Starch, cellulose, pectin, gum, alginate, chitin and chitosan derived (nano)materials for sustainable water treatment: A review

Preparation and characterization of starch-cellulose interpenetrating network hydrogels based on sequential Diels-Alder click reaction and photopolymerization

Herein, starch-cellulose interpenetrating network (IPN) hydrogels were fabricated by sequential Diels-Alder click reaction and photopolymerization in water. Moreover, β-cyclodextrin, a commonly used host molecule in supramolecular chemistry, was also introduced to improve the performance of the IPN hydrogel. Firstly, the starch-based dienes were synthesized by modifying starch with N-maleoyl-β-alanine, and the cellulose-based dienophiles were obtained by the reaction of cellulose and furfurylamide succinate; Secondly, the as-synthesized starch-based dienes, cellulose-based dienophiles, polymerizable β-cyclodextrin, crosslinker, and acrylamide were dissolved in water and obtained a transparent solution. The solution was maintained in a water bath of 50 °C for 3 h, forming the first network via catalyst-free click Diels-Alder reaction, subsequently, the second network was formed by photopolymerization. Their preparation conditions were optimized via one-factor experiments and their properties and structures were characterized. Finally, 5- fluorouracil (5-Fu) was used as a model drug to study the sustained release behavior of the drug-loaded hydrogels. Release profile was found to fit in Ritger-Peppas kinetic model and polymer relaxation and drug diffusion made a valuable contribution to drug release. Taking into account the virtues of easily controllable photopolymerization and catalyst-free Diels-Alder reaction, the strategy described here has a potential application in the preparation of IPN hydrogels.

MXenes in photomedicine: Advances and prospects

MXenes and their related nanocomposites with superior physicochemical properties such as high surface area, ease of synthesis and functionalization, high drug loading capacity, collective therapy potentials, pH-triggered drug release behavior,...

Recent progress, synthesis, and applications of chitosan-decorated magnetic nanocomposites in remediation of dye-laden wastewaters

Over the past several decades, the disposal of dyes from the industrial manufacturing sector has had an inadvertent impact on water ecology as polluted water bodies with these hazardous dyes...

Applications of infrared spectroscopy in polysaccharide structural analysis: Progress, challenge and perspective

•

Functional properties of polysaccharides depend on their structural features.

•

IR spectroscopy is widely used in polysaccharide structural analysis.

•

Classical applications of IR spectroscopy in polysaccharide are reviewed.

•

IR integrating techniques can considerably expand its application scope.

Polysaccharides are important biomacromolecules with numerous beneficial functions and a wide range of industrial applications. Functions and properties of polysaccharides are closely related to their structural features. Infrared (IR) spectroscopy is a well-established technique which has been widely applied in polysaccharide structural analysis. In this paper, the principle of IR and interpretation of polysaccharide IR spectrum are briefly introduced. Classical applications of IR spectroscopy in polysaccharide structural elucidation are reviewed from qualitative and quantitative aspects. Some advanced IR techniques including integrating with mass spectrometry (MS), microscopy and computational chemistry are introduced and their applications are emphasized. These emerging techniques can considerably expand application scope of IR, thus exert a more important effect on carbohydrate characterization. Overall, this review seeks to provide a comprehensive insight to applications of IR spectroscopy in polysaccharide structural analysis and highlights the importance of advanced IR-integrating techniques.

Making nanostructured materials from maize, milk and malacostraca

Nano-structured materials are used in electronics, diagnostics, therapeutics, smart packaging, energy management and textiles, areas critical for society and quality of life. However, their fabrication often places high demands on limited natural resources. Accordingly, renewable sources for the feedstocks used in their production are highly desirable. We demonstrate the use of readily available biopolymers derived from maize (zein), milk (casein) and malacostraca (crab-shell derived chitin) in conjunction with sacrificial templates, self-assembled monodisperse latex beads and anodized aluminium membranes, for producing robust surfaces coated with highly regular hyperporous networks or wire-like morphological features, respectively. The utility of this facile strategy for nano-structuring of biopolymers was demonstrated in a surface based-sensing application, where biotin-selective binding sites were generated in the zein-based nano-structured hyperporous network.

