Streptavidin–biotin technology: improvements and innovations in chemical and biological applications

Biotin interference: evaluation of a new generation of electrochemiluminescent immunoassays for high-sensitive troponin T and thyroid-stimulating hormone testing

Background

Biotin is currently a matter of concern for laboratories using biotin-streptavidin-based immunoassays. Biotin interferences have been reported for high-sensitive troponin T (hsTnT) and thyroid-stimulating hormone (TSH) assays. We aimed to evaluate the new generation of hsTnT and TSH electrochemiluminescent immunoassays announced to be less sensitive to biotin.

Methods

Firstly, we assessed the analytical performances of new generation assays (imprecision, bias, total error, limit of quantification) and compared previous and new generation assays in the absence of biotin. Secondly, we challenged both generations of assays with samples spiked with seven different biotin levels. The efficiency of new generation assays was also compared to the streptavidin beads treatment.

Results

New generation assays presented suitable analytical performances. Previous and new generations of hsTnT and TSH assays were commutable in the absence of biotin. In the presence of biotin, we confirmed that previous generation assays were affected by biotin concentration as low as 40.5 ng/mL and that new generation assays were not affected up to the announced tolerance threshold of 1200 ng/mL. After the streptavidin beads treatment, we observed a higher imprecision for both parameters and a constant 10% negative bias for TSH compared to new generation assays.

Conclusions

New generation of electrochemiluminescent immunoassays appears as a reliable systematic solution to prevent biotin interference for hsTnT and TSH testing.

Rapid detection of Group B Streptococcus (GBS) from artificial urine samples based on IFAST and ATP bioluminescence assay: from development to practical challenges during protocol testing in Kenya

We report the rapid detection (20 min) of Streptococcus agalactiae, Group B Streptococcus (GBS) employing on-chip magnetic isolation of GBS based on immiscible filtration assisted by surface tension (IFAST), followed by detection of the isolated GBS using an adenosine triphosphate (ATP) bioluminescence assay. Up to 80% GBS cells were isolated from spiked artificial urine samples with linear responses of bioluminescence signals from isolated cells at 2.3 × 102-9.1 × 105 CFU mL-1, demonstrating great promise for point-of-care detection of pathogenic bacteria in screening urine samples from pregnant women. Practical challenges during initial testing of the developed protocol with urine samples in Kenya are also described.

PapG subtype-specific binding characteristics of Escherichia coli towards globo-series glycosphingolipids of human kidney and bladder uroepithelial cells

Uropathogenic Escherichia coli (UPEC) are the primary cause of urinary tract infections (UTIs) in humans. P-fimbriae are key players for bacterial adherence to the uroepithelium through the Galα1-4Gal-binding PapG adhesin. The three identified classes I, II and III of PapG are supposed to adhere differently to host cell glycosphingolipids (GSLs) of the uroepithelial tract harboring a distal or internal Galα1-4Gal sequence. In this study, GSL binding characteristics were obtained in a nonradioactive adhesion assay using biotinylated E. coli UTI and urine isolates combined with enzyme-linked NeutrAvidin for detection. Initial experiments with reference globotriaosylceramide (Gb3Cer, Galα1-4Galβ1-4Glcβ1-1Cer), globotetraosylceramide (Gb4Cer, GalNAcβ1-3Galα1-4Galβ1-4Glcβ1-1Cer) and Forssman GSL (GalNAcα1-3GalNAcβ1-3Galα1-4Galβ1-4Glcβ1-1Cer) revealed balanced adhesion toward the three GSLs for PapG I-mediated attachment. In contrast, E. coli carrying PapG II or PapG III increasingly adhered to growing oligosaccharide chain lengths of Gb3Cer, Gb4Cer and Forssman GSL. Binding studies with GSLs from human A498 kidney and human T24 bladder epithelial cells, both being negative for the Forssman GSL, revealed the less abundant Gb4Cer vs. Gb3Cer as the prevalent receptor in A498 cells of E. coli expressing PapG II or PapG III. On the other hand, T24 cells exhibited a higher relative content of Gb4Cer vs. Gb3Cer alongside dominant binding of PapG II- or PapG III-harboring E. coli toward Gb4Cer and vastly lowered attachment to minor Gb3Cer. Further studies on PapG-mediated interaction with cell surface-exposed GSLs will improve our knowledge on the molecular mechanisms of P-fimbriae-mediated adhesion and may contribute to the development of antiadhesion therapeutics to combat UTIs.

