Alveolar ridge changes 1-year after early implant placement, with or without alveolar ridge preservation at single-implant sites in the aesthetic region: A secondary analysis of radiographic and profilometric outcomes from a randomized controlled trial

OBJECTIVES

To assess both the radiographic and profilometric outcomes of early implant placement with or without alveolar ridge preservation (ARP) (using two different ARP techniques) after 1 year of loading.

MATERIALS AND METHODS

Seventy-five patients with a failing single tooth in the anterior maxilla were randomly allocated to three groups (1:1:1): (a) ARP using demineralized bovine bone mineral containing 10% collagen (DBBM-C) covered by a collagen matrix (CM), (b) ARP using DBBM-C covered with a palatal graft (PG), and (c) unassisted socket healing (control). Eight weeks after tooth extraction, early implant placement was performed in all patients. Cone-beam computed tomography (CBCT) and impressions were taken 8 weeks after tooth extraction (ARP/unassisted healing) prior to implant placement and 1-year post-loading. Radiographic and profilometric outcomes were evaluated.

RESULTS

Out of the 70 patients available for re-examination at 1-year post-loading, 55 datasets could be assessed (ARP-CM 19; ARP-PG 17; Control 19). The need for additional guided bone regeneration (GBR) at implant placement amounted to 31.6% (ARP-CM), 29.4% (ARP-PG), and 68.4% (unassisted healing). Adjusted models revealed that residual buccal bone height and additional GBR at implant placement significantly influenced the magnitude of the alveolar changes at 1 year (p < 0.05). In patients with ARP (group ARP-CM or ARP-PG) without additional GBR, the presence of bone convexity amounted to 36.0% (9/25) at 1-year post-loading. For patients that received ARP and additional GBR at implant placement, the frequency of bone convexity increased to 72.7% (8/11) (p = 0.042). Regarding profilometric measurements, a tendency toward agreement with radiographic outcomes was observed.

CONCLUSIONS

Early implant placement with ARP can attenuate alveolar ridge changes at 1-year post loading by minimizing both radiographic and profilometric alterations. However, early implant placement with simultaneous GBR consistently yields superior radiographic and profilometric outcomes, regardless of whether ARP is performed.

The facial-coronal ridge crest alterations after single immediate implant placement and provisionalization with thin buccal plate phenotype in anterior maxilla: A radiographic case-series study

AIM

To explore the features of and potential landmarks that predict crestal ridge remodeling after immediate implant placement and provisionalization (IIPP) with thin buccal plate phenotype in the anterior maxilla.

MATERIALS AND METHODS

Patients requiring IIPP of single maxillary incisor with thin buccal bone plate (<1 mm) were recruited. Cone-beam computed tomography (CBCT), performed before and 6 months after the intervention, were three-dimensionally superimposed. A virtual line connecting the bony emergence points of adjacent teeth was drawn as a reference. The facial-coronal alveolar crest of the extraction socket and healed ridge were located in mesial, middle and distal cross-sectional planes, and linear ridge reductions were measured. The correlation between ridge reduction and local factors was analyzed.

RESULTS

Fifty patients were included. From the extraction socket to healed ridge, the alveolar crest underwent linear bone reduction of 1.50 ± 0.50, 1.54 ± 0.66 and 1.65 ± 0.73 mm in the mesial, middle, and distal regions in an apical-palatal direction. The middle region had significantly higher horizontal (facial-palatal) but lower vertical (coronal-apical) bone reduction than the mesial and distal areas (P < 0.01). The facial-coronal ridge crest of the healed ridge located close to the reference line. Ridge reduction positively correlated with the distance between the initial facial-coronal crest of the extraction socket and the reference line (P < 0.01).

CONCLUSIONS

Alveolar crest of the socket lost its curvature and tended to attain a flat profile after IIPP due to inconsistent ridge reduction in middle, mesial and distal areas. The reference line may be a potential landmark for predicting the ridge crest after remodeling.

A radiographic and histological study to compare red (650 nm) versus near infrared (810 nm) diode lasers photobiomodulation for alveolar socket preservation

Previous findings indicated that the laser photobiomodulation is more effective than the control or placebo in preserving the alveolar socket. This study aimed to compare two different lasers regarding their effectiveness in aiding alveolar socket preservation. Twenty extraction sockets were selected then divided into two equal groups. Group A was exposed to 650 nm Diode laser, and Group B to 810 nm Diode laser following the same protocol and parameters after a standard alveolar socket preservation procedure with collagen plug. Radiographic analysis with cone beam computed tomography was done to compare the alveolar bone surface area immediately after extraction and three months post-operatively, while bone samples collected before implant drilling were histologically examined for newly formed bone evaluation and histomorphometric analysis in terms of percentage of new bone surface area, percentage of unmineralized bone and finally, immunohistochemical analysis of Osteocalcin reaction surface area as well as optical density. Radiographically, infrared (810 nm) Diode effect on alveolar bone surface area has significantly exceeded the red laser, while histologically, red (650 nm) Diode has demonstrated statistical significance regarding all parameters; newly formed bone surface area percentage, unmineralized bone area percentage and finally Osteocalcin bone marker reaction surface area percentage and optical density. Under the specified conditions and laser parameters, photobiomodulation using the 810 nm Diode got the upper hand radiographically, yet histologically, the red 650 nm Diode managed to dominate all histological parameters when both employed as an adjunct to alveolar socket preservation procedures.

Immediate Implant Placement Using the Socket Shield Technique: Clinical, Radiographic, and Volumetric Results Using 3D Digital Techniques-A Case Series

Extraction-site alveolar remodeling is a major concern due to negative volumetric hard and soft tissue changes that inevitably limit rehabilitation options and diminish esthetic outcomes. Surgical techniques employed to minimize alveolar dimensional changes are not always predictable. Utilizing a socket shield with an immediate surgical implant procedure helps maintain a thin portion of the root in the vestibular area and thus minimizes bone resorption, especially at the coronal cortical aspect. This case series assesses the dimensional changes in peri-alveolar structures via superimposition of the preoperative and 6-month postoperative 3D digital quantification of soft tissue. Fifty patients with 50 sites fulfilled the inclusion criteria. Implant survival was 100%, with no incidence of complications. Tissue changes were as follows: -0.85 mm at the mesial papilla, -0.95 mm at the distal papilla, -0.7 mm at both the vertical and horizontal central margins, -0.21 mm at a distance 4 mm from the margin, and -0.64 mm at the palatal central margin. The buccal contour was clinically convex in all cases. The site with highest frequency of > 1 mm of dimensional loss was the distal papilla (42% of sites), and the site with the lowest frequency was the point 4 mm from the midfacial margin (0% of sites).

Clinical and radiographic outcomes of implants placed in extraction sites treated with alveolar ridge preservation: a 10-year retrospective analysis of a case series

OBJECTIVES

The aim of the present study was to evaluate clinical and radiographic outcomes of implants placed in alveolar sockets treated by means of alveolar ridge preservation after 10 years of follow-up.

METHOD AND MATERIALS

Eleven patients treated with 11 implants placed after alveolar ridge preservation using bovine-derived xenograft particles and collagen membrane were selected. Full-mouth plaque score, full-mouth bleeding score, probing depth at four sites per implant, and radiographic marginal bone level at mesial and distal aspects for each implant were recorded at baseline and after 10 years of follow-up. The primary outcome was the radiographic marginal bone loss. The marginal bone loss was considered as the difference between marginal bone level at baseline and after 10 years of observation time.

RESULTS

After 10 years of follow-up, full-mouth plaque score increased significantly (P < .05), while no statistically significant differences were found in the change in full-mouth bleeding score (P ≥ .05). At the 10-year observation period, a significant increase in probing depth was observed at all sites (P < .05), except at the mesial aspects (P ≥ .05). Radiographic marginal bone loss was 1.1 ± 0.1 mm and 1.0 ± 0.1 mm at mesial and distal sites, respectively.

CONCLUSION

Whitin the limitations of the present study, implants placed in post-extraction sockets treated with alveolar ridge preservation yielded stable clinical and radiographic results after 10 years of follow-up.

Alveolar Ridge Preservation Using the One-Piece Autologous Tuberosity Graft: A Clinical, Radiological, and Histological Pilot Study

This prospective study investigated clinically and radiologically the effectiveness of the use of a combined hard and soft tissue graft retrieved from the maxillary tuberosity and designed for alveolar ridge preservation following tooth extraction. Seven patients scheduled for a single mono-rooted tooth extraction were included in the study. After atraumatic extraction, sockets were filled with a "one-piece" dual tissue graft harvested from the tuberosity using an adjusted trephine. CBCTs were performed before the extraction and 4 months after ridge preservation, to analyze the vertical and horizontal alterations of the ridge, using ITK-Snap software. Clinical measurements of both soft and hard tissues were also assessed during the extraction and implant placement. All sites healed uneventfully. After 4 months, the 3D super-imposition of both CBCTs showed a mean bone volume resorption of 65 ± 76.7 mm3 (10.2 ± 10%). The mean horizontal reduction at 2, 4, and 6 mm from the top of the crest was respectively 1.5 ± 1.3 mm, 0.47 ± 1.4 mm and 0.57 ± 0.7 mm, while the mean vertical loss was 0.026 mm ± 2 mm. The mean soft tissue horizontal gain was 1.73 ± 1.12 mm. The "one-piece" autologous tuberosity graft was proven to be a safe and effective alveolar ridge preservation technique and may represent a feasible, user-friendly, time saving, low-cost solution for minimizing dimensional loss following tooth extraction.

