Characterization of the electrochemical oxidation of peroxynitrite: relevance to oxidative stress bursts measured at the single cell level

Nanoelectrochemistry monitoring of intracellular reactive oxygen and nitrogen species induced by nanoplastic exposure

Airborne nanoplastics can enter alveolar cells and trigger intracellular oxidative stress primarily. Herein, taking advantage of the high electrochemical resolution of SiC@Pt nanoelectrodes, we achieved the quantitative discrimination of the major ROS/RNS within A549 cells, disclosed the sources of their precursors, and observed that the NO (RNS precursor) level significantly increased, whereas O2˙- (ROS precursor) remained relatively stable during the nanoplastics exposure. This establishes that iNOS or mitochondrion-targeted treatment may be a preventive or therapeutic strategy for nanoplastic-induced lung injury.

A borate-based peroxynitrite fluorescent probe and its application in fluorescence imaging of living cells

As a bioactive species with high oxidation capacity, peroxynitrite (ONOO^-) plays a crucial role in the regulation of diverse pathophysiological processes, and the overproduction of ONOO^- is closely associated with various physiological diseases such as liver injury, pulmonary fibrosis and so on. Herein, two borate-based fluorescent probes 3a and 3b were synthesized for monitoring ONOO^- by a simple substitution reaction. The experimental results showed that 3a and 3b had high selectivity and sensitivity for ONOO^-. The detection limits of 3a and 3b were 79.46 nM and 32.12 nM, respectively. Moreover, the recognition was not disturbed by other active oxygen groups and common ions. More importantly, the probes 3a and 3b had low cytotoxicity and were successfully used to detect endogenous and exogenous ONOO^-. They would provide an efficient detection method for further exploring the physiological and pathological role of ONOO^- in complex biological systems and related diseases.

A near infrared fluorescent probe for rapid sensing of peroxynitrite in living cells and breast cancer mice

Peroxynitrite (ONOO^-) plays an essential role in numerous physiological and pathological processes owing to its strong oxidation and nitrification. Many studies have shown that ONOO^- abnormalities are associated with inflammatory diseases, even cancer, such as arthritis, hepatitis, pneumonia, and breast cancer. Thus, developing a trustworthy technology to monitor ONOO^- levels is critical in inflammatory or cancer illnesses. Herein, an ultrafast near-infrared (NIR) fluorescent probe (Cy-OH-ONOO) is proposed to detect ONOO^- within 30 s. The probe's borate moiety is oxidized and separated from Cy-OH-ONOO, releasing a NIR fluorescence signal after interacting with ONOO^- under physiological circumstances. In addition, the probe displays good selectivity and sensitivity towards ONOO^- compared to other related biological species. Moreover, it is applied to the image and detects the level fluctuation of ONOO^- in living cells and breast cancer mice based on excellent features with high biocompatibility and low toxicity of the developed probe. Therefore, Cy-OH-ONOO could serve as a powerful imaging tool to understand the correlation of ONOO^- with inflammatory or breast cancer pathophysiological processes and to assess ONOO^- levels in cellular oxidative stress.

Activity-Based Fluorescent Probes Based on Hemicyanine for Biomedical Sensing

In recent years, fluorescent probes, as an analytical tool that can target and rapidly detect analytes, have been increasingly used for applications related to medical treatment, detection, and bioimaging. Researchers are interested in hemicyanine-based fluorescent probes because of their high quantum yield, tunable spectrum characteristics, absorption and emission in the near-infrared (NIR) region, and good photo-stability. The development of these dyes and their derivatives as NIR fluorescent probes for biological applications has advanced significantly in the last ten years. This review introduces processes for making hemicyanine dyes and the methodology for creating functional activity-based fluorescent probes. A variety of hemicyanine-based probes have been systematically developed for the detection of small biomolecules in various illnesses. Finally, the potential drawbacks of hemicyanine-based functional probes, and the prospects for future research and translation into clinical medicine, are also discussed. This study is intended to provide strategies for the development and design of novel fluorescence probes.