Cell-Penetrating Streptavidin: A General Tool for Bifunctional Delivery with Spatiotemporal Control, Mediated by Transport Systems Such as Adaptive Benzopolysulfane Networks

In this report, cell-penetrating streptavidin (CPS) is introduced to exploit the full power of streptavidin-biotin biotechnology in cellular uptake. For this purpose, transporters, here cyclic oligochalcogenides (COCs), are covalently attached to lysines of wild-type streptavidin. This leaves all four biotin binding sites free for at least bifunctional delivery. To maximize the standards of the quantitative evaluation of cytosolic delivery, the recent chloroalkane penetration assay (CAPA) is coupled with automated high content (HC) imaging, a technique that combines the advantages of fluorescence microscopy and flow cytometry. According to the resulting HC-CAPA, cytosolic delivery of CPS equipped with four benzopolysulfanes was the best among all tested CPSs, also better than the much smaller TAT peptide, the original cell-penetrating peptide from HIV. HaloTag-GFP fusion proteins expressed on mitochondria were successfully targeted using CPS carrying two different biotinylated ligands, HaloTag substrates or anti-GFP nanobodies, interfaced with peptide nucleic acids, flipper force probes, or fluorescent substrates. The delivered substrates could be released from CPS into the cytosol through desthiobiotin-biotin exchange. These results validate CPS as a general tool which enables unrestricted use of streptavidin-biotin biotechnology in cellular uptake.

Improving the reproducibility, accuracy, and stability of an electrochemical biosensor platform for point-of-care use

Electrochemical biosensors possess numerous desirable qualities for target detection, such as portability and ease of use, and are often considered for point-of-care (POC) development. Label-free affinity electrochemical biosensors constructed with semiconductor manufacturing technology (SMT)-produced electrodes and a streptavidin biomediator currently display the highest reproducibility, accuracy, and stability in modern biosensors. However, such biosensors still do not meet POC guidelines regarding these three characteristics. The purpose of this research was to resolve the limitations in reproducibility and accuracy caused by problems with production of the biosensors, with the aim of developing a platform capable of producing devices that exceed POC standards. SMT production settings were optimized and bioreceptor immobilization was improved through the use of a unique linker, producing a biosensor with exceptional reproducibility, impressive accuracy, and high stability. Importantly, the three characteristics of the sensors produced using the proposed platform all meet POC standards set by the Clinical and Laboratory Standards Institute (CLSI). This suggests possible approval of the biosensors for POC development. Furthermore, the detection range of the platform was demonstrated by constructing biosensors capable of detecting common POC targets, including circulating tumor cells (CTCs), DNA/RNA, and curcumin, and the devices were optimized for POC use. Overall, the platform developed in this study shows high potential for production of POC biosensors.

Recent Advances in Electrochemical and Optical Biosensors Designed for Detection of Interleukin 6

Interleukin 6 (IL-6), being a major component of homeostasis, immunomodulation, and hematopoiesis, manifests multiple pathological conditions when upregulated in response to viral, microbial, carcinogenic, or autoimmune stimuli. High fidelity immunosensors offer real-time monitoring of IL-6 and facilitate early prognosis of life-threatening diseases. Different approaches to augment robustness and enhance overall performance of biosensors have been demonstrated over the past few years. Electrochemical- and fluorescence-based detection methods with integrated electronics have been subjects of intensive research due to their ability to offer a better signal-to-noise ratio, high specificity, ultra-sensitivity, and wide dynamic range. In this review, the pleiotropic role of IL-6 and its clinical significance is discussed in detail, followed by detection schemes devised so far for their quantitative analysis. A critical review on underlying signal amplification strategies and performance of electrochemical and optical biosensors is presented. In conclusion, we discuss the reliability and feasibility of the proposed detection technologies for commercial applications.

Getting a handle on chemical probes of chomatin readers

The dynamic nature of histone post-translational modifications such as methylation or acetylation makes possible the alteration of disease associated epigenetic states through the manipulation of the associated epigenetic machinery. One approach is through small molecule perturbation. Chemical probes of epigenetic reader domains have been critical in improving our understanding of the biological consequences of modulating their targets, while also enabling the development of novel probe-based reagents. By appending a functional handle to a reader domain probe, a chemical toolbox of reagents can be created to facilitate chemiprecipitation of epigenetic complexes, evaluate probe selectivity, develop in vitro screening assays, visualize cellular target localization, enable target degradation and recruit epigenetic machinery to a site within the genome in a highly controlled fashion.

Label-free fluorescence detection of protein–ligand interactions based on binding-induced enzymatic cleavage protection

Label-free fluorescence monitoring protein–ligand interaction based on binding induced enzymatic cleavage protection.

An anthracene-pendant ruthenium(ii) complex conjugated to a biotin anchor, an essential handle for photo-induced anti-cancer activity

Efficient avidin binding and selective cancer cell response upon light irradiation of an enhanced ROS photogenerator biotinylated ruthenium complex.

Multifunctional streptavidin–biotin conjugates with precise stoichiometries

Multifunctional streptavidin-biotin conjugates with defined stoichiometry and number of open binding pockets provide molecularly precise alternatives to the statistical mixture of products that typically forms.

