Recent advances for dyes removal using novel adsorbents: A review

PDA-cross-linked beta-cyclodextrin: a novel adsorbent for the removal of BPA and cationic dyes

In this study, 4,4'-(hexafluoroisopropene) diphthalic acid (PDA)-CD polymers containing β-cyclodextrin (CD) were synthesized for the adsorption of endocrine disrupting chemicals (EDCs) and dyes. It features great adsorption of bisphenol A (BPA), methylene blue (MB) and neutral red (NR). The maximum adsorption capacities of MB, NR and BPA can reach 113.06, 106.8 and 51.74 mg/g, respectively. The tandem adsorption results revealed that adsorptions of dyes and BPA onto PDA-CD polymer were two independent processes: non-polar BPA entrapment by cyclodextrin cavities while dyes were captured by the carboxyl groups and π-π stacking interactions. The adsorption processes performed well in a wide range of pH (4.0-10.0) and were not affected by fulvic acid (FA) and inorganic ions.

Adsorption of indigo carmine on functional chitosan and β-cyclodextrin/chitosan beads: Equilibrium, kinetics and mechanism studies

The present study was designed to produce novel cross-linked Chitosan and Chitosan/β-Cyclodextrin beads and study the adsorption of Indigo Carmine. Both adsorbents were characterized by SEM and FTIR techniques. Batch experiments were conducted in order to evaluate the effect of initial adsorbent's concentration, dye's initial concentration, initial pH and temperature. In all cases Chitosan/β-Cyclodextrin crosslinked beads exhibited higher removal efficiency of Indigo Carmine. Higher removal rates of Indigo Carmine were observed at low values of dye's initial concentration, pH and temperature, and high concentrations of adsorbent. The equilibrium adsorption data were a good fit for both Langmuir and Freundlich models and maximum adsorption capacity was 500.0 and 1000.0 mg_IC/g_adsorbent for Chitosan and Chitosan/β-Cyclodextrin crosslinked beads, respectively. Adsorption of Indigo Carmine was found to follow the pseudo-second order. The negative values of ΔG^o, ΔH^o and ΔS^o indicate that the adsorption process is exothermic, spontaneous and favorable at low temperatures.

Polydopamine modified cyclodextrin polymer as efficient adsorbent for removing cationic dyes and Cu2

An eco-friendly polydopamine composite adsorbent (CD-CA/PDA) based on cyclodextrin polymer was prepared for cationic dyes and metals removing. CD-CA/PDA, combining the advantages of cyclodextrin and polydopamine, which has quite abundant carboxyl and catechol groups, so methylene blue (MB), malachite green (MG), crystal violet (CV) and copper ion (Cu²⁺) can be easily removed by electrostatic force. Adsorption kinetic results showed all adsorption process fitted well with pseudo-second-order model. In addition, the isotherm fitted results showed that the adsorption processes of CD-CA/PDA on MG and Cu²⁺ were consistent with sips model, while the adsorption processes of MB and CV agreed well with Freundlich and Langmuir model, respectively. The fitted adsorption capacities of CD-CA/PDA for MB, MG, CV and Cu²⁺ were 582.95 mg/g (1.82 mmol/g), 1174.67 mg/g (3.22 mmol/g), 473.01 mg/g (1.16 mmol/g) and 73.64 mg/g (1.16 mmol/g), respectively. Moreover, it is worth noting that cationic dyes have no competitive adsorption in series. CD-CA/PDA is of great recyclability, and can be reused by at least 5 times. Due to the facile and eco-friendly preparation process and excellent adsorption performance, CD-CA/PDA has a great potential in the field of wastewater treatment.

Green fabrication of ZnO nanoparticles using Eucalyptus spp. leaves extract and their application in wastewater remediation

The present study explored removal of carcinogenic cationic and anionic dyes from aqueous medium using green fabricated zinc oxide nanoparticles (ZnO-NPs). The ZnO-NPs were synthesized employing biogenic green reduction and precipitation approach. The characterization of ZnO NPs was done using various techniques such as FESEM, XRD, BET, TGA, HRTEM, EDX, and FTIR. All experiments were conducted in batch mode. Maximum removal was achieved at pH 6.0 and pH 8.0 for Congo Red (CR) and Malachite Green (MG) dyes respectively. Dye adsorption process showed better fit with Langmuir and Temkin isotherm models for CR dye and MG dye respectively. Maximum adsorption capacity of ZnO NPs was 48.3 mg/g for CR dye and 169.5 mg/g for MG dye. The dye adsorption followed pseudo-second order model and values of thermodynamic parameters confirmed that the adsorption process was spontaneous and favourable. Reusability efficiency of the nanoparticle was explored using ethanol and water and based on results it was inferred that ZnO-NPs can be reused for dye removal. Effect of salinity on the removal of CR and MG dyes was also explored and found that presence of salinity in aqueous medium have adverse impact on the dye removal efficiency of ZnO-NPs.