Homeostasis inside Single Activated Phagolysosomes: Quantitative and Selective Measurements of Submillisecond Dynamics of Reactive Oxygen and Nitrogen Species Production with a Nanoelectrochemical Sensor

Reactive oxygen and nitrogen species (ROS/RNS) are generated by macrophages inside their phagolysosomes. This production is essential for phagocytosis of damaged cells and pathogens, i.e., protecting the organism and maintaining immune homeostasis. The ability to quantitatively and individually monitor the four primary ROS/RNS (ONOO^-, H₂O₂, NO, and NO₂^-) with submillisecond resolution is clearly warranted to elucidate the still unclear mechanisms of their rapid generation and to track their concentration variations over time inside phagolysosomes, in particular, to document the origin of ROS/RNS homeostasis during phagocytosis. A novel nanowire electrode has been specifically developed for this purpose. It consisted of wrapping a SiC nanowire with a mat of 3 nm platinum nanoparticles whose high electrocatalytic performances allow the characterization and individual measurements of each of the four primary ROS/RNS. This allowed, for the first time, a quantitative, selective, and statistically robust determination of the individual amounts of ROS/RNS present in single dormant phagolysosomes. Additionally, the submillisecond resolution of the nanosensor allowed confirmation and measurement of the rapid ability of phagolysosomes to differentially mobilize their enzyme pools of NADPH oxidases and inducible nitric oxide synthases to finely regulate their homeostasis. This reveals an essential key to immune responses and immunotherapies and rationalizes its biomolecular origin.

The Scavenging Effect of Myoglobin from Meat Extracts toward Peroxynitrite Studied with a Flow Injection System Based on Electrochemical Reduction over a Screen-Printed Carbon Electrode Modified with Cobalt Phthalocyanine: Quantification and Kinetics

The scavenging activity of myoglobin toward peroxynitrite (PON) was studied in meat extracts, using a new developed electrochemical method (based on cobalt phthalocyanine-modified screen-printed carbon electrode, SPCE/CoPc) and calculating kinetic parameters of PON decay (such as half-time and apparent rate constants). As reactive oxygen/nitrogen species (ROS/RNS) affect the food quality, the consumers can be negatively influenced. The discoloration, rancidity, and flavor of meat are altered in the presence of these species, such as PON. Our new highly thermically stable, cost-effective, rapid, and simple electrocatalytical method was combined with a flow injection analysis system to achieve high sensitivity (10.843 nA µM⁻¹) at a nanomolar level LoD (400 nM), within a linear range of 3–180 µM. The proposed biosensor was fully characterized using SEM, FTIR, Raman spectroscopy, Cyclic Voltammetry (CV), Differential Pulse Voltammetry (DPV), and Linear Sweep Voltammetry (LSV). These achievements were obtained due to the CoPc-mediated reduction of PON at very low potentials (around 0.1 V vs. Ag/AgCl pseudoreference). We also proposed a redox mechanism involving two electrons in the reduction of peroxynitrite to nitrite and studied some important interfering species (nitrite, nitrate, hydrogen peroxide, dopamine, ascorbic acid), which showed that our method is highly selective. These features make our work relevant, as it could be further applied to study the kinetics of important oxidative processes in vivo or in vitro, as PON is usually present in the nanomolar or micromolar range in physiological conditions, and our method is sensitive enough to be applied.

Recent advances in ultrathin two-dimensional materials and biomedical applications for reactive oxygen species generation and scavenging

Graphene and graphene-like two-dimensional (2D) nanomaterials, such as black phosphorus (BP), transition metal carbides/carbonitrides (MXene) and transition metal dichalcogenides (TMD), have been extensively studied in recent years due to their unique physical and chemical properties. With atomic-scale thickness, these 2D materials and their derivatives can react with ROS and even scavenge ROS in the dark. With excellent biocompatibility and biosafety, they show great application potential in the antioxidant field and ROS detection for diagnosis. They can also generate ROS under light and be applied in antibacterial, photodynamic therapy (PDT), and other biomedical fields. Understanding the degradation mechanism of 2D nanomaterials by ROS generated under ambient conditions is crucial to developing air stable devices and expanding their application ranges. In this review, we summarize recent advances in 2D materials with a focus on the relationship between their intrinsic structure and the ROS scavenging or generating ability. We have also highlighted important guidelines for the design and synthesis of highly efficient ROS scavenging or generating 2D materials along with their biomedical applications.