Bio and photoactive starch/MnO2 and starch/MnO2/cotton hydrogel nanocomposite

Here a starch and starch hydrogel nanocomposite and superabsorbent cotton fabric was fabricated and characterized. The optimized starch hydrogel nanocomposite was synthesized by using 0.008 M potassium permanganate, 0.7 g starch and 0.6 M sodium hydroxide at 50-55 °C. potassium permanganate as a strong and inexpensive oxidizing agent were used to potentially nano cross-link the starch molecular chains and graft the starch to cellulose molecular chains along with synthesizing manganese dioxide nanoparticles (MnO₂) to further obtain antibacterial, antifungal and photocatalytic properties. The stability of products in water and the water absorption indicated the highest water content of 800% for the optimum sample. The same materials and conditions were also applied to the cotton fabric to produce a superabsorbent fabric. The simple one-step synthesis procedure, in-situ production of nanoparticles, cost-effectiveness and having desired features including photocatalytic, antibacterial properties of 93% against S. aureus, and biocompatibility make the starch hydrogel nanocomposite a suitable candidate for various applications such as agriculture, medical, textile engineering and water treatment.

Natural carbohydrate-based thermosensitive chitosan/pectin adsorbent for removal of Pb(II) from aqueous solutions

Biodegradable and eco-friendly adsorbents composed of natural carbohydrates have been used to replace carbon-based materials. This study presents a natural carbohydrate-based chitosan/pectin (CS/Pec) hydrogel adsorbent to remove Pb(II) from aqueous solutions. The physical CS/Pec hydrogel was prepared by blending aqueous CS and Pec solutions at 65 °C, preventing the use of toxic chemistries (crosslinking agents). The thermosensitive CS/Pec hydrogel was quickly created by cooling CS/Pec blend at room temperature. The used strategy created stable CS/Pec hydrogel against disintegration and water dissolution. The as-prepared hydrogel was characterized by infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). The adsorbent had 1.688 mmol -COO^- for each gram. These ionized sites bind Pb(II) ions, promoting their adsorption. The adsorption kinetic and equilibrium studies indicated that the Elovich and pseudo-second-order models adjusted well to the experimental data, respectively. The maximum removal capacities (q_m) predicted by the Langmuir and Sips isotherms achieved 108.2 and 97.55 mg/g at 0.83 g/L adsorbent dosage (pH 4.0). The hydrogel/Pb(II) pair was characterized by scanning electron microscopy (SEM), X-ray dispersive energy (EDS), and differential scanning calorimetry (DSC). The chemisorption seems to play an essential role in the Pb(II) adsorption. Therefore, the adsorbent was not recovered, showing low potential for reusability.

Recent Progress and Prospects in Catalytic Water Treatment

Presently, conventional technologies in water treatment are not efficient enough to completely mineralize refractory water contaminants. In this context, the implementation of catalytic processes could be an alternative. Despite the advantages provided in terms of kinetics of transformation, selectivity, and energy saving, numerous attempts have not yet led to implementation at an industrial scale. This review examines investigations at different scales for which controversies and limitations must be solved to bridge the gap between fundamentals and practical developments. Particular attention has been paid to the development of solar-driven catalytic technologies and some other emerging processes, such as microwave assisted catalysis, plasma-catalytic processes, or biocatalytic remediation, taking into account their specific advantages and the drawbacks. Challenges for which a better understanding related to the complexity of the systems and the coexistence of various solid-liquid-gas interfaces have been identified.

Cellulose-Based Materials for Water Remediation: Adsorption, Catalysis, and Antifouling

Cellulose-based materials have been advanced technologies that used in water remediation. They exhibit several advantages being the most abundant biopolymer in nature, high biocompatibility, and contain several functional groups. Cellulose can be prepared in several derivatives including nanomaterials such as cellulose nanocrystals (CNCs), cellulose nanofibrils (CNFs), and TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-mediated oxidized cellulose nanofibrils (TOCNF). The presence of functional groups such as carboxylic and hydroxyls groups can be modified or grafted with organic moieties offering extra functional groups customizing for specific applications. These functional groups ensure the capability of cellulose biopolymers to be modified with nanoparticles such as metal-organic frameworks (MOFs), graphene oxide (GO), silver (Ag) nanoparticles, and zinc oxide (ZnO) nanoparticles. Thus, they can be applied for water remediation via removing water pollutants including heavy metal ions, organic dyes, drugs, and microbial species. Cellulose-based materials can be also used for removing microorganisms being active as membranes or antibacterial agents. They can proceed into various forms such as membranes, sheets, papers, foams, aerogels, and filters. This review summarized the applications of cellulose-based materials for water remediation via methods such as adsorption, catalysis, and antifouling. The high performance of cellulose-based materials as well as their simple processing methods ensure the high potential for water remediation.