Five-Year Clinical, Radiographic, and Cone-Beam Follow-Up of Socket Shield Technique in Two Cases Treated with a Split Mouth Design

The two presented cases of socket shield technique were done following a split mouth protocol in two patients, each received an immediate implant inserted conventionally on maxillary one side and another implant inserted applying the socket shield technique on the contralateral side. The outcomes including soft and hard tissue changes were compared clinically and radiographically. The four implants were followed for 5 years, and the outcomes were successful.

Efficacy of Autogenous Dentin Biomaterial on Alveolar Ridge Preservation: A Randomized Controlled Clinical Trial

Background

After tooth extraction, alveolar bone resorption is inevitable. This clinical phenomenon challenges dental surgeons aiming to restore esthetic and function. Alveolar ridge preservation can be applied to minimize dimensional changes with a new socket grafting material, an autogenous dentin graft, produced by mechanically and chemically processing natural teeth. This study assessed the safety and efficacy of using autogenous dentin biomaterial in alveolar ridge preservation.

Materials and Methods

Patients with nonrestorable maxillary anterior teeth bounded by natural sound teeth were included in this study. After a detailed clinical and tomographic examination, eligible participants were randomly allocated into two groups. The control group had spontaneous healing of extraction sockets. The study group had their extraction sockets filled with autogenous dentin biomaterial after processing their extracted retained roots with the KometaBio device. Standardized cone beam computed tomography (CBCT) scans were repeated four months later. A full-thickness mucoperiosteal flap reflection was achieved under local anesthesia to get core biopsies for histomorphometric analysis, and dental implants were placed at the same session.

Results

A total of 32 eligible patients were included in this study (n = 16 in each group). Both groups had significantly higher facial soft tissue thickness after four months than baseline (p < 0.05). However, the study group showed statistically significant lesser dimensional changes than the control group according to the standardized CBCT scans. Furthermore, core biopsies confirmed an excellent remodeling of the autogenous dentin biomaterial in the study group. In comparison, only new thin bone trabeculae-filled sockets were in the control group.

Conclusion

Autogenous dentin graft can be safely and successfully used for alveolar ridge preservation. Optimal graft remodeling histologically, better ridge dimensional stability, and uneventful wound healing support its clinical application. This trial is registered with TCTR20220615002.

The impact of immediate versus delayed mini-screw placement on alveolar bone preservation and bone density following tooth extraction: evidence from a canine model

The aim of this study was to evaluate the impact of mini-screw placement on the alveolar ridge using a split-mouth design. Twelve beagles underwent bilateral extraction of their lateral teeth. In the immediate group, a mini-screw was unilaterally placed approximately 3-4 mm below the alveolar crest of the extraction site on the experimental side. The delayed group received mini-screws six weeks after tooth extraction. On average, the dogs were sacrificed after 11 weeks, and the maxillary bones were excised and scanned using cone-beam computed tomography (CBCT). Histopathological examinations were conducted to assess inflammation and bone formation scores. The results showed that in the immediate group, bone height was significantly greater on the intervention side compared to the control side (p < 0.05), whereas there was no significant difference in the delayed group. In both groups, there was a significant increase in bone density around the mini-screws compared to the control sides (p < 0.05). Mini-screw insertion led to a significant enhancement of bone growth in both groups (p < 0.05), with no notable differences between the two groups. The mini-screws did not have any impact on bone inflammation or width. Overall, both immediate and delayed mini-screw placement in the extraction socket positively influenced bone dimensions, density, and histological properties. However, immediate insertion was more effective than delayed placement in preserving vertical bone height, despite delayed insertion resulting in higher bone density.

Radiographic evaluation of alveolar ridge preservation using a chitosan/polyvinyl alcohol nanofibrous matrix: A randomized clinical study

The objective of this randomized clinical trial (RCT) was to assess the effectiveness of electrospun chitosan/polyvinyl alcohol (CS/PVA) nanofibrous scaffolds in preserving the alveolar ridge and enhancing bone remodeling following tooth extraction when compared to a control group. In this split RCT, 24 human alveolar sockets were randomly assigned to two groups, with 12 sockets receiving CS/PVA nanofibrous scaffold grafts (test group) and 12 left to heal by secondary intention as the control group. Cone-beam computed tomography (CBCT) was performed at two different time points: immediately after extraction (T0) and 4 months post-extraction (T4). After 4 months, linear vertical and horizontal radiographic changes and bone density of extraction sockets were assessed in both the test and control groups. The RCT included 12 patients (4 male and 8 female) with a mean age of 24 ± 3.37 years. The test group had a significantly lower mean vertical resorption vs the control group, with a mean difference of 1.1 mm (P < 0.05). Similarly, the control group's mean horizontal bone resorption was -2.01 ± 1.04 mm, while the test group had a significantly lower mean of -0.69 ± 0.41 mm, resulting in a mean difference of 1.35 mm (P < 0.05). Furthermore, the study group exhibited a significant increase in bone density (722.03 ± 131.17 HU) after 4 months compared to the control group (448.73 ± 93.23 HU). In conclusion, we demonstrated within the limitations of this study that CS/PVA nanofibrous scaffold significantly limited alveolar bone resorption horizontally and vertically and enhanced bone density in alveolar sockets after 4 months when compared to results in the control group (TCTR20230526005).

Alveolar ridge preservation of damaged or periodontally compromised extraction sockets with bovine- and porcine-derived block bone substitutes: A retrospective case-control study

PURPOSE

Alveolar ridge preservation (ARP) was introduced to minimize postextraction alveolar bone loss and extraction socket remodeling; however, current knowledge of the ARP procedure for nonintact extraction sockets is still limited and inconclusive. This retrospective study aimed to evaluate the difference between using deproteinized bovine bone mineral with 10% collagen (DBBM-C) and deproteinized porcine bone mineral with 10% collagen (DPBM-C) when performing ARP procedures in damaged or periodontally compromised extraction sockets based on clinical, radiographic, and profilometric outcomes.

METHODS

In total, 108 extraction sockets were grafted with 67 DBBM-C and 41 DPBM-C. Changes in radiographic (horizontal width and vertical height) and profilometric outcomes were measured after the ARP procedure and before the implant surgery. Postoperative discomfort (including the severity and duration of pain and swelling), early wound healing outcomes (including spontaneous bleeding and persistent swelling), implant stability, and treatment modalities for implant placement were also assessed.

RESULTS

Radiographically, the DBBM-C group decreased by -1.70 ± 2.26 mm (-21.50%) and - 1.39 ± 1.85 mm (-30.47%) horizontally and vertically, and the corresponding DPBM-C group decreased by -1.66 ± 1.80 mm (-20.82%) and -1.44 ± 1.97 mm (-27.89%) horizontally and vertically at an average of 5.6 months. There were no serious or adverse complications in any of the cases, and none of the measured parameters differed significantly between the groups.

CONCLUSION

Within the limitations of this study, ARP with DBBM-C and DPBM-C showed similar clinical, radiographic, and profilometric outcomes in nonintact extraction sockets.

Radiographic comparison of atelocollagen versus deproteinized bovine bone minerals covered with a collagen membrane in alveolar ridge preservation: a retrospective study

BACKGROUND

Atelocollagen (AC) is a low-immunogenic collagen derivative with longer degradation time, which can be a suitable material for alveolar ridge preservation (ARP). However, there are few human studies on AC using for ARP. This research aims to radiographically evaluate the efficacy of AC in comparison to deproteinized bovine bone minerals covered with a collagen membrane (DBBM/CM) in ARP.

METHODS

Medical records in the Implantology Department of the Hospital of Stomatology of Wuhan University were screened for patients who received flapless ARP using either AC or DBBM/CM. A total of 58 patients were included in this retrospective study. 28 patients were treated with AC, while 30 patients were used DBBM/CM. Cone-beam computed tomography (CBCT) scans were taken before extraction and after 6 months of healing. To assess the dimensional change of the extraction sockets, the scanning data were output and transferred to the digital software to measure horizontal bone width change, vertical bone height change and bone volume change in region of interest. To evaluate the bone quality of healed sockets, the bone density of virtual implants was evaluated.

RESULTS

The horizontal bone width changes at all five different levels showed no significant difference between the two groups. The largest horizontal bone width decrement in both groups occurred at the crest of ridge, which decreased 3.71 ± 1.67 mm in AC group and 3.53 ± 1.51 mm in DBBM/CM group (p = 0.68). At the central buccal aspect, the ridge height reduced 0.10 ± 1.30 mm in AC group, while increased 0.77 ± 2.43 mm in DBBM/CM group (p = 0.10). The vertical bone height differences between two groups showed no statistical significance. The percentages of volume absorption in AC group and DBBM/CM group were 12.37%±6.09% and 14.54%±11.21%, respectively. No significant difference in volume absorption was found (p = 0.36). The average bone density around virtual implants in AC group (649.41 ± 184.71 HU) was significantly lower than that in DBBM/CM group (985.23 ± 207.85 HU) (p < 0.001).

CONCLUSIONS

ARP with AC had a similar effect on limiting the dimensional alteration of alveolar ridge, when radiographically compared with DBBM/CM.

