A systematic review of the success of sinus floor elevation and survival of implants inserted in combination with sinus floor elevation

Complications During Maxillary Sinus Augmentation Associated with Interfering Septa: A New Classification of Septa

Purpose:

A new classification of maxillary sinus interfering septa based on its orientation is presented along with its relationship to the prevalence and severity of sinus membrane perforations. Additionally, the impact of membrane perforation on post-operative complications and marginal bone loss during the first year of loading is evaluated.

Materials & Methods:

Retrospective chart review of 79 consecutive sinus lift procedures with lateral window technique and 107 implants. Preoperative Cone Beam Computed Tomography (CBCT) images were evaluated for the incidence and the direction of maxillary septa. Chart notes were examined for the incidence of membrane perforation and postoperative complications. Measurements of mesial and distal marginal bone levels and average bone resorption adjacent to each implant were calculated in intraoral radiographs taken at implant placement and during follow up appointments.

Results:

Interfering septa were identified in 48.1 percent of sinuses. 71.1 percent of them had the septum oriented in a buccal-lingual direction (Class I). The overall incidence of membrane perforation was 22.8 percent, and the presence of an interfering septum on CBCT scan was found to be significantly associated with the occurrence of a sinus membrane perforation (P<0.001). The mean implant marginal bone loss for sinuses, which did not experience a membrane perforation, was 0.6±0.8mm, compared with 0.9 ± 0.9 mm for the sinuses that did experience a perforation (P = 0.325).

Conclusion:

Septa should be identified, classified and managed with a meticulous attention to technical details. A classification based on the septal orientation is proposed since the orientation of the septa can complicate the surgical procedure and requires modification of the surgical technique.

Preoperative chronic sinusitis as significant cause of postoperative infection and implant loss after sinus augmentation from a lateral approach

OBJECTIVES

Among intra/postoperative complications of sinus augmentation from a lateral approach, postoperative infection and implant loss are particularly important because they have irreversible consequences. The purpose of this study was to determine the causes of postoperative infection and implant loss after a lateral approach and to determine the appropriate prophylaxis and therapy.

MATERIALS AND METHODS

In total, 109 patients (121 sinuses, 252 implants) were included in this study. The correlation between postoperative infection and implant loss and clinical variables was assessed using logistic regression analyses.

RESULTS

Postoperative infection and implant loss occurred in 8/121 sinuses (6.6%). Infection had the strongest correlation to preoperative chronic sinusitis (p = 0.007), followed by timing of implant insertion. Implant loss had the strongest correlation to preoperative chronic sinusitis (p = 0.007), followed by sex, diabetes, postoperative use of dentures, and intraoperative perforation of the sinus membrane.

CONCLUSIONS

Preoperative chronic sinusitis could be a significant cause of postoperative infection and implant loss when using sinus augmentation from a lateral approach. For appropriate prophylaxis and therapy, it is necessary to diagnose the presence of chronic sinusitis that should be treated with proper methods prior to sinus augmentation.

Prevalence and location of the posterior superior alveolar artery using cone-beam computed tomography

PURPOSE

Insufficient knowledge of the anatomy of the maxillary sinuses prior to sinus graft surgery may lead to perioperative or postoperative complications. This study sought to characterize the position of the posterior superior alveolar artery (PSAA) within the maxillary sinuses using cone-beam computed tomography (CBCT).

MATERIALS AND METHODS

A total of 300 patients with edentulous posterior maxillae, including 138 females and 162 males with an age range of 33-86 years, who presented to a radiology clinic between 2013 and 2015 were enrolled in this retrospective cross-sectional study. The distance from the inferior border of the PSAA to the alveolar crest according to the residual ridge classification by Lekholm and Zarb, the distance from the PSAA to the nasal septum and zygomatic arch, and the diameter and position of the PSAA were all assessed on patients' CBCT scans. The data were analyzed using the Mann-Whitney test and the t-test.

RESULTS

The PSAA was detected on the CBCT scans of 87% of the patients; it was located beneath the sinus membrane in 47% of cases and was intraosseous in 47% of cases. The diameter of the artery was between 1 and 2 mm in most patients (72%). The mean diameter of the artery was 1.29±0.39 mm, and the mean distances from the PSAA to the zygomatic arch, nasal septum, and alveolar crest were 22.59±4.89 mm, 26.51±3.52 mm, and 16.7±3.96 mm, respectively.

CONCLUSION

The likelihood of detecting the PSAA on CBCT scans is high; its location is intraosseous or beneath the sinus membrane in most patients. Determining the exact location of the PSAA on CBCT scans preoperatively can help prevent it from being damaged during surgery.

Influence of Lateral-Medial Sinus Width on No-Grafting Inlay Osteotome Sinus Augmentation Outcomes

PURPOSE

Intrasinus new bone formation (BF) has been observed after no-grafting osteotome sinus augmentation, and it is hypothesized to be influenced by the dimensions of the maxillary sinus. The aim of this clinical trial is to evaluate the influence of lateral-medial sinus width (SW) on no-grafting osteotome sinus augmentation outcomes using cone-beam computed tomography.

PATIENTS AND METHODS

All patients recruited for this prospective study were treated with no-grafting osteotome sinus augmentation with simultaneous implant placement. Cone-beam computed tomography was obtained before, immediately after, and 6 months after the surgical procedure to use for measurements. Descriptive statistics were calculated and univariate, bivariate, and multivariate analysis were conducted to evaluate the influence of average SW and other relevant factors on procedure outcomes, including new BF, residual bone resorption (BR), and change of peri-implant bone height (CPBH).

RESULTS

A total of 48 implants placed in 32 elevated sinuses of 29 patients were included. The average SW was 11.3 ± 1.8 mm. Intrasinus BF measured 1.7 ± 0.9 mm at 6 months after surgery. The amount of BR was 0.3 ± 0.9 mm, and CPBH was calculated as 1.3 ± 1.3 mm. Multivariate analysis showed a negative correlation between SW and BF (r = -0.469, P = .001), as well as between SW and CPBH (r = -0.562, P = .001). A positive correlation was discovered between SW and BR (r = 0.311, P = .027) in general.

CONCLUSIONS

The lateral-medial SW was observed to have a negative correlation with new BF and CPBH after no-grafting osteotome sinus augmentation.

Treatment concepts for the posterior maxilla and mandible: short implants versus long implants in augmented bone

The aim of this narrative review is to describe treatment options for the posterior regions of the mandible and the maxilla, comparing short implants vs. longer implants in an augmented bone. The dental literature was screened for treatment options enabling the placement of dental implants in posterior sites with a reduced vertical bone height in the maxilla and the mandible. Short dental implants have been increasingly used recently, providing a number of advantages including reduced patient morbidity, shorter treatment time, and lower costs. In the posterior maxilla, sinus elevation procedures were for long considered to be the gold standard using various bone substitute materials and rendering high implant survival rates. More recently, implants were even placed without any further use of bone substitute materials, but the long-term outcomes have yet to be documented. Vertical bone augmentation procedures in the mandible require a relatively high level of surgical skill and allow the placement of standard-length dental implants by the use of autogenous bone blocks. Both treatment options, short dental implants, and standard-length implants in combination with vertical bone augmentation procedures, appear to result in predictable outcomes in terms of implant survival rates. According to recent clinical studies comparing the therapeutic options of short implants vs. long implants in augmented bone, the use of short dental implants leads to a number of advantages for the patients and the clinician.

Association Between Sinus Membrane Thickness and Membrane Perforation in Lateral Window Sinus Augmentation: A Retrospective Study

BACKGROUND

Association between Schneiderian membrane thickness and membrane perforation is examined in lateral window sinus augmentation.

METHODS

This retrospective study reviewed records of 551 patients who underwent lateral sinus augmentation at Tufts University School of Dental Medicine, Boston, Massachusetts, from June 1, 2006 to May 31, 2015. Preoperative cone-beam computed tomography images were analyzed to evaluate possible association among membrane thickness, residual bone height, and membrane perforation. Data were evaluated using Mann-Whitney U test at P <0.05.

