Probing Cellular Chemistry in Biological Systems with Microelectrodes

Theory of Polymer Entrapped Enzyme Ultramicroelectrodes: Fundamentals

We have developed a theoretical description of the amperometric response of ultramicroelectrode (UME) biosensors formed via enzyme entrapment. Our model allows for multiple enzymes and co-substrates, and results in a closed-form analytical expression for the steady-state current response of the disk ultramicroelectrode. It captures the effects of enzyme-entrapment domain size, species transport properties (which can be different in the polymer and surrounding electrolyte), enzyme kinetics, and axisymmetric diffusion. Assumptions inherent in the derivation are carefully explained, as are the resulting limits on the applicability of the results. The ability to theoretically predict the response of enzyme entrapped UMEs should enable improved design, operation, and data interpretation for this important class of biosensors.

Nanoelectrochemistry of mammalian cells

There is a significant current interest in development of new techniques for direct characterization of the intracellular redox state and high-resolution imaging of living cells. We used nanometer-sized amperometric probes in combination with the scanning electrochemical microscope (SECM) to carry out spatially resolved electrochemical experiments in cultured human breast cells. With the tip radius approximately 1,000 times smaller than that of a cell, an electrochemical probe can penetrate a cell and travel inside it without apparent damage to the membrane. The data demonstrate the possibility of measuring the rate of transmembrane charge transport and membrane potential and probing redox properties at the subcellular level. The same experimental setup was used for nanoscale electrochemical imaging of the cell surface.

Dopamine signaling in the dorsal striatum is essential for motivated behaviors: lessons from dopamine-deficient mice

Genetically engineered mice that lack tyrosine hydroxylase in all dopaminergic neurons become hypoactive and aphagic, and they starve by 4 weeks of age. However, they can be rescued by daily treatment with l-dopa, which restores activity and feeding for about 10 hours. Thus, these mice can be examined in both dopamine-depleted and dopamine-replete states. A series of behavioral experiments lead to the primary conclusion that in the dopamine-depleted state these mice are not motivated to engage in goal-directed behaviors. Nevertheless, they still have a preference for sucrose, they can learn the location of food rewards, and they can form a conditioned-place preference for drugs. Dopamine signaling can be restored to the striatum by several different viral gene-therapy procedures. Restoring dopamine signaling selectively to the dorsal striatum is sufficient to allow feeding, locomotion, and reward-based learning. The rescued mice appear to have normal motivation to engage in all goal-directed behaviors that have been tested. The results suggest that dopamine facilitates the output from dorsal striatum, which provides a permissive signal allowing feeding and other goal-directed behaviors.

Time-resolved microdialysis for in vivo neurochemical measurements and other applications

Monitoring changes in chemical concentrations over time in complex environments is typically performed using sensors and spectroscopic techniques. Another approach is to couple sampling methods, such as microdialysis, with chromatographic, electrophoretic, or enzymatic assays. Recent advances of such coupling have enabled improvements in temporal resolution, multianalyte capability, and automation. In a sampling and analysis method, the temporal resolution is set by the mass sensitivity of the analytical method, analysis time, and zone dispersion during sampling. Coupling methods with high speed and mass sensitivity to microdialysis sampling help to reduce some of these contributions to yield methods with temporal resolution of seconds. These advances have been primarily used in monitoring neurotransmitters in vivo. This review covers the problems associated with chemical monitoring in the brain, recent advances in using microdialysis for time-resolved in vivo measurements, sample applications, and other potential applications of the technology such as determining reaction kinetics and process monitoring.

Individual nanotube-based needle nanoprobes for electrochemical studies in picoliter microenvironments

We report the fabrication and characterization of individual nanotube-based, long and straight needle nanoprobes for electrochemistry and the study of their applicability and behavior in microenvironments. The needle nanoprobe, with a nanoscale ring-shaped Au electrode at the tip of the needle serving as the active electrode, was characterized by electrochemical current measurement and cyclic voltammetry and analyzed with electrochemical models. Such a needle nanoprobe, in combination with another metal-coated nanowire as a reference electrode, was further used, for the first time, for local electrochemical sensing inside microdroplets having volumes down to a few picoliters. We explain the acquired voltammetric behaviors of redox-active molecules in confined microscale environments and reveal a unique electrochemical mechanism which allows the regeneration of the redox-active molecules and the establishment of a stable reference potential in the microenvironments.

