Surface plasmon resonance imaging measurements of ultrathin organic films

An absorption-based surface plasmon resonance sensor applied to sodium ion sensing based on an ion-selective optode membrane

A surface plasmon resonance (SPR) sodium ion sensor using an ion optode membrane film was experimentally and theoretically described based on an absorption-based SPR principle proposed in our previous article (Kurihara, K; Suzuki, K. AnaL Chem. 2002, 74, 696-701). The sodium ion concentrations from 10(-6) to 10(-1) have been successfully determined not only by the resonance angle diagnosis of the SPR curve but also by the minimum reflectance one. The ion optode film was plasticized poly(vinyl chloride) including a neutral sodium ionophore, a pH-sensitive cationic dye, and an anionic additive. Its optical absorption intensity changed with the sodium ion concentrations. The SPR ion sensor physically measured the complex refractive index caused by the absorption in the ion optode film. We have exhaustively investigated the experimental response behavior of the SPR curve relative to the sodium ion concentrations by comparison with numerically simulated SPR curves using a three-layer Fresnel equation including experimental values for the sodium ion optode membrane film. As predicted by the absorption-based SPR principle, the SPR curve behavior of the SPR ion sensors depended on two factors: one was the relation between the excitation frequency of the light source and the absorption maximum frequency in the ion optode film while the other was the gold metallic thickness in the Kretchmann configuration. The concept and practical theory of an absorption-based SPR sensor not only have been proved by the experimental results of the SPR sodium ion sensor but also have successfully allowed flexible ion sensing in an SPR sensor, which would be very difficult without the absorption mechanism in the ion optode film.

Label-free detection of 16S ribosomal RNA hybridization on reusable DNA arrays using surface plasmon resonance imaging

In this paper, we describe the detection of bacterial cell-extracted 16S ribosomal RNA (rRNA) using an emerging technology, surface plasmon resonance (SPR) imaging of DNA arrays. Surface plasmon resonance enables detection of molecular interactions on surfaces in response to changes in the index of refraction, therefore eliminating the need for a fluorescent or radioactive label. A variation of the more common SPR techniques, SPR imaging enables detection from multiple probes in a reusable array format. The arrays developed here contain DNA probes (15-21 bases) designed to be complementary to 16S rRNA gene sequences of Escherichia coli and Bacillus subtilis as well as to a highly conserved sequence found in rRNAs from most members of the domain Bacteria. We report species-specific hybridization of cell-extracted total RNA and in vitro transcribed 16S rRNA to oligonucleotide probes on SPR arrays. We tested multiple probe sequences for each species, and found that success or failure of hybridization was dependent upon probe position in the 16S rRNA molecule. It was also determined that one of the probes intended to bind 16S rRNA also bound an unknown protein. The amount of binding to these probes was quantified with SPR imaging. A detection limit of 2 micro g ml-1 was determined for fragmented E. coli total cellular RNA under the experimental conditions used. These results indicate the feasibility of using SPR imaging for 16S rRNA identification and encourage further development of this method for direct detection of other RNA molecules.

A nanoscale optical biosensor: sensitivity and selectivity of an approach based on the localized surface plasmon resonance spectroscopy of triangular silver nanoparticles