Megamerger of biosorbents and catalytic technologies for the removal of heavy metals from wastewater: Preparation, final disposal, mechanism and influencing factors

Heavy metal pollution, because of its high toxicity, non-biodegradability and biological enrichment, has been identified as a global aquatic ecosystems threat in recent decades. Due to the high efficiency, low cost, satisfactory recyclability, easy storage and separation, biosorbents have exhibited a promising prospect for heavy metals treatment in aqueous phase. This article comprehensively summarized different types of biosorbents derived from available low-cost raw materials such as agricultural and forestry wastes. The raw materials obtained are treated with conventional pretreatment or novel methods, which can greatly enhance the adsorption performance of the biosorbents. The suitable immobilization methods can not only further enhance the adsorption performance of the biosorbents, but also facilitate the process of separating the biosorbents from the wastewater. In addition, once biosorbents are put into large-scale use, the final disposal problems cannot be avoided. Therefore, it is necessary to review the currently accepted final disposal methods of biosorbents. Moreover, through the analysis of the adsorption and desorption mechanisms of biosorbents, it is not only beneficial to find the better methods to improve the adsorption performance of the biosorbents, but also better to explain the influencing factors of adsorption effect for biosorbents. Especially, different from many researches focused on biosorbents, this work highlighted the combination of biosorbents with catalytic technologies, which provided new ideas for the follow-up research direction of biosorbents. Finally, the purpose of this paper is to inject new impetus into the future development of biosorbents.

Current Advances of Polymer Composites for Water Treatment and Desalination

Over the past five years, a lot of research activities in polymer composites were done in order to improve environmental sustainability and to present advantages for commercial applications of water treatment and desalination. Polymers offered tunable properties, improved processability, remarkable stability, high surface area for fast decontamination, selectivity to eliminate different pollutants, and cost-cutting of water treatment. Hence, the development of polymeric materials is one of the future directions to meet the environmental water standards and to supply the water requirements of the growing populations. This review highlighted the very recent achievements in fabrication, characterization, and applications of polymeric composites used for water treatment and desalination. The polymeric modifications, the addition of functional groups, and the assemblies of nanomaterials were also discussed in detail. In particular, great attention was paid to the recent advances in polymer/polymer composites, polymer/carbon composites, and polymer/clay composites, presenting their usage in the removal of various types of contaminants, e.g., metal ions, dyes, and other toxic pollutants. The review also summarized the main advantages and disadvantages of the different adsorbent materials. Specific attention was paid to the mechanism of adsorption, including chemisorption and physisorption mechanisms. In addition, the challenges and the future perspectives were identified to reach the optimal performance of the different adsorbents.

Modelling of methylene blue adsorption using peroxidase immobilized functionalized Buckypaper/polyvinyl alcohol membrane via ant colony optimization

Jicama peroxidase (JP) was covalently immobilized onto functionalized multi-walled carbon nanotube (MWCNT) Buckypaper/Polyvinyl alcohol (BP/PVA) membrane and employed for degradation of methylene blue dye. The parameters of the isotherm and kinetic models are estimating using ant colony optimization (ACO), which do not meddle the non-linearity form of the respective models. The proposed inverse modelling through ACO optimization was implemented, and the parameters were evaluated to minimize the non-linear error functions. The adsorption of MB dye onto JP-immobilized BP/PVA membrane follows Freundlich isotherm model (R² = 0.99) and the pseudo 1st order or 2nd kinetic model (R² = 0.980 & 0.968 respectively). The model predictions from the parameters estimated by ACO resulted values close the experimental values, thus inferring that this approach captured the inherent characteristics of MB adsorption. Moreover, the thermodynamic studies indicated that the adsorption was favourable, spontaneous, and exothermic in nature. The comprehensive structural analyses have confirmed the successful binding of peroxidase onto BP/PVA membrane, as well as the effective MB dye removal using immobilized JP membrane. Compared to BP/PVA membrane, the reusability test revealed that JP-immobilized BP/PVA membrane has better dye removal performances as it can retain 64% of its dye removal efficiency even after eight consecutive cycles. Therefore, the experimental results along with modelling results demonstrated that JP-immobilized BP/PVA membrane is expected to bring notable impacts for the development of effective green and sustainable wastewater treatment technologies.

