Electrokinetic separation of enantiomers using a capillary coated with poly-terguride

High-performance liquid chromatographic enantioseparations on capillary columns containing crosslinked polysaccharide phenylcarbamate derivatives attached to monolithic silica

Monolithic capillary columns containing native silica gel were covalently modified with 3,5-disubstituted phenylcarbamate derivatives of cellulose and amylose and applied for enantioseparations in capillary LC. The method previously used for covalent immobilization of polysaccharide phenylcarbamate derivatives onto the surface of microparticulate silica gel was successfully adapted for in situ modification of monolithic fused-silica capillary columns. The effects of the nature of polysaccharide and the substituents, as well as of multiple covalent immobilization of polysaccharide derivative on chromatographic performance of capillary columns were studied. The capillary columns obtained using this technique are stable in all solvents commonly used in LC and exhibit promising enantiomer resolving ability.

High-performance liquid chromatographic enantioseparations on capillary columns containing monolithic silica modified with amylose tris(3,5-dimethylphenylcarbamate)

Monolithic capillary columns containing native silica were modified by in situ coating with amylose tris(3,5-dimethylphenylcarbamate) and applied for enantioseparations in capillary liquid chromatography. Capillary columns were examined for 10 standard racemic compounds in order to compare the performance of monolithic silica columns with the common, 4.6mm I.D. high-performance liquid chromatographic columns packed with particulate silica. The effects of polysaccharide coating and of the linear velocity of the mobile phase on peak performance were studied. Enantioseparations with an analysis time below 1min were achieved for some chiral analytes.

High-performance liquid chromatographic enantioseparations on capillary columns containing monolithic silica modified with cellulose tris(3,5-dimethylphenylcarbamate)

Monolithic capillary columns containing native silica gel were modified with cellulose tris(3,5-dimethylphenylcarbamate) (CDMPC) and used for enantioseparations in capillary liquid chromatography. The method adopted for in situ enantioselective modification of monolithic fused silica capillary columns by coating with CDPMC appears to be fairly simple and fast. High efficiency enantioseparations of test racemic compounds and s(everal chiral drugs were achieved in a short time. It was possible to increase the amount of chiral selector present by multiple coating of monoliths with CDMPC. The baseline enantioseparation of 2,2,2-trifluoro-1-(9-anthryl)ethanol was achieved in an analysis time less than 30 s with this capillary column. In addition, reproducible enantioseparations were obtained when the chiral selector was removed from the monolithic column by flushing it with appropriate solvent and the column recoated.

Enantiomer separation by countercurrent chromatography using cinchona alkaloid derivatives as chiral selectors

Cinchona-derived anion-exchange-type chiral selectors have been adapted and employed in countercurrent chromatography (CCC) for the separation of enantiomers of N-derivatized amino acids and 2-aryloxypropionic acids. The accurate optimization of the enantioseparation in terms of solvent system composition, pH values, ionic strength, and CCC operating conditions was performed. A wide range of solvent mixtures was evaluated. Successful resolutions were achieved in systems such as ammonium acetate buffer/tert-amyl alcohol/methanol/heptane and especially ammonium acetate buffer/methyl isobutyl ketone or diisopropyl ether. Up to 300 mg (0.92 mmol) of N-(3,5-dinitrobenzoyl)-(+/-)-leucine was totally resolved in a single run using a 10 mM concentration of chiral selector in 122 mL of stationary phase. This amount could be increased up to 900 mg (2.77 mmol) when pH-zone-refining mode was applied. The results here presented account for the high potential of CCC as a preparative enantiomer separation technique.

Enantioseparations by capillary electrochromatography

The review summarizes recent developments in enantioseparations by capillary electrochromatography (CEC). Selected fundamental aspects of CEC are discussed in order to stress those features which may allow the success of this technique in the competitive field of enantioseparations. In addition, the comparative characteristics of the different modes of chiral CEC and the stationary phases are presented. The effects of the characteristics of the stationary and liquid phases and operational conditions on the separation results are discussed. Finally, some future trends are briefly addressed.

Enantioseparations in capillary electromigration techniques: recent developments and future trends

This review summarizes the current status of enantioseparations using capillary electromigration techniques and gives the authors insights on the selected fundamental aspects and future trends in this field. The most recent developments in the field of chiral separations using capillary electrophoresis (CE) and capillary electrochromatography (CEC) are summarized. The status of chiral electromigration techniques is evaluated tacking into account the most recent developments in related techniques such as chiral HPLC, GC and SFC.

