Cobaloximes as Functional Models for Hydrogenases. 2. Proton Electroreduction Catalyzed by Difluoroborylbis(dimethylglyoximato)cobalt(II) Complexes in Organic Media

Cobalt complexes as artificial hydrogenases for the reductive side of water splitting

The generation of H2 from protons and electrons by complexes of cobalt has an extensive history. During the past decade, interest in this subject has increased as a result of developments in hydrogen generation that are driven electrochemically or photochemically. This article reviews the subject of hydrogen generation using Co complexes as catalysts and discusses the mechanistic implications of the systems studied for making H2. This article is part of a Special Issue entitled: Metals in Bioenergetics and Biomimetics Systems.

Charge Photo-Accumulation and Photocatalytic Hydrogen Evolution Under Visible Light at an Iridium(III)-Photosensitized Polyoxotungstate

Steady-state irradiation under visible light of a covalent Ir(III)-photosensitized polyoxotungstate is reported. In the presence of a sacrificial electron donor, the photolysis leads to the very efficient photoreduction of the polyoxometalate. Successive formation of the one-electron and two-electron reduced species, which are unambiguously identified by comparison with spectroelectrochemical measurements, is observed with a significantly faster rate reaction for the formation of the one-electron reduced species. The kinetics of the photoreduction, which are correlated to the reduction potentials of the polyoxometalate (POM), can be finely tuned by the presence of an acid. Indeed light-driven formation of the two-electron reduced POM is considerably facilitated in the presence of acetic acid. The system is also able to perform photocatalytic hydrogen production under visible light without significant loss of performance over more than 1 week of continuous photolysis and displays higher photocatalytic efficiency than the related multi-component system, outlining the decisive effect of the covalent bonding between the POM and the photosensitizer. This functional and modular system constitutes a promising step for the development of charge photoaccumulation devices and subsequent photoelectrocatalysts for artificial photosynthesis.

Cobalt corrole catalyst for efficient hydrogen evolution reaction from H2O under ambient conditions: reactivity, spectroscopy, and density functional theory calculations

The feasibility of a hydrogen-based economy relies very much on the availability of catalysts for the hydrogen evolution reaction (HER) that are not based on Pt or other noble elements. Significant breakthroughs have been achieved with certain first row transition metal complexes in terms of low overpotentials and large turnover rates, but the majority of reported work utilized purified and deoxygenated solvents (most commonly mixtures of organic solvents/acids). Realizing that the design of earth abundant metal catalysts that operate under truly ambient conditions remains an unresolved challenge, we have now developed an electronically tuned Co(III) corrole that can catalyze the HER from aqueous sulfuric acid at as low as -0.3 V vs NHE, with a turnover frequency of 600 s(-1) and ≫10(7) catalytic turnovers. Under aerobic conditions, using H2O from naturally available sources without any pretreatment, the same complex catalyzes the reduction of H(+) with a Faradaic Yield (FY) of 52%. Density functional theory (DFT) calculations indicate that the electron density on a putative hydride species is delocalized off from the H atom into the macrocycle. This makes the protonation of a [Co(III)-H](-) species the rate determining step (rds) for the HER consistent with the experimental data.

Solar fuels generation and molecular systems: is it homogeneous or heterogeneous catalysis?

Catalysis is a key enabling technology for solar fuel generation. A number of catalytic systems, either molecular/homogeneous or solid/heterogeneous, have been developed during the last few decades for both the reductive and oxidative multi-electron reactions required for fuel production from water or CO(2) as renewable raw materials. While allowing for a fine tuning of the catalytic properties through ligand design, molecular approaches are frequently criticized because of the inherent fragility of the resulting catalysts, when exposed to extreme redox potentials. In a number of cases, it has been clearly established that the true catalytic species is heterogeneous in nature, arising from the transformation of the initial molecular species, which should rather be considered as a pre-catalyst. Whether such a situation is general or not is a matter of debate in the community. In this review, covering water oxidation and reduction catalysts, involving noble and non-noble metal ions, we limit our discussion to the cases in which this issue has been directly and properly addressed as well as those requiring more confirmation. The methodologies proposed for discriminating homogeneous and heterogeneous catalysis are inspired in part by those previously discussed by Finke in the case of homogeneous hydrogenation reaction in organometallic chemistry [J. A. Widegren and R. G. Finke, J. Mol. Catal. A, 2003, 198, 317-341].