Interplay between intrinsically disordered proteins inside membraneless protein liquid droplets

Intrinsically disordered proteins (IDPs) in cells phase separate to form diverse membraneless organelles, which have condensed liquid droplet-like properties and often contain multiple IDPs. However, how potential interactions between different IDPs affect the dynamic behavior of these protein droplets is largely unknown. Here, we develop a rapid IDP clustering system to generate protein droplets with varied residue compositions and examine diverse interacting IDPs inside droplets. Three different IDP droplets actively recruited other diverse IDPs inside droplets with extremely varied enrichment (inside/outside) degrees (over 100-fold variation) under highly crowded conditions. The recruited IDPs were mostly mobile even inside highly immobile droplets. Among the five tested IDPs, the disordered region of Ddx4 helicase with its unique multiple charged residue blocks was noticeably influenced by droplet mobility. We also discovered that droplets of different IDPs could rapidly fuse to each other. Interestingly, some droplets were heterogeneously fused with segregated subcompartments, and this segregation was enhanced by droplet maturation and was more apparent for specific IDP pairs, in which the polar and charged residue compositions are highly different. The present study not only reports multiple peculiar behaviors of interacting IDP pairs inside droplets but also provides valuable information on generating membraneless organelle models with controllable droplet properties.

Membraneless droplets of intrinsically disordered proteins (IDPs) with varied residue compositions uniquely interact with each other as droplets and clients.

Quantifying Activity for Repair of the DNA Lesion 8-Oxoguanine by Oxoguanine Glycosylase 1 (OGG1) in Mouse Adult and Fetal Brain Nuclear Extracts Using Biotin-Labeled DNA

The reactive oxygen species (ROS)-initiated DNA lesion 8-oxoguanine (8-oxoG) is commonly used as a biomarker to measure oxidative stress levels in tissue samples from animals and humans. This lesion also can play a pathogenic role in cancer, birth defects, and neurodegeneration, among other disorders. The level of 8-oxoG may be enhanced due to ROS-initiating environmental factors (e.g., drugs, gamma radiation, microbial infection) or due to a decrease in the activity of oxoguanine glycosylase 1 (OGG1), an enzyme that repairs this lesion. Measurement of the activity of OGG1 can be useful in elucidating mechanisms and complements measurements of 8-oxoG levels in tissues of interest. This protocol describes an assay for measuring the activity of 8-oxoG in mouse adult and fetal brain tissues. Briefly, a synthetic duplex containing the 8-oxoG residue in one of the nucleotides (49-mer), labeled with biotin at the 3'-end, is incubated with protein extract from the tissue of interest containing OGG1, which cleaves the 8-oxoG residue producing a cleavage product of ~27-mer. The percent cleavage quantifies the activity of OGG1 in that tissue. The biotin tag allows rapid and sensitive detection of the cleavage product via chemiluminescence, avoiding the problems of safety and short half-lives of radionuclides encountered in assays employing a radioactively-labeled substrate.

Identification and characterization of a novel heparan sulfate-binding domain in Activin A longest variants and implications for function

Activins regulate numerous processes including inflammation and are synthesized as precursors consisting of a long N-terminal pro-region and a mature protein. Genomic human databases currently list three activin A (Act A) variants termed X1, X2 and X3. The X3 variant is the shortest, lacks N-terminal segments present in X1 and X2, and has been the focus of most past literature. Here, we asked whether these variants are expressed by human cells and tissues and what structural features are contained within their pro-regions. Human monocytic-like cells THP1 and U937 expressed X1 and X2 variants after exposure to phorbol ester or granulocyte-macrophage colony-stimulating factor, while X2 transcripts were present in placenta. Expression vectors encoding full length X2 or X3 variants resulted in production and secretion of biologically active Act A from cultured cells. Previous studies reported a putative HS-binding domain (HBD) in the X3 pro-region. Here, we identified a novel HBD with consensus HS-binding motifs near the N-terminal end of X1 and X2 pro-regions. Peptides encompassing this new domain interacted with substrate-bound HS with nanomolar affinity, while peptides from putative X3 HBD did not. In good agreement, full length X2 pro-region interacted with heparin-agarose, while the X3 pro-region did not. In sum, our study reveals that Act A variants are expressed by inflammatory cells and placenta and yield biological activity. The high affinity HBD in X1 and X2 pro-region and its absence in X3 could greatly influence overall Act A distribution, availability and activity in physiological and pathological circumstances.

