Gradient elution capillary electrochromatography and hyphenation with nuclear magnetic resonance

On-line SEC-MR-NMR hyphenation: optimization of sensitivity and selectivity on a 62 MHz benchtop NMR spectrometer

The development of sophisticated synthetic routes for polymeric materials and more complex formulation used in current polymers require more advanced analytical techniques. A direct correlation between molar mass distribution and chemical composition is provided.

Assessing 2D electrophoretic mobility spectroscopy (2D MOSY) for analytical applications

Electrophoretic displacement of charged entity phase modulates the spectrum acquired in electrophoretic NMR experiments, and this modulation can be presented via 2D FT as 2D mobility spectroscopy (MOSY) spectra. We compare in various mixed solutions the chemical selectivity provided by 2D MOSY spectra with that provided by 2D diffusion-ordered spectroscopy (DOSY) spectra and demonstrate, under the conditions explored, a superior performance of the former method. 2D MOSY compares also favourably with closely related LC-NMR methods. The shape of 2D MOSY spectra in complex mixtures is strongly modulated by the pH of the sample, a feature that has potential for areas such as in drug discovery and metabolomics. Copyright © 2016 The Authors. Magnetic Resonance in Chemistry published by John Wiley & Sons Ltd.

Pharmaceutical impurities and degradation products: uses and applications of NMR techniques

Current standards and regulations demand the pharmaceutical industry not only to produce highly pure drug substances, but to achieve a thorough understanding of the impurities accompanying their manufactured drug substances and products. These challenges have become important goals of process chemistry and have steadily stimulated the search of impurities after accelerated or forced degradation procedures. As a result, impurity profiling is one of the most attractive, active and relevant fields of modern pharmaceutical analysis. This activity includes the identification, structural elucidation and quantitative determination of impurities and degradation products in bulk drugs and their pharmaceutical formulations. Nuclear magnetic resonance (NMR) spectroscopy has evolved into an irreplaceable approach for pharmaceutical quality assessment, currently playing a critical role in unequivocal structure identification as well as structural confirmation (qualitative detection), enabling the understanding of the underlying mechanisms of the formation of process and/or degradation impurities. NMR is able to provide qualitative information without the need of standards of the unknown compounds and multiple components can be quantified in a complex sample without previous separation. When coupled to separative techniques, the resulting hyphenated methodologies enhance the analytical power of this spectroscopy to previously unknown levels. As a result, and by enabling the implementation of rational decisions regarding the identity and level of impurities, NMR contributes to the goal of making better and safer medicines. Herein are discussed the applications of NMR spectroscopy and its hyphenated derivate techniques to the study of a wide range pharmaceutical impurities. Details on the advantages and disadvantages of the methodology and well as specific challenges with regards to the different analytical problems are also presented.

CEC of phytochemical bioactive compounds

Although there are many publications related to technological or methodological developments of CEC, few focus on the analysis of natural products, especially phytochemical bioactive compounds. This review summarized the application of CEC in the analysis of phytochemical bioactive components, including flavonoids, nucleosides, steroids, lignans, quinones and coumarins, as well as fingerprint analysis of herbs. The strategies for optimization of CEC conditions and detection were also discussed.

Nuclear magnetic resonance coupled microseparations

The increased separation efficiency afforded by reducing the size of the separation column has resulted in 'microseparations' becoming an important component in many chemical and biochemical applications. The coupling of microseparations with NMR detection is an area of increasing interest owing to the high structural information of NMR. In order to couple efficiently with the separation, the NMR detector must be reduced in size to correspond to that of the separation peak. This paper summarizes some of the approaches used in coupling NMR detection with pressure-driven and electrophoretic microseparations, the design of small NMR detectors and applications of this technology.

Microcoil nuclear magnetic resonance spectroscopy

In comparison with most analytical chemistry techniques, nuclear magnetic resonance has an intrinsically low sensitivity, and many potential applications are therefore precluded by the limited available quantity of certain types of sample. In recent years, there has been a trend, both commercial and academic, towards miniaturization of the receiver coil in order to increase the mass sensitivity of NMR measurements. These small coils have also proved very useful in coupling NMR detection with commonly used microseparation techniques. A further development enabled by small detectors is parallel data acquisition from many samples simultaneously, made possible by incorporating multiple receiver coils into a single NMR probehead. This review article summarizes recent developments and applications of "microcoil" NMR spectroscopy.