Flower-inspired bionic sodium alginate hydrogel evaporator enhancing solar desalination performance

Improving the desalination performance of the solar evaporator is the core of promoting the application of sustainable solar desalination technology. In this study, a flower-inspired bionic evaporator was successfully prepared, the bundled of black hollow sodium alginate hydrogel tubes were fixed vertically to form a flower structure with branched hydrogel tubes at the top. The prepared black flower hydrogel evaporator showed the excellent evaporation rate of 3.2 kg m^-2 h^-1, and the salt crystallization phenomenon during solar desalination was effectively suppressed. Three-dimensional flower configuration of the hydrogel tube with the appropriate length could increase the effective evaporation area and accelerate the evaporation process. Moreover, the hollow hydrogel network structure exhibited the stable water supply capacity to promote salt ions exchange at the evaporation interface, thereby inhibiting salt crystallization phenomenon. This study proved that constructing a 3D-shaped evaporator is an effective way to subversively improve the solar desalination performance for application.

Applications of chitin and chitosan based biomaterials for the adsorptive removal of textile dyes from water - A comprehensive review

The presence of pollutants in the water bodies deteriorate the water quality and make it unfit for use. From an environmental perspective, it is essential to develop new technologies for the wastewater treatment and recycling of dye contaminated water. The surface modified chitin and chitosan biopolymeric composites based adsorbents, have an important role in the toxic organic dyes from removal wastewater. The surface modification of biopolymers with various organics and inorganics produces more active sites at the surface of the adsorbent, which enhances dye and adsorbent interaction more reliable. Herein, the work brought in the thought of the application of various chitin and chitosan composites in wastewater remediation and suggested the versatility in composites for the development of rapid, selective and effective removal processes for the detoxification of a variety of organic dyes. It further emphasizes the existing obstruction and impending prediction for the deprivation of dyes via adsorption techniques.

Direct regeneration of hydrogels based on lemon peel and its isolated microcrystalline cellulose: Characterization and application for methylene blue adsorption

In this study, we developed a facile and eco-friendly fabrication of hydrogels based on lemon peel (LP) and its isolated microcrystalline cellulose (LPMCC) by direct co-dissolving in 1-butyl-3-methylimidazolium chloride (BmimCl), followed by direct regeneration in distilled water to form hydrogels. The influence of LP addition on the structure and methylene blue (MB) adsorption of the hydrogels was systematically investigated. The hydrogels displayed a physically cross-linked network through hydrogen bonding interactions. Compared with pure LPMCC hydrogel, the introduction of LP increased the porosity and improved the thermal stability of the hydrogels. The adsorption process of MB on the hydrogels conformed better to the pseudo-second-order kinetic (R² > 0.993) and Langmuir isotherm models (R² > 0.996). The MB adsorption process was feasible, spontaneous and exothermic in nature, and was influenced by initial MB concentration, pH, temperature, ionic type and strength. Notably, the introduction of LP improved MB adsorption capacity of the hydrogels. This work develops a facile approach of agricultural by-products based hydrogels using pure cellulose as the structural skeleton and untreated lignocellulose components as the structure modifier.

Remediation and mineralization processes for per- and polyfluoroalkyl substances (PFAS) in water: A review

Per- and polyfluoroalkyl substances (PFAS) are synthetic organic molecules used to manufacture various consumer and industrials products. In PFAS, the CF bond is stable, which renders these compounds chemically stable and prevents their breakdown. Several PFAS treatment processes such as adsorption, photolysis and photocatalysis, bioremediation, sonolysis, electrochemical oxidation, etc., have been explored and are being developed. The present review article has critically summarized degradative technologies and provides in-depth knowledge of photodegradation, electrochemical degradation, chemical oxidation, and reduction mineralization mechanism. Also, novel non-degradative technologies, including nano-adsorbents, natural and surface-modified clay minerals/zeolites, calixarene-based polymers, and molecularly imprinted polymers and adsorbents derived from biomaterials are discussed in detail. Of these novel approaches photocatalysis combined with membrane filtration or electrochemical oxidation via a treatment train approach shows promising results in removing PFAS in natural waters. The photocatalytic mineralization mechanism of PFOA is discussed, leading to recommendations for future research on novel remediation strategies for removing PFAS from water.