Sensitive Molybdenum Disulfide Based Field Effect Transistor Sensor for Real-time Monitoring of Hydrogen Peroxide

A reliable and highly sensitive hydrogen peroxide (H₂O₂) field effect transistor (FET) sensor is reported, which was constructed by using molybdenum disulfide (MoS₂)/reduced graphene oxide (RGO). In this work, we prepared MoS₂ nanosheets by a simple liquid ultrasonication exfoliation method. After the RGO-based FET device was fabricated, MoS₂ was assembled onto the RGO surface for constructing MoS₂/RGO FET sensor. The as-prepared FET sensor showed an ultrahigh sensitivity and fast response toward H₂O₂ in a real-time monitoring manner with a limit of detection down to 1 pM. In addition, the constructed sensor also exhibited a high specificity toward H₂O₂ in complex biological matrix. More importantly, this novel biosensor was capable of monitoring of H₂O₂ released from HeLa cells in real-time. So far, this is the first report of MoS₂/RGO based FET sensor for electrical detection of signal molecules directly from cancer cells. Hence it is promising as a new platform for the clinical diagnosis of H₂O₂-related diseases.

Surface-Confined Electrochemiluminescence Microscopy of Cell Membranes

Herein is reported a surface-confined microscopy based on electrochemiluminescence (ECL) that allows to image the plasma membrane of single cells at the interface with an electrode. By analyzing photoluminescence (PL), ECL and AFM images of mammalian CHO cells, we demonstrate that, in contrast to the wide-field fluorescence, ECL emission is confined to the immediate vicinity of the electrode surface and only the basal membrane of the cell becomes luminescent. The resulting ECL microscopy reveals details that are not resolved by classic fluorescence microscopy, without any light irradiation and specific setup. The thickness of the ECL-emitting regions is ∼500 nm due to the unique ECL mechanism that involves short-lifetime electrogenerated radicals. In addition, the reported ECL microscopy is a dynamic technique that reflects the transport properties through the cell membranes and not only the specific labeling of the membranes. Finally, disposable transparent carbon nanotube (CNT)-based electrodes inkjet-printed on classic microscope glass coverslips were used to image cells in both reflection and transmission configurations. Therefore, our approach opens new avenues for ECL as a surface-confined microscopy to develop single cell assays and to image the dynamics of biological entities in cells or in membranes.

Electrochemical Quantification of Extracellular Local H2O2 Kinetics Originating from Single Cells

AIMS

H₂O₂ is produced by all eukaryotic cells under physiological and pathological conditions. Due to its enormous relevance for cell signaling at low concentrations and antipathogenic function at high concentrations, precise quantification of extracellular local hydrogen peroxide concentrations ([H₂O₂]) originating from single cells is required.

RESULTS

Using a scanning electrochemical microscope and bare platinum disk ultramicroelectrodes, we established sensitive long-term measurements of extracellular [H₂O₂] kinetics originating from single primary human monocytes (MCs) ex vivo. For the electrochemical techniques square wave voltammetry, cyclic and linear scan voltammetry, and chronoamperometry, detection limits for [H₂O₂] were determined to be 5, 50, and 500 nM, respectively. Following phorbol ester stimulation, local [H₂O₂] 5-8 μm above a single MC increased by 3.4 nM/s within the first 10 min before reaching a plateau. After extracellular addition of H₂O₂ to an unstimulated MC, the local [H₂O₂] decreased on average by 4.2 nM/s due to degradation processes of the cell. Using the scanning mode of the setup, we found that H₂O₂ is evenly distributed around the producing cell and can still be detected up to 30 μm away from the cell. The electrochemical single-cell measurements were validated in MC populations using electron spin resonance spectroscopy and the Amplex^® UltraRed assay. Innovation and Conclusion: We demonstrate a highly sensitive, spatially, and temporally resolved electrochemical approach to monitor dynamics of production and degradation processes for H₂O₂ separately. Local extracellular [H₂O₂] kinetics originating from single cells is quantified in real time. Antioxid. Redox Signal. 29, 501-517.