Triangular silver nanoparticles ( approximately 100 nm wide and 50 nm high) have remarkable optical properties. In particular, the peak extinction wavelength, lambda(max) of their localized surface plasmon resonance (LSPR) spectrum is unexpectedly sensitive to nanoparticle size, shape, and local ( approximately 10-30 nm) external dielectric environment. This sensitivity of the LSPR lambda(max) to the nanoenvironment has allowed us to develop a new class of nanoscale affinity biosensors. The essential characteristics and operational principles of these LSPR nanobiosensors will be illustrated using the well-studied biotin-streptavidin system. Exposure of biotin-functionalized Ag nanotriangles to 100 nM streptavidin (SA) caused a 27.0 nm red-shift in the LSPR lambda(max). The LSPR lambda(max) shift, DeltaR/DeltaR(max), versus [SA] response curve was measured over the concentration range 10(-)(15) M < [SA] < 10(-)(6) M. Comparison of the data with the theoretical normalized response expected for 1:1 binding of a ligand to a multivalent receptor with different sites but invariant affinities yielded approximate values for the saturation response, DeltaR(max) = 26.5 nm, and the surface-confined thermodynamic binding constant K(a,surf) = 10(11) M(-)(1). At present, the limit of detection (LOD) for the LSPR nanobiosensor is found to be in the low-picomolar to high-femtomolar region. A strategy to amplify the response of the LSPR nanobiosensor using biotinylated Au colloids and thereby further improve the LOD is demonstrated. Several control experiments were performed to define the LSPR nanobiosensor's response to nonspecific binding as well as to demonstrate its response to the specific binding of another protein. These include the following: (1) electrostatic binding of SA to a nonbiotinylated surface, (2) nonspecific interactions of prebiotinylated SA to a biotinylated surface, (3) nonspecific interactions of bovine serum albumin to a biotinylated surface, and (4) specific binding of anti-biotin to a biotinylated surface. The LSPR nanobiosensor provides a pathway to ultrasensitive biodetection experiments with extremely simple, small, light, robust, low-cost instrumentation that will greatly facilitate field-portable environmental or point-of-service medical diagnostic applications.

Analysis of biomolecular interactions using a miniaturized surface plasmon resonance sensor

A commercially available miniaturized surface plasmon resonance sensor has been investigated for its applicability to biological interaction analysis. The sensor was found to exhibit excellent repeatability and linearity for high-refractive index solutions and good reproducibility for the binding of proteins. Its detection limit for the monoclonal antibody M1 was found to be 2.1 fmol, which corresponds to a surface concentration of 21 pg/mm2. Simple surface immobilization procedures relying on biotin/avidin or glycoprotein/lectin chemistry have been explored. Equilibrium dissociation constants for the binding of the FLAG peptide to its monoclonal antibody (M1) and for the binding of concanavalin A to a glycoprotein have been determined. The close agreement of these measurements with values obtained by surface fluorescence microscopy and fluorescence correlation spectroscopy helps to validate the use of this device. Thus, this sensor shows promise as an inexpensive, portable, and accurate tool for bioanalytical applications in laboratory and clinical settings.

Detection of oligonucleotide hybridization at femtomolar level and sequence-specific gene analysis of the Arabidopsis thaliana leaf extract with an ultrasensitive surface plasmon resonance spectrometer

A flow-injection (FI) device is combined, through the use of a low-volume (4 microl) flow cell, with an ultrasensitive surface plasmon resonance (SPR) spectrometer equipped with a bi-cell photodiode detector. The application of this novel FI-SPR device for sequence-specific ultratrace analysis of oligodeoxynucleotides (ODNs) and polydeoxynucleotides was demonstrated. Self-assembled monolayers of ODN probes are tethered onto Au films with a mercaptohexyl group at the 3' ends. The FI-SPR provides a detection level (< or =54 fM) 2-3 orders of magnitude lower than other SPR devices and compares well with several ultrasensitive detection methods for labeled DNA targets (e.g. fluorophore-tagged and radiolabeled DNA samples). The technique is also highly selective, since a 47mer ODN target with a single-base mismatch yielded a much smaller SPR signal, and a specific interaction was detected when the complementary target was present at 0.001% of the total DNA. The FI-SPR was extended to the measurement of two individual genes in a cDNA mixture transcribed from an Arabidopsis thaliana leaf mRNA pool. The greatly enhanced sensitivity not only obviates the necessity of DNA labeling, but also significantly reduces sample consumption, allowing direct quantification of low abundance mRNAs in cellular samples without amplification.