Photocatalytic degradation of Eosin B dye in aqueous solution by cadmium oxide nanoparticles

Cadmium oxide (CdO) and potassium (K) doped CdO nanoparticles (NPs) were synthesized by the chemical co-precipitation method and were used as photocatalysts for the degradation of Eosin B dye. The X-ray diffraction results presented that the crystallite size of undoped CdO and K doped CdO NPs were 43.74 and 42.31 nm, respectively. The morphological study and percent composition of synthesized undoped CdO and K doped CdO NPs was done by scanning electron microscope and energy dispersive X-ray analysis. The formation of NPs was confirmed by Fourier transform infrared spectroscopy. The precursor decomposition to CdO after annealing at ∼500 °C was studied by thermogravimetric analysis. The undoped CdO and K doped CdO nanoparticles degraded about 80% and 90% of the dye, respectively, in 140 min. The maximum degradation efficiency of the dye was achieved at a pH of 4, dye initial concentration of 15 ppm, catalyst dose of 20 mg, and a temperature of 45 °C. The degradation efficiency observed for recovered undoped CdO and recovered doped CdO nanoparticles was found to be 63% and 77%, respectively.

Synthesis, Characterization and Application of Polypyrrole Functionalized Nanocellulose for the Removal of Cr(VI) from Aqueous Solution

Heavy metals are toxic substances that pose a real danger to humans and organisms, even at low concentration. Therefore, there is an urgent need to remove heavy metals. Herein, the nanocellulose (NC) was synthesized by the hydrolysis of cellulose using sulfuric acid, and then functionalized using polypyrrole (ppy) through a polymerization reaction to produce polypyrrole/nanocellulose (ppy/NC) nanocomposite. The synthesized nanocomposite was characterized using familiar techniques including XRD, FT-IR, SEM, TEM, and TGA. The obtained results showed a well-constructed nanocomposite with excellent thermal stability in the nano-sized scale. The adsorption experiments showed that the ppy/NC nanocomposite was able to adsorb hexavalent chromium (Cr(VI)). The optimum pH for the removal of the heavy metal was pH 2. The interfering ions showed minor effect on the adsorption of Cr(VI) resulted from the competition between ions for the adsorption sites. The adsorption kinetics were studied using pseudo 1st order and pseudo 2nd order models indicating that the pseudo second order model showed the best fit to the experimental data, signifying that the adsorption process is controlled by the chemisorption mechanism. Additionally, the nanocomposite showed a maximum adsorption capacity of 560 mg/g according to Langmuir isotherm. The study of the removal mechanism showed that Cr(VI) ions were removed via the reduction of high toxic Cr(VI) to lower toxic Cr(III) and the electrostatic attraction between protonated ppy and Cr(VI). Interestingly, the ppy/NC nanocomposite was reused for Cr(VI) uptake up to six cycles showing excellent regeneration results. Subsequently, Cr(VI) ions can be effectively removed from aqueous solution using the synthesized nanocomposite as reusable and cost-effective adsorbent.

One-Step Preparation of Chitin Nanofiber Dispersion in Full pH Surroundings Using Recyclable Solid Oxalic Acid and Evaluation of Redispersed Performance

This study proposed an efficient and economical preparation pathway from purified chitin to nanofibers that can be dispersed in full pH surroundings. Recyclable oxalic acid was applied to prepare chitin nanofibers in a mild environment along with concurrent modifications of the carboxylic groups on the surface. Pretreatment with oxalic acid significantly improved the mechanical disintegration of chitin into nanofibers, the length of nanofibers reached ∼1100 nm, and the crystallinity and thermal stability of the chitin were basically unchanged with mild treatment. Oxalic acid can be reused many times with a high recovery of over 91%. Most importantly, the obtained nanofibers can be fabricated into films and hydrogels with certain mechanical properties, which can be redispersed into nanofibers using mild mechanical treatment. This method not only produces nanofibers in a green, reusable system but also provides a reference for the potential application of chitin nanofibers in commercial transportation and wide applicability.