Development of SpyTag/SpyCatcher-Bacmid Expression Vector System (SpyBEVS) for Protein Bioconjugations Inside of Silkworms

Protein conjugations at post-translational levels are known to be essential to protein stability and function. Recently, it has been proven that the split protein CnaB2 (SpyTag/SpyCatcher, ST/SC) from Streptococcus pyogenes can induce covalent conjugation rapidly and efficiently under various conditions. The protein of interest fused with the split protein SC/ST could be assembled spontaneously. In light of this finding, we introduced the ST/SC protein coupling concept into the silkworm-bacmid protein expression system (SpyBEVS). As a proof of concept, we first examined and confirmed that a competent ligation occurred between ST/SC-fused protein partners in vitro in cultured silkworm cells and in vivo in silkworm larvae by co-infection of several recombinant baculoviruses. The protein conjugation could be also achieved sufficiently by a simple one-step mixture of purified ST/SC-tagged peptide-protein pairs in vitro. Given the flexibility and robustness of silkworm-BEVS, our results on SpyBEVS show an alternative method for enabling the production of protein decorations in vitro and inside of silkworms.

Design and Synthesis of Anti-Cancer Chimera Molecules Based on Marine Natural Products

In this paper, the chemical conjugation of marine natural products with other bioactive molecules for developing an advanced anti-cancer agent is described. Structural complexity and the extraordinary biological features of marine natural products have led to tremendous research in isolation, structural elucidation, synthesis, and pharmacological evaluation. In addition, this basic scientific achievement has made it possible to hybridize two or more biologically important skeletons into a single compound. The hybridization strategy has been used to identify further opportunities to overcome certain limitations, such as structural complexity, scarcity problems, poor solubility, severe toxicity, and weak potency of marine natural products for advanced development in drug discovery. Further, well-designed marine chimera molecules can function as a platform for target discovery or degradation. In this review, the design, synthesis, and biological evaluation of recent marine chimera molecules are presented.

Enhanced broadband fluorescence detection of nucleic acids using multipolar gap-plasmons on biomimetic Au metasurfaces

Recent studies on metal-insulator-metal-based plasmonic antennas have shown that emitters could couple with higher-order gap-plasmon modes in sub-10-nm gaps to overcome quenching. However, these gaps are often physically inaccessible for functionalization and are not scalably manufacturable. Here, using a simple biomimetic batch-fabrication, a plasmonic metasurface is created consisting of closely-coupled nanodisks and nanoholes in a metal-insulator-metal arrangement. The quadrupolar mode of this system exhibits strong broadband resonance in the visible-near-infrared regime with minimal absorptive losses and effectively supresses quenching, making it highly suitable for broadband plasmon-enhanced fluorescence. Functionalizing the accessible insulator nanogap, analytes are selectively immobilized onto the plasmonic hotspot enabling highly-localized detection. Sensing the streptavidin-biotin complex, a 91-, 288-, 403- and 501-fold fluorescence enhancement is observed for Alexa Fluor 555, 647, 750 and 790, respectively. Finally, the detection of single-stranded DNA (gag, CD4 and CCR5) analogues of genes studied in the pathogenesis of HIV-1 between 10 pM-10 μM concentrations and then CD4 mRNA in the lysate of transiently-transfected cells with a 5.4-fold increase in fluorescence intensity relative to an untransfected control is demonstrated. This outcome promises the use of biomimetic Au metasurfaces as platforms for robust detection of low-abundance nucleic acids.

Fabrication of Electrochemical-Based Bioelectronic Device and Biosensor Composed of Biomaterial-Nanomaterial Hybrid

The field of bioelectronics has paved the way for the development of biochips, biomedical devices, biosensors and biocomputation devices. Various biosensors and biomedical devices have been developed to commercialize laboratory products and transform them into industry products in the clinical, pharmaceutical, environmental fields. Recently, the electrochemical bioelectronic devices that mimicked the functionality of living organisms in nature were applied to the use of bioelectronics device and biosensors. In particular, the electrochemical-based bioelectronic devices and biosensors composed of biomolecule-nanoparticle hybrids have been proposed to generate new functionality as alternatives to silicon-based electronic computation devices, such as information storage, process, computations and detection. In this chapter, we described the recent progress of bioelectronic devices and biosensors based on biomaterial-nanomaterial hybrid.

Direction Matters: Monovalent Streptavidin/Biotin Complex under Load

Novel site-specific attachment strategies combined with improvements of computational resources enable new insights into the mechanics of the monovalent biotin/streptavidin complex under load and forced us to rethink the diversity of rupture forces reported in the literature. We discovered that the mechanical stability of this complex depends strongly on the geometry in which force is applied. By atomic force microscopy-based single molecule force spectroscopy we found unbinding of biotin to occur beyond 400 pN at force loading rates of 10 nN/s when monovalent streptavidin was tethered at its C-terminus. This value is about twice as high than that for N-terminal attachment. Steered molecular dynamics simulations provided a detailed picture of the mechanics of the unbinding process in the corresponding force loading geometries. Using machine learning techniques, we connected findings from hundreds of simulations to the experimental results, identifying different force propagation pathways. Interestingly, we observed that depending on force loading geometry, partial unfolding of N-terminal region of monovalent streptavidin occurs before biotin is released from the binding pocket.

