A high-performance recycling solution for polystyrene achieved by the synthesis of renewable poly(thioether) networks derived from D-limonene

Recent Advances in Visible-Light Photoredox Catalysis for the Thiol-Ene/Yne Reactions

Visible-light photoredox catalysis has been established as a popular and powerful tool for organic transformations owing to its inherent characterization of environmental friendliness and sustainability in the past decades. The thiol-ene/yne reactions, the direct hydrothiolation of alkenes/alkynes with thiols, represents one of the most efficient and atom-economic approaches for the carbon-sulfur bonds construction. In traditional methodologies, harsh conditions such as stoichiometric reagents or a specialized UV photo-apparatus were necessary suffering from various disadvantages. In particular, visible-light photoredox catalysis has also been demonstrated to be a greener and milder protocol for the thiol-ene/yne reactions in recent years. Additionally, unprecedented advancements have been achieved in this area during the past decade. In this review, we will summarize the recent advances in visible-light photoredox catalyzed thiol-ene/yne reactions from 2015 to 2021. Synthetic strategies, substrate scope, and proposed reaction pathways are mainly discussed.

Measurement of polystyrene photodegradation rate using a quartz crystal microbalance

Polystyrene is a very popular polymer utilised in the manufacture of various consumer products. This polymer is very cheap; however, after its usage, the slowness of its photodegradation leads to environmental pollution. In this report, the author presents a technique to systematically measure the rate of photodegradation of a thin polystyrene film. The said film was made to coat a quartz crystal microbalance (QCM) sensor. In order to detect polymer degradation and the reduction in the molecular weight, the resonance frequency of the sensor was monitored for 24 h. Results revealed that QCM sensor irradiation with ultraviolet light with a wavelength of 365 nm and optical power of 1.5 mW caused a quite significant change in the polymer structure.

Preparation of Recyclable and Versatile Porous Poly(aryl thioether)s by Reversible Pd-Catalyzed C-S/C-S Metathesis

Porous organic materials (polymers and COFs) have shown a number of promising properties; however, the lability of their linkages often limits their robustness and can hamper downstream industrial application. Inspired by the outstanding chemical, mechanical, and thermal resistance of the 1D polymer poly(phenylene sulfide) (PPS), we have designed a new family of porous poly(aryl thioether)s, synthesized via a mild Pd-catalyzed C–S/C–S metathesis-based method, that merges the attractive features common to porous polymers and PPS in a single material. In addition, the method is highly modular, allowing to easily introduce application-oriented functionalities in the materials for a series of environmentally relevant applications including metal capture, metal sensing, and heterogeneous catalysis. Moreover, despite their extreme chemical resistance, the polymers can be easily recycled to recover the original monomers, offering an attractive perspective for their sustainable use. In a broader context, these results clearly demonstrate the untapped potential of emerging single-bond metathesis reactions in the preparation of new, recyclable materials.

Essential Oils from Citrus reticulata cv. Shatangju Peel: Optimization of Hydrodistillation Extraction by Response Surface Methodology and Evaluation of Their Specific Adhesive Effect to Polystyrene

Essential oil (Eo) from the Citrus reticulata peel has been widely used, and its adhesive effect on polystyrene (PS) was found accidentally. To analyze the essential oils of C. reticulata cv. Shatangju (CrspEos), the extraction of these oils by steam distillation was optimized using the response surface method. The chemical composition of CrspEos was analyzed by gas chromatography-mass spectrometry. Then, the adhesive effect of these essential oils on PS was evaluated. The adhesion area, the influence of adhesion on the thickness of the essential oil on the materials, the effect of adhesion on the transmittance of PS, the strength of adhesion point, and specificity of adhesion were determined. The optimum extraction conditions resulting in the extraction yield of 47.37 μL g^-1 were a ratio of liquid-to-solid of 8.94:1, a soaking time of 199.45 min, and an extraction time of 138.71 min. The major component in the essential oils was d-limonene (56.66%), followed by myrcene (6.62%). CrspEos presented a specific adherence effect on PS without influencing the thickness and transmittance of PS but with stronger tenacity than the parent material. CrspEos can be used as an environmentally friendly specific adhesive for PS.