Evaluation of alveolar ridge preservation in sockets with buccal dehiscence defects using two types of xenogeneic biomaterials: An in vivo experimental study

OBJECTIVES

Alveolar ridge preservation (ARP) has been extensively investigated in various preclinical and clinical studies, yielding favorable results. We aim to evaluate the effects of ARP using collagenated bovine bone mineral (CBBM) alone or particulated bovine bone mineral with a non-cross-linked collagen membrane (PBBM/NCLM) in tooth extraction sockets with buccal dehiscence in an experimental dog model.

MATERIALS AND METHODS

The mesial roots of three mandibular premolars (P2, P3, and P4) were extracted from six mongrel dogs 4 weeks after inducing dehiscence defects. ARP was randomly performed using two different protocols: 1) CBBM alone and 2) PBBM/NCLM. Three-dimensional (3D) volumetric, micro-computed tomography, and histological analyses were employed to determine changes over a span of 20 weeks.

RESULTS

In 3D volumetric and radiographic analyses, CBBM alone demonstrated similar effectiveness to PBBM/NCLM in ARP (p > .05). However, in the PBBM/NCLM group (3.05 ± 0.60 mm), the horizontal ridge width was well maintained 3 mm below the alveolar crest compared with the CBBM group (2.11 ± 1.01 mm, p = .002).

CONCLUSION

Although the radiographic changes in the quality and quantity of bone were not significant between the two groups, the use of PBBM/NCLM resulted in greater horizontal dimensions and more favorable maintenance of the ridge profile.

Mixing Allograft and Xenograft for a Predictable Alveolar Ridge Preservation Procedure: A Case Series

BACKGROUND

An alveolar ridge preservation (ARP) procedure is commonly performed to preserve ridge width and height for optimal dental implant placement. Mixing different sources of bone grafts may help maximize their properties to obtain predictable ARP results.

OBJECTIVE

The aim of this case series is to highlight the clinical and radiographic outcomes of a combined allograft and xenograft approach for a predictable ARP procedure.

MATERIALS AND METHODS

Eleven clinical cases that required tooth extraction and future implant placement were selected for this case series. All surgeries were performed by a single clinician in a private practice setting. All cases underwent an ARP procedure, which included atraumatic extraction, degranulation, assessment of the socket, and the use of a combination of allograft and xenograft fibers/granules in a 1:1 mixing approach. Based on the socket defect, either a type I or type III collagen membrane was used during the procedure. In all cases CBCT imaging was done prior to surgical implant placement, and digital implant planning was performed integrating interdisciplinary best practices. Implant placement was carried out using manufacturer's recommendations.

RESULTS

Five male and five female patients were included in the study, with one of the male patients having two teeth extracted for a total of 11 cases. The reasons for teeth extraction included fracture, endodontic failure, periodontal infection, and subgingival decay. Healing was uneventful after the ARP procedure for all patients. A minimum of 120 days elapsed between ARP and the surgical implant procedure. Complete radiographic bone fill was observed in the CBCT image for all extraction sites, and no additional bone augmentation was needed at the time of implant placement.

CONCLUSION

This case series demonstrates that based on clinical and radiographic outcomes, a combination of allogenic and xenogenic bone substitute can be utilized to obtain predictable results following ARP. Future randomized controlled trials that can compare different ratios between the two biomaterials are indicated to guide clinicians in the mixing protocols and their outcomes.

Clinical and radiographic assessment of cross-linked hyaluronic acid addition in demineralized bovine bone based alveolar ridge preservation: A human randomized split-mouth pilot study

PURPOSE

To investigate clinically and radiographically at 4 months post-operatively the outcomes of mixing demineralized bovine bone material (DBBM) with cross-linked hyaluronic acid in alveolar ridge preservation.

MATERIAL AND METHODS

Seven patients presenting bilateral hopeless teeth (14 teeth) were enrolled in the study, the test site contained demineralized bovine bone material (DBBM) mixed with cross-linked hyaluronic acid (xHyA) while the control site contained only DBBM. 4 months post-operatively prior to implant placement a Cone beam computed tomography (CBCT) scan was recorded and compared to the initial scan to assess the volumetric and linear bone resorption that occurred in both sites. Clinically, sites that needed further bone grafting at the implant placement stage were recorded. Differences in volumetric and linear bone resorption between both groups were assessed using Wilcoxon signed rank test. McNemar test was also used to evaluate difference in bone grafting need between both groups.

RESULTS

All sites healed uneventfully, volumetric and linear resorption differences between the baseline and 4 months post-operatively were obtained for each site. The mean volumetric and linear bone resorption were respectively 36.56 ± 1.69%, 1.42 ± 0.16 mm in the controls sites and 26.96 ± 1.83%; 0.73 ± 0.052 mm in the tests sites. The values were significantly higher among controls sites (P=0.018). No significant differences were observed in the need for bone grafting between both groups.

CONCLUSION

Cross-linked hyaluronic acid (xHyA) appears to limit the post-extractional alveolar bone resorption when mixed with DBBM.

Influence of age and gender on alveolar bone healing post tooth extraction in 129 Sv mice: a microtomographic, histological, and biochemical characterization

OBJECTIVES

To analyze the effect of biological sex and aging on craniofacial bone features in 129 Sv mice and their influence on dental socket healing post tooth extraction.

MATERIALS AND METHODS

A total of 52 129 Sv mice were used, of which 28 were young (3-4 months) and 24 were aged (17-18 months), equally distributed according to biological sex. After an upper right incisor extraction, mice specimens were collected at 7, 14, and 21-days post-surgery for microtomographic (microCT) and comprehensive histological analysis. Mandible, skull bones, and maxillae at 21 days were analyzed by microCT, while blood plasma samples were collected for the detection of key bone turnover markers (P1NP and CTX-1) by enzyme-linked immunosorbent (ELISA) assay.

RESULTS

Aged females depicted significantly decreased mineralized bone content in alveolar sockets in comparison to young females and aged males at day 7, and aged males at day 14. Mandible RCA and Ma.AR of aged females were also significantly decreased in comparison with young females. Histological evaluation revealed that all alveolar sockets healed at 21 days with inflammation resolution and deposition of new bone. Immunohistochemistry for TRAP revealed increased area density for osteoclasts in alveolar sockets of aged females when compared to young females at 21 days. While a significant increase in CTX-1 levels was detected in blood plasma of aged females when compared to young females, P1NP levels did not significantly change between young and older females. No significant changes were observed for males.

CONCLUSIONS

Age and gender can significantly affect craniofacial bones of 129 Sv mice, especially maxilla and mandible in females. Considering the altered bone resorption parameters and delayed alveolar bone healing in older females, careful deliberation is necessary during development of pre-clinical models for craniofacial research.

CLINICAL RELEVANCE

Aging can be a contributing factor to slower bone healing in craniofacial bones. However, there are no sufficient experimental studies that have addressed this phenomenon along with biological sex taken into consideration.

Digital workflow for image-guided immediate implant placement by using the socket-shield technique and custom abutment in the esthetic area

Marginal bone loss around immediately placed implants may compromise esthetic outcomes in the anterior maxilla. The relatively recent socket-shield technique of partial extraction therapy has been described as being useful to maintain the structure of peri-implant tissues. The present technique report introduced a digital workflow to perform image-guided implant placement after partial extraction therapy. In this technique, digital 3-dimensional images are used to plan and orient the flapless surgical procedure and to digitally design a custom abutment based on the natural emergence profile as segmented from the tooth to be extracted.

Alveolar ridge preservation in post-extraction sockets using concentrated growth factors: a split-mouth, randomized, controlled clinical trial

Aim

The aim of this clinical trial was to assess the impact of autologous concentrated growth factor (CGF) as a socket-filling material and its ridge preservation properties following the lower third molar extraction.

Materials and methods

A total of 60 sides of 30 participants who had completely symmetrical bilateral impacted lower third molars were enrolled. The primary outcome variables of the study were bone height and width, bone density, and socket surface area in the coronal section. Cone beam computed tomography images were obtained immediately after surgery and three months after surgery as a temporal measure. Follow-up data were compared to the baseline using paired and unpaired t-tests.

Results

CGF sites had higher values in height and width when compared to control sites (Buccal wall 32.9 ± 3.5 vs 29.4 ± 4.3 mm, Lingual wall 25.4 ± 3.5 vs 23.1 ± 4 mm, and Alveolar bone width 21.07 ± 1.55vs19.53 ± 1.90 mm, respectively). Bone density showed significantly higher values in CGF sites than in control sites (Coronal half 200 ± 127.3 vs -84.1 ± 121.3 and Apical half 406.5 ± 103 vs 64.2 ± 158.6, respectively). There was a significant difference between both sites in the reduction of the periodontal pockets.

Conclusion

CGF application following surgical extraction provides an easy, low-cost, and efficient option for alveolar ridge preservation. Thus, the use of CGF by dentists during dental extractions may be encouraged, particularly when alveolar ridge preservation is required.

Clinical trial registration

TCTR identification, TCTR20221028003.