RESULTS

Total 167 patients (95 males and 72 females) met the eligibility criteria and were included in the study. Among them, 47 patients had Schneiderian membrane perforation (perforation group). Mean membrane thickness was 0.84 ± 0.67 mm in the perforation group and 2.65 ± 4.02 mm in the non-perforation group. There was a statistically significant difference in membrane thickness between groups (P <0.001). Mean residual ridge thickness was 2.78 ± 1.37 mm in the perforation group and 4.21 ± 2.09 mm in the non-perforation group. There was a statistically significant difference in residual alveolar bone height (P <0.001).

CONCLUSIONS

Patients who experienced membrane perforation had a thinner membrane compared with patients without membrane perforation. Schneiderian membrane perforation was associated with decreased residual bone height.

Maxillary sinus floor elevation with simultaneous implant placement without grafting materials: a systematic review and meta-analysis

The present study aimed to conduct a systematic review and meta-analysis on the effectiveness of maxillary sinus floor elevation and immediate implant installation without the use of grafting material. An electronic search without date or language restriction ​​was performed in PubMed/MEDLINE, Cochrane Central Register of Controlled Trials, Web of Science, Embase, and the grey literature, to May 2016. Eligibility criteria encompassed prospective and retrospective cohort studies, controlled clinical trials, and randomized clinical trials. The search and selection process yielded 18 studies, published between 2005 and 2016. A meta-analysis was conducted only for experimental studies comparing sinus floor elevation with and without grafting material; results were expressed as the standardized mean difference (SMD) or risk ratio (RR) with the 95% confidence interval (CI). An average gain in bone height of 4.7mm over an average 39.4 month period was observed in the sinus elevated without grafting material. Regarding implants, there was a cumulative average survival rate of 97%. On meta-analysis, bone gain (P=0.98) and implant survival (P=0.13) did not differ significantly between sinuses lifted with or without grafting material, with a SMD of 0.01 (95% CI -0.42 to 0.44) and with a RR of 0.55 (95% CI 0.26 to 1.19), respectively.

Effect of sex-hormone levels, sex, body mass index and other host factors on human craniofacial bone regeneration with bioactive tricalcium phosphate grafts

Little is known regarding the associations between sex-hormone levels, sex, body mass index (BMI), age, other host factors and biomaterial stimulated bone regeneration in the human craniofacial skeleton. The aim of this study was to elucidate the associations between these factors and bone formation after sinus floor augmentation procedures (SFA) utilizing a bioactive tricalcium phosphate (TCP) bone grafting material. We conducted a prospective study in a human population in which 60 male and 60 female participants underwent SFA and dental implant placement using a staged approach. BMI as well as levels of serum estradiol (E2), total testosterone (TT), and the free androgen index (FAI) were measured by radioimmunoassay and electrochemoluminescent-immunoassay. At implant placement, 6 months after SFA, bone biopsy specimens were harvested for hard tissue histology, the amount of bone formation was evaluated by histomorphometry and immunohistochemical analysis of osteogenic marker expression. The Wilcoxon rank-sum U test, Spearman correlations and linear regression analysis were used to explore the association between bone formation and BMI, hormonal and other host factors. BMI and log E2 were significantly positively associated with bone formation in male individuals (p < 0.05). Histomorphometry revealed trends toward greater bone formation and osteogenic marker expression with non-smokers compared to smokers. In male patients, higher E2 levels and higher BMI enhanced TCP stimulated craniofacial i.e. intramembranous bone repair.

Effect of Ratio of Residual Alveolar Bone to Graft Material in Contact With Fixture Surface on Marginal Bone Loss of Implants in Augmented Maxillary Sinuses: A 1-Year Retrospective Study

PURPOSE

The purpose of this retrospective study was to evaluate the influences of height or area ratio of residual alveolar bone to graft material on marginal bone loss around implants in the augmented maxillary sinuses with delayed implant placement.

MATERIALS AND METHODS

In this study, 42 patients with Astra implants in sinuses that had been augmented with alloplasts and allografts or xenografts (alveolar bone height ≤ 5 mm) were selected. Marginal bone level surrounding 1 implant per sinus was assessed by radiographic imaging at the time of final restoration delivery and 12 months after functional loading. To evaluate the marginal bone level alterations using clinical and radiographic data, Pearson's correlation analysis and Mann-Whitney test were performed.

RESULTS

Forty-six implants were included in this study. The residual bone/implant length ratio and the residual bone/implant area ratio were not associated with marginal bone loss at 1 year after functional loading (P > 0.05). And, marginal bone loss did not differ significantly between 2 types of graft materials during the observation period (P > 0.05).

CONCLUSION

The residual bone/implant length ratio and residual bone/implant area ratio were not associated with marginal bone loss around implants placed in augmented sinuses during 1 year of functional loading.

Prevalence, Location, and Size of Maxillary Sinus Septa: Computed Tomography Scan Analysis

INTRODUCTION

The present study was undertaken to evaluate the anatomy of the maxillary sinus in relation to its position and the height of its septa, using cone beam computed tomography (CBCT).

MATERIALS AND METHODS

In this descriptive retrospective study, 300 CBCT images of maxillary sinuses of patients with posterior maxillary edentulism were evaluated. The maxillary sinus septa were evaluated in relation to their prevalence, height, and position; t-test and Mann-Whitney tests were used for the analysis of data.

RESULTS

Sinus septa were detected in 44% of the subjects, with equal frequencies in the anterior, middle, and posterior positions. The mean height of the septa was 3.6 ± 1.56 mm.

CONCLUSION

In a population of Iranian subjects, in half of the cases, the sinus septa might be present in the anterior, middle, and posterior positions.

CLINICAL SIGNIFICANCE

In order to avoid intraoperative problems during sinus lift procedures, it is necessary to accurately evaluate the sinus, preferably with the use of CBCT Keywords: Cone beam computed tomography, Dental implant, Maxillary sinus septa.

Could Calcified Triglyceride Bone Cement Be an Alternative Graft Material in Maxillary Sinus Augmentation?

The ideal graft material for maxillary sinus augmentation is still a matter of controversy and the search for a more appropriate bone substitute for use continues. The aim of this study was to evaluate bone formation as a sign of the regeneration following maxillary sinus augmentation in rabbits using 3 different biomaterials, one of which is a newly developed graft material; calcified triglyceride bone cement (CTBC).Twenty-one New Zealand rabbits were used and randomly divided into 3 groups. Bilateral maxillary sinus augmentation was carried out and autogenous bone (AB), bovine hydroxyapatite (BHA), and CTBC were administered. Maxillary sinuses were dissected after fourth and eighth weeks of the operation. The bone formation was evaluated by stereological and histopathological analysis and the data were analyzed statistically.When the volume of primary bone is compared, statistically significant differences were found among all groups at both of the fourth and eighth weeks. The highest value was obtained from AB applied group. In BHA and CTBC applied groups, active bone formation, osseointegration of graft materials were observed at both fourth and eighth weeks. In CTBC applied group, primary bone formation was only seen as linked to the continuation of parent sinus bony wall.The efficiency of primary bone formation of CTBC was found less than AB and BHA. Of the 3 graft materials tested, BHA is the strongest alternative to AB graft for maxillary sinus augmentation.

Influence of Healing Period Upon Bone Turn Over on Maxillary Sinus Floor Augmentation Grafted Solely with Deproteinized Bovine Bone Mineral: A Prospective Human Histological and Clinical Trial

PURPOSE

To investigate the influence of maturation timing upon histological, histomorphometric and clinical outcomes when deproteinized bovine bone mineral (DBBM) was used as a sole biomaterial for staged maxillary sinus floor augmentation (MSFA).