Nanomaterials with Tailored Magnetic Properties as Adsorbents of Organic Pollutants from Wastewaters

Water quality has become one of the most critical issue of concern worldwide. The main challenge of the scientific community is to develop innovative and sustainable water treatment technologies with high efficiencies and low production costs. In recent years, the use of nanomaterials with magnetic properties used as adsorbents in the water decontamination process has received considerable attention since they can be easily separated and reused. This review focuses on the state-of-art of magnetic core–shell nanoparticles and nanocomposites developed for the adsorption of organic pollutants from water. Special attention is paid to magnetic nanoadsorbents based on silica, clay composites, carbonaceous materials, polymers and wastes. Furthermore, we compare different synthesis approaches and adsorption performance of every nanomaterials. The data gathered in this review will provide information for the further development of new efficient water treatment technologies.

Removal of Heavy Metal Ions Using Modified Celluloses Prepared from Pineapple Leaf Fiber

Since large amounts of pineapple leaves are abandoned after harvest in agricultural areas, the possibility of developing value-added products from them is of interest. In this work, cellulose fiber was extracted from pineapple leaves and modified with ethylenediaminetetraacetic acid (EDTA) and carboxymethyl (CM) groups to produce Cell-EDTA and Cell-CM, respectively, which were then used as heavy metal ion adsorbents. A solution of either lead ion (Pb2+) or cadmium ion (Cd2+) was used as wastewater for the purpose of studying adsorption efficiencies. The adsorption efficiencies of Cell-EDTA and Cell-CM were significantly higher than those of the unmodified cellulose in the pH range 1-7. Maximum adsorptions toward Pb2+ and Cd2+ were, for Cell-EDTA, 41.2 and 33.2 mg g-1, respectively, and, for Cell-CM, 63.4 and 23.0 mg g-1, respectively. The adsorption behaviors of Cell-CM for Pb2+ and Cd2+ fitted well with a pseudo-first-order model, but those of Cell-EDTA for Pb2+ and Cd2+ fitted well with a pseudo-second-order model. All of the adsorption behaviors could be described using the Langmuir adsorption isotherm. Desorption studies of Pb2+ and Cd2+ on both adsorbents using 1 M HCl suggested that regenerability of Cell-EDTA was, for both adsorbates, better than that of Cell-CM. Moreover, adsorption measurements in a mixture of Pb2+ and Cd2+ at various ratios showed that for both adsorbents the adsorption of Pb2+ was higher than that of Cd2+, while the adsorption selectivity for Pb2+ of Cell-CM was greater than that of Cell-EDTA. This study showed that the modified cellulosic adsorbents made from pineapple leaves were able to efficiently adsorb metal ions.

The Nanosized Dye Adsorbents for Water Treatment

Clean water is a vital element for survival of any living creature and, thus, crucially important to achieve largely and economically for any nation worldwide. However, the astonishingly fast trend of industrialization and population growth and the arisen extensive water pollutions have challenged access to clean water across the world. In this regard, 1.6 million tons of dyes are annually consumed. Thereof, 10%–15% are wasted during use. To decolorize water streams, there is an urgent need for the advanced remediation approaches involving utilization of novel materials and technologies, which are cost and energy efficient. Nanomaterials, with their outstanding physicochemical properties, can potentially resolve the challenge of need to water treatment in a less energy demanding manner. In this review, a variety of the most recent (from 2015 onwards) opportunities arisen from nanomaterials in different dimensionalities, performances, and compositions for water decolorization is introduced and discussed. The state-of-the-art research studies are presented in a classified manner, particularly based on structural dimensionality, to better illustrate the current status of adsorption-based water decolorization using nanomaterials. Considering the introduction of many newly developed nano-adsorbents and their classification based on the dimensionality factor, which has never been employed for this sake in the related literature, a comprehensive review will be presented.