Tomographic and Histologic Analysis of Different Socket Sealing Approaches for Alveolar Ridge Preservation: A Randomized Controlled Pilot Clinical Trial

Purpose: To compare different socket sealing approaches for alveolar ridge preservation and assess the dimensional changes and histologic characteristics of soft and hard tissues in a 4- to 6-month period. Material and Methods: A total of 22 patients with indicated single-tooth extraction in the maxillary nonmolar region were eligible for this study. After CBCT scanning and minimally traumatic tooth extraction, the alveolar sockets were filled with demineralized bovine bone mineral with collagen (DBBM-C) in patients from all groups except for those in the control group. Patients were divided into groups for socket sealing as follows: unsealed/spontaneous healing (control; n = 6), collagen matrix (n = 5), collagen membrane (n = 5), and autogenous graft (n = 6). A second CBCT scan was taken 4 to 6 months after extraction, and a trephine biopsy of soft and hard tissues was collected during implant placement. Tomographic dimensional changes were compared between groups. Intragroup tomographic evaluation and histological analysis were also performed. Results: Analysis of dimensional changes did not detect differences between the socket sealing groups (P > .05). In an intragroup evaluation, the height of the buccal bone and cross-sectional area of the alveolar ridge were significantly lower 4 to 6 months after extraction for the control group (P = .031). Histological analysis revealed that the socket sealing approach had no impact on hard and soft tissue formation. Conclusion: The data from the present study suggest that socket sealing with a collagen matrix, a collagen membrane exposed to the oral cavity, or an autogenous punch graft had no difference in the effects on volumetric maintenance and tissue formation in a period of 4 to 6 months.

Immediate implant positioning using tooth-derived bone substitute material for alveolar ridge preservation: Preliminary results at 6 months

OBJECTIVES

In the present study we evaluated the effectiveness of the use of a novel autologous bone substitute derived directly from processing the extracted tooth in the upper premolar area to preserve a suitable esthetic score and functionality.

MATERIAL AND METHODS

Fourteen bone-level implants with platform switching were inserted in 12 patients immediately after atraumatic extraction of premolars for restorative or endodontic reasons. The implant buccal bone gap was filled using autologous tooth extracted-derived material. Clinical and radiographic parameters, including Pink Esthetic Score (PES) were evaluated at 6 months.

RESULTS

A total of 10 patients accounting for 11 implants were included. PES showed a suitable esthetic result, and all the implant-prosthetic rehabilitation reported full satisfaction for masticatory function, phonetics, and aesthetics. Bone levels were stable and not affected by implant location, lesion type, or bone quality.

CONCLUSION

Radiographically the autologous bone substitute used appears stable in the surgical site and there is good continuity between the autologous bone and the graft. No adverse effects such as periodontal inflammation, infection, or graft rejection was reported.

Radiographic evaluation of a bone substitute material in alveolar ridge preservation for maxillary removable immediate dentures: A randomized controlled trial

STATEMENT OF PROBLEM

Maxillary bone resorption after multiple extractions can jeopardize the success of an immediate denture, but whether bone volume preservation techniques are effective is unclear.

PURPOSE

The purpose of this randomized controlled trial was to evaluate the efficacy of socket grafting with a xenogenic bone substitute in participants receiving maxillary immediate removable complete dentures in terms of bone volume preservation (height and width of the bone ridge).

MATERIAL AND METHODS

The study was a single-blinded, randomized controlled clinical trial with 2 balanced parallel arms. Thirty-six participants who had Kennedy Class I edentulous posterior areas bilaterally for at least 3 months and required maxillary immediate removable complete dentures were enrolled. Duplicates of the removable complete denture were made and converted into radiographic and surgical guides. Participants allocated to the test group received deproteinized bovine bone mineral blended with 10% porcine collagen (DBBM-C) in the extraction sockets, and participants in the control group received no grafting material. With a radiographic guide in place, cone beam computed tomography scans were made 10 days after tooth extraction, when the immediate removable complete denture was delivered (D10, baseline), after 3 months (D90), and after 1 year (D365). The scans were superimposed, and measurements were made on the cross-sectional plane of each extraction site. The influence of various prognosis factors associated with bone volume preservation, including the location of tooth extraction, smoking habits, periodontal disease, and operator team, were analyzed.

RESULTS

Of 36 participants, 3 were lost to follow-up. The mean ±standard deviation loss of height of the buccal crest was 1.2 ±1.8 mm in the control group and 0.3 ±1.2 mm in the test group after 3 months of healing (P<.001) and 2.1 ±2.0 mm in the control group and 0.7 ±1.4 mm in the test group after 1 year of follow-up (P<.001). Mean ±standard deviation horizontal ridge width change was 1.3 ±1.4 mm in the control group and 0.5 ±0.8 mm in the test group after 3 months (P<.001) and 2.2 ±1.4 mm in the control group and 0.9 ±1.1 mm in the test group after 1 year of follow-up (P<.001). None of the other prognostic factors had a significant effect at either time period.

CONCLUSIONS

Grafting DBBM-C into the extraction socket after removing anterior teeth for immediate removable denture therapy resulted in significantly less vertical buccal crest and horizontal ridge resorption as compared with spontaneous socket healing after 1 year of follow-up. This procedure may be useful for preserving bone, especially when a fixed implant-supported prosthesis is planned.

Clinical and Radiologic Evaluation of a Fully Tapered Implant with Immediate Placement in the Esthetic Zone: A Prospective Case Series Study

A fully tapered implant was recently introduced to increase primary stability and to be used in challenging situations. Twenty single implants were inserted in maxillary postextraction sockets, from premolar to premolar, and immediately restored. Marginal bone level (MBL) and probing depth (PD) were evaluated over a 12-month follow-up period. All implants osseointegrated, achieving a success rate of 100%. The difference in MBL between implant placement and 1 year later was 0.20 ± 0.04 mm, while PD was 2.82 ± 0.51 mm at 1 year. The data reported here support the use of a fully tapered implant for immediate placement and immediate provisionalization for single-tooth replacements in the esthetic area.

Bone and Soft Tissue Modifications in Immediate Implants Versus Delayed Implants Inserted Following Alveolar Ridge Preservation: A Randomized Controlled Clinical Trial. Part II: Radiographic Outcomes

This study evaluated the radiographic alterations that occur in immediate postextraction implants and in delayed implants inserted in a preserved ridge. In group A, an implant was placed immediately after tooth extraction, grafting the bone-to-implant gap. In group B, alveolar ridge preservation was performed after tooth extraction, and delayed implant placement was performed 4 months later. The final follow-up was 1 year after prosthetic loading in both groups. The marginal bone level (MBL) was measured at implant insertion (T1), at loading (T2), and at the final follow-up, 12 months after prosthetic loading (T3). At tooth extraction (T0) and T3, the horizontal ridge width (HW) was measured on CBCT scans at three different levels. No statistically significant differences in MBL or HW were found between the two study groups. The outcomes suggest that it is possible to maintain MBL and alveolar bone volumes regardless of whether the procedure is performed through immediate postextraction implant placement or through delayed implant placement in a preserved ridge.

Dimensional Alterations Following Immediate Implant Placement Using the Socket-Shield Technique in the Anterior Maxilla: A Case Series

Tissue volume loss after tooth extraction is an esthetic challenge. The socket-shield technique (SST) has been used to compensate it with promising results but limited evidence. This prospective study aims to present the dimensional changes after SST. Ten consecutive patients with an anterior hopeless tooth to be extracted and an immediate implant placed using the SST were prospectively enrolled. An impression and a CBCT scan were taken prior to surgery and 6 months later. Models were scanned, and DICOM and STL (standard tessellation language) files were superimposed and analyzed by software to measure the dimensional differences. Five patients could be evaluated for bone alterations and 9 for soft tissue alterations. The mean horizontal shrinkage of the buccal bone plate at 1 mm from the most coronal part was -0.22 ± 0.13 mm in the CBCT analysis. The mean volume loss in the region of interest was -2.94 ± 2.45 mm³, with a mean change in soft tissue contours of -0.49 ± 0.41 mm between pre- and postoperative analysis. SST limited the buccal contour loss after tooth extraction and may be considered a potential option to prevent volume loss in immediate implant placement. Further standardization in the digital measurement method is still needed.

Assessment of a Novel Alveolar Ridge Preservation Concept in Dehiscence Sockets: A Pilot Study

In this prospective pilot study on ridge preservation (RP), a collagen sponge was placed to fill the bottom half of the socket, followed by a sequence of bone graft, collagen membrane, and a sponge placed on top. Twelve patients with 13 hopeless posterior teeth were included. Changes in bone dimension (including variations of horizontal ridge width [HRW] and bone height [BH]) between the time immediately postextraction (T₀) and 6 months later (T_6M) were evaluated through CBCT. The soft tissue was assessed using a wound healing index (WHI) at 2 weeks (T_2W), 2 months (T_2M), and 6 months (T_6M) postsurgery. Measured at three parallel levels (1, 3, and 5 mm apical to the crest of the palatal plate), the mean HRW changes (T₀ to T_6M) ranged from 0.47 to 1.05 mm. Statistically significant negative correlations were observed between WHI (T_6M) and midcrestal BH change. This proposed RP technique showed favorable outcomes regarding HRW and BH, even in periodontally compromised dehiscence sockets.

Evaluation of Contour Augmentation in Immediate Single-Tooth Implants With and Without Flaps in the Anterior Maxilla: A 1-Year Prospective Study

This prospective clinical study involved 20 patients in whom implants were immediately placed in extraction sockets. Residual bone defects were grafted, and the buccal bone plate was overcontoured with a xenogeneic bone substitute and covered by a collagen membrane. One year after implant placement, CBCT images were acquired to evaluate buccal bone, and implant stability was analyzed through resonance frequency analysis. Results showed that buccal bone covered the rough surface of all implants 1 year after implantation. Hard tissues responded more favorably in the flapless group. No correlation was found between initial bone defects and bone dimensions in the follow-up exam.