Synthesis, characterization, and flocculation performance of cationic starch nanoparticles

A series of cationic starches with different degrees of substitution were synthesized by etherification of potato starch with 3-chloro-2-hydroxypropyl trimethylammonium chloride (CTA). Cationic starch nanoparticles (CTA-StNPs) with different sizes were prepared by precipitation. Flocculation behaviors of the CTA-StNPs in simulated water sample containing kaolin were studied. The results showed that the dosage required to bring the simulated water sample containing kaolin to attain maximum transmittance at pH = 4 was significantly less than that at pH = 7. Both the size and degree of substitution of the CTA-StNPs affected their flocculation performance. The smaller the size and the higher the degree of substitution of CTA-StNPs, the better was the flocculation performance. Charge neutralization played a leading role in the flocculation process. The adsorption process of the CTA-StNPs onto kaolin could be divided into rapid adsorption, stable adsorption and equilibrium adsorption and followed pseudo second-order kinetic equation very well (R² > 0.99).

Mesoporous cellulose-chitosan composite hydrogel fabricated via the co-dissolution-regeneration process as biosorbent of heavy metals

Developing low-cost and high-performance biosorbent for water purification continues drawing more and more attention. In this study, cellulose-chitosan composite hydrogels were fabricated via a co-dissolution and regeneration process using a molten salt hydrate (a 60 wt% aqueous solution of LiBr) as a solvent. The addition of chitosan not only introduced functionality for metal adsorption but also increased the specific surface area and improved the mechanical strength of the composite hydrogel, compared to pure cellulose hydrogel. Batch adsorption experiments indicated that the composite hydrogel with 37% cellulose and 63% chitosan exhibited an adsorption capacity of 94.3 mg/g (1.49 mmol/g) toward Cu²⁺ at 23 °C, pH 5, and initial metal concentration of 1500 mg/L, which was 10 times greater than the adsorption capacity of pure cellulose hydrogel. Competitive adsorption from a mixed metals solution revealed that the cellulose-chitosan composite hydrogel exhibited selective adsorption of the metals in the order of Cu²⁺ > Zn²⁺ > Co²⁺. This study successfully demonstrated an innovative method to fabricate biosorbents from abundant and renewable natural polymers (cellulose and chitosan) for removing metal ions from water.

Recent Advances in Chitin and Chitosan/Graphene-Based Bio-Nanocomposites for Energetic Applications

Herein, we report recent developments in order to explore chitin and chitosan derivatives for energy-related applications. This review summarizes an introduction to common polysaccharides such as cellulose, chitin or chitosan, and their connection with carbon nanomaterials (CNMs), such as bio-nanocomposites. Furthermore, we present their structural analysis followed by the fabrication of graphene-based nanocomposites. In addition, we demonstrate the role of these chitin- and chitosan-derived nanocomposites for energetic applications, including biosensors, batteries, fuel cells, supercapacitors and solar cell systems. Finally, current limitations and future application perspectives are entailed as well. This study establishes the impact of chitin- and chitosan-generated nanomaterials for potential, unexplored industrial applications.

Recovery of Heavy Metal Ions Using Magnetic Glycine-Modified Chitosan—Application to Aqueous Solutions and Tailing Leachate

The necessity of decontaminating effluents for the dual purpose of environmental beneficiation and valorization of low-grade resources is driving the development of new sorbents. The functionalization of biopolymers is a promising strategy for improving sorption performance. Incorporating magnetic micro-particles offers an opportunity for the facilitated recovery of spent micron-size sorbent. Combining magnetic facilities and biopolymer functionalization represents a winning strategy. Magnetic glycine-grafted chitosan (G@MChs) was synthesized for the sorption of Ni(II), Zn(II), and Hg(II) before being applied to the removal of hazardous and strategic metals from tailing leachates. The sorbent was characterized using Fourier transform infrared spectroscopy and scanning electron microscopy, before and after metal sorption. The acid–base properties of functionalized sorbent were also determined (pHPZC). Uptake kinetics were studied in mono- and multi-component solutions using different equations for kinetic modeling at optimized pH (i.e., pH0: 5.5). Langmuir and Sips equations were applied to model sorption isotherms in single-component solutions. In addition, sorption isotherms in multi-component solutions were used to evaluate the preference for selected metals. Maximum sorption capacities were 0.35 mmol Hg g−1, 0.47 mmol Zn g−1, and 0.50 mmol Ni g−1. Acidified urea solution (pH 2.7) successfully desorbs metal ions from G@MChs (desorption > 90%). The sorbent was tested for the recovery of hazardous and strategic metal ions from acidic leachates of tailings. This study demonstrates the promising performance of G@MChs for the treatment of complex metal-bearing solutions.

