Assembly dynamics of the bacterial MinCDE system and spatial regulation of the Z ring

Temperature sensitivity and cell division defects in an Escherichia coli strain with mutations in yghB and yqjA, encoding related and conserved inner membrane proteins

Ludox density gradients were used to enrich for Escherichia coli mutants with conditional growth defects and alterations in membrane composition. A temperature-sensitive mutant named Lud135 was isolated with mutations in two related, nonessential genes: yghB and yqjA. yghB harbors a single missense mutation (G203D) and yqjA contains a nonsense mutation (W92TGA) in Lud135. Both mutations are required for the temperature-sensitive phenotype: targeted deletion of both genes in a wild-type background results in a strain with a similar phenotype and expression of either gene from a plasmid restores growth at elevated temperatures. The mutant has altered membrane phospholipid levels, with elevated levels of acidic phospholipids, when grown under permissive conditions. Growth of Lud135 under nonpermissive conditions is restored by the presence of millimolar concentrations of divalent cations Ca(2+), Ba(2+), Sr(2+), or Mg(2+) or 300 to 500 mM NaCl but not 400 mM sucrose. Microscopic analysis of Lud135 demonstrates a dramatic defect at a late stage of cell division when cells are grown under permissive conditions. yghB and yqjA belong to the conserved and widely distributed dedA gene family, for which no function has been reported. The two open reading frames encode predicted polytopic inner membrane proteins with 61% amino acid identity. It is likely that YghB and YqjA play redundant but critical roles in membrane biology that are essential for completion of cell division in E. coli.

FtsZ bacterial cytoskeletal polymers on curved surfaces: the importance of lateral interactions

A recent theoretical article provided a mechanical explanation for the formation of cytoskeletal rings and helices in bacteria assuming that these shapes arise, at least in part, from the interaction of the inherent mechanical properties of the protein polymers and the constraints imposed by the curved cell membrane (Andrews, S., and A. P. Arkin. 2007. Biophys. J. 93:1872-1884). Due to the lack of experimental data regarding the bending rigidity and preferential bond angles of bacterial polymers, the authors explored their model over wide ranges of preferred curvature values. In this letter, we present the shape diagram of the FtsZ bacterial polymer on a curved surface but now including recent experimental data on the in vitro formed FtsZ polymers. The lateral interactions between filaments observed experimentally change qualitatively the shape diagram and indicate that the formation of rings over spirals is more energetically favored than estimated in the above-mentioned article.

Intracellular mobility of plasmid DNA is limited by the ParA family of partitioning systems

The highly conserved ParA family of partitioning systems is responsible for positioning DNA and protein complexes in bacteria. In Escherichia coli, plasmids that rely upon these systems are positioned at mid-cell and are repositioned at the quarter-cell positions after replication. How they remain fixed at these positions throughout the cell cycle is unknown. We use fluorescence recovery after photobleaching and time-lapse microscopy to measure plasmid mobility in living E. coli cells. We find that a minimalized version of plasmid RK2 that lacks its Par system is highly mobile, that the intact RK2 plasmid is relatively immobile, and that the addition of a Par system to the minimalized RK2 plasmid limits its mobility to that of the intact RK2. Mobility is thus the default state, and Par systems are required not only to position plasmids, but also to hold them at these positions. The intervention of Par systems is required continuously throughout the cell cycle to restrict plasmid movement that would, if unrestricted, subvert the segregation process. Our results reveal an important function for Par systems in plasmid DNA segregation that is likely to be conserved in bacteria.

Getting organized--how bacterial cells move proteins and DNA

In recent years, the subcellular organization of prokaryotic cells has become a focal point of interest in microbiology. Bacteria have evolved several different mechanisms to target protein complexes, membrane vesicles and DNA to specific positions within the cell. This versatility allows bacteria to establish the complex temporal and spatial regulatory networks that couple morphological and physiological differentiation with cell-cycle progression. In addition to stationary localization factors, dynamic cytoskeletal structures also have a fundamental role in many of these processes. In this Review, we summarize the current knowledge on localization mechanisms in bacteria, with an emphasis on the role of polymeric protein assemblies in the directed movement and positioning of macromolecular complexes.

Chapter 23: Stochastic modeling methods in cell biology

Stochastic methods have been a staple for understanding complex systems in chemistry and physics. In the biological context, they are useful for understanding phenomena ranging from molecular-level fluctuations to cellular movement. We review the basic formalism behind stochastic methods and outline how they can be implemented for quantifying gene expression, movement of molecular motors, and the dynamics of cytoplasmic components. We show that stochastic methods are quantitative checks for proposed molecular mechanisms and can pose new questions for experiments. Structural information of cellular components can be incorporated into stochastic models to reveal new biological insights.

Overview of cell shape: cytoskeletons shape bacterial cells

An evolving hypothesis is that bacterial cell shape is determined by cytoskeletal elements that localize peptidoglycan synthetic machineries. In most bacteria FtsZ assembles into the Z ring which recruits the machinery necessary for cytokinesis. Most rod shaped cells require MreB which assembles into cables that run between the poles of the cell and distribute various components of peptidoglycan metabolism along the cell length. Cells with other shapes have additional cytoskeletal elements that either localize synthetic machineries or possibly influence their activity.