Comparative Evaluation of Bone Dimensional Changes in Extraction Sockets Preserved With Calcium Phosphosilicate Bone Substitutes With and Without Platelet-Rich Fibrin: A Randomized Controlled Clinical Trial

This study aimed to evaluate the bone dimensional changes associated with extraction sockets preserved with calcium phosphosilicate (CPS) morsels and platelet-rich fibrin (PRF) at 6 months posthealing. Thirty fresh extraction sockets were randomly allocated to one of the following groups and grafted using PRF: Control (n = 10), CPS morsels (Test I; n = 10), or CPS+PRF (Test II; n = 10). All sites were sealed with PRF as a socket seal. CBCT scans were taken at 1 week postsurgery and at 6 months posthealing. The intergroup comparison showed a statistically significant difference in mean horizontal bone dimensional changes, and no such significance was observed for vertical bone changes. Bone density measured using Hounsfield units (HU) fell within the range of 350 to 850 HU (D3 bone quality) at 6 months posthealing for all three groups. Within the limitations of this study, socket preservation using CPS morsels with and without PRF demonstrated more favorable conditions for future implant placement.

[Influencing Hard and Soft Tissue Changes Following Tooth Extraction]

Influencing Hard and Soft Tissue Changes Following Tooth Extraction Abstract. Influencing Hard and Soft Tissue Changes Following Tooth Extraction The loss of a tooth leads to the initiation of resorption processes and thus to the remodeling of the tissues of the alveolar process. At the hard tissue level, this resorption mainly affects the bundle bone at the buccal side of the extracted tooth and occurs most rapidly in the first weeks and months after extraction. Tissue changes occur not only at the level of the hard tissue (bone), but also at the level of the soft tissue. These changes lead to a significant loss of volume, especially at the buccal area of the alveolar ridge. They are responsible for a volume loss of the alveolar ridge contour of up to 50 %.

Three-Punch Alveolar Ridge Reconstruction Technique: A Novel Flapless Approach in Eight Consecutive Cases

This clinical and histologic case series aims to evaluate a novel flapless approach to alveolar ridge reconstruction (ARR) of compromised extraction sockets by means of collagenated xenograft sealed with three resorbable layers of hole-punched membrane. Eight postextraction sockets without buccal and/or palatal bone walls and with adjacent natural teeth from eight consecutive patients were included. Pretreatment CBCT scanning was performed. After debridement of the selected sites, a flapless grafting procedure was carried out, and the three-membrane protection was applied. After 6 to 17 months, at implant placement, a posttreatment alveolar ridge CBCT was taken, and a bone core biopsy sample was harvested for histologic and morphometric analyses. Clinical outcomes showed predictable horizontal bone regeneration in all postextraction sockets with good preservation of soft tissue architecture. Pretreatment ridge CBCT measurements showed limited bone width (2.6 ± 1.08 mm). Posttreatment measurements revealed adequate bone width (9.05 ± 1.29 mm) with a mean bone gain of 6.4 ± 1.34 mm. Histologic and morphometric analyses revealed the absence of inflammatory cells and the presence of 25.4% ± 8.7% of new bone and 31.8% ± 8.3% of graft particles inside the biopsy samples. Many graft particles were surrounded and interconnected by new bone, thus demonstrating the formation of a bone-graft network. Rare osteoclasts were found. This novel technique seems to be effective in treating alveolar sockets prior to implant placement, preventing inflammation and bone resorption and promoting bone regeneration.

The effect of different soft-tissue management techniques for alveolar ridge preservation: a randomized controlled clinical trial

PURPOSE

For alveolar ridge preservation, various treatment protocols have been described. While most studies focus on the effect of the bone graft material, the aim of this study was to analyze the influence of different soft-tissue management techniques on the soft and hard tissue.

METHODS

A total of 20 maxillary extraction sockets were grafted with an anorganic xenogenic bone graft and then randomly treated with either a combined epithelialized-subepithelial connective tissue graft (CECG) or a porcine collagen matrix (CM) placed in labial and palatal tunnels. Measurements of soft-tissue thickness were performed at tooth extraction (T0), implant insertion (T1) and second stage surgery (T2).

RESULTS

In the CECG group, gingival thickness was 1.18 ± 0.56 mm (T0), 1.29 ± 0.26 mm (T1) and 1.2 ± 0.32 mm (T3). In the CM group, the measurements were 1.24 ± 0.50 mm (T0), 1.6 ± 0.6 mm (T1) and 1.7 ± 1.06 mm. Thus, there was an overall increase in gingival thickness from T0 to T2 of 0.02 ± 0.66 mm (CECG) compared to 0.46 ± 0.89 mm (CM). The thickness of keratinized soft-tissue was 3.91 ± 1.11 mm (CECG) and 4.76 ± 1.48 mm (CM) before extraction and 3.93 ± 1.17 mm (CECG) and 4.22 mm ± 1.26 mm (CM) at implant follow-up. Mean peri-implant probing depths were 3.15 ± 1.39 mm (CECG) and 3.41 ± 0.99 mm (CM).

CONCLUSIONS

After ridge preservation, comparable soft-tissue parameters were observed in both groups, whether treated with a collagen matrix or a combined autologous connective tissue graft.

Comparison of Bone Levels Around Immediately Loaded Single Implants Placed in Healed or Freshly Extracted Sites in the Esthetic Anterior Maxilla: A 10-Year Prospective Study

PURPOSE

To evaluate retrospectively at 10 years the marginal bone levels around implants located in healed ridges or in extraction sockets and loaded immediately with provisional crowns fixed in prefabricated abutments.

MATERIALS AND METHODS

Forty-two implants were placed in 36 patients needing single tooth replacement. Implants were inserted either in healed ridges (group 1) or in extraction sockets (group 2) and loaded immediately with prefabricated abutments. Two implants were lost during the healing period from group 2. The bone level around the implant shoulder was calculated mesially and distally on each implant using intraoral radiographs after crown cementation and 1, 3, 5, and 10 years following loading.

RESULTS

On the 10-year follow-up report, 36 implants were available for the clinical and radiologic evaluation. Besides the two implants lost during the osseointegration period, no implant loss was documented over the 5- to 10-year observation period. The average bone loss after implant and crown cementation was 0.266 ± 0.176 mm for 1 year, 0.194 ± 0.172 mm for 5 years, and 0.198 ± 0.165 mm for 10 years in healed ridges and 0.267 ± 0.161 mm for 1 year, 0.213 ± 0.185 mm for 5 years, and 0.287 ± 0.194 mm for 10 years in extraction sockets. Three crowns (in group 1) and one crown (in group 2) were replaced for esthetic reasons.

CONCLUSION

The outcome of this study revealed that in both groups, the responses of marginal bone were similar. Immediate placement of the definitive prefabricated abutment in an immediate loading protocol appears to conserve marginal bone around the implant neck.

Buccal Bone Remodeling Around Immediate Implants in STZ-Induced Diabetic Dogs: A Histologic and Microcomputed Tomographic Analysis

Buccal bone remodeling around immediate implants placed in animals with streptozotocin (STZ)-induced diabetes has not been investigated. The present histologic and microcomputed tomography (μCT) in vivo experiment assessed the buccal bone remodeling around immediate implants, extraction socket healing, and bone-to-implant contact (BIC) in dogs with and without STZ-induced diabetes. Three male beagle dogs with STZ-induced diabetes and three healthy dogs (controls) were included. Fasting blood glucose levels were measured using a glucometer. Under general anesthesia, all animals underwent atraumatic tooth extraction of bilateral maxillary and mandibular second premolar teeth using Piezosurgery and immediate implant placement in the distal root socket. Primary closure was achieved for all implants and adjacent socket sites. After 11 months, all animals were sacrificed, and buccal bone thickness (BBT), marginal bone loss (MBL), BIC, and mesial extraction socket bone volume were assessed in control and diabetic animals using histologic and μCT examination. High-resolution μCT analyses were performed to identify the percentage of osteocytes and blood vessels in bone specimens harvested from a mesial extraction socket in each group. BBT and BIC were significantly higher in control dogs (P < .05), and diabetic dogs demonstrated significantly more MBL than control dogs (P < .05). Compared to healthy subjects, the sockets of induced diabetic dogs lost over 50% of bone horizontally and vertically. Control group had more significant osteocytes (38.85%) and blood vessels (37.87%), whereas the same values for STZ-induced diabetic dogs were 27.92% and 27.76%, respectively. Buccal bone loss and MBL were significantly higher around immediate implants placed in dogs with STZ-induced diabetes and were associated with multiple implant buccal thread exposure. A large percentage of socket space in diabetic dogs healed with nonosseous structure following tooth extraction.

Vestibular socket therapy with immediate implant placement for managing compromised fresh extraction sockets: A prospective single-arm clinical study

PURPOSE

To assess hard and soft tissues regenerated around immediate implants placed in compromised fresh extraction sockets using vestibular socket therapy 2 years postoperatively.