A novel ruthenium(II)-cobaloxime supramolecular complex for photocatalytic H2 evolution: synthesis, characterisation and mechanistic studies

We report the synthesis and characterization of novel mixed-metal binuclear ruthenium(II)-cobalt(II) photocatalysts for hydrogen evolution in acidic acetonitrile. First, 2-(2'-pyridyl)benzothiazole (pbt), 1, was reacted with RuCl(3)·xH(2)O to produce [Ru(pbt)(2)Cl(2)]·0.25CH(3)COCH(3), 2, which was then reacted with 1,10-phenanthroline-5,6-dione (phendione), 3, in order to produce [Ru(pbt)(2)(phendione)](PF(6))(2)·4H(2)O, 4. Compound 4 was then reacted with 4-pyridinecarboxaldehyde in order to produce [Ru(pbt)(2)(L-pyr)](PF(6))(2)·9.5H(2)O, 5 (where L-pyr = (4-pyridine)oxazolo[4,5-f]phenanthroline). Compound 5 was then reacted with [Co(dmgBF(2))(2)(H(2)O)(2)] (where dmgBF(2) = difluoroboryldimethylglyoximato) in order to produce the mixed-metal binuclear complex, [Ru(pbt)(2)(L-pyr)Co(dmgBF(2))(2)(H(2)O)](PF(6))(2)·11H(2)O·1.5CH(3)COCH(3), 6. [Ru(Me(2)bpy)(2)(L-pyr)Co(dmgBF(2))(2)(OH(2))](PF(6))(2), 7 (where Me(2)bpy = 1,10-phenanthroline, 4,4'-dimethyl-2,2'-bipyridine) and [Ru(phen)(2)(L-pyr)Co(dmgBF(2))(2)(OH(2))](PF(6))(2), 8 were also synthesised. All complexes were characterized by elemental analysis, ESI MS, HRMS, UV-visible absorption, (11)B, (19)F, and (59)Co NMR, ESR spectroscopy, and cyclic voltammetry, where appropriate. Photocatalytic studies carried out in acidified acetonitrile demonstrated constant hydrogen generation longer than a 42 hour period as detected by gas chromatography. Time resolved spectroscopic measurements were performed on compound 6, which proved an intramolecular electron transfer from an excited Ru(II) metal centre to the Co(II) metal centre via the bridging L-pyr ligand. This resulted in the formation of a cobalt(I)-containing species that is essential for the production of H(2) gas in the presence of H(+) ions. A proposed mechanism for the generation of hydrogen is presented.

Complexes of earth-abundant metals for catalytic electrochemical hydrogen generation under aqueous conditions

Growing global energy demands and climate change motivate the development of new renewable energy technologies. In this context, water splitting using sustainable energy sources has emerged as an attractive process for carbon-neutral fuel cycles. A key scientific challenge to achieving this overall goal is the invention of new catalysts for the reductive and oxidative conversions of water to hydrogen and oxygen, respectively. This review article will highlight progress in molecular electrochemical approaches for catalytic reduction of protons to hydrogen, focusing on complexes of earth-abundant metals that can function in pure aqueous or mixed aqueous-organic media. The use of water as a reaction medium has dual benefits of maintaining high substrate concentration as well as minimizing the environmental impact from organic additives and by-products.

Molecular mechanisms of cobalt-catalyzed hydrogen evolution

Several cobalt complexes catalyze the evolution of hydrogen from acidic solutions, both homogeneously and at electrodes. The detailed molecular mechanisms of these transformations remain unresolved, largely owing to the fact that key reactive intermediates have eluded detection. One method of stabilizing reactive intermediates involves minimizing the overall reaction free-energy change. Here, we report a new cobalt(I) complex that reacts with tosylic acid to evolve hydrogen with a driving force of just 30 meV/Co. Protonation of Co(I) produces a transient Co(III)-H complex that was characterized by nuclear magnetic resonance spectroscopy. The Co(III)-H intermediate decays by second-order kinetics with an inverse dependence on acid concentration. Analysis of the kinetics suggests that Co(III)-H produces hydrogen by two competing pathways: a slower homolytic route involving two Co(III)-H species and a dominant heterolytic channel in which a highly reactive Co(II)-H transient is generated by Co(I) reduction of Co(III)-H.

A Janus cobalt-based catalytic material for electro-splitting of water

The future of energy supply depends on innovative breakthroughs regarding the design of cheap, sustainable and efficient systems for the conversion and storage of renewable energy sources. The production of hydrogen through water splitting seems a promising and appealing solution. We found that a robust nanoparticulate electrocatalytic material, H(2)-CoCat, can be electrochemically prepared from cobalt salts in a phosphate buffer. This material consists of metallic cobalt coated with a cobalt-oxo/hydroxo-phosphate layer in contact with the electrolyte and mediates H(2) evolution from neutral aqueous buffer at modest overpotentials. Remarkably, it can be converted on anodic equilibration into the previously described amorphous cobalt oxide film (O(2)-CoCat or CoPi) catalysing O(2) evolution. The switch between the two catalytic forms is fully reversible and corresponds to a local interconversion between two morphologies and compositions at the surface of the electrode. After deposition, the noble-metal-free coating thus functions as a robust, bifunctional and switchable catalyst.