Recent progress in enantiomer separation by capillary electrochromatography

Enantiomer separation by electrochromatography (CEC) can be performed in three modes: (i) open-tubular capillary electrochromatography (o-CEC), in which the chiral selector is physically adsorbed coated, and thermally immobilized or covalently attached to the internal capillary wall; (ii) packed capillary electrochromatography (p-CEC), in which the capillary is either filled with chiral modified silica particles or with an achiral packing material, and a chiral selector is added to the mobile phase; and (iii) monolithic (rod)-capillary electrochromatography (rod-CEC) in which the chiral stationary phase (CSP) consists of a single piece of porous solid. We present an overview on methods and new trends in the field of electrochromatographic enantiomer separation such as CEC with either nonaqueous mobile phases or stationary phases with incorporated permanent charges, or with packing beds consisting of nonporous silica particles or particles with very small internal diameters.

Recent progress in chiral separation principles in capillary electrophoresis

This review summarizes recent developments in the field of chiral separations by electromigration techniques including capillary zone electrophoresis (CZE), capillary gel electrophoresis (CGE), isotachophoresis (ITP), electrokinetic chromatography (EKC), and capillary electrochromatography (CEC). This overview focuses on the development of new chiral selectors and the introduction of new techniques rather than applications of already established selectors and methods. The mechanisms of the different chiral separation principles are discussed.

Chiral monolithic columns for enantioselective capillary electrochromatography prepared by copolymerization of a monomer with quinidine functionality. 2. Effect of chromatographic conditions on the chiral separations

The effect of chromatographic conditions on the performance of chiral monolithic poly(O-[2-(methacryloyloxy)-ethylcarbamoyl]-10,11-dihydroqui nidine-co-ethylene dimethacrylate-co-2-hydroxyethyl methacrylate) columns in the capillary electrochromatography of enantiomers has been studied. The flow velocity was found to be proportional to the pore size of the monolith and both the pH and the composition of the mobile phase. The length of both open and monolithic segments of the capillary column was found to exert a substantial effect on the run times. The use of monoliths as short as 8.5 cm and the "short-end" injection technique enabled the separations to be achieved in approximately 5 min despite the high retentitivity of the quinidine selector. Very high column efficiencies of close to 250000 plates/m and good selectivities were achieved for the separations of numerous enantiomers using the chiral monolithic capillaries with the optimized chromatographic conditions.

Enantiomer separation by capillary electrochromatography on a cyclodextrin-modified monolith

A chiral monolithic stationary phase was prepared by packing a capillary with bare porous silica and sintering the silica bed at high temperature. The resulting silica monolith was polymer-coated with Chirasil-Dex, a permethylated beta-cyclodextrin covalently linked via an octamethylene spacer to dimethylpolysiloxane. Subsequently, Chirasil-Dex was thermally immobilized on the silica support and a chiral monolith of very high stability (30 kV, more than 400 bar pressure) was obtained. The enantiomer separation of various chiral compounds by monolithic (rod) capillary electrochromatography (rod-CEC) was feasible. This method was compared with capillary liquid chromatography (LC) in a single-column mode using unified equipment. About two to three times higher efficiency was found in the rod-CEC mode as compared to rod-LC. The influence of pressure-driven flow support on efficiency, resolution, elution time and baseline stability was investigated. The amount and nature of organic modifier strongly influences efficiency and resolution.

Enantiomer separation of chiral pharmaceuticals by capillary electrochromatography

Enantiomer separation of chiral pharmaceuticals by capillary electrochromatography (CEC) is achieved with open-tubular capillaries (o-CEC), with packed capillaries (p-CEC) or with monolithic capillaries. In o-CEC, capillaries are coated with a thin film containing cyclodextrin derivatives, cellulose, proteins, poly-terguride or molecularly imprinted polymers as chiral selectors. In p-CEC, typical chiral HPLC stationary phases such as silica-bonded cyclodextrin or cellulose derivatives, proteins, glycoproteins, macrocyclic antibiotics, quinine-derived and 'Pirkle' selectors, polyacrylamides and molecularly imprinted polymers are used as chiral selectors. Chiral monolithic stationary phases prepared by in situ polymerization into the capillary were also developed for electrochromatographic enantiomer separation.