Determination of caffeine and its metabolites in urine by capillary electrophoresis-mass spectrometry

The caffeine content of foods and beverages varies considerably, interfering with our ability to obtain valid interpretations in many human studies with regard to the mechanism of action(s) of caffeine and/or its metabolites. The rate of metabolism of caffeine and other xanthine drugs also varies greatly from one individual to another. Therefore, it is extremely important to develop accurate, reliable analytical methods to quantify caffeine and its metabolites in simple and complex matrixes. A simple method is described for the separation and characterization of caffeine and its major metabolites employing capillary electrophoresis (CE) coupled to ultraviolet-absorption and mass spectrometry (MS) detection. After optimization of the electrophoresis separation conditions, a reliable separation of caffeine and 11 of its major metabolites was achieved in 50 mM ammonium carbonate buffer, pH 11.0. The volatile aqueous electrolyte system used with a normal electroosmotic flow polarity also provided an optimal separation condition for the characterization of the analytes by MS. The CE method achieved baseline resolution for all 12 compounds in less than 30 min. The CE-MS method is suitable for use as a routine procedure for the rapid separation and characterization of caffeine and its metabolites. The usefulness of this method was demonstrated by the extraction, separation, and identification of caffeine and its 11 metabolites from normal urine samples. The urine specimens were first acidified to obtain optimum binding efficiency to the sorbents of the off-line, solid-phase extraction procedure employed here, and an acidified eluent solvent was employed for the desorption step to maximize the recovery of the bound analytes.

Review coupling of capillary electrochromatography to mass spectrometry

This review discusses the development of capillary electrochromatography (CEC) coupled to mass spectrometric (MS) detection over the last few years. Major topics addressed are instrumental setups employed and applications of this technology published in the recent literature. The instrumental section includes a discussion of the most commonly used interfaces for the hyphenation of CEC and MS as well as ionization techniques. Applications reviewed in this paper come from a variety of different fields such as the analysis of biomolecules like proteins, peptides, amino acids or carbohydrates, chiral separations or the analysis of pharmaceutical an their metabolites in a series of matrices.

Comparative analysis of a neurotoxin from Calliostoma canaliculatum by on-line capillary isotachophoresis/1H NMR and diffusion 1H NMR

NMR spectroscopy has been coupled on-line to capillary isotachophoresis (cITP) to enhance structural analyses of dilute charged species through separation and sample concentration. Microcoils, the most mass-sensitive NMR probes available, provide optimal detection for cITP/NMR. To evaluate the utility of cITP/NMR for natural product analysis, a homogenate of the hypobranchial gland from the marine snail Calliostoma canaliculatum containing a cationic neurotoxin (1, a disulfide-bonded dimer of 6-bromo-2-mercaptotryptamine) was studied. For comparison, hypobranchial gland homogenate was also examined by diffusion-NMR, an alternative approach for NMR mixture analysis. cITP/NMR concentrated the neurotoxin by almost 20-fold and isolated it from some of the other components present in the matrix. However, a minor component, likely a precursor or degradant, co-migrated with compound 1. Diffusion-NMR also did not resolve the two, indicating that the compounds possessed similar diffusion coefficients and electrophoretic mobilities. The strengths and limitations of the two approaches for NMR mixture analysis are discussed.

Dual Microcoil NMR Probe Coupled to Cyclic CE for Continuous Separation and Analyte Isolation

Capillary electrophoresis (CE)-nuclear magnetic resonance (NMR) spectroscopy combines the separation efficiency of CE and the information-rich detection capabilities of NMR. However, the temporally narrow CE peaks reduce NMR sensitivity and prevent on-line multidimensional NMR acquisitions. In this work, cyclic CE with multicoil NMR instrumentation is developed to perform CE in multiple closed loops. As a proof of concept, a two-loop five-junction capillary configuration creates two connected yet independently operable fluidic loops. With appropriate voltage switching, analytes can be directed as desired around or between the loops, and a particular analyte band can be parked in one NMR detector coil while CE continues in the second loop and monitored with a second NMR detector coil. The separation of a mixture of amino acids (Ala, Val, Thr) is achieved in two cycles. After one CE cycle, Ala is separated and COSY data are recorded in one loop while Val and Thr are separated in the second loop. At the end of the second cycle, both Val and Thr are separated and multidimensional NMR spectra acquired. With this instrumentation and appropriate protocols, two-dimensional NMR data acquisition and CE separation are achieved simultaneously.

