A new supramolecular hole injection/transport material on conducting polymer for application in light-emitting diodes

Metallacycle-Cored Supramolecular Polymers: Fluorescence Tuning by Variation of Substituents

Herein, we present a method for the preparation of supramolecular polymers with tunable fluorescence via the combination of metal-ligand coordination and phenanthrene-21-crown-7 (P21C7)-based host-guest interactions. A suite of rhomboidal metallacycles with different substituents were prepared via the coordination-driven self-assembly of a P21C7-based 60° diplatinum(II) acceptor and 120° dipyridyl donors. Upon variation of the substituents on the dipyridyl donors, the metallacycles exhibit emission wavelengths spanning the visible region (λmax = 427-593 nm). Metallacycle-cored supramolecular polymers were obtained via host-guest interactions between bis-ammonium salts and P21C7. The supramolecular polymers exhibit emission wavelengths similar to those of the individual metallacycles and higher fluorescent efficiency in solution and thin films. Utilizing a yellow-emitting supramolecular polymer thin film with high quantum yield (0.22), a white-light-emitting LED was fabricated by painting the thin film onto an ultraviolet LED. This study presents an efficient approach for tuning the properties of fluorescent supramolecular polymers and the potential of the metallacycle-cored supramolecular polymers as a platform for the fabrication of light-emitting materials with good processability and tunability.

Low-Temperature Cross-Linkable Small Molecules for Fully Solution-Processed OLEDs

Cross-linkable hole-transporting, host, and electron-transporting materials with a new cross-linking group, uracil, are designed and synthesized. These compounds exhibited good solubility in common organic solvents and excellent solvent resistance after cross-linking at a low temperature of 120 °C. The OLED was fabricated by all-solution processing using cross-linkable synthetic compounds, except for the electrodes. This device exhibited a current efficiency of 39.2 cd A^-1 and a power efficiency of 15.3 lm W^-1 .

Unveiling the Different Emission Behavior of Polytriazoles Constructed from Pyrazine-Based AIE Monomers by Click Polymerization

Polymers with aggregation-induced emission (AIE) characteristics have aroused tremendous interest because of their potential applications in large-area flexible display and luminescent self-assembling, and as stimuli-responsive and porous materials. However, the design of AIE-active polymers is always not as easy as that of small molecules because their properties are hard to predict. In some cases, the polymers prepared from the AIE-active monomers show the aggregation-caused quenching (ACQ) instead of AIE effect. To understand the structure-property relationship of the polymers constructed from the AIE monomers, in this paper, two pyrazine-containing AIE monomers were utilized to construct luminescent polymers by click polymerization. The photophysical property investigation indicates that the polytriazole containing tetraphenylpyrazine units is AIE-active, whereas that bearing 2,3-dicyano-5,6-diphenylpyrazine units suffers from the ACQ effect. Through systematical investigation, the cause for such difference was unveiled. Thus, this work provides a useful guidance for further design of AIE-active polymers.

Water-soluble fullerene-functionalized polymer micelles for efficient aqueous-processed conductive devices

A novel fullerene-based water-soluble conducting micelle has been successfully developed, providing a potential route towards development of aqueous-processed electronic devices.

Supramolecular core-shell nanoparticles for photoconductive device applications

We report a breakthrough discovery involving supramolecular-based strategies to construct novel core-shell heterojunction nanoparticles with hydrophilic adenine-functionalized polythiophene (PAT) as the core and hydrophobic phenyl-C61-butyric acid methyl ester (PCBM) as the shell, which enables the conception of new functional supramolecular assemblies for constructing functional nanomaterials for applications in optoelectronic devices. The generated nanoparticles exhibit uniform spherical shape, well-controlled tuning of particle size with narrow size distributions, and excellent electrochemical stability in solution and the solid state owing to highly efficient energy transfer from PAT to PCBM. When the PAT/PCBM nanoparticles were fabricated into a photoconducting layer in an electronic device, the resulting device showed excellent electric conduction characteristics, including an electrically-tunable voltage-controlled switch, and high short-circuit current and open-circuit voltage. These observations demonstrate how the self-assembly of PAT/PCBM into specific nanostructures may help to promote efficient charge generation and transport processes, suggesting potential for a wide variety of applications as a promising candidate material for bulk heterojunction polymer devices.