Chemically induced hairpin formation in DNA monolayers

A naphthyridine dimer that binds specifically to G-G mismatches has been used to induce hairpin formation in oligonucleotides immobilized onto chemically modified gold surfaces. Surface plasmon resonance (SPR) imaging measurements of DNA microarrays were used to demonstrate that binding of the naphthyridine dimer to G-G mismatches within the stem portion of an immobilized 42-mer oligonucleotide could be used to induce hairpin formation that prevented hybridization of DNA complementary to the loop sequence. In addition, the selectivity of the naphthyridine dimer for G-G mismatches was verified through SPR imaging measurements of the hybridization adsorption of an 11-mer oligonucleotide to a four-component DNA array of zero- and single-base mismatch sequences.

Biosensor technology and surface plasmon resonance for real-time detection of genetically modified Roundup Ready soybean gene sequences

Biospecific interaction analysis (BIA) was performed using surface plasmon resonance (SPR) and biosensor technologies to detect genetically modified Roundup Ready soybean gene sequences. We first immobilized, on SA sensor chips, single-stranded biotinylated oligonucleotides containing soybean lectin and Roundup Ready gene sequences, and the efficiency of hybridization to oligonucleotide probes differing in length was determined. Second, we immobilized biotinylated PCR products from nontransgenic soybeans (genomes carrying only the lectin gene), as well as from genetically modified Roundup Ready soybean, and we injected the oligonucleotide probes. Furthermore, we used the sensor chips carrying either lectin and Roundup Ready soybean PCR products or 21-mer oligonucleotide as probes, and we injected both nonpurified and purified asymmetric PCR products. The results obtained show that 13 and 15 mer oligonucleotides are suitable probes to detect genetically modified Roundup Ready soybean gene sequences (either target oligonucleotides or PCR products) under standard BIA experimental conditions. By contrast, when 11 mer DNA probes were employed, no efficient hybridization was obtained. All the SPR-based formats were found to be useful for detection of Roundup Ready gene sequences, suggesting that these procedures are useful for the real-time monitoring of hybridization between target single-stranded PCR products, obtained by using as substrates DNA isolated from normal or transgenic soybeans, and oligonucleotide or PCR-generated probes, therefore enabling a one-step, nonradioactive protocol to perform detection.

SPR imaging measurements of 1-D and 2-D DNA microarrays created from microfluidic channels on gold thin films

Microfluidic channels fabricated from poly(dimethylsiloxane) (PDMS) are employed in surface plasmon resonance imaging experiments for the detection of DNA and RNA adsorption onto chemically modified gold surfaces. The PDMS microchannels are used to (i) fabricate "1-D" single-stranded DNA (ssDNA) line arrays that are used in SPR imaging experiments of oligonucleotide hybridization adsorption and (ii) create "2-D" DNA hybridization arrays in which a second set of PDMS microchannels are placed perpendicular to a 1-D line array in order to deliver target oligonucleotide solutions. In the 1-D line array experiments, the total sample volume is 500 microL; in the 2-D DNA array experiments, this volume is reduced to 1 microL. As a demonstration of the utility of these microfluidic arrays, a 2-D DNA array is used to detect a 20-fmol sample of in vitro transcribed RNA from the uidA gene of a transgenic Arabidopsis thaliana plant. It is also shown that this array fabrication method can be used for fluorescence measurements on chemically modified gold surfaces.

Semi-synthetic nucleic acid-protein conjugates: applications in life sciences and nanobiotechnology

Semi-synthetic conjugates of nucleic acids and proteins can be generated by either covalent coupling chemistry, or else by non-covalent biomolecular recognition systems, such as receptor-ligands of complementary nucleic acids. These nucleic acid-protein conjugates are versatile molecular tools which can be applied, for instance, in the self-assembly of high-affinity reagents for immunological detection assays, the fabrication of laterally microstructured biochips containing functional biological groups, and the biomimetic 'bottom-up' synthesis of nanostructured supramolecular devices. This review summarizes the current state-of-the-art synthesis and characterization methods of artificial nucleic acid-protein conjugates, as well as applications and perspectives for future developments of such hybrid biomolecular components in life sciences and nanobiotechnology.