Traceless Templated Amide-Forming Ligations

Template assistance allows organic reactions to occur under highly dilute conditions-where intermolecular reactions often fail to proceed-by bringing reactants into close spatial proximity. This strategy has been elegantly applied to numerous systems, but always with the retention of at least one of the templating groups in the product. In this report, we describe a traceless, templated amide-forming ligation that proceeds at low micromolar concentration under aqueous conditions in the presence of biomolecules. We utilized the unique features of an acylboronate-hydroxylamine ligation, in which covalent bonds are broken in each of the reactants as the new amide bond is formed. By using streptavidin as a template and acylboronates and O-acylhydroxylamines bearing desthiobiotins that are cleaved upon amide formation, we demonstrate that traceless, templated ligation occurs rapidly even at submicromolar concentrations. The requirement for a close spatial orientation of the functional groups-achieved upon binding to streptavidin-is critical for the observed enhancement in the rate and quantity of product formed.

Enhancement of HIFU ablation by sonosensitizer-loading liquid fluorocarbon nanoparticles with pre-targeting in a mouse model

High intensity focused ultrasound (HIFU) is a noninvasive thermal ablation technique for the treatment of benign and malignant solid masses. To improve the efficacy of HIFU ablation, we developed poly (lactide-co-glycolide) (PLGA) nanoparticles encapsulating perfluoropentane (PFP) and hematoporphyrin monomethyl ether (HMME) as synergistic agents (HMME+PFP/PLGA). Two-step biotin-avidin pre-targeting technique was applied for the HIFU ablation. We further modified the nanoparticles with streptavidin (HMME+PFP/PLGA-SA). HMME+PFP/PLGA-SA were highly dispersed with spherical morphology (477.8 ± 81.8 nm in diameter). The encapsulation efficiency of HMME and PFP were 46.6 ± 3.3% and 40.1 ± 2.6%, respectively. The binding efficiency of nanoparticles to streptavidin was 95.5 ± 2.5%. The targeting ability of the HMME+PFP/PLGA-SA nanoparticles was tested by parallel plate flow chamber in vitro. In the pre-targeting group (HMME+PFP/PLGA-SA), a large number of nanoparticles bound to the peripheral and surface of the cell. In the HIFU ablation experiment in vivo, compared with the other groups, the largest gray-scale changes and coagulation necrosis areas were observed in the pre-targeting (HMME+PFP/PLGA-SA) group, with the lowest energy efficiency factor value. Moreover, the microvessel density and proliferation index declined, while the apoptotic index increased, in the tumor tissue surrounding the coagulation necrosis area in the pre-targeting group. Meanwhile, the survival time of the tumor-bearing nude mice in the pre-targeting group was significantly longer than that in the HIFU treatment group. These results suggest that HMME+PFP/PLGA-SA have high potential to act as synergistic agents in HIFU ablation.

Molecular conjugation using non-covalent click chemistry

Molecular conjugation refers to methods used in biomedicine, advanced materials and nanotechnology to link two partners - from small molecules to large and sometimes functionally complex biopolymers. The methods ideally have a broad structural scope, proceed under very mild conditions (including in H₂O), occur at a rapid rate and in quantitative yield with no by-products, enable bioorthogonal reactivity and have zero toxicity. Over the past two decades, the field of click chemistry has emerged to afford us new and efficient methods of molecular conjugation. These methods are based on chemical reactions that produce permanently linked conjugates, and we refer to this field here as covalent click chemistry. Alternatively, if molecular conjugation is undertaken using a pair of complementary molecular recognition partners that associate strongly and selectively to form a thermodynamically stable non-covalent complex, then we refer to this strategy as non-covalent click chemistry. This Perspective is concerned with this latter approach and highlights two distinct applications of non-covalent click chemistry in molecular conjugation: the pre-assembly of molecular conjugates or surface-coated nanoparticles and the in situ capture of tagged biomolecular targets for imaging or analysis.

Cell-Free Expression and Photo-Crosslinking of the Human Neuropeptide Y2 Receptor

