Green immobilization: Enhancing enzyme stability and reusability on eco-friendly support

In the current years of heightened focus on green chemistry and sustainable materials, this study delves into the untapped potential of hyaluronic acid (HA), chitin, and chitosan-prominent polysaccharides for groundbreaking applications. The primary aim is to effectively immobilize catalase enzymes onto matrices composed of chitosan, chitin, HA/chitin, and HA/chitosan. The rigorous investigation covers a spectrum of structural enhancements encompassing pH and temperature stability, thermal resilience, half-life extension, storage durability, reusability, and comprehensive FTIR analyses of the catalase immobilization. Notably, catalase activity demonstrated remarkable resilience on HA/chitin and HA/chitosan matrices, maintaining 73.80% and 79.55% efficacy even after 25 cycles. The introduction of covalent cross-linking between catalase and HA/chitin or HA/chitosan, facilitated by a cross-linking agent, significantly amplified stability and recycling efficiency. Consequently, the immobilized catalase showcases substantial promise across a spectrum of industrial applications, spanning from food and detergent production to bioremediation and diverse commercial processes. This underscores its pivotal role as a versatile and invaluable innovation in the realm of sustainable technologies.

Chitin nanofibrils assisted 3D printing all-chitin hydrogels for wound dressing

The direct ink writing technique used in 3D printing technology is generally applied to designing biomedical hydrogels. Herein, we proposed a strategy for preparing all-chitin-based inks for wound dressing via direct ink writing technique. The β-chitin nanofibers (MACNF) with a high aspect ratio were applied as a nanofiller to modulate the rheological properties of the alkaline dissolved chitin solution. The printing fidelity significantly depends on the MACNF introduction amount to the composite ink. 5-10 wt% MACNF ratio showed superior printing performance. The printed scaffold showed a uniform micron-sized pore structure and a woven network of nanofibers. Due to the good biocompatibility of chitin and the stereoscopic spatial skeleton, this scaffold showed excellent performance as a wound dressing, which can promote cell proliferation, collagen deposition and the angiogenesis of wounds, demonstrating its potential in biomedical applications. This approach successfully balanced the chitinous printability and biofunctions.

Alternative processes to produce chitin, chitosan, and their oligomers

Sustainable recovery of chitin and its derivatives from shellfish waste will be achieved when the industrial production of these polymers is achieved with a high control of their molecular structure, low costs, and acceptable levels of pollution. Therefore, the conventional chemical method for obtaining these biopolymers needs to be replaced or optimized. The goal of the present review is to ascertain what alternative methods are viable for the industrial-scale production of chitin, chitosan, and their oligomers. Therefore, a detailed review of recent literature was undertaken, focusing on the advantages and disadvantages of each method. The analysis of the existing data allows suggesting that combining conventional, biological, and alternative methods is the most efficient strategy to achieve sustainable production, preventing negative impacts and allowing for the recovery of high added-value compounds from shellfish waste. In conclusion, a new process for obtaining chitinous materials is suggested, with the potential of reducing the consumption of reagents, energy, and water by at least 1/10, 1/4, and 1/3 part with respect to the conventional process, respectively.

In vitro and in silico studies of the potential cytotoxic, antioxidant, and HMG CoA reductase inhibitory effects of chitin from Indonesia mangrove crab (Scylla serrata) shells

This study aimed to characterize chitin extracted from Indonesia mangrove crab (Scylla serrata) shells, as well as to assess its in vitro cytotoxic, antioxidant, and HMG CoA reductase inhibitory potentials. In silico molecular docking, molecular dynamic, and ADMET prediction analyses were also carried out. Chitin was extracted from mangrove crab shells using deproteination and demineralization processes, Scanning Electron Microscopy (SEM) and Fourier Transform Infrared (FTIR) characterization are then performed. The MTT method was further tested in a study of cell viability, while in vitro method was used to assess HMG CoA reductase inhibitory and antioxidant activities. The extracted chitin was found to have a moderate level of cytotoxic and antioxidant activities. In vitro studies showed that it has an IC50 of 36,65 ± 0,082 μg/mL as an HMG CoA reductase inhibitor, and decreased enzyme activity by 68.733 % at 100 μg/mL as a concentration. Furthermore, in the in silico study, chitin showed a strong affinity to several targets, including HMG CoA reductase, HMG synthase, LDL receptor, PPAR-alfa, and HCAR-2 with binding energies of -5.7; -5.8; -3.6; -5.6; -4.6 kcal/mol, respectively. Based on the ADMET properties, it had non-toxic molecules, which were absorbed and distributed across the blood-brain barrier. The molecular dynamics (MD) simulation also showed that it remained stable in the active sites of HMG CoA reductase receptor for 100 ns. These results indicated that chitin from Indonesian mangrove crab shells can be used to develop more potent HMG CoA reductase inhibitor with antioxidant and cytotoxic activities for effective dyslipidemia therapy.

An optimized artificial blood feeding assay to study tick cuticle biology

Ticks, ectoparasitic arachnids, are prominent disease vectors impacting both humans and animals. Their unique blood-feeding phase involves significant abdominal cuticle expansion, sharing certain similarities with insects. However, vital aspects, including the mechanisms of cuticle expansion, changes in cuticular protein composition, chitin synthesis, and cuticle function, remain poorly understood. Given that the cuticle expansion is crucial for complete engorgement of the ticks, addressing these knowledge gaps is essential. Traditional tick research involving live animal hosts has inherent limitations, such as ethical concerns and host response variability. Artificial membrane feeding systems provide an alternative approach, offering controlled experimental conditions and reduced ethical dilemmas. These systems enable precise monitoring of tick attachment, feeding parameters, and pathogen acquisition. Despite the existence of various methodologies for artificial tick-feeding systems, there is a pressing need to enhance their reproducibility and effectiveness. In this context, we introduce an improved tick-feeding system that incorporates adjustments related to factors like humidity, temperature, and blood-feeding duration. These refinements markedly boost tick engorgement rates, presenting a valuable tool for in-depth investigations into tick cuticle biology and facilitating studies on molting. This refined system allows for collecting feeding ticks at specific stages, supporting research on tick cuticle biology, and evaluating chemical agents' efficacy in the engorgement process.

Functional analysis of basidiomycete specific chitin synthase genes in the agaricomycete fungus Pleurotus ostreatus

Chitin is an essential structural component of fungal cell walls composed of transmembrane proteins called chitin synthases (CHSs), which have a large range of reported effects in ascomycetes; however, are poorly understood in agaricomycetes. In this study, evolutionary and molecular genetic analyses of chs genes were conducted using genomic information from nine ascomycete and six basidiomycete species. The results support the existence of seven previously classified chs clades and the discovery of three novel basidiomycete-specific clades (BI-BIII). The agaricomycete fungus Pleurotus ostreatus was observed to have nine putative chs genes, four of which were basidiomycete-specific. Three of these basidiomycete specific genes were disrupted in the P. ostreatus 20b strain (ku80 disruptant) through homologous recombination and transformants were obtained (Δchsb2, Δchsb3, and Δchsb4). Despite numerous transformations Δchsb1 was unobtainable, suggesting disruption of this gene causes a crucial negative effect in P. ostreatus. Disruption of these chsb2-4 genes caused sparser mycelia with rougher surfaces and shorter aerial hyphae. They also caused increased sensitivity to cell wall and membrane stress, thinner cell walls, and overexpression of other chitin and glucan synthases. These genes have distinct roles in the structural formation of aerial hyphae and cell walls, which are important for understanding basidiomycete evolution in filamentous fungi.

Exploring the potential of chitosan/aragonite biocomposite derived from cuttlebone waste: Elaboration, physicochemical properties and in vitro bioactivity

Cuttlefish bone biowaste is a potential source of a composite matrix based on chitin and aragonite. In the present work, we propose for the first time the elaboration of biocomposites based on chitosan and aragonite through the valorization of bone waste. The composition of the ventral and dorsal surfaces of bone is well studied by ICP-OES. An extraction process has been applied to the dorsal surface to extract β-chitin and chitosan with controlled physico-chemical characteristics. In parallel, aragonite isolation was carried out on the ventral side. The freeze-drying method was used to incorporate aragonite into the chitosan polymer to form CHS/ArgS biocomposites. Physicochemical characterizations were performed by FT-IR, SEM, XRD, 1H NMR, TGA/DSC, potentiometry and viscometry. The ICP-OES method was used to evaluate in vitro the bioactivity level of biocomposite in simulated human plasma (SBF), enabling analysis of the interactions between the material and SBF. The results obtained indicate that the CHS/ArgS biocomposite derived from cuttlefish bone exhibits bioactivity, and that chitosan enhances the bioactivity of aragonite. The CHS/ArgS biocomposite showed excellent ability to form an apatite layer on its surface. After three days' immersion, FTIR and SEM analyses confirmed the formation of this layer.