Novel Superadsorbent Highly Porous Hydrogel Based on Arabic Gum and Acrylamide Grafts for Fast and Efficient Methylene Blue Removal

Environmental pollution with dyes released from industrial effluent is one of the major and most critical problems in the world. To alleviate this issue, advanced and safe materials with fast and highly efficient dye removal should be designed. Great attention has been paid recently to hydrogels based on polysaccharides such as Arabic Gum (AG) grafted with polyacrylamide (PAM) and polyacrylic acid (PAA). These materials combine the merits of natural polymers such as biodegradability and non-toxicity with the high adsorption ability of PAM and PAA towards cationic dyes such as methylene blue (MB). Many previous works have been done to enhance three-dimensional (3D) structure and swelling ability of the graft copolymers by using a crosslinking agent or even adding nanomaterials as a filler inside the hydrogel matrix. However, these additives may negatively affect the adsorption ability, and few previous studies could reach 2000 mg/g of maximum MB capacity removal within a good period of time. In our work, we synthesized partially hydrolyzed polyacrylamide grafted Arabic gum (AG-g-PAM/PAA) to have both amide and carboxylate groups. The modified water dissolved graft product undergoes water in oil (W/O) emulsion using paraffin oil as the continuous phase and Triton X-100 as a stabilizing agent; then, the system was inversed to oil in water (O/W) emulsion by increasing the shear mixing rate and cross-linked using Epichlorohydrin (ECH). The precipitated graft product showed hierarchically interconnected micro and macropores' sponge like shape with fast water swelling and high MB adsorption capacity (2300 mg g-1) after 45 min at near neutral pH conditions.

Adsorption of hexavalent chromium using modified walnut shell from solution

Modified walnut shell (MWS) was obtained using diethylenetriamine through a grafting reaction and its adsorption capacity toward Cr(VI) was enhanced. The adsorbent was characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and elemental analysis and the results showed that the modification was effective. To optimize experimental conditions, the effect of temperature, solution pH, salinity, contact time, and Cr(VI) concentration on adsorption quantity were performed in batch mode. It showed that the adsorption ability for Cr(VI) onto MWH can reach 50.1 mg·g^-1 at 303 K with solution pH 3. Both the solution pH and salinity had a great impact on the adsorption capacity. The Langmuir model can predict the equilibrium process while the pseudo-second-order model can describe the kinetic process. The Yan model can be used to predict the column process. Additionally, there was also some regeneration ability for Cr-loaded MWH. Consequently, MWS is effective for removing Cr(VI) from solution.

Novel cyclodextrin-based adsorbents for removing pollutants from wastewater: A critical review

Over the past few decades, cyclodextrin-based adsorbents have drawn worldwide attention as new-generation adsorbents for wastewater treatment due to its extraordinary physicochemical properties. This review outlined the recent development in the synthesis of cyclodextrin-based adsorbents as well as highlighted their applications in the removal of heavy metals, dyes, endocrine disrupting chemicals (EDCs), and mixed pollutants from water. The cross-linked and immobilized cyclodextrin-based adsorbents exhibited excellent adsorption performances. The removal of dyes and heavy metals were effectively controlled by ion exchanging, mainly depending upon the pH; while the adsorptions of EDCs always occurred in cyclodextrin cavities and pH-independent. An easier separation process between aqueous and adsorbents could be achieved compared to native cyclodextrin, which promoted the application of cyclodextrin-based adsorbents in practical industry. This review could provide an inspiration for the advanced study in the development of cyclodextrin-based adsorbents for high efficiency wastewater treatment.

Enhanced adsorption capacity of MgO/N-doped active carbon derived from sugarcane bagasse

MgO/N-doped active carbon (Mg/N-C) derived from sugarcane bagasse was prepared for the removal of methyl orange (MO). Mg/N-C composites presented the better adsorption capacity than that of active carbon and N-doped active carbon, of which the maximum adsorption capacity of 2-Mg/N-C-b2 for the MO removal is 384.61 mg g^-1. The effects of MgO dosage, N-doped content, pyrolysis temperature, pH value, inorganic ions and solution temperature on the adsorption performance of Mg/N-C composites in the MO removal were investigated in detail. The pseudo-second order model and Langmuir isotherm model fitted well with the adsorption kinetics and isotherms of Mg/N-C. The rate-determining step was the boundary diffusion and intra-particle diffusion. The adsorption process of 2-Mg/N-C-b2 was a spontaneous and physisorption process.