100th Anniversary of Macromolecular Science Viewpoint: Toward Catalytic Chemical Recycling of Waste (and Future) Plastics

The current global materials economy has long been inefficient due to unproductive reuse and recycling efforts. Within the wider materials portfolio, plastics have been revolutionary to many industries but they have been treated as disposable commodities leading to their increasing accumulation in the environment as waste. The field of chemistry has had significant bearing in ushering in the current plastics industry and will undoubtedly have a hand in transforming it to become more sustainable. Existing approaches include the development of synthetic biodegradable plastics and turning to renewable raw materials in order to produce plastics similar to our current petrol-based materials or to create new polymers. Additionally, chemists are confronting the environmental crisis by developing alternative recycling methods to deal with the legacy of plastic waste. Important emergent technologies, such as catalytic chemical recycling or upcycling, have the potential to alleviate numerous issues related to our current and future refuse and, in doing so, help pivot our materials economy from linearity to circularity.

A general approach towards carbonization of plastic waste into a well-designed 3D porous carbon framework for super lithium-ion batteries

Due to the ever-increasing plastic waste causing serious environmental problems, it is highly desirable to recycle it into high-value-added products, such as carbon nanomaterials. However, the traditional catalytic carbonization of hydrocarbon polymers is severely prohibited by the complexity of real-world plastic waste due to the existence of halogen-containing polymers. In this study, through a universal combined template based on magnesium oxide and iron(iii) acetylacetonate (Fe(acac)₃), a three-dimensional hollow carbon sphere/porous carbon flake hybrid nanostructure is prepared from carbonization of plastic waste with high yields (>70 wt%). This approach is not only suitable for hydrocarbon polymers, but also for halogen-containing polymers. Interestingly, the obtained advanced carbon framework exhibits excellent performance in lithium-ion batteries (802 mA h g^-1 after 500 cycles at 0.5 A g^-1). The present research paves a new avenue to upcycle plastic waste into a high value-added product.

Transforming polystyrene waste into 3D hierarchically porous carbon for high-performance supercapacitors

Polystyrene (PS) is usually discarded as a solid waste after a short lifespan. Thus the disposal of waste PS is an inevitably worldwide issue because of their stable and non-biodegradable nature. Herein, a facile method was proposed to carbonize PS waste into novel three-dimensional (3D) hierarchically porous carbon using Fe₂O₃ particles as both catalyst and template. Furthermore, KOH activation was applied to generate microporous and mesopores on the wall of macropores. As a result, the obtained 3D hierarchically porous carbon exhibits a high specific capacitance of 284.1 F g^-1 at 0.5 A g^-1 and good rate performance of 198 F g^-1 at 20 A g^-1 in a three-electrode device. Moreover, the assembled symmetrical capacitor displays a high energy density of 19.2 W h kg^-1 at the power density of 200.7 W kg^-1 in aqueous electrolyte. Therefore, the present research develops a sustainable way to recycle waste plastics into 3D hierarchically porous carbon for supercapacitors.

A novel polythioether-based rhodamine B fluorescent probe via successive click reaction and its application in iron ion detection and cell imaging

Polythioether has good chemical stability and biocompatibility and is a kind of promising polymers for the application of optical materials, medical materials and energy conversion materials. However, the fluorescent probe based on polythioether is still rare. Herein, a series of polythioether based polymer fluorescent probes were synthesized by successive thiol click reaction under ultraviolet light at room temperature. The poly(thioether)s have good selectivity and responsiveness to iron ions and can be applied in cell imaging, which indicate that the broad application prospects of polythioether-based fluorescent probes in ion detection and bioimaging.

