Comparative studies on the interaction of proteins with a polydimethylsiloxane elastomer. II. The comparative antigenicity of primary and secondarily adsorbed IgG1 and IgG2a and their non-adsorbed counterparts

HistoFlex--a microfluidic device providing uniform flow conditions enabling highly sensitive, reproducible and quantitative in situ hybridizations

A microfluidic device (the HistoFlex) designed to perform and monitor molecular biological assays under dynamic flow conditions on microscope slide-substrates, with special emphasis on analyzing histological tissue sections, is presented. Microscope slides were reversibly sealed onto a cast polydimethylsiloxane (PDMS) insert, patterned with distribution channels and reaction chambers. Topology optimization was used to design reaction chambers with uniform flow conditions. The HistoFlex provided uniform hybridization conditions, across the reaction chamber, as determined by hybridization to microscope slides of spotted DNA microarrays when applying probe concentrations generally used in in situ hybridization (ISH) assays. The HistoFlex's novel ability in online monitoring of an in situ hybridization assay was demonstrated using direct fluorescent detection of hybridization to 18S rRNA. Tissue sections were not visually damaged during assaying, which enabled adapting a complete ISH assay for detection of microRNAs (miRNA). The effects of flow based incubations on hybridization, antibody incubation and Tyramide Signal Amplification (TSA) steps were investigated upon adapting the ISH assay for performing in the HistoFlex. The hybridization step was significantly enhanced using flow based incubations due to improved hybridization efficiency. The HistoFlex device enabled a fast miRNA ISH assay (3 hours) which provided higher hybridization signal intensity compared to using conventional techniques (5 h 40 min). We further demonstrate that the improved hybridization efficiency using the HistoFlex permits more complex assays e.g. those comprising sequential hybridization and detection of two miRNAs to be performed with significantly increased sensitivity. The HistoFlex provides a new histological analysis platform that will allow multiple and sequential assays to be performed under their individual optimum assay conditions. Images can subsequently be recorded either in combination or sequentially through the ability of the HistoFlex to monitor assays without disassembly.

Streptavidin-coated spot surfaces for sensitive immunoassays using fluorescence surface readout

Direct measurement of time-resolved fluorescence from a washed surface of an immunoassay well constitutes an advantage compared with label development options involving signal generation in solution. Epi-fluorometric detection collects the signal from only a small part of the microtiter well's bottom surface and it is inadequate for the optimal assay sensitivity when using binding surfaces introduced by large coating volume. This study reports on the use of streptavidin-coated spots intended to condense the binding of the labeled antibodies to coincide with the excitation beam. The spots were generated in special microtiter wells containing 2.5-mm, 3.5-mm, and 4.5-mm diameter indentations by adsorption from liquid droplets containing either native (SAv) or modified high-capacity (GA-SAv) streptavidin. The SAv-coated and GA-SAv-coated spots exhibited maximum Eu-biotin binding densities of 0.080 and 0.47 pmol/mm(2), respectively. A sandwich-type immunoassay of thyroid-stimulating hormone (TSH) provided a fivefold to sixfold increase in the signal-to-background ratios of the spot assay and an equivalent improvement in the detection limit (DL < 0.01 mU/L) compared with a reference assay.

Solid supports in enzyme-linked immunosorbent assay and other solid-phase immunoassays

A very large proportion of modern immunoassays involve the use of synthetic solid phases to immobilize one of the reactants. These solid-phase immunoassays (SPIs) therefore involve ligand-receptor interactions that occur within a reaction volume close to the solution/solid phase interface. As a consequence, the immunochemistry/biochemistry of these ligand-receptor interactions differs from that of their counterparts in solution. Furthermore, the immobilization process can significantly alter the biological activity of the reactant; most adsorbed proteins on polystyrene or silicone are partially or largely denatured. Therefore the use of alternative methods of immobilization is attractive but may result in little increase in the amount of total functional reactant. However, all commonly used solid phases do not have the same properties or the same capacity for reactant immobilization or experience the same level of nonspecific binding. Empiricism plays a major role in SPIs. Derivations of mass law equations for measuring the antigen capture of solid-phase antibodies, for determining the affinity of solid phase for protein adsorption, and for estimating antibody affinity are reviewed.

Comparative studies on the interaction of proteins with a polydimethylsiloxane elastomer. I. Monolayer protein capture capacity (PCC) as a function of protein pl, buffer pH and buffer ionic strength

Polydimethylsiloxane (PEP) is widely used in medical prostheses and therefore is in contact with plasma and secretory proteins. Two pair of globular proteins, lactoferrin (Lf) and transferrin (Trf), and bovine IgG1 and IgG2a, which differ substantially between pair members in their pl, were used to study the interaction of a PEP widely used in breast implants and soluble protein. Studies were done using iodinated proteins over a concentration range that resulted in an apparent protein monolayer. Secondary incubations with dilute protein solutions were needed to form the monolayer on PEP, possibly as a consequence of micro air bubbles trapped on its highly textured surface as shown by atomic force microscopy. Immunoassay quality polystyrene microtiter wells were used as controls. Adsorption studies were routinely performed at pH 4, 7 and 10 and at ionic strengths corresponding to 0.95, 9.5 and 90.0 mS. The protein capture capacity (PCC) of PEP for Lf and Trf was optimal at physiological pH and ionic strength and comparable under these conditions to that of Immulon 2 (Imm 2) microtiter wells. While increasing the ionic strength and pH further increases the PCC of Imm 2 for Lf and Trf, this markedly lowered the PCC of PEP for these proteins suggesting that initial polar interactions may precede subsequent hydrophobic bonding to PEP. This was tested using a hydrophilic variant of PEP, which when tested in a 90.0 mS buffer, showed a > five-fold lower PCC at neutral and alkaline pH. The greatly reduced PCC of the hydrophilic variant might also suggest that hydrophilic variants of silicone would be more biocompatible than those currently used. The PCC of PEP for the IgGs was less than that of Imm 2 but still optimal at physiological conditions. Consistent with the data on Lf/Trf, PCC progressively decreased with increasing ionic strength at alkaline pH. Differences in pl between the protein pairs had only a marginal effect on the PCC of PEP. Monolayer adsorption on both PEP and Imm 2 was slowly reversible and greater in the presence of free ligand (< 2% in 16 h) suggesting that the process follows Mass Law principles. However, even in the presence of non-ionic detergent and free ligand, 85-90% remained bound on either surface. Thus, desorption of proteins in the monolayer should not complicate subsequent immunochemical studies conducted on adsorbed monolayers.