Synthesis of Sodium Alginate-Silver Nanocomposites Using Plasma Activated Water and Cold Atmospheric Plasma Treatment

In this study, sodium alginate (SA)-based, eco-friendly nanocomposites films were synthesized for potential food packaging applications using silver nitrate (AgNO₃) as the metal precursor, reactive nitrogen and oxygen species (RNOS) created within plasma activated water (PAW), or through cold plasma treatment (CP) as reducing agent and SA as stabilizing agent. The formation of silver nanoparticles (AgNPs) was confirmed via the absorption peaks observed between 440 and 450 nm in UV-vis spectroscopy. The tensile strength (TS) and tensile modulus (TM) of the nanocomposite films were significantly higher than those of the SA films. An increase in the TS was also observed as the AgNP concentration was increased from 1 to 5 mM. The storage modulus (G’) of the nanocomposite solution was higher than that of the SA solution. The synthesis of AgNPs resulted both in a higher solution viscosity and a more marked shear-thinning effect. The synthesized AgNPs showed antimicrobial activity against both Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria. The AgNPs were spherical in shape with an average size of 22 nm.

Cerium based UiO-66 MOF as a multipollutant adsorbent for universal water purification

Herein, we demonstrate the use of cerium (Ce)-UiO-66 metal organic framework (MOF) for the removal of a variety of potentially toxic pollutants. The Ce-UiO-66 MOF, with similar framework topologies to Zr-UiO-66, has not been explored for its adsorptive properties in water remediation. The replacement of Zr metal center with Ce yields a MOF that can be synthesized in shorter durations with lesser energy consumptions and with excellent multipollutant adsorption properties. Further, the Ce-UiO-66 MOF was also studied for its adsorption abilities in the binary component system. Interestingly, the adsorbent showed higher adsorption capacities in the presence of other pollutants. Removal studies for other potentially toxic anionic and cationic dyes showed that the Ce-UiO-66 MOF has a wide range of contaminant removal abilities. Investigations of individual adsorption capacities revealed that the Ce-UiO-66 MOF has a maximum adsorption capacity of 793.7 mg/g for congo red (CR), 110 mg/g for methylene blue (MB), 66.1 mg/g for fluoride (F^-), 30 mg/g for Cr⁶⁺ and 485.4 mg/g for the pharmaceutical waste diclofenac sodium (DCF). To imply the practical applications of the Ce-UiO-66 MOF we have also demonstrated an adaptable filter that could separate all the potentially toxic pollutants.

Polysaccharide-based (nano)materials for Cr(VI) removal

Chromium is a potentially poisonous and carcinogenic species, which originates from human activities and various industries such as leather, steel, iron, and electroplating industries. Chromium is present in various oxidation states, among which hexavalent chromium (Cr(VI)) is highly toxic as a natural contaminant. Therefore, chromium, particularly Cr(VI), must be eliminated from the environment, soil, and water to overcome significant problems due to its accumulation in the environment. There are different approaches such as adsorption, ion exchange, photocatalytic reduction, etc. for removing Cr(VI) from the environment. By converting Cr(VI) to Cr(III), its toxicity is reduced. Cr(III) is essential for the human diet, even in small amounts. Today, biopolymers such as alginate, cellulose, gum, pectin, starch, chitin, and chitosan have received much attention for the removal of environmental pollutants. Biopolymers, particularly polysaccharides, are very useful compounds due to their OH and NH₂ functional groups and some advantages such as biodegradability, biocompatibility, and accessibility. Therefore, they can be widely applied in catalytic applications and as efficient adsorbents for the removal of toxic compounds from the environment. This review briefly investigates the application of polysaccharide-based (nano)materials for efficient Cr(VI) removal from the environment using adsorption/reduction, photocatalytic, and chemical reduction mechanisms.