Chitin-mediated blockade of chitinase-like proteins reduces tumor immunosuppression, inhibits lymphatic metastasis and enhances anti-PD-1 efficacy in complementary TNBC models

BACKGROUND

Chitinase-like proteins (CLPs) play a key role in immunosuppression under inflammatory conditions such as cancer. CLPs are enzymatically inactive and become neutralized upon binding of their natural ligand chitin, potentially reducing CLP-driven immunosuppression. We investigated the efficacy of chitin treatment in the context of triple-negative breast cancer (TNBC) using complementary mouse models. We also evaluated the immunomodulatory influence of chitin on immune checkpoint blockade (ICB) and compared its efficacy as general CLP blocker with blockade of a single CLP, i.e. chitinase 3-like 1 (CHI3L1).

METHODS

Female BALB/c mice were intraductally injected with luciferase-expressing 4T1 or 66cl4 cells and systemically treated with chitin in combination with or without anti-programmed death (PD)-1 ICB. For single CLP blockade, tumor-bearing mice were treated with anti-CHI3L1 antibodies. Metastatic progression was monitored through bioluminescence imaging. Immune cell changes in primary tumors and lymphoid organs (i.e. axillary lymph nodes and spleen) were investigated through flow cytometry, immunohistochemistry, cytokine profiling and RNA-sequencing. CHI3L1-stimulated RAW264.7 macrophages were subjected to 2D lymphatic endothelial cell adhesion and 3D lymphatic integration in vitro assays for studying macrophage-mediated lymphatic remodeling.

RESULTS

Chitin significantly reduced primary tumor progression in the 4T1-based model by decreasing the high production of CLPs that originate from tumor-associated neutrophils (TANs) and Stat3 signaling, prominently affecting the CHI3L1 and CHI3L3 primary tumor levels. It reduced immunosuppressive cell types and increased anti-tumorigenic T-cells in primary tumors as well as axillary lymph nodes. Chitin also significantly reduced CHI3L3 primary tumor levels and immunosuppression in the 66cl4-based model. Compared to anti-CHI3L1, chitin enhanced primary tumor growth reduction and anti-tumorigenicity. Both treatments equally inhibited lymphatic adhesion and integration of macrophages, thereby hampering lymphatic tumor cell spreading. Upon ICB combination therapy, chitin alleviated anti-PD-1 resistance in both TNBC models, providing a significant add-on reduction in primary tumor and lung metastatic growth compared to chitin monotherapy. These add-on effects occurred through additional increase in CD8α+ T-cell infiltration and activation in primary tumor and lymphoid organs.

CONCLUSIONS

Chitin, as a general CLP blocker, reduces CLP production, enhances anti-tumor immunity as well as ICB responses, supporting its potential clinical relevance in immunosuppressed TNBC patients.

Response surface optimization, purification, characterization and short-chain chitooligosaccharides production from an acidic, thermostable chitinase from Thermomyces dupontii

Chitin, recovered in huge amounts from coastal waste, may biocatalytically valorized for utilization in food and biotech sectors. Conventional chemical-based conversion makes use of significant volumes of hazardous acid and alkali. Alternatively, enzymes offer better process control and generation of homogeneous products. Process variables were derived to achieve augmented levels of chitinase (3.8809 Ul-1 h-1) productivity from a novel thermophilic fungal strain Thermomyces dupontii, ITCC 9104 following incubation (96 h, 45 °C). An acidic thermostable chitinase TdChiT having molecular mass of 60 kDa has been purified. Optimal TdChiT activity has been demonstrated at 70 °C and pH 5. Notably decreased activity over a broad range of temperature and pH was observed following deglycosylation. Half-life, activation energy, Gibbs free energy, enthalpy and entropy for denaturation of TdChiT at its optimum temperature were 197.40 min, 105.48 kJ mol-1, 100.59 kJ mol-1, 102.64 kJ mol-1 and 5.95 J mol-1 K-1. TdChiT has specificity towards colloidal chitin and (GlcNAc)2-4. Metal ions viz. Mn2+, Ca2+ and Co2+ and nonionic surfactants notably enhanced chitinase activity. Thin layer chromatography analysis has revealed effective hydrolysis of colloidal chitin and (GlcNAc)2-4. TdChiT may potentially be employed for design of better, eco-friendly and less resource-intensive industrial procedures for upcycling of crustacean waste into value-added organonitrogens.

Influence of processes and life cycle on their physicochemical characteristics

Breeding of the black soldier fly is carried out to produce proteins. It is accompanied by releases during the life cycle of this insect. This work is a study of the valorization of these rejects through the production of chitins and chitosans with controlled characteristics. An extraction process is developed with an order of treatments and reaction conditions that provide chitins with high contents. These contents increase as the stages of the life cycle progress and drop for the adult. However, the exuviae chitins present organic impurities which will be eliminated at the N-deacetylation reaction for pupe and after a purification treatment for chitosan from larval stages. All these chitins have an α structure although certain physicochemical characteristics of the larval exuviae chitins are close to those presented by γ chitin. The observed shifts are linked to the effect of impurities rather than to a difference in structure. N-deacetylation of chitins makes possible the valorization of all rejects by the production of pure chitosans with high yields which retain a porous structure for the exuviae and fibrous for the adult which allow complementary applications. These chitosans are highly to completely deacetylated and their molar masses can vary depending on the process and life stage.

Chitin microspheres: From fabrication to applications

Chitin microspheres (CMs) have attracted increasing attention due to their biocompatibility, uniform size and shape, large surface area, and porous structure. Considerable research efforts have been focused on developing CMs and promoting their applications in various areas. In this context, this review aims to describe the most recent progress in the fabrication and application of CMs. Different routes that can be used to prepare CMs, such as the drip method and the emulsion method, are emphatically introduced. Moreover, the applications of CMs as drug delivery systems, wound dressings, three-dimensional (3D) scaffolds, water purification, and functional supporting materials in the fields of biomedicine, tissue engineering, environmental protection, and energy storage are also highlighted. We hope this review can provide a comprehensive and useful database for further innovation of CMs.

Surface defects due to bacterial residue on shrimp shell

The changes in the surface chemistry and morphological structure of chitin forms obtained from shrimp shells (ShpS) with and without microorganisms were evaluated. Total mesophilic aerobic bacteria (TMAB), estimated Pseudomonas spp. and Enterococcus spp. were counted in Shp-S by classical cultural counting on agar medium, where the counts were 6.56 ± 0.09, 6.30 ± 0.12, and 3.15 ± 0.03 CFU/g, respectively. Fourier Transform Infrared (FTIR) Spectroscopy and Scanning Electron Microscopy (SEM)/Energy dispersed X-ray (EDX) were used to assess the surface chemistry/functional groups and morphological structure for ChTfree (non-microorganism), and ChTmo (with microorganisms). ChTfree FTIR spectra presented a detailed chitin structure by OH, NH, and CO stretching vibrations, whereas specific peaks of chitin could not be detected in ChTmo. Major differences were also found in SEM analysis for ChTfree and ChTmo. ChTfree had a flat, prominent micropore, partially homogeneous structure, while ChTmo had a layered, heterogeneous, complex dense fibrous, and lost pores form. The degree of deacetylation was calculated for ChTfree and ChTmo according to FTIR and EDX data. The results suggest that the degree of deacetylation decreases in the presence of microorganisms, affecting the production of beneficial components negatively. The findings were also supported by the molecular docking model.