MATERIALS AND METHODS

Patients with a posterior edentulous maxillary situation and a vertical bone height ≤ 4 mm were included in this study. A staged MSFA was carried out. After MSFA with DBBM as a sole grafting material, biopsy cores were harvested with simultaneous implant placement followed by a healing period of 5, 8, and 11 months, respectively. Micro-CT, histologic and histomorphometric analyses were performed.

RESULTS

Forty-one patients were enrolled and 38 bone core biopsies were harvested. Significantly greater BV/TV was observed between 5- and 8-month healing from micro-CT analysis. Histomorphometric analyses showed the ratio of mineralized newly formed bone increased slightly from 5 to 11 months; however, no statistically significant difference was reached (p = .409). Residual bone substitute decreased from 37.3 ± 5.04% to 20.6 ± 7.45%, achieving a statistical significant difference from of 5 up to 11 months (p < .01). Moreover, no implant failure, biological or technical complication occurred after 12-month follow-up of functional loading.

CONCLUSION

DBBM utilized as sole grafting material in staged MSFA demonstrated to be clinically effective regardless of the healing period. Histomorphometrical and micro-CT assessments revealed that at later stages of healing (8 and 11 months) there is a higher proportion of newly-bone formation compared to earlier stages (5 months). Moreover, the longer the maturation period, the substantially lesser remaining biomaterial could be expected. Even though, these facts did not seem to negatively impact on the implant prognosis 1-year after loading.

Evaluation of Volumetric Changes of Augmented Maxillary Sinus With Different Bone Grafting Biomaterials

Extensive alveolar bone resorption because of pneumatized maxillary sinus is a common problem that limits dental implant placement. Maxillary sinus floor augmentation (MSFA) is an accepted treatment protocol that provides sufficient bone volume. The aim of this study was to evaluate the percentage of graft volume reduction following MSFA using cone beam computed tomography. In this retrospective study, cone beam computed tomography scans of MSFA were measured to evaluate the volume of the grafted sinus with deproteinized bovine bone (DBB), mineralized allograft (MA), or a mixture of MA and demineralized allograft as a composite. The volumetric changes in sinus augmentation between 2 weeks (T-I) and 6 months (T-II) after operation were analyzed. Thirty-nine patients were included in this study. The average percent volume reduction was 8.14 ± 3.76%, 19.38 ± 9.22%, and 24.66 ± 4.68% for DBB, MA, and composite graft, respectively. A significant graft volume reduction was found between T-I and T-II for all groups (P < 0.01). The DBB group showed the least volume reduction (P < 0.01). Biomaterials can influence the bone graft volume change before implant placement. Deproteinized bovine bone may offer greater volume stability during healing than mineralized and composite allografts.

Occlusal rehabilitation in patients with congenitally missing teeth-dental implants, conventional prosthetics, tooth autotransplants, and preservation of deciduous teeth-a systematic review

Background

Implant patients with congenitally missing teeth share some common charateristics and deserve special attention.

Methods

The PICO question was “In patients with congenitally missing teeth, does an early occlusal rehabilitation with dental implants in comparison to tooth autotransplants, conventional prosthetics on teeth or preservation of deciduous teeth have better general outcomes in terms of survival, success and better patient centered outcomes in terms of quality of life, self-esteem, satisfaction, chewing function?”

After electronic database search, a total of 63 relevant studies were eligible, of which 42 qualified for numerical data synthesis, 26 being retrospective studies. A data synthesis was performed by weighted means for survival/success/annual failure rates.

Results

The mean survival of implants was 95.3 % (prosthesis survival 97.8 %), autotransplants 94.4 %, deciduous teeth 89.6 %, and conventional prostheses 60.2 %. The implant survival in children, adolescents, and adults was 72.4, 93.0, and 97.4 %. Annual failure rates of implants 3.317 %, autotransplants 1.061 %, deciduous teeth 0.908 %, and conventional prostheses 5.144 % indicated better results for natural teeth and more maintenance needs for the both prosthetic treatments. The mean OHIP score was 27.8 at baseline and a mean improvement of 14.9 score points was reported after implant prosthetics. The mean satisfaction rates were 93.4 (implants), 76.6 (conventional prostheses), 72.0 (autotransplants), and 65.5 % (orthodontic space closure).

Conclusions

In synopsis of general and patient-centered outcomes, implants yielded the best results, however, not in children <13 years. Autotransplants and deciduous teeth had low annual failure rates and are appropriate treatments in children and adolescents at low costs. Conventional prosthetics had lower survival/success rates than the other options. Due to heterogeneity and low number of studies, patient-reported outcomes in this review have to be interpreted with caution.

Continuous intra-sinus bone regeneration after nongrafted sinus lift with a PLLA mesh plate device and dental implant placement in an atrophic posterior maxilla: a case report

Background

Sinus lift is a bone augmentation procedure that improves the alveolar crest height in an atrophic posterior maxilla. However, the regenerated bone volume can vary and generally has a tendency to decrease after sinus operation. This article describes nongrafted maxillary sinus lift using a bioresorbable unsintered hydroxyapatite combined with poly l-lactide (HA/PLLA) mesh plate device and dental implant placement in an atrophic posterior maxilla, after which continuous bone gain was observed around the implant apex during a postoperative follow-up period of 3 years.

Case presentation

A 60-year-old healthy female was referred to our department for dental implant therapy in the right posterior maxilla. Clinical examination revealed that the maxilla was edentulous from the right first premolar to the second molar region. Radiographically, atrophy of the maxillary alveolar ridge in the same tooth site was observed. Sinus membrane elevation and simultaneous implant placement were performed through the lateral approach. HA/PLLA mesh was utilized to maintain space under the elevated sinus membrane and as a fixation device to replace the bone window. Six months later, new bone was generated in the secluded space maintained under the elevated sinus membrane. When observed 42 months after the implant insertion, bone volume around the implant apex had increased in vertical direction under the HA/PLLA mesh plate device, and there was continuous bone formation in the sinus over time.

Conclusion

This nongrafted sinus lift procedure using an HA/PLLA mesh device attained predictable bone formation. Stable membrane elevation by an HA/PLLA device might induce long-term, continuous bone formation in the sinus.

Monophasic ß-TCP vs. biphasic HA/ß-TCP in two-stage sinus floor augmentation procedures - a prospective randomized clinical trial

OBJECTIVES

To compare a monophasic (100% ß-TCP) and a biphasic (60% HA and 40% ß-TCP) bone substitute material (BSM) regarding biocompatibility, osteoconductivity and implant stability using histological, radiological and resonance frequency analysis.

MATERIAL AND METHODS

Sixty-seven sinus floor elevations were performed in 60 patients. One patient group (monophasic bone substitute [MBS], 30 patients, 32 sinuses) was augmented by the use of the monophasic material (Bioresorb^® , Sybron Implant Solutions, Bremen, Germany), while the second group (biphasic bone substitute (BBS), 30 patients, 35 sinuses) received a biphasic material (Maxresorb^® , Botiss Biomaterials, Berlin, Germany). Cone beam CT images were taken immediately after augmentation and prior to implant placement after 6 months. Trephines were harvested, while the implant bed was prepared. Resonance frequency analysis was performed immediately after implant placement and 6 months later. Descriptive analysis was performed on all augmented sinus (n = 67). For statistical comparison of the groups, one sinus of each bilaterally treated patient was randomly excluded, resulting in 30 sinuses grafted with MBS and 30 sinuses grafted with BBS (n = 60).

RESULTS

Histomorphometrical analysis of all sinuses displayed comparable results for both groups regarding new bone matrix (MBS 36.16 ± 19.37%, BBS 38.42 ± 12.61%), residual BSM (MBS 30.26 ± 11.7%, BBS 32.66 ± 12.57%) and non-mineralized tissue (MBS 34.29 ± 18.32%, BBS 28.92 ± 15.04) %) (P > 0.05, respectively). Radiological volume of BBS was significantly more stable (volume loss of 22.2% for MBS, 6.66% for BBS; P < 0.001), and homogeneity of the graft after 6 months was higher for BBS than that for MBS (P < 0.05). Resonance frequency analysis endorsed a higher implant stability quotient for BBS after 6 months than that for MBS (MBS 78.31 ± 5.81, BBS 80.42 ± 6.31; P < 0.05, Mann-Whitney U-test, respectively).