Monolithic columns with a gradient of functionalities prepared via photoinitiated grafting for separations using capillary electrochromatography

Stationary phases for capillary electrochromatography with a longitudinal gradient of functionalities have been prepared via photoinitiated grafting of polymer chains onto the pore surface of a porous polymer monolith. In order to achieve the desired retention and electroosmotic flow, the hydrophobic poly(butyl methacrylate-co-ethylene dimethacrylate) monolith with optimized porous properties was grafted with a layer of ionizable polymer, poly(2-acrylamido-2-methyl-1-propanesulfonic acid). A moving shutter and a neutral density filter were used to control the dose of UV light received at different locations along the monolith in order to create the longitudinal gradient of functionalities. Formation of the desired gradients was confirmed using electron probe microanalysis of different locations along the column. The preparation technique significantly affects performance in the CEC mode as demonstrated on the separations of a model mixture using columns both with homogeneous distribution of grafts and with a gradient of functionality. Columns grafted with the gradient of functionalities were found superior to those functionalized uniformly. A comparison of the performance of the gradient column with another containing evenly distributed functionalities showed the performance benefits of the "gradient" column.

LC-NMR-MS in drug discovery

Nuclear magnetic resonance spectroscopy (NMR) is arguably the most versatile analytical platform for complex mixture analysis. Specifically, interfacing liquid chromatography with parallel NMR and mass spectrometry (LC-NMR-MS) gives comprehensive structural data on metabolites of novel drugs in development. Applications in natural product, combinatorial chemistry and drug metabolism studies are reviewed. Microcoil probes and capillary separation methods have enormous potential. Recent innovations to improve NMR detection limits include CryoFlowProbes and on-line solid-phase extraction (LC-SPE-NMR). These state-of-the-art analytical platforms are widely applicable to identifying novel candidate drugs from diverse complex mixtures within a drug discovery strategy.

Hyphenation of capillary separations with nuclear magnetic resonance spectroscopy

The hyphenation of small-volume separations to information-rich detection offers the promise of unmatched analytical information on the components of complex mixtures. Nuclear magnetic resonance (NMR) spectroscopy provides information about molecular structure, although sensitivity remains an issue for on-line NMR detection. This is especially true when hyphenating NMR to capillary separations as the observation time and analyte mass are decreased to the point where reduced information is obtained from the eluting analytes. Because of these limitations, advances in instrumental performance have a large impact on the overall performance of a separation-NMR system. Instrumental aspects and the capabilities of cLC-NMR, CEC-NMR and CE-NMR are reviewed, and applications that have used this technology highlighted. Recent trends towards small volume capillary scale separations are emphasized, as is the recent success of capillary-isotachophoresis (cITP)-NMR.

Spectral restoration from low signal-to-noise, distorted NMR signals: application to hyphenated capillary electrophoresis-NMR

In capillary electrophoresis separations coupled to NMR signal detection using small solenoidal coils, electrophoretic currents cause substantial distortion in the NMR spectral linewidths and peak heights, distortions which cannot be fully counteracted through shimming. The NMR spectra also have a low signal-to-noise ratio due to the small amounts of material, typically <1nmol, associated with such microseparations. This study proposes a two-step, signal processing method to restore spectral lines from the distorted NMR spectrum. First, a reference signal is acquired to estimate the broadening function, as a combination of several Lorentzian functions, using a gradient descent method. Then multi-resolution wavelet analysis is applied to the distorted spectrum to determine an initial estimate of the frequencies of the spectral lines. Convergence to the final spectrum, a second set of Lorentzians, involves deconvolution with the estimated broadening function using a gradient descent method. Experimental CE-NMR data show that considerable improvements in spectral quality are possible using this approach, although fine splittings can not be resolved if the broadening function is large.

NMR detection with multiple solenoidal microcoils for continuous-flow capillary electrophoresis

Nuclear magnetic resonance (NMR) spectroscopy represents a promising on-line detector for capillary electrophoresis (CE). The inherent poor sensitivity of NMR mandates the use of NMR probes with the highest mass sensitivity, such as those containing solenoidal microcoils, for CE/NMR hyphenation. However, electrophoretic current degrades the resolution of NMR spectra obtained from solenoidal coils. A new method to avoid microcoil NMR spectral degradation during continuous-flow CE is demonstrated using a unique multiple solenoidal coil NMR probe. The electrophoretic flow from a single separation capillary is split into multiple outlets, each possessing its own NMR detection coil. While the CE electrophoretic flow is directed through one outlet, stopped-flow, high-resolution NMR spectra are obtained from the coil at the other outlet. The electrophoretic flow and NMR measurements are cycled between the outlets to allow a continuous CE separation with "stopped-flow" detection. As a new approach for improving multiple coil probe performance, the magnetic field homogeneity is automatically adjusted (via the shim coils of the magnet) for the active coil. The multiple microcoil CE/NMR coupling has been used to analyze a <3 nmole mixture of amines while obtaining between 1 and 2 Hz line width, demonstrating the ability to avoid electrophoretic current-induced line broadening.