Development of alginate@tin oxide-cobalt oxide nanocomposite based catalyst for the treatment of wastewater

In this study, tin oxide‑cobalt oxide nanocatalyst was prepared by a simple method, which grew in spherical particles with an average diameter of 30 nm. Tin oxide-cobalt oxide was further wrapped in alginate polymer hydrogel (Alg@tin oxide-cobalt oxide), and both materials were utilized as nanocatalysts for the catalytic transformation of different pollutants. Tin oxide-cobalt oxide and Alg@tin oxide-cobalt oxide nanocatalysts were tested for the catalytic reduction of 4-nitrophenol, congo red, methyl orange, methylene blue (MB) and potassium ferricyanide in which sodium borohydride was used as a reducing agent. Tin oxide-cobalt oxide and Alg@tin oxide-cobalt oxide nanocatalysts synergistically reduced MB in shorter time (2.0 and 4.0 min) compared to other dyes. The reduction conditions were optimized by changing different parameters. The rate constants for MB reduction were calculated and found to be 1.5714 min^-1 and 0.6033 min^-1 using tin oxide-cobalt oxide and Alg@tin oxide-cobalt oxide nanocatalysts, respectively. Implementing Alg@tin oxide-cobalt oxide nanocatalyst toward MB reduction in real samples proved its efficacy in sea and well water samples. The catalyst could be easily recovered, recycled and revealed a minimal loss of nanoparticles, which offering a competition and replacement with reputable commercial catalysts.

Protection, disinfection, and immunization for healthcare during the COVID-19 pandemic: Role of natural and synthetic macromolecules

The world is trying to improve public health while the outbreak of the COVID-19 is at its worst. So far, countless people have died from the COVID-19 disease and it is still a serious threat to human health. Synthetic and natural polymers are unavoidable materials in the healthcare sector. During the COVID-19 outbreak, diverse medical equipment and devices were designed and developed by using these macromolecules for the protection, disinfection, and immunization applications. Synthetic polymers such as polypropylene, polystyrene, poly(lactic acid), poly(ethylene terephthalate), and so forth have been successfully applied for the design and fabrication of diverse face masks, shields, anti-viral coatings, as well as diagnostic kits. Natural polymers having great features such as biodegradability and environmentally friendly are made from algae, plants, and animals. These polymers including sodium alginate, chitosan, cellulose, and gums have been shown a critical role in the fabrication of personal protective equipment, immunosensors, and anti-viral spray for control and fight against COVID-19. Besides, the problem of plastic waste can be solved by replacing them with natural polymers. This mini-review aims to show the application of polymer-based materials during the COVID-19 epidemic.

Toxicity and remediation of pharmaceuticals and pesticides using metal oxides and carbon nanomaterials

The worldwide development of agriculture and industry has resulted in contamination of water bodies by pharmaceuticals, pesticides and other xenobiotics. Even at trace levels of few micrograms per liter in waters, these contaminants induce public health and environmental issues, thus calling for efficient removal methods such as adsorption. Recent adsorption techniques for wastewater treatment involve metal oxide compounds, e.g. Fe2O3, ZnO, Al2O3 and ZnO-MgO, and carbon-based materials such as graphene oxide, activated carbon, carbon nanotubes, and carbon/graphene quantum dots. Here, the small size of metal oxides and the presence various functional groups has allowed higher adsorption efficiencies. Moreover, carbon-based adsorbents exhibit unique properties such as high surface area, high porosity, easy functionalization, low price, and high surface reactivity. Here we review the cytotoxic effects of pharmaceutical drugs and pesticides in terms of human risk and ecotoxicology. We also present remediation techniques involving adsorption on metal oxides and carbon-based materials.

Removal of Lead, Cadmium, and Aluminum Sulfate from Simulated and Real Water with Native and Oxidized Starches

The separation of toxic pollutants such as Pb2+, Cd2+, and Al3+ from water is a constant challenge as contamination of natural water bodies is increasing. Al3+ and especially Pb2+ and Cd2+ are ecotoxic and highly toxic for humans, even in ppb concentrations, and therefore removal below a dangerous level is demanding. Herein, the potential adsorber material starch, being ecofriendly, cheap, and abundantly available, was investigated. Thus, four different native starch samples (potato, corn, waxy corn, and wheat starch) and two oxidized starches (oxidized potato and corn starch) were comprehensively analyzed with streaming potential and charge density measurements, SEM-EDX, ATR-FTIR, 1H-NMR, and TGA. Subsequently, the starch samples were tested for the adsorption of Pb2+, Cd2+, and Al3+ from the respective sulfate salt solution. The adsorption process was analyzed by ICP-OES and SEM-EDX, and the adsorption isotherms were fitted comparing Langmuir, Sips, and Dubinin-Radushkevich models. Oxidized starch, for which chemical modification is one of the simplest, and also native potato starch were excellent natural adsorber materials for Al3+, Cd2+, and especially Pb2+ in the low concentration range, exhibiting maximum adsorption capacities of 84, 71, and 104 µmol/g for oxidized potato starch, respectively.

