Revealing the Phagosomal pH Regulation and Inflammation of Macrophages after Endocytosing Polyurethane Nanoparticles by A Ratiometric pH Nanosensor

pH-responsive cationic polymer-functionalized poly-ε-caprolactone microspheres scavenge cell-free-DNA to alleviate intestinal ischemia/reperfusion injury by inhibiting M1 macrophage polarization

Intestinal ischemia/reperfusion (I/R) injury is a common life-threatening condition. Inflammatory dysregulation plays a crucial role in the pathological progression of intestinal I/R injury, indicating that controlling excessive inflammatory responses can be an effective strategy for mitigating I/R injury. Herein, after establishing a correlation between cell-free DNA (cfDNA) levels and postoperative inflammatory factors in samples from patients with intestinal I/R, we tested a cfDNA-scavenging approach for the treatment of intestinal I/R injury. Poly-ε-caprolactone (PCL) microspheres (Micro DEA2k) functionalized with a pH-responsive cationic polymer (DEA2k) to efficiently scavenge cfDNA were synthesized and evaluated.These microspheres exhibited enhanced cfDNA adsorption under inflammation-induced acidic conditions, along with low toxicity, reduced non-specific protein binding, and extended peritoneal retention. In a mouse model of intestinal I/R injury, the intraperitoneal injection Micro DEA2k effectively bound cfDNA, regulated the mononuclear phagocytic system, decreased the number of M1 macrophages, suppressed inflammation, and significantly improved the survival rate of the mice. These findings suggest that cfDNA scavenging using cationic microspheres has considerable potential for alleviating intestinal I/R injury.

Modulation of IFN-γ induced macrophage inflammatory responses via indomethacin-loaded NLCs for OA management

Macrophages are the main cells present in the synovial membrane. They play an important role in the development and progression of osteoarthritis (OA). After the establishment of the disease macrophages mostly adopt a pro-inflammatory secretory phenotype (OA phenotype) further inducing cartilage degradation. Indomethacin (IND) is a non-steroidal anti-inflammatory drug (NSAID) able to inhibit the synthesis of prostaglandins mediated by both cyclooxygenase isoforms depicting a potent anti-inflammatory capacity. However, the lack of specificity and short half-like of free drugs within the joint cavity limits its utility in controlling inflammation after intra-articular administration. This study aims at developing IND loaded glycosylated nanostructured lipid carriers (NLCs) to selectively target macrophages and promote their reprogramming to an anti-inflammatory phenotype. This approach focused on the local administration of the NLCs, offers a promising therapeutic strategy for treating OA by modulating the inflammatory environment within the joint. NLCs will be designed by combining experimental and in silico docking analyses, and thoroughly characterized to obtain drug delivery systems with high stability and suitable physicochemical properties. The proposed mannose-functionalized systems exhibited adequate particle sizes (≈ 70 nm) and positive surface charges (> 20 mV) to be efficiently retained in the joint cavity. Moreover, the developed NLCs demonstrated effective and specific uptake by OA-like macrophages leading to a significant decrease in the secretion of the pro-inflammatory cytokines IL-6, IL-8 and TNF-α similarly to the free drug. Therefore, these systems effectively reprogrammed OA-associated macrophages to adopt a more regenerative phenotype, offering a promising strategy for managing inflammation in OA.

The secretory Candida effector Sce1 licenses fungal virulence by masking the immunogenic β-1,3-glucan and promoting apoptosis of the host cells

Candida albicans deploys a variety of mechanisms such as morphological switch and elicitor release to promote virulence. However, the intricate interactions between the fungus and the host remain poorly understood, and a comprehensive inventory of fungal virulence factors has yet to be established. In this study, we identified a C. albicans secretory effector protein Sce1, whose induction and secretion are associated with vagina-simulative conditions and chlamydospore formation. Sequence alignment showed that Sce1 belongs to a Pir family in C. albicans, which is conserved across several fungi and primarily characterized as a β-glucan binding protein in the Saccharomyces cerevisiae. Mechanically, Sce1 is primarily localized to the cell wall in a cleaved form as an alkali-labile β-1,3-glucan binding protein and plays a role in masking β-glucan in acidic environments and chlamydospores, a feature that might underline C. albicans' ability to evade host immunity. Further, a cleaved short form of Sce1 protein could be released into extracellular compartments and presented in bone marrow-derived macrophages infected with chlamydospores. This cleaved short form of Sce1 also demonstrated a unique ability to trigger the caspases-8/9-dependent apoptosis in various host cells. Correspondingly, genetic deletion of SCE1 led to dampened vaginal colonization of C. albicans and diminished fungal virulence during systemic infection. The discovery of Sce1 as a versatile virulence effector that executes at various compartments sheds light on the fungus-host interactions and C. albicans pathogenesis.

Preparation and pH Detection Performance of Rosin-Based Fluorescent Polyurethane Microspheres

Rosin-based fluorescent polyurethane emulsion (FPU) was prepared using isophorone diisocyanate, ester of acrylic rosin and glycidyl methacrylate, 1,5-dihydroxy naphthalene (1,5-DN), and 1,4-butanediol as the raw materials. Then, rosin-based fluorescent polyurethane microspheres (FPUMs) were successfully prepared by suspension polymerization method using FPU as the main material, azodiisobutyronitrile as the initiator, and gelatin as the dispersant. FPUMs were characterized by Fourier transform infrared spectra, thermogravimetric analysis, optical microscopy, scanning electron microscopy and fluorescence spectra, and the response performance of FPUMs to pH was studied. The results showed that FPUMs were successfully prepared. With the increase of the level of 1,5-DN, the particle size of FPUMs increased gradually, and the fluorescence intensity increased first and then decreased. When the level of 1,5-DN was 3 wt.%, the average particle size was 49.3 μm, the particle distribution index (PDI) was 1.05, and the fluorescence intensity was the largest (3662 a.u.). The fluorescence intensity of FPUMs increased linearly with the decrease of pH, which can be used for pH detection in solution. Furthermore, the FPUMs exhibited good thermal stability, anti-interference and recoverability.