Energetics and geometry of FtsZ polymers: nucleated self-assembly of single protofilaments

Essential cell division protein FtsZ is an assembling GTPase which directs the cytokinetic ring formation in dividing bacterial cells. FtsZ shares the structural fold of eukaryotic tubulin and assembles forming tubulin-like protofilaments, but does not form microtubules. Two puzzling problems in FtsZ assembly are the nature of protofilament association and a possible mechanism for nucleated self-assembly of single-stranded protofilaments above a critical FtsZ concentration. We assembled two-dimensional arrays of FtsZ on carbon supports, studied linear polymers of FtsZ with cryo-electron microscopy of vitrified unsupported solutions, and formulated possible polymerization models. Nucleated self-assembly of FtsZ from Escherichia coli with GTP and magnesium produces flexible filaments 4-6 nm-wide, only compatible with a single protofilament. This agrees with previous scanning transmission electron microscopy results and is supported by recent cryo-electron tomography studies of two bacterial cells. Observations of double-stranded FtsZ filaments in negative stain may come from protofilament accretion on the carbon support. Preferential protofilament cyclization does not apply to FtsZ assembly. The apparently cooperative polymerization of a single protofilament with identical intermonomer contacts is explained by the switching of one inactive monomer into the active structure preceding association of the next, creating a dimer nucleus. FtsZ behaves as a cooperative linear assembly machine.

The interactions of cell division protein FtsZ with guanine nucleotides

Prokaryotic cell division protein FtsZ, an assembling GTPase, directs the formation of the septosome between daughter cells. FtsZ is an attractive target for the development of new antibiotics. Assembly dynamics of FtsZ is regulated by the binding, hydrolysis, and exchange of GTP. We have determined the energetics of nucleotide binding to model apoFtsZ from Methanococcus jannaschii and studied the kinetics of 2'/3'-O-(N-methylanthraniloyl) (mant)-nucleotide binding and dissociation from FtsZ polymers, employing calorimetric, fluorescence, and stopped-flow methods. FtsZ binds GTP and GDP with K(b) values ranging from 20 to 300 microm(-1) under various conditions. GTP.Mg(2+) and GDP.Mg(2+) bind with slightly reduced affinity. Bound GTP and the coordinated Mg(2+) ion play a minor structural role in FtsZ monomers, but Mg(2+)-assisted GTP hydrolysis triggers polymer disassembly. Mant-GTP binds and dissociates quickly from FtsZ monomers, with approximately 10-fold lower affinity than GTP. Mant-GTP displacement measured by fluorescence anisotropy provides a method to test the binding of any competing molecules to the FtsZ nucleotide site. Mant-GTP is very slowly hydrolyzed and remains exchangeable in FtsZ polymers, but it becomes kinetically stabilized, with a 30-fold slower k(+) and approximately 500-fold slower k(-) than in monomers. The mant-GTP dissociation rate from FtsZ polymers is comparable with the GTP hydrolysis turnover and with the reported subunit turnover in Escherichia coli FtsZ polymers. Although FtsZ polymers can exchange nucleotide, unlike its eukaryotic structural homologue tubulin, GDP dissociation may be slow enough for polymer disassembly to take place first, resulting in FtsZ polymers cycling with GTP hydrolysis similarly to microtubules.

A comprehensive set of plasmids for vanillate- and xylose-inducible gene expression in Caulobacter crescentus

Caulobacter crescentus is widely used as a powerful model system for the study of prokaryotic cell biology and development. Analysis of this organism is complicated by a limited selection of tools for genetic manipulation and inducible gene expression. This study reports the identification and functional characterization of a vanillate-regulated promoter (P_van) which meets all requirements for application as a multi-purpose expression system in Caulobacter, thus complementing the established xylose-inducible system (P_xyl). Furthermore, we introduce a newly constructed set of integrating and replicating shuttle vectors that considerably facilitate cell biological and physiological studies in Caulobacter. Based on different narrow and broad-host range replicons, they offer a wide choice of promoters, resistance genes, and fusion partners for the construction of fluorescently or affinity-tagged proteins. Since many of these constructs are also suitable for use in other bacteria, this work provides a comprehensive collection of tools that will enrich many areas of microbiological research.

Z-ring force and cell shape during division in rod-like bacteria

The life cycle of bacterial cells consists of repeated elongation, septum formation, and division. Before septum formation, a division ring called the Z-ring, which is made of a filamentous tubulin analog, FtsZ, is seen at the mid cell. Together with several other proteins, FtsZ is essential for cell division. Visualization of strains with GFP-labeled FtsZ shows that the Z-ring contracts before septum formation and pinches the cell into two equal halves. Thus, the Z-ring has been postulated to act as a force generator, although the magnitude of the contraction force is unknown. In this article, we develop a mathematical model to describe the process of growth and Z-ring contraction in rod-like bacteria. The elasticity and growth of the cell wall is incorporated in the model to predict the contraction speed, the cell shape, and the contraction force. With reasonable parameters, the model shows that a small force from the Z-ring (8 pN in Escherichia coli) is sufficient to accomplish division.

A mechanical explanation for cytoskeletal rings and helices in bacteria

Several bacterial proteins have been shown to polymerize into coils or rings on cell membranes. These include the cytoskeletal proteins MreB, FtsZ, and MinD, which together with other cell components make up what is being called the bacterial cytoskeleton. We believe that these shapes arise, at least in part, from the interaction of the inherent mechanical properties of the protein polymers and the constraints imposed by the curved cell membrane. This hypothesis, presented as a simple mechanical model, was tested with numerical energy-minimization methods from which we found that there are five low-energy polymer morphologies on a rod-shaped membrane: rings, lines, helices, loops, and polar-targeted circles. Analytic theory was used to understand the possible structures and to create phase diagrams that show which parameter combinations lead to which structures. Inverting the results, it is possible to infer the effective mechanical bending parameters of protein polymers from fluorescence images of their shapes. This theory also provides a plausible explanation for the morphological changes exhibited by the Z ring in a sporulating Bacillus subtilis; is used to calculate the mechanical force exerted on a cell membrane by a polymer; and allows predictions of polymer shapes in mutant cells.