Pretreatment of shrimp shells with an acidic deep eutectic solvent system for chitin extraction and its enhanced performance as a carrier for immobilized lipase

Existing methods for chitin extraction usually produce substantial waste, which poses ecological hazards. Natural deep eutectic solvent (NADES) offers a promising one-step pretreatment alternative, replacing the resource-intensive demineralization (DM) and deproteinization (DP) process. Hence, in this study, the influence of various acidic NADES, on achieving a simplified one-step DM and DP in the chitin extraction process was investigated. The study yielded chitin with 87.73 % purity, and microstructural analysis showed that NADES pretreatment minimally affected chitin quality without deacetylation. In addition, chitin extracted using choline chloride-oxalic acid as a carrier displayed excellent performance in the immobilization of Geobacillus thermocatenulatus lipase 2 (GTL2) because of obvious Ca2+ activation effect. This process contributed to enhancement of immobilized enzyme activity. The immobilized GTL2 showed excellent hydrolytic capabilities, with its highest activity reaching 547.80 ± 20.62 U/mg, significantly better than the five commercial lipases that exhibited <40 % of the enzyme activity. Furthermore, the hydrolytic capacity of immobilized GTL2 was notably high for 4-nitrophenyl butyrate, measuring 935.47 ± 51.60 U/mg. This study provided a constructive approach for the one-step pretreatment of shrimp shells with organic acid-based NADES to isolate and purify chitin and its potential application as an immobilized carrier to enhance enzyme activity.

Chitin: A versatile biopolymer-based functional therapy for cartilage regeneration

Chitin is the second most abundant biopolymer and its inherent biological characteristics make it ideal to use for tissue engineering. For many decades, its properties like non-toxicity, abundant availability, ease of modification, biodegradability, biocompatibility, and anti-microbial activity have made chitin an ideal biopolymer for drug delivery. Research studies have also shown many potential benefits of chitin in the formulation of functional therapy for cartilage regeneration. Chitin and its derivatives can be processed into 2D/3D scaffolds, hydrogels, films, exosomes, and nano-fibers, which make it a versatile and functional biopolymer in tissue engineering. Chitin is a biomimetic polymer that provides targeted delivery of mesenchymal stem cells, especially of chondrocytes at the injected donor sites to accelerate regeneration by enhancing cell proliferation and differentiation. Due to this property, chitin is considered an interesting polymer that has a high potential to provide targeted therapy in the regeneration of cartilage. Our paper presents an overview of the method of extraction, structure, properties, and functional role of this versatile biopolymer in tissue engineering, especially cartilage regeneration.

Chitin/calcite composite extracted from shell waste as a low-cost adsorbent for removal of tetracycline and ciprofloxacin: Effects and mechanisms

Recently, water contamination caused by the misuse of antibiotics has become a growing concern. In this study, an economical chitin/calcite composite (CCA) was extracted from crab shell waste, and the effects and mechanisms of its removal of ciprofloxacin (CIP) and tetracycline (TC) from aqueous solution were investigated. The functional groups of chitin and the metal phase of calcite gave CCA the ability to remove antibiotics. Experiments on kinetics, isothermal adsorption, thermodynamics, co-removal, and reusability were conducted to systematically explore the adsorption performances of CCA toward antibiotics. The pseudo-second-order (FSO) and Langmuir models suited the data obtained from experiments best and displayed a good fit for the chemisorption and a certain homogeneity of adsorption sites. At 25 °C, the maximum adsorption capacities (Qmax) toward CIP and TC were 228.86 and 150.76 mg g-1, respectively. The adsorption mechanisms of CCA with TC and CIP are pH dependent since pH can affect the surface charge of CCA and the form in which CIP and TC are existing. The X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) demonstrated that the keto-O and carboxyl groups of CIP and the carbonyl, hydroxyl, and amido groups of TC could be responsible for the binding with the calcite and the functional groups of chitin through surface complexation, cation bridge and hydrogen bonding.

Physicochemical comparison of chitin characteristics in three major stored-product beetle pests: Implications for biofumigant toxicity

The present study investigates the chitin properties of stored-product insect pests and their association with the fumigant toxicity of garlic essential oil. Chitin isolates of Callosobruchus maculatus, Sitophilus oryzae, and Tribolium castaneum adults were characterized using FT-IR, XRD, EA, SEM-EDS, and NMR techniques. Fumigant toxicity assay was performed under airtight condition in glass vial. The S. oryzae contains highest chitin content (19 %), followed by T. castaneum (10 %) and C. maculatus (8 %). The degree of crystallinity was lower in C. maculatus (67.13 %) than in S. oryzae (77.05 %) and T. castaneum (76.56 %). Morphologically, C. maculatus chitin displayed a flat lamellar surface with pores, while S. oryzae and T. castaneum exhibited densely arranged microfibrils based surfaces. Fumigant toxicity assays revealed varied susceptibility levels, C. maculatus exhibited higher susceptibility (0.27 μL/L air of LC50) compared to S. oryzae and T. castaneum (14.35 and 3.74 μL/L air of LC50, respectively) to garlic essential oil. The higher chitin content, greater crystallinity, and densely arranged structures in S. oryzae might contribute to its tolerance towards fumigant. Additionally, physico-chemical properties and penetration potentiality of the bioactive constituents might be linked to the toxicity in insects. Understanding these relations can enrich knowledge of chitin's role in fumigant toxicity mechanism.

Chitin-induced disease resistance in plants: A review

Chitin is composed of N-acetylglucosamine units. Chitin a polysaccharide found in the cell walls of fungi and exoskeletons of insects and crustaceans, can elicit a potent defense response in plants. Through the activation of defense genes, stimulation of defensive compound production, and reinforcement of physical barriers, chitin enhances the plant's ability to defend against pathogens. Chitin-based treatments have shown efficacy against various plant diseases caused by fungal, bacterial, viral, and nematode pathogens, and have been integrated into sustainable agricultural practices. Furthermore, chitin treatments have demonstrated additional benefits, such as promoting plant growth and improving tolerance to abiotic stresses. Further research is necessary to optimize treatment parameters, explore chitin derivatives, and conduct long-term field studies. Continued efforts in these areas will contribute to the development of innovative and sustainable strategies for disease management in agriculture, ultimately leading to improved crop productivity and reduced reliance on chemical pesticides.

Scalable synthesis of N, O co-doped hierarchical porous carbon for high energy density supercapacitors

Rational design of hierarchical porous architecture with abundant pseudocapacitive sites is highly desirable for carbon electrode materials. However, the lengthy production process and high economic input limit its broader application. Herein, we successfully prepared N, O co-doped hierarchical porous carbon (NOHC) through hydrothermal carbonization (HTC) of chitin biomass with the assist of NH4Cl and subsequent carbonization with NaNH2. The optimal NOHC600 exhibits a remarkable hierarchical porous structure and an ultrahigh specific surface area (SSA) of 2555 m2 g-1. Furthermore, it showcases a significant content of N, O co-doping, thereby providing abundant defects and additional active sites for ion adsorption. The aforementioned characteristics ensure outstanding capacitance performance of NOHC600. In the three-electrode system, NOHC600 exhibits a remarkable specific capacitance of up to 455 F g-1 at a current density of 0.5 A g-1. The symmetric supercapacitors (SCs) based on NOHC600 achieve an impressive energy density of 30.4 Wh kg-1 at a power density of 180 W kg-1. Moreover, the all-solid-state NOHC600 microsupercapacitors (MSCs) demonstrate an exceptional areal capacitance of 78.2 mF cm-2 and an areal energy density of up to 10.8 μWh cm-2. Accordingly, this facile and scalable strategy shows a great potential for producing high-heteroatom-doped porous carbon materials from chitin biomass, which can be applied in practical energy-related applications.

Breaking down barriers: comprehensive functional analysis of the Aspergillus niger chitin synthase repertoire

BACKGROUND

Members of the fungal kingdom are heterotrophic eukaryotes encased in a chitin containing cell wall. This polymer is vital for cell wall stiffness and, ultimately, cell shape. Most fungal genomes contain numerous putative chitin synthase encoding genes. However, systematic functional analysis of the full chitin synthase catalogue in a given species is rare. This greatly limits fundamental understanding and potential applications of manipulating chitin synthesis across the fungal kingdom.

