Edible films and coatings in seafood preservation: A review

Formation of heterocyclic aromatic amines with the structure of aminoimidazoazarenes in food products

Thermal food processing has many beneficial consequences, although it also produces some unintentional undesired effects, such as the formation of potentially mutagenic and carcinogenic substances. Among them, the formation of heterocyclic aromatic amines (HAAs) has been related to the declared carcinogenicity of processed meats. In spite of this importance, HAA formation pathways remain mostly unknown, which avoids the design of targeted procedures to inhibit HAA appearance. The objective of this review is to collect information recently appeared that allow advancing in the understanding of how these compounds are produced. Particularly, the possibility that aminoimidazoazarenes are produced similarly to PhIP is discussed, including their formation by cyclizations and oligomerizations of aldehydes and creatinine under usual cooking conditions. Present data suggest that HAA formation might be related to the pool of carbonyl compounds existing in foods, the food carbonylome, which can be controlled by carbonyl-trapping agents, such as amine and phenolic compounds.

Application of Protein-Based Films and Coatings for Food Packaging: A Review

As the IV generation of packaging, biopolymers, with the advantages of biodegradability, process ability, combination possibilities and no pollution to food, have become the leading food packaging materials. Biopolymers can be directly extracted from biomass, synthesized from bioderived monomers and produced directly by microorganisms which are all abundant and renewable. The raw materials used to produce biopolymers are low-cost, some even coming from agrion dustrial waste. This review summarized the advances in protein-based films and coatings for food packaging. The materials studied to develop protein-based packaging films and coatings can be divided into two classes: plant proteins and animal proteins. Parts of proteins are referred in this review, including plant proteins i.e., gluten, soy proteins and zein, and animal proteins i.e., casein, whey and gelatin. Films and coatings based on these proteins have excellent gas barrier properties and satisfactory mechanical properties. However, the hydrophilicity of proteins makes the protein-based films present poor water barrier characteristics. The application of plasticizers and the corresponding post-treatments can make the properties of the protein-based films and coatings improved. The addition of active compounds into protein-based films can effectively inhibit or delay the growth of microorganisms and the oxidation of lipids. The review also summarized the research about the storage requirements of various foods that can provide corresponding guidance for the preparation of food packaging materials. Numerous application examples of protein-based films and coatings in food packaging also confirm their important role in food packaging materials.

Humectability and physical properties of hydroxypropyl methylcellulose coatings with liposome-cellulose nanofibers: Food application

The objective of this study was to investigate the physical, rheological and humectability properties of edible coating forming suspensions (ECS) based on hydroxypropyl methylcellulose (HPMC) containing: liposomes that encapsulate rutin, glycerol and cellulose nanofibers on sliced surfaces of almonds and chocolate. On average, liposomes measured between 110.6 ± 10.0 nm and were characterized as stable and homogeneous suspensions. Adding these liposomes to the edible coatings produced significant changes (p< 0.05) in the density and surface tension, which favor the final appearance of the coating. The presence of liposomes increased the apparent viscosity of the ECS, showing a purely viscous and fluid behavior with a good fit (R² = 0.9996) with the Power Law model. The presence of liposomes and cellulose nanofibers decreased the value of the cohesive energy of the ECS. The studied ECS partially hydrate the surfaces of almond and chocolate as they showed contact angles under 90°.

Effects of chitosan-based coatings on storage quality of Chinese shrimp

We investigated the effects of chitosan-based coatings on the preservation quality of refrigerated Chinese shrimp for 12 days. Samples of Chinese shrimp were subjected to three different coating treatments, namely chitosan (CH), chitosan and ε-polylysine (CH + ε-PL), chitosan combined with ε-polylysine and carrageenan (CH + ε-PL + CA), and compared with a control. The bacteriological characteristics [total viable count (TVC)], chemical indexes including pH, thiobarbituric acid (TBA) value, K-value, and total volatile basic nitrogen (TVB-N), texture (hardness, chewiness, and elasticity), and sensory changes were assessed. The increases in TVC, pH, TBA, K-value, and TVB-N were observed to be delayed by preservation treatments, and the textural and sensory characteristics indicated that the treated shrimp were preserved more effectively than the control. Treatment with chitosan combined with ε-polylysine and carrageenan was the most effective preservation method than treatment with chitosan alone or chitosan and ε-polylysine; the shelf life was also prolonged. Therefore, treatment with chitosan combined with ε-polylysine and carrageenan is proposed as a potential method for shelf life extension of Chinese shrimp for refrigerated storage.