G protein-coupled receptors (GPCRs) represent a large family of different proteins, which are involved in physiological processes throughout the entire body. Furthermore, they represent important drug targets. For rational drug design, it is important to get further insights into the binding mode of endogenous ligands as well as of therapeutic agents at the respective target receptors. However, structural investigations usually require homogenous, solubilized and functional receptors, which is still challenging. Cell-free expression methods have emerged in the last years and many different proteins are successfully expressed, including hydrophobic membrane proteins like GPCRs. In this work, an Escherichia coli based cell-free expression system was used to express the neuropeptide Y₂ receptor (Y₂R) for structural investigations. This GPCR was expressed in two different variants, a C-terminal enhanced green fluorescent fusion protein and a cysteine deficient variant. In order to obtain soluble receptors, the expression was performed in the presence of mild detergents, either Brij-35 or Brij-58, which led to high amounts of soluble receptor. Furthermore, the influence of temperature, pH value and additives on protein expression and solubilization was tested. For functional and structural investigations, the receptors were expressed at 37°C, pH 7.4 in the presence of 1 mM oxidized and 5 mM reduced glutathione. The expressed receptors were purified by ligand affinity chromatography and functionality of Y₂R_cysteine_deficient was verified by a homogenous binding assay. Finally, photo-crosslinking studies were performed between cell-free expressed Y₂R_cysteine_deficient and a neuropeptide Y (NPY) analog bearing the photoactive, unnatural amino acid p-benzoyl-phenylalanine at position 27 and biotin at position 22 for purification. After enzymatic digestion, fragments of crosslinked receptor were identified by mass spectrometry. Our findings demonstrate that, in contrast to Y₁R, NPY position 27 remains flexible when bound to Y₂R. These results are in agreement with the suggested binding mode of NPY at Y₂R.

Multivalent Traptavidin-DNA Conjugates for the Programmable Assembly of Nanostructures

Here, we explore the extended utility of two important functional biomolecules, DNA and protein, by hybridizing them through avidin-biotin conjugation. We report a simple yet scalable technique of successive magnetic separations to synthesize traptavidin-DNA conjugates with four distinct DNA binding sites that can be used as a supramolecular building block for programmable assembly of nanostructures. Using this nanoassembly platform, we fabricate several different plasmonic nanostructures with various metallic as well as semiconductor nanoparticles in predetermined ways. We also use the platform to construct dendrimer nanostructures using valency-controlled traptavidin-DNA conjugates in a programmable manner. These results suggest that our protein-DNA supramolecular building blocks would make a significant contribution to the assembly of multicomponent and complex nanostructures for numerous contemporary and future applications from molecular imaging to drug delivery.

Molecular features of steroid-binding antidins and their use for assaying serum progesterone

Chicken avidin (Avd) and streptavidin from Streptomyces avidinii are extensively used in bionanotechnology due to their extremely tight binding to biotin (K_d ~ 10⁻¹⁵ M for chicken Avd). We previously reported engineered Avds known as antidins, which have micro- to nanomolar affinities for steroids, non-natural ligands of Avd. Here, we report the 2.8 Å X-ray structure of the sbAvd-2 (I117Y) antidin co-crystallized with progesterone. We describe the creation of new synthetic phage display libraries and report the experimental as well as computational binding analysis of progesterone-binding antidins. We introduce a next-generation antidin with 5 nM binding affinity for progesterone, and demonstrate the use of antidins for measuring progesterone in serum samples. Our data give insights on how to engineer and alter the binding preferences of Avds and to develop better molecular tools for modern bionanotechnological applications.

Streptavidin interfacing as a general strategy to localize fluorescent membrane tension probes in cells

To image the mechanical properties of biological membranes, twisted push-pull mechanophores that respond to membrane tension by planarization in the ground state have been introduced recently. For their application in biological systems, these so-called fluorescent flippers will have to be localized to specific environments of cellular membranes. In this report, we explore streptavidin as a versatile connector between biotinylated flipper probes and biotinylated targets. Fluorescence spectroscopy and microscopy with LUVs and GUVs reveal the specific conditions needed for desthiobiotin-loaded streptavidin to deliver biotinylated flippers selectively to biotinylated membranes. Selectivity for biotinylated plasma membranes is also observed in HeLa cells, confirming the compatibility of this strategy with biological systems. Streptavidin interfacing does not affect the mechanosensitivity of the flipper probes, red shift in the excitation maximum and fluorescence lifetime increase with membrane order and tension, as demonstrated, inter alia, using FLIM.

Bioconjugation in Drug Delivery: Practical Perspectives and Future Perceptions

For the past three decades, pharmaceutical research has been mainly converging to novel carrier systems and nanoparticulate colloidal technologies for drug delivery, such as nanoparticles, nanospheres, vesicular systems, liposomes, or nanocapsules to impart novel functions and targeting abilities. Such technologies opened the gate towards more sophisticated and effective multi-acting platform(s) which can offer site-targeting, imaging, and treatment using a single multifunctional system. Unfortunately, such technologies faced major intrinsic hurdles including high cost, low stability profile, short shelf-life, and poor reproducibility across and within production batches leading to harsh bench-to-bedside transformation.Currently, pharmaceutical industry along with academic research is investing heavily in bioconjugate structures as an appealing and advantageous alternative to nanoparticulate delivery systems with all its flexible benefits when it comes to custom design and tailor grafting along with avoiding most of its shortcomings. Bioconjugation is a ubiquitous technique that finds a multitude of applications in different branches of life sciences, including drug and gene delivery applications, biological assays, imaging, and biosensing.Bioconjugation is simple, easy, and generally a one-step drug (active pharmaceutical ingredient) conjugation, using various smart biocompatible, bioreducible, or biodegradable linkers, to targeting agents, PEG layer, or another drug. In this chapter, the different types of bioconjugates, the techniques used throughout the course of their synthesis and characterization, as well as the well-established synthetic approaches used for their formulation are presented. In addition, some exemplary representatives are outlined with greater emphasis on the practical tips and tricks of the most prominent techniques such as click chemistry, carbodiimide coupling, and avidin-biotin system.