Glycogen nanoparticles as a potential corrosion inhibitor

Biological macromolecules are proven to be potential green corrosion inhibitors because of their outstanding structural features and eco-friendliness. This study is aimed at enhancing their corrosion mitigation capabilities by converting them into nanoparticles. This is the first work where nanoparticles of biological macromolecules are exploited for corrosion mitigation studies. Glycogen nanoparticles (GLY-Np) were synthesized by microwave-mediated nanoprecipitation method and characterized by ATR-FTIR, XRD, UV-Visible Spectroscopy, FESEM analysis, EDX, TEM, and Zeta potential measurements. They are used as an eco-friendly inhibitor for corrosion control of zinc in sulfamic acid (NH₂SO₃H). The electrochemical study was a primary experimental tool employed for corrosion rate measurement. Conditions were optimized to obtain maximum inhibition efficiency by varying concentrations of inhibitor and temperature. Activation and thermodynamic parameters were evaluated and discussed in detail. A suitable adsorption isotherm was proposed to fit the experimental results. Adsorption of the inhibitor was confirmed by SEM, EDX, and AFM techniques. The inhibition efficiency of 92% was obtained for 0.02 gL^-1 GLY-Np. Thus, GLY-Np turned out to be an effective green inhibition with economic benefits.

Review on characteristics of biomaterial and nanomaterials based polymeric nanocomposite membranes for seawater treatment application

Membrane technology, especially nanofiltration (NF) has great attention to provide an imperative solution for water issues. The membrane is considered to be the heart in the separation plant. Understanding the membrane characteristics could allow predicting and optimizing the membrane performance namely flux, rejection and reduced fouling. The membrane development using biomaterials and nanomaterials provides a remarkable opportunity in the water application. This review focuses on the membrane characteristics of biomaterials and nanomaterials based nanofiltration. In this review, recent researches based on biomaterials and nanomaterials loaded membrane for salt rejection have been analyzed. Membrane fouling depends on the membrane characteristics and this review defined fouling as a ubiquitous bottleneck challenge that hampers the NF blooming applications. Fouling mitigation strategies via membrane modification using biomaterial (chitosan, curcumin and vanillin) and various other nanomaterials are critically reviewed. This review also highlights the membrane cleaning and focuses on concentrates disposal methods with zero liquid discharge system for resource recovery. Finally, the conclusion and future prospects of membrane technology are discussed. From this current review, it is apparent that the biomaterial and various other nanomaterials acquire exclusive properties that facilitate membrane advancement with improved capability for water treatment. Regardless of membrane material developments, still exist considerable difficulties in membrane commercialization. Thus, additional studies related to this field are needed to produce membranes with better performance for large‒scale applications.

Ag@ZnO/MWCNT ternary nanocomposite as an active and stable catalyst for the 4-nitrophenol reduction in water

The nitroaromatic compounds, known as organic pollutants, have arising attention due to their carcinogenic character, highly dangerous to human health. In this work, the Ag@ZnO/MWCNT ternary nanocomposite synthesized via conjugation of sonochemical and solvothermal treatments manifests high performance in the reduction of 4-nitrophenol in the aqueous media (TOF value of 246 min^-1μmol metal^-1). The incorporation of MWCNT onto the nanocomposite structure favored the reusing of the catalysts even after eight consecutive catalytic runs without catalysts cleaning nor product removal. Obtained samples were characterized by XRD, TEM, UV-vis, Raman and FTIR spectroscopies. It was found that ultrasonic treatment at relatively moderate conditions leads to functionalization of MWCNT, the appearance of C=C and OH groups and change of electronic properties of Ag@ZnO/MWCNT composite which provide its stable material dispersion in aqueous solution and high catalytic performance in the 4-nitrophenol reduction. This technique may be effectively applied for the functionalization of carbon including materials for their usage in an aqueous media.