CONCLUSION

Both monophasic and biphasic materials show good biocompatibility and osteoconductivity with satisfactory support on implant stability. BBS remains more stable in terms of volume maintenance and radiological graft homogeneity after a healing period of 6 months.

Influence of Sinus Floor Configuration on Grafted Bone Remodeling After Osteotome Sinus Floor Elevation

BACKGROUND

This study investigates influence of the sinus floor configuration on dimensional stability of grafted bone height after the osteotome sinus grafting procedure.

METHODS

Forty single-tooth dental implants inserted after placement of bioglass and/or allograft into the sinus area using an osteotome technique in 37 patients were evaluated in this retrospective study. Periapical radiographs were taken using the long-cone technique before and after implant placement. Specifically, radiographic measurements of grafted bone height at the mesial and distal side of each implant were taken, and the sinus floor configuration was classified into concave, angle, and flat according to the sinus floor profile at the implant site. Furthermore, the intruding angle, defined as the angle between the implant axis and sinus floor, was measured.

RESULTS

All implants were clinically stable during a mean follow-up period of 39.2 months. Mean initial gain of sinus grafted bone height was 7.0 ± 1.9 mm, and later it was reduced to 4.6 ± 1.9 mm at follow-up (P <0.001). A greater reduction in grafted bone height was revealed in the flat sinus group compared with the concave group (P <0.001). Results from the linear regression showed larger intruding angles were statistically significantly associated with a greater reduction in grafted bone height (r² = 0.55, P <0.001).

CONCLUSION

All bioglass and/or allograft placed in the maxillary sinus after the osteotome technique underwent remodeling and shrinkage; however, the outcome of the procedure was more predictable in sinuses with a concave floor and small implant-intruding angles.

Three-dimensional cone beam computed tomography analysis of maxillary sinus and alveolar bone anatomy in the restorative axis of dental implants using radiopaque drill guides

The objectives were to assess the sinus anatomy and alveolar ridge dimensions and to identify clinical factors and morphological relationships that may predict the characteristics of the sinus anatomy. A total 336 edentulous molar and 168 edentulous premolar regions were analyzed. The mediolateral maxillary sinus (5mm and 10mm above alveolar bone), lateral maxillary sinus wall, ostium height, and alveolar ridges were measured. Measurement regions were defined by radiopaque simulation of the restoration goal. Mean molar mediolateral dimensions were >10mm: first molar, 11.8mm (range 3.8-21.1mm); second molar, 12.2mm (range 7.9-20.1mm). The extent of the sinus differed significantly between premolars and molars (P<0.001). The first molar region had the highest mean value for the lateral sinus wall (2.4mm, range 0.2-7.9mm) and the greatest distance between the alveolar crest and simulated restorative goal (8.1mm, range 1.1-16.3mm). Septum prevalence was 46% in the molar region and 27% in the premolar region. A lower alveolar ridge height was associated with a wider transverse extent of maxillary sinus and consequently longer distances between the crest and restorative goal. Systematic three-dimensional analysis of the maxillary sinus yields precise preoperative information about sinus configurations. There were significant variations and relationships among characteristics of the maxillary sinus, ridge, and the restorative goal.

Sinus floor elevation utilizing the transalveolar approach

A transalveolar approach for sinus floor elevation with subsequent placement of dental implants was first suggested by Tatum in 1986. In 1994, Summers described a different transalveolar approach using a set of tapered osteotomes with increasing diameters. The transalveolar approach of sinus floor elevation, also referred to as 'osteotome sinus floor elevation', the 'Summers technique' or the 'Crestal approach', may be considered as being more conservative and less invasive than the conventional lateral window approach. This is reflected by the fact that more than nine out of 10 patients who experienced the surgical procedure would be willing to undergo it again. The main indication for transalveolar sinus floor elevation is reduced residual bone height, which does not allow standard implant placement. Contraindications for transalveolar sinus floor elevation may be intra-oral, local or medical. The surgical approach utilized over the last two decades is the technique described by Summers, with or without minor modifications. The surgical care after implant placement using the osteotome technique is similar to the surgical care after standard implant placement. The patients are usually advised to take antibiotic prophylaxis and to utilize antiseptic rinses. The main complications reported after performing a transalveolar sinus floor elevation were perforation of the Schneiderian membrane in 3.8% of patients and postoperative infections in 0.8% of patients. Other complications reported were postoperative hemorrhage, nasal bleeding, blocked nose, hematomas and benign paroxysmal positional vertigo. Whether it is necessary to use grafting material to maintain space for new bone formation after elevating the sinus membrane utilizing the osteotome technique is still controversial. Positive outcomes have been reported with and without using grafting material. A prospective study, evaluating both approaches, concluded that significantly more bone gain was seen when grafting material was used (4.1 mm mean bone gain compared with 1.7 mm when no grafting material was utilized). In a systematic review, including 19 studies reporting on 4388 implants inserted using the transalveolar sinus floor elevation technique, the 3-year implant survival rate was 92.8% (95% confidence interval: 87.4-96.0%). Furthermore, a subject-based analysis of the same material revealed an annual failure rate of 3.7%. Hence, one in 10 subjects experienced implant loss over 3 years. Several of the included studies demonstrated that transalveolar sinus floor elevation was most predictable when the residual alveolar bone height was ≥ 5 mm and the sinus floor anatomy was relatively flat.

Schneider membrane thickness classification evaluated by cone-beam computed tomography and its importance in the predictability of perforation. Retrospective analysis of 200 patients

Perforation of the Schneiderian membrane is a common complication of sinus augmentation. The aim of this retrospective study was to assess the associations between the lateral wall technique and the ridge approach and the risk of perforation, together with the relations between the thickness of the membrane and the risk of perforation. We studied 200 patients (103 men and 97 women) who had cone-beam computed tomography (CT) before a sinus lift with either a lateral wall technique (n=100) or the rigid approach (n=100) for insertion of prosthetic implants. Two-hundred cone-beam CT images were studied, and the mucosal thickness was evaluated. Perforations of the membrane were recorded during operation. The thickness of the Schneiderian membrane on cone-beam CT images was classified as Type I (not recordable), Type II (0-2mm), Type III (3-4mm), or Type IV(>4mm). Type I was recorded in 52 (26%), Type II in 35 (18%), type III in 67 (34%), and type IV in 46 (23%). There were 16 perforations: 12 Type I and four Type II, seven of 100 with the lateral wall technique, and nine of 100 who had the rigid approach. Based on these results we suggest that a membrane 0-2mm thick may be an important determinant of perforation, regardless of the procedure used.

Schneiderian Membrane Thickness and Clinical Implications for Sinus Augmentation: A Systematic Review and Meta-Regression Analyses

BACKGROUND

Schneiderian membrane thickness (SMT) has been regarded as a key factor for influencing membrane perforation, which may jeopardize the final clinical outcome of sinus augmentation. Hence, this systematic review aims at studying the mean SMT and further investigating patient-related factors that may affect SMT. As a secondary goal, the association between SMT and membrane perforation rate was studied.

METHODS

Three independent reviewers in several databases, including MEDLINE, EMBASE, Cochrane Central Register of Controlled Trials, and Cochrane Oral Health Group Trials Register databases, conducted electronic and manual literature searches. This review was written and conducted according to the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) and MECIR (Methodological Expectations of Cochrane Intervention Reviews) guidelines. Quantitative assessment was performed for articles that met the inclusion criteria to investigate the mean SMT, its contributing factors, and the influence on membrane damage and surgical complications.