RESULTS

In this study, we conducted in silico profiling and subsequently deleted all predicted chitin synthase encoding genes in the multipurpose cell factory Aspergillus niger. Phylogenetic analysis suggested nine chitin synthases evolved as three distinct groups. Transcript profiling and co-expression network construction revealed remarkably independent expression, strongly supporting specific role(s) for the respective chitin synthases. Deletion mutants confirmed all genes were dispensable for germination, yet impacted colony spore titres, chitin content at hyphal septa, and internal architecture of submerged fungal pellets. We were also able to assign specific roles to individual chitin synthases, including those impacting colony radial growth rates (ChsE, ChsF), lateral cell wall chitin content (CsmA), chemical genetic interactions with a secreted antifungal protein (CsmA, CsmB, ChsE, ChsF), resistance to therapeutics (ChsE), and those that modulated pellet diameter in liquid culture (ChsA, ChsB). From an applied perspective, we show chsF deletion increases total protein in culture supernatant over threefold compared to the control strain, indicating engineering filamentous fungal chitin content is a high priority yet underexplored strategy for strain optimization.

CONCLUSION

This study has conducted extensive analysis for the full chitin synthase encoding gene repertoire of A. niger. For the first time we reveal both redundant and non-redundant functional roles of chitin synthases in this fungus. Our data shed light on the complex, multifaceted, and dynamic role of chitin in fungal growth, morphology, survival, and secretion, thus improving fundamental understanding and opening new avenues for biotechnological applications in fungi.

Enhancing the endo-activity of the thermophilic chitinase to yield chitooligosaccharides with high degrees of polymerization

Thermophilic endo-chitinases are essential for production of highly polymerized chitooligosaccharides, which are advantageous for plant immunity, animal nutrition and health. However, thermophilic endo-chitinases are scarce and the transformation from exo- to endo-activity of chitinases is still a challenging problem. In this study, to enhance the endo-activity of the thermophilic chitinase Chi304, we proposed two approaches for rational design based on comprehensive structural and evolutionary analyses. Four effective single-point mutants were identified among 28 designed mutations. The ratio of (GlcNAc)3 to (GlcNAc)2 quantity (DP3/2) in the hydrolysates of the four single-point mutants undertaking colloidal chitin degradation were 1.89, 1.65, 1.24, and 1.38 times that of Chi304, respectively. When combining to double-point mutants, the DP3/2 proportions produced by F79A/W140R, F79A/M264L, F79A/W272R, and M264L/W272R were 2.06, 1.67, 1.82, and 1.86 times that of Chi304 and all four double-point mutants exhibited enhanced endo-activity. When applied to produce chitooligosaccharides (DP ≥ 3), F79A/W140R accumulated the most (GlcNAc)4, while M264L/W272R was the best to produce (GlcNAc)3, which was 2.28 times that of Chi304. The two mutants had exposed shallower substrate-binding pockets and stronger binding abilities to shape the substrate. Overall, this research offers a practical approach to altering the cutting pattern of a chitinase to generate functional chitooligosaccharides.

One-pot chitin pulping using recyclable superbase-based protic ionic liquid

The application of ionic liquids and deep eutectic solvents offers a promising opportunity for a more environmentally friendly and straightforward chitin purification process from crustacean shells. Nonetheless, the insufficient recyclability of these ionic solvents poses a challenge to the long-term sustainability of such extraction methods. Thus, there is a strong imperative to focus on employing easily recyclable ionic liquids for chitin isolation, enhancing the overall sustainability of the process. In this investigation, a direct chitin purification procedure that utilized pulping liquors consisting of the superbase-based protic ionic liquid 1,5-diazabicyclo[4.3.0]non-5-enium acetate and its precursor, acetic acid, was developed. It was demonstrated that these pulping liquors were capable of simultaneously deproteinate and demineralize shrimp shells to generate chitins with higher purity, degree of N-acetylation and crystallinity than commercially obtained chitin. More significantly, the pulping liquors can be recycled to their pure form in high quantity by simple distillation under reduced pressure, allowing the reuse of these mixtures, which give chitin of nearly identical purity.

Chitin and chitosan from mushroom (Agaricus bisporus) using deep eutectic solvents

In this study, chitin was isolated from a mushroom (Agaricus bisporus) using deep eutectic solvents, choline chloride: acetic acid (CCAA), choline chloride:lactic acid (CCLA) and choline chloride:glycerol (CCG). According to the results, three DES systems were also useful for the isolation of chitin from mushrooms. The deproteinization efficiency was 84.25 %. The degree of deacetylation of chitin isolated by microwave-assisted extraction using CCAA was 69 %. This result was promising to produce chitosan in a one-step, base-free process using deep eutectic solvents. FTIR, XRD, SEM and XPS were used to analyse the physicochemical properties of the chitin.

Maximizing crustaceans (shrimp, crab, and lobster) by-products value for optimum valorization practices: A comparative review of their active ingredients, extraction, bioprocesses and applications

BACKGROUND

The processing of the three major crustaceans (shrimp, lobster, and crab) is associated with inevitable by-products, high waste disposal costs, environmental and human health issues, loss of multiple biomaterials (chitin, protein hydrolysates, lipids, astaxanthin and minerals). Nowadays, these bioresources are underutilized owing to the lack of effective and standardized technologies to convert these materials into valued industrial forms.

AIM OF REVIEW

This review aims to provide a holistic overview of the various bioactive ingredients and applications within major crustaceans by-products. This review aims to compare various extraction methods in crustaceans by-products, which will aid identify a more workable platform to minimize waste disposal and maximize its value for best valorization practices.

KEY SCIENTIFIC CONCEPTS OF REVIEW

The fully integrated applications (agriculture, food, cosmetics, pharmaceuticals, paper industries, etc.) of multiple biomaterials from crustaceans by-products are presented. The pros and cons of the various extraction methods, including chemical (acid and alkali), bioprocesses (enzymatic or fermentation), physical (microwave, ultrasound, hot water and carbonic acid process), solvent (ionic liquids, deep eutectic solvents, EDTA) and electrochemistry are detailed. The rapid development of corresponding biotechnological attempts present a simple, fast, effective, clean, and controllable bioprocess for the comprehensive utilization of crustacean waste that has yet to be applied at an industrial level. One feasible way for best valorization practices is to combine innovative extraction techniques with industrially applicable technologies to efficiently recover these valuable components.

miR-306-5p is involved in chitin metabolism in Aedes albopictus pupae via linc8338-miR-306-5p-XM_019678125.2 axis

Aedes albopictus can transmit several lethal arboviruses. This mosquito has become a sever public health threat due to its rapidly changing global distribution. Chitin, which is the major component of the cuticle and peritrophic membrane (PM), is crucial for the growth and development of insect. microRNAs (miRNAs) play important roles in the posttranscriptional level regulation of gene expression, thereby influencing many biological processes in insects. In this study, an attempt was made to evaluate the role of miR-306-5p in regulating chitin metabolism in Ae. albopictus pupae. Overexpression of miR-306-5p resulted in a significantly reduced survival rate in pupae and an increased malformation rate in adults. Both in vivo and in vitro evidence confirmed the presence of the competing endogenous RNA (ceRNA) regulatory axis (linc8338-miR-306-5p-XM_019678125.2). RNAi of linc8338 and XM_019678125.2 had effects on pupae similar to those of miR-306-5p. The highest expression level of miR-306-5p was found in the midgut, and alteration in the expression of miR-306-5p, XM_019678125.2 and linc8338 induced increased transcript levels of chitin synthase 2 (AaCHS2) and decreased chitinase 10 (AaCht10); as well as increased thickness of the midgut and enlarged midgut epithelial cells. The results of this study highlight the potential of miR-306-5p as a prospective target in mosquito control and confirm that the ceRNA mechanism is involved in chitin metabolism. These findings will provide a basis for further studies to uncover the molecular mechanisms through which ncRNAs regulate chitin metabolism.

