysts to semihydrogenation of alkynes under mild conditions. By utilizing various metal oxides (e.g., Cu2O, Al2O3, ZnO, and TiO2) as supports for atomically dispersed Pd catalysts, we demonstrate herein the critical role of the oxidation state and coordinate environment of Pd centers in their catalytic performance, thus leading to the discovery of an “oxide-support effect” on atomically dispersed metal catalysts. Pd atomically dispersed on Cu2O exhibits far better catalytic activity in the hydrogenation of alkynes, with an extremely high selectivity toward alkenes, compared to catalysts on other oxides. Pd species galvanically displace surface Cu(I) sites on Cu2O to create two-coordinated Pd(I), which is a critical step for the activation and heterolytic splitting of H2 into Pd-H− and O-H+ species for the selective hydrogenation of alkynes. Moreover, the adsorption of alkenes on H2-preadsorbed Pd(I) is relatively weak, preventing deeper hydrogenation and increased selectivity during semihydrogenation. We demonstrate that the local coordinate environment of active metal centers plays a crucial role in determining the catalytic performance of an oxide-supported atomically dispersed catalyst.