RESULTS

Thirty-one studies that reported maxillary SMT were considered for qualitative analysis. Nineteen were further meta-analyzed. Overall mean ± SE SMT was 1.17 ± 0.1 mm (95% confidence interval [CI] = 0.89 to 1.44). Although mean SMT for the three-dimensional radiography (3DR) group was 1.33 mm (95% CI = 1.06 to 1.60), for the histology group, it was 0.48 mm (95% CI = 0.12 to 1.1). Random-effects model showed that, although there is a trend for thicker SMT as determined using 3DR compared with histologic analysis, such difference did not reach statistical significance (P = 0.15). Also, regression analyses demonstrated that the variables periodontitis (P = 0.13) and smoking (P = 0.11) showed thicker SMT. Inconclusive data were obtained when correlating SMT and perforation rate, although it seems that thicker SMT might be more prone to perforation (P = 0.14).

CONCLUSIONS

SMT is, on average, 1 mm in patients seeking sinus augmentation. Three-dimensional technologies overestimate approximately 2.5 times SMT when compared with histologic analysis. Periodontitis and smoking may result in thickening of the sinus membrane. However, current data were inconclusive to link SMT to the rate of membrane damage.

Sinus lift: 3 years follow up comparing autogenous bone block versus autogenous particulated grafts

Background/purpose

The aim of this prospective randomized controlled clinical trial was to compare vertical bone gain and bone resorption after sinus graft procedures performed either with particulate or with autogenous bone block.

Material and methods

Forty-one patients underwent sinus graft procedures with autogenous bone. They were randomly assigned to one group. The first group of 22 patients was treated with autogenous bone block with or without particulated bone, while in the second group of 19 patients sinus floor elevation was performed only with particulated autogenous bone. Linear measurements were recorded before surgery with a computed tomography scan at surgery and at 36 months after sinus lift grafting with a second computed tomography scan. To detect statistical differences Student t test was applied. Differences were considered significant if P values were < 0.05.

Results

There was a statistically significant difference in bone gain for the group treated with bone block grafts.

Conclusion

As a general clinical guideline the clinician should prefer, wherever feasible, en-block bone grafts for sinus floor augmentation procedures.

Short (6-mm) dental implants versus sinus floor elevation and placement of longer (≥10-mm) dental implants: a randomized controlled trial with a 3-year follow-up

OBJECTIVES

To investigate whether short (6-mm) dental implants could be an alternative to sinus floor elevation (SFE) and placement of longer (≥10-mm) implants in the posterior maxilla.

MATERIALS AND METHODS

Over a 3-year period, all patients presenting with partial edentulism in the posterior maxilla were considered for inclusion in this randomized controlled trial. Patients were randomly chosen either to receive short (6-mm) implants (test group [TG]) or to undergo SFE with simultaneous placement of standard-length (≥10-mm) implants (control group [CG]). SFE was performed using the lateral technique. In both groups, tapered implants (AnyRidge, MegaGen, Gyeongbuk, South Korea) were placed. All implants were loaded after 4 months of healing. At each annual follow-up session, clinical and radiographic parameters were assessed. Primary outcomes were implant survival, stability (measured with the implant stability quotient [ISQ]), marginal bone loss (MBL), and complications; secondary outcomes were patient satisfaction and treatment time and cost.

RESULTS

Thirty-three patients were assigned to the TG and 20 to the CG. Forty-five implants were inserted in each group. At 3 years, implant survival rates were 100% and 95.0% for the TG and CG, respectively; this difference was not statistically significant (P = 0.38). The mean ISQ values of the TG and CG did not differ at placement (68.2 vs. 67.8, P = 0.1), at delivery of the final restoration (69.5 vs. 69.4, P = 0.9), and after 1 year (71.0 vs. 71.5, P = 0.1); at 3 years, the CG had a significantly higher mean ISQ than the TG (72.4 vs. 71.6, P = 0.004). Mean MBL was significantly higher in the CG than in the TG, both at 1 year (0.14 mm vs. 0.21 mm, P = 0.006) and at 3 years (0.20 mm vs. 0.27 mm, P = 0.01). A few complications were reported. Surgical time and cost were significantly higher in the CG than in the TG (P < 0.0001). Patient satisfaction was high in both groups.

CONCLUSIONS

In this randomized controlled trial, results for short (6-mm) implants were similar to those for longer (≥10-mm) implants in augmented bone. Short implants might be preferable to SFE, because the treatment is faster and less expensive. Long-term randomized controlled trials are required to confirm these results.

Lateral approach for sinus floor elevation: large versus small bone window - a split-mouth randomized clinical trial

OBJECTIVES

To test whether a reduction of bone window dimension, in a split-mouth randomized study design, focused on lateral sinus floor elevations, can achieve better results than a wider window in terms of augmented bone height and a reduction of patient discomfort and surgical complications.

MATERIALS AND METHODS

Of the sixteen subjects enrolled in the study, each underwent a bilateral sinus lift procedure based on two different access flaps to maxillary sinus. Test side: small access window (6 × 6 mm) + bone filling using a special device. Control side: large access window (10 × 8 mm) + manual bone filling. Alveolar bone height and width were measured at pre-op and 6-month post-op CT scans; repeatable measurements were obtained using radiographic stents. Surgical intervention duration was also recorded. Patients' evaluation of surgical discomfort was assessed using a VAS diagram at 7-day, 14-day and 30-day follow-up.

RESULTS

A significant bone augmentation in height and width of alveolar crest was obtained in both test (8.71 ± 1.11 mm, 4.70 ± 0.58 mm) and control (8.5 ± 2.02 mm, 4.68 ± 0.70 mm) sides, although no significant differences were found between the two groups. Neither any significant differences emerge in data concerning the duration of the intervention (Test 42.62 ± 6.67 min, Control 41.68 ± 8.34 min). Patients' opinion relating to surgical discomfort showed a preference for test procedure at 7-day, 14-day and 30-day follow-up.

CONCLUSIONS

A reduction of window dimensions did not affect the safety of the surgical procedure. The two testing techniques showed no statistically significant differences in surgical intervention duration. Patients' opinion at 7-day and 14-day post-op showed a preference for test procedure.

Prevalence of bony septa, antral pathology, and dimensions of the maxillary sinus from a sinus augmentation perspective: A retrospective cone-beam computed tomography study

PURPOSE

Sinus elevation procedures have become a routine and reliable way to gain bone volume in the edentulous maxilla for dental implant placement. Presence of bony septations and pathology in the maxillary sinus often cause complications leading to graft or implant failure or both. The aim of this study was to retrospectively evaluate the prevalence of pathology, direction of the septa, and sinus width measured at 2 mm, 5 mm, and 10 mm from the sinus floor in maxillary sinuses using cone-beam computed tomography (CBCT).

MATERIALS AND METHODS

Seventy-two sinuses from 36 random preoperative CBCT scans referred for implant therapy were retrospectively evaluated for the number, prevalence, and direction of bony septations and presence of pathology. Width of the sinus was also measured at 2 mm, 5 mm, and 10 mm from the sinus floor to account for the amount of bone available for implant placement.

RESULTS

Maxillary sinus septa were found in 59.7%. Presence of a single septum was noted in 20 sinuses (27.7%), followed by two septa in 17 sinuses. The most common direction of the septum was the transverse direction. Retention pseudocyst and mucosal thickening were the most commonly seen abnormality/pathology.

CONCLUSION

Based on the high prevalence of septa and sinus pathology in this sample, a preoperative CBCT scan might be helpful in minimizing complications during sinus augmentation procedures for dental implant therapy.

Mini-lateral windows for minimally invasive maxillary sinus augmentation: case series of a new technique

OBJECTIVES

The purpose of this article was to introduce a new technique for minimally invasive lateral window sinus augmentation, developed to maximize the amount of residual lateral wall after the procedure.

MATERIALS AND METHODS

Fourteen consecutive patients requiring maxillary sinus augmentation by a lateral approach and delayed implant placement were treated using standardized mini-lateral windows. Before the procedure, the remaining height of alveolar bone was determined; 6 months after the procedure, the augmented height and augmented width were measured. The extent of the antrostomy was calculated using a gauge and compared with a conventional window size.