MEMS needle-type sensor array for in situ measurements of dissolved oxygen and redox potential

Microelectrodes are among the most accurate and reliable monitoring devices for measuring the dynamics of biofilm processes. This paper describes a novel needle-type microelectrode array (MEA) for simultaneous in situ measurements of dissolved oxygen (DO) and oxidation reduction potential (ORP) fabricated using microelectromechanical systems (MEMS) technologies. The MEA exhibits fast response times for both DO and ORP measurements and shows a substantial increase in DO sensitivity. To demonstrate the versatility of the new sensor, it was applied to the measurement of DO and ORP microprofiles in a multispecies biofilm. This work demonstrates that the MEA is able to monitor local concentration changes with a high spatial resolution and provide the versatility of the microelectrode technique needed for biofilm studies as well as the capability for repetitive measurements. In addition, the use of MEMS technologies and batch fabrication approaches enables integration, high consistency, high yields, and mass production. With further development, it may be possible to add additional sensors to the MEA (e.g., pH, phosphate) and integrate them with a reference electrode.

Simulations of cyclic voltammetric and chronoamperometric electrode responses at a disk electrode using combinations of spherical and cylindrical electrode geometries

Using geometric models based on one-dimensional transport at spheres and cylinders, three methods for improving the simulation of voltammetric behavior of a disk electrode have been explored. One method is based on the common assumption of equivalency between the limiting currents for a disk and a hemisphere under steady-state diffusion conditions. The second method involves the use of a partial-sphere geometry which is a better approximation that is suitable at the extreme diffusional limits achievable at a disk electrode of fully planar and steady-state transport. The third method, which is generally applicable, is a further refinement that uses a combination of appropriate one-dimensional spherical and cylindrical geometries. The results demonstrate that reasonably accurate approximations of disk behavior for several reaction mechanisms can be achieved in a fraction of the time required to compute the more rigorous two-dimensional model. We propose that the approximation serve primarily as a fast way to explore system behavior and establish approximate values of the relevant parameters. More accurate computations can then be performed using the two-dimensional model.

An innovative microelectrode fabricated using photolithography for measuring dissolved oxygen distributions in aerobic granules

In this work an innovative microelectrode was successfully fabricated using photolithography for determination of dissolved oxygen distributions in aerobic granules, which were sampled from a nitrifying sequencing batch reactor. A negative photoresist, SU-8, was used as a substrate for the microelectrode and a 70 microm wide needle was photopatterned on it. The microelectrode could be renewed several times. Cyclic voltammetry analysis and dissolved oxygen measurement demonstrated that the microelectrode was stable and reliable. Dissolved oxygen distribution in a nitrifying granule was successfully monitored with the microelectrode. The profiles indicated that the main active part of the nitrifying granule was the upper 150 microm layer. Using the procedures developed in this work, microelectrodes of the desired shape could be constructed with precise size control at micrometers-scale.

Hybrid amperometric and conductometric chemical sensor based on conducting polymer nanojunctions

We report on a hybrid chemical sensor that can perform either amperometric or conductometric detection alone or simultaneously. It consists of an array of electrode pairs in which the two electrodes in each pair are separated with micrometer to nanometer-scale gaps. The gaps are bridged with conducting polymer (polyaniline) so that one can measure the conductance of the polymer bridge like a conventional Chem-FET. The electrode geometries are designed to allow simultaneously detection of electrochemical current like a conventional microelectrode amperometric sensor. The hybrid device provides increased selectivity for detection of analytes in complex matrixes and may provide new insights into the electrochemical reaction mechanisms of analytes. As an example, we have demonstrated the detection of dilute neurotransmitter (dopamine) in the presence of its concentrated major physiological interferent, ascorbic acid, which is not possible using either the amperometric or the conductometric techniques alone.