Co-Networks Poly(hydroxyalkanoates)-Terpenes to Enhance Antibacterial Properties

Biocompatible and biodegradable bacterial polyesters, poly(hydroxyalkanoates) (PHAs), were combined with linalool, a well-known monoterpene, extracted from spice plants to design novel antibacterial materials. Their chemical association by a photo-induced thiol-ene reaction provided materials having both high mechanical resistance and flexibility. The influence of the nature of the crosslinking agent and the weight ratio of linalool on the thermo-mechanical performances were carefully evaluated. The elongation at break increases from 7% for the native PHA to 40% for PHA-linalool co-networks using a tetrafunctional cross-linking agent. The materials highlighted tremendous anti-adherence properties against Escherichia coli and Staphylococcus aureus by increasing linalool ratios. A significant decrease in antibacterial adhesion of 63% and 82% was observed for E. coli and S. aureus, respectively.

Synthesis of Silane-Based Poly(thioether) via Successive Click Reaction and Their Applications in Ion Detection and Cell Imaging

A series of poly(thioether)s containing silicon atom with unconventional fluorescence were synthesized via successive thiol click reaction at room temperature. Although rigid π-conjugated structure did not exist in the polymer chain, the poly(thioether)s exhibited excellent fluorescent properties in solutions and showed visible blue fluorescence in living cells. The strong blue fluorescence can be attributed to the aggregation of lone pair electron of heteroatom and coordination between heteroatom and Si atom. In addition, the responsiveness of poly(thioether) to metal ions suggested that the selectivity of poly(thioether) to Fe³⁺ ion could be enhanced by end-modifying with different sulfhydryl compounds. This study further explored their application in cell imaging and studied their responsiveness to Fe³⁺ in living cells. It is expected that the described synthetic route could be extended to synthesize novel poly(thioether)s with superior optical properties. Their application in cell imaging and ion detection will broaden the range of application of poly(thioether)s.

From polystyrene waste to porous carbon flake and potential application in supercapacitor

Due to white pollution related environmental concern and sustainable development requirement, it is desirable to recycle the widely used plastic wastes into products with commercial value, such as high-valued carbon materials which can be applied in electrochemical fields. In this work, porous carbon flakes (PCFs) are produced by direct pyrolysis of polystyrene waste through template method. Furthermore, manganese dioxide (MnO₂) nanosheets are selectively deposited on the surface of resultant PCFs to form hybrid (PCF-MnO₂). Because of the large specific surface area (1087 m²/g) and high conductivity of PCFs, native high specific capacity of MnO₂, and positive synergistic interaction between PCF and MnO₂, the resulting hybrid materials show an ultrahigh capacitance of 308 F/g at 1 mV/s and 247 F/g at 1 A/g in LiCl electrolyte, and excellent cycle stability of 93.4% capacitance retention over 10,000 cycles at 10 A/g in symmetric supercapacitor device. This work demonstrates a convenient method for the preparation of cost-effective and high-performance electrode material for electric capacitor. More importantly, it provides a potential way to recycle polystyrene waste into high-valued product in large-scale with disposing of polymeric waste to alleviate environmental concerns.

Solvent-based separation and recycling of waste plastics: A review

Since the creation of first man-made plastic, the global production and consumption of plastics have been continuously increasing. However, because plastic materials are durable and very slow to degrade, they become waste with high staying power. The over-consumption, disposal, and littering of plastics result in pollution, thus causing serious environmental consequences. To date, only a fraction of waste plastics is reused and recycled. In fact, recycling plastics remains a great challenge because of technical challenges and relatively insufficient profits, especially in mixed plastics. This review focuses on an environmentally friendly and potentially profitable method for plastics separation and recovery and solvents extraction. It includes the dissolution/reprecipitation method and supercritical fluid extraction, which produce high-quality recovered plastics comparable to virgin materials. These methods are summarized and discussed taking mass-produced plastics (PS, PC, Polyolefins, PET, ABS, and PVC) as examples. To exploit the method, the quality and efficiency of solvent extraction are elaborated. By eliminating these technical challenges, the solvent extraction method is becoming more promising and sustainable for plastic issues and polymer markets.