RESULTS

A total of 15 maxillary sinus augmentation procedures were performed in 14 patients using this technique. Every patient received the planned implant treatment 6 months after the sinus augmentation procedure. The average residual bone height was 2.1 ± 1.1 mm, the average augmented height was 13.4 ± 3.4 mm, and the average augmented width was 19.0 ± 5.5 mm. The average total area of the antrostomy was calculated to be 59.2 ± 12.8 mm.

CONCLUSIONS

The results of this case series study suggest that this technique allows for the achievement of a similar result as with conventional size windows, but with a significantly smaller total window area.

Two-stage crestal sinus elevation by sequential drills in less than 4 mm of residual ridge height: a clinical and histologic case report

PURPOSE

The aim of this work, the first human histologic case report of this technique, was a clinical and histologic evaluation of implant placed in a severely atrophic maxilla using a 2-stage crestal sinus elevation.

CASE PRESENTATION

A 52-year-old woman required rehabilitation of an atrophic maxilla with a fixed implant-supported prosthesis. At the first surgery, a crestal sinus lift was performed using beta-tricalcium phosphate (β-TCP), as radiographic tracer, and mineralized human bone allograft (MHBA) as grafting material. After 6 months, a bone core biopsy was taken, and 2 implants were placed in the augmented sites. Four months later, implants were exposed, and 2 splinted gold-porcelain crowns were delivered. Histology highlighted basal bone disappearance, replaced by a wide composite network (∼50% vol/vol) of MHBA granules connected by newly formed bone, and osteoblastic activities.

CONCLUSION

This case report demonstrates the possibility of executing a staged transcrestal sinus lift in atrophic situations. MHBA evidenced usefulness in maintaining bone volume. Histologic analyses confirmed the sound outcome of the graft augmentation. Additional studies would be beneficial to confirm or refute the reliability of this technique.

Long-term Evaluation of Peri-implant Bone Level after Reconstruction of Severely Atrophic Edentulous Maxilla via Vertical and Horizontal Guided Bone Regeneration in Combination with Sinus Augmentation: A Case Series with 1 to 15 Years of Loading

BACKGROUND

To the best of the authors' knowledge, there is very limited clinical data on the outcomes of simultaneous guided bone regeneration (GBR) for horizontal and/or vertical bone gain for the reconstruction of severely atrophic edentulous maxilla. Therefore, the purpose of the clinical series presented herein was to clinically evaluate long-term horizontal and vertical bone gain, as well as implant survival rate after reconstruction of severely atrophic edentulous maxillary ridges.

MATERIAL AND METHODS

Sixteen patients (mean age: 64.6 ± 14.6 years of age) were consecutively treated for vertical and/or horizontal bone augmentation via GBR in combination with bilateral sinus augmentation utilizing a mixture of autologous and anorganic bovine bone. Implant survival, bone gain, intraoperative/postoperative complications and peri-implant bone loss were calculated up to the last follow-up exam.

RESULTS

Overall, 122 dental implants were placed into augmented sites and have been followed from 12 to 180 months (mean: 76.5 months). Implant survival was 100% (satisfactory survival rate of 97.5%). Mean bone gain was 5.6 mm (max: 9 mm; min: 3 mm) While vertical bone gain was 5.1 ± 1.8 mm; horizontal bone gain was 7.0 ± 1.5 mm. No intraoperative/postoperative complications were noted. Mean peri-implant bone loss values were consistent within the standards for implant success (1.4 ± 1.0 mm). At patient-level, only one patient who had three implants presented with severe peri-implant bone loss.

CONCLUSION

Complete reconstruction of an atrophied maxilla can be successfully achieved by means of guided bone regeneration for horizontal and/or vertical bone gain including bilateral sinus augmentation using a mixture of anorganic bovine bone and autologous bone.

Radiographic Evaluation of Maxillary Sinus Lateral Wall and Posterior Superior Alveolar Artery Anatomy: A Cone-Beam Computed Tomographic Study

OBJECTIVE

The purpose of the current study is to assess the thickness of the maxillary sinus lateral wall in dentate and edentulous patients using cone beam computed tomography (CBCT). This study also provides information about the diameter, prevalence, and course of the posterior superior alveolar artery (PSAA), and its relation to the maxillary sinus floor.

MATERIALS AND METHODS

Four hundred and thirty CBCT scans of the maxillofacial complex (860 maxillary sinuses) were reviewed. Measurements of the lateral wall of the maxillary sinus and PSAA were performed on the CBCT images.

RESULTS

Statistical analysis showed that dental status (edentulous, non-edentulous) of the patients had no significant effect on the lateral wall thickness. The mean thickness of the lateral wall of the maxillary sinus was 1.21 ± 1.07 mm at the second molar (M2), 1.98 ± 1.87 mm at the first molar (M1), 2.02 ± 1.53 mm at the second premolar (P2) and 2.16 ± 1.25 mm at the first premolar (P1). There was statistically significant difference between the left and right sides of the maxillary sinus only at P2 (p =.043). Detection rate of the PSAA on CBCT was reported as 60.58%. The mean diameter of the artery was 1.17 mm (range 0.4-2.8 mm). There was no significant correlation between age and the size of the PSAA. The most frequent path of the PSAA was intraosseous (69.6%), followed by intrasinusal (24.3%) and superficial (6.1%). The overall mean distance of the PSAA from the floor of the maxillary sinus is 8.16 mm.

CONCLUSIONS

The results from this study suggest that using CBCT prior to the surgery provides valuable diagnostic information. However, undetected intraosseous canal in CBCT does not exclude its existence. Alteration in the lateral window design and the use of piezoelectric instruments are recommended if intraoperative complications are expected.

A novel implant system dedicate to hydraulic Schneiderian membrane elevation and simultaneously bone graft augmentation: An up-to 45 months retrospective clinical study

PURPOSE

To evaluate clinical and radiographic performance of a novel implant system that allows for hydraulic Schneiderian membrane elevation and simultaneously bone graft augmentation.

MATERIALS AND METHODS

Sixty-two consecutive patients with a mean age of 53.1 years and a severe atrophy of the posterior maxilla (3.0 to 7.0 mm) underwent 64 transcrestal sinus floor elevations and submerged implant placement. The following clinical and radiographic parameters were assessed: implant failure, any complications and bone gain measured using cone beam computed tomography.

RESULTS

No patient dropped out. No implants failed and all the prostheses were uneventful at the last follow-up examination (mean 23.0 months; range 12-45). All the procedures were completed successfully, with elevation of the sinus membrane and insertion of bone graft and the dental implant at the planned site. No intraoperative or postoperative adverse events were observed, such as membrane tears or facial hematoma. The mean residual alveolar ridge height was 5.2 ± 1 mm (range 3.3-7.0 mm). Mean bone gain was 10.9 ± 2.43 mm (range 5.3-16.5) after an average healing period of 8 months.

CONCLUSIONS

Hydraulic elevation of the Schneiderian membrane using the iRaise sinus-lift system (Maxillent Ltd) can be considered a valuable treatment option for the rehabilitation of atrophic edentulous posterior maxillae.