Bench-Top Method for Fabricating Glass-Sealed Nanodisk Electrodes, Glass Nanopore Electrodes, and Glass Nanopore Membranes of Controlled Size

A simple benchtop method of fabricating glass-sealed nanometer-sized Au and Pt disk electrodes, glass nanopore electrodes, and glass nanopore membranes is reported. The synthesis of all three structures is initiated by sealing the tips of electrochemically sharpened Au and Pt microwires into glass membranes at the end of a soda lime or lead glass capillary. Pt and Au nanodisk electrodes are obtained by hand polishing using a high-input impedance metal oxide semiconductor field effect transistor (MOSFET)-based circuit to monitor the radius of the metal disk. Proper biasing of the MOSFET circuit, based on a numerical analysis of the polishing circuit impedance, allows for the reproducible fabrication of Pt disk electrodes of radii as small as 10 nm. Significantly smaller background currents in voltammetric measurements are obtained using lead glass capillaries, a consequence of the lower mobility of Pb(2+) (relative to Na(+)) in the glass matrix. Glass nanopore electrodes and glass nanopore membranes are fabricated, respectively, by removal of part or all of the metal sealed in the glass membranes. The nanostructures are characterized by atomic force microscopy, steady-state voltammetry, and ion conductivity measurements.

Coordinated accumbal dopamine release and neural activity drive goal-directed behavior

Intracranial self-stimulation (ICSS) activates the neural pathways that mediate reward, including dopaminergic terminal areas such as the nucleus accumbens (NAc). However, a direct role of dopamine in ICSS-mediated reward has been questioned. Here, simultaneous voltammetric and electrophysiological recordings from the same electrode reveal that, at certain sites, the onset of anticipatory dopamine surges and changes in neuronal firing patterns during ICSS are coincident, whereas sites lacking dopamine changes also lack patterned firing. Intrashell microinfusion of a D1, but not a D2 receptor antagonist, blocks ICSS. An iontophoresis approach was implemented to explore the effect of dopamine antagonists on firing patterns without altering behavior. Similar to the microinfusion experiments, ICSS-related firing is selectively attenuated following D1 receptor blockade. This work establishes a temporal link between anticipatory rises of dopamine and firing patterns in the NAc shell during ICSS and suggests that they may play a similar role with natural rewards and during drug self-administration.

Scanning electrochemical microscopy for direct imaging of reaction rates

Not only in electrochemistry but also in biology and in membrane transport, localized processes at solid-liquid or liquid-liquid interfaces play an important role at defect sites, pores, or individual cells, but are difficult to characterize by integral investigation. Scanning electrochemical microscopy is suitable for such investigations. After two decades of development, this method is based on a solid theoretical foundation and a large number of demonstrated applications. It offers the possibility of directly imaging heterogeneous reaction rates and locally modifying substrates by electrochemically generated reagents. The applications range from classical electrochemical problems, such as the investigation of localized corrosion and electrocatalytic reactions in fuel cells, sensor surfaces, biochips, and microstructured analysis systems, to mass transport through synthetic membranes, skin and tissue, as well as intercellular communication processes. Moreover, processes can be studied that occur at liquid surfaces and liquid-liquid interfaces.

Conical tungsten tips as substrates for the preparation of ultramicroelectrodes

Here we describe a simple method to prepare voltammetric microelectrodes using tungsten wires as a substrate. Tungsten wires have a high tensile modulus and enable the fabrication of electrodes that have small dimensions overall while retaining rigidity. In this work, 125 microm tungsten wires with a conical tip were employed. For the preparation of gold or platinum ultramicroelectrodes, commercial tungsten microelectrodes, completely insulated except at the tip, were used as substrates. Following removal of oxides from the exposed tungsten, platinum or gold was electroplated, yielding surfaces with an electroactive area of between 1 x 10-6 and 2 x 10-6 cm2. Carbon surfaces on the etched tip of tungsten microwires were prepared by coating with photoresist followed by pyrolysis. The entire electrode was then insulated with Epoxylite except the tip, yielding an exposed carbon surface with an area of around 4 x 10-6 to 6 x 10-6 cm2. All three types of ultramicroelectrodes fabricated on the tungsten wire had similar electrochemical behavior to electrodes fabricated from wires or fibers insulated with glass tubes.