Assessment of the Thermodynamic Properties of DL-p-Mentha-1,8-diene, 4-Isopropyl-1-Methylcyclohexene (DL-limonene) by Inverse Gas Chromatography (IGC)

Limonene is a colorless liquid hydrocarbon and had been investigated as a plasticizer for many plastics. Prediction of solubility between different materials is an advantage in many ways, one of the most convenient ways to know the compatibility of materials is to determine the degree of solubility of them in each other. The concept of "solubility parameter" can help practitioners in this way.In this study, inverse gas chromatography (IGC) method at infinite dilution was used for determination of the thermodynamic properties of DL-p-mentha-1,8-diene, 4-Isopropyl-1-methylcyclohexene (DL-limonene). The interaction between DL-limonene and 13 solvents were examined in the temperature range of 63-123°C through the assessment of the thermodynamic sorption parameters, the parameters of mixing at infinite dilution, the weight fraction activity coefficient and the Flory-Huggins interaction parameters. Additionally, the solubility parameter for DL-limonene and the temperature dependence of these parameters was investigated as well.Results show that there is a temperature dependence in solubility parameter, which increases by decreasing temperature. However, there were no specific dependence between interaction parameters and temperature, but chemical structure appeared to have a significant effect on them as well as on the type and strength of intermolecular interactions between DL-limonene and investigated solvents. The solubility parameter δ2 of DL-limonene determined to be 19.20 (J/cm3)0.5 at 25°C.

Dendrite Suppression by Synergistic Combination of Solid Polymer Electrolyte Crosslinked with Natural Terpenes and Lithium-Powder Anode for Lithium-Metal Batteries

Lithium-metal anode has fundamental problems concerning formation and growth of lithium dendrites, which prevents practical applications of next generation of high-capacity lithium-metal batteries. The synergistic combination of solid polymer electrolyte (SPE) crosslinked with naturally occurring terpenes and lithium-powder anode is promising solution to resolve the dendrite issues by substituting conventional liquid electrolyte/separator and lithium-foil anode system. A series of SPEs based on polysiloxane crosslinked with natural terpenes are prepared by facile thiol-ene click reaction under mild condition and the structural effect of terpene crosslinkers on electrochemical properties is studied. Lithium powder with large surface area is prepared by droplet emulsion technique (DET) and used as anode material. The effect of the physical state of electrolyte (solid/liquid) and morphology of lithium-metal anode (powder/foil) on dendrite growth behavior is systematically studied. The synergistic combination of SPE and lithium-powder anode suggests an effective solution to suppress the dendrite growth owing to the formation of a stable solid-electrolyte interface (SEI) layer and delocalized current density.

Poly(Limonene Thioether) Scaffold for Tissue Engineering

A photocurable thiol-ene network polymer, poly(limonene thioether) (PLT32o), is synthesized, characterized, fabricated into tissue engineering scaffolds, and demonstrated in vitro and in vivo. Micromolded PLT32o grids exhibit compliant, elastomeric mechanical behavior similar to grids made of poly(glycerol sebacate) (PGS), an established biomaterial. Multilayered PL32o scaffolds with regular, geometrically defined pore architectures support heart cell seeding and culture in a manner similar to multilayered PGS scaffolds. Subcutaneous implantation of multilayered PLT32o scaffolds with cultured heart cells provides long-term 3D structural support and retains the exogenous cells, whereas PGS scaffolds lose both their structural integrity and the exogenous cells over 31 d in vivo. PLT32o membrane implants retain their dry mass, whereas PGS implants lose 70 percent of their dry mass by day 31. Macrophages are initially recruited to PLT32o and PGS membrane implants but are no longer present by day 31. Facile synthesis and processing in combination with the capability to support heart cells in vitro and in vivo suggest that PLT32o can offer advantages for tissue engineering applications where prolonged in vivo maintenance of 3D structural integrity and elastomeric mechanical behavior are required.