Histological outcomes of sinus augmentation for dental implants with calcium phosphate or deproteinized bovine bone: a systematic review and meta-analysis

This study compared the histological outcomes of deproteinized bovine bone (DBB) and technically derived calcium phosphate for sinus floor augmentation. MEDLINE, PubMed, Cochrane, EMBASE, and Google Scholar databases were searched until April 2015 with the following key words: dental implants, augmentation/augmented, calcium phosphate/ceramic/tricalcium phosphate, bovine bone/Bio-Oss, deproteinized/anorganic. Randomized controlled trials (RCTs) and two-arm prospective/retrospective studies that used DBB or biphasic calcium phosphate/tricalcium phosphate (BCP/TCP) for sinus augmentation with quantitative results were included. Outcomes were the percentage of new bone formed and percentage of surface contact between the graft material and new bone (bone-to-graft contact). Four RCTs and one prospective study were included, with a total of 110 patients and 145 implants. All studies reported the percentage of new vital bone; however, large heterogeneity was present (Q=15.23, P=0.004, I²=73.8%). BCP/TCP was associated with a higher percentage of new bone, but the pooled results did not reach significance (pooled standardized mean difference (SMD)=0.145, 95% confidence interval (CI) -0.488 to 0.778, P=0.654). Only two studies reported bone-to-graft contact, and BCP/TCP was associated with significantly lower bone-to-graft contact (pooled SMD=-0.807, 95% CI -1.276 to -0.337, P=0.001). This meta-analysis does not allow us to conclude superiority of one particular material with respect to histological outcomes.

Marginal and apical bone stability after staged sinus floor augmentation using bone condensing implants with variable-thread design: a two-dimensional analysis

Studies on the vertical stability of augmented bone after sinus lifting differ substantially. In addition, long healing periods are usually advocated prior to implant installation. The purpose of this case series study was to evaluate the changes in bone height after sinus lifting with a bovine-derived xenograft and to evaluate the clinical outcome of bone condensing implants installed after a short healing period. Patients treated during the years 2010-2013 were re-examined using peri-apical radiographs to evaluate the changes in augmented bone height (BH) and marginal bone loss (BL). Fifty-seven of 70 eligible subjects (28 male and 29 female, mean age 56 years) attended for reassessment. Data were available for 53 sinus lifts and 105 implants installed after a mean healing period of 4.6±1.5 months. Implant survival was 99% after a mean time in function of 19±9 months. Baseline BH, BH at implant placement, and final BH were on average 3.87±1.74mm, 13.75±2.12mm, and 13.11±2.12mm, respectively (P<0.001). Mean BL was 0.51±0.65mm. Only limited resorption is to be expected after sinus lifting in the short term. A bone condensing implant can be used in the early healing phase with successful outcomes in terms of implant survival and bone adaptation.

Accuracy of Schneiderian membrane thickness: a cone-beam computed tomography analysis with histological validation

OBJECTIVES

Cone-beam computed tomography (CBCT) has been used in the literature to evaluate Schneiderian membrane thickness (SMT), but its accuracy has never been validated. The primary aim of this study was to compare the SMT measured by CBCT to the gold standard histological assessment. The correlations between SMT and anatomical structures of the maxillary sinus and alveolar bone were also tested.

MATERIALS AND METHODS

Fourteen fresh cadaver heads were used for the study, and 28 sinus lift augmentation procedures were performed to obtain the membrane samples. Samples were fixed in formalin and stained with hematoxylin-eosine and Masson trichrome. Specimens were measured by optic microscope at three points, and a mean was obtained. Anatomical landmarks were used to accurately position the CBCT slice, so the SMT could be measured in predetermined locations. Wilcoxon signed-rank test was used to compare values of histological and CBCT measurements, and Spearman's correlation coefficient was calculated to examine the relationship between thickness and anatomical parameters.

RESULTS

A total of 597 histological measurements were performed, and the mean SMT thickness was 0.30 ± 0.17 mm. The mean CBCT membrane thickness was 0.79 ± 0.52 mm. A statistically significant difference from histological and radiological readings was observed (P = 0.000). Interestingly, 87.77% histological measurements had membrane less than 0.5 mm in thickness compared to 26.66% in CBCT assessment.

CONCLUSIONS

Within the limitation of this study, the median histological Schneiderian membrane thickness was 0.30 mm. Cone-beam computed tomography assessment was 2.6 times higher than the histological examination.

Clinical, Radiographic, and Histologic Evaluation of Maxillary Sinus Lift Procedure Using a Highly Purified Xenogenic Graft (Laddec(®))

OBJECTIVES

The aim of this study was to evaluate the clinical, radiographic and histologic results when a highly purified xenogenic bone (Laddec(®)) was used as grafting material in maxillary sinuses.

MATERIAL AND METHODS

In fifteen patients requiring unilateral maxillary sinus augmentation, the grafting procedure was performed with Laddec(®). Forty-two implants were installed after a 6 month healing period. The height of the augmented sinus was measured radiographically immediately after augmentation and postoperatively up to 36 months. At the time of implant placement, a bone core was harvested in each patient for histological examination.

RESULTS

The cumulative implant survival rate was 97.6%. The original height was 3.65 (SD 0.7) mm and the augmented sinus height was 13.8 (SD 1.4) mm after the surgery. The reduced height of grafted xenogenic material (RDL) at the implant insertion was 0.83 (SD 0.38) mm, and at the final postoperative visit was 0.91 (SD 0.25) mm, showing no significant correlation with the follow-up periods by Spearman's test (P = 0.118). In addition, no significant difference in the RDL was observed according to the site of implantation (P = 0.682). The mean implant marginal bone loss was 0.38 (SD 0.24) mm. Histological analysis showed the bone cores were composed of 64.72 (SD 3.44)% newly formed bone, 17.41 (SD 2.02)% connective tissue, 16.93 (SD 2.83)% residual graft particles, and 0.94 (SD 0.11)% inflammatory cells.

CONCLUSIONS

According to our data, the highly purified xenogenic bone (Laddec(®)), used as graft material in the sinus lift procedure, may create adequate bone volume, and appropriate osseointegration of dental implants.

Sinus mucosa elevation using Bio-Oss® or Gingistat® collagen sponge: an experimental study in rabbits

OBJECTIVE

To describe the sequential healing in augmented sinus cavities with deproteinized bovine bone mineral (DBBM) granules or collagen sponges.

MATERIAL AND METHODS

Twenty albino New Zealand rabbits were included in the study. An incision was performed along the midline of the nasal dorsum, and the nasal bone was exposed. Circular bony windows with a diameter of 5 mm were prepared bilaterally. After elevation of the mucosa, the two sites were randomly filled with either DBBM or a collagen sponge. Five animals each were randomly sacrificed after 7, 14, 21 and 40 days, respectively.

RESULTS

At both sides, new bone was found forming from the resident pristine bone. During the first stage of healing, DBBM granules were surrounded by a denser connective tissue that was attached to the biomaterial surface and that was progressively mineralized. At the collagen sponge side, the biomaterial was almost completely resorbed and the space was reduced by to two-thirds already after 21 days. At both sides, after 40 days, mineralized bone and marrow spaces were occupying large areas of the elevated space.

CONCLUSIONS

New bone was found forming from the pristine bony walls of the sinus and extending toward the most peripheral regions in both sites. While DBBM particles yielded osteoconductivity and were able to preserve over time the space within the elevated mucosa, the collagen sponge failed the goal of maintaining the space.

Management of acute maxillary sinusitis after sinus bone grafting procedures with simultaneous dental implants placement - a retrospective study

Background

The sinus lift was first described in 1974 and it has proven to be a predictable procedure ever since. The complications of this surgical procedure are reported in the literature to be low, and can include acute maxillary sinusitis, scattering of the grafting material into the sinus cavity, wound dehiscence and Schneiderian membrane perforations. We aimed to evaluate the rate of acute maxillary sinusitis after sinus lift procedures and the appropriate management strategies.

Methods

Between 2013 and 2015, 245 dental implants were placed in 116 patients (76 males and 40 females) with concomitant bone augmentation of the maxillary sinus floor. The sinus lifting procedure was bilateral in 35 patients and unilateral in 81 patients (a total of 151 sinuses).

Results

Maxillary sinusitis occurred in 5 patients (4.3 %). The clinical signs of infection were: headache, locoregional pain, cacosmia, inflammation of the oral buccal mucosa and rhinorrhea or unilateral nasal discharge. A mucosal fistula was observed during inspection in one patient. The management included only the removal of the grafting material in 3 patients, in 1 patient the grafting material was removed together with all the implants, and in 1 patient only 2 implants and the grafting material were removed, 1 implant being left in place. The sinus cavity was irrigated with metronidazole solution and antibiotic therapy with clindamycin and metronidazole was prescribed for 10 days. Subsequently, all signs of infection disappeared within 5 to 7 days and normal sinus function and drainage were restored.