Scanning electrochemical microscopy: principles and applications to biophysical systems

This review highlights numerous and wide ranging biophysical and biochemical applications of scanning electrochemical microscopy (SECM). SECM instrumentation and theoretical modelling, necessary for experimental interpretation, are outlined, followed by a detailed discussion of the diverse applications of this technique. These include the measurement of flow through membranes, the determination of kinetic parameters of reactions, the investigation of the permeability of small molecules in tissues and monitoring biological processes, such as the production of oxygen or nitric oxide by cells. The significant impact of micro-electrochemical techniques on our understanding of basic physicochemical processes at biologically relevant interfaces is also considered. Studies reviewed include transport across and within bilayers and monolayers. Recent advances in SECM include the combination of SECM with other techniques, such as atomic force microscopy and optical microscopy. These developments are highlighted, along with prospects for the future.

Social context-dependent singing-regulated dopamine

Like the mammalian striatum, the songbird striatum receives dense dopaminergic input from the midbrain ventral tegmental area-substantia nigra pars compacta complex. The songbird striatum also contains a unique vocal nucleus, Area X, which has been implicated in song learning and social context-dependent song production. Area X shows increased neural firing and activity-dependent gene expression when birds sing, and the level of activation is higher and more variable during undirected singing relative to directed singing to other birds. Here we show in the first report of in vivo microdialysis in awake, behaving songbirds that singing is associated with increased dopamine levels in Area X. Dopamine levels are significantly higher with directed relative to undirected singing. This social context-dependent difference in dopamine levels requires the dopamine transporter, because local in vivo blockade of the transporter caused dopamine levels for undirected singing to increase to levels similar to that for directed singing, eliminating the social context-dependent difference. The increase in dopamine is presumably depolarization and vesicular release dependent, because adding of high K+ increased and removal of Ca2+ increased and decreased extracellular DA levels. Our findings implicate DA and molecules that control DA kinetics in singing behavior and social context-dependent brain function.

Subsecond Voltammetric Separation between Dopamine and Serotonin in the Presence of Ascorbate

Although voltammetry has proved an important tool for unraveling the dynamics of specific neurotransmitter molecules during the past decade, it has been very difficult to monitor more than one neurotransmitter simultaneously. In this work, we present a voltammetric methodology that allows discrimination between dopamine and serotonin, two important neurotransmitter molecules with very similar electrochemical properties, in the presence of high concentrations of ascorbate. We combined the application of a novel large-amplitude/high-frequency voltage excitation with signal processing techniques valid for the analysis of nonstationary and nonlinear phenomena. This allows us to minimize the contribution from capacitance and preserve the faradaic features of the voltammetric response providing us with excellent voltammetric detail. Using appropriate voltage excitation parameters and defining specific regions in the voltage space, so-called voltage windows, we can measure the concentrations of dopamine and serotonin separately or independently in mixed solutions even in the presence of high concentrations of ascorbate. Because of the enhanced voltammetric detail of this new technique, it is also possible to explore effects attributed to interfacial phenomena such as adsorption/desorption and electrode fouling.

Biological applications of scanning electrochemical microscopy: chemical imaging of single living cells and beyond

Recent applications of scanning electrochemical microscopy (SECM) to studies of single biological cells are reviewed. This scanning probe microscopic technique allows the imaging of an individual cell on the basis of not only its surface topography but also such cellular activities as photosynthesis, respiration, electron transfer, single vesicular exocytosis and membrane transport. The operational principles of SECM are also introduced in the context of these biological applications. Recent progress in techniques for high-resolution SECM imaging are also reviewed. Future directions, such as single-channel detection by SECM, high-resolution imaging with nanometer-sized probes, and combined SECM techniques for multidimensional imaging are also discussed.