Using Ultrafast Responsive Phosphorescent Nanoprobe to Visualize Elevated Peroxynitrite In Vitro and In Vivo via Ratiometric and Time-Resolved Photoluminescence Imaging

Peroxynitrite (ONOO^- ), a potent biological oxidant, which has a short half-life in physiological conditions, is related to many diseases. Accurate peroxynitrite determination with superior selectivity and sensitivity is important for understanding biological roles of peroxynitrite in different health and disease tissues. Autofluorescence is an inevitable interference in luminescence biodetection and bioimaging, which often reduces signal-to-noise ratio during detection. In this work, a phosphorescent peroxynitrite nanoprobe (MSN-ONOO) which displays two emission bands is prepared by immobilizing two long-lived phosphorescent iridium(III) complexes that are peroxynitrite-activable and -inert, respectively, into water-dispersible mesoporous silica nanoparticles. Owing to the fast response rate, excellent sensitivity and outstanding selectivity of the nanoprobe toward peroxynitrite, it is further used for peroxynitrite determination in vitro and in vivo via ratiometric photoluminescence imaging. More notably, taking advantage of the long-lived phosphorescence of MSN-ONOO, in vivo elevated peroxynitrite is imaged with diminished autofluorescence interference and improved signal-to-noise ratio via time-resolved photoluminescence imaging. As far as it is known, this is the first time for endogenous peroxynitrite detection in vivo via the time-resolved photoluminescence imaging. Furthermore, the production of peroxynitrite in inflamed tissues is visualized.

Applications of Nanosheets in Frontier Cellular Research

Several types of nanosheets, such as graphene oxide (GO) nanosheet, molybdenum disulfide (MoS₂) and poly(l-lactic acid) (PLLA) nanosheets, have been developed and applied in vitro in cellular research over the past decade. Scientists have used nanosheet properties, such as ease of modification and flexibility, to develop new cell/protein sensing/imaging techniques and achieve regulation of specific cell functions. This review is divided into three main parts based on the application being examined: nanosheets as a substrate, nanosheets as a sensitive surface, and nanosheets in regenerative medicine. Furthermore, the applications of nanosheets are discussed, with two subsections in each section, based on their effects on cells and molecules. Finally, the application prospects of nanosheets in cellular research are summarized.

Hydrogen peroxide and glucose concentration measurement using optical fiber grating sensors with corrodible plasmonic nanocoatings

We propose and demonstrate hydrogen peroxide (H₂O₂) and glucose concentration measurements using a plasmonic optical fiber sensor. The sensor utilizes a tilted fiber Bragg grating (TFBG) written in standard single mode communication fiber. The fiber is over coated with an nm-scale film of silver that supports surface plasmon resonances (SPRs). Such a tilted grating SPR structure provides a high density of narrow spectral resonances (Q-factor about 10⁵) that overlap with the broader absorption band of the surface plasmon waves in the silver film, thereby providing an accurate tool to measure small shifts of the plasmon resonance frequencies. The H₂O₂ to be detected acts as an oxidant to etch the silver film, which has the effect of gradually decreasing the SPR attenuation. The etching rate of the silver film shows a clear relationship with the H₂O₂ concentration so that monitoring the progressively increasing attenuation of a selected surface plasmon resonance over a few minutes enables us to measure the H₂O₂ concentration with a limit of detection of 0.2 μM. Furthermore, the proposed method can be applied to the determination of glucose in human serum for a concentration range from 0 to 12 mM (within the physiological range of 3-8 mM) by monitoring the H₂O₂ produced by an enzymatic oxidation process. The sensor does not require accurate temperature control because of the inherent temperature insensitivity of TFBG devices referenced to the core mode resonance. A gold mirror coated on the fiber allows the sensor to work in reflection, which will facilitate the integration of the sensor with a hypodermic needle for in vitro measurements. The present study shows that Ag-coated TFBG-SPR can be applied as a promising type of sensing probe for optical detection of H₂O₂ and glucose detection in human serum.

Graphene blended with SnO2 and Pd-Pt nanocages for sensitive non-enzymatic electrochemical detection of H2O2 released from living cells

This paper described a novel, facile and nonenzymatic electrochemical biosensor to detect hydrogen peroxide (H₂O₂). The sensor was fabricated based on Pd-Pt nanocages and SnO₂/graphene nanosheets modified electrode (PdPt NCs@SGN/GCE). The electrochemical behavior of PdPt NCs@SGN/GCE exhibited excellent catalytic activity toward H₂O₂ with fast response, high selectivity, superior sensitivity, low detection limit of 0.3 μM and large linear range from 1 μM to 300 μM. Under these obvious advantages, the constructed biosensor provided to be reliable for determination of H₂O₂ secreted from human cervical cancer cells (Hela cells). Hence, the proposed biosensor is a promising candidate for detection of H₂O₂ in situ released from living cells in clinical diagnostics.