Precise supramolecular control of surface coverage densities on polymer micro- and nanoparticles

We report herein the controlled surface functionalization of micro- and nanoparticles by supramolecular host-guest interactions. Our idea is to exploit the competition of two high-affinity guests for binding to the surface-bound supramolecular host cucurbit[7]uril (CB7). To establish our strategy, surface azide groups were introduced to hard-sphere (poly)methylmethacrylate particles with a grafted layer of poly(acrylic acid), and a propargyl derivative of CB7 was coupled to the surface by click chemistry. The amount of surface-bound CB7 was quantified with the high-affinity guest aminomethyladamantane (AMADA), which revealed CB7 surface coverage densities around 0.3 nmol cm-2 indicative of a 3D layer of CB7 binding sites on the surface. The potential for surface functionalization was demonstrated with an aminoadamantane-labeled rhodamine (Ada-Rho) as a second high-affinity guest. Simultaneous incubation of CB7-functionalized particles with both high-affinity guests, AMADA and Ada-Rho, revealed a simple linear relationship between the resulting surface coverage densities of the model fluorescent dye and the mole fraction of Ada-Rho in the incubation mixture. This suggests a highly modular supramolecular strategy for the stable immobilization of application-relevant molecules on particle surfaces and a precise control of their surface coverage densities.

Light-driven electron injection from a biotinylated triarylamine donor to [Ru(diimine)3](2+)-labeled streptavidin

Electron transfer from a biotinylated electron donor to photochemically generated Ru(iii) complexes covalently anchored to streptavidin is demonstrated by means of time-resolved laser spectroscopy. Through site-selective mutagenesis, a single cysteine residue was engineered at four different positions on streptavidin, and a Ru(ii) tris-diimine complex was then bioconjugated to the exposed cysteines. A biotinylated triarylamine electron donor was added to the Ru(ii)-modified streptavidins to afford dyads localized within a streptavidin host. The resulting systems were subjected to electron transfer studies. In some of the explored mutants, the phototriggered electron transfer between triarylamine and Ru(iii) is complete within 10 ns, thus highlighting the potential of such artificial metalloenzymes to perform photoredox catalysis.

Streptavidin-conjugated gold nanoclusters as ultrasensitive fluorescent sensors for early diagnosis of HIV infection

We have engineered streptavidin-labeled fluorescent gold nanoclusters to develop a gold nanocluster immunoassay (GNCIA) for the early and sensitive detection of HIV infection. We performed computational simulations on the mechanism of interaction between the nanoclusters and the streptavidin protein via in silico studies and showed that gold nanoclusters enhance the binding to the protein, by enhancing interaction between the Au atoms and the specific active site residues, compared to other metal nanoclusters. We also evaluated the role of glutathione conjugation in binding to gold nanoclusters with streptavidin. As proof of concept, GNCIA achieved a sensitivity limit of detection of HIV-1 p24 antigen in clinical specimens of 5 pg/ml, with a detection range up to1000 pg/ml in a linear dose-dependent manner. GNCIA demonstrated a threefold higher sensitivity and specificity compared to enzyme-linked immunosorbent assay for the detection of HIV p24 antigen. The specificity of the immunoassay was 100% when tested with plasma samples negative for HIV-1 p24 antigen and positive for viruses such as hepatitis B virus, hepatitis C virus, and dengue. GNCIA could be developed into a universal labeling technology using the relevant capture and detector antibodies for the specific detection of antigens of various pathogens in the future.

Production of a mono-biotinylated EGFR nanobody in the E. coli periplasm using the pET22b vector

OBJECTIVE

Our aim was to produce a mono-biotinylated single domain antibody ('nanobody') specific for the epidermal growth factor receptor (EGFR), which is overexpressed in many cancer cells. The binding of the nanobody and its function are tested in cancer cells. The construct could be used to carry variable therapeutic or diagnostic load using biotin-streptavidin bridging.

RESULTS

The EGFR-specific 7D12 nanobody was genetically fused to an IgA hinge linker and to a C-terminal biotin ligase acceptor sequence, allowing mono-biotinylation in E. coli. Expression was in strain BL21-DE3 from a T7 RNA polymerase driven pET22b vector. The biotinylated nanobody, isolated from the periplasm, was purified using streptavidin-mutein affinity chromatography. Final yields were up to 5 mg/l of cell culture. We showed that the construct could bind to EGFR expressing A431 epidermoid carcinoma cells, and to transiently transformed EGFR overexpressing HEK293T cells and not to EGFR negative control cells. The specificity for the EGFR was further demonstrated by immunoprecipitation. To test the functionality, PC9 non-small cell lung cancer cells were treated with mono-biotinylated nanobody or with streptavidin-coupled tetravalent nanobodies. Both were able to block mutant EGFR phosphorylation and slow down growth of PC9 cells. Tetravalent nanobodies were able to downregulate AKT phosphorylation.