Functional importance of groups I and II chitinases, CHT5 and CHT10, in turnover of chitinous cuticle during embryo hatching and post-embryonic molting in the red flour beetle, Tribolium castaneum

Chitinases (CHT) comprise a large gene family in insects and have been classified into at least eleven subgroups. Many studies involving RNA interference (RNAi) have demonstrated that depletion of group I (CHT5s) and group II (CHT10s) CHT transcripts causes lethal molting arrest in several insect species including the red flour beetle, Tribolium castaneum, presumably due to failure of degradation of chitin in their old cuticle. In this study we investigated the functions of CHT5 and CHT10 in turnover of chitinous cuticle in T. castaneum during embryonic and post-embryonic molting stages. RNAi and transmission electron microscopic (TEM) analyses indicate that CHT10 is required for cuticular chitin degradation at each molting period analyzed, while CHT5 is essential for pupal-adult molting only. We further analyzed the functions of these genes during embryogenesis in T. castaneum. Real-time qPCR analysis revealed that peak expression of CHT10 occurred prior to that of CHT5 during embryonic development as has been observed at post-embryonic molting periods in several other insect species. With immunogold-labeling TEM analysis using a fluorescein isothiocyanate-conjugated chitin-binding domain protein (FITC-CBD) probe, chitin was detected in the serosal cuticle but not in any other regions of the eggshell including the chorion and vitelline membrane layers. Injection of double-stranded RNA (dsRNA) for CHT5 (dsCHT5), CHT10 (dsCHT10) or their co-injection (dsCHT5/10) into mature adult females had no effect on their fecundity and the resulting embryos developed normally inside the egg. There were no obvious differences in the morphology of the outer chorion, inner chorion and vitelline membrane among eggs from these dsRNA-treated females. However, unlike dsCHT5 eggs, dsCHT10 and dsCHT5/10 eggs exhibited failure of turnover of the serosal cuticle in which the horizontal chitinous laminae remained intact, resulting in lethal embryo hatching defects. These results indicate that group I CHT5 is essential for pupal-adult molting, whereas group II CHT10 plays an essential role in cuticular chitin degradation in T. castaneum during both embryonic hatching and all of the post-embryonic molts. CHT10 can serve in place of CHT5 in chitin degradation, except during the pupal-adult molt when both enzymes are indispensable to complete eclosion.

Response surface methodology-based optimisation of chitin production and its antioxidant activity from Aspergillusniger

- In this study, we focused on isolating fungi capable of producing extracellular chitin, a critical component of fungal cell walls. Aspergillus niger was chosen as the candidate, and we aimed to optimise chitin production. Initially, one variable at a time (OVAT) method was used to enhance chitin yield under the best fermentation conditions. Subsequently, the Plackett-Burman design was employed to identify the key medium components influencing chitin production. These factors were then fine-tuned using the Central Composite Design, resulting in the optimal concentrations of dipotassium hydrogen phosphate (0.7 mg/l), calcium chloride (0.5 mg/l), thymine hydrochloride (0.5 mg/l), and pH (4), as confirmed by ANOVA. The application of response surface methodology (RSM) led to a remarkable improvement in chitin yield, increasing it from 1.14 g/l to an impressive 4.42 g/l, a substantial 3.34-fold enhancement compared to unoptimized conditions. Additionally, we explored the antioxidant activity of the produced chitin, revealing its promising properties with a scavenging activity ranging from 32% to 55% at concentrations of 1-2 mg/ml, surpassing the control. In conclusion, our study successfully optimized chitin production from Aspergillus niger and demonstrated the remarkable antioxidant potential of the produced chitin, highlighting its significance in various applications.

A review on versatile applications of biomaterial/polycationic chitosan: An insight into the structure-property relationship

Chitosan is a versatile and generous biopolymer obtained by alkaline deacetylation of naturally occurring chitin, the second most abundant biopolymer after cellulose. The excellent physicochemical properties of polycationic chitosan are attributed to the presence of varied functional groups such as amino, hydroxyl, and acetamido groups enabling researchers to tailor the structure and properties of chitosan by different methods such as crosslinking, grafting, copolymerization, composites, and molecular imprinting techniques. The prepared derivatives have diverse applications in the food industry, water treatment, cosmetics, pharmaceuticals, agriculture, textiles, and biomedical applications. In this review, numerous applications of chitosan and its derivatives in various fields have been discussed in detail with an insight into their structure-property relationship. This review article concludes and explains the chitosan's biocompatibility and efficiency that has been done so far with future usage and applications as well. Moreover, the possible mechanism of chitosan's activity towards several emerging fields such as energy storage, biodegradable packaging, photocatalysis, biorefinery, and environmental bioremediation are also discussed. Overall, this comprehensive review discusses the science and complete information behind chitosan's wonder function to improve our understanding which is much needful as well as will pave the way towards a sustainable future.

Glycerol/organic acid-based ternary deep eutectic solvents as a green approach to recover chitin with different molecular weight from seafood waste

In this study, we designed a green and efficient approach for the fractionation of high-purity chitin with tunable molecular weights from seafood waste. This was achieved by using ternary deep eutectic solvents (TDESs) composed of choline chloride as a hydrogen bond acceptor, glycerol as the polyol-based hydrogen bond donor, together with lactic acid or malic acid. Two binary DESs and four TDESs were evaluated for their ability to recover chitin. The extracted chitin exhibited not only high yield with excellent protein and mineral removal, but also high purity with similar crystallinity patterns as standard chitin. However, the average molecular weights, viscosity behavior and morphology of chitin extracted by DESs were varied and influenced by organic acid to glycerol molar ratios. The molecular weights of chitin extracted by lactic acid-based TDES ranged from 264 kDa to 541 kDa, but malic acid-based TEDS displayed a stronger depolymerization effect, resulting in chitin with a smaller molecular weight of less than 300 kDa. Lactic acid-based TDES revealed that the purity of chitin remained higher than 92 % after three cycles. This sustainable and environmentally friendly extraction system holds great potential to recover chitin from seafood waste, opening a new era for chitin extraction and applications.

Flexible and ultrasensitive piezoresistive electronic skin based on chitin/sulfonated carbon nanotube films

Wearable electronic skin has gained increasing popularity due to its remarkable properties of high flexibility, sensitivity, and lightweight, making it an ideal choice for detecting human physiological activity. In this study, we successfully prepared e-skin using regenerated chitin (RCH) and sulfonated carbon nanotubes (SCNTs). The e-skin demonstrated brilliant mechanical and sensing properties, exhibiting a sensitivity of 1.75 kPa-1 within the 0-5 kPa range and a fast response-recovery time of <10 ms. Furthermore, it displayed an ultra-low detection limit of 1.39 Pa (5 mg), exceptional stability (up to 11,000 cycles), and a remarkable mechanical strength, reaching up to 50 MPa. Moreover, the e-skin was fabricated through a simple and economical approach. With the popularity of micro sensing devices, the e-skin holds tremendous potential for various applications, including wearable electronic devices, health and sports monitoring, artificial intelligence and other fields.

Crustacean-inspired chitin-based flexible buffer layer with a helical cross-linked network for bamboo fiber/poly(3-hydroxybutyrate) biocomposites

Marine biological resources, serving as a renewable and sustainable reservoir, holds significant import for the utilization of composite material. Hence, we produced bamboo fiber/poly(3-hydroxybutyrate) (BF/PHB) biocomposites with exceptional performance and economic viability, drawing inspiration from the resilience of crustacean shells. Polyaminoethyl modified chitin (PAECT) was synthesized using the alkali freeze-thaw method and introduced into the interface between BF and PHB to improve interfacial adhesion. The resulting chitin fibers, characterized by their intertwined helical chains, constructed a flexible mesh structure on the BF surface through an electrostatic self-assembly approach. The interwoven PAECT filaments infiltrated the dual-phase structure, acting as a promoter of interfacial compatibility, while the flexible chitin network provided a greater capacity for deformation accommodation. Consequently, both impact and tensile strength of the BF/PHB composites were notably enhanced. Additionally, this flexible layer ameliorated the thermal stability and crystalline properties of the composites. This investigation aimed to leverage the distinctive helical configuration of chitin to facilitate the advancement of bio-reinforced composites.