Small Naked Pt Nanoparticles Confined in Mesoporous Shell of Hollow Carbon Spheres for High-Performance Nonenzymatic Sensing of H2O2 and Glucose

Nonenzyme direct electrochemical sensing of hydrogen peroxide and glucose by highly active nanomaterial-modified electrode has attracted considerable attention. Among the reported electrochemical sensing materials, hollow carbon sphere (HCS) is an attractive carbon support because of its large specific surface area, porous structure, and easy accessibility for target molecules. In this study, naked Pt nanoparticles with average size of 3.13 nm are confined in mesoporous shells of hollow carbon spheres (Pt/HCS) by using one-step synthesis, which can not only produce highly dispersed Pt nanoparticles with clean surface, but also avoid the relatively slow impregnation-reduction process. The surface area of the obtained Pt/HCS (566.30 m² g^-1) is larger than that of HCS, attributing to the enlarged surface area after Pt nanoparticles deposition. The average pore width of Pt/HCS (3.33 nm) is smaller than that of HCS (3.84 nm), indicating the filling of Pt nanoparticles in the mesopores of carbon shells. By using the as-synthesized Pt/HCS as nonenzymatic sensing material, H₂O₂ and glucose can be detected with high sensitivity and selectivity. The linear range toward H₂O₂ sensing is from 0.3 to 2338 μM, and the limit of detection (LOD) is 0.1 μM. For glucose sensing, Pt/HCS exhibited two linear ranges from 0.3 to 10 mM and from 10 to 50 mM with an LOD of 0.1 mM. In addition, the Pt/HCS exhibited higher electrochemical stability than commercial Pt/C in acid solution. The present study demonstrates that Pt/HCS is a promising sensing material for electrochemical detection of both H₂O₂ and glucose.

para-Hydroxy Thiophenol-Coated CdSe/ZnS Quantum Dots as a Turn-On Fluorescent Probe for H2O2 Detection in Aqueous Media

Since hydrogen peroxide plays an important role in various fields, a facile, simple, highly selective, and stable analytic method for H2O2 is desirable. Semiconductor quantum dots (QDs) have acted as a potential alternative for organic fluorophores in fluorescence analytical fields due to their superior optical properties. Herein, we report hydrophilic p-hydroxy thiophenol (p-HTP) coated CdSe/ZnS QDs (denoted as p-HTP-QDs) acting as a selective fluorescence ‘turn-on’ probe for H2O2 in aqueous media. The obtained p-HTP-QD probe exhibits weak fluorescence, which stems from hole transfer from the QDs to p-HTP. The presence of H2O2 induces an oxidative structural transformation of p-HTP in p-HTP-QDs from a phenol structure to an α-hydroxy ketone derivative, which extremely reduces the driving force for hole transfer. Thus, the QDs photoluminescence (PL) was re-switched on. Under optimized conditions, an excellent linear relationship between fluorescence response and H2O2 concentration could be produced with a linear range from 0.309 to 4.900mM. The limit of detection of this probe was found to be 0.135mM. Moreover, the present probe exhibited a high selectivity of H2O2 over other reactive oxygen species/reactive nitrogen species (ROS/RNS) and was successfully used in the detection of H2O2 in real water samples.