MATERIALS AND METHODS

Twenty-seven compromised fresh extraction sockets were managed using vestibular socket therapy and immediate implant placement. After immediate implant placement, a cortical bone shield was stabilised through a vestibular incision. The socket defect was filled with particulate bone graft. Labial plate thickness and bone height were evaluated 1 and 2 years postoperatively using CBCT. The pink aesthetic score and probing depth were recorded after 6 months, 1 year and 2 years. A Friedman test was used to study changes in the reported outcomes over time, with the level of statistical significance set at P ≤ 0.05.

RESULTS

All implants recorded a 100.0% survival rate. A statistically significant increase in bone height (0.93 mm, P = 0.004) and apical (0.12 mm, P = 0.026), midfacial (1.26 mm, P < 0.001) and crestal (0.86 mm, P < 0.001) bone thickness was observed after 2 years. The changes in pink aesthetic score and probing depth were not significant: the pink aesthetic score was 12.48 ± 1.45 and the mean PD was 2.37 ± 0.79 mm mesially, 2.11 ± 0.70 mm facially, 2.07 ± 1.04 mm distally and 1.00 ± 0.00 mm palatally after 2 years.

CONCLUSION

Combining immediate implant placement with vestibular socket therapy to manage compromised fresh extraction sockets offers promising radiographic, aesthetic and periodontal results while minimising the treatment time and number of surgical procedures required.

Outcomes of a 1-Year Prospective Single-Arm Cohort Study Using a Novel Macro-Hybrid Implant Design in Extraction Sockets: Part 1

A novel macro-hybrid implant design was introduced to afford high apical primary stability and more coronal space to preserve the circumferential extraction socket architecture. This study presents 1-year data from a prospective single-arm cohort study. The data was distilled based on the following criteria: (1) single-tooth immediate tooth replacement therapy (ITRT) in the maxillary anterior and premolar regions in intact (Type 1) extraction sockets that were (2) treated with the dual-zone grafting technique. The clinical and radiographic outcomes of 48 ITRT implants were evaluated. The mean ± SD labial plate dimension changes were 0.33 ± 0.41 mm at the implant abutment interface (L1) and 0.34 ± 0.40 mm at 5.0 mm below (L2). The mean labial plate dimension (thickness) at the 1-year recall was 2.27 ± 0.88 mm (L1) and 1.95 ± 0.95 mm (L2). At ITRT, the ridge contour at the free gingival margin and 3.0 mm below it were 7.54 ± 0.93 mm and 9.44 ± 2.36 mm, respectively; after final restoration delivery, the corresponding values were 7.45 ± 0.95 mm and 10.23 ± 2.30 mm, respectively. The peri-implant soft tissue thickness (PISTT) at the time of implant-level impression-making was 3.29 ± 0.73 mm, with an average Pink Esthetic Score of 12.79. A macro-hybrid implant design showed high levels of primary stability (~60 Ncm), stable ridge contour at 1 year, a labial plate dimension between 1.5 and 2.0 mm, and PISTT > 3.0 mm, which may be a critical factor in providing stable, long-term esthetic outcomes.

Malnutrition delayed wound healing after tooth extraction by HMGB1-related prolonged inflammation

Malnutrition causes prolonged inflammation, resulting in delayed wound healing. High mobility group box-1 (HMGB1) is a damage-associated molecular pattern that is present in the nuclei of macrophages and is secreted into the extracellular milieu in response to stimuli. It stimulates the production of interleukin-1β (IL-1β) through the receptors for advanced glycation end products (RAGE), inducing an inflammatory response, which is an essential response to initiate wound healing. We hypothesized that malnutrition may interfere with this cascade, causing abnormal inflammation and ultimately delaying wound healing. We used tooth-extracted mice with malnutrition fed with low-casein diet for two weeks. On days 3 and 7 after tooth extraction, the wound tissue was histologically observed and analyzed for several factors in the inflammation-regeneration lineage, including IL-1β, mesenchymal stem cells, myeloperoxidase activity, HMGB1, macrophage polarization, and adenosine 5-triphosphate (ATP). On day 7, delayed wound healing was observed with the following findings under malnutrition conditions: decreased mRNA expression of genes for regeneration and mesenchymal stem cell (MSC) accumulation, an obvious increase in myeloperoxidase and IL-1β mRNA expression, an increase in HMGB1 levels, and an increase in ATP concentration in tissues with elevated proportion of M2 macrophages. These results suggest that the significantly increased secretion of HMGB1 associated with the upregulated production of ATP and IL-1β secretion via the RAGE pathway may interfere with the resolution of inflammation and wound healing under the state of malnutrition.

Mineralized Plasmatic Matrix in Ridge Preservation: A Randomized Controlled Clinical Trial

Clinical evidence suggests using lateral and vertical ridge preservation procedures to make dental implant placement possible. This study evaluates and compares the radiographic and volumetric changes following ridge preservation procedures using either mineralized plasmatic matrix grafts (MPM) or bone grafts alone (non-MPM) in the existing crestal ridges of sockets in maxillary and mandibular regions using CBCT scans. Healthy volunteers (n = 26) were recruited and randomized into MPM and non-MPM groups (n = 13 patients per group). Ridge preservation (RP) was performed in sockets after extraction. Preoperative baseline vertical measurements (V1) were made from the existing highest level of the socket crestal ridges to a reference point in an apicocoronal direction. Similarly, baseline horizontal measurements (H1) were made in a buccolingual direction on CBCT scans. The measurements were repeated after 3 months (V2 and H2) and 6 months (V3 and H3) using the same reference points. Difference between V3 and V1 as well as H3 and H1 was used to assess the gains in height and width of the sockets after RP. No significant difference was found in the initial baseline V1 and H1 values in MPM and non-MPM groups. Median (Mdn) V2 and H2 scores were significantly different between MPM (Mdn = 18.91) and non-MPM groups (Mdn = 27.81) after 3 months of RP (U = 37, z = -6.302, P < .001.) However, after 6 months of treatment, V3 and H3 scores were significantly different between the MPM (Mdn = 27.19) and the non-MPM group (Mdn = 37.81). MPM can be used as a valuable and predictable technique in obtaining bone fill in the maxillary and mandibular sockets with residual crestal ridges deemed necessary for RP in implant therapy.

Evaluation of a Minimally Invasive Alveolar Ridge Reconstruction Approach in Postextraction Dehiscence Defects: A Case Series

This study evaluated a panel of clinical, dimensional, volumetric, implant-related, histomorphometric, and patient-reported outcome measures (PROMs) following reconstruction of dehiscence defects in extraction sockets with a minimally invasive technique using particulate bone allograft and a nonresorbable dense polytetrafluoroethylene (dPTFE) membrane. Subjects (n = 17) presenting severe buccal dehiscence defects at the time of single-rooted tooth extraction participated in the study. The mean vertical dimension of the dehiscence defects at baseline was 5.76 ± 4.23 mm. Subjects were followed up at 1, 2, 5, and 20 weeks postoperatively. The dPTFE barrier was gently removed at 5 weeks. CBCT and intraoral scans were obtained at baseline and at 20 weeks. A bone core biopsy sample was harvested at 24 weeks (before implant placement). Linear radiographic measurements revealed a mean increase in buccal bone height from baseline to 20 weeks (5.66 ± 5.1 mm; P < .0001). A total alveolar bone volume gain of 9.12% was observed. Although approximately half of the sites required some degree of additional bone augmentation at the time of implant placement, all implants were placed in a favorable restorative position with adequate primary stability. Histomorphometric analyses revealed a mean mineralized tissue area of 31.04% ± 15.22%, and the proportions of remaining allograft material and nonmineralized tissue were 16.23% ± 10.63% and 52.71% ± 9.53%, respectively. All implants survived up to 12 months after placement. PROMs were compatible with minimal discomfort at different postoperative stages and a high level of overall satisfaction upon study completion. This study demonstrated that the reconstructive procedure employed was successful and predictable in treating large, postextraction alveolar ridge deformities to optimize tooth replacement therapy with implant-supported prostheses.

Influence of PRGF and PRF on postextractive alveolus regeneration: a randomised controlled trial

OBJECTIVES

Healing of postextraction alveolus is a complex process that involves soft and hard tissue regeneration. Pain, swelling, difficulty in opening the mouth, delayed bone tissue healing, alveolitis, and horizontal or vertical resorption of bone tissue are the main problems that impact on consequent treatment. Blood concentrates PRGF (plasma rich in growth factors) and PRF (platelet-rich fibrin), which are rich in growth factors, create better conditions for postextraction alveolus healing, enhance quality of soft tissues and bone regeneration, and decrease pain. The study objective was to compare physiologic healing of the postextraction zone with PRF- and PRGF-induced changes.

METHOD AND MATERIALS

In total, 43 patients were randomly divided into three groups: control group (mandibular molar extraction and filling of postextraction alveolus with hemostatic sponge containing gentamicin), group 2 (postextraction alveolus filled with PRGF), and group 3 (postextraction alveolus filled with PRF). Bone regeneration was evaluated in CBCT scans after 1 month. Pain was evaluated using the visual analog scale (VAS).

RESULTS

After evaluating VAS results 1 day after surgery the lowest pain score was in the PRGF group. Tooth alveolus vertical and diagonal dimensions in the control group were significantly (P = .017) smaller than in the PRGF group. The vertical dimension of the alveolar ridge did not change significantly (P = .859) in the PRGF group; however, it was significantly reduced (P = .04) in the PRF group. One month after surgery the age of the control group was inversely proportionally correlated with the height and diagonal dimension of callus.