Organometallic Ni pincer complexes for the electrocatalytic production of hydrogen

Nonplatinum metals are needed to perform cost-effective water reduction electrocatalysis to enable technological implementation of a proposed hydrogen economy. We describe electrocatalytic proton reduction and H(2) production by two organometallic nickel complexes with tridentate pincer ligands. The kinetics of H(2) production from voltammetry is consistent with an overall third order rate law: the reaction is second order in acid and first order in catalyst. Hydrogen production with 90-95% Faradaic yields was confirmed by gas analysis, and UV-vis spectroscopy suggests that the ligand remains bound to the catalyst over the course of the reaction. A computational study provides mechanistic insights into the proposed catalytic cycle. Furthermore, two proposed intermediates in the proton reduction cycle were isolated in a representative system and show a catalytic response akin to the parent compound.

Catalytic hydrogen evolution from a covalently linked dicobaloxime

A dicobaloxime in which monomeric Co(III) units are linked by an octamethylene bis(glyoxime) catalyzes the reduction of protons from p-toluenesulfonic acid as evidenced by electrocatalytic waves at -0.4 V vs. the saturated calomel electrode (SCE) in acetonitrile solutions. Rates of hydrogen evolution were determined from catalytic current peak heights (k(app) = 1100 ± 70 M(-1) s(-1)). Electrochemical experiments reveal no significant enhancement in the rate of H(2) evolution from that of a monomeric analogue: The experimental rate law is first order in catalyst and acid consistent with previous findings for similar mononuclear cobaloximes. Our work suggests that H(2) evolution likely occurs by protonation of reductively generated Co(II)H rather than homolysis of two Co(III)H units.

Hydrogen generation catalyzed by fluorinated diglyoxime-iron complexes at low overpotentials

Fe(II) complexes containing the fluorinated ligand 1,2-bis(perfluorophenyl)ethane-1,2-dionedioxime (dAr(F)gH(2); H = dissociable proton) exhibit relatively positive Fe(II/I) reduction potentials. The air-stable difluoroborated species [(dAr(F)gBF(2))(2)Fe(py)(2)] (2) electrocatalyzes H(2) generation at -0.9 V vs SCE with i(cat)/i(p) ≈ 4, corresponding to a turnover frequency (TOF) of ∼20 s(-1) [Faradaic yield (FY) = 82 ± 13%]. The corresponding monofluoroborated, proton-bridged complex [(dAr(F)g(2)H-BF(2))Fe(py)(2)] (3) exhibits an improved TOF of ∼200 s(-1) (i(cat)/i(p) ≈ 8; FY = 68 ± 14%) at -0.8 V with an overpotential of 300 mV. Simulations of the electrocatalytic cyclic voltammograms of 2 suggest rate-limiting protonation of an Fe("0") intermediate (k(RLS) ≈ 200 M(-1) s(-1)) that undergoes hydride protonation to form H(2). Complex 3 likely reacts via protonation of an Fe(I) intermediate that subsequently forms H(2) via a bimetallic mechanism (k(RLS) ≈ 2000 M(-1) s(-1)). 3 catalyzes production at relatively positive potentials compared with other iron complexes.

The hydrogen catalyst cobaloxime: a multifrequency EPR and DFT study of cobaloxime's electronic structure

Solar fuels research aims to mimic photosynthesis and devise integrated systems that can capture, convert, and store solar energy in the form of high-energy molecular bonds. Molecular hydrogen is generally considered an ideal solar fuel because its combustion is essentially pollution-free. Cobaloximes rank among the most promising earth-abundant catalysts for the reduction of protons to molecular hydrogen. We have used multifrequency EPR spectroscopy at X-band, Q-band, and D-band combined with DFT calculations to reveal electronic structure and establish correlations among the structure, surroundings, and catalytic activity of these complexes. To assess the strength and nature of ligand cobalt interactions, the BF(2)-capped cobaloxime, Co(dmgBF(2))(2), was studied in a variety of different solvents with a range of polarities and stoichiometric amounts of potential ligands to the cobalt ion. This allows the differentiation of labile and strongly coordinating axial ligands for the Co(II) complex. Labile, or weakly coordinating, ligands such as methanol result in larger g-tensor anisotropy than strongly coordinating ligands such as pyridine. In addition, a coordination number effect is seen for the strongly coordinating ligands with both singly ligated LCo(dmgBF(2))(2) and doubly ligated L(2)Co(dmgBF(2))(2) . The presence of two strongly coordinating axial ligands leads to the smallest g-tensor anisotropy. The relevance of the strength of the axial ligand(s) to the catalytic efficiency of Co(dmgBF(2))(2) is discussed. Finally, the influence of molecular oxygen and formation of Co(III) superoxide radicals LCo(dmgBF(2))(2)O(2)(•) is studied. The experimental results are compared with a comprehensive set of DFT calculations on Co(dmgBF(2))(2) model systems with various axial ligands. Comparison with experimental values for the "key" magnetic parameters such as g-tensor and (59)Co hyperfine coupling tensor allows the determination of the conformation of the axially ligated Co(dmgBF(2))(2) complexes. The data presented here are vital for understanding the influence of solvent and ligand coordination on the catalytic efficiency of cobaloximes.