Highly efficient drug delivery systems based on functional supramolecular polymers: In vitro evaluation

The novel concept of modifying and enhancing the properties of existing functional micelles through self-complementary interactions has significant potential. In this study, a practical approach to living polymerization of functionalized thermoresponsive monomers enabled the incorporation of self-constituted multiple hydrogen bonded groups into micelles that have potential as supramolecular drug-delivery systems. Phase transitions and morphological studies in aqueous solution showed that the microstructure can be controlled to achieve well-defined vesicle-like micelles with respect to the strength of the hydrogen bond segment. Thus, the resulting micelles have a very low critical micellization concentration and very high loading capacity (16.1%), making the loading process extremely stable and efficient. Incorporation of the anticancer drug doxorubicin (DOX) affected the micellization process in aqueous solution and enabled fine-tuning of drug loading and precise control of drug release rate with excellent sensitivity. Release studies in vitro showed that DOX-loaded micelles exerted dose-dependent cytotoxicity against human liver carcinoma (HepG2) cells at the physiological temperature of 37°C. In addition, DOX-loaded micelles were efficiently endocytosed by the cancer cells, which may enable the micelles to serve as suitable vehicles for effective delivery of anticancer drugs to primary tumors and metastatic disease. This newly developed material may provide a potential route towards next-generation drug delivery vehicles.

STATEMENT OF SIGNIFICANCE

A breakthrough innovation in water-based thermo-responsive polymers has enabled significant progress in developing smart stimuli-responsive nanocarriers by generating novel "supramolecular polymeric micelles" via self-complementary hydrogen-bonding interactions. These newly developed micelles exhibit extremely high micellar stability and drug loading capacity (up to 16%), excellent thermo-responsive behavior and precise control of drug release rate due to hydrogen-bond-induced physical cross-linking. In addition, doxorubicin-loaded micelles were efficiently endocytosed by the cancer cells, which allows them to serve as suitable vehicles for effective delivery of anticancer drugs to primary tumors and metastatic disease. Thus, this work provides a potential route for the development of next generation multifunctional nanocarriers that have improved safety and to increase the therapeutic efficacy of anticancer therapy.

Synthesis and characterization of triphenylamine-based polymers and their application towards solid-state electrochromic cells

Triphenyl amine based new molecules have synthesized for electrochromic cells. We achieved color change forPJK1, orange to dark green; forPJK2, light yellow to reddish brown; forPJK3, light blue to grey; and forPJK4, green to bluish green.

Highly Improved Efficiency of Deep-Blue Fluorescent Polymer Light-Emitting Device Based on a Novel Hole Interface Modifier with 1,3,5-Triazine Core

We present an investigation of deep-blue fluorescent polymer light-emitting diodes (PLEDs) with a novel functional 1,3,5-triazine core material (HQTZ) sandwiched between poly(3,4-ethylene dioxythiophene):poly(styrene sulfonic acid) layer and poly(vinylcarbazole) layer as a hole injection layer (HIL) without interface intermixing. Ultraviolet photoemission spectroscopy and Kelvin probe measurements were carried out to determine the change of anode work function influenced by the HQTZ modifier. The thin HQTZ layer can efficiently maximize the charge injection from anode to blue emitter and simultaneously enhance the hole mobility of HILs. The deep-blue device performance is remarkably improved with the maximum luminous efficiency of 4.50 cd/A enhanced by 80% and the maximum quantum efficiency of 4.93%, which is 1.8-fold higher than that of the conventional device without HQTZ layer, including a lower turn-on voltage of 3.7 V and comparable Commission Internationale de L'Eclairage coordinates of (0.16, 0.09). It is the highest efficiency ever reported to date for solution-processed deep-blue PLEDs based on the device structure of ITO/HILs/poly(9,9-dialkoxyphenyl-2,7-silafluorene)/CsF/AL. The results indicate that HQTZ based on 1,3,5-triazine core can be a promising candidate of interfacial materials for deep-blue fluorescent PLEDs.

A cross-linkable triphenylamine derivative as a hole injection/transporting material in organic light-emitting diodes

A new thermally cross-linkable triphenylamine derivative containing a benzoxazine functional group for application in organic light-emitting diodes (OLEDs.)

Large-scale production of ureido-cytosine based supramolecular polymers with well-controlled hierarchical nanostructures

A novel UrCy–PPG was developed for the synthesis of high-quality supramolecular polymers in large-scale production utilizing only commercially-available chemicals.

Supramolecular self-assemblies as functional nanomaterials

In this review, we survey the diversity of structures and functions which are encountered in advanced self-assembled nanomaterials. We highlight their flourishing implementations in three active domains of applications: biomedical sciences, information technologies, and environmental sciences. Our main objective is to provide the reader with a concise and straightforward entry to this broad field by selecting the most recent and important research articles, supported by some more comprehensive reviews to introduce each topic. Overall, this compilation illustrates how, based on the rules of supramolecular chemistry, the bottom-up approach to design functional objects at the nanoscale is currently producing highly sophisticated materials oriented towards a growing number of applications with high societal impact.