Green biorefinery of shrimp shell waste for α-chitin and high-value co-products through successive fermentation by co-lactic acid bacteria and proteolytic fungus

Green biorefinery process was conducted to extract α-chitin and high-value co-products from shrimp shell waste through microbial fermentation using mature coconut water (MCW) as a sole nutrient source. Symbiotic co-lactic acid fermentation (Co-LAF) by Lactobacillus plantarum and Streptococcus thermophilus produced higher levels of lactic acid (LA) and protease activity than their mono-cultures, which led to greater demineralization (DM) and deproteinization (DP) of shrimp shell powder (SSP). After optimizing Co-LAF through Response Surface Methodology and successive fermentation by an acid-active proteolytic fungus Rhizopus oligosporus, the highest DM of 94.0 ± 0.91 % and DP of 86.7 ± 0.1 % were achieved. Based on FT-IR, XRD, and SEM analysis, the bio-extracted chitin had similar structural characteristics to commercial α-chitin but with better quality. These strategies not only contribute to environmentally-friendly and cost-effective extraction of α-chitin (303 ± 18 mg/g-SSP), but also co-produce LA (57.18 ± 0.89 g/L), acid protease (4.33 ± 0.5 U/mL), bio-calcium (277 ± 12 mg-CaSO4/g-SSP), protein hydrolysate (268 ± 5 mg/g-SSP), and pigments (28.78 ± 1.56 µg/g-SSP).

Chitin-based pulps: Structure-property relationships and environmental sustainability

The deconstruction and valorization of chitinous biomass from crustaceans is a promising route for sustainable bioproduct development alternative to petroleum-based materials. However, chitin nanocrystal and chitin nanofibril isolation from crustacean shells is often subjected to extensive processing, compromising their environmental and cost sustainability. To address the sustainability challenge that chitin valorization presents, herein we introduce a mild fibrillation route to generate "chitin pulp"; where a careful control of the macro- and micro-fibrillated chitin with protein and mineral components yields tailored properties. Films produced from protein-rich chitin pulp showed ultimate strength of up to 93 ± 7 MPa. The surface energy and wetting behavior, going from hydrophilic to nearly-hydrophobic, could be tailored as a function of pulp composition. Life cycle assessment of the protein-rich chitin pulps demonstrated that the global warming potential of chitin pulp is reduced by 2 to 3 times when compared to chitin nanocrystals. Overall, this work presents a new and potentially scalable route for the generation of chitin-based materials having a reduced environmental footprint compared to nanochitins and chitosan, thus opening a new route for the valorization of chitin beyond nanochitin for the development of environmentally and economically sustainable materials.

Chitinous material bioconversion by three new chitinases from the yeast Mestchnikowia pulcherrima

BACKGROUND

Chitinases are widely distributed enzymes that perform the biotransformation of chitin, one of the most abundant polysaccharides on the biosphere, into useful value-added chitooligosaccharides (COS) with a wide variety of biotechnological applications in food, health, and agricultural fields. One of the most important group of enzymes involved in the degradation of chitin comprises the glycoside hydrolase family 18 (GH18), which harbours endo- and exo-enzymes that act synergistically to depolymerize chitin. The secretion of a chitinase activity from the ubiquitous yeast Mestchnikowia pulcherrima and their involvement in the post-harvest biological control of fungal pathogens was previously reported.

RESULTS

Three new chitinases from M. pulcherrima, MpChit35, MpChit38 and MpChit41, were molecularly characterized and extracellularly expressed in Pichia pastoris to about 91, 90 and 71 mU ml- 1, respectively. The three enzymes hydrolysed colloidal chitin with optimal activity at 45 ºC and pH 4.0-4.5, increased 2-times their activities using 1 mM of Mn2+ and hydrolysed different types of commercial chitosan. The partial separation and characterization of the complex COS mixtures produced from the hydrolysis of chitin and chitosan were achieved by a new anionic chromatography HPAEC-PAD method and mass spectrometry assays. An overview of the predicted structures of these proteins and their catalytic modes of action were also presented. Depicted their high sequence and structural homology, MpChit35 acted as an exo-chitinase producing di-acetyl-chitobiose from chitin while MpChit38 and MpChit41 both acted as endo-chitinases producing tri-acetyl-chitotriose as main final product.

CONCLUSIONS

Three new chitinases from the yeast M. pulcherrima were molecularly characterized and their enzymatic and structural characteristics analysed. These enzymes transformed chitinous materials to fully and partially acetylated COS through different modes of splitting, which make them interesting biocatalysts for deeper structural-function studies on the challenging enzymatic conversion of chitin.

An overview of the potential application of chitosan in meat and meat products

Chitosan is considered the second most ubiquitous polysaccharide next to cellulose. It has gained prominence in various industries including biomedicine, textile, pharmaceutical, cosmetic, and notably, the food industry over the last few decades. The polymer's continual attention within the food industry can be attributed to the increasing popularity of greener means of packaging and demand for foods incorporated with natural alternatives instead of synthetic additives. Its antioxidant, antimicrobial, and film-forming abilities reinforced by the polymer's biocompatible, biodegradable, and nontoxic nature have fostered its usage in food packaging and preservation. Microbial activity and lipid oxidation significantly influence the shelf-life of meat, resulting in unfavorable changes in nutritional and sensory properties during storage. In this review, the scientific studies published in recent years regarding potential applications of chitosan in meat products; and their effects on shelf-life extension and sensory properties are discussed. The utilization of chitosan in the form of films, coatings, and additives in meat products has supported the extension of shelf-life while inducing a positive impact on their organoleptic properties. The nature of chitosan and its compatibility with various materials make it an ideal biopolymer to be used in novel arenas of food technology.

Valorization of biological waste from insect-based food industry: Assessment of chitin and chitosan potential

Edible mealworms can be farmed to produce high-quality nutrients and proteins, useful as ingredients in human and animal foods. During this process biological waste is produced. This work explores the usage of the biological waste as source to produce chitin and chitosan with different potential applications. Different waste fractions were processed, and the feasibility of chitin isolation was assessed. Chitosan was derived, and films were fabricated and tested for intended uses. Data indicate that biopolymers with different properties can be obtained from multiple biological waste fractions. All samples show antibacterial activity, while chitosan films derived from molt show interesting properties for packaging purposes. Films also trigger the expression of anti-inflammatory phenotype markers in macrophage cells, which may be useful for tissue engineering implantation purposes. Altogether, biological waste from insect farming can be used to extract chitin and chitosan with different properties, and therefore, suitable for different applications.

Mixed organic and inorganic nitrogen sources enhance chitosan yield in novel isolates of Penicillium

Chitosan, a valuable biopolymer, has traditionally been derived from marine sources. However, exploring fungal alternatives offers a sustainable supply. This research investigates the potential of chitosan production from fungal sources, focusing on the optimization of abiotic factors using two novel Penicillium strains (IITISM-ANK1 and IITISM-ANK2) isolated from dry aged sludge. Box-Behnken model and standard statistical analysis were deployed to develop an equation predicting the effect of carbon and nitrogen sources, pH, and temperature on chitosan production. Batch experiments validate the model's accuracy under optimized conditions. The results indicate that mixed organic and inorganic nitrogen sources in the form of peptone, nitrate, and ammonium salts enhanced chitosan yield in both isolates. At optimal conditions for the chitosan production of IITISM-ANK2 and IITISM-ANK1 were found to be 293.29 mg/L and 325.01 mg/L, with the degree of deacetylation of over 74 % which is a critical parameter for chitosan quality. Thus, these isolates can be used as a potent microbe for industrial chitosan production and contribute to advancing sustainable chitosan production and its potential industrial applications.

Non-invasive characterization of the elastic protein resilin in insects using Raman spectroscopy

Resilin is an extremely efficient elastic protein found in the moving parts of insects. Despite many years of resilin research, we are still only just starting to understand its diversity, native structures, and functions. Understanding differences in resilin structure and diversity could lead to the development of bioinspired elastic polymers, with broad applications in materials science. Here, to better understand resilin structure, we offer a novel methodology for identifying resilin-rich regions of the insect cuticle using non-invasive Raman spectroscopy in a model species, the desert locust (Schistocerca gregaria). The Raman spectrum of the resilin-rich semilunar process of the hind leg was compared with that of nearby low-resilin cuticle, and reference spectra and peaks assigned for these two regions. The main peaks of resilin include two bands associated with tyrosine at 955-962 and 1141-1203 cm-1 and a strong peak at 1615 cm-1, attributed to the α-Amide I group associated with dityrosine. We also found the chitin skeletal modes at ~485-567 cm-1 to be significant contributors to spectra variance between the groups. Raman spectra were also compared to results obtained by fluorescence spectroscopy, as a control technique. Principal component analysis of these resulting spectra revealed differences in the light-scattering properties of resilin-rich and resilin-poor cuticular regions, which may relate to differences in native protein structure and relative abundance.