In Situ Synthesis and Characterization of ZnO/Chitosan Nanocomposite as an Adsorbent for Removal of Congo Red from Aqueous Solution

ZnO/chitosan nanocomposite was successfully synthesized by in-situ precipitation method. The material was characterized by XRD, FESEM, TEM, FTIR, BET, and TGA. Results show that ZnO/chitosan nanocomposite has spherical shape with the average size of 20–25 nm. BET surface area and the average pore size of ZnO/chitosan nanocomposite are 2.2436 (m2/g) and 12.2 nm, respectively. The material was applied as an adsorbent for congo red removal from aqueous solutions. The congo red adsorption is better described by the Langmuir model (R2=0.996) than by the Freundlich model (R2=0.962). Therefore, it can be presumed that congo red was adsorbed in a single monolayer with the theoretical maximum adsorption capacity of 227.3 (mg/g). This is comparable to other available adsorbents. It can be suggested that ZnO/chitosan nanocomposite could serve as promising adsorbent for congo red in wastewater treatment technology.

Tröger's base functionalized recyclable porous covalent organic polymer (COP) for dye adsorption from water

Tröger's base incorporated recyclable COP for acid dye removal from effluent.

Anionic azo dyes removal from water using amine-functionalized cobalt–iron oxide nanoparticles: a comparative time-dependent study and structural optimization towards the removal mechanism

Efficient and selective removal of azo dyes from water by amine-functionalized-CoFe₂O₄ nanoparticles reliant on structural features such as size, charge, hydrophobicity/hydrophilicity, and S/C atoms.

Facile synthesis of a BCN nanofiber and its ultrafast adsorption performance

Boron carbonitride (BCN) nanofibers with rapid and efficient adsorption performance were prepared by electrospinning technology. TEM, XRD, XPS and N₂ adsorption–desorption isotherms were performed to study the microstructure of the nanofibers. The results showed that the BCN fibers synthesized at 1000 °C (BCN-1000) have good crystallinity and high specific surface areas (403 m² g⁻¹). BCN-1000 nanofibers adsorb 70% of amino black 10B (AB-10B) within 10 minutes and reach adsorption equilibrium within 60 minutes. Compared with previous reports, it is found that the adsorption rate of BCN-1000 nanofibers to amino black (AB-10B) is much higher than that of other adsorbents. And BCN nanofibers exhibit a large adsorption capacity (625 mg g⁻¹). In addition, the process of AB-10B adsorption on BCN nanofibers was systematically investigated, which was in accordance with the pseudo-second-order kinetics model and Langmuir isotherm model.

Boron carbonitride (BCN) nanofibers with rapid and efficient adsorption performance were prepared by electrospinning technology.

A Bi2WO6/Ag2S/ZnS Z-scheme heterojunction photocatalyst with enhanced visible-light photoactivity towards the degradation of multiple dye pollutants

A novel visible-light-driven Z-scheme heterojunction, Bi2WO6/Ag2S/ZnS, was synthesized and its photocatalytic activity was evaluated for the treatment of a binary mixture of dyes, and its physicochemical properties were characterized using FT-IR, XRD, DRS and FE-SEM techniques. The Bi2WO6/Ag2S/ZnS Z-scheme heterojunctions not only facilitate the charge separation and transfer, but also maintain the redox ability of their components. The superior photocatalytic activity demonstrated by the Z-scheme Bi2WO6/Ag2S/ZnS attributes its unique properties such as the rapid generation of electron-hole pairs, slow recombination rate, and narrow bandgap. The performance of the Bi2WO6/Ag2S/ZnS was evaluated for the simultaneous degradation of methyl green (MG) and auramine-O (AO) dyes, while the influences of the initial MG concentration (4-12 mg L-1), initial AO concentration (2-6 mg L-1), pH (3-9), irradiation time (60-120 min) and photocatalyst dosage (0.008-0.016 g L-1) were investigated through the response surface methodology. The desirability function approach was applied to optimize the process and results revealed that maximum photocatalytic degradation efficiency was obtained at optimum conditions including 6.08 mg L-1 of initial MG concentration, 4.04 mg L-1 of initial AO concentration, 7.25 of pH, 90.58 min of irradiation time and 0.013 g L-1 of photocatalyst dosage. In addition, a possible photocatalytic mechanism of the Bi2WO6/Ag2S/ZnS heterojunction was proposed based on the photoinduced charge carriers.