About the Transient Effects of Synthetic Amorphous Silica: An In Vitro Study on Macrophages

Silica (either crystalline or amorphous) is widely used for different applications and its toxicological assessment depends on its characteristics and intended use. As sustained inflammation induced by crystalline silica is at the root of silicosis, investigating the inflammatory effects induced by amorphous silicas and their persistence is needed. For the development of new grades of synthetic amorphous silicas, it is also desirable to be able to understand better the factors underlying potential adverse effects. Therefore, we used an optimized in vitro macrophage system to investigate the effects of amorphous silicas, and their persistence. By using different amorphous silicas, we demonstrated that the main driver for the adverse effects is a low size of the overall particle/agglomerate; the second driver being a low size of the primary particle. We also demonstrated that the effects were transient. By using silicon dosage in cells, we showed that the transient effects are coupled with a decrease of intracellular silicon levels over time after exposure. To further investigate this phenomenon, a mild enzymatic cell lysis allowed us to show that amorphous silicas are degraded in macrophages over time, explaining the decrease in silicon content and thus the transiency of the effects of amorphous silicas on macrophages.

Streptolysin S targets the sodium-bicarbonate cotransporter NBCn1 to induce inflammation and cytotoxicity in human keratinocytes during Group A Streptococcal infection

Group A <i>Streptococcus</i> (GAS, <i>Streptococcus pyogenes</i>) is a Gram-positive human pathogen that employs several secreted and surface-bound virulence factors to manipulate its environment, allowing it to cause a variety of disease outcomes. One such virulence factor is Streptolysin S (SLS), a ribosomally-produced peptide toxin that undergoes extensive post-translational modifications. The activity of SLS has been studied for over 100 years owing to its rapid and potent ability to lyse red blood cells, and the toxin has been shown to play a major role in GAS virulence <i>in vivo</i>. We have previously demonstrated that SLS induces hemolysis by targeting the chloride-bicarbonate exchanger Band 3 in erythrocytes, indicating that SLS is capable of targeting host proteins to promote cell lysis. However, the possibility that SLS has additional protein targets in other cell types, such as keratinocytes, has not been explored. Here, we use bioinformatics analysis and chemical inhibition studies to demonstrate that SLS targets the electroneutral sodium-bicarbonate cotransporter NBCn1 in keratinocytes during GAS infection. SLS induces NF-κB activation and host cytotoxicity in human keratinocytes, and these processes can be mitigated by treating keratinocytes with the sodium-bicarbonate cotransport inhibitor S0859. Furthermore, treating keratinocytes with SLS disrupts the ability of host cells to regulate their intracellular pH, and this can be monitored in real time using the pH-sensitive dye pHrodo Red AM in live imaging studies. These results demonstrate that SLS is a multifunctional bacterial toxin that GAS uses in numerous context-dependent ways to promote host cell cytotoxicity and increase disease severity. Studies to elucidate additional host targets of SLS have the potential to impact the development of therapeutics for severe GAS infections.

Planar-/Curvilinear-Bioprinted Tri-Cell-Laden Hydrogel for Healing Irregular Chronic Wounds

Chronic cutaneous wounds from tissue trauma or extensive burns can impair skin barrier function and cause severe infection. Fabrication of a customizable tissue-engineered skin is a promising strategy for regeneration of uneven wounds. Herein, a planar-/curvilinear-bioprintable hydrogel is developed to produce tissue-engineered skin and evaluated in rat models of chronic and irregular wounds. The hydrogel is composed of biodegradable polyurethane (PU) and gelatin. The hydrogel laden with cells displays good 3D printability and structure stability. The circular wounds of normal and diabetes mellitus (DM) rats treated with planar-printed tri-cell-laden (fibroblasts, keratinocytes, and endothelial progenitor cells (EPCs)) hydrogel demonstrate full reepithelization and dermal repair as well as large amounts of neovascularization and collagen production after 28 days. Furthermore, the curvilinear module is fabricated based on the corresponding wound topography for curvilinear-bioprinting of the irregular tissue-engineered skin. The large and irregular rat skin wounds treated with curvilinear-printed tri-cell-laden hydrogel demonstrate full repair after 28 days. This planar-/curvilinear-bioprintable tri-cell-laden hydrogel shows great potential for customized biofabrication in skin tissue engineering.

Design of therapeutic biomaterials to control inflammation

Inflammation plays an important role in the response to danger signals arising from damage to our body and in restoring homeostasis. Dysregulated inflammatory responses occur in many diseases, including cancer, sepsis and autoimmunity. The efficacy of anti-inflammatory drugs, developed for the treatment of dysregulated inflammation, can be potentiated using biomaterials, by improving the bioavailability of drugs and by reducing side effects. In this Review, we first outline key elements and stages of the inflammatory environment and then discuss the design of biomaterials for different anti-inflammatory therapeutic strategies. Biomaterials can be engineered to scavenge danger signals, such as reactive oxygen and nitrogen species and cell-free DNA, in the early stages of inflammation. Materials can also be designed to prevent adhesive interactions of leukocytes and endothelial cells that initiate inflammatory responses. Furthermore, nanoscale platforms can deliver anti-inflammatory agents to inflammation sites. We conclude by discussing the challenges and opportunities for biomaterial innovations in addressing inflammation.