CONCLUSION

Both blood concentrates had great anti-inflammatory properties, but PRGF had better osteoblastic properties and resulted in lower postoperative pain.

Effectiveness of Autologous Tissue Grafts on Soft Tissue Ingrowth in Patients Following Partial Root Extraction with Socket Shield: A Retrospective Analysis of a Case Series

PURPOSE

There is little knowledge about healing patterns for the socket with an intentionally retained root fragment: a socket shield. The clinical observation is soft tissue ingrowth next to the socket shield. The aim of this study was to evaluate the effectiveness of autologous grafting matrices in preventing soft tissue ingrowth.

MATERIALS AND METHODS

Patient data from a private clinic were searched for sockets with a socket shield left to heal with blood clot or grafted with autologous materials: autologous platelet-rich fibrin (PRF), scraped particulate bone, cortical tuberosity bone plate, or particulate dentin and covered with PRF membranes. The included sites were exposed by the flap 4 months after the first surgery, and soft tissue ingrowth depth and width next to the root fragment were measured by a scaled probe and documented.

RESULTS

Evaluation of 34 sites showed the greatest depth of soft tissue ingrowth in the nongrafted sockets (6.0 ± 0.0 mm). Grafting with PRF plugs (depth of 2.3 ± 0.2 mm) or particulate bone (depth of 2.7 ± 0.6 mm) decreased soft tissue ingrowth. Grafting with particulate dentin or cortical tuberosity bone plate resulted in a soft tissue ingrowth depth of only 1 mm, yielding the best clinical outcome. Radiography confirmed those findings.

CONCLUSION

Autologous dentin particulate or tuberosity cortical bone plate is most effective for preventing soft tissue ingrowth.

Use of a Novel Implant with an Inverted Body-Shift and Prosthetic Angle Correction Design for Immediate Tooth Replacement in the Esthetic Zone: A Clinical Case Series

A clinical case series of three patients is presented using a novel implant design to not only address primary stability but also to prevent damage to the labial bone plate and improve the interdental space for papillae preservation with immediate tooth replacement therapy. This unique implant design features an apicocoronal inverted body-shift in diameter (wide to narrow), shape (tapered to cylindrical), thread depth (deep to shallow), and thread pattern (V-shaped to square) to achieve uncompromised primary stability and esthetics, particularly in extraction sockets, in a singular body form. In addition, the implant possesses a prosthetic angle correction within the implant body to facilitate screw-retention of the restoration and avoid the risk of apical socket perforation.

A Clinical Classification System for the Treatment of Postextraction Sites

A postextraction socket is always open to different treatment possibilities. A straightforward clinical classification may help evaluate which surgical approach is best suited for the case being treated. Four different classes are defined on the basis of the local anatomy of the site, available bone volume, and soft tissue level. For every clinical situation, either immediate placement, early placement, alveolar ridge preservation, or staged approach can be selected as a treatment modality according to the classifications listed.

Alveolar Ridge Preservation in the Esthetic Maxillary Zone: Tuberosity Punch Technique of Gingiva and Bone: A Pilot Study

AIM

This paper aims to present an alveolar ridge preservation technique, using an autologous punch formed of hard and soft tissues harvested from the tuberosity area.

MATERIALS AND METHODS

Ten residual sockets in the anterior maxilla were filled with a punch of hard and soft tissues harvested from the tuberosity area. Clinical and radiographical data were collected at the surgical extraction time 0 (T0) and 5 months during implant placement (T1), from clinical and radiological measurements using cone-beam computed tomography scans and periapical radiographs. Core biopsy was harvested during implant placement for histological and histomorphometrical analysis.

RESULTS

Clinically, the alveolar ridge presented a mean width of 10.3 mm before extraction which decreased to 8.85 mm at T1, where the mean horizontal loss is 1.45 mm (standard deviation [SD] 1.03 mm). The initial ridge mean height was 11.25 mm and increased to 12.85 mm after 5 months, where the mean vertical gain is 1.6 mm (SD 0.65 mm). The radiological evaluation shows a reduction in the horizontal dimension with a mean of 1 mm; however, the sockets show stability in the vertical dimensions. Histology showed a new lamellar bone formation with some areas of woven bone. Histomorphometric analysis showed that the percentage of new bone formed was 42.44 ± 5.54% and 48.62 ± 8.66% of the connective tissue and 8.94 ± 5.28% of the residual autogenous bone.

CONCLUSION

At T1, the extraction sockets showed significantly lower vertical and horizontal bone changes, compared to T0. The described preservation punch technique resulted in greater stability in the horizontal and vertical dimensions after 5 months.

CLINICAL SIGNIFICANCE

Clinical and radiological results show that the punch of hard and soft tissue graft reduces hard and soft tissue dimensional alteration after tooth extraction. In addition, using autogenous bone showed histological new bone formation.

Is ridge preservation effective in the extraction sockets of periodontally compromised teeth? A randomized controlled trial

OBJECTIVE

To verify whether ridge preservation is effective in the reduction of dimensional loss and in bone formation compared to spontaneous healing in extraction sockets of periodontally compromised teeth.

METHODS

Twenty-six subjects requiring tooth extraction for stage III/IV periodontitis were randomly assigned to one of two interventions: alveolar ridge preservation using collagenated bovine bone mineral and a resorbable collagen membrane (test, RP) or spontaneous healing (control, SH). Six months later, postoperative cone-beam computed tomography (CBCT) was performed to measure the linear and volumetric changes of the sockets compared to baseline scans. Biopsies were retrieved at the implant site for histomorphometric calculations. Nonparametric tests were applied for statistical analysis.

RESULTS

Significantly less shrinkage occurred in RP compared to SH, mainly in the crestal zone. The width loss difference between groups was 3.3 mm and 2.2 mm at 1 mm and 3 mm below the crest, respectively (p < .05). RP yielded a gain in socket height of 0.25 mm, whereas a loss of -0.39 mm was observed in SH (p < .05). The percentage of volume loss recorded in RP was also less than that recorded in SH (-26.53% vs -50.34, p < .05). Significantly less bone proportion was detected in biopsies from RP (30.1%) compared with SH (53.9%). A positive association between baseline bone loss and ridge shrinkage was found in SH but not in RP.

CONCLUSION

Ridge preservation in extraction sockets of periodontally compromised teeth was effective in reducing the amount of ridge resorption.

Vestibular Socket Therapy: A Novel Approach for Implant Placement in Defective Fresh Extraction Sockets With or Without Active Socket Infection (One-Arm Cohort Study)

PURPOSE

This study aimed to assess the radiographic, esthetic, and periodontal outcomes after 1 year of implant placement in compromised fresh extraction sockets in the esthetic zone using vestibular socket therapy.

MATERIALS AND METHODS

Implants were placed in type 2 sockets using vestibular socket therapy, which includes immediate implant placement, vestibular incision, and cortical bone shield stabilization, along with filling the socket gap with particulate bone graft, then sealing the socket orifice with a customized healing abutment in one visit. A 6-day protocol of antimicrobial therapy for treating sockets with active infection was also described. Assessment included measuring bone height and labial plate thickness at three levels at baseline and after 1 year, in addition to pink esthetic score and periodontal parameters (modified sulcus Bleeding Index and peri-implant probing depth) after 1 year. SPSS was used to calculate descriptive statistics of outcome measures.

RESULTS

All 16 implants used in the study showed success. There was a significant increase of bone height and bone thickness at the middle and crestal thirds (mean [SD] gain = 6.08 [3.07], 1.65 [0.91], and 1.18 [1.51]). The mean (SD) pink esthetic score was 12.63 (1.71), the mean (SD) modified sulcus Bleeding Index was 1.19 (0.40), and the mean (SD) peri-implant probing depth was 1.97 (0.46) mm.

CONCLUSION

Vestibular socket therapy was successfully used in compromised sockets with optimum radiographic, esthetic, and periodontal outcomes in addition to minimizing treatment time and number of surgical interventions. The 6-day protocol was able to eliminate infection and prepare sockets for implant placement.

The effect of immediate implant placement on alveolar ridge preservation compared to spontaneous healing after tooth extraction: Soft tissue findings from a randomized controlled clinical trial

AIM

To compare soft tissue dimensional changes and relative differences in soft and hard tissue volumes 4 months after single-tooth extraction and three different treatment modalities: spontaneous healing (SH) and alveolar ridge preservation by means of a deproteinized bovine bone mineral and a collagen matrix, with (IMPL/DBBM/CM) or without (DBBM/CM) immediate implant placement.

MATERIALS AND METHODS

STL files from study casts obtained at baseline and after 4 months were matched to calculate buccal soft tissue linear and volumetric changes. DICOM files from CBCTs were superimposed to STL files allowing the evaluation of soft tissue thickness at baseline and 4 months.

RESULTS

Mean horizontal reduction accounted for 1.46 ± 0.20 (SH), 0.85 ± 0.38 (DBBM-CM) and 0.84 ± 0.30 IMPL/DBBM-CM, with no statistical differences. Soft tissue thickness had a significant mean increase of 0.95 for SH group, compared to a non-significant mean decrease for DBBM-CM (0.20) and IMPL/DBBM-CM groups (0.07).