Chitosan dispersed in aqueous solutions of acetic, glycolic, propionic or lactic acid as a thickener/stabilizer agent of O/W emulsions produced by ultrasonic homogenization

Chitosan is a natural polycationic polysaccharide with several known biotechnological functionalities, but its application in food products as ingredient or additive remains nowadays unusual. Additionally, ultrasonic production of food-grade emulsions is still an open research field, so ultrasound applicability for such purpose must be evaluated case by case. In this study, chitosan was dispersed in acid aqueous media containing acetic, glycolic, propionic or lactic acid (50 mmol·L^-1), then added of the emulsifier Tween 20, and finally mixed to sunflower oil, through ultrasonic homogenization (20 kHz, 500 W, 4 min), in order to prepare O/W emulsions (oil fraction = 0.25). In all studied systems, oil droplets with average hydrodynamic diameter < 600 nm were obtained. The increase of chitosan concentration promoted the augment in consistency and the elastic character of the emulsions. Emulsions containing more than 0.500 g·(100 g)^-1 of chitosan presented a minor increase of both oil droplets average hydrodynamic diameter and PDI, during storage for 28 days. Furthermore, such systems showed no phase separation when exposed to centrifugation, freeze-thawing, and freeze-thaw-heating cycles. Two main findings may be highlighted from this study: i) ultrasound processing is a promising approach to produce food-grade emulsified systems containing chitosan, and ii) chitosan is a suitable alternative as thickener/stabilizer for acidic emulsions, being its performance influenced by the biopolymer concentration and not by the organic acid present in the medium.

Effect of Transglutaminase Cross-Linking in Protein Isolates from a Mixture of Two Quinoa Varieties with Chitosan on the Physicochemical Properties of Edible Films

The growing demand for minimally processed foods with a long shelf life and environmentally friendly materials has forced industry to develop new technologies for food preservation and handling. The use of edible films has emerged as an alternative solution to this problem, and mixtures of carbohydrates and proteins, may be formulated to improve their properties. The objective of this work was to evaluate the effect of protein cross-linking with transglutaminase (TG) of two varieties of quinoa protein isolate (Chenopodium quinoa) [Willd (QW), and Pasankalla (QP)] on the physicochemical and barrier properties of edible films based on chitosan (CT)-quinoa protein. The evaluated properties were water vapor permeability (WVP), solubility, adsorption, roughness determined by atomic force microscopy, and the interactions among the main film components determined by Raman spectroscopy. The results indicated that TG interacted with lysine of QW and QP. CT:QW (1:5, w/w) showed the lowest solubility (14.02 ± 2.17% w/w). WVP varied with the composition of the mixture. The WVP of CT:quinoa protein ranged from 2.85 to 9.95 × 10−11 g cm Pa−1 cm−2 s−1 without TG, whereas adding TG reduced this range to 2.42–4.69 × 10−11 g cm Pa−1 cm−2 s−1. The addition of TG to CT:QP (1:10, w/w) reduced the film surface roughness from 8.0 ± 0.5 nm to 4.4 ± 0.3 nm. According to the sorption isotherm, the addition of TG to CT-QW films improved their stability [monolayer (Xm) = 0.13 ± 0.02 %]. Films with a higher amount of cross-linking showed the highest improvement in the evaluated physical properties, but interactions among proteins that were catalyzed by TG depended on the protein source and profile.

Natural products with preservative properties for enhancing the microbiological safety and extending the shelf-life of seafood: A review

Seafood is highly perishable, presenting a rapid loss of its quality soon after capture. Temperature is the critical parameter that impacts on seafood shelf-life reduction, allowing the growth of foodborne pathogens and spoilage microorganisms. In recent years, the search by additional methods of preserving seafood has increased, able to ensure quality and safety. Several natural preservatives have highlighted and gained considerable attention from the scientific community, consumers, industry, and health sectors as a method with broad action antimicrobial and generally economical. Natural preservatives, from different sources, have been widely studied, such as chitosan from animal sources, essential oils, and plant extracts from a plant source, lactic acid bacteria, and bacteriocins from microbiological sources and organic acid from different sources, all with great potential for use in seafood systems. This review focuses on the natural preservatives studied in seafood matrices, their forms of application, concentrations usually employed, their mechanisms of action, factors that interfere in their use and the synergistic effect of the interactions among the natural preservatives, with a focus for maintenance of quality and ensure of food safety.