Microscale NMR

NMR spectroscopy is increasingly being used to characterize microliter and smaller-volume samples. Substances at picomole levels have been identified using NMR spectrometers equipped with microcoil-based probes. NMR probes that incorporate multiple sample chambers enable higher-throughput NMR experiments. Hyphenation of capillary-scale separations and microcoil NMR has also decreased analysis time of mixtures. For example, capillary isotachophoresis/NMR allows the highest mass sensitivity nanoliter-volume flow cells to be used with low microliter volume samples because isotachophoresis concentrates the microliter volume sample into the nanoliter volume NMR detection probe. In addition, the diagnostic capabilities of NMR spectroscopy allow the physico-chemical aspects of a capillary separation process to be characterized on-line. Because of such advances, the application of NMR to smaller samples continues to grow.

High-resolution capillary tube NMR. A miniaturized 5-microL high-sensitivity TXI probe for mass-limited samples, off-line LC NMR, and HT NMR

A new triple-resonance (TXI) (1H, 13C, 15N) high-resolution nuclear magnetic resonance (NMR) capillary probe with 2.5-microL NMR-active sample volume (V(obs)) was built and tested for applications with mass- and volume-limited samples and for coupling of microbore liquid chromatography to NMR. This is the first microliter probe with optimized coil geometry for use with individual capillary tubes with an outer diameter of 1 mm. The 90 degree pulse lengths of the 1-mm microliter probe were below 2 micros for proton, below 8 micros for carbon, and below 20 micros for nitrogen, and a spectral line width at signal half-height below 1 Hz was obtained. Compared to a conventional 5-mm probe, the new 600-MHz 1-mm TXI microliter probe with z-gradient shows an increase in mass sensitivity by a factor of 5, corresponding to a 25-fold reduction in measuring time. The consumption of costly deuterated solvent is reduced by at least 2 orders of magnitude. The 1-mm TXI microliter probe with z-gradient allows the measurement of one-dimensional 1H NMR and two-dimensional heteronuclear NMR spectra with a few nanomoles (micrograms) of compound with high sensitivity, speed, and quality. This is a breakthrough for discrete sample NMR spectroscopy with paramount importance for structure elucidation in natural compound chemistry and metabolic research. It offers also advantages for linking chromatographic methods to NMR in a nindustrial environment. Capillary tube NMR may find new applications in areas where high sample throughput is essential, e.g., in the quality control of large sample arrays from parallel chemistry, screening, and compound depositories. It has the potential to increase the sample throughput by 1 order of magnitude or more if new hardware for fast sample handling and exchange becomes available.

Fundamentals of capillary electrochromatography: migration behavior of ionized sample components

The mechanism of separating charged species by capillary electrochromatography (CEC) was modeled with the conditions of ideal/linear chromatography by using a simple random walk. The most novel aspect of the work rests with the assumption that in sufficiently high electric field ionized sample components can also migrate in the adsorbed state on the ionized surface of the stationary phase. This feature of CEC leads to the introduction of three dimensionless parameters: alpha, reduced mobility of a sample component with the electrosmotic mobility as the reference; beta, the CEC retention factor; and gamma, the ratio of the electrophoretic migration velocity and the velocity of surface electrodiffusion. Since the interplay of retentive and electrophoretic forces determines the overall migration velocity, the separation mechanism in CEC is governed by the relative importance of the above parameters. The model predicts conditions under which the features of the CEC system engender migration behavior that manifests itself in a relatively narrow elution window and in a gradient like elution pattern in the separation of peptides and proteins by using pro forma isocratic CEC. It is believed that such elution patterns, which resemble those obtained by the use of external gradient of the eluent, are brought about by the formation of an internal gradient in the CEC system that gave rise to concomitant peak compression. The peculiarities of CEC are discussed in the three operational modalities of the technique: co-current, countercurrent, and co-counter CEC. The results suggest that CEC, which is often called "liquid chromatography on electrophoretic platform" is an analytical tool with great potential in the separation of peptides and proteins.