Surface plasmon resonance: towards an understanding of the mechanisms of biological molecular recognition

With the introduction of new instruments and improved sensor chip chemistries, surface plasmon resonance (SPR) is finding new applications for molecular interaction studies. Easy access to high-quality kinetic and thermodynamic data for macromolecular binding events is providing insights into the fundamental mechanisms of molecular recognition. Progress is being made to allow larger-scale interaction studies. In addition, combining SPR with other analytical methods is enabling SPR-based analysis of interaction proteomics.

Peptide nucleic acids and biosensor technology for real-time detection of the cystic fibrosis W1282X mutation by surface plasmon resonance

In this paper we demonstrate that peptide nucleic acids (PNAs) are excellent probes able to detect the W1282X point mutation of the cystic fibrosis (CF) gene when biospecific interaction analysis (BIA) by surface plasmon resonance (SPR) and biosensor technologies is performed. The results reported here suggest that BIA is an easy, fast, and automatable approach for detecting mutations of CF, allowing real-time monitoring of hybridization between 9-mer CF PNA probes and target biotinylated PCR products generated from healthy, heterozygous subjects and homozygous W1282X samples and immobilized on streptavidin-coated sensor chips. This method is, to our knowledge, the first application of PNAs, BIA, and SPR to a human hereditary mutation, and demonstrates the feasibility of these approaches for discriminating between normal and mutated target DNA. We like to point out that the procedure described in this paper is rapid and informative; results are obtained within a few minutes. This could be of great interest for molecular pre-implantation diagnosis to discriminate homozygous CF embryos from heterozygous and healthy embryos. Other advantages of the methodology described in the present paper are (a) that it is a nonradioactive methodology and (b) that gel electrophoresis and/or dot-spot analysis are not required. More importantly, the demonstration that SPR-based BIA could be associated with microarray technology allows us to hypothesize that the method described in the present paper could be used for the development of a protocol employing multispotting on SPR biosensors of many CF-PCR products and a real-time simultaneous analysis of hybridization to PNA probes. These results are in line with the concept that SPR could be an integral part of a fully automated diagnostic system based on the use of laboratory workstations, biosensors, and arrayed biosensors for DNA isolation, preparation of PCR reactions, and identification of point mutations.

Bioorganic applications of semisynthetic DNA-protein conjugates

Semisynthetic DNA-protein conjugates are versatile molecular tools useful, for instance, in the self-assembly of high-affinity reagents for immunological detection assays, the fabrication of highly functionalized laterally microstructured biochips, and the biomimetic "bottom-up" synthesis of nanostructured supramolecular devices. This concept paper summarizes the current state-of-the-art concerning the synthesis, characterization, and applications of such hybrid molecules, and also draws perspectives on future developments.

Surface plasmon resonance imaging measurements of DNA and RNA hybridization adsorption onto DNA microarrays

Surface plasmon resonance (SPR) imaging is a surface-sensitive spectroscopic technique for measuring interactions between unlabeled biological molecules with arrays of surface-bound species. In this paper, SPR imaging is used to quantitatively detect the hybridization adsorption of short (18-base) unlabeled DNA oligonucleotides at low concentration, as well as, for the first time, the hybridization adsorption of unlabeled RNA oligonucleotides and larger 16S ribosomal RNA (rRNA) isolated from the microbe Escherichia coli onto a DNA array. For the hybridization adsorption of both DNA and RNA oligonucleotides, a detection limit of 10 nM is reported; for large (1,500-base) 16S rRNA molecules, concentrations as low as 2 nM are detected. The covalent attachment of thiol-DNA probes to the gold surface leads to high surface probe density (10(12) molecules/cm2) and excellent probe stability that enables more than 25 cycles of hybridization and denaturing without loss in signal or specificity. Fresnel calculations are used to show that changes in percent reflectivity as measured by SPR imaging are linear with respect to surface coverage of adsorbed DNA oligonucleotides. Data from SPR imaging is used to construct a quantitative adsorption isotherm of the hybridization adsorption on a surface. DNA and RNA 18-mer oligonucleotide hybridization adsorption is found to follow a Langmuir isotherm with an adsorption coefficient of 1.8 x 10(7) M(-1).