Polysaccharide-based component and their relevance in edible film/coating: a review

Purpose

The purpose of this paper is to present an overview of functional properties of the polysaccharide-based component and their application in developing edible film and coating for the food processing sector.

Design/methodology/approach

In this review study, approximately 271 research and review articles focusing on studies related to polysaccharide-based components and their film-forming properties. This article also focused on the application of polysaccharide-based edible film in the food sector.

Findings

From the literature reviewed, polysaccharide components and components-based edible film/coating is the biodegradable and eco-friendly packaging of the materials and directly consumed by the consumer with food. It has been reported that the polysaccharide components have excellent properties such as being nontoxic, antioxidant, antimicrobial, antifungal and with good nutrients. The polysaccharide-based edible film has lipid and gas barrier properties with excellent transparency and mechanical strength. In various studies, researchers worked on the development of polysaccharide-based edible film and coating by incorporating plant based natural antioxidants. This was primarily done for obtaining improved physical and chemical properties of the edible film and coating. In future, the technology of developing polysaccharide-based edible film and coating could be used for extending the shelf life and preserving the quality of fruits and vegetables at a commercial level. There is more need to understand the role of edible packaging and sustainability in the food and environment sector.

Originality/value

Through this review paper, possible applications of polysaccharide-based components and their function property in the formation of the edible film and their effect on fruits, vegetables and other food products are discussed after detailed studies of literature from thesis and journal article.

Comparative Study of Triboelectric Nanogenerators with Differently Woven Cotton Textiles for Wearable Electronics

A comparative study of the electrical performance of triboelectric nanogenerators (TENGs) with plain- and 2/1 twill-woven cotton textiles was conducted. Furthermore, the microstructures of the cotton fiber surfaces were examined to understand the fundamental mechanical interaction among the cotton fibers in the TENGs. The TENG with 2/1 twill-woven cotton textiles exhibited higher output voltages compared to that with plain-woven cotton textiles. The difference in the output voltage between the two types of TENGs resulted from the difference in triboelectric charge generation between the constituent cotton textiles. The higher output voltage of the TENG with 2/1 twill-woven cotton textiles was attributed to the higher density in triboelectric interactions among the cotton fiber molecules.

Influence of chitosan nanoparticles and fennel essential oils (Foeniculum vulgare) on the shelf life of Huso huso fish fillets during the storage

Fish and fishery products are important parts of the human diet, but the microbial, chemical, and physical deteriorations limit their shelf life. Using the modified atmospheric packaging system and edible coatings is one of the main procedures to improve the shelf life of fish. In this research, the effect of chitosan nanoparticles (CNPs) loaded with fennel essential oils along with modified atmosphere packaging (MAP) system on chemical, microbial, and sensorial properties of Huso huso fish fillets during storage at fridge were evaluated. The results showed that coating fish fillets with CNPs and fennel EO significantly reduced the peroxide value, total volatile nitrogen, and thiobarbituric acid value compared with the control samples. Microbial analyses showed a lower number of mesophilic, psychotropic, pseudomonas, and lactic acid bacteria in coated fillets compared with control and MAP packaging. Fish fillets coated with CNPs and EO showed high acceptability in all sensorial attribute through the storage. It can be concluded that using CNPs and fennel EO along with MAP packaging can enhance the shelf life for H. huso fillets up to 18 days in the fridge.