Low-Temperature Trapping of Intermediates in the Reaction of NO• with O2

The autoxidation of NO^• was studied in glass-like matrices of 2-methylbutane at 110 K and in a 8:3 v/v mixture of 2,2-dimethylbutane and n-pentane (rigisolve) at 80-90 K, by letting gaseous NO^• diffuse into these solvents that were saturated with O₂. In 2-methyllbutane, we observed a red compound. However, in rigisolve at 85-90 K, a bright yellow color appears that turns red when the sample is warmed by 10-20 K. The new yellow compound is a precursor of the red one and also diamagnetic. The UV-vis spectrum of the yellow compound contains a band which resembles that present in ONOO^-. Because the red and yellow intermediates are not paramagnetic, we postulate that O═N-O-O^• is in close contact with NO^•, or with another O═N-O-O^•. Diffusion of gaseous O₂ into rigisolve saturated with NO^• does not produce a color; however, a weak EPR signal (g = 2.010) is observed. This signal most likely indicates the presence of ONOO^•. These findings complement our earlier observation of a red color at low temperatures and the presence of ONOO^• in the gas phase (Galliker, B.; Kissner, R.; Nauser, T.; Koppenol, W. H. Chem. Eur. J. 2009, 15, 6161-6168), and they indicate that the termolecular autoxidation of nitrogen monoxide proceeds via the intermediate ONOO^• and not via N₂O₂.

Peroxynitrite Sensor Based on a Screen Printed Carbon Electrode Modified with a Poly(2,6-dihydroxynaphthalene) Film

For the first time the electropolymerization of 2,6-dihydroxynaphthalene (2,6-DHN) on a screen printed carbon electrode (SPCE) was investigated and evaluated for peroxynitrite (PON) detection. Cyclic voltammetry was used to electrodeposit the poly(2,6-DHN) on the carbon electrode surface. The surface morphology and structure of poly(2,6-DHN) film were investigated by SEM and FTIR analysis, and the electrochemical features by cyclic voltammetry. The poly(2,6-DHN)/SPCE sensor showed excellent electrocatalytic activity for PON oxidation in alkaline solutions at very low potentials (0-100 mV vs. Ag/AgCl pseudoreference). An amperometric FIA (flow injection analysis) system based on the developed sensor was optimized for PON measurements and a linear concentration range from 2 to 300 μM PON, with a LOD of 0.2 μM, was achieved. The optimized sensor inserted in the FIA system exhibited good sensitivity (4.12 nA·μM^-1), selectivity, stability and intra-/inter-electrode reproducibility for PON determination.

Electrochemical detection of peroxynitrite using hemin-PEDOT functionalized boron-doped diamond microelectrode

Peroxynitrite is a potent nitroxidation agent and highly reactive metabolite, clinically correlated with a rich pathophysiology. Its sensitive and selective detection is challenging due to its high reactivity and short sub-second lifetime. Boron-doped diamond (BDD) microelectrodes have attracted interest because of their outstanding electroanalytical properties that include a wide working potential window and enhanced signal-to-noise ratio. Herein, we report on the modification of a BDD microelectrode with an electro-polymerized film of hemin and polyethylenedioxythiophene (PEDOT) for the purpose of selectively quantifying peroxynitrite. The nanostructured modified polymer layer was characterized by Raman spectroscopy and scanning electron microscopy (SEM). The electrochemical response to peroxynitrite was studied by voltammetry and time-based amperometry. The measured detection limit was 10 ± 0.5 nM (S/N = 3), the sensitivity was 4.5 ± 0.5 nA nM(-1) and the response time was 3.5 ± 1 s. The hemin-PEDOT BDD sensors exhibited a response variability of 5% or less (RSD). The stability of the sensors after a 20-day storage in 0.1 M PB (pH 7.4) at 4 °C was excellent as at least 93% of the initial response to 50 nM PON was maintained. The presence of PEDOT was correlated with a sensitivity increase.

Electrochemical amination of graphene using nanosized PAMAM dendrimers for sensing applications

Electrochemically aminated graphene as an effective platform for immobilization of enzymes, proteins, DNA, antibodies, antigens, etc. resulting development of highly sensitive graphene based bio and chemical sensors.

Convergence of biological nitration and nitrosation via symmetrical nitrous anhydride

Current perspective holds that the generation of secondary signaling mediators from nitrite (NO₂⁻) requires acidification to nitrous acid (HNO₂) or metal catalysis. Herein, the use of stable isotope-labeled NO₂⁻ and LC-MS/MS analysis of products revealed that NO₂⁻ also participates in fatty acid nitration and thiol S-nitrosation at neutral pH. These reactions occur in the absence of metal centers and are stimulated by nitric oxide (^•NO) autoxidation via symmetrical dinitrogen trioxide (nitrous anhydride, symN₂O₃) formation. While theoretical models have predicted physiological symN₂O₃ formation, its generation is now demonstrated in aqueous reaction systems, cell models and in viv, with the concerted reactions of ^•NO and NO₂⁻ shown to be critical for symN₂O₃ formation. These results reveal new mechanisms underlying the NO₂⁻ propagation of ^•NO signaling and the regulation of both biomolecule function and signaling network activity via NO₂⁻-dependent nitrosation and nitration reactions.