Recent advances in capillary electrophoresis of peptides

The article gives a comprehensive review on the recent developments in the applications of high-performance capillary electromigration methods, including zone electrophoresis, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography and electrochromatography, to analysis, preparation and physicochemical characterization of peptides. The article presents new approaches to the theoretical description and experimental verification of electromigration behavior of peptides, and covers the methodological aspects of capillary electroseparations of peptides, such as strategy and rules for the rational selection of separation mode and experimental conditions, sample treatment, suppression of peptide adsorption to the inner capillary wall, new developments in individual separation modes and new designs of detection systems. Several types of applications of capillary electromigration methods to peptide analysis are presented: conventional qualitative and quantitative analysis for determination of purity, determination in biomatrices, monitoring of physical and chemical changes and enzymatic conversions, amino acid and sequence analysis and peptide mapping of proteins. Some examples of micropreparative peptide separations are given and capabilities of capillary electromigration techniques to provide important physicochemical characteristics of peptides are demonstrated.

Influence of pressure upon coupling pressurized capillary electrochromatography with nuclear magnetic resonance spectroscopy

In this work, the influence of supplementary pressure on the separation efficiency of pressurized capillary electrochromatography (pCEC) was examined. At low pressures of up to 30 bar, which is more than sufficient to prevent bubble formation, no significant loss in separation efficiency is observed. Even at 100 bar, the efficiency of pCEC is still significantly better than without application of an electric field. In addition, analysis times are drastically reduced compared to both capillary electrochromatography (CEC) and capillary HPLC. On the basis of these results, an improved interface for capillary NMR coupling is described and used for the separation and identification of a mixture of unsaturated fatty acid methyl esters. Under these conditions, the analysis time could be shortened by up to a factor of 10 when pCEC is coupled to NMR spectroscopy.

Union of capillary high-performance liquid chromatography and microcoil nuclear magnetic resonance spectroscopy applied to the separation and identification of terpenoids

This paper describes the first coupling of a commercial capillary HPLC system with a diode array spectrophotometric detector and a custom-built nuclear magnetic resonance (NMR) flow microprobe. The eluent from a 3-microm diameter C18 HPLC column is linked to a 500 MHz 1H-NMR microcoil probe with an observe volume of 1.1 microl. The separation and structurally-rich detection of a mixture of terpenoids under both isocratic and gradient solvent elution conditions is presented. The lowest limits of detection yet reported for capillary HPLC on-line measurement (i.e., 37 ng for alpha-pinene) are achieved with this system. The complementary nature of diode array and NMR detection allows stopped-flow data collection from analytes which would otherwise go unnoticed in continuous-flow NMR. Moreover, stopped-flow NMR data is presented for the detection of a trace (sub-nmol) impurity in the sample mixture. Since NMR signals degrade and shift during solvent gradients, flow injection analysis studies are conducted with injected solvent plugs differing in mobile phase composition. The NMR signal degradation accompanying these injections is largely due to the variance in chemical shift with the solvent composition rather than to changes in magnetic susceptibility of the solvent. Characterization of such effects enables the development of improved NMR probes for the coupling of capillary HPLC and NMR.

Recent progress in capillary electrochromatography

Capillary electrochromatography (CEC) continues to captivate many separation scientists. A remarkable activity is apparent from the numerous publications in the literature using CEC. A review of the most recent progress in CEC is presented herein, covering an extensive fraction of the literature on CEC published from the year 1997 until the beginning of 2000. Most of the recent developments have concentrated on column technology.

Monitoring temperature changes in capillary electrophoresis with nanoliter-volume NMR thermometry

Nanoliter-volume proton nuclear magnetic resonance (NMR) spectroscopy is used to monitor the electrolyte temperature during capillary electrophoresis (CE). By measuring the shift in the proton resonance frequency of the water signal, the intracapillary temperature can be recorded noninvasively with subsecond temporal resolution and spatial resolution on the order of 1 mm. Thermal changes of more than 65 degrees C are observed under both equilibrium and nonequilibrium conditions for typical CE separation conditions. Several capillary and buffer combinations are examined with external cooling by both liquid and air convection. Additionally, NMR thermometry allows nonequilibrium temperatures in analyte bands to be monitored during a separation. As one example, a plug of 1 mM NaCl is injected into a capillary filled with 50 mM borate buffer. Upon reaching the NMR detector, the temperature in the NaCl band is more than 20 degrees C higher than the temperature in the surrounding buffer. Such observations have direct applicability to a variety of studies, including experiments which utilize sample stacking and isotachophoresis.