Antibacterial and hemostatic chitin sponge directly constructed from Pleurotus Eryngii via top-down approach

Chitin, the second most abundant polysaccharide on earth, possesses unique characteristics, including biosafety, biodegradability, and procoagulant activity, making it an attractive material for hemostasis. However, the conventional bottom-up construction of chitin-based materials is intricate and time-consuming. In this study, we have developed a top-down strategy to prepare a 3D porous chitin-based hemostatic sponge with exceptional hemostatic properties and antibacterial activity, directly from the spongy Pleurotus eryngii. The top-down method involves deproteinization, in situ quaternization, and tannin acid crosslinking. The obtained sponge has an interconnected microporous structure with high porosity (89.7 ± 3.2 %), endowing it with high water absorption (2047 ± 105 %) and rapid water-triggered shape-memory behavior (< 2 s). The sponge exhibits superior blood coagulant activity and outperforms standard medical gauze, gelatin sponge, and chitosan sponge in both topical artery and non-compressive liver puncture wound. In addition, the sponge exhibited significant antibacterial activity against both gram-positive Staphylococcus aureus and gram-negative Escherichia coli. In summary, this study provides a straightforward and practical approach for constructing an antibacterial and hemostatic chitin sponge that could be a valuable option for treating bleeding wounds.

Study on the deacetylation and mechanism of chitin in natural deep eutectic solvent

A large number of hydrogen bonds is the main reason for hindering the dissolution and reaction of chitin, and a mild and green deacetylation method to prepare chitosan for a wider range of applications is urgent. As a non-toxic and degradable green solvent, the deep eutectic solvent can effectively interfere with the hydrogen bond network of chitin, making chitin more susceptible to other solvents. Therefore, a NADES system consisting of betaine and glycerol was proposed for application in the deacetylation reaction of chitin to facilitate further attack of N-acetyl groups by low concentrations of NaOH. After optimizing the reaction conditions, chitosan with 83.77 % deacetylation was prepared, requiring only a concentration of 25 wt% NaOH. The analysis of the product chitosan showed that NADES could not only effectively improve the degree of deacetylation, but also reduce the degree of damage to the molecular weight by alkali. In addition, the potential mechanisms involved in the deacetylation process by NADES were explored. The nature of the reaction was verified by FT-IR, XRD and theoretical calculations as the process of opening intra/intermolecular hydrogen bonds of chitin by NADES. More importantly, experimental and in-depth theoretical studies provide a reference for the green preparation of chitosan.

Automated Real-Time Monitoring of Extracellular pH to Assess Early Plant Defense Signaling

Extracellular alkalinization mediated by the inhibition of plasma membrane-located proton pumping ATPases hallmarks the initiation of defense signaling in plant cells. Early defense responses also include depolarization of the plasma membrane, increase in cytosolic Ca2+ concentration, and an oxidative burst. Together these early signaling events lead to the activation of plant immunity. The transient alkalinization response is triggered by well-studied pathogen-derived and plant endogenous elicitors, including, for example, bacterial flagellin, fungal chitin, and tomato systemin in both model and agronomic species. Employing cell suspension cultures, extracellular alkalinization can be easily assessed by measuring the elicitor-induced pH changes of the cultivating medium. Here, we provide a protocol for an improved alkalinization assay in a system which is able to simultaneously monitor multiple samples, and fully automatically transfer customizable real-time pH records. In this system flagellin, chitin and systemin elicit robust time- and dose-dependent responses, proving a powerful tool for assessing plant early defense signaling.

A chitin-based magnetic hyper-cross-linked polymer for highly efficient enrichment of neonicotinoids in lemon juice and tomatoes

A chitin-based magnetic hyper-cross-linked polymer (labeled as Ch-MHCP) has been successfully synthesized and utilized for highly-effective solid-phase extraction of neonicotinoid insecticides (NEOs). The extraction capability of Ch-MHCP for four common NEOs is higher than that of four commercial sorbents including octadecyl-silane C18, oasis hydrophilic/lipophilic balanced sorbent, oasis mixed anion sorbent and poly-phenylacetic mixed anion sorbent. The large number of hydroxyl and amide groups as well as benzene rings in Ch-MHCP allow the H-bond and π-π* interaction to be the principal adsorption mechanism of Ch-MHCP for NEOs. Besides, polar interaction was also involved in the adsorption process. In combination of Ch-MHCP based extraction technique with high-performance liquid chromatography, a novel analytical method for sensitive detection of NEOs in lemon juice and tomatoes has been established. At optimal conditions, wide linear ranges were obtained to be 0.20-100 ng mL-1 for lemon juice and 0.80-1000 ng g-1 for tomatoes. The detection limits were 0.06-0.12 ng mL-1 for lemon juice and 0.24-0.60 ng g-1 for tomatoes. This work not only provides a powerful tool for simultaneously detecting four NEOs in lemon juice and tomatoes, but also offers a new insight into the preparation of bio-based magnetic sorbents for adsorption/removal of pollutants.

Reevaluation and novel insights into amino sugar and neutral sugar necromass biomarkers in archaea, bacteria, fungi, and plants

Soil microbial necromass is an important contributor to soil organic matter (>50%) and it is largely composed of microbial residues. In soils, fragmented cell wall residues are mostly found in their polysaccharide forms of fungal chitin and bacterial peptidoglycan. Microbial necromass biomarkers, particularly amino sugars (AS) such as glucosamine (GlcN) and muramic acid (MurA) have been used to trace fungal and bacterial residues in soils, and to distinguish carbon (C) found in microbial residues from non-microbial organic C. Neutral sugars (NS), particularly the hexose/pentose ratio, have also been proposed as tracers of plant polysaccharides in soils. In our study, we extended the range of biomarkers to include AS and NS compounds in the biomass of 120 species belonging to archaea, bacteria, fungi, or plants. GlcN was the most common AS found in all taxa, contributing 42-91% to total AS content, while glucose was the most common NS found, contributing 56-79% to total NS. We identified talosaminuronic acid, found in archaeal pseudopeptidoglycan, as a new potential biomarker specific for Euryarchaeota. We compared the variability of these compounds between the different taxonomic groups using multivariate approaches, such as non-metric multidimensional scaling (NMDS) and partial least squares discriminant analysis (PLS-DA) and statistically evaluated their biomarker potential via indicator species analysis. Both NMDS and PLS-DA showcased the variability in the AS and NS contents between the different taxonomic groups, highlighting their potential as necromass residue biomarkers and allowing their extension from separating bacterial and fungal necromass to separating microbes from plants. Finally, we estimated new conversion factors where fungal GlcN is converted to fungal C by multiplying by 10 and MurA is converted to bacterial C by multiplying by 54. Conversion factors for talosaminuronic acid and galactosamine are also proposed to allow estimation of archaeal or all-microbial necromass residue C, respectively.

Assessing toxicity mechanism of silver nanoparticles by using brine shrimp (Artemia salina) as model

The acute toxicity of silver nanoparticles (AgNPs) in Artemia salina is primarily attributed to the interaction between silver ions (Ag+) and chitin, which constitutes the main structural component of the organism's cuticle. To investigate this interaction and gain a deeper understanding of its nature, geometric optimization calculations and symmetry-adapted perturbation theory (SAPT0) analysis were performed. These calculations aimed to determine the most favorable conformation based on the binding energies of silver ions with chitin and to elucidate the underlying mechanisms of their interaction. The results indicate an ionic effect dependent on the ion state, with simulations revealing that Ag3+ ions have the potential to cause significant deformation of the chitin structure. Furthermore, this study evaluated the behavior of AgNPs using nauplii of A. salina instar I, assessing both mortality rates and cell damage. Toxicity of AgNPs was observed in A. salina at concentrations of 50 and 100 ppm within a timeframe of 24-48 h. The toxicity of AgNPs can be attributed to their interaction with the cuticle and subsequent modification of the chitin structure through the binding of ionic silver. Light microscopy (LM) analysis confirmed the presence of AgNPs in the cuticle, while confocal laser scanning microscopy (CLSM) revealed cellular damage. In addition, this research offers new perspectives on the toxicity mechanism of AgNPs by introducing a novel model that explores the interaction of silver ions with the cuticle of A. salina. These insights are derived from a combination of atomistic models and ecotoxicology assays.