Influence of Nano Titanium Dioxide and Clove Oil on Chitosan-Starch Film Characteristics

The combined effects of nano titanium dioxide (TiO₂-N) and clove oil (CO) on the physico-chemical, biological and structural properties of chitosan (CH)/starch (ST) films were investigated by using a solvent casting method. Results indicated that the incorporation of TiO₂-N could improve the compactness of the film, increase the tensile strength (TS) and antioxidant activity, and decrease the water vapour permeability (WVP). As may be expected, the incorporation of CO into the film matrix decreased TS but increased the hydrophobicity as well as water vapour barrier antimicrobial and antioxidant properties. Fourier-transform infrared spectroscopy (FTIR) data supported intermolecular interactions between TiO₂-N, CO and the film matrix. Use of a scanning electron microscope (SEM) showed that TiO₂-N and CO were well dispersed and emulsified in the film network. Thermogravimetric (TG) and derivative thermogravimetric (DTG) curves demonstrated that TiO₂-N and CO were well embedded in the film matrix, hence this blend film system could provide new formulation options for food packaging materials in the future.

Rethinking the Future of Food Packaging: Biobased Edible Films for Powdered Food and Drinks

In today's society, packaging is essential. Without this, the materials would be messy and ineffective. Despite the importance and key role of packaging, they are considered to be useless, as consumers see it as a waste of resources and an environmental threat. Biopolymer-based edible packaging is one of the most promising solutions to these problems. Thus, inulin, biopolymers such as agar and sodium alginate, and glycerol were used to develop a single use edible material for food packaging. These biofilms were obtained and tested for three months. For inulin-based films, the results highlight improvements not only in physical properties (homogeneity, well-defined margins, light sweet taste, good optical properties, high solubility capacity or, as in the case of some samples, complete solubilization), but also superior mechanical properties (samples with high inulin content into composition had high tensile strength and extremely high elongation values). Even after three months of developing, the values of mechanical properties indicate a strong material. The optimization establishes the composition necessary to obtain a strong and completely water-soluble material. This type of packaging represents a successful alternative for the future of food packaging: they are completely edible, biodegradable, compostable, obtained from renewable resources, and produce zero waste, at low cost.

The Contribution of a Whey Protein Film Incorporated with Green Tea Extract to Minimize the Lipid Oxidation of Salmon (Salmo salar L.)

Active packaging is becoming progressively more significant as a response to the dynamic changes in current consumer demand and market tendencies. Active packaging is projected to interact directly with the packaged food or with the headspace within the package with the aim of maintaining or extending product quality and shelf-life. Aiming for sustainability, the potential application as biodegradable films of whey protein concentrate (WPC) was evaluated. Aromatic plant's extracts present high antioxidant properties, representing an alternative for synthetic food additives. The main objective of this study was to verify the effectiveness of an edible WPC film incorporated with a plant-based extract on retarding the lipid oxidation of fresh salmon. Green tea extract (GTE) was chosen to be incorporated into the active film. Fresh salmon was packaged with the control film (WPC) and with active film (WPC-GTE). The oxidation level of non-packaged samples and packaged samples were tested for different storage times. Four methods were applied to evaluate lipid oxidation state of fresh salmon: peroxide value, p-anisidine value, thiobarbituric acid reactive substances (TBARS) assay, and monitoring of hexanal. The results obtained in this study indicate that the whey protein active film was successfully produced, and it was effective in delaying lipid oxidation of fresh salmon samples until the 14th day of storage.

Microbiological characteristics of smoked and smoked-dried fish processed in Benin

This study aimed to assess the microbiological status of smoked fish (SF) and smoked-dried fish (SDF) processed in Benin, and to identify the contamination factors associated with these products. A total of 66 fish samples, including fresh fish and processed fish, were randomly collected from different processing sites and markets for microbial characterization using standard methods. The aerobic mesophilic bacteria (AMB) density varied from 2.9 to 9.5 Log10 CFU/g. Enterobacteriaceae, Escherichia coli, Bacillus cereus, Clostridium perfringens, yeasts, and molds were present in 63.9%, 27.8%, 55.6%, 58.3%, 61.1%, and 77.8% of samples, respectively, while no Salmonella spp., Listeria monocytogenes, and Staphylococcus aureus were found. The majority (66.7%) of SF samples and 22.2% of SDF samples were not compliant with the acceptable limit of <7.0 Log10 CFU/g recommended by the Health Protection Agency for AMB, whereas the Enterobacteriaceae counts exceeded the recommended level of 4.0 Log10 CFU/g for 50% of SF and 5.6% of SDF samples. Likewise, 38.9% of SF samples were not compliant for E. coli. Microbiological hazard analysis of practices allowed to identify the sensitive steps where hygiene measures need to be emphasized for an improved quality control.