Advances in column technology and instrumentation in capillary electrochromatography

Capillary electrochromatography (CEC) is an emerging technique gaining increased interest. Improvement of instrumentation and column technology will be of prime importance for the further development of this technique and its use in validated methods. In this paper, developments in column technology and instrumentation for CEC are reviewed with emphasis on developments within the last 3 years. Attention is directed to the employment of stationary phases specifically designed for CEC, the use of soft and rigid gels in place of packings, fritless packed capillaries, column dimensions, the optimization of injection and detection parameters, and gradient elution CEC.

Gradient elution techniques for capillary electrochromatography

Capillary electrochromatography (CEC) is a rapidly maturing technique, but still in need of further instrumental development and in need of unique applications that are not possible by traditional pressure-driven LC. We review the development of gradient elution schemes for CEC, beginning with pH gradients initially developed for capillary electrophoresis. Step gradients are the most easily instrumentally implemented, but provide less flexibility in separation than continuous gradients. Pressure-assisted CEC is easily adapted to gradient elution schemes, but does not offer the advantages of very high column efficiency provided by totally electro-driven mobile phases. The development of flow-injection interfaces allows a true solvent gradient to be generated by micro-LC pumps, with the mobile phase drawn into the separation capillary by pure electroosmotic flow. While requiring both a CEC instrument and a traditional pump or pumps capable of generating the gradient, this method offers advantages of greatly reduced column handling, prolonging column lifetimes, and allows simple autosampling. We also discuss voltage gradients, which provide a mobile phase velocity gradient.

Improved column preparation and performance in capillary electrochromatography

Problems encountered in capillary electrochromatography, i.e. non-reproducible column manufacture, bubble formation during usage, short column lifetimes and limited choice of packing particles are addressed by the development of fritless or single-frit, internally tapered, segmented and dead-volume free coupled capillary columns. The Van Deemter plots measured demonstrate the performance of these high-quality capillaries which are suitable for capillary electrochromatography as well as for capillary high-performance liquid chromatographic applications.

Capillary electroendoosmotic chromatography of peptides

This review focuses on the current state of peptide separation by capillary electroendoosmotic chromatography (CEC). When carried out under optimised conditions, peptide separation by CEC methods represents an orthogonal and complementary technique to micro-HPLC (micro-HPLC) and high-performance capillary zone electrophoresis (HPCZE). The origin of the selectivity differences that can be achieved with these three separation techniques (CEC, micro-HPLC and HPCZE), respectively are discussed, and the current limits of performance with CEC methods documented. Peptide separations by CEC methods with n-alkyl bonded silicas or mixed-mode phases are also illustrated. The development of different variants of CEC and pressurised CEC (also commonly referred to in the literature as electrically-assisted micro-HPLC) are examined. The potential of coupling CEC systems to mass spectrometers for real-time analyses of peptides or protein digests has been examined. Several future directions for the application of this technique in phenotype/proteomic and zeomic mapping of naturally occurring peptides and proteins are highlighted.

Applications of capillary electrochromatography

Applications performed by capillary electrochromatography (CEC) in all its modes, namely packed column CEC (packed-CEC), open tubular CEC (OT-CEC) and pressure-assisted CEC (pseudo-CEC), and published by June 1999 are reviewed. The review is divided into (i) separation of neutral, acidic and basic analytes with the main goal of evaluating column and system performance, (ii) separation according to field of application and/or chemical class, and (iii) separation of chiral analytes.

Capillary electrophoresis of peptides

This article gives a review of the recent developments in capillary electrophoresis (CE) of peptides. New approaches to the theoretical description of electromigration behavior of peptides are described, and methodological aspects of CE separations of peptides such as selection of separation conditions, sample treatment, suppression of peptide adsorption to the capillary wall and specificities of CE separation modes are discussed. Progress in application of high performance detection schemes, namely laser-induced fluorescence and mass spectrometry, in peptide separations by CE is presented. Applications of different CE techniques, zone electrophoresis, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography and electrochromatography to peptide analysis, preparation and physicochemical characterization are demonstrated.