Evaluation of protein-ligand interactions using the luminescent interaction assay FlimPIA with streptavidin-biotin linkage

Post-translational modifications, such as phosphorylation, are crucial in the regulation of protein-protein interactions and protein function in cell signaling. Here, we studied the interaction between the transactivation domain peptide of cancer suppressor protein p53 and its negative regulator Mdm2 using a novel protein-protein interaction assay, based on the modified FlimPIA using the streptavidin-biotin interaction to link the p53 peptide and the probe enzyme. We succeeded in detecting an attenuation in the affinity of p53 towards Mdm2 caused by the phosphorylation at Thr18. It showed that the targets, which are not easy to fuse with the FlimPIA probes, such as phosphorylated peptides can be used in this system. Also, the use of streptavidin nanobeads was found effective to get clearer signal, probably due to concentration of the detection system onto the bead surface. The system was further applied to the detection of FKBP-FRB interaction using biotinylated FKBP domain, which suggested another potential merit of this system that allows to avoid misfolding and steric hindrance often observed for the fusion protein approach.

Functional expression of monomeric streptavidin and fusion proteins in Escherichia coli: applications in flow cytometry and ELISA

Monomeric streptavidin (mSA) offers a combination of structural and binding properties that are useful in many applications, including a small size and monovalent biotin binding. Because mSA contains a structurally important disulfide bond, the molecule does not fold correctly when expressed inside the cell. We show that mSA can be expressed in a functional form in Escherichia coli by fusing the OmpA signal sequence at the amino terminus. Expressed mSA is exported to the periplasm, from which the molecule leaks to the medium under vigorous shaking. Purified mSA can be conjugated with FITC and used to label microbeads and yeast cells for analysis by flow cytometry, further expanding the scope of mSA-based applications. Some applications require recombinant fusion of mSA with another protein. mSA fused to EGFP cannot be secreted to the medium but was successfully expressed in an engineered cell line that supports oxidative folding in the cytoplasm. Purified mSA-EGFP and mSA-mCherry bound biotin with high affinity and were successfully used in conventional flow cytometry and imaging flow cytometry. Finally, we demonstrate the use of mSA in ELISA, in which horseradish peroxidase-conjugated mSA and biotinylated secondary antibody are used together to detect primary antibody captured on an ELISA plate. Engineering mSA to introduce additional lysine residues can increase the reporter signal above that of wild-type streptavidin. Together, these examples establish mSA as a convenient reagent with a potentially unique role in biotechnology.

Reactivity and Selectivity of Iminium Organocatalysis Improved by a Protein Host

There has been growing interest in performing organocatalysis within a supramolecular system as a means of controlling reaction reactivity and stereoselectivity. Here, a protein is used as a host for iminium catalysis. A pyrrolidine moiety is covalently linked to biotin and introduced to the protein host streptavidin for organocatalytic activity. Whereas in traditional systems stereoselectivity is largely controlled by the substituents added to the organocatalyst, enantiomeric enrichment by the reported supramolecular system is completely controlled by the host. Also, the yield of the model reaction increases over 10-fold when streptavidin is included. A 1.1 Å crystal structure of the protein-catalyst complex and molecular simulations of a key intermediate reveal the chiral scaffold surrounding the organocatalytic reaction site. This work illustrates that proteins can be an excellent supramolecular host for driving stereoselective secondary amine organocatalysis.

Bacterial Biohybrid Microswimmers

Over millions of years, Nature has optimized the motion of biological systems at the micro and nanoscales. Motor proteins to motile single cells have managed to overcome Brownian motion and solve several challenges that arise at low Reynolds numbers. In this review, we will briefly describe naturally motile systems and their strategies to move, starting with a general introduction that surveys a broad range of developments, followed by an overview about the physical laws and parameters that govern and limit motion at the microscale. We characterize some of the classes of biological microswimmers that have arisen in the course of evolution, as well as the hybrid structures that have been constructed based on these, ranging from Montemagno's ATPase motor to the SpermBot. Thereafter, we maintain our focus on bacteria and their biohybrids. We introduce the inherent properties of bacteria as a natural microswimmer and explain the different principles bacteria use for their motion. We then elucidate different strategies that have been employed for the coupling of a variety of artificial microobjects to the bacterial surface, and evaluate the different effects the coupled objects have on the motion of the "biohybrid." Concluding, we give a short overview and a realistic evaluation of proposed applications in the field.