Cobalt phthalocyanine tetracarboxylic acid modified reduced graphene oxide: a sensitive matrix for the electrocatalytic detection of peroxynitrite and hydrogen peroxide

The electrocatalytic properties of cobalt phthalocyanine modified reduced graphene oxide for peroxynitrite and hydrogen peroxide are investigated.

Peroxynitrite activity of hemin-functionalized reduced graphene oxide

Conducting interfaces modified with reduced graphene oxide (rGO) have shown improved electrochemical response for different analytes. The efficient formation of functionalized rGO based materials is thus of current interest for the development of sensitive and selective biosensors. Herein, we report a simple and environmentally friendly method for the formation of a hemin-functionalized rGO hybrid nanomaterial that exhibits remarkable sensitivity to peroxynitrite (ONOO(-)) in solution. The hemin-functionalized rGO hybrid nanomaterial was formed by mixing an aqueous solution of graphene oxide (GO) with hemin and sonicating the suspension for 5 h at room temperature. In addition to playing a key role in biochemical and electrocatalytic reactions, hemin has been proven to be a good reducing agent for GO. The sensitivity of the peroxynitrite sensor is ≈7.5 ± 1.5 nA mM(-1) with a detection limit of 5 ± 1.5 nM.

Nanoelectrodes for determination of reactive oxygen and nitrogen species inside murine macrophages

Reactive oxygen and nitrogen species (ROS and RNS) produced by macrophages are essential for protecting a human body against bacteria and viruses. Micrometer-sized electrodes coated with Pt black have previously been used for selective and sensitive detection of ROS and RNS in biological systems. To determine ROS and RNS inside macrophages, one needs smaller (i.e., nanometer-sized) sensors. In this article, the methodologies have been extended to the fabrication and characterization of Pt/Pt black nanoelectrodes. Electrodes with the metal surface flush with glass insulator, most suitable for quantitative voltammetric experiments, were fabricated by electrodeposition of Pt black inside an etched nanocavity under the atomic force microscope control. Despite a nanometer-scale radius, the true surface area of Pt electrodes was sufficiently large to yield stable and reproducible responses to ROS and RNS in vitro. The prepared nanoprobes were used to penetrate cells and detect ROS and RNS inside macrophages. Weak and very short leaks of ROS/RNS from the vacuoles into the cytoplasm were detected, which a macrophage is equipped to clean within a couple of seconds, while higher intensity oxidative bursts due to the emptying of vacuoles outside persist on the time scale of tens of seconds.

Nitrosation, thiols, and hemoglobin: energetics and kinetics

Nitrosothiols are powerful vasodilators. Although the mechanism of their formation near neutral pH is an area of intense research, neither the energetics nor the kinetics of this reaction or of subsequent reactions have been addressed. The following considerations may help to guide experiments. (1) The standard Gibbs energy for the homolysis reaction RSNO → RS(•) + NO(•)(aq) is +110 ± 5 kJ mol(-1). (2) The electrode potential of the RSNO, H(+)/RSH, NO(•)(aq) couple is -0.20 ± 0.06 V at pH 7. (3) Thiol nitrosation by NO(2)(-) is favorable by 37 ± 5 kJ mol(-1) at pH 7. (4) N(2)O(3) is not involved in in vivo nitrosation mechanisms for thermodynamic--its formation from NO(2)(-) costs 59 kJ mol(-1)--or kinetic--the reaction being second-order in NO(2)(-)--reasons. (5) Hemoglobin (Hb) cannot catalyze formation of N(2)O(3), be it via the intermediacy of the reaction of Hb[FeNO(2)](2+) with NO(•) (+81 kJ mol(-1)) or reaction of Hb[FeNO](3+) with NO(2)(-) (+88 kJ mol(-1)). (6) Energetically and kinetically viable are nitrosations that involve HNO(2) or NO(•) in the presence of an electron acceptor with an electrode potential higher than -0.20 V. These considerations are derived from existing thermochemical and kinetics data.