Quantitative Measurement of Pattern-Triggered ROS Burst as an Early Immune Response in Tomato

The rapid accumulation of extracellular "reactive oxygen species" (ROS), also known as the "oxidative burst", is an early plant immune response triggered by pathogen-derived microbe-associated molecular patterns and by endogenous plant signaling molecules. The oxidative burst is often used as a readout for the activation of defense signaling. Here, we present a detailed protocol for the continuous measurement of ROS production in leaf discs of tomato plants, using a chemiluminescence-based assay in a microtiter plate format. We also include recommendations for data analysis and for the quantitative assessment of differences in ROS burst dynamics, as caused by different types of elicitors, or in different tomato genotypes.

Extraction and characterization of Chitosan from Shell of Borassus flabellifer and their antibacterial and antioxidant applications

Chitosan is a bio-polymer made up of repeating units of N-acetyl glucosamine and glucosamine joined together by (1-4)-glycosidic linkages. Various bioresources have been used to develop bioactive materials that have a wide range of applications in different fields, including industry and medicine. Borassus flabellifer is a well-known source of chitin in the sub-Indian continent and is used in digestion, pharmaceuticals, and other applications. Chitin can be extracted from B. flabellifer fruit shells through demineralization and deproteinization and then converted into chitosan through deacetylation. This study aimed to investigate the biological activity of chitosan extracted from B. flabellifer fruit shells and to analyze its molecular structure using FT-IR analysis. Results showed the presence of NH, OH, and CO stretching, indicating the presence of various functional groups in chitosan. Scanning electron microscopic study revealed the topography of the chitosan. Well-diffusion and MIC tests showed that chitosan exhibited activity against E. coli and S. aureus. The chitosan extract also exhibited potential antioxidant polymer by scavenging free radicals.

Sustainable valorization approaches on crustacean wastes for the extraction of chitin, bioactive compounds and their applications - A review

The unscientific disposal of the most abundant crustacean wastes, especially those derived from marine sources, affects both the economy and the environment. Strategic waste collection and management is the need of the hour. Sustainable valorization approaches have played a crucial role in solving those issues as well as generating wealth from waste. The shellfishery wastes are rich in valuable bioactive compounds such as chitin, chitosan, minerals, carotenoids, lipids, and other amino acid derivatives. These value-added components possessed pleiotropic applications in different sectors viz., food, nutraceutical, cosmeceutical, agro-industrial, healthcare, and pharmaceutical sectors. The manuscript covers the recent status, scope of shellfishery management, and different bioactive compounds obtained from crustacean wastes. In addition, both sustainable and conventional routes of valorization approaches were discussed with their merits and demerits along with their combinations. The utilization of nano and microtechnology was also included in the discussion, as they have become prominent research areas in recent years. More importantly, the future perspectives of crustacean waste management and other potential valorization approaches that can be implemented on a large scale.

Physicochemical characterization of chitin extracted by different treatment sequences from an edible insect

Chitin present in the shell of edible insects is a potential source of chitin, lipids, and proteins, and it exerts various biological activities. Thus far, only a few studies have focused on the use of chitin as a source of high-protein-diet oligosaccharides. The use of insect chitin for the production of high-protein-diet oligosaccharides can lessen the reliance on diet crops. Moreover, although chitin composition in Tenebrio molitor larva, pupa, and adult has been extensively investigated, chitin extraction from T. molitor larval whole body and exuvium has received poor attention. The present study compared the effectiveness of two techniques for extracting high-protein-diet chitin oligosaccharide from an edible insect (T. molitor). Two different extraction sequences of chitin from the larval stage (molitor stage larvae) and adult stage (molitor stage adult) of edible T. molitor were investigated. Two processing steps were employed: (a) deproteinization (DEP) and (b) demineralization (DEM) treatments. Differences in the order, conditions, and period of their application resulted in two different chitin extraction procedures. The viscosity, degree of polymerization, and crystallinity index of the chitin extracted using the two procedures were measured, and its chemical components (chitin, ash, protein, fat, and moisture contents) were determined. T. molitor adults and larvae treated sequentially with DEM-DEP demonstrated the greatest yield of approximately 14.62 % ± 0.15 and 6.096 % ± 0.10 %, respectively. By contrast, when treated sequentially with DEP-DEM, the recorded yields were 10.96 % ± 0.18 and 5.31 % ± 0.38, respectively. Differences in the degree of deacetylation between both methods were observed. Additionally, Fourier transform infrared spectroscopy and X-ray diffractometry of the extracted chitin along with a commercial sample revealed consistent chain conformation, mean hydrogen bonding, and crystallinity index. In this way, residues produced by farmed edible insects can be recovered and used as a novel source of chitin.

Investigation on Akis granulifera (Coleoptera, Sahlberg, 1823) as a potential source of chitin and chitosan: Extraction, characterization and hydrogel formation

The majority of studies have focused on the industrial exploitation of marine fisheries waste through the production of natural bioactive bioploymeres such as chitin and chitosan. However, in recent years, beetles are increasingly attracting the interest of scientists as a source of chitin and chitosan for the preparation of hydrogels for sustainable engineering development. In the present work, we focus on the study for the first time a new Moroccan species of beetle (Akis granulifera Sahlberg, 1823), for the extraction of chitin and the elaboration of chitosan. A chemical extraction process was used. Then, physicochemical characterizations by FT-IR, SEM, XRD, 1H NMR, TGA/DSC, Potentiometry, Viscosimetry, and elemental analysis were performed. In addition, to evaluate its physicochemical quality, the elaborated chitosan is combined with alginate to form a hydrogel. This hydrogel was effectively characterized by SEM, DRX and FTIR to show the potential of chitosan from Akis granulifera in biomaterial applications.

Solid-state mechanochemical synthesis of chitosan from mud crab (Scylla serrata) chitin

This study presents a method for solvent-free mechanochemical synthesis of chitosan from chitin, sourced from the shells of mud crabs (Scylla serrata). The procedure involves a sequence of demineralization and deproteinization to extract chitin from the crab shells, followed by mechanochemical deacetylation. The chitin was deacetylated by grinding it as a solid blend with sodium hydroxide (NaOH) using a stainless steel mortar and pestle. After grinding, chitosan is isolated from the blend by repetitive washing and centrifugation. The chitosan product is then characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction analysis. These characterization techniques confirm the successful deacetylation of chitin to form chitosan. A high degree of deacetylation (DD) is achieved when the weight ratio of NaOH to chitin is 1:1 or higher, implying that the DD value can be enhanced by increasing this weight ratio. The mechanochemical reaction mechanism involves the hydroxyl groups on the NaOH particles reacting with the acetamide groups of the chitin strands, yielding solid chitosan and sodium acetate. This mechanochemical deacetylation approach is more practical than the conventional heterogeneous deacetylation in strong basic solutions, since it could suppress depolymerization of the resulting chitosan and requires significantly less base. This makes it a promising method for large-scale industrial applications.

Cloning and biochemical characterization of a recombinant chitinase encoded by the CHT4 gene from Candida albicans

As one of the major components in the fungal cell wall, chitin is a polymer of β-1,4-linked N-acetylglucosamine. Chitinases are hydrolytic enzymes that break down glycosidic bonds in the chitin. The human fungal pathogen Candida albicans has three chitinase-encoding genes, CaCHT1, CaCHT2 and CaCHT3. The CaCHT4 gene encodes a protein with the glycoside hydrolase family GH18 domain, Glyco_18, which suggests that CaCht4 might be a chitinase. In the present study, we have cloned, expressed and purified the N-terminally His6-tagged CaCht4 protein from bacterial cells. Further biochemical characterization has shown that this recombinant CaCht4 protein shows both exochitinase (chitobiosidase) and endochitinase activities, but has no N-acetylglucosaminase activity. The optimal temperature for the exochitinase activity of CaCht4 is 55 °C. Taken together, these data support that the CaCHT4 gene encodes a chitinase. Our finding provides a basis for us to understand the biological functions of the CaCHT4 gene in C. albicans.