Conclusions

Although sinus lift is regarded as a safe and reliable procedure, acute sinusitis is a possible complication which has to be managed immediately in order to reduce the risk of further complications like pansinusitis, osteomyelitis of the maxillary bone, and spreading of the infection in the infratemporal space or orbital cavity. To minimize risk, caution must be taken with all the steps of the procedure, in order not to obliterate the ostium, impairing maxillary sinus clearance.

Late-term healing in an augmented sinus with different ratios of biphasic calcium phosphate: a pilot study using a rabbit sinus model

PURPOSE

The aim of this pilot study was to determine the osteoconductivity and dimensional stability of augmented sinuses using different ratios of biphasic calcium phosphate (BCP) in a rabbit sinus model.

METHODS

Each sinus of New Zealand white rabbits (2.5-3.5 kg) was assigned to one of two groups: BCP with a hydroxyapatite to β-tricalcium phosphate (HA:β-TCP) ratio of 70:30 (group TCP30) and BCP with an HA:β-TCP ratio of 30:70 (group TCP70). After preparing a window in the antral wall of a sinus, the Schneiderian membrane was elevated, and the applicable material was grafted. A fluorochrome calcein green was injected five days before euthanizing the animals at four months post-surgery. The specimens were analyzed histologically, histomorphometrically, and by using micro-computed tomography (micro-CT).

RESULTS

Micro-CT analysis revealed that the total augmented volume and the new bone volume did not differ significantly between the two groups whereas the resorption of materials was greater in the TCP70 group. The trabecular thickness, number, and separation also did not differ significantly between the two groups. Histomorphometrically, the areas of total augmentation, new bone, and residual material, as well as the ratio of new-bone-material contact did not differ significantly between the groups. Histologically, the residual particles were more scattered in the TCP70 group than in the TCP30 group. The fluorescence of the calcein green did not differ notably between the two groups.

CONCLUSIONS

The osteoconductivity and dimensional stability of the two BCPs with different ratios tested in this study were comparable after four months of healing. Therefore, we conclude that both BCPs show promise as a bone substitute for sinus augmentation.

Complications when augmenting the posterior maxilla

The maxillary posterior edentulous region presents a challenge when planning for restoring missing teeth with a dental implant. The available bone in such cases is often not dense and not adequate for the placement of a properly sized implant because of maxillary sinus pneumatization and alveolar bone loss. Maxillary sinus lift is a predictable procedure to provide adequate bone height for the purpose of implant placement. However, complications are encountered during or after the execution of the sinus lift procedure. In this article, the prevention and management of maxillary sinus complications are discussed.

Maxillary sinus floor augmentation and dental implant placement using dentin matrix protein-1 gene-modified bone marrow stromal cells mixed with deproteinized boving bone: A comparative study in beagles

OBJECTIVE

The aim of the study was to evaluate the effects of the combined use of dentin matrix protein-1 (DMP1) gene-modified bone marrow stromal cells (BMSCs) and Bio-Oss(®) for maxillary sinus floor augmentation (MSFA) implant placement in dogs.

MATERIALS AND METHODS

BMSCs were derived from bone marrow of six beagles and cultured. The cells were transduced with a lentiviral vector overexpressing the DMP1 gene and enhanced green fluorescent protein (EGFP) gene (Lenti-DMP1/EGFP) in test group, and with a lentiviral vector encoding EGFP gene (Lenti-EGFP) in control group. Six dogs received sinus augmentations using the bilateral approach with a simultaneous implant placement at each site respectively. At the same concentration, 2×10(7) cells/ml, one sinus was grafted using a mixture of autologous DMP1/EGFP gene-modified BMSCs and Bio-Oss(®) (DMP1 group), and the contralateral sinus was grafted with autologous EGFP gene-modified bMSCs and Bio-Oss(®) (EGFP group). After a 3 month healing period, bone regeneration and osseointegration were evaluated using histologic and histomorphometric methods.

RESULTS

The bone-implant contact (BIC) and the bone area fraction in the DMP1 group (BIC: 34.67%±8.23%, bone area fraction: 35.16%±3.32%) were significantly greater compared with the EGFP group (BIC: 26.06%±5.16%, bone area fraction: 20.74%±1.63%) (P<0.05). No significant difference between the residual bone substitute material volume (BSMV) in the DMP1 group (35.86±7.35) and the EGFP group (32.16±9.16) was found in our study (P>0.05).

CONCLUSION

BMSCs modified with the DMP1 gene can be used as an adjunct to Bio-Oss(®) to enhance new bone formation and the osseointegration of dental implants in MSFA of dogs.

Effects of a collagen membrane positioned between augmentation material and the sinus mucosa in the elevation of the maxillary sinus floor. An experimental study in sheep

OBJECTIVE

To assess the influence of a collagen membrane placed subjacent to a pristine sinus mucosa on the healing outcome of a sinus floor elevation procedure.

MATERIALS AND METHODS

Eight Pelibuey sheep (Cubano rojo) underwent sinus floor elevation on both sides of the maxilla. At a randomly selected side (test), a collagen membrane was placed subjacent to the sinus mucosa, while the contralateral side (control) was left without the placement of a membrane. Deproteinized bovine bone mineral (DBBM) was used to fill the space created. A collagen membrane was placed bilaterally to cover the access osteotomy. After 4 months, biopsies were harvested and ground sections prepared. Morphometric analysis was performed in four different regions, three within the elevated area and one at the site of the osteotomy.

RESULTS

The total percentages of mineralized new bone within the elevated area were 29.4 ± 16.2% and 30.9 ± 9.2% and of marrow spaces 44.0 ± 23.0% and 45.6 ± 14.1%, at the Non-membrane and at the Membrane sites, respectively. A low content of connective tissue within the elevated area was noticed. A higher content of connective tissue was found in the osteotomy region, however. Remnants of DBBM granules were found at a percentage of 17-19%. No statistically significant differences were observed between test and control sites.

CONCLUSION

The application of a collagen membrane subjacent to the Schneiderian mucosa in a sinus floor elevation procedure did not influence the healing outcomes at all.

Maxillary sinus augmentation using sinus membrane elevation without grafts - A Systematic Review

Implants have a predictable outcome and are the foremost treatment modality for prosthetic rehabilitation of edentulous patients. Due to loss of bone after extraction and pneumatization of maxillary sinus, there is insufficient bone volume for implant placement. The direct maxillary sinus lift procedure has been performed with different grafting materials (autogenous bone grafts, alloplasts, allografts, and xenografts) and without grafting material, having new bone formation around the implant. There is no evidence to prove the need for grafting material in all direct sinus lift procedures, hence the need for this review. Previous meta-analysis showed that survival rates of implants placed in grafted maxillary sinuses had similar survival rates whether autogenous, allogenous, or alloplastic grafts were used. This paper aims to review scientific data on the direct sinus elevation technique without use of any grafting material, volume of new bone formed, and also mechanism behind this technique. Articles were searched from 1997 to October 2014 in PubMed, Google Scholar, and Cochrane CENTRAL. The study eligibility criteria were (1) direct sinus lift procedure without any graft material during implant placement and (2) human or animal studies with a minimum follow-up of 6 months or more. Two authors independently scrutinized the literature and if any controversy was raised, third author's opinion was sought to arrive at a mutual consensus for including the study in the review. Due to the heterogeneity across all studies in all study designs, the data were not pooled and a meta-analysis was not performed. Taking into consideration all factors reviewed in this regard along with the outcomes, the direct sinus lift technique without grafting can be suggested as a viable treatment option keeping in mind the limitations involved. The average bone gain was seen across all studies ranging from 2.37 to 10 mm and with an implant survival rate ranging from 79.9% to 100% across studies.