CONCLUSION

A preservation technique with DBBM-CM, with or without immediate implant placement, did not reduce the horizontal linear and volumetric changes at the buccal soft tissue profile significantly at 4 months after tooth extraction when compared to spontaneous healing. This is due to a significant increase in soft tissue thickness in spontaneously healing sites.

Leukocyte and Platelet-Rich Fibrin Have Same Effect as Blood Clot in the 3-Dimensional Alveolar Ridge Preservation. A Split-Mouth Randomized Clinical Trial

PURPOSE

Leukocyte- and platelet-rich fibrin (L-PRF) has been used for alveolar ridge preservation (ARP) in postextraction tooth sockets. However, current reports have measured its effectiveness in linear measurements of 3-dimensional ridge preservation. The purpose of this study was to determine the effectiveness of the use of L-PRF filling versus natural clot blood healing in ARP according to the clinical, radiographic, and volumetric measurements of postextraction tooth sockets.

MATERIALS AND METHODS

A split-mouth randomized clinical trial was designed. Healthy patients who needed bilateral extraction of upper third molars were selected. After the tooth extraction, the socket was filled and distributed randomly with L-PRF and the contralateral socket only with the blood clot. The dimensional change of soft tissue healing around the sockets, and the length, depth, and difference of bone formation were examined using standardized periapical radiographs. Volumetric measurement variation of the sockets was evaluated by 3-dimensional scanning of dental casts. Changes of all measures were analyzed at 7 days (initial) and 3 months (final) after the tooth extraction and compared between both groups (t test; P < .05).

RESULTS

Sixteen patients (aged 24.75 ± 3.53 years; 56.25% women) participated. Measurements of wound healing and the length, depth, and difference of bone formation were similar for both study groups at initial and final times. The calculation of initial-final volumetric socket variation was 15.45 ± 13.12 μL using L-PRF and 14.12 ± 11.23 μL using blood clot (P = .78).

CONCLUSIONS

L-PRF filling showed the same dimensional and volumetric behavior as normal blood clot healing in the ARP of postextraction tooth sockets. Future investigations will have to analyze the use of surgical models and digital instruments in ARP techniques.

Immediate versus delayed loading of post-extraction implants in the aesthetic zone: a prospective longitudinal study with 4-year follow-up

The aim of this randomized clinical trial was to compare the outcome of immediate versus delayedloading protocol using a new conical connection implant in post-extractive sockets with 4-year followup. Patients requiring single-tooth extraction for root fractures or periodontal disease in the maxillary or mandibular anterior or premolar areas were selected for the present study. After extraction, implants were placed immediately in fresh sockets. After randomization process, in group A immediate loading was performed while in group B a delayed loading protocol was followed. In both groups mean marginal bone loss was measured through intraoral digital radiographs at 3, 6, 12, 24, 36 and 48 months from loading. After a 48-month follow-up period, a success and survival rate of 96.55% was found in both groups. At 48-month follow-up, for group A a mean marginal bone loss of 0.14 ± 0.15mm was found, while for group B a value of 0.12 ± 0.12 mm was measured. No statistically significant differences between groups were found at each time point (P>0.05). When used in post-extractive immediate and delayed loading implant rehabilitations, the new conical connection implant showed a predictable outcome at 48-month follow-up. However, further clinical studies are needed to evaluate soft tissues adaptation, patient satisfaction, and long-term follow-up.

Three-Dimensional Evaluation of Peri-implant Soft Tissue When Tapered Implants Are Placed: Pilot Study with Implants Placed Immediately or Early Following Tooth Extraction

PURPOSE

This study examined a new 3D volumetric analysis method for the assessment of baseline-to-12-month changes of the soft tissue volume at early and immediately placed tapered implants after loading with ceramic single crowns.

MATERIALS AND METHODS

Eligible patients with one incisor, canine, or premolar to be extracted were included. The patients were divided randomly into early-placement or immediate-placement groups. Tapered implants (BLT, Institut Straumann) were placed after the extractions. In the early-placement group, the implants were placed 8 weeks after extraction. In the immediate-placement group, the implants were placed immediately after the extraction. All implants healed transmucosally, and the final crowns were inserted after healing (baseline). Impressions were made at screening, baseline, and 12 months after crown insertion (Permadyne, 3M). The casts were scanned (Imetric 4D) and aligned, and a superimposed area of interest (AOI) (labial/buccal aspects) was defined to assess the volumetric changes (GOM Inspect). Specific software (3Matic, Materialise NV) was used for volumetric analysis. The vertical mucosal recession was measured at each time point. Repeated-measures one-way analysis of variance and the Tukey method were used for statistical analysis (SPSS 22, IBM).

RESULTS

Twenty tapered implants (16 regular and four narrow) were placed in 20 patients (12 men and 8 women) in the early-placement (EP; n = 10) and immediate-placement (IP; n = 10) groups, respectively. Threedimensional volumetric analysis revealed soft tissue volume loss in both groups of 10.0 ± 16.5 mm³ (EP) and 24.3 ± 21.3 mm³ (IP) between baseline and 12 months (P = .6). The analysis also revealed local differences in the changes, displaying both localized gain and loss in both groups.

CONCLUSION

With this novel 3D analysis method, true volumetric soft tissue differences, ie, both localized gain and loss, were specified between the treatment groups.

Three-dimensional assessment of the extraction sockets, augmented with platelet-rich fibrin and calcium sulfate: A clinical pilot study

OBJECTIVES

This clinical study assessed and compared the linear and volumetric changes of extraction sockets grafted with a combination of Platelet-Rich Fibrin (PRF) and Calcium Sulfate (CS) (PRF-CS), and extraction sockets grafted with a combination of PRF and xenograft (X) (PRF-X).

METHODS

Five single maxillary premolar extraction sockets received PRF-CS grafts and five single maxillary premolar sockets received PRF-X grafts. Linear (horizontal and vertical) measurements were accomplished using Cone Beam Computed Tomography (CBCT) images and volumetric changes were assessed using MIMICS software. Soft tissue level changes were measured using Stonecast models. All measurements were recorded at baseline (before extraction) and at 5-months post-extraction.

RESULTS

Significant reduction in vertical and horizontal dimensions were observed in both groups except for distal bone height (D_BH = 0.44 ± 0.45 mm, p = 0.09) and palatal bone height (P_BH = 0.39 ± 0.34 mm, p = 0.06) in PRF-X group. PRF-CS group demonstrated mean horizontal shrinkage of 1.27 ± 0.82 mm (p = 0.02), when compared with PRF-X group (1.40 ± 0.85 mm, p = 0.02). Vertical resorption for mesial bone height (M_BH = 0.56 ± 0.25 mm, p = 0.008), buccal bone height (B_BH = 1.62 ± 0.91 mm, p = 0.01) and palatal bone height (P_BH = 1.39 ± 0.87 mm, p = 0.02) in PRF-CS group was more than resorption in PRF-X group (M_BH = 0.28 ± 0.14 mm, p = 0.01, B_BH = 0.63 ± 0.39 mm, p = 0.02 and P_BH = 0.39 ± 0.34 mm, p = 0.06). Volumetric bone resorption was significant within both groups (PRF-CS = 168.33 ± 63.68 mm³, p = 0.004; PRF-X = 102.88 ± 32.93 mm³, p = 0.002), though not significant (p = 0.08) when compared between groups. In PRF-X group, the distal soft tissue level (D_SH = 1.00 ± 0.50 mm, p = 0.03) demonstrated almost 2 times more reduction when compared with PRF-CS group (D_SH = 1.00 ± 1.00 mm, 0.08). The reduction of the buccal soft tissue level was pronounced in PRF-CS group (B_SH = 2.00 ± 2.00 mm, p = 0.06) when compared with PRF-X group (B_SH = 1.00 ± 1.50 mm, p = 0.05).

CONCLUSIONS

PRF-CS grafted sites showed no significant difference with PRF-X grafted sites in linear and volumetric dimensional changes and might show clinical benefits for socket augmentation. The study is officially registered with ClinicalTrials.gov Registration (NCT03851289).

Alveolar Ridge Regeneration of Damaged Extraction Sockets using a Bovine-derived Bone Graft in Association with a Titanium Foil: Prospective Case Series

AIMS

This study aimed to determine the dimensional change in the alveolar ridge after using an anodized titanium foil (Tseal) in association with bovine bone (BB) grafting in damaged extraction sockets by cone-beam computerized-tomography.

MATERIALS AND METHODS

Fifteen patients who had one hopeless tooth with over 80% of the buccal wall lost were selected and then the teeth were carefully extracted. The alveolar socket was filled with bovine bone and the Tseal was trimmed and adapted over the bone crest. The primary outcome variable was the change in the alveolar dimension (AD) measurements between baseline (T1) and 6 months (T2) after extraction in three points of analysis, 1mm, 3mm and 5mm below the palatal bone crest.

RESULTS

Bone regeneration was observed to occur between 87% and 116% of the AD assessed at the baseline. No statistical differences were observed. The mean AD value varied from 7.82±2.75 mm (T1) to 8.02±2.43 mm (T2) in the 1 mm point, from 7.99±2.67 mm to 8.71±2.26 mm to 3 mm and 8.56±2.60 mm to 9.00±2.52 mm at 5 mm area.

CONCLUSION

Bovine bone graft in association with Tseal achieved horizontal reconstruction of the alveolar crest in compromised socket within 6 months after surgery.