Rapid Evaluation Methods for Quality of Trout (Oncorhynchus mykiss) Fresh Fillet Preserved in an Active Edible Coating

In this study different methods were used to evaluate the effectiveness of a carrageenan coating and carrageenan coating incorporating lemon essential oil (ELO) in preserving the physicochemical and olfactory characteristics of trout fillets stored at 4 °C up to 12 days. The fillet morphological structure was analyzed by histological and immunological methods; lipid peroxidation was performed with the peroxide and thiobarbituric acid reactive substances (TBARS) tests. At the same time, two less time-consuming methods, such as Attenuated Total Reflectance-Fourier Transformed Infrared (ATR-FTIR) spectroscopy and the electronic nose, were used. Uncoated trout fillets (UTF) showed a less compact tissue structure than carrageenan-coated threads (CTF) and coated fillets of carrageenan (active) ELO (ACTF), probably due to the degradation of collagen, as indicated by optical microscopy and ATR-FTIR. UTF showed greater lipid oxidation compared to CTF and ACTF, as indicated by the peroxide and TBARS tests and ATR-FTIR spectroscopy. The carrageenan coating containing ELO preserved the olfactory characteristics of the trout fillets better than the carrageenan coating alone, as indicated by the electronic nose analysis. This study confirms that both carrageenan and ELO containing carrageenan coatings slow down the decay of the physicochemical and olfactory characteristics of fresh trout fillets stored at 4 °C, although the latter is more effective.

Development of dehydrated products from peach palm-tucupi blends with edible film characteristics using refractive window

This study aimed to obtain a dehydrated product with film characteristics with superior functional and technological quality, prepared from different varieties of peach palm (Bactris gasipaes) using the refractance window drying (RW) process. The experiments were carried out at 70 °C and drying was fully performed at an increasing rate. The physicochemical characteristics and mechanical, technological, and morphological properties were determined and the moisture and water activity curves of the different peach palm varieties were assessed. The dehydrated product by refractance window have good visual appearance and bright yellowish color due to the carotenoid content found in the samples used as raw material. All dehydrated products had non-homogenous microstructure, however, the products had low tensile strength, percent elongation, hygroscopicity, and water absorption and solubility, desired properties to obtain a food product. The presence of components such as proteins, lipids, and fibers had important effects on the mechanical properties of the products because the mechanical resistance of the biopolymers is influenced by the cohesion of the constituents of the polymer matrix. The production of a dehydrated product with film characteristics through the RW technique presented some advantages over conventional casting drying as such as short drying times, lower costs and without addition of plasticizers or non-food grade components. In general, the products dehydrated by RW are promising and can be consumed immediately after production as snacks or in the substitution of other ingredients, such as algae in sushi.

An insight into nanocellulose as soft condensed matter: Challenge and future prospective toward environmental sustainability

Nanocellulose, a structural polysaccharide that has caught tremendous interests nowadays due to its renewability, inherent biocompatibility and biodegradability, abundance in resource, and environmental friendly nature. They are promising green nanomaterials derived from cellulosic biomass that can be disintegrated into cellulose nanofibrils (CNF) or cellulose nanocrystals (CNC), relying on their sensitivity to hydrolysis at the axial spacing of disordered domains. Owing to their unique mesoscopic characteristics at nanoscale, nanocellulose has been widely researched and incorporated as a reinforcement material in composite materials. The world has been consuming the natural resources at a much higher speed than the environment could regenerate. Today, as an uprising candidate in soft condensed matter physics, a growing interest was received owing to its unique self-assembly behaviour and quantum size effect in the formation of three-dimensional nanostructured material, could be utilised to address an increasing concern over global warming and environmental conservation. In spite of an emerging pool of knowledge on the nanocellulose downstream application, that was lacking of cross-disciplinary study of its role as a soft condensed matter for food, water and energy applications toward environmental sustainability. Here we aim to provide an insight for the latest development of cellulose nanotechnology arises from its fascinating physical and